Amendment No.8 to Form F-1
Table of Contents

As filed with the Securities and Exchange Commission on May 12, 2010

Registration No. 333-164432

 

 

 

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

AMENDMENT NO. 8

TO

FORM F-1

REGISTRATION STATEMENT

UNDER

THE SECURITIES ACT OF 1933

 

 

JinkoSolar Holding Co., Ltd.

(Exact name of registrant as specified in its charter)

Not Applicable

(Translation of Registrant’s name into English)

 

Cayman Islands   3674   Not Applicable

(State or other jurisdiction of

incorporation or organization)

 

(Primary Standard Industrial

Classification Code Number)

 

(I.R.S. Employer

Identification Number)

 

 

1 Jingke Road,

Shangrao Economic Development Zone

Jiangxi Province, 334100

People’s Republic of China

(86-793) 846-9699

(Address, including zip code, and telephone number, including area code, of registrant’s principal executive offices)

 

 

CT Corporation System

111 Eighth Avenue

New York, New York 10011

(212) 664-1666

(Name, address, including zip code, and telephone number, including area code, of agent for service)

 

 

Copies to:

 

Scott D. Clemens

Baker & McKenzie LLP

Suite 3401, China World Tower 2

China World Trade Center

1 Jianguomenwai Avenue

Beijing 100004, People’s Republic of China

(86-10) 6535-3971

 

Leiming Chen

Simpson Thacher & Bartlett LLP

ICBC Tower, 35th Floor

3 Garden Road

Central, Hong Kong

(852) 2514-7600

 

 

Approximate date of commencement of proposed sale to the public:    As soon as practicable after the effective date of this registration statement.

If any of the securities being registered on this form are to be offered on a delayed or continuous basis pursuant to Rule 415 under the Securities Act of 1933, check the following box.  ¨

If this Form is filed to register additional securities for an offering pursuant to Rule 462(b) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ¨

If this Form is a post-effective amendment filed pursuant to Rule 462(c) under the Securities Act, check the following box and list the Securities Act registration statement number of the earlier effective registration statement for the same offering.  ¨

If this Form is a post-effective amendment filed pursuant to Rule 462(d) under the Securities Act, check the following box and list the Securities Act registration statement number of the earliest effective registration statement for the same offering.  ¨

 

 

CALCULATION OF REGISTRATION FEE

 

 
Title of Each Class of Securities to be Registered(1)(2)   

Proposed Maximum
Aggregate Offering  Price(3)

  Amount of
Registration Fee

Ordinary shares, par value US$0.00002 per share

   US$87,233,250   US$6,220
 
 

 

(1)   American depositary shares issuable upon deposit of the ordinary shares registered hereby have been registered under a separate registration statement on Form F-6 (Registration No. 333-164523). Each American depositary share represents four ordinary shares.
(2)   Includes (a) all ordinary shares represented by American depositary shares initially offered and sold outside the United States that may be resold from time to time in the United States either as part of the distribution or within 40 days after the later of the effective date of this registration statement and the date the securities are first bona fide offered to the public, and (b) an aggregate of 3,501,000 ordinary shares represented by American depositary shares that are issuable upon the full exercise of the underwriters’ option to purchase additional shares, if any. These ordinary shares are not being registered for the purposes of sales outside of the United States.
(3)   Estimated solely for the purpose of determining the amount of registration fee in accordance with Rule 457(o) under the Securities Act of 1933.

The Registrant hereby amends this registration statement on such date or dates as may be necessary to delay its effective date until the Registrant shall file a further amendment which specifically states that this registration statement shall thereafter become effective in accordance with Section 8(a) of the Securities Act of 1933, as amended, or until the registration statement shall become effective on such date as the Securities and Exchange Commission, acting pursuant to said Section 8(a), may determine.

 

 

 


Table of Contents

The information in this preliminary prospectus is not complete and may be changed. We may not sell these securities until the registration statement filed with the Securities and Exchange Commission is effective. This preliminary prospectus is not an offer to sell these securities and we are not soliciting an offer to buy these securities in any jurisdiction where the offer or sale is not permitted.

 

SUBJECT TO COMPLETION

PRELIMINARY PROSPECTUS DATED MAY 12, 2010

5,835,000 American Depositary Shares

LOGO

JinkoSolar Holding Co., Ltd.

Representing 23,340,000 Ordinary Shares

This is the initial public offering of American depositary shares, or ADSs, of JinkoSolar Holding Co., Ltd., or JinkoSolar. JinkoSolar is offering 5,835,000 ADSs. Each ADS represents four ordinary shares, par value US$0.00002 per share, of JinkoSolar. The ADSs are evidenced by American depositary receipts, or ADRs.

Prior to this offering, there has been no public market for our ADSs or our ordinary shares. We anticipate that the initial public offering price per ADS will be between US$11.00 and US$13.00. We have received approval to list the ADSs on the New York Stock Exchange under the symbol “JKS.”

The underwriters have an option to purchase up to 875,250 additional ADSs from us at the initial public offering price, less the underwriting discount, to cover over-allotments of ADSs.

Investing in our ADSs involves risks. See “Risk Factors” beginning on page 15.

 

     Initial Public
Offering Price
   Underwriting
Discounts  and
Commissions
   Proceeds,
Before  Expenses,
to us

Per ADS

   US$                 US$                 US$             

Total

   US$                 US$                 US$             

Delivery of the ADSs will be made on or about                     , 2010.

Neither the Securities and Exchange Commission nor any state securities commission or other regulatory body has approved or disapproved of these securities or determined if this prospectus is truthful or complete. Any representation to the contrary is a criminal offense.

 

Credit Suisse

Oppenheimer & Co.   Roth Capital Partners   Collins Stewart

The date of this prospectus is                                         , 2010


Table of Contents

LOGO


Table of Contents

TABLE OF CONTENTS

 

     Page

PROSPECTUS SUMMARY

   1

RISK FACTORS

   15

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

   54

USE OF PROCEEDS

   56

CAPITALIZATION

   57

DILUTION

   58

DIVIDEND POLICY

   61

EXCHANGE RATE INFORMATION

   62

OUR CORPORATE HISTORY AND STRUCTURE

   63

SELECTED CONSOLIDATED FINANCIAL AND OPERATING DATA

   71

RECENT DEVELOPMENTS

   74

MANAGEMENTS DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

   78

OUR INDUSTRY

   114
     Page

BUSINESS

   123

MANAGEMENT

   151

PRINCIPAL SHAREHOLDERS

   158

RELATED PARTY TRANSACTIONS

   162

REGULATION

   169

DESCRIPTION OF SHARE CAPITAL

   176

DESCRIPTION OF AMERICAN DEPOSITARY SHARES

   195

SHARES ELIGIBLE FOR FUTURE SALE

   205

TAXATION

   207

UNDERWRITING

   213

ENFORCEABILITY OF CIVIL LIABILITIES

   220

LEGAL MATTERS

   222

EXPERTS

   222

WHERE YOU CAN FIND ADDITIONAL INFORMATION

   223

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

   F-1

 

 

You should rely only on the information contained in this document or to which we have referred you. We have not authorized anyone to provide you with information that is different. This document may only be used where it is legal to sell these securities. The information in this document may only be accurate on the date of this document.

Dealer Prospectus Delivery Obligation

Until             , 2010, all dealers that effect transactions in these securities, whether or not participating in this offering, may be required to deliver a prospectus. This is in addition to a dealer’s obligation to deliver a prospectus when acting as an underwriter and with respect to unsold allotments or subscriptions.

 

i


Table of Contents

PROSPECTUS SUMMARY

The following summary contains basic information about us and the ADSs we are offering. It may not contain all of the information that may be important to you. Before investing in the ADSs, you should read this entire prospectus carefully for a more complete understanding of our business and this offering, including our consolidated financial statements and related notes, and the sections entitled “Risk Factors” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included elsewhere in this prospectus.

In this prospectus, all references to “we,” “us,” “our company” and “our” refer to JinkoSolar Holding Co., Ltd., its current and former subsidiaries for the relevant periods, and, except where the context otherwise requires, the following variable interest entities, or VIEs, which were consolidated for the following relevant periods: (i) Shangrao Yangfan Electronic Materials Co., Ltd., or Yangfan, from June 6, 2006 to September 1, 2008; (ii) Shangrao Tiansheng Semiconductor Materials Co., Ltd., or Tiansheng, from June 6, 2006 to September 30, 2008; (iii) Shanghai Alvagen International Trading Co., Ltd., or Alvagen, from April 29, 2007 to September 1, 2008; and (iv) Shangrao Hexing Enterprise Co., Ltd., or Hexing, from September 3, 2007 to September 30, 2008.

Our Business

We are a fast-growing solar product manufacturer with low-cost operations based in Jiangxi Province and Zhejiang Province in China. We have built a vertically integrated solar product value chain from recovered silicon materials to solar modules. Our principal products are silicon wafers, solar cells and solar modules. Silicon wafers are thin sheets of crystalline silicon material used in the production of solar cells. Solar cells convert sunlight to electricity through the photovoltaic effect. Multiple solar cells are electrically interconnected and packaged into solar modules, which form the building blocks for solar power generating systems. We sell our products in China and to overseas markets.

Based on our significant focus on product quality and cost control and through building strong relationships with customers, suppliers and other industry players, since our inception as a supplier of recovered silicon materials in June 2006, we have rapidly moved downstream by vertically integrating critical stages of the solar power product value chain, including silicon ingots, silicon wafers, solar cells and solar modules through both organic growth and acquisition.

We currently operate in the following stages of the solar product value chain:

 

   

we process recoverable silicon materials and sell recovered silicon materials to the extent that we do not consume them for our own production;

 

   

we manufacture and sell monocrystalline and multicrystalline silicon ingots and wafers, with an annual silicon wafer production capacity of approximately 300 MW as of March 31, 2010;

 

   

we manufacture and sell solar cells with an annual solar cell production capacity of approximately 200 MW as of March 31, 2010; and

 

   

we manufacture and sell solar modules with an annual solar module production capacity of approximately 200 MW as of March 31, 2010.

We have broadened our customer base since we commenced commercial operations in June 2006 as a recovered silicon material supplier primarily for ReneSola Ltd., or ReneSola, a leading China-based silicon wafer

 

 

1


Table of Contents

manufacturer and a related party of ours. As of December 31, 2009, we had an aggregate of more than 440 silicon wafer, solar cell and solar module customers from China, Hong Kong, Taiwan, the Netherlands, Germany, the United States, India, Belgium, Singapore, Korea, France, Spain and Israel and other countries or regions. To achieve rapid expansion of our sales channels and broad market penetration, we sell our solar modules through overseas subsidiaries and sales agents, to distributors as well as directly to project developers and system integrators. In April 2010, we established a subsidiary in Germany to conduct sales, marketing and brand development for our products in the European market. We intend to establish similar subsidiaries in other major markets to expand our customer base and market penetration.

The global recession and credit market contraction seriously affected the demand for solar power products, including our products, during the second half of 2008 and the first half of 2009. However, since June 2009, the demand for solar power products has recovered significantly in response to a series of factors, including the recovery of the global economy and increasing availability of financing for solar power projects. Although selling prices for solar power products, including the average selling prices of our products, have generally stabilized at levels substantially below pre-crisis prices, there is no assurance that such prices may not decline again. In addition, demand for solar power products is significantly affected by government incentives adopted to make solar power competitive with conventional fossil fuel power. The widespread implementation of such incentive policies, as has occurred in many countries in Europe, Asia Pacific and North America, has significantly stimulated demand, whereas reductions or limitations on such policies, as have recently been announced in Germany, Spain and South Korea, can reduce demand for such products. We believe that demand will continue to grow rapidly as solar power becomes an increasingly important source of renewable energy. To take advantage of the opportunity created by this expected growth, we plan to further increase our annual silicon wafer and solar module production capacity to approximately 500 MW each and annual solar cell production capacity to approximately 400 MW by the end of 2010.

We have established our manufacturing bases in Shangrao, Jiangxi Province and Haining, Zhejiang Province to capitalize on the cost advantages offered by Shangrao and Haining in large-scale manufacturing of solar power products. We have established a sales and marketing center in Shanghai because of its convenient location for our customers, suppliers and our sales and marketing teams. We believe that the choice of Shangrao and Haining for our manufacturing bases provides us with convenient and timely access to key resources and conditions as well as our customer base to support our rapid growth and low-cost manufacturing operations. We also believe that our ability to source and process large volumes of recoverable silicon materials provides us with a further cost advantage over competitors who rely primarily on more expensive virgin polysilicon or purchase recovered silicon materials for their production.

We have achieved sustained and profitable growth since our inception in June 2006, although in 2009, our sales and net income were materially and adversely affected by the global recession and credit market contraction. Our revenues were RMB116.2 million for the period from June 6, 2006 to December 31, 2006, RMB709.2 million for the year ended December 31, 2007, RMB2,183.6 million for the year ended December 31, 2008 and RMB1,567.9 million (US$229.7 million) for the year ended December 31, 2009, respectively. We recorded a net loss of RMB1.4 million for the period from June 6, 2006 to December 31, 2006. We had net income of RMB76.0 million, RMB218.7 million and RMB85.4 million (US$12.5 million), respectively, for the years ended December 31, 2007, 2008 and 2009.

Our Industry

Solar power has emerged as one of the most rapidly growing renewable energy sources. Through a process known as the photovoltaic, or PV, effect, electricity is generated by solar cells that convert sunlight into electricity. In general, global solar cell production can be categorized by three different types of technologies,

 

 

2


Table of Contents

namely, monocrystalline silicon, multicrystalline silicon and thin film technologies. Crystalline silicon technology is currently the most commonly used, accounting for 81.8% of solar cell production in 2009, according to Solarbuzz LLC, or Solarbuzz, an independent international solar energy consulting company, compared to 18.2% for thin-film-based solar cells.

Although PV technology has been used for several decades, the solar power market grew significantly only in the past several years. According to Solarbuzz, the world PV market, defined as relating to the total MW of modules delivered to installation sites, grew at an average compound annual growth rate, or CAGR, of 50% from 1,460 MW in 2005 to 7,300 MW in 2009. According to Solarbuzz, under the “Balanced Energy” forecast scenario, the lowest of three forecast scenarios, the world PV market is expected to reach 8,440 MW in 2010.

Despite the contraction in demand for solar power products during the second half of 2008 and the first half of 2009 resulting from the global recession and credit market contraction, we believe that demand for solar power products has recovered significantly in response to a series of factors, including the recovery of the global economy and increasing availability of financing for solar power projects. Although selling prices for solar power products, including the average selling prices of our products, have generally stabilized at levels substantially below pre-crisis prices, there is no assurance that such prices may not decline again. In addition, demand for solar power products is significantly affected by government incentives adopted to make solar power competitive with conventional fossil fuel power. The widespread implementation of such incentive policies, as has occurred in many countries in Europe, Asia Pacific and North America, has significantly stimulated demand, whereas reductions or limitations on such policies, as have recently been announced in Germany, Spain and South Korea, can reduce demand for such products. We believe that demand will continue to grow rapidly in the long term as solar power becomes an increasingly important source of renewable energy. We believe the following factors will drive demand in the global solar power industry, including demand for our products:

 

   

advantages of solar power;

 

   

long-term growth in demand for alternative sources of energy;

 

   

government incentives for solar power; and

 

   

decreasing costs of solar energy.

We believe the following are the key challenges presently facing the solar power industry:

 

   

high cost of solar power compared with other sources of energy;

 

   

lack of financing for solar power projects;

 

   

continuing reliance on government subsidies and incentives; and

 

   

the need to promote awareness and acceptance of solar power usage.

Our Competitive Strengths

We believe that the following strengths enable us to compete successfully in the solar power industry:

 

   

our ability to provide high-quality products enables us to increase our sales and enhance our brand recognition;

 

   

we have been able to build an increasingly diversified customer base;

 

   

our strategic locations provide us with convenient access to key resources and conditions to support our rapid growth and low-cost manufacturing operations;

 

   

our in-house recoverable silicon material processing operations provide us with a low-cost source for a substantial part of our silicon materials requirements;

 

 

3


Table of Contents
   

our efficient, state-of-the-art production equipment and proprietary process technologies enable us to enhance our productivity; and

 

   

we are led by a strong management team with demonstrated execution capabilities and ability to adapt to rapidly changing economic conditions.

Our Strategies

In order to achieve our goal of becoming a leading vertically integrated supplier of solar power products, we intend to pursue the following principal strategies:

 

   

further develop our vertically integrated business model;

 

   

continue to prudently invest in the coordinated expansion of our production capacity to achieve rapid and sustained growth and improve our profitability;

 

   

continue to enhance our research and development capability with a focus on improving our manufacturing processes to reduce our average cost and improve the quality of our products;

 

   

expand our sales and marketing network and enhance our sales and marketing channels both in and outside China; and

 

   

diversify and strengthen our customer relationships while securing silicon raw material supplies at competitive cost.

Our Challenges

We believe that the following are some of the major challenges, risks and uncertainties that may materially affect us:

 

   

we may be adversely affected by volatile market and industry trends, in particular, the demand for our solar power products may decline, which may reduce our revenues and earnings;

 

   

a significant reduction in or discontinuation of government subsidies and economic incentives for installation of solar energy systems may have a material adverse effect on our results of operations;

 

   

our limited operating history makes it difficult to evaluate our results of operations and prospects;

 

   

notwithstanding our continuing efforts to further diversify our customer base, we derive, and expect to continue to derive, a significant portion of our revenues from a limited number of customers. As a result, the loss of, or a significant reduction in orders from, any of these customers would significantly reduce our revenues and harm our results of operations;

 

   

our failure to successfully execute our business expansion plans would have a material adverse effect on the growth of our sales and earnings;

 

   

as polysilicon supply increases, the corresponding increase in the global supply of the downstream solar power products including our products may cause substantial downward pressure on the prices of our products and reduce our revenues and earnings;

 

   

we may not be able to obtain sufficient silicon raw materials in a timely manner, which could have a material adverse effect on our results of operations and financial condition; and

 

   

volatility in the prices of silicon raw materials makes our procurement planning challenging and could have a material adverse effect on our results of operations and financial condition.

Please see “Risk Factors” beginning on page 15 and other information included in this prospectus for a discussion of these and other risks and uncertainties.

 

 

4


Table of Contents

Our Corporate History and Structure

We are a Cayman Islands holding company and conduct substantially all of our business through our operating subsidiaries in China, Jinko Solar Co., Ltd., or Jiangxi Jinko, and Zhejiang Jinko Solar Co., Ltd., or Zhejiang Jinko. We own 100% of the equity interest in Paker Technology Limited, or Paker, a Hong Kong holding company, which owns 100% of the equity interest in Jiangxi Jinko. Paker and Jiangxi Jinko own 25% and 75%, respectively, of the equity interest in Zhejiang Jinko.

We have also established a number of subsidiaries to provide sales and marketing, payment settlement and logistics services to support our overseas expansion. JinkoSolar International Limited and JinkoSolar GmbH, which are incorporated in Hong Kong and Germany, respectively, are strategically located to increase our visibility and penetration in target market regions. In addition, Jinko Solar Import and Export Co., Ltd., or Jinko Import and Export, was established to facilitate our import and export activities in the PRC.

The following diagram illustrates our corporate structure and the place of organization and ownership interest of each of our subsidiaries immediately before this offering:

LOGO

We commenced our operations in June 2006 through our then consolidated subsidiary Jiangxi Desun Energy Co., Ltd., or Jiangxi Desun. On November 10, 2006, Paker was established in Hong Kong. On December 13, 2006, Paker established Jiangxi Jinko as our wholly-owned operating subsidiary in China. Jiangxi Desun ceased its solar power business in June 2008. In July 2008, we completed a domestic restructuring, or the 2008 Restructuring, pursuant to which Paker disposed of its interest in Jiangxi Desun.

On May 30, 2008, Paker issued an aggregate of 107,503 series A redeemable convertible preferred shares to Flagship Desun Shares Co., Limited, or Flagship, and Everbest International Capital Limited, or Everbest, and 14,629 ordinary shares to Wealth Plan Investments Limited, or Wealth Plan, in consideration for its consultancy services related to the issuance of series A redeemable convertible preferred shares.

On September 18, 2008, Paker issued an aggregate of 148,829 series B redeemable convertible preferred shares to SCGC Capital Holding Company Limited, or SCGC, CIVC Investment Ltd., or CIVC, Pitango Venture Capital Fund V, L.P. and Pitango Venture Capital Principals Fund V, L.P., or Pintango, TDR Investment Holdings Corporation, or TDR, and New Goldensea (Hong Kong) Group Company Limited, or New Goldensea.

On December 16, 2008, we undertook a share exchange pursuant to which all the then existing shareholders of Paker exchanged their respective shares in Paker for our newly issued shares of the same class and Paker became our wholly-owned subsidiary. Consequently, shareholders of Paker immediately before the share exchange became our shareholders, holding the same number of shares and of the same classes in us (without

 

 

5


Table of Contents

giving effect to the share split on September 15, 2009 discussed below) as in Paker immediately before the share exchange. JinkoSolar was registered as the sole shareholder of Paker on February 9, 2009. Subsequently, our founders and substantial shareholders, Xiande Li, Kangping Chen and Xianhua Li, transferred their shares in us to Brilliant Win Holdings Limited, or Brilliant, Yale Pride Limited, or Yale Pride, and Peaky Investments Limited, or Peaky, on December 16, 2008. Brilliant was owned by Xiande Li, Yale Pride was owned by Kangping Chen and Peaky was owned by Xianhua Li.

On June 26, 2009, Paker acquired 25%, and on June 30, 2009, Jiangxi Jinko acquired 75%, respectively, of the equity interest in Zhejiang Sun Valley Energy Application Technology Co., Ltd., or Sun Valley, a solar cell supplier which was also one of our largest silicon wafer customers by revenue before the acquisition. As a result, Sun Valley became our wholly-owned subsidiary. Subsequently, we changed the name of Sun Valley to Zhejiang Jinko Solar Co., Ltd., or Zhejiang Jinko, on August 10, 2009.

On September 15, 2009, we effected a share split with the result of each share becoming 50 shares of the same class, or the 2009 Share Split, pursuant to which each of the ordinary shares, series A redeemable convertible preferred shares and series B redeemable convertible preferred shares was subdivided into 50 shares of the relevant class.

On September 15, 2009, our founders and substantial shareholders, Xiande Li, Kangping Chen and Xianhua Li, through Brilliant, Yale Pride and Peaky, respectively, ratably transferred an aggregate of 3,812,900 ordinary shares to the holders of series B redeemable convertible preferred shares and an aggregate of 701,550 ordinary shares to Flagship.

On November 25, 2009, Paker established JinkoSolar International Limited, a trading company incorporated in Hong Kong, to facilitate settlement of payments and our overseas sales and marketing efforts.

On December 24, 2009, Jiangxi Jinko and Xiande Li established Jinko Import and Export, which subsequently became Jiangxi Jinko’s wholly-owned subsidiary before Xiande Li made any capital contribution to Jinko Import and Export. In addition to conducting sales, Jinko Import and Export coordinates our sales activities with production at our operating subsidiaries and facilitates our import and export activities in the PRC.

On April 1, 2010, Paker established JinkoSolar GmbH, a limited liability company incorporated in Germany, to establish a presence in Europe, expand our sales and marketing network and increase our brand recognition in strategic markets within the region.

Immediately before the completion of this offering, each of Brilliant, Yale Pride and Peaky will become wholly owned by HSBC International Trustee Limited in its capacity as trustee, with each of Brilliant, Yale Pride and Peaky being held under a separate irrevocable trust constituted under the laws of the Cayman Islands.

Corporate Information

Our principal executive office is located at 1 Jingke Road, Shangrao Economic Development Zone, Jiangxi Province, 334100, People’s Republic of China. Our telephone number at this address is (86-793) 846-9699 and our fax number is (86-793) 846-1152. Our registered office in the Cayman Islands is Cricket Square, Hutchins Drive, P.O. Box 2681, Grand Cayman, KY1-1111, Cayman Islands.

Investor inquiries should be directed to us at the address and telephone number of our principal executive office set forth above. Our website is www.jinkosolar.com. The information contained on our website is not part of this prospectus. Our agent for service of process in the United States is CT Corporation System, located at 111 Eighth Avenue, New York, New York 10011.

 

 

6


Table of Contents

Conventions That Apply to This Prospectus

Except where the context otherwise requires and for purposes of this prospectus only:

 

   

“Euro” or “€” refers to the legal currency of the European Union;

 

   

“HK$” or “Hong Kong dollar” refers to the legal currency of Hong Kong;

 

   

“Jiangxi Desun” refers to Jiangxi Desun Energy Co., Ltd., an entity in which our founders and substantial shareholders, Xiande Li, Kangping Chen and Xianhua Li, each holds more than 10%, and collectively hold 73%, of the equity interest; Jiangxi Desun’s financial results were consolidated into our financial statements from June 6, 2006 to July 28, 2008;

 

   

“Jiangxi Jinko” refers to Jinko Solar Co., Ltd., our wholly-owned operating subsidiary incorporated in the PRC;

 

   

“June 2009 Modification” refers to (i) the agreement our founders and holders of series B redeemable convertible preferred reached on June 22, 2009 to amend the commitment letter executed and delivered by our founders to the holders of series B redeemable convertible preferred shares on December 16, 2008 in connection with the investment by the holders of our series B redeemable convertible preferred shares in us and (ii) the agreement among our founders and Flagship on July 22, 2009, both as described in “Description of Share Capital — History of Share Issuances and Other Financings — June 2009 Modification”;

 

   

“June 6, 2006” refers to the inception of our business;

 

   

“long-term supply contracts” refers to our polysilicon supply contracts with terms of one year or above;

 

   

“Photon Consulting Silicon Price Index” or “PCSPI” is an index of virgin polysilicon prices compiled and published by Photon Consulting LLC., an independent consulting firm. PCSPI is a weighted index in which silicon prices reported by each survey participant are weighted to reflect the nuances found in the length of reported silicon contracts, prepayments and price digression. The PCSPI relies on data gathered from survey participants with exposure to silicon contract and spot prices. The current organizational composition of the index includes both privately held and publicly traded buyers (consumers), sellers (producers) and trading companies located in North America, Asia and Europe.

 

   

“PRC” or “China” refers to the People’s Republic of China, excluding, for purposes of this prospectus, Taiwan, Hong Kong and Macau;

 

   

“Qualified IPO” refers to a fully underwritten initial public offering of our shares or ADSs with a listing on the New York Stock Exchange, or the NYSE;

 

   

“RMB” or “Renminbi” refers to the legal currency of China;

 

   

“September 2009 Modification” refers to the modifications to certain terms of the investment by the holders of series A and series B redeemable convertible preferred shares in us, as described in “Description of Share Capital — History of Share Issuances and Other Financings — September 2009 Modification;”

 

   

“series A redeemable convertible preferred shares” refers to our series A redeemable convertible preferred shares, par value US$0.00002 per share;

 

   

“series B redeemable convertible preferred shares” refers to our series B redeemable convertible preferred shares, par value US$0.00002 per share;

 

   

“US$,” “dollars” or “U.S. dollars” refers to the legal currency of the United States;

 

 

7


Table of Contents
   

“watt” or “W” refers to the measurement of total electrical power, where “kilowatt” or “kW” means one thousand watts and “megawatts” or “MW” means one million watts;

 

   

“Wp” refers to watt-peak, a measurement of power output, most often used in relation to photovoltaic solar energy devices;

 

   

“Xinwei” refers to Shangrao Xinwei Industry Co., Ltd., our PRC subsidiary from July 16, 2007 to December 28, 2007; and

 

   

“Zhejiang Jinko” refers to Zhejiang Jinko Solar Co., Ltd., formerly Zhejiang Sun Valley Energy Application Technology Co., Ltd., a solar cell supplier incorporated in the PRC which has been our wholly-owned subsidiary since June 30, 2009.

Unless we indicate otherwise or in “Our Corporate History and Structure — Offshore Reorganization”, all references to numbers of shares, price per share, earnings per share and par value per share of JinkoSolar have been adjusted to give effect to the 2009 Share Split, which resulted in each share becoming 50 shares of the same class.

Unless we indicate otherwise, all information in this prospectus assumes that the underwriters do not exercise their option to purchase additional ADSs.

This prospectus contains translations of certain Renminbi amounts into U.S. dollars at the rate of RMB6.8259 to US$1.00, the noon buying rate on December 31, 2009, as set forth in the H.10 statistical release of the Federal Reserve Board. We make no representation that the Renminbi or U.S. dollar amounts referred to in this prospectus could have been or could be converted into U.S. dollars or Renminbi, as the case may be, at any particular rate or at all. On May 7, 2010, the exchange rate was RMB6.8254 to US$1.00.

Consistent with industry practice, we measure our silicon wafer, solar cell and solar module production capacity and production output in MW, representing 1,000,000 watts of power-generating capacity. We believe MW is a more appropriate unit to measure our silicon wafer, solar cell and solar module production capacity and production output compared to number of silicon wafers, solar cells and solar modules, as our silicon wafers, solar cells and solar modules are or will be of different sizes. Furthermore, we manufacture both monocrystalline wafers and multicrystalline wafers, which have different conversion efficiencies. For purposes of this prospectus, we have assumed an average conversion efficiency rate of 16.5% for solar cells using our monocrystalline wafers. This conversion efficiency is estimated based on the data provided by our top three customers for monocrystalline wafers based on our 2008 revenues for monocrystalline wafer sales and is highly dependent on the solar cell and solar module production processes of these customers. Based on this conversion efficiency, we have assumed that each 125 millimeter, or mm, by 125 mm monocrystalline wafer we produce can generate approximately 2.45 W of power, and that each 156 mm by 156 mm monocrystalline wafer we produce can generate approximately 4.02 W of power. We have also assumed an average conversion efficiency rate of 15.0% for solar cells using our multicrystalline wafers. This conversion efficiency is estimated based on the data provided by our top three customers for multicrystalline wafers based on our 2008 revenues for multicrystalline wafer sales and is highly dependent on the solar cell and module production processes of these customers. Based on this conversion efficiency, we have assumed that each 156 mm by 156 mm multicrystalline wafer that we produce can generate approximately 3.65 W of power. We also measure our silicon ingot manufacturing capacity and production output in MW according to the silicon wafers in MW that our current manufacturing processes generally yield.

 

 

8


Table of Contents

THE OFFERING

 

Price per ADS

   We currently estimate the initial public offering price will be between US$11.00 and US$13.00 per ADS.

ADSs offered by us

   5,835,000 ADSs

Ordinary shares outstanding immediately after this offering

  

86,927,850 ordinary shares

 

The number of ordinary shares outstanding immediately after the offering:

 

•   assumes the conversion of all outstanding series A redeemable convertible preferred shares into 5,375,150 ordinary shares upon completion of the offering;

 

•   assumes the conversion of all outstanding series B redeemable convertible preferred shares into 7,481,250 ordinary shares upon the completion of the offering;

 

•   excludes 4,536,480 ordinary shares issuable upon the exercise of outstanding options granted under our long-term incentive plan; and

 

•   excludes a further 2,788,642 ordinary shares reserved for issuance under our long-term incentive plan.

The ADSs

   Each ADS represents four ordinary shares, par value US$0.00002 per share. The ADSs will be evidenced by a global ADR.
   The depositary will be the holder of the ordinary shares underlying the ADSs and you will have the rights of an ADS holder as provided in the deposit agreement among us, the depositary and owners and beneficial owners of ADSs from time to time.
   You may surrender your ADSs to the depositary to withdraw the ordinary shares underlying your ADSs. The depositary will charge you a fee for such an exchange.
   We may amend or terminate the deposit agreement for any reason without your consent. If an amendment becomes effective, you will be bound by the deposit agreement as amended if you continue to hold your ADSs.
   To better understand the terms of the ADSs, you should carefully read the section in this prospectus entitled “Description of American Depositary Shares.” We also encourage you to read the deposit agreement, which is an exhibit to the registration statement that includes this prospectus.

 

 

9


Table of Contents

Option to purchase additional ADSs

   We have granted the underwriters an option, exercisable within 30 days from the date of this prospectus, to purchase up to an aggregate of 875,250 additional ADSs.

Use of proceeds

   We estimate that we will receive net proceeds from this offering of approximately US$60.1 million (or US$69.7 million if the underwriters exercise the option to purchase additional ADSs from us in full), assuming an initial public offering price of US$12.00 per ADS, being the midpoint of the estimated range of the initial public offering price after deducting underwriting discounts and estimated aggregate offering expenses payable by us.
   We intend to use the net proceeds from this offering primarily for the following purposes:
  

•  approximately US$50 million to expand our silicon ingot, silicon wafer, solar cell and solar module production capacity, including procuring new equipment and expanding or constructing manufacturing facilities for silicon ingot, silicon wafer, solar cell and solar module production;

  

•  approximately US$5 million to invest in research and development to improve product quality, reduce manufacturing costs, improve conversion efficiency and overall performance of our products and improve the productivity of our silicon ingot, silicon wafer, solar cell and solar module manufacturing process; and

  

•  the balance of the net proceeds from this offering to be used as working capital and other general corporate purposes.

   See “Use of Proceeds” for additional information.

Risk factors

   See “Risk Factors” and other information included in this prospectus for a discussion of the risks you should carefully consider before deciding to invest in our ADSs.

Listing

   We have received approval to list the ADSs on the NYSE. Our ordinary shares will not be listed on any exchange or quoted for trading on any over-the-counter trading system.

NYSE trading symbol

  

“JKS”

Depositary

  

JPMorgan Chase Bank, N.A.

Lock-up

  

We have agreed for a period of 180 days after the date of this prospectus not to sell, transfer or otherwise dispose of any of our ordinary shares, all of our existing ADSs or similar securities. Furthermore, each of our shareholders, directors and executive officers has agreed to a similar 180-day lock-up. See “Underwriting.”

 

 

10


Table of Contents

Payment and settlement

   The ADSs are expected to be delivered against payment on         , 2010. They will be deposited with a custodian for, and registered in the name of a nominee of, The Depository Trust Company, or DTC, in New York, New York. Initially, beneficial interests in the ADSs will be shown on, and transfers of these beneficial interest will be effected through, records maintained by DTC and its direct and indirect participants.

 

 

11


Table of Contents

SUMMARY CONSOLIDATED FINANCIAL AND OPERATING DATA

The following summary consolidated statements of operations data and other consolidated financial and operating data for the period from June 6, 2006 to December 31, 2006 and consolidated balance sheet data as of December 31, 2006 and 2007 have been derived from our audited consolidated financial statements not included in this prospectus. The following summary consolidated statements of operations data and other consolidated financial and operating data for the years ended December 31, 2007, 2008 and 2009 and the consolidated balance sheet data as of December 31, 2008 and 2009 have been derived from our audited consolidated financial statements, which are included elsewhere in this prospectus. Our audited consolidated financial statements have been prepared and presented in accordance with accounting principles generally accepted in the United States, or U.S. GAAP, and have been audited by PricewaterhouseCoopers Zhong Tian CPAs Limited Company, an independent registered public accounting firm.

You should read the summary consolidated financial and operating data in conjunction with our consolidated financial statements and related notes, “Selected Consolidated Financial and Operating Data” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included elsewhere in this prospectus. Our historical results do not necessarily indicate our expected results for any future periods. We have determined that we were no longer the primary beneficiary of Yangfan and Alvagen as of September 1, 2008 and Tiansheng and Hexing were no longer VIEs as of September 30, 2008. As a result, we were no longer required to consolidate their financial results with ours as of September 1, 2008 and September 30, 2008, respectively.

 

    For the Period
from
June 6, 2006
to
December 31,
    For the Year Ended December 31,  
    2006     2007     2008     2009     2009  
    (RMB)     (RMB)     (RMB)     (RMB)     (US$)  
    (in thousands, except share and per share data)  

Consolidated Statements of Operations Data:

         

Revenues

  116,234.2      709,152.9      2,183,614.1      1,567,859.6      229,692.7   

Cost of revenues

  (115,770.9   (621,024.0   (1,872,088.6   (1,337,647.5   (195,966.5

Gross profit

  463.3      88,128.9      311,525.5      230,212.1      33,726.2   

Total operating expenses

  (1,872.5   (12,540.3   (40,271.7   (107,739.5   (15,783.9

(Loss)/Income from operations

  (1,409.2   75,588.6      271,253.8      122,472.6      17,942.3   

Interest income/(expenses), net

  7.0      (321.9   (6,323.9   (29,936.8   (4,385.8

Subsidy income

       546.8      637.3      8,569.1      1,255.4   

Investment (loss)/gain

            (10,165.5   82.1      12.0   

Exchange loss

  (1.1   (68.0   (4,979.8   (2,181.5   (319.6

Other income/(expenses), net

  33.4      300.0      (490.1   (1,338.6   (196.1

Change in fair value of derivatives

            (29,812.7   (13,599.3   (1,992.3

(Loss)/Income before income taxes

  (1,369.9   76,045.5      220,119.1      84,067.6      12,315.9   

Income taxes

            (822.3   1,342.0      196.6   

Net (loss)/income

  (1,369.9   76,045.5      219,296.8      85,409.6      12,512.5   

Less: Net income attributable to the non-controlling interests

            (576.8          

Net (loss)/income attributable to JinkoSolar Holding Co., Ltd.

  (1,369.9   76,045.5      218,720.0      85,409.6      12,512.5   

Net (loss)/income attributable to JinkoSolar Holding Co., Ltd’s ordinary shareholders per share
basic and diluted

  (0.11   2.19      3.52      (0.73   (0.11

Net (loss)/income attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders per ADS(1)
basic and diluted

  (0.44   8.77      14.10      (2.93   (0.43

Weighted average ordinary shares outstanding
basic and diluted

  12,500,000      34,691,800      50,429,700      50,731,450      50,731,450   

 

(1)   Each ADS represents four ordinary shares

 

 

12


Table of Contents
    As of December 31,
    2006   2007   2008   2009   2009
    (RMB)   (RMB)   (RMB)   (RMB)   (US$)
    (in thousands)

Consolidated Balance Sheets Data:

         

Cash and cash equivalent

  8,508.0   27,242.2   27,323.6   152,479.6   22,338.4

Restricted cash

      9,622.0   72,827.2   10,669.2

Accounts receivable — a related party

      69,062.1   100.4   14.7

Accounts receivable — third parties

    228.4   8,039.5   236,796.6   34,691.9

Advances to suppliers

  39,776.5   151,455.7   110,638.3   93,324.1   13,672.1

Inventories

  11,376.3   172,134.9   272,030.5   245,192.4   35,920.9

Total current assets

  66,174.1   398,470.1   528,980.4   970,650.4   142,201.1

Property, plant and equipment, net

  9,778.1   57,479.4   352,929.5   741,481.4   108,627.6

Land use rights, net

  1,810.9   6,962.0   165,509.6   228,377.5   33,457.5

Advances to suppliers to be utilized beyond one year

      187,270.6   230,899.5   33,827.0

Total assets

  77,763.1   559,279.8   1,278,020.4   2,242,649.3   328,550.0

Accounts payable

  844.9   8,721.3   23,985.3   99,932.8   14,640.2

Notes payable

        81,643.2   11,960.8

Advance from a related party

  49,810.6   92,433.3      

Advance from third party customers

    162,001.8   184,749.0   36,777.8   5,388.0

Derivative liabilities

      30,017.4   54.9   8.0

Short-term borrowings from third parties

  1,000.0   22,990.0   150,000.0   576,084.0   84,396.8

Total current liabilities

  66,115.5   310,922.2   481,330.6   946,782.3   138,704.4

Long-term borrowings

        348,750.0   51,092.2

Total liabilities

  66,115.5   372,585.9   485,043.7   1,299,811.8   190,423.5

Series A redeemable convertible preferred shares

      157,224.9   189,057.9   27,697.1

Series B redeemable convertible preferred shares

      245,402.2   287,703.8   42,148.8

Total JinkoSolar Holding Co., Ltd. shareholders’ equity

  5,707.6   175,753.9   390,349.6   466,075.8   68,280.5

Non-controlling interests

  5,940.1   10,940.1      

Total liabilities and equity

  77,763.1   559,279.8   1,278,020.4   2,242,649.3   328,550.0

The following tables set forth certain other financial and operating data of our company for the periods since we commenced operations on June 6, 2006. Gross margin, operating margin and net margin represent the gross profit, (loss)/income from operations and net (loss)/income as a percentage of our revenues, respectively.

 

     For the
Period from
June 6,
2006 to
December 31,
    For the Year Ended December 31,  
     2006     2007     2008     2009  
     (RMB in thousands, except percentages)  

Other Financial Data:

        

Gross margin

   0.4   12.4   14.3   14.7

Operating margin

   (1.2 %)    10.7   12.4   8.0

Net margin

   (1.2 %)    10.7   10.0   5.6

Total revenues:

        

Sales of recovered silicon materials

   116,234.2      536,755.2      902,249.0      28,039.4   

Sales of silicon ingots

        170,007.2      483,544.9      98.9   

Sales of silicon wafers

             794,860.1      1,102,232.8   

Sales of solar cells

                  225,866.3   

Sales of solar modules

                  182,015.1   

Processing service fees

        2,390.5      2,960.1      29,607.1   

 

 

13


Table of Contents
     For the
Period from
June 6,
2006 to
December 31,
   For the Year Ended
December 31,
 
     2006    2007    2008    2009  

Operating Data:

           

Sales volume:

           

Recovered silicon materials (metric tons)

   128.3    349.1    397.9    11.7   

Silicon ingots (MW)

      12.6    33.1    0.01   

Silicon wafers (MW)

         51.4    180.4   

Solar cells (MW)

            27.3   

Solar modules (MW)

            14.4   

Average selling price (RMB):

           

Recovered silicon materials (per kilogram)

   906.0    1,537.5    2,267.5    2,397.1 (1) 

Silicon ingot (per watt)

      13.5    14.6    6.8   

Silicon wafer (per watt)

         15.5    6.1   

Solar cells (per watt)

            8.3   

Solar modules (per watt)

            12.7   

 

(1)   Sales were contracted in 2008 prior to the significant decrease in selling price and made in the first quarter of 2009.

 

 

14


Table of Contents

RISK FACTORS

An investment in our ADSs involves significant risks. You should carefully consider the risks described below and the other information in this prospectus, including our consolidated financial statements and related notes included elsewhere in this prospectus, before you decide to buy our ADSs. If any of the following risks actually occurs, our business, prospects, financial condition and results of operations could be materially harmed, the trading price of our ADSs could decline and you could lose all or part of your investment.

Risks Related to Our Business and Our Industry

We may be adversely affected by volatile market and industry trends, in particular, the demand for our solar power products may decline, which may reduce our revenues and earnings.

We are affected by solar power market and industry trends. In the fourth quarter of 2008 and the first half of 2009, the global solar power industry experienced a significant decline in demand due to decreased availability of financing for downstream buyers of solar power products as a result of the global recession. Meanwhile, the manufacturing capacity of solar power products increased during the same period. As a result, the prices of solar power products declined significantly. The prices of solar power products further declined for the remainder of 2009 primarily due to decreased prices of silicon materials and increased manufacturing capacity. During the same period, however, lowered costs of raw materials reduced the cost of producing solar power products. As the global economy has significantly recovered since June 2009 and availability of financing for solar power projects has increased, coupled with the decreased average selling prices of solar power products, demand for solar power products has increased since the second half of 2009. However, if demand for solar power products declines again and the supply of solar power products continues to grow, the average selling price of our products will be materially and adversely affected.

The demand for solar power products is also influenced by macroeconomic factors such as the global economic downturn, the supply and prices of other energy products, such as oil, coal and natural gas, as well as government regulations and policies concerning the electric utility industry. A decrease in oil prices, for example, may reduce demand for investment in alternative energy. The global economic downturn, which affects the availability of financing, also contributed to decreased sales and shipments of solar power products and the slowdown of the solar project market. If these negative market and industry trends continue and the prices of our solar power products continue to decrease as a result, our business and results of operations may be materially and adversely affected.

A significant reduction in or discontinuation of government subsidies and economic incentives for installation of solar energy systems may have a material adverse effect on our results of operations.

A majority of our products sold are eventually incorporated into solar power systems, which are utilized in both the on-grid and off-grid markets. In the case of on-grid applications, the solar power systems are connected to the utility grid and generate electricity which is then fed into the grid, while in the case of the off-grid applications, the solar power systems are not connected to the power grids. We believe that the near-term growth of the market for on-grid and off-grid applications of solar power systems depends substantially on government incentives because the cost of solar power continues to substantially exceed the cost of conventional power in many locations around the world. Various governments have used different policy initiatives to encourage or accelerate the development and adoption of solar power and other renewable energy sources. Countries in Europe, most notably Germany and Spain, certain countries in Asia, including China, Japan and South Korea, as well as Australia and the United States have adopted renewable energy policies. Examples of government-sponsored financial incentives include capital cost rebates, feed-in tariffs, tax credits, net metering and other incentives to end-users, distributors, system integrators and manufacturers of solar power products to promote the use of solar power in both on-grid and off-grid applications and reduce dependency on other forms of energy. Nonetheless, the lack of implementation details for recent incentive schemes released by PRC government

 

15


Table of Contents

authorities may cause demand for PV products, including our products, not to grow as rapidly as we expect, if at all. In addition, political changes in a particular country could result in significant reductions or eliminations of subsidies or economic incentives, and the effects of the recent global financial crisis may affect the fiscal ability of governments to offer certain types of incentives, such as tax credits. A significant reduction in the scope or discontinuation of government incentive programs, especially those in China and our target overseas markets, could cause demand for our products and our revenues to decline, and have a material adverse effect on our business, financial condition, results of operations and prospects. Governments may decide to reduce or eliminate these economic incentives for political, financial or other reasons. Reductions in, or eliminations of government subsidies and economic incentives before the solar power industry reaches a sufficient scale to be cost-effective in a non-subsidized marketplace could reduce demand for our products and adversely affect our business prospects and results of operations. For example, in February 2010, the Spanish government announced that it would significantly reduce the feed-in tariffs for PV installations, which may significantly reduce incentives for solar power industry. In 2009, the German government reduced solar feed-in tariffs by 9%. In March 2010, the German government announced the reduction of feed-in tariffs for rooftop installations ground mounted installations on commercial land and ground mounted installations on converted land by 16%, 15% and 11%, respectively. In addition, PV installations on agricultural land will be ineligible for subsidies. These adjustments, which are to take effect on July 1, 2010, may result in a significant fall in the price of and demand for PV products. A significant reduction in the scope or discontinuation of government incentive programs, especially those in the target markets of our major customers, could cause demand for our products and our revenue to decline and have a material adverse effect on our business, financial condition, results of operations and prospects.

Our limited operating history makes it difficult to evaluate our results of operations and prospects.

We have only been in existence since June 2006 and have limited operating history with respect to each of our principal products. We commenced processing recoverable silicon materials in June 2006, manufacturing monocrystalline ingots and wafers in August 2007 and March 2008, respectively, and manufacturing multicrystalline ingots and wafers in June and July 2008, respectively. We commenced producing solar cells in July 2009 following our acquisition of Zhejiang Jinko, which has manufactured solar cells since June 2007. In addition, we commenced producing solar modules in August 2009. We made our first commercial shipments of monocrystalline ingots and wafers in August 2007 and March 2008, respectively, and our first commercial shipments of multicrystalline wafers and solar cells in July 2008 and 2009, respectively. We made our first commercial shipment of solar modules in August 2009.

Our future success will require us to scale up our production capacity beyond our existing capacity and further expand our customer base. Our business model and ability to achieve satisfactory manufacturing yields at higher volumes are unproven. To address these risks, we must, among other things, continue to (i) respond to competitive pressures and volatile market developments, (ii) attract, retain and motivate qualified personnel, (iii) implement and successfully execute our further vertical integration and expansion plans and (iv) improve our technologies. We cannot assure you that we will be successful in addressing such risks. Although we have experienced revenue growth in periods prior to the global recession, we cannot assure you that our revenues will increase at previous rates or at all, or that we will be able to operate profitably in future periods. Our limited operating history makes the prediction of future results of operations difficult, and therefore, past revenue growth experienced by us should not be taken as indicative of the rate of revenue growth, if any, that can be expected in the future. We believe that period to period comparisons of our operating results are not meaningful and that the results for any period should not be relied upon as an indication of future performance. You should consider our business and prospects in light of the risks, uncertainties, expenses and challenges that we will face as an early-stage company seeking to manufacture and sell new products in a volatile and challenging market.

 

16


Table of Contents

Notwithstanding our continuing efforts to further diversify our customer base, we derive, and expect to continue to derive, a significant portion of our revenues from a limited number of customers. As a result, the loss of, or a significant reduction in orders from, any of these customers would significantly reduce our revenues and harm our results of operations.

We expect that our results of operations will, for the foreseeable future, continue to depend on the sale of our products to a relatively small number of customers. For the years ended December 31, 2007 and 2008, sales to customers that individually exceeded 10% of our revenues accounted for approximately 53.8% and 47.1%, respectively, of our revenues, while for the year ended December 31, 2009, no customer generated sales that individually exceeded 10% of our revenues. Our relationships with our key customers were developed over a short period of time and are generally in their early stages. In particular, some of our key customers are either our silicon wafer customers or recovered silicon materials customers. We plan to use substantially all of our output of recovered silicon materials for our own silicon wafer production and use an increasing amount of our silicon wafers in our own solar cell and solar module production as we expand our solar cell and solar module production capacity. As a result, our silicon wafers and recovered silicon materials available for sale to such key customers may decrease over time or we may eventually cease selling our silicon wafers and recovered silicon materials to such key customers. We cannot assure you that these customers will continue to generate significant revenues for us or that we will be able to maintain these customer relationships. In addition, our business is affected by competition in the market for products that many of our major customers sell, and any decline in the businesses of our customers could reduce the purchase of our products by these customers. The loss of sales to any of these customers could also have a material adverse effect on our business, prospects and results of operations.

In addition, although as of the date of this prospectus, we had long-term sales contracts with four customers outstanding for the sale of an aggregate of approximately 266 MW of silicon wafers from 2010 to 2013, we may allow our customers flexibility in relation to the volume, timing and pricing of their orders under these contracts on a case-by-case basis. Therefore, the volumes of silicon wafers actually purchased by customers under these contracts in any given period and the timing and amount of revenues we recognize in such period may not correspond to the terms of these contracts. As a result, the revenues we recognize from sales under these contracts from period to period may vary, and such variance could have a material adverse effect on our results of operations.

Our failure to successfully execute our business expansion plans would have a material adverse effect on the growth of our sales and earnings.

Our future success depends, to a large extent, on our ability to increase vertical integration and expand our production capacity. We plan to increase our annual silicon wafer and solar module production capacity to approximately 500 MW each and annual solar cell production capacity to approximately 400 MW by the end of 2010. If we are unable to do so, we will not be able to achieve our goal of becoming a leading vertically integrated solar product supplier, attain the desired level of economies of scale in our operations or cut the marginal production cost to the level necessary to effectively maintain our pricing and other competitive advantages. This expansion has required and will continue to require substantial capital expenditures, significant engineering efforts, timely delivery of manufacturing equipment and dedicated management attention, and is subject to significant risks and uncertainties, including:

 

   

in order to finance our production capacity expansion, we may need to continue to contribute significant additional capital to our operating subsidiaries through bank borrowings or the issuance of our equity or debt securities, which may not be available on reasonable terms or at all, and which could be dilutive to our existing shareholders. Such capital contributions would also require PRC regulatory approvals in order for the proceeds from such issuances to be remitted to our operating subsidiaries, which approvals may not be granted in a timely manner or at all;

 

17


Table of Contents
   

we will be required to obtain government approvals, permits or documents of similar nature with respect to any acquisitions or new expansion projects, and we cannot assure you that such approvals, permits or documents will be obtained in a timely manner or at all;

 

   

we may experience cost overruns, construction delays, equipment problems, including delays in manufacturing equipment deliveries or deliveries of equipment that does not meet our specifications, and other operating difficulties;

 

   

we are using new equipment and technology for our solar cell and solar module production and to lower our unit capital and operating costs, but we cannot assure you that such new equipment and technology will perform as we anticipate; and

 

   

we may not have sufficient management resources to properly oversee capacity expansion as currently planned.

Any of these or similar difficulties could significantly delay or otherwise constrain our ability to undertake our capacity expansion as currently planned, which in turn would limit our ability to increase sales, reduce marginal manufacturing costs or otherwise improve our prospects and profitability.

In addition, we may have limited access to financing to fund working capital requirements, or may have to adjust the terms of our contracts with our suppliers or customers to accommodate their requests, or our suppliers and customers may be unable to perform their obligations under our existing contracts with them. Furthermore, we may be unable to secure new sales contracts, raw materials and equipment required for our production. The occurrence of any of these events would affect our ability to achieve economies of scale and higher utilization rates, which may in turn hinder our ability to increase vertical integration and expand our production capacity as planned.

As polysilicon supply increases, the corresponding increase in the global supply of the downstream solar power products including our products may cause substantial downward pressure on the prices of our products and reduce our revenues and earnings.

Polysilicon is an essential raw material used in the production of solar cells and modules. Prior to the second half of 2008, there was an industry-wide shortage of polysilicon, primarily as a result of the growing demand for solar power products. According to Solarbuzz, the average long-term supply contract price of polysilicon increased from approximately US$60-US$65 per kilogram delivered in 2007 to US$60-US$75 per kilogram in 2008. In addition, according to Solarbuzz, spot prices for solar grade polysilicon were in the range of US$230-US$375 per kilogram for most of the first half of 2008 and rose to a peak of US$450-US$475 per kilogram by mid-2008. Increases in the price of polysilicon have in the past increased our production costs, and any significant price increase in the future may adversely impact our business and results of operations. Due to the historical scarcity of polysilicon, supply chain management and financial strength were the key barriers to entry. In late 2008 and 2009, however, newly available polysilicon capacity has resulted in an increased supply of polysilicon, which created a downward pressure on the price of polysilicon. According to Solarbuzz, the average initial price range of long-term polysilicon supply contracts decreased to US$50-US$60 in the fourth quarter of 2009, and spot prices for solar grade polysilicon decreased rapidly to US$150-US$200 per kilogram by the beginning of 2009, and further declined to US$55-US$60 per kilogram by the end of 2009. We cannot assure you that the price of polysilicon will continue to decline or remain at its current levels, especially if the global solar power market regains its growth momentum. As the shortage of polysilicon eases, industry barriers to entry become less significant and the production of downstream solar power products including our products may increase globally. A decrease in polysilicon prices and an increase in the production of downstream solar power products may result in substantial downward pressure on the prices of those products, including our products. Such price reductions could have a negative impact on our revenues and earnings, and materially and adversely affect our business and results of operations.

 

18


Table of Contents

We may not be able to obtain sufficient silicon raw materials in a timely manner, which could have a material adverse effect on our results of operations and financial condition.

Up to mid-2008, an industry-wide shortage of virgin polysilicon, the basic raw material for all crystalline silicon solar power products and semiconductor devices, coupled with rapidly growing demand from the solar power industry, caused rapid escalation of virgin polysilicon prices and an industry-wide silicon shortage. However, in the second half of 2008 and first half of 2009, industry demand for solar power products was seriously affected by the global recession and credit market contraction. At the same time, global silicon feedstock manufacturing capacity experienced a significant expansion in 2008, which further reduced the market prices of virgin polysilicon and downstream solar power products, including our products. Nevertheless, we may experience interruption to our supply of silicon raw materials or late delivery in the future for the following reasons, among others:

 

   

the terms of our silicon material supply contracts with, or purchase orders to, our suppliers may be altered or cancelled by the suppliers with limited or no penalty to them, in which case we may not be able to recover damages fully or at all;

 

   

as we only began our business operations in June 2006, we generally do not have a long history with our virgin polysilicon suppliers and there can be no assurance that they will be able to meet our production needs consistently or on a timely basis;

 

   

compared to us, many of our competitors who also purchase virgin polysilicon from our suppliers have had longer and stronger relationships with and have greater buying power and bargaining leverage over some of our key suppliers; and

 

   

our supply of silicon raw materials is subject to the business risk of our suppliers, one or more of which may go out of business for any one of a number of reasons beyond our control in the current economic environment. See “— Hoku may not be able to complete its plant construction in a timely manner or may cease to continue as a going concern, which may have a material adverse effect on our results of operations and financial condition.”

If we experience interruption to our supply of silicon raw materials or fail to obtain delivery of silicon raw materials in amounts and according to time schedules that we expect, we may be forced to reduce production, which will adversely affect our revenues. In addition, our failure to obtain the required amounts of silicon raw materials in a timely manner and on commercially reasonable terms will substantially limit our ability to meet our contractual obligations to deliver products to our customers. Any failure by us to meet such obligations could have a material adverse effect on our reputation, ability to retain customers, market share, business and results of operations and may subject us to claims from our customers and other disputes. Furthermore, our failure to obtain sufficient silicon raw materials would result in under-utilization of our production facilities and an increase in our marginal production costs. Any of the above events could have a material adverse effect on our growth, profitability and results of operations.

Volatility in the prices of silicon raw materials makes our procurement planning challenging and could have a material adverse effect on our results of operations and financial condition.

We procure silicon raw materials through a combination of long-term supply contracts and spot market purchases. Currently, we have two long-term virgin polysilicon supply contracts with Zhongcai Technological Co., Ltd., or Zhongcai Technological, and Hoku Materials, Inc., together with its parent company, Hoku Corporation (formerly known as Hoku Scientific, Inc.), or Hoku, under which we have agreed to procure an aggregate of 5,350 metric tons of virgin polysilicon from 2009 to 2019. The annual prices under our long-term supply contract with Hoku are fixed with declining annual prices over the contract’s nine-year term, and the contract is subject to a prepayment arrangement. The average of the contract prices under the supply contract with Hoku over the term of the contract is above the April 2010 spot market index price as reflected in the Photon Consulting Silicon Price Index, or PCSPI. If the price of virgin polysilicon continues to decrease, this

 

19


Table of Contents

fixed-price, prepaid arrangement may cause our cost of silicon raw materials to be greater than that of our competitors who source their supply of silicon raw materials based on floating-price arrangements or spot market purchases unless we are able to renegotiate or otherwise adjust the purchase prices or volumes. Due to the volatility in the prices of virgin polysilicon, we cannot assure you that the prices under our long-term supply contract with Hoku will be below the spot market price. To the extent we may not be able to fully pass increased costs and expenses on to our customers, our profit margins, results of operations and financial condition may be materially and adversely affected.

In addition, we expect that the prices of virgin polysilicon feedstock may become increasingly volatile, making our procurement planning challenging. For example, if we refrain from entering into more fixed-price, long-term supply contracts, we may miss opportunities to secure long-term supplies of virgin polysilicon at favorable prices if the price of virgin polysilicon increases significantly in the future. On the other hand, if we enter into more fixed-price, long-term supply contracts, we may not be able to renegotiate or otherwise adjust the purchase prices under such long-term supply contracts if the price declines. In each case, our business, financial condition and results of operations may be materially and adversely affected.

We have grown our business through acquisition and may continue to undertake acquisitions, investments, joint ventures or other strategic alliances, and such undertakings may be unsuccessful.

As part of our strategy, our growth is also driven by acquisition. For example, we expanded our product lines into solar cells through our acquisition of Zhejiang Jinko in June 2009, and we may in the future continue to grow our operations through acquisitions, participation in joint ventures or other strategic alliances with suppliers or other companies in China and overseas along the solar power industry value chain. Such acquisitions, participation in joint ventures and strategic alliances may expose us to new operational, regulatory, market and geographical risks as well as risks associated with additional capital requirements and diversion of management resources.

In particular, our acquisition of Zhejiang Jinko and future acquisitions may expose us to various risks:

 

   

There may be unforeseen risks relating to the target’s business and operations or liabilities of the target that were not discovered by us through our legal and business due diligence prior to such acquisition. Such undetected risks and liabilities could have a material adverse effect on our business and results of operations in the future.

 

   

There is no assurance that we will be able to maintain customer relationships with previous customers of the target, or develop new customer relationships in the future. Loss of our existing customers or failure to establish relationships with new customers could have a material adverse effect on our business and results of operations.

 

   

Acquisitions will generally divert a significant portion of our management and financial resources from our existing business and the integration of the target’s operations with our existing operations has required, and will continue to require, significant management and financial resources, potentially straining our ability to finance and manage our existing operations.

 

   

There is no assurance that the expected synergies from the acquisition of Zhejiang Jinko or any other target will actually materialize. If we are not successful in the integration of Zhejiang Jinko or any other target’s operations, we may not be able to generate sufficient revenue from the operations of Zhejiang Jinko, or any such other target to recover costs and expenses of the acquisition.

The materialization of any of these risks could have a material adverse effect on our business, financial condition and results of operations.

 

20


Table of Contents

If we are unable to remedy the material weaknesses and the significant deficiency in our internal control over financial reporting, we may be unable to timely and accurately record, process and report financial data or comply with disclosure and other reporting obligations.

Upon completion of this offering, we will become a public company in the United States and will be subject to reporting obligations under the U.S. securities laws. Section 404 of the Sarbanes-Oxley Act of 2002, or SOX 404, will require that we include a management report that assesses the effectiveness of our internal control over financial reporting in our annual report on Form 20-F beginning with our annual report for the fiscal year ending December 31, 2011. In addition, our independent registered public accounting firm will be required to attest to and report on the effectiveness of our internal control over financial reporting. Our management may conclude that our internal control over financial reporting is not effective. Moreover, even if our management concludes that our internal control over financial reporting is effective, our independent registered public accounting firm may still issue a report that is qualified if it is not satisfied with our internal controls or the level at which our controls are documented, designed, operated or reviewed. Our reporting obligations as a public company will place a significant strain on our management, operational and financial resources and systems for the foreseeable future.

Prior to this offering, we have been a private company with a short operating history and have limited accounting personnel and other resources with which to address our internal control over financial reporting. In the course of the preparation and external audit of our consolidated financial statements for the years ended December 31, 2007, 2008 and 2009, we and our independent registered public accounting firm identified a number of control deficiencies in our internal control over financial reporting, including two material weaknesses and a significant deficiency, as defined in the standards established by the U.S. Public Company Accounting Oversight Board.

The material weaknesses identified were: (1) the lack of resources with appropriate accounting knowledge and experience to prepare and review financial statements and related disclosures in accordance with U.S. GAAP, which was evidenced by (i) the lack of sufficient resources with adequate U.S. GAAP knowledge and experience to identify, evaluate and conclude on certain accounting matters independently, and (ii) the lack of effective controls designed and in place to ensure the completeness and accuracy of the consolidated financial statements and disclosures in accordance with U.S. GAAP, including inappropriate presentation of statement of cash flows for the year ended December 31, 2009 and (2) inadequate review procedures, including appropriate levels of review in the design of period end reporting process that are consistently applied across our entities, to identify inappropriate accounting treatment of transactions, which was evidenced by audit adjustments for corrections of (i) revenue and inventory balance in relation to deliveries to a customer pending the customer’s formal acceptance as of December 31, 2008, (ii) preferred share accretion and earnings per share for the year ended December 31, 2008 and (iii) deferred taxation accounting for the year ended December 31, 2009 and inappropriate presentation of intangible assets in the consolidated balance sheet as of December 31, 2009.

The significant deficiency was the lack of formally documented corporate accounting policies in relation to the preparation of financial statements in accordance with U.S. GAAP.

Material weaknesses and significant deficiencies in our internal control over financial reporting could result in a material misstatement of our financial statements that will not be prevented or detected. Following the identification of these material weaknesses and control deficiencies, we have begun taking and/or plan to take actions and measures to significantly improve our internal control over financial reporting in order to obtain reasonable assurance regarding the reliability of our financial statements. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Internal Control Over Financial Reporting.” However, the implementation of these actions and measures may not be sufficient to address the material weaknesses and significant deficiency in our internal control over financial reporting to provide reasonable

 

21


Table of Contents

assurance that our internal control over financial reporting is effective, and we cannot yet conclude that such control deficiencies have been fully remedied. In addition, we cannot assure you if or when we will be able to remedy these control deficiencies or that our independent registered public accounting firm will agree with our assessment. Our failure to remedy these control deficiencies, identify and address any other material weaknesses or significant deficiencies, and implement new or improved controls successfully in a timely manner could result in inaccuracies in our financial statements and could impair our ability to comply with applicable financial reporting requirements and related regulatory filings on a timely basis. As a result, our business, financial condition, results of operations and prospects, as well as the trading price of our ADSs, may be materially and adversely affected.

We plan to continue to address and remedy these control deficiencies in time to meet the deadline for compliance with the requirements of SOX 404. Effective internal control over financial reporting is necessary for us to produce reliable financial reports and are important to help prevent fraud. Our failure to timely achieve and maintain the adequacy of our internal control could result in a loss of investor confidence in the reliability of our reporting processes, which could negatively impact the market price of our ADSs. Moreover, we anticipate that we will incur considerable costs and devote significant management time and other resources to comply with SOX 404 and other requirements of the Sarbanes-Oxley Act.

We may not be successful in expanding our product lines to include new products, which could limit our growth prospects.

In line with our strategy to become a leading vertically integrated solar product supplier, we commenced producing solar cells and solar modules in July and August 2009, respectively. We plan to increase our annual silicon wafer and solar module production capacity to approximately 500 MW each and annual solar cell production capacity to approximately 400 MW by the end of 2010. However, we had no prior experience in the manufacturing of solar cells or solar modules prior to our acquisition of Zhejiang Jinko in June 2009. Zhejiang Jinko had only approximately two years of experience in the manufacturing of solar cells before it was acquired by us and had no experience in the mass-production of solar modules. Solar cell and solar module production involves processes and technologies that are significantly different from the processing of recovered silicon materials and the production of silicon ingots and wafers. We will also need to establish relationships with customers and suppliers for our solar cells and solar modules which will be different from existing customers and suppliers for our silicon wafers. As such, we face various risks relating to the commencement of these new business operations, including our potential failures to:

 

   

procure solar cell and solar module production equipment and supplies of consumables and other materials for the production of solar cells and solar modules at reasonable costs and on a timely basis;

 

   

attract, train, motivate and retain skilled employees, including technicians and managers at different levels, for our solar cell and solar module production;

 

   

produce solar cells and solar modules cost-effectively and maintain adequate control of our expenses in relation to the production of solar cells and solar modules;

 

   

achieve acceptable quality of our solar cells and solar modules;

 

   

develop and retain customers for our solar cells and solar modules and increase the market awareness of our solar cells and solar modules;

 

   

keep up with evolving industry standards and market developments and respond to competitive market conditions; or

 

   

protect our proprietary technologies relating to the production of solar cells and solar modules.

In addition, we may continue to develop and produce new products, which may expose us to similar risks above. If we are unsuccessful in addressing any of these risks, our business, financial position and results of operations may be materially and adversely affected.

 

22


Table of Contents

We manufacture our products in two locations in China, which exposes us to various risks relating to long-distance transportation of our silicon wafers and solar cells in the manufacturing process.

Our manufacturing facilities for the production of silicon ingots, wafers and solar modules are, and will continue to be, located in Shangrao, Jiangxi Province while our manufacturing facilities for the production of solar cells are located in Haining, Zhejiang Province. We expect to use an increasingly large portion of our silicon wafer output for our own solar cell production, and as a result, we transport a substantial volume of our silicon wafers from Shangrao to Haining to be processed into solar cells. Our principal manufacturing base for our solar modules is located in Shangrao, and as a result, we need to transport a substantial volume of our solar cells from Haining to Shangrao to be processed into solar modules. The geographical separation of our manufacturing facilities necessitates constant long-distance transportation of substantial volumes of our silicon wafers and solar cells between Shangrao and Haining. The distance between Shangrao and Haining is approximately 410 kilometers and the two cities are connected by roads and railway. The constant long-distance transportation of a large volume of our silicon wafers and solar cells may expose us to various risks, including (i) increase in transportation costs, (ii) loss of our silicon wafers and/or solar cells as a result of any accidents that may occur in the transportation process; (iii) delays in the transportation of our silicon wafers or solar cells as a result of any severe weather conditions, natural disasters or other conditions adversely affecting road traffic between Haining and Shangrao; and (iv) disruptions to our production of solar cells and solar modules as a result of delays in the transportation of our silicon wafers and solar cells. Any of these risks could have a material adverse effect on our business and results of operations.

We may not be able to manage our expansion of operations effectively.

In anticipation of the growth in demand for our products, we plan to increase vertical integration and expand our business operations significantly. Our ability to meet existing contractual commitments to our customers depends on the successful and timely implementation of our expansion plan. If we are unable to fulfill our commitments to customers or customer orders on a timely basis or at all, we may lose our customers and our reputation may be damaged. Moreover, our contracts with our customers sometimes provide for specified monetary damages or penalties, which may be significant, for non-delivery or failure to meet delivery schedules or product specifications and allow a termination of the contract by our customer. If any of our customers invoke these clauses against us, we may lose future sales and need to defend against the relevant claims, which could be time consuming and expensive. We may be found liable under these clauses and be required to pay damages.

The success of our business expansion and operational growth depends on the improvement of our operational and financial systems, enhancement of our internal procedures and controls, and effective recruitment of, training and retention of technicians and skilled employees. If we fail to improve our operational and financial systems, enhance our internal procedures and controls and risk monitoring and management system and recruit, train and retain adequate management resources, we may not be able to take advantage of growth opportunities or identify unfavorable business trends, administrative oversights or other risks that could materially and adversely affect our business, prospects, financial condition and results of operations. Furthermore, our management will be required to maintain and expand our relationships with our customers, suppliers and other third parties. We cannot assure you that our current and planned operations, personnel, systems, internal procedures and controls will be adequate to support our future growth. If we are unable to manage our growth effectively, we may not be able to take advantage of market opportunities, execute our business strategies or respond to competitive pressures.

Our dependence on a limited number of suppliers for a substantial majority of silicon materials could prevent us from delivering our products in a timely manner to our customers in the required quantities, which could result in order cancellations, decreased revenue and loss of market share.

In 2008 and 2009, our five largest suppliers, including the VIEs, supplied in the aggregate approximately 81.2% and 54.1%, respectively, of our total silicon material purchases by value. If we fail to develop or maintain our relationships with these or our other suppliers, we may be unable to manufacture our products, our products

 

23


Table of Contents

may only be available at a higher cost or after a long delay, or we could be prevented from delivering our products to our customers in the required quantities, at competitive prices and on acceptable terms of delivery. Problems of this kind could cause us to experience order cancellations, decreased revenue and loss of market share. In general, the failure of a supplier to supply silicon materials that meet our quality, quantity and cost requirements in a timely manner due to lack of supplies or other reasons could impair our ability to manufacture our products or could increase our costs, particularly if we are unable to obtain these materials and components from alternative sources in a timely manner or on commercially reasonable terms. Some of our suppliers have a limited operating history and limited financial resources, and the contracts we entered into with these suppliers do not clearly provide for remedies to us in the event any of these suppliers is not able to, or otherwise does not, deliver, in a timely manner or at all, any materials it is contractually obligated to deliver. Any disruption in the supply of silicon materials to us may adversely affect our business, financial condition and results of operations.

Prepayment arrangements to suppliers for the procurement of silicon raw materials expose us to the credit risks of such suppliers and may also significantly increase our costs and expenses, which could in turn have a material adverse effect on our financial condition, results of operations and liquidity.

Our supply contracts generally include prepayment obligations for the procurement of silicon raw materials. As of December 31, 2009, we had approximately RMB324.2 million (US$47.5 million) of advances to suppliers. We do not receive collateral to secure such payments for some of these contracts. Our prepayments, secured or unsecured, would expose us to the credit risks of our suppliers in the event that our suppliers become insolvent or bankrupt and would undermine our chances of obtaining the return of such payments. Moreover, we may not be able to recover such prepayments and would suffer losses if any of our suppliers fails to fulfill its contractual delivery obligations to us for any other reason. Accordingly, a default by our suppliers to whom we have made substantial prepayment may have a material adverse effect on our financial condition, results of operations and liquidity. See “— Hoku may not be able to complete its plant construction in a timely manner or may cease to continue as a going concern, which may have a material adverse effect on our results of operations and financial condition.” In addition, if the market price of silicon raw materials decreases, we may not be able to adjust any historical payment insofar as it relates to a future delivery at a fixed price. To the extent that we are unable to pass these increased costs and expenses to our customers, our business, financial condition and results of operations may be materially and adversely affected.

Hoku may not be able to complete its plant construction in a timely manner or may cease to continue as a going concern, which may have a material adverse effect on our results of operations and financial condition.

We have entered into a long-term supply contract with Hoku, a virgin polysilicon supplier, pursuant to which we had made a total prepayment of US$20.0 million to Hoku as of July 8, 2009. Hoku is currently in the process of undertaking a construction project for producing the virgin polysilicon we have contracted for. While our prepayment is secured by a lien on Hoku’s assets according to the terms of our supply contract with Hoku, such lien is deeply subordinated and shared with all other customers and other senior lenders of Hoku. On December 23, 2009, Hoku publicly announced that on December 22, 2009, it issued shares and warrants representing a majority of its shares to Tianwei New Energy Holdings Co., Ltd., or Tianwei, a PRC company engaged in the manufacturing of silicon wafers, solar cells and modules. In addition, pursuant to the arrangement between Hoku and Tianwei, Tianwei has the right to appoint a majority of the directors of Hoku Scientific, thus giving Tianwei control of Hoku. In exchange, Tianwei cancelled US$50 million of indebtedness that Hoku would be obligated to repay to Tianwei under certain polysilicon supply agreements and Tianwei agreed to provide Hoku with a loan of US$50 million through China Construction Bank in two tranches within 60 days after December 22, 2009. As disclosed in Hoku’s Form 10-Q filed on February 5, 2010, Hoku would have sufficient financing to pay its current liabilities and complete construction of its virgin polysilicon production plant to the point where it could commence initial shipment of virgin polysilicon to its customers if Hoku receives the US$50 million loan from Tianwei and US$55 million of additional prepayments from its existing customers. As of

 

24


Table of Contents

March 8, 2010, Hoku had received the US$50 million loan from Tianwei. If Hoku does not receive anticipated prepayments under its polysilicon supply agreements, it may need to curtail the construction of its virgin polysilicon plant. In addition, Hoku will still need to seek additional financing to complete its virgin polysilicon construction project. If Hoku is unable to obtain the required financing, it could raise substantial doubt about Hoku’s ability to continue as a going concern. The inability to continue as a going concern could result in an orderly wind-down of Hoku or other potential restructuring of Hoku. Tianwei has committed to assist Hoku in obtaining additional financing that may be required by Hoku to construct and operate its virgin polysilicon manufacturing facility. However, if Hoku is not successful in obtaining financing required to complete construction of the virgin polysilicon manufacturing facility, causing it to fail to fulfill its contractual delivery obligations to us, or if Hoku ceases to continue as a going concern, we may have difficulty recovering all or any of the deposits we have paid to Hoku. In any such case, we may be obliged to record provisions for impairment loss for all or part of our prepayments to Hoku, which could have a material adverse effect on our financial condition. As of December 31, 2009, we did not record any provisions in relation to the prepayment to Hoku as the potential impairment loss was not probable or estimable. Moreover, because Tianwei is our competitor, Hoku could decide to discontinue supplying, or reduce its supply of, virgin polysilicon to us after the termination of the current contract. If Hoku fails to fulfill its contractual delivery obligations to us on time or at all, we may not be able to procure replacement virgin polysilicon from other suppliers on a timely basis and on commercially reasonable terms and our production may be interrupted, which could have a material adverse effect on our results of operations and financial condition.

Increases in electricity costs or shortage or disruption of electricity supply may adversely affect our operations.

We consume a significant amount of electricity in our operations. Electricity prices in China have increased in the past few years. Our per kilowatt-hour, or kWh, electricity price increased from RMB0.525 in 2007 to RMB0.584 (US$0.086) in 2009. Moreover, with the rapid development of the PRC economy, demand for electricity has continued to increase. There have been shortages or disruptions in electricity supply in various regions across China, especially during peak seasons, such as the summer, or when there are severe weather conditions. For example, we experienced a production disruption at our facilities in the Shangrao Municipality due to power blackouts resulting from severe winter weather conditions in early 2008. Any disruption in the power supply to our furnaces could result in the loss of an entire production run. To prevent further disruption in our power supply, the Shangrao Economic Development Zone Management Committee and Shangrao County Power Supply Co., Ltd. have completed the construction of the first stage of an electric power transformation and distribution substation at our manufacturing site. The electric power transformation and distribution substation currently has an annual capacity of 438 million kWh and is expected to be sufficient to support our current operations and our expansion plans through 2010. However, we cannot assure you that there will not be further disruptions or shortages in our electricity supply or that there will be sufficient electricity available to us to meet our future requirements. Increases in electricity costs, shortages or disruptions in electricity supply may significantly disrupt our normal operations, cause us to incur additional costs and adversely affect our profitability.

Decreases in the price of silicon raw materials and products may result in additional provisions for inventory losses.

We typically plan our production and inventory levels based on our forecasts of customer demand, which may be unpredictable and can fluctuate materially. The current global economic downturn and market instability make it increasingly difficult for us to accurately forecast future product demand trends. Due to the decrease in the price of silicon materials and products, we recorded inventory provision of RMB5.2 million and RMB4.8 million (US$0.7 million) as of December 31, 2008 and 2009 respectively. If the prices of silicon materials and products decrease again, the carrying value of our existing inventory may exceed its market price in future periods, thus requiring us to make additional provisions for inventory valuation, which may have a material adverse effect on our financial position and results of operations.

 

25


Table of Contents

We face intense competition in solar power product markets. If we fail to adapt to changing market conditions and to compete successfully with existing or new competitors, our business prospects and results of operations would be materially and adversely affected.

The markets for monocrystalline and multicrystalline silicon wafers, solar cells and solar modules are intensely competitive. As we build up our solar cell and solar module production capacity and increase the output of these two products, we compete with manufacturers of solar cells and solar modules such as BP Solar Inc., or BP Solar, Sharp Corporation, SunPower Corporation, Suntech Power Holdings Co., Ltd., or Suntech, Trina Solar Ltd., or Trina, and Yingli Green Energy Holding Co., Ltd., or Yingli Green Energy, in a continuously evolving market. In the silicon wafer market, our competitors include international vendors such as MEMC Electronic Materials, Inc., or MEMC, Deutsche Solar AG, or Deutsche Solar, M. SETEK Co., Ltd., or M. SETEK, and PV Crystalox Solar plc, or PV Crystalox, as well as companies with operations in China such as ReneSola, LDK Solar, or LDK, Jiangsu Shunda Group, or Shunda, Jiangyin Hairun Science & Technology Co., Ltd., or Hairun, Shanghai Comtec Solar Technology Co., Ltd., or Comtec. Recently, some upstream polysilicon manufacturers as well as downstream manufacturers have also built out or expanded their silicon wafer or solar cell production operations. Some of these competitors are also our customers and suppliers.

Many of our current and potential competitors have a longer operating history, stronger brand recognition, more established relationships with customers, greater financial and other resources, a larger customer base, better access to raw materials and greater economies of scale than we do. Furthermore, many of our competitors are integrated players in the solar industry that engage in the production of virgin polysilicon and solar modules. Their business models may give them competitive advantages as these integrated players place less reliance on the upstream suppliers and/or downstream customers.

Moreover, due to the growth in demand for monocrystalline and multicrystalline wafers, solar cells and solar modules, we expect an increase in the number of competitors entering this market over the next few years. The key barriers to entry into our industry at present consist of availability of financing and availability of experienced technicians and executives familiar with the industry. If these barriers disappear or become more easily surmountable, new competitors may successfully enter into our industry, resulting in loss of our market share and increased price competition, which could adversely affect our operating and net margins.

We also compete with alternative solar technologies. Some companies have spent significant resources in the research and development of proprietary solar technologies that may eventually produce photovoltaic products at costs similar to, or lower than, those of monocrystalline or multicrystalline wafers without compromising product quality. For example, some companies are developing or currently producing photovoltaic products based on thin film photovoltaic materials, which require significantly less polysilicon to produce than monocrystalline or multicrystalline solar power products. These alternative photovoltaic products may cost less than those based on monocrystalline or multicrystalline technologies while achieving the same level of conversion efficiency, and therefore, may decrease the demand for monocrystalline and multicrystalline wafers, which may adversely affect our business prospects and results of operations.

In addition, the solar power market in general also competes with other sources of renewable energy and conventional power generation. If prices for conventional and other renewable energy sources decline, or if these sources enjoy greater policy support than solar power, the solar power market could suffer and our business and results of operations may be adversely affected.

If solar power technology is not suitable for widespread adoption, or sufficient demand for solar power products does not develop or takes longer to develop than we anticipate, our revenues may decline, and we may be unable to sustain our profitability.

The solar power market is at a relatively early stage of development, and the extent of acceptance of solar power products is uncertain. Market data on the solar power industry is not as readily available as those for other

 

26


Table of Contents

more established industries where trends can be assessed more reliably from data gathered over a longer period of time. Many factors may affect the viability of wide commercial adoption and application of solar power technology, including:

 

   

cost-effectiveness, performance and reliability of solar power products compared to conventional and other renewable energy sources and products;

 

   

availability of government subsidies and incentives to support the development of the solar power industry;

 

   

success of other alternative energy generation technologies, such as wind power, hydroelectric power and biomass;

 

   

fluctuations in economic and market conditions that affect the viability of conventional and other renewable energy sources, such as increases or decreases in the prices of oil and other fossil fuels;

 

   

capital expenditures by end users of solar power products, which tend to decrease when the economy slows down; and

 

   

deregulation of the electric power industry and broader energy industry.

If solar power technology proves unsuitable for wide commercial adoption and application or if demand for solar power products fails to develop sufficiently, we may not be able to grow our business or generate sufficient revenues to sustain our profitability.

Technological changes in the solar power industry could render our products uncompetitive or obsolete, which could reduce our market share and cause our revenue and net income to decline.

The solar power industry is characterized by evolving technologies and standards. These technological evolutions and developments place increasing demands on the improvement of our products, such as solar cells with higher conversion efficiency and larger and thinner silicon wafers and solar cells. Other companies may develop production technologies enabling them to produce silicon wafers that could yield higher conversion efficiencies at a lower cost than our products. Some of our competitors are developing alternative and competing solar technologies that may require significantly less silicon than solar cells and modules, or no silicon at all. Technologies developed or adopted by others may prove more advantageous than ours for commercialization of solar power products and may render our products obsolete. As a result, we may need to invest significant resources in research and development to maintain our market position, keep pace with technological advances in the solar power industry and effectively compete in the future. Our failure to further refine and enhance our products or to keep pace with evolving technologies and industry standards could cause our products to become uncompetitive or obsolete, which could in turn reduce our market share and cause our revenue and net income to decline.

Existing regulations and policies and changes to these regulations and policies may present technical, regulatory and economic barriers to the purchase and use of solar power products, which may significantly reduce demand for our products.

The market for electricity generation products is heavily influenced by government regulations and policies concerning the electric utility industry, as well as policies adopted by electric utilities companies. These regulations and policies often relate to electricity pricing and technical interconnection of customer-owned electricity generation. In a number of countries, these regulations and policies are being modified and may continue to be modified. Customer purchases of, or further investment in the research and development of, alternative energy sources, including solar power technology, could be deterred by these regulations and policies, which could result in a significant reduction in the demand for our products. For example, without a regulatory mandated exception for solar power systems, utility customers are often charged interconnection or standby fees for putting distributed power generation on the electric utility grid. These fees could increase the cost of solar

 

27


Table of Contents

power and make it less desirable, thereby decreasing the demand for our products, harming our business, prospects, results of operations and financial condition.

In addition, we anticipate that solar power products and their installation will be subject to oversight and regulation in accordance with national and local regulations relating to building codes, safety, environmental protection, utility interconnection, and metering and related matters. Any new government regulations or utility policies pertaining to solar power products may result in significant additional expenses to the users of solar power products and, as a result, could eventually cause a significant reduction in demand for our products.

We may be subject to significant vacant land fees or even forfeit our land use rights with respect to two pieces of land zoned for residential use.

In January and June 2008, Jiangxi Jinko obtained the land use rights for two parcels of land zoned for residential use in the Shangrao Economic Development Zone with site areas of approximately 102,507 square meters and 133,334 square meters, respectively. Jiangxi Jinko paid an aggregate amount of RMB157.7 million in relation to such land use rights, including land use right fees of RMB151.5 million and relevant taxes and fees of RMB6.2 million. Under the agreement between the local land and resource bureau and Jiangxi Jinko, Jiangxi Jinko is only permitted to develop residential buildings on these two parcels of land and are required to commence its construction and development work no later than August 31, 2008 and December 31, 2008, respectively. While we intend to construct employee dormitories on these two parcels in connection with our capacity expansion plans for our silicon wafer and solar module production, we have not started construction on these parcels of land yet and do not have any concrete plan for construction either.

Under the relevant PRC laws and regulations, unless the delay of the construction is caused by force majeure, government actions or any necessary pre-construction work, if Jiangxi Jinko fails to commence construction and development work on these two parcels of land within one year after the respective deadlines, it may be subject to a fine of 20% of the land use right fees, which is up to approximately RMB30.3 million. We may also be subject to liquidated damages for failure to commence construction promptly. If Jiangxi Jinko does not commence construction and development work within two years after the respective deadlines, it may forfeit its land use rights without compensation. Jiangxi Jinko obtained a confirmation letter dated August 16, 2009 issued by the local land and resource bureau, or the local land bureau, in which the local land bureau confirmed that the two parcels of land had not been delivered to Jiangxi Jinko because the pre-construction work had not been finished by the local land bureau, and therefore, Jiangxi Jinko would not be subject to any vacant land fees or liquidated damages due to its failure to commence construction before the above-mentioned deadlines. The letter further confirmed that Jiangxi Jinko’s ownership to the two parcels of land would not be affected.

Our dependence on a limited number of third-party suppliers for key manufacturing equipment could prevent us from the timely fulfillment of customer orders and successful execution of our expansion plan.

We rely on a limited number of equipment suppliers for all our principal manufacturing equipment and spare parts, including our ingot furnaces, squaring machines, wire saws, diffusion furnaces, firing furnaces and screen print machine. Our equipment suppliers include Miyamoto Trading Limited, or Miyamoto, GT Solar Incorporated, or GT Solar, Changzhou Huasheng Tianlong Mechanical Co., Ltd or Huasheng Tianlong, NPC Incorporated, or NPC. These suppliers have supplied most of our current principal equipment and spare parts, and we will also rely on them to provide a substantial portion of the principal manufacturing equipment and spare parts contemplated in our expansion plan. We have entered into contracts with these and other equipment manufacturers to purchase additional equipment from them for our planned expansion of annual silicon wafer and solar module production capacity to approximately 500 MW each and annual solar cell production capacity to approximately 400 MW by the end of 2010.

If we fail to develop or maintain our relationships with these and other equipment suppliers, or should any of our major equipment suppliers encounter difficulties in the manufacturing or shipment of its equipment or

 

28


Table of Contents

spare parts to us, including due to natural disasters or otherwise fail to supply equipment or spare parts according to our requirements, it will be difficult for us to find alternative providers for such equipment on a timely basis and on commercially reasonable terms. As a result, the implementation of our expansion plan may be interrupted and our production could be adversely affected.

We require a significant amount of cash to fund our operations and business expansion; if we cannot obtain additional capital on terms satisfactory to us when we need it, our growth prospects and future profitability may be materially and adversely affected.

We require a significant amount of cash to fund our operations, including payments to suppliers for our polysilicon feedstock. We will also need to raise fund for the expansion of our production capacity and other investing activities, as well as our research and development activities in order to remain competitive. We believe that our current cash, anticipated cash flow from operations and the proceeds from this offering will be sufficient to meet our anticipated cash needs for the next 12 months, including for working capital and capital expenditures. However, future acquisitions, expansions, market changes or other developments may cause us to require additional funds. Our ability to obtain external financing is subject to a number of uncertainties, including:

 

   

our future financial condition, results of operations and cash flows;

 

   

the state of global credit markets;

 

   

general market conditions for financing activities by companies in our industry; and

 

   

economic, political and other conditions in China and elsewhere.

If we are unable to obtain funding in a timely manner or on commercially acceptable terms, or at all, our growth prospects and future profitability may be materially and adversely affected.

We do not expect to require customers to make advance payments to us in the future and began selling our products on credit terms, which may increase our working capital requirements and expose us to the credit risk of our customers.

Historically, we required customers, including our long-term customers, to make prepayments equivalent to a certain percentage of the contract price before product delivery, a business practice that helped us to manage our accounts receivable, prepay our suppliers and reduce the amount of funds that we need to finance our working capital requirements. However, as the market becomes increasingly competitive, we do not expect to enter into further sales contracts that will require our customers to make prepayments.

Commencing in the fourth quarter of 2008, we also began selling our products to some customers on credit terms and allowed them to delay payments of the full purchase price for a certain period of time after delivery of our products. Eliminating advance payment arrangements and starting credit sales to our customers have increased, and may continue to increase our working capital requirement, which may negatively impact our short-term liquidity. Although we have been able to maintain adequate working capital primarily through cash generated from our operating activities, we may not be able to continue to do so in the future and may need to secure additional financing for our working capital requirements. If we fail to secure additional financing on a timely basis or on terms acceptable to us, our financial conditions, results of operations and liquidity may be adversely affected. In addition, we are exposed to the credit risk of our customers to which we have made credit sales in the event that any of such customers becomes insolvent or bankrupt or otherwise does not make payments to us on time.

We face risks associated with the marketing, distribution and sale of our products internationally, and if we are unable to effectively manage these risks, they could impair our ability to expand our business abroad.

We commenced sales in overseas markets in May 2008, when we exported a small portion of our products to Hong Kong. Since then we have increased our sales in overseas markets. In 2009, we generated 42.8% of our

 

29


Table of Contents

revenues from export sales. We plan to continue to increase sales outside of China and expand our customer base overseas. However, the marketing, distribution and sale of our products in overseas markets may expose us to a number of risks, including:

 

   

fluctuations in currency exchange rates;

 

   

increased costs associated with maintaining the ability to understand the local markets and follow their trends, as well as develop and maintain effective marketing and distributing presence in various countries;

 

   

providing customer service and support in these markets;

 

   

failure to develop appropriate risk management and internal control structures tailored to overseas operations;

 

   

difficulty and cost relating to compliance with the different commercial and legal requirements of the overseas markets in which we offer or plan to offer our products and services;

 

   

failure to obtain or maintain certifications for our products or services in these markets;

 

   

inability to obtain, maintain or enforce intellectual property rights;

 

   

unanticipated changes in prevailing economic conditions and regulatory requirements;

 

   

difficulty in employing and retaining sales personnel who are knowledgeable about, and can function effectively in, overseas markets; and

 

   

trade barriers such as export requirements, tariffs, taxes and other restrictions and expenses, which could increase the prices of our products and make us less competitive in some countries.

We may be subject to non-competition or other similar restrictions or arrangements relating to our business.

We may from time to time enter into non-competition, exclusivity or other restrictions or arrangements of a similar nature as part of our sales agreements with our customers. Such restrictions or arrangements may significantly hinder our ability to sell additional products, or enter into sales agreements with new or existing customers that plan to sell our products, in certain markets. As a result, such restrictions or arrangements may have a material adverse effect on our business, financial condition and results of operation.

Our failure to maintain sufficient collaterals under certain pledge contracts for our short-term bank loans may materially and adversely affect our financial condition and results of operations.

As of December 31, 2009, Jiangxi Jinko had short-term bank borrowings of RMB219.0 million (US$32.1 million) with Bank of China, Shangrao Branch, or Shangrao Bank of China and Agricultural Bank of China, Shangrao Branch. These borrowings were secured by certain of our inventory. The net book value of the inventory at the time of the pledge contracts amounted to approximately RMB539.9 million (US$79.1 million). Due to the decline in the prices of silicon raw materials, the net book value of our inventory has decreased. According to the pledge contracts, loan agreements and applicable laws, we may be requested by the pledgees to provide additional collaterals to bring the value of the collaterals to the level required by the pledgees. If we fail to provide additional collaterals, the pledgees will be entitled to require the immediately repayment by us of the outstanding bank loans, otherwise, the pledgees may auction or sell the inventory and negotiate with us to apply the proceeds from the auction or sale to the repayment of the underlying loan. Furthermore, we may be subject to liquidated damages pursuant to relevant pledge contracts. Although the pledgees have conducted regular site inspections on our inventory since the pledge contracts were executed, they have not requested us to provide additional collaterals or take other remedial actions. However, we cannot assure you the pledgees will not require us to provide additional collaterals in the future or take other remedial actions or otherwise enforce their rights under the pledge contracts and loan agreements. If any of the foregoing occurs, our financial condition and results of operations may be materially and adversely affected.

 

30


Table of Contents

We may be exposed to the credit and performance risks of a third party, which may materially and adversely affect our financial condition.

On June 13, 2009, we entered into a loan agreement, or the Heji Loan Agreement, with Jiangxi Heji Investment Co., Ltd., or Heji Investment, for loans with an aggregate principal amount of up to RMB100 million. We borrowed RMB50.0 million from Heji Investment under the Heji Loan Agreement. In September and October 2009, we and Heji Investment re-arranged our borrowings under the Heji Loan Agreement into entrusted loans with an aggregate principal amount of RMB50.0 million pursuant to the entrusted loan agreements with Agricultural Bank of China, or the Entrusted Loan Agreements. In connection with the Heji Loan Agreement, we entered into a guarantee agreement, or the Guarantee Agreement, with Jiangxi International Trust Co., Ltd., or JITCL, on May 31, 2009 to guarantee Heji Investment’s repayment obligations to JITCL under a loan agreement, or the JITCL Loan Agreement, pursuant to which JITCL extended a loan to Heji Investment in the principal amount of RMB50 million for a term of three years. None of the Heji Loan Agreement, the Entrusted Loan Agreements, the Guarantee Agreement and the JITCL Loan Agreement requires Heji Investment to apply the proceeds it will receive from our repayment of the entrusted loans to perform its repayment obligations under the JITCL Loan Agreement. If Heji Investment fails to perform its obligations under the JITCL Loan Agreement for any reason or otherwise defaults thereunder, we will become liable for Heji Investment’s obligations under the JITCL Loan Agreement. We cannot assure you that Heji Investment will apply the proceeds of our loan repayment under the Entrusted Loan Agreements to perform its obligations under the JITCL Loan Agreement or otherwise make full repayment thereunder upon maturity. We may not be released from our obligations under the Guarantee Agreement even if we repay in full the entrusted loans. In addition, we may not be released from our repayment obligations under the Entrusted Loan Agreements even if we are asked to fulfill our obligations as guarantor under the Guarantee Agreement. If any of the above occurs, we may be required to perform obligations under both the Entrusted Loan Agreements and the Guarantee Agreement, which would have a materially adverse effect on our financial condition.

Our substantial indebtedness could adversely affect our business, financial condition and results of operations.

We typically require a significant amount of cash to meet our capital requirements, including the expansion of our production capacity, as well as to fund our operations. As of December 31, 2009, we had approximately RMB576.1 million (US$84.4 million) in outstanding short-term borrowings (including the current portion of long-term bank borrowings) and RMB348.8 million (US$51.1 million) in outstanding long-term bank borrowings (excluding the current portion and deferred financing cost).

This level of debt could have significant consequences on our operations, including:

 

   

reducing the availability of our cash flow to fund working capital, capital expenditures, acquisitions and other general corporate purposes as a result of our debt service obligations, and limiting our ability to obtain additional financing;

 

   

limiting our flexibility in planning for, or reacting to, and increasing our vulnerability to, changes in our business, the industry in which we operate and the general economy; and

 

   

potentially increasing the cost of any additional financing.

Any of these factors and other consequences that may result from our substantial indebtedness could have an adverse effect on our business, financial condition and results of operations as well as our ability to meet our payment obligations under our debt.

Our ability to meet our payment obligations under our outstanding debt depends on our ability to generate significant cash flow in the future. This, to some extent, is subject to general economic, financial, competitive, legislative and regulatory factors as well as other factors that are beyond our control. We believe that available credit under existing bank credit facilities as well as cash on hand and expected operating cash flow, will be sufficient to meet our anticipated cash needs, including our cash needs for working capital and capital

 

31


Table of Contents

expenditure for the next 12 months. However, we cannot assure you that our business will generate adequate cash flow from operations to support our operations and service our debt obligations, or that future borrowings will be available to us under our existing or any future credit facilities or otherwise, in an amount sufficient to enable us to meet our payment obligations under our outstanding debt while continuing to fund our other liquidity needs. If we are not able to generate sufficient cash flow to service our debt obligations, we may need to refinance or restructure our debt, sell assets, reduce or delay capital investments, or seek to raise additional capital. If we are unable to implement one or more of these alternatives, we may not be able to meet our payment and other obligations under our outstanding debt, which may have a material adverse effect on our operations and financial condition.

Our research and development initiatives may fail to enhance manufacturing efficiency or quality of our products.

We are making efforts to improve our manufacturing processes and improve the conversion efficiency and quality of our products. We plan to focus our research and development efforts on improving each step of our production process, making us an industry leader in technological innovation. In addition, we undertake research and development to enhance the quality of our products. We cannot assure you that such efforts will improve the efficiency of manufacturing processes or yield products with expected quality. In addition, the failure to realize the intended benefits from our research and development initiatives could limit our ability to keep pace with rapid technological changes, which in turn would hurt our business and prospects.

Failure to achieve satisfactory production volumes of our products could result in a decline in sales.

The production of silicon wafers, solar cells, solar modules, silicon ingots and recovered silicon materials involves complex processes. Deviations in the manufacturing process can cause a substantial decrease in output and, in some cases, disrupt production significantly or result in no output. We have from time to time experienced lower-than-anticipated manufacturing output during the ramp-up of production lines. This often occurs during the introduction of new products, the installation of new equipment or the implementation of new process technologies. As we bring additional lines or facilities into production, we may operate at less than intended capacity during the ramp-up period. This would result in higher marginal production costs and lower than expected output, which could have a material adverse effect on our results of operations.

Our operating results may fluctuate from period to period in the future.

Our results may be affected by factors such as changes in costs of raw materials, delays in equipment delivery, suppliers’ failure to perform their delivery obligations and interruptions in electricity supply and other key production inputs. In particular, our results may be affected by the general economic conditions and the state of the credit markets both in China and elsewhere in the world, which may affect the demand for our products and availability of financing resources. The rapid expansion of virgin polysilicon manufacturing capacity and falling demand for solar power products including our products resulting from the global recession and credit market contraction caused the prices of solar power products including our products to decline in the fourth quarter of 2008 and first half of 2009. As a consequence, although we experienced revenue growth in periods prior to the global recession, our profit margins were adversely affected in the fourth quarter of 2008 and first half of 2009. In addition, because demand for solar power products tends to be weaker during the winter months partly due to adverse weather conditions in certain regions, which complicate the installation of solar power systems, our operating results may fluctuate from period to period based on the seasonality of industry demand for solar power products. Our sales in the first quarter of any year may also be affected by the occurrence of the Chinese New Year holiday during which domestic industrial activity is normally lower than that at other times. Further, in order to become a fully-integrated maker of solar power products, we have rapidly expanded our manufacturing capacities of silicon wafers, solar cells and solar modules over the past few years, and the respective manufacturing capacities of each product in the value chain have not been perfectly matched. To fully capture demand for various types of solar power products, at different times during 2009 we sold silicon wafers

 

32


Table of Contents

and solar cells as end-products to certain customers, and also purchased silicon wafers and solar cells as inputs for the manufacturing of solar cells and solar modules, respectively, and sold these solar cells and solar modules as end-products. As a result, compared to a fully-integrated maker of solar power products of comparable size with equal manufacturing capacities for silicon wafers, solar cells and solar modules, our sales and our total revenues were larger and our gross profit margin was lower as we were not able to capture the profit in the entire value chain. In future periods, our sales revenues and gross profit margin may vary as we better match our silicon wafer and solar cell capacity to our solar module capacity to become fully vertically integrated. In addition, from time to time we may apply for and receive government incentives in the form of subsidy income, and the amount of such subsidy varies from period to period, which may cause our net income and net margin to vary from period to period. In 2009, we received government subsidy totaling RMB8.6 million (US$1.3 million), which included subsidy for our expansion of production scale, technology upgrades and development of export markets. We cannot assure you that we will continue to receive a similar amount or any amount of government subsidy in future periods. As a result of the foregoing, you may not be able to rely on period to period comparisons of our operating results as an indication of our future performance.

Unsatisfactory performance of or defects in our products may cause us to incur additional expenses and warranty costs, damage our reputation and cause our sales to decline.

Our products may contain defects that are not detected until after they are shipped or inspected by our customers. Our silicon wafer sales contracts normally require our customers to conduct inspection before delivery. We may, from time to time, allow those of our silicon wafer customers with good credit to return our silicon wafers within a stipulated period, which normally ranges from seven to 45 working days after delivery, if they find our silicon wafers do not meet the required specifications. Our standard solar cell sales contract requires our customer to notify us within seven days of delivery if such customer finds our solar cells do not meet the specifications stipulated in the sales contract. If our customer notifies us of such defect within the specified time period and provides relevant proof, we will replace those defective solar cells with qualified ones after our confirmation of such defects. Our solar modules are typically sold with either a two-year or five-year warranty for all defects and a 10-year and 25-year warranty against declines of more than 10.0% and 20.0%, respectively, from the initial minimum power generation capacity at the time of delivery. If a solar module is defective during the relevant warranty period, we will either repair or replace the solar module. If we experience a significant increase in warranty claims, we may incur significant repair and replacement costs associated with such claims. In addition, product defects could cause significant damage to our market reputation and reduce our product sales and market share, and our failure to maintain the consistency and quality throughout our production process could result in substandard quality or performance of our products. If we deliver our products with defects, or if there is a perception that our products are of substandard quality, we may incur substantially increased costs associated with returns or replacements of our products, our credibility and market reputation could be harmed and our sales and market share may be adversely affected.

As the import of recoverable silicon materials is subject to approvals from relevant governmental authorities, if we have to import recoverable silicon materials in the future for our silicon ingot manufacturing and we cannot obtain such approvals in a timely manner or at all, our raw material supplies may be adversely affected.

Historically, a portion of our recoverable silicon raw materials were imported from overseas suppliers. China has implemented rules regulating the import of waste materials into China, under which waste materials are categorized as “automatically permitted,” “restricted” or “prohibited.” If certain imported material is recognized as waste material and is not categorized as “automatically permitted” or “restricted,” it generally will be deemed as “prohibited” for import. The prohibited waste materials are not allowed to be imported into China. The import of restricted waste material is subject to the approval of various government authorities, including environmental protection authorities. On July 3, 2009, the PRC Ministry of Environmental Protection, Ministry of Commerce, National Development and Reform Commission, General Administration of Customs and General

 

33


Table of Contents

Administration of Quality Supervision, Inspection and Quarantine jointly issued the Revised Imported Solid Waste Catalogues, or the Revised Catalogues, which became effective on August 1, 2009. According to the Revised Catalogues, recoverable silicon materials with a purity rate above 99.99% fall into the restricted catalogue and, consequently, the import of such recoverable silicon materials is subject to approvals from environmental protection authorities and other relevant governmental authorities. Currently, we do not import any recoverable silicon materials for our silicon ingot production. However, if we have to import recoverable silicon materials in the future to meet our capacity expansion requirement and we cannot obtain relevant approvals in timely manner or at all, we may be unable to obtain recoverable silicon in sufficient quantities to support our production. If this occurs, we may be forced to rely more heavily on virgin polysilicon suppliers to source silicon in quantities sufficient to support our production, resulting in production delays and increased costs, which could materially and adversely affect our business and results of operations.

Fluctuations in exchange rates could adversely affect our results of operations.

Although most of our sales since our inception have been denominated in Renminbi, in 2009 we generated 42.8% of our revenue from export sales. As a result of our business expansion into the U.S. and European markets, we expect that an increasing portion of our sales will be denominated in U.S. dollars and Euro. A portion of our costs and capital expenditures, including purchase of raw materials and equipment from foreign vendors, are denominated in U.S. dollars and Japanese Yen. In addition, we have outstanding debt obligations, and may continue to incur debts from time to time, denominated and repayable in foreign currencies. We do not currently hedge our exchange rate exposure. We cannot predict the impact of future exchange rate fluctuations on our results of operations and may incur net foreign currency losses in the future. In addition, we make advance payments in U.S. dollars to overseas silicon raw material suppliers, and from time to time, we may incur foreign exchange losses if we request our suppliers to return such advance payments due to changes in our business plans. In 2008, we incurred foreign exchange losses of approximately RMB5.0 million as one third-party supplier returned our U.S. dollar advance payments which depreciated against the Renminbi in 2008. Fluctuations in exchange rates, particularly among the U.S. dollar, Renminbi, Euro and Japanese Yen, may affect our gross and net profit margins and could result in foreign exchange and operating losses.

Our financial statements are expressed in Renminbi and the functional currency of our principal operating subsidiaries, Jiangxi Jinko and Zhejiang Jinko, is also Renminbi. The value of your investment in our ADSs will be affected by the foreign exchange rate between U.S. dollars and Renminbi. In addition, to the extent we hold assets denominated in U.S. dollars, including the net proceeds to us from this offering, any appreciation of Renminbi against the U.S. dollar could result in a change to our statement of operations and a reduction in the value of our U.S. dollar denominated assets. On the other hand, if we decide to convert our Renminbi amounts into U.S. dollars for the purpose of making payments for dividends on our ordinary shares and ADSs or for other business purposes, including foreign debt service, a decline in the value of Renminbi against the U.S. dollar would reduce the U.S. dollar equivalent amounts of the Renminbi we convert. In addition, a depreciation of Renminbi against the U.S. dollar could reduce the U.S. dollar equivalent amounts of our financial results, the value of your investment in our company and the dividends we may pay in the future, if any, all of which may have a material adverse effect on the price of our ADSs.

Renminbi is not a freely convertible currency. The PRC government may take actions that could cause future exchange rates to vary significantly from current or historical exchange rates. The conversion of Renminbi into foreign currencies, including U.S. dollars, has been based on rates set by the People’s Bank of China. On July 21, 2005, in a reversal of a long-standing policy, the PRC government announced that the Renminbi would be permitted to fluctuate within a narrow and managed band against a basket of specified foreign currencies. Since this announcement, the value of the Renminbi has been fluctuating. The Renminbi appreciated against the U.S. dollar by approximately 5.7% as of December 31, 2006, approximately 11.9% as of December 31, 2007, approximately 17.6% as of December 31, 2008 and approximately 17.5% as of December 31, 2009. However, influenced by the global economic crisis, the exchange rate between U.S. dollar and Renminbi has become more unpredictable. While international reactions to the Renminbi revaluation have generally been positive, there

 

34


Table of Contents

remains significant international pressure on the PRC government to adopt an even more flexible foreign currency policy, which could result in further and more significant appreciation of the Renminbi against the U.S. dollar. There can be no assurance that any future movements in the exchange rate of the Renminbi against the U.S. dollar or other foreign currencies will not adversely affect our results of operations and financial condition (including our ability to pay dividends). Conversely, significant depreciation in the Renminbi against major foreign currencies may have a material adverse impact on our results of operations, financial condition and share price because our ADSs are expected to be quoted in U.S. dollars, whereas most of our revenues, costs and expenses are denominated in Renminbi.

In addition, as we increase our sales to international customers, we expect the portion of our sales denominated in foreign currencies, particularly, U.S. dollars and Euros to our total revenue will increase. We also expect to incur increased foreign currency denominated capital expenditures in connection with our capacity expansion plans. In addition, we make advance payments in U.S. dollars to overseas silicon raw material suppliers, and from time to time, we may incur foreign exchange losses if we request our suppliers to return such advance payments due to changes in our business plans. These could expose us to significant risks resulting from fluctuations in currency exchange rates, particularly, among Renminbi, the U.S. dollars, Japanese Yen and Euros.

Very limited hedging transactions are available in China to reduce our exposure to exchange rate fluctuations. While we may decide to enter into hedging transactions in the future, the availability and effectiveness of these hedges may be limited so that we may not be able to successfully hedge our exposure at all. Our currency exchange losses may be magnified by PRC exchange control regulations that restrict our ability to convert Renminbi into foreign currency. As a result, fluctuations in exchange rates may have a material adverse effect on our results of operations.

Our operations are subject to natural disasters, adverse weather conditions, operating hazards and labor disputes.

We may experience earthquakes, floods, snowstorms, typhoon, power outages, labor disputes or similar events beyond our control that would affect our operations. Our manufacturing processes involve the use of hazardous equipment, such as furnaces, squaring machines and wire saws, and we also use, store and generate volatile and otherwise dangerous chemicals and wastes during our manufacturing processes, which are potentially destructive and dangerous if not properly handled or in the event of uncontrollable or catastrophic circumstances, including operating hazards, fires and explosions, natural disasters, adverse weather conditions and major equipment failures, for which we cannot obtain insurance at a reasonable cost or at all.

In addition, our silicon wafer and solar module production and storage facilities are located in close proximity to one another in the Shangrao Economic Development Zone in Jiangxi Province, and our solar cell production and storage facilities are located in close proximity to one another in Haining, Zhejiang Province. The occurrence of any natural disaster, unanticipated catastrophic event or unexpected accident in either of the two locations could result in production curtailments, shutdowns or periods of reduced production, which could significantly disrupt our business operations, cause us to incur additional costs and affect our ability to deliver our products to our customers as scheduled, which could adversely affect our business, financial condition and results of operations. Moreover, such events could result in severe damage to property, personal injuries, fatalities, regulatory enforcement proceedings or in our being named as a defendant in lawsuits asserting claims for large amounts of damages, which in turn could lead to significant liabilities.

We experienced a production disruption due to power blackouts at our facilities in the Shangrao Municipality resulting from severe winter weather conditions in early 2008. In May 2008, Sichuan Province in southwest China experienced a severe earthquake. Although the Sichuan Province earthquake did not materially affect our production capacity and operations, other occurrences of natural disasters, as well as accidents and incidents of adverse weather in or around Shangrao and Haining in the future may result in significant property damage, electricity shortages, disruption of our operations, work stoppages, civil unrest, personal injuries and, in

 

35


Table of Contents

severe cases, fatalities. Such incidents may result in damage to our reputation or cause us to lose all or a portion of our production capacity, and future revenues anticipated to be derived from the relevant facilities.

As our founders collectively hold a controlling interest in us, they have significant influence over our management and their interests may not be aligned with our interests or the interests of our other shareholders.

As of the date of this prospectus, our founders, Xiande Li who is our chairman, Kangping Chen who is our chief executive officer, and Xianhua Li who is our vice president, beneficially owned approximately 35.8%, 21.5% and 14.3%, respectively, of our outstanding ordinary shares on an as-converted basis. Xiande Li, the brother-in-law of Kangping Chen, and Xianhua Li are brothers. Upon completion of this offering, an aggregate of approximately 52.3% of our outstanding ordinary shares will be held by our founders. If the founders act collectively, they will have substantial control over our business, including decisions regarding mergers, consolidations and the sale of all or substantially all of our assets, election of directors, dividend policy and other significant corporate actions. They may take actions that are not in the best interest of our company or our securities holders. For example, this concentration of ownership may discourage, delay or prevent a change in control of our company, which could deprive our shareholders of an opportunity to receive a premium for their shares as part of a sale of our company and might reduce the price of our ADSs. On the other hand, if the founders are in favor of any of these actions, these actions may be taken even if they are opposed by our other shareholders, including you and those who invest in ADSs. In addition, under our third amended and restated articles of association that will become effective upon the completion of this offering, the quorum required for the general meeting of our shareholders is two shareholders entitled to vote and present in person or by proxy or, if the shareholder is a corporation, by its duly authorized representative representing not less than one-third in nominal value of our total issued voting shares. As such, a shareholders resolution may be passed at our shareholders meetings with the presence of our founders only and without the presence of any of our other shareholders, which may not represent the interests of our other shareholders, including holders of ADSs.

Our founders may be obligated to transfer up to 41.3% of our issued and outstanding share capital to holders of our series B redeemable convertible preferred shares for no further consideration, which may result in our founders losing control of our company.

In connection with the investment by the holders of series B redeemable convertible preferred shares in us, our founders executed and delivered a commitment letter to the holders of our series B redeemable convertible preferred shares on December 16, 2008, which was subsequently amended on June 22, 2009. Pursuant to the June 2009 Modification, we will deliver to the holders of series B redeemable convertible preferred shares our audited financial statements for 2010 by April 30, 2011. If by the time we deliver our audited financial statements for 2010, the Qualified IPO has not been completed and our net income after certain adjustments is less than the target amount for 2010, our founders will be obligated to transfer to the holders of series B redeemable convertible preferred shares for no further consideration an aggregate of up to 26,273,540 ordinary shares, representing 41.3% of our issued and outstanding share capital immediately before this offering, which may result in our founders losing control of our company. This offering is expected to constitute a Qualified IPO. See “Description of Share Capital — History of Share Issuances and Other Financings — Share Exchange”, “— June 2009 Modification” and “— September 2009 Modification.” If such transfer occurs, our founders may be unwilling or unable to continue to serve our company in their present positions, and we may not be able to replace them readily with a management team with comparable experience, commitment and incentives in managing our company, if at all. As a result, our business may be severely disrupted and we may have to incur additional expenses in order to recruit and retain new management team and other personnel. In addition, if any of our founders joins a competitor or forms a competing company, we may lose some of our customers and market share. As a result, our business and results of operation may be materially and adversely affected. See “— Our business depends substantially on the continuing efforts of our executive officers and key technical personnel, as well as our ability to maintain a skilled labor force. Our business may be materially and adversely affected if we lose their services.”

 

36


Table of Contents

We have limited insurance coverage and may incur losses resulting from product liability claims, business interruption or natural disasters.

We are exposed to risks associated with product liability claims in the event that the use of our products results in property damage or personal injury. Since our products are ultimately incorporated into electricity generating systems, it is possible that users could be injured or killed by devices that use our products, whether as a result of product malfunctions, defects, improper installations or other causes. Due to our limited operating history, we are unable to predict whether product liability claims will be brought against us in the future or to predict the impact of any resulting adverse publicity on our business. The successful assertion of product liability claims against us could result in potentially significant monetary damages and require us to make significant payments. We carry limited product liability insurance and may not have adequate resources to satisfy a judgment in the event of a successful claim against us. In addition, we do not carry any business interruption insurance. As the insurance industry in China is still in its early stage of development, even if we decide to take out business interruption coverage, such insurance available in China offers limited coverage compared with that offered in many other countries. Any business interruption or natural disaster could result in substantial losses and diversion of our resources and materially and adversely affect our business, financial condition and results of operations.

The grant of employee share options and other share-based compensation could adversely affect our net income.

We adopted a share incentive plan on July 10, 2009 which was subsequently amended and restated, or the 2009 Long Term Incentive Plan. As of the date of this prospectus, we reserved 7,325,122 ordinary shares under the 2009 Long Term Incentive Plan, and share options with respect to 4,536,480 ordinary shares have been granted to our directors, officers and employees pursuant to such plan. U.S. GAAP requires us to recognize share-based compensation as compensation expense in the statement of operations based on the fair value of equity awards on the date of the grant, with the compensation expense recognized over the period in which the recipient is required to provide service in exchange for the equity award. If we grant more share options to attract and retain key personnel, the expenses associated with share-based compensation may adversely affect our net income. However, if we do not grant share options or reduce the number of share options that we grant, we may not be able to attract and retain key personnel.

Our lack of sufficient patent protection in and outside of China may undermine our competitive position and subject us to intellectual property disputes with third parties, both of which may have a material adverse effect on our business, results of operations and financial condition.

We have developed various production process related know-how and technologies in the production of our products. Such know-how and technologies play a critical role in our quality assurance and cost reduction. In addition, we have implemented a number of research and development programs with a view to developing techniques and processes that will improve production efficiency and product quality. Our intellectual property and proprietary rights arising out of these research and development programs will be crucial in maintaining our competitive edge in the solar power industry. As of the date of this prospectus, we had four patents and ten pending patent applications in China. We plan to continue to seek to protect our intellectual property and proprietary knowledge by applying for patents for them. However, we cannot assure you that we will be successful in obtaining patents in China in a timely manner or at all. Moreover, even if we are successful, China currently affords less protection to a company’s intellectual property than some other countries, including the United States. We also use contractual arrangements with employees and trade secret protections to protect our intellectual property and proprietary rights. Nevertheless, contractual arrangements afford only limited protection and the actions we may take to protect our intellectual property and proprietary rights may not be adequate.

 

37


Table of Contents

In addition, others may obtain knowledge of our know-how and technologies through independent development. Our failure to protect our production process, related know-how and technologies and/or our intellectual property and proprietary rights may undermine our competitive position. Third parties may infringe or misappropriate our proprietary technologies or other intellectual property and proprietary rights. Policing unauthorized use of proprietary technology can be difficult and expensive. Litigation, which can be costly and divert management attention and other resources away from our business, may be necessary to enforce our intellectual property rights, protect our trade secrets or determine the validity and scope of our proprietary rights. We cannot assure you that the outcome of such potential litigation will be in our favor. An adverse determination in any such litigation will impair our intellectual property and proprietary rights and may harm our business, prospects and reputation.

We may be exposed to infringement or misappropriation claims by third parties, which, if determined adversely to us, could cause us to pay significant damage awards.

Our success depends on our ability to use and develop our technology and know-how and to manufacture and sell our recovered silicon materials, silicon ingots, silicon wafers, solar cells and solar modules without infringing the intellectual property or other rights of third parties. We may be subject to litigation involving claims of patent infringement or violation of intellectual property rights of third parties. The validity and scope of claims relating to solar power technology patents involve complex scientific, legal and factual questions and analyses and, therefore, may be highly uncertain. The defense and prosecution of intellectual property suits, patent opposition proceedings, trademark disputes and related legal and administrative proceedings can be both costly and time consuming and may significantly divert our resources and the attention of our technical and management personnel. An adverse ruling in any such litigation or proceedings could subject us to significant liability to third parties, require us to seek licenses from third parties, to pay ongoing royalties, or to redesign our products or subject us to injunctions prohibiting the manufacture and sale of our products or the use of our technologies. Protracted litigation could also result in our customers or potential customers deferring or limiting their purchase or use of our products until resolution of such litigation.

Our business depends substantially on the continuing efforts of our executive officers and key technical personnel, as well as our ability to maintain a skilled labor force. Our business may be materially and adversely affected if we lose their services.

Our success depends on the continued services of our executive officers and key personnel, in particular Mr. Xiande Li, Mr. Kangping Chen and Mr. Xianhua Li, who are our founders. We do not maintain key-man life insurance on any of our executive officers and key personnel. If one or more of our executive officers and key personnel are unable or unwilling to continue in their present positions, we may not be able to replace them readily, if at all. As a result, our business may be severely disrupted and we may have to incur additional expenses in order to recruit and retain new personnel. In addition, if any of our executives joins a competitor or forms a competing company, we may lose some of our customers. Each of our executive officers and key personnel has entered into an employment agreement with us that contains confidentiality and non-competition provisions. However, if any dispute arises between our executive officers or key personnel and us, we cannot assure you, in light of uncertainties associated with the PRC legal system, that these agreements could be enforced in China where most of our executive officers and key personnel reside and hold most of their assets. See “— Risks Related to Doing Business in China — Uncertainties with respect to the PRC legal system could have a material adverse effect on us” in this prospectus.

Furthermore, recruiting and retaining capable personnel, particularly experienced engineers and technicians familiar with our products and manufacturing processes, is vital to maintain the quality of our products and improve our production methods. There is substantial competition for qualified technical personnel, and we cannot assure you that we will be able to attract or retain qualified technical personnel. If we are unable to attract and retain qualified employees, key technical personnel and our executive officers, our business may be materially and adversely affected.

 

38


Table of Contents

We and our Chief Strategy Officer may be subject to claims of contractual breach arising from his previous employment agreement.

Mr. Arturo Herrero, our Chief Strategy Officer, was previously employed by Trina Solar Limited, or Trina, our competitor, until January 2010. Mr. Herrero’s employment agreement with Trina contained certain covenants purporting to prohibit Mr. Herrero from competing with Trina in the event his employment relationship with Trina ceased. These provisions include prohibitions for a period of one year after termination on (a) soliciting customers, contacts or clients of Trina, (b) accepting employment with or providing service to any competitor of Trina in the PRC or any other territory in which Trina carries on business and (c) soliciting employees of Trina. If Trina brought legal action against us and/or Mr. Herrero seeking to enforce these provisions, it could seek (i) to enjoin Mr. Herrero from acting in his capacity as our Chief Strategy Officer or any other capacity on our behalf, and (ii) damages for breach of contract or inducement to breach for any loss or injury it suffered as a result of the alleged breach. Under Hong Kong law which governs Mr. Herrero’s employment agreement with Trina, restrictive covenants are a restraint of trade and prima facie void, and for a covenant to be enforceable the employer must demonstrate that the covenant protects a legitimate business interest such as goodwill, a client base, confidential information or a stable workforce and goes no further than is reasonably necessary to protect that interest. As a matter of policy, the Hong Kong courts will not revise an unenforceable restraint to make it enforceable. The courts will simply strike out or void the relevant provision. We believe that restraint (b) goes further than is reasonably necessary to protect the legitimate business interest of Trina and so would be likely ruled unenforceable under Hong Kong law. In addition, Mr. Herrero has not approached or solicited, and has undertaken that he will not approach or solicit Trina’s clients, customers, contacts or employees. Therefore, we believe that Trina would be unlikely to prevail on such claims if brought. However, if Trina were successful in such legal action, we could lose the services of Mr. Herrero, and/or become obligated to pay damages to Trina. Such an event could materially and adversely affect our corporate strategy formulation, our results of operations and financial condition. Moreover, even if Trina did not prevail in such a legal action, the fact that such action was brought could itself materially adversely affect our reputation. Regardless of the outcome, any such legal action could also be time consuming, costly and distract both Mr. Herrero’s and our management’s attention, which would materially and adversely affect our business, results of operations and the trading price of and the value of an investment in our ADSs.

Compliance with environmental, safe production and construction regulations can be costly, while non-compliance with such regulations may result in adverse publicity and potentially significant monetary damages, fines and suspension of our business operations.

We use, store and generate volatile and otherwise dangerous chemicals and wastes during our manufacturing processes, and are subject to a variety of government regulations related to the use, storage and disposal of such hazardous chemicals and waste. We are required to comply with all PRC national and local environmental protection regulations. Under such regulations, we are prohibited from commencing commercial operations of our manufacturing facilities until we have obtained the relevant approvals from PRC environmental protection authorities. In addition, we are required to conduct a safety evaluation on our manufacturing and storage instruments every two years and to file the results of the evaluation with the dangerous chemicals safety supervision and administration authorities. Moreover, we are required to obtain construction permits before commencement of building production facilities. We commenced construction of a portion of our solar cell and module production facilities prior to obtaining the construction permits and commenced operations of certain of our production facilities prior to obtaining the environmental approvals for commencing commercial operation and completing the required safety evaluation procedure. Although we have subsequently obtained all required environmental approvals covering all of our existing production capacity except a portion of our solar cell and module production capacity, we cannot assure you that we will not be penalized by the relevant government authorities for any prior non-compliance with the PRC environmental protection, safe production and construction regulations. We are still in the process of obtaining the requisite environmental approval for the portion of our solar cell and module production capacity and construction permits for a portion of our solar cell and module production facilities, but we cannot assure you that we will be able to obtain such approval in a

 

39


Table of Contents

timely manner or at all. Failure to obtain such approval and permits may subject us to fines or disrupt our operations and construction, which may materially and adversely affect our business, results of operations and financial condition.

In addition, the PRC government may issue more stringent environmental protection, safe production and construction regulations in the future and the costs of compliance with new regulations could be substantial. If we fail to comply with the future environmental, safe production and construction laws and regulations, we may be required to pay fines, suspend construction or production, or cease operations. Moreover, any failure by us to control the use of, or to adequately restrict the discharge of, dangerous substances could subject us to potentially significant monetary damages and fines or the suspension of our business operations.

Future failure to make full contribution to the registered capital of our principal operating subsidiaries in China may subject us to fines, which may materially and adversely affect our reputation, financial condition and results of operations.

In September 2008, Jiangxi Jinko, one of our principal subsidiaries in China, obtained the approval of the Foreign Trade and Economic Cooperation Department of Jiangxi Province for the increase in its registered capital to US$190.0 million, approximately US$81.5 million of which has been contributed as of the date of this prospectus. Under the relevant PRC laws and regulations, Paker, our wholly-owned subsidiary and Jiangxi Jinko’s sole shareholder, is required to contribute the remaining US$108.5 million by the end of January 2011. On December 7, 2009, Zhejiang Jinko was approved by the Foreign Trade and Economic Cooperation Bureau of Haining to increase its registered capital to US$34.0 million, approximately US$29.2 million of which has been contributed as of the date of this prospectus. According to the relevant PRC laws and regulations, Jiangxi Jinko and Paker are required to contribute the remaining approximately US$4.8 million to the registered capital of Zhejiang Jinko by December 18, 2011. We plan to use part of the proceeds from this offering to make the full contribution before the required deadlines. According to the relevant PRC laws and regulations, failure by a shareholder of a company to make full contribution to the company’s registered capital before the required deadline may subject the shareholder to a fine in the amount of 5% to 15% of the contribution that such shareholder has committed but has failed to make before the deadline. There is no assurance that we will have sufficient funds to make the full contributions to our PRC subsidiaries’ registered capital before such deadlines. If for any reason we fail to raise sufficient funds or otherwise fail to make the full contributions to our PRC subsidiaries’ registered capital before their respective deadlines, we may be subject to such fines, which may materially and adversely affect our reputation, financial condition and results of operations.

Risks Related to Doing Business in China

If we were required to obtain the prior approval of the PRC Ministry of Commerce, or MOFCOM, for or in connection with our corporate restructuring in 2007 and 2008, our failure to do so could have a material adverse effect on our business, operating results and trading price of our ADSs.

On August 8, 2006, six PRC governmental and regulatory agencies, including MOFCOM and the CSRC, promulgated a rule entitled “Provisions Regarding Mergers and Acquisitions of Domestic Enterprises by Foreign Investors,” or Circular 10, which became effective on September 8, 2006. Article 11 of Circular 10 requires PRC domestic enterprises or domestic natural persons to obtain the prior approval of MOFCOM when an offshore company established or controlled by them proposes to merge with or acquire a PRC domestic company with which such enterprises or persons have a connected relationship.

We undertook a restructuring in 2007, or the 2007 Restructuring. See “Our Corporate History and Structure — Our Domestic Restructuring.” Our founders and Paker obtained the approval of the Foreign Trade and Economic Cooperation Department of Jiangxi Province, or Jiangxi MOFCOM, for the acquisition and the share pledge, or the 2007 acquisition and pledge. However, because our founders are PRC natural persons and they controlled both Paker and Jiangxi Desun, the 2007 acquisition and pledge would be subject to Article 11 of Circular 10 and therefore subject to approval by MOFCOM at the central government level.

 

40


Table of Contents

To remedy this past non-compliance with Circular 10 in connection with the 2007 Restructuring, we undertook another corporate restructuring in 2008, or the 2008 Restructuring, under which the share pledge was terminated on July 28, 2008 and Paker transferred all of its equity interest in Jiangxi Desun to Long Faith Creation Limited, or Long Faith, an unrelated Hong Kong company, on July 31, 2008. In addition, we visited Jiangxi MOFCOM in November 2008 and made inquiries regarding the possible adverse effect, if any, that the past non-compliance in connection with the 2007 acquisition and pledge may have on us. Furthermore, on November 11, 2008, Jiangxi MOFCOM confirmed in its written reply to us that there had been no modification to the former approvals for the 2007 acquisition and pledge and Paker’s transfer of its equity interest in Jiangxi Desun to Long Faith, and we might continue to rely on those approvals for further transactions. Our PRC counsel, Chen & Co. Law Firm, has advised us that, based on their understanding of current PRC laws and regulations and the confirmation in Jiangxi MOFCOM’s written reply, and because Paker has transferred all of its equity interest in Jiangxi Desun to Long Faith Creation Limited and has terminated the share pledge and has duly completed all relevant approval and registration procedures for such transfer and termination, the possibility for the approval relating to the 2007 acquisition and pledge to be revoked is remote and our corporate structure currently complies in all respects with Circular 10. Nevertheless, we cannot assure you that MOFCOM will not revoke such approval and subject us to regulatory actions, penalties or other sanctions because of such past non-compliance. If the approval of Jiangxi MOFCOM for the 2007 acquisition and pledge were revoked and we were not able to obtain MOFCOM’s retrospective approval for the 2007 acquisition and pledge, Jiangxi Desun may be required to return the tax benefits to which only a foreign-invested enterprise was entitled and which were recognized by us during the period from April 10, 2007 to December 31, 2007, and the profit distribution to Paker in December 2008 may be required to be unwound. Under an indemnification letter issued by our founders to us, our founders have agreed to indemnify us for any monetary losses we may incur as a result of any violation of Circular 10 in connection with the restructuring we undertook in 2007. We cannot assure you, however, that this indemnification letter will be enforceable under the PRC law, our founders will have sufficient resources to fully indemnify us for such losses, or that we will not otherwise suffer damages to our business and reputation as a result of any sanctions for such non-compliance.

As part of our 2008 Restructuring, Jiangxi Jinko and Jiangxi Desun entered into certain transactions, or the 2008 Restructuring Transactions. See “Our Corporate History and Structure — Our Domestic Restructuring.”

Our PRC counsel, Chen & Co. Law Firm, has advised us, based on their understanding of current PRC laws and regulations, and subject to any future rules, regulations, requirements, or interpretations to the contrary promulgated by competent PRC governmental authorities, that Circular 10, which governs the merger with or acquisition of shares or assets of PRC domestic enterprises by foreign investors for the purpose of establishing foreign-invested enterprises, does not apply to the 2008 Restructuring Transactions because we believe the 2008 Restructuring Transactions, as a whole, were not a merger with or acquisition of Jiangxi Desun’s shares or assets. However, Circular 10 is unclear in certain respects, including what constitutes a merger with or acquisition of PRC domestic enterprises and what constitutes circumvention of its approval requirements. If MOFCOM subsequently determines that its approval of the 2008 Restructuring Transactions were required, we may face regulatory actions or other sanctions by MOFCOM or other PRC regulatory agencies. Such actions may include compelling us to terminate the contracts between Jiangxi Desun and our company, the limitation of our operating privileges in China, the imposition of fines and penalties on our operations in China, delay or restriction on the repatriation of the proceeds from this offering into China, restrictions or prohibition on the payment or remittance of dividends by Jiangxi Jinko or others that may have a material adverse effect on our business, financial condition, results of operations, reputation and prospects, as well as the trading price of our ADSs.

If we were required to obtain the prior approval of the China Securities Regulatory Commission, or CSRC, for or in connection with this offering and the listing of our ADSs on the NYSE, our failure to do so could cause the offering to be delayed or cancelled.

Circular 10 also requires that an offshore special purpose vehicle, or SPV, which is controlled by a PRC resident for the purpose of listing its rights and interests in a PRC domestic enterprise on an overseas securities

 

41


Table of Contents

exchange through the listing of the SPV’s shares, obtain approval from the CSRC prior to publicly listing its securities on such overseas securities exchange. On September 21, 2006, the CSRC published procedures specifying documents and materials that must be submitted by SPVs seeking CSRC approval of their overseas listings. Our PRC counsel, Chen & Co. Law Firm, has advised us, based on their understanding of current PRC laws and regulations, and subject to any future rules, regulations, requirements, or interpretations to the contrary promulgated by competent PRC governmental authorities, that CSRC approval is not required for our initial public offering or the listing of our ADSs on the NYSE because:

 

   

the CSRC approval requirement under the Circular 10 only applies to overseas listings of SPVs that have used their existing or newly issued equity interest to acquire existing or newly issued equity interest in PRC domestic companies, or the SPV-domestic company share swap, and there has not been any SPV-domestic company share swap in our corporate history; and

 

   

Paker’s interest in Jiangxi Jinko was obtained by means of green field investment, or the incorporation of Jiangxi Jinko, rather than through the acquisition of shares or assets of an existing PRC domestic enterprise.

However, if the CSRC or another PRC governmental agency subsequently determines that we are required to obtain CSRC approval prior to the completion of this offering, this offering will be delayed until we obtain CSRC approval, which may take many months. If during or following our offering it is determined that CSRC approval is required, we may face regulatory actions or other sanctions from the CSRC or other PRC regulatory agencies. These agencies may impose fines and penalties on our operations in China, limit our operating privileges in China, or take other actions that could have a material adverse effect on our business, financial condition, results of operations, reputation and prospects, as well as the trading price of our ADSs. The CSRC or other PRC regulatory agencies also may take actions requiring us, or making it advisable for us, to halt this offering before settlement and delivery of the ADSs offered hereby. Consequently, if you engage in market trading or other activities in anticipation of and prior to settlement and delivery, you do so at the risk that settlement and delivery may not occur.

Adverse changes in political and economic policies of the PRC government could have a material adverse effect on the overall economic growth of China, which could reduce the demand for our products and materially and adversely affect our competitive position.

Our business is based in China and a majority of our sales are made in China. Accordingly, our business, financial condition, results of operations and prospects are affected significantly by economic, political and legal developments in China. The PRC economy differs from the economies of most developed countries in many respects, including:

 

   

the level of government involvement;

 

   

the level of development;

 

   

the growth rate;

 

   

the control of foreign exchange; and

 

   

the allocation of resources.

While the PRC economy has grown significantly in the past 30 years, the growth has been uneven, both geographically and among various sectors of the economy. The PRC government has implemented various measures to encourage economic growth and guide the allocation of resources. Some of these measures benefit the overall PRC economy, but may have a negative effect on us. For example, our financial condition and results of operations may be materially and adversely affected by government control over capital investments or changes in tax regulations that are applicable to us.

 

42


Table of Contents

The PRC economy has been transitioning from a planned economy to a more market-oriented economy. Although in recent years the PRC government has implemented measures emphasizing the utilization of market forces for economic reform, the reduction of state ownership of productive assets and the establishment of sound corporate governance in business enterprises, a substantial portion of the productive assets in China is still owned by the PRC government. The continued control of these assets and other aspects of the national economy by the PRC government could materially and adversely affect our business. The PRC government also exercises significant control over China’s economic growth through allocating resources, controlling payment of foreign currency-denominated obligations, setting monetary policy and providing preferential treatment to particular industries or companies. We cannot predict whether changes in China’s political, economic and social conditions, laws, regulations and policies will have any material adverse effect on our current or future business, financial conditions and results of operations.

Uncertainties with respect to the PRC legal system could have a material adverse effect on us.

We are incorporated in Cayman Islands and are subject to laws and regulations applicable to foreign investment in China and, in particular, laws applicable to wholly foreign owned companies. The PRC legal system is based on written statutes. Prior court decisions have limited precedential value. Since 1979, PRC legislation and regulations have significantly enhanced the protections afforded to various forms of foreign investments in China. However, since these laws and regulations are relatively new and the PRC legal system continues to rapidly evolve, the interpretations of many laws, regulations and rules are not always uniform and enforcement of these laws, regulations and rules involve uncertainties, which may limit legal protections available to us. For example, we may have to resort to administrative and court proceedings to enforce the legal protection that we enjoy either by law or contract. However, since PRC administrative authorities and courts have significant discretion in interpreting and implementing statutory and contractual terms, it may be more difficult than in more developed legal systems to evaluate the outcome of administrative and court proceedings and the level of legal protection we enjoy. These uncertainties may impede our ability to enforce the contracts we have entered into with our business partners, clients and suppliers. In addition, such uncertainties, including the inability to enforce our contracts, could materially adversely affect our business and operations. Furthermore, intellectual property rights and confidentiality protections in China may not be as effective as in the United States or other countries. Accordingly, we cannot predict the effect of future developments in the PRC legal system, including the promulgation of new laws, changes to existing laws or the interpretation or enforcement thereof, or the preemption of national laws by local regulations. These uncertainties could limit the legal protections available to us and other foreign investors, including you. In addition, any litigation in China may be protracted and result in substantial costs and diversion of resources and management attention.

Recent PRC regulations relating to overseas investment by PRC residents may restrict our overseas and cross-border investment activities and adversely affect the implementation of our strategy as well as our business and prospects.

The SAFE issued a public notice in October 2005, or the SAFE notice, requiring PRC residents, including both legal persons and natural persons, to register with the competent local SAFE branch before establishing or controlling any company outside China, referred to as an “offshore special purpose company,” for the purpose of acquiring any assets of or equity interest in PRC companies and raising funds from overseas. In addition, any PRC resident that is the shareholder of an offshore special purpose company is required to amend its SAFE registration with the local SAFE branch with respect to that offshore special purpose company in connection with any increase or decrease of capital, transfer of shares, merger, division, equity investment or creation of any security interest over any asset located in China. If any PRC shareholder of an offshore special purpose company fails to make the required SAFE registration and amendment, the PRC subsidiaries of that offshore special purpose company may be prohibited from distributing their profits and the proceeds from any reduction in capital, share transfer or liquidation to the offshore special purpose company. Moreover, failure to comply with the SAFE registration and amendment requirements described above could result in liability under PRC laws for evasion of applicable foreign exchange restrictions. Our current beneficial owners who are PRC residents have

 

43


Table of Contents

registered with the local SAFE branch as required under the SAFE notice. However, they have not yet completed the procedure for amending their registration with regard to the change in our shareholding structure. Although we are cooperating with the relevant SAFE branch to amend their SAFE registration, we cannot assure you that they can complete the amendment procedure in a timely manner. The failure of these beneficial owners to amend their SAFE registrations in a timely manner pursuant to the SAFE notice or the failure of future beneficial owners of our company who are PRC residents to comply with the registration procedures set forth in the SAFE notice may subject such beneficial owners and our PRC subsidiaries to fines and legal sanctions and may also result in restrictions on our PRC subsidiaries’ ability to distribute profits to us or otherwise materially and adversely affect our business.

Our China-sourced income is subject to PRC withholding tax under the new Enterprise Income Tax Law of the PRC, and we may be subject to PRC enterprise income tax at the rate of 25% when more detailed rules or precedents are promulgated.

We are a Cayman Islands holding company with substantially all of our operations conducted through our operating subsidiaries in China. Under the new Enterprise Income Tax Law, or the EIT Law, of the PRC and its implementation regulations, both of which became effective on January 1, 2008, China-sourced income of foreign enterprises, such as dividends paid by a PRC subsidiary to its overseas parent, is generally subject to a 10% withholding tax. Under an arrangement between China and Hong Kong, such dividend withholding tax rate is reduced to 5% if a Hong Kong resident enterprise owns over 25% of the PRC company distributing the dividends. As Paker is a Hong Kong company and owns 100% of the equity interest in Jiangxi Jinko and 25% of the equity interest in Zhejiang Jinko directly, any dividends paid by Jiangxi Jinko and Zhejiang Jinko to Paker will be entitled to a withholding tax at the reduced rate of 5% after obtaining approval from competent PRC tax authority, provided that neither our company nor Paker is deemed to be a PRC tax resident enterprise as described below. However, according to the Circular of the State Administration of Taxation on How to Understand and Identify “Beneficial Owner” under Tax Treaties, effective on October 27, 2009, an applicant for bi-lateral treaty benefits, including the benefits under the arrangement between China and Hong Kong on dividend withholding tax, that does not carry out substantial business activities or is an agent or a conduit company may not be deemed as a “beneficial owner” of the PRC subsidiary and therefore, may not enjoy such treaty benefits. If Paker is determined to be ineligible for such treaty benefits, any dividends paid by Jiangxi Jinko and Zhejiang Jingko to Paker will be subject to standard PRC withholding tax rates at 10%.

The EIT Law, however, also provides that enterprises established outside China whose “de facto management bodies” are located in China are considered “tax resident enterprises” and will generally be subject to the uniform 25% enterprise income tax rate as to their global income. Under the implementation regulations, “de facto management bodies” is defined as the bodies that have, in substance, overall management control over such aspects as the production and business, personnel, accounts and properties of an enterprise. On April 22, 2009, the State Administration of Taxation promulgated a circular that sets out procedures and specific criteria for determining whether “de facto management bodies” for overseas incorporated, domestically controlled enterprises are located in China. However, as this circular only applies to enterprises incorporated under laws of foreign jurisdictions that are controlled by PRC enterprises or groups of PRC enterprises, it remains unclear how the tax authorities will determine the location of “de facto management bodies” for overseas incorporated enterprises that are controlled by individual PRC residents such as our company and Paker. Therefore, although a substantial majority of the members of our management team as well as the management team of Paker are located in China, it remains unclear whether the PRC tax authorities would require or permit our company or Paker to be recognized as PRC tax resident enterprises. If our company and Paker are considered PRC tax resident enterprises for PRC enterprise income tax purposes, any dividends distributed from Jiangxi Jinko and Zhejiang Jinko to Paker and ultimately to our company, could be exempt from the PRC withholding tax; however, our company and Paker will be subject to the uniform 25% enterprise income tax rate as to our global income.

 

44


Table of Contents

Dividends payable by us to our foreign investors and gains on the sale of our shares or ADSs may become subject to PRC enterprise income tax liabilities.

The implementation regulations of the EIT Law provide that (i) if the enterprise that distributes dividends is domiciled in China, or (ii) if gains are realized from transferring equity interests of enterprises domiciled in China, then such dividends or capital gains are treated as China-sourced income. The EIT Law and the implementation regulations have only recently taken effect. Currently, there are no detailed rules or precedents governing the procedures and specific criteria for determining “domicile”, which are applicable to our company or Paker. As such, it is not clear how “domicile” will be interpreted under the EIT Law. It may be interpreted as the jurisdiction where the enterprise is incorporated or where the enterprise is a tax resident. Therefore, if our company and Paker are considered PRC tax resident enterprises for tax purposes, any dividends we pay to our overseas shareholders or ADS holders, as well as any gains realized by such shareholders or ADSs holders from the transfer of our shares or ADSs, may be viewed as China-sourced income and, as a consequence, be subject to PRC enterprise income tax at 10% or a lower treaty rate.

If the dividends we pay to our overseas shareholders or ADS holders or gains realized by such shareholders or ADS holders from the transfer of our shares or ADSs are subject to PRC enterprise income tax, we would be required to withhold taxes on such dividends, and our overseas shareholders or ADS holders would be required to declare taxes on such gains to PRC tax authorities. In such case, the value of your investment in our shares or ADSs may be materially and adversely affected. Moreover, any overseas shareholders or ADS holders who fail to declare such taxes to PRC tax authorities may be ordered to make tax declaration within a specified time limit and be subject to fines or penalties.

We rely principally on dividends and other distributions on equity paid by our principal operating subsidiaries, Jiangxi Jinko and Zhejiang Jinko, and limitations on their ability to pay dividends to us could have a material adverse effect on our business and results of operations.

We are a holding company and rely principally on dividends paid by our principal operating subsidiaries, Jiangxi Jinko and Zhejiang Jinko, for cash requirements. If Jiangxi Jinko or Zhejiang Jinko incurs debt in its own name in the future, the instruments governing the debt may restrict dividends or other distributions on its equity interest to us. Furthermore, applicable PRC laws, rules and regulations permit payment of dividends by our PRC subsidiaries only out of their retained earnings, if any, determined in accordance with PRC accounting standards. Our PRC subsidiaries are required to set aside a certain percentage of their after-tax profit based on PRC accounting standards each year as reserve funds for future development and employee benefits, in accordance with the requirements of relevant laws and provisions in their respective articles of associations. As a result, our PRC subsidiaries may be restricted in their ability to transfer any portion of their net income to us whether in the form of dividends, loans or advances. Any limitation on the ability of our subsidiaries to pay dividends to us could materially adversely limit our ability to grow, make investments or acquisitions that could be beneficial to our businesses, pay dividends or otherwise fund and conduct our business.

PRC regulations of direct investment and loans by offshore holding companies to PRC entities may delay or limit us from using the proceeds of our initial public offering to make additional capital contributions or loans to our PRC subsidiaries.

Any capital contributions or loans that we, as an offshore entity, make to our PRC subsidiaries, including from the proceeds of our initial public offering, are subject to PRC regulations. For example, any of our loans to either of our PRC subsidiaries cannot exceed the difference between the total amount of investment our PRC subsidiary is approved to make under relevant PRC laws and the respective registered capital of our PRC subsidiary, and must be registered with the local branch of the SAFE as a procedural matter. In addition, our capital contributions to our PRC subsidiaries must be approved by MOFCOM or their local counterparts. We cannot assure you that we will be able to obtain these approvals on a timely basis, or at all. If we fail to obtain such approvals, our ability to make equity contributions or provide loans to our PRC subsidiaries or to fund their

 

45


Table of Contents

operations may be negatively affected, which could adversely affect their liquidity and ability to fund their working capital and expansion projects and meet their obligations and commitments.

The enforcement of new labor contract law and increase in labor costs in the PRC may adversely affect our business and our profitability.

A new Labor Contract Law came into effect on January 1, 2008 and the Implementation Rules of Labor Contract Law of the PRC were promulgated and became effective on September 18, 2008. The new Labor Contract Law and the Implementation Rules impose more stringent requirements on employers with regard to entering into written employment contracts, hiring temporary employees and dismissing employees. In addition, under the newly promulgated Regulations on Paid Annual Leave for Employees, which came into effect on January 1, 2008, and its Implementation Measures, which were promulgated and became effective on September 18, 2008, employees who have served more than one year for an employer are entitled to a paid vacation ranging from five to 15 days, depending on length of service. Employees who waive such vacation time at the request of employers shall be compensated for three times their normal salaries for each waived vacation day. As a result of the new law and regulations, our labor costs are expected to increase. Increases in our labor costs and future disputes with our employees could adversely affect our business, financial condition and results of operations.

Our failure to make statutory social welfare payments to our employees could adversely and materially affect our financial condition and results of operations.

According to the relevant PRC laws and regulations, we are required to pay certain statutory social security benefits for our employees, including medical care, injury insurance, unemployment insurance, maternity insurance and pension benefits. Our failure to comply with these requirements may subject us to monetary penalties imposed by the relevant PRC authorities and proceedings initiated by our employees, which could materially and adversely affect our business, financial condition and results of operations.

Based on the prevailing local practice in Jiangxi Province resulting from the discrepancy between national laws and their implementation by local governments, Jiangxi Jinko did not pay statutory social security benefits, including medical care, injury insurance, unemployment insurance, maternity insurance and pension benefits, for all of its employees. For similar reasons, Zhejiang Jinko did not pay statutory social security benefits in Zhejiang Province for all of its employees. We estimate the aggregate amount of unpaid social security benefits to be RMB2.4 million, RMB4.7 million and RMB17.9 million (US$2.6 million), respectively, as of December 31, 2007, 2008 and 2009. We may be required by the labor administrative bureaus to pay these statutory social security benefits within a designated time period. In addition, an employee is entitled to compensation if such employee terminates its labor contract due to failure by the employer to make due payment of social security benefits. We have made provisions for such unpaid social security benefits of our former and current PRC subsidiaries. However, we cannot assure you that we will not be subject to late charges and penalties for such delinquency. Late charges, penalties or legal or administrative proceedings to which we may be subject could materially and adversely affect our reputation, financial condition and results of operations.

All employee participants in the 2009 Long Term Incentive Plan who are PRC citizens may be required to register with SAFE. We may also face regulatory uncertainties that could restrict our ability to adopt additional option plans for our directors and employees under PRC law.

On March 28, 2007, SAFE issued the Operating Procedures on Administration of Foreign Exchange regarding PRC Individuals’ Participating in Employee Stock Ownership Plan and Stock Option Plan of Overseas Listed Companies, or the Stock Option Rule. For any plans which are so covered and are adopted by an overseas listed company, the Stock Option Rule requires the employee participants who are PRC citizens to register with SAFE or its local branch within ten days of the beginning of each quarter. In addition, the Stock Option Rule also requires the employee participants who are PRC citizens to follow a series of requirements on making necessary

 

46


Table of Contents

applications for foreign exchange purchase quota, opening special bank account and filings with SAFE or its local branch before they exercise their stock option.

The Stock Option Rule has not yet been made publicly available or formally promulgated by SAFE, but SAFE has begun enforcing its provisions. Nonetheless, it is not predictable whether it will continue to enforce this rule or adopt additional or different requirements with respect to equity compensation plans or incentive plans.

If it is determined that the 2009 Long Term Incentive Plan is subject to the Stock Option Rule, failure to comply with such provisions may subject us and the participants of the 2009 Long Term Incentive Plan who are PRC citizens to fines and legal sanctions and prevent us from further granting options under the 2009 Long Term Incentive Plan to our employees, which could adversely affect our business operations.

We face risks related to health epidemics and other outbreaks.

Our business could be adversely affected by the effects of influenza A (H1N1), avian flu, severe acute respiratory syndrome, or SARS, or other epidemic outbreak. In April 2009, an outbreak of influenza A caused by the H1N1 virus occurred in Mexico and the United States, and spread into a number of countries rapidly. There have also been reports of outbreaks of a highly pathogenic avian flu, caused by the H5N1 virus, in certain regions of Asia and Europe. In past few years, there were reports on the occurrences of avian flu in various parts of China, including a few confirmed human cases. An outbreak of avian flu in the human population could result in a widespread health crisis that could adversely affect the economies and financial markets of many countries, particularly in Asia. Additionally, any recurrence of SARS, a highly contagious form of atypical pneumonia, similar to the occurrence in 2003 which affected China, Hong Kong, Taiwan, Singapore, Vietnam and certain other countries, would also have similar adverse effects. These outbreaks of contagious diseases and other adverse public health developments in China would have a material adverse effect on our business operations. These could include our ability to travel or ship our products outside China as well as temporary closure of our manufacturing facilities. Such closures or travel or shipment restrictions would severely disrupt our business operations and adversely affect our financial condition and results of operations. We have not adopted any written preventive measures or contingency plans to combat any future outbreak of avian flu, SARS or any other epidemic.

Risks Related to Our ADSs and This Offering

There has been no public market for our ordinary shares or ADSs prior to this offering, and you may not be able to resell our ADSs at or above the price you paid, or at all.

Prior to this initial public offering, there has been no public market for our ordinary shares or ADSs. We have received approval to list the ADSs on the NYSE. If an active trading market for our ADSs does not develop after this offering, the market price and liquidity of our ADSs will be materially and adversely affected.

The initial public offering price for our ADSs is determined by negotiations between us and the underwriters and may bear no relationship to the market price for our ADSs after this initial public offering. We cannot assure you that an active trading market for our ADSs will develop or that the market price of our ADSs will not decline below the initial public offering price.

The market price for our ADSs may be volatile.

The market price for our ADSs is likely to be highly volatile and subject to wide fluctuations in response to factors including, but not limited to, the following:

 

   

announcements of new products by us or our competitors;

 

   

technological breakthroughs in the solar and other renewable power industries;

 

47


Table of Contents
   

reduction or elimination of government subsidies and economic incentives for the solar industry;

 

   

news regarding any gain or loss of customers by us;

 

   

news regarding recruitment or loss of key personnel by us or our competitors;

 

   

announcements of competitive developments, acquisitions or strategic alliances in our industry;

 

   

changes in the general condition of the global economy and credit markets;

 

   

general market conditions or other developments affecting us or our industry;

 

   

the operating and stock price performance of other companies, other industries and other events or factors beyond our control;

 

   

regulatory developments in our target markets affecting us, our customers or our competitors;

 

   

announcements regarding patent litigation or the issuance of patents to us or our competitors;

 

   

announcements of studies and reports relating to the conversion efficiencies of our products or those of our competitors;

 

   

actual or anticipated fluctuations in our quarterly results of operations;

 

   

changes in financial projections or estimates about our financial or operational performance by securities research analysts;

 

   

changes in the economic performance or market valuations of other solar power technology companies;

 

   

release or expiry of lock-up or other transfer restrictions on our outstanding ordinary shares or ADSs; and

 

   

sales or perceived sales of additional ordinary shares or ADSs.

In addition, the securities market has from time to time experienced significant price and volume fluctuations that are not related to the operating performance of particular companies. These market fluctuations may also have a material adverse effect on the market price of our ADSs.

Because the initial public offering price is substantially higher than our net tangible book value per share, you will incur immediate and substantial dilution.

The initial public offering price per ADS is substantially higher than the net tangible book value per ADS prior to the offering. Accordingly, if you purchase our ADSs in this offering, you will incur immediate dilution of approximately US$3.19 in the net tangible book value per ADS from the price you pay for our ADSs, representing the difference between:

 

   

the assumed initial public offering price of US$12.00 per ADS (the mid-point of the estimated initial public offering price range set forth on the front cover of this prospectus), and

 

   

the pro forma as adjusted net tangible book value per ADS of US$8.81 as of December 31, 2009, assuming the automatic conversion of our outstanding series A and series B redeemable convertible preferred shares into ordinary shares and after giving effect to this offering.

You may find additional information in the section entitled “Dilution” in this prospectus. If we issue additional ADSs in the future, you may experience further dilution. In addition, you may experience further dilution to the extent that ordinary shares are issued upon the exercise of share options. Substantially all of the ordinary shares issuable upon the exercise of our outstanding share options will be issued at a purchase price on a per ADS basis that is less than the initial public offering price per ADS in this offering.

 

48


Table of Contents

We may not be able to pay any dividends on our ordinary shares and ADSs.

Under Cayman Islands law, we may only pay dividends out of our profits or our share premium account subject to our ability to service our debts as they fall due in the ordinary course of our business. Our ability to pay dividends will therefore depend on our ability to generate sufficient profits. We cannot give any assurance that we will declare dividends of any amounts, at any rate or at all in the future. We have not paid any dividends in the past. Future dividends, if any, will be paid at the discretion of our board of directors and will depend upon our future operations and earnings, capital expenditure requirements, general financial conditions, legal and contractual restrictions and other factors that our board of directors may deem relevant. You should refer to the “Dividend Policy” section in this prospectus for additional information regarding our current dividend policy and the risk factor entitled “— Risks Related to Doing Business in China — We rely principally on dividends and other distributions on equity paid by our principal operating subsidiaries, Jiangxi Jinko and Zhejiang Jinko, and limitations on their ability to pay dividends to us could have a material adverse effect on our business and results of operations” above for additional legal restrictions on the ability of our PRC subsidiaries to pay dividends to us.

Future sales or issuances, or perceived future sales or issuances, of substantial amounts of our ordinary shares or ADSs could adversely affect the price of our ADSs.

If our existing shareholders sell, or are perceived as intending to sell, substantial amounts of our ordinary shares or ADSs, including those issued upon the exercise of our outstanding share options, following this offering, the market price of our ADSs could fall. Such sales, or perceived potential sales, by our existing shareholders might make it more difficult for us to issue new equity or equity-related securities in the future at a time and place we deem appropriate. The ADSs offered in this offering will be eligible for immediate resale in the public market without restrictions, and shares held by our existing shareholders may also be sold in the public market in the future subject to the restrictions contained in Rule 144 and Rule 701 under the Securities Act and the applicable lock-up agreements. If any existing shareholder or shareholders sell a substantial amount of ordinary shares after the expiration of the lock-up period, the prevailing market price for our ADSs could be adversely affected. See “Shares Eligible for Future Sale” and “Underwriting” for additional information regarding resale restrictions.

In addition, we may issue additional ADSs or ordinary shares for future acquisitions or other purposes. If we issue additional ADSs or ordinary shares, your ownership interests in our company would be diluted and this in turn could have a material adverse effect on the price of our ADSs.

Our management will have broad discretion as to the use of a portion of the proceeds from this offering, and may not use the proceeds effectively.

We will use the net proceeds from this offering for the expansion of our solar cell and solar module production capacity, investment in research and development, and for working capital and other general corporate purposes. However, we have not designated specific expenditures for all of those proceeds. Accordingly, our management will have significant flexibility and discretion in applying our net proceeds of this offering. Depending on future events and other changes in the business climate, we may determine at a later time to use the net proceeds for different purposes. Our shareholders may not agree with the manner in which our management chooses to allocate and spend those proceeds. Moreover, our management may use the net proceeds for purposes that may not increase the market value of our ADSs.

We may need additional capital and may sell additional ADSs or other equity securities or incur indebtedness, which could result in additional dilution to our shareholders or increase our debt service obligations.

We believe that our current cash, anticipated cash flow from operations and the proceeds from this offering will be sufficient to meet our anticipated cash needs for the next 12 months. We may, however, require additional

 

49


Table of Contents

cash resources due to changed business conditions or other future developments, including any investments or acquisitions we may decide to pursue. If these resources are insufficient to satisfy our cash requirements, we may seek to sell additional equity or debt securities or obtain a credit facility. The sale of additional equity securities could result in additional dilution to our shareholders. The incurrence of indebtedness would limit our ability to pay dividends or require us to seek consents for the payment of dividends, increase our vulnerability to general adverse economic and industry conditions, limit our ability to pursue our business strategies, require us to dedicate a substantial portion of our cash flow from operations to service our debt, thereby reducing the availability of our cash flow to fund capital expenditure, working capital requirements and other general corporate needs, and limit our flexibility in planning for, or reacting to, changes in our business and our industry. We cannot assure you that financing will be available in amounts or on terms acceptable to us, if at all.

Holders of ADSs have fewer rights than shareholders and must act through the depositary to exercise those rights.

As a holder of ADSs, you will not be treated as one of our shareholders and you will not have shareholder rights. Instead, the depositary will be treated as the holder of the shares underlying your ADSs. However, you may exercise some of the shareholders’ rights through the depositary, and you will have the right to withdraw the shares underlying your ADSs from the deposit facility as described in “Description of American Depositary Shares — Deposit, Withdrawal and Cancellation.”

Holders of ADSs may only exercise the voting rights with respect to the underlying ordinary shares in accordance with the provisions of the deposit agreement. Under our third amended and restated articles of association that will become effective upon the completion of this offering, the minimum notice period required to convene a general meeting is ten days. When a general meeting is convened, you may not receive sufficient notice of a shareholders’ meeting to permit you to withdraw your ordinary shares to allow you to cast your vote with respect to any specific matter. In addition, the depositary and its agents may not be able to send voting instructions to you or carry out your voting instructions in a timely manner. We plan to make all reasonable efforts to cause the depositary to extend voting rights to you in a timely manner, but we cannot assure you that you will receive the voting materials in time to ensure that you can instruct the depositary to vote your ADSs. Furthermore, the depositary and its agents will not be responsible for any failure to carry out any instructions to vote, for the manner in which any vote is cast or for the effect of any such vote. As a result, you may not be able to exercise your right to vote and you may lack recourse if your ADSs are not voted as you requested. In addition, in your capacity as an ADS holder, you will not be able to call a shareholder meeting.

You may be subject to limitations on transfers of your ADSs.

Your ADSs are transferable on the books of the depositary. However, the depositary may close its transfer books at any time or from time to time when it deems expedient in connection with the performance of its duties. In addition, the depositary may refuse to deliver, transfer or register transfers of ADSs generally when our books or the books of the depositary are closed, or at any time if we or the depositary deem it advisable to do so because of any requirement of law or of any government or government body, or under any provision of the deposit agreement, or for any other reason.

As a holder of our ADSs, your right to participate in any future rights offerings may be limited, which may cause dilution to your holdings and you may not receive cash dividends if it is unlawful or impractical to make them available to you.

We may from time to time distribute rights to our shareholders, including rights to acquire our securities. However, we cannot make rights available to you in the United States unless we register the rights and the securities to which the rights relate under the Securities Act or an exemption from the registration requirements is available. In addition, under the deposit agreement, the depositary will not make rights available to you unless the distribution to ADS holders of both the rights and any related securities are either registered under the

 

50


Table of Contents

Securities Act, or exempted from registration under the Securities Act with respect to all holders of ADSs. We are under no obligation to file a registration statement with respect to any such rights or securities or to endeavor to cause such a registration statement to be declared effective. Moreover, we may not be able to establish an exemption from registration under the Securities Act. Accordingly, as a holder of our ADSs, you may be unable to participate in our rights offerings and may experience dilution in your holdings.

In addition, the depositary of our ADSs has agreed to pay to you the cash dividends or other distributions it or the custodian receives on our ordinary shares or other deposited securities after deducting its fees and expenses. You will receive these distributions in proportion to the number of ordinary shares your ADSs represent. However, the depositary may, at its discretion, decide that it is unlawful or impractical to make a distribution available to any holders of ADSs. For example, the depositary may determine that it is not practicable to distribute certain property through the mail, or that the value of certain distributions may be less than the cost of mailing them. In these cases, the depositary may decide not to distribute such property and you will not receive such distribution. Neither we nor the depositary have any obligation to take any other action to permit the distribution of ADSs, ordinary shares, rights or anything else to holders of ADSs. This means that you may not receive the distribution we make on our ordinary shares or any value for them if it is unlawful or impractical for us to make them available to you. These restrictions may have a material adverse effect on the value of your ADSs.

We are a Cayman Islands company and, because judicial precedent regarding the rights of shareholders is more limited under Cayman Islands law than that under U.S. law, you may have less protection for your shareholder rights than you would under U.S. law.

Our corporate affairs are governed by our memorandum and articles of association, the Cayman Islands Companies Law and the common law of the Cayman Islands. The rights of shareholders to take action against the directors, actions by minority shareholders and the fiduciary responsibilities of our directors to us under Cayman Islands law are to a large extent governed by the common law of the Cayman Islands. The common law of the Cayman Islands is derived in part from comparatively limited judicial precedent in the Cayman Islands as well as that from English common law, which has persuasive, but not binding, authority on a court in the Cayman Islands. The rights of our shareholders and the fiduciary responsibilities of our directors under Cayman Islands law are not as clearly established as they would be under statutes or judicial precedent in some jurisdictions in the United States. In particular, the Cayman Islands have a less developed body of securities laws than the United States. In addition, some U.S. states, such as Delaware, have more fully developed and judicially interpreted bodies of corporate law than the Cayman Islands.

In addition, Cayman Islands companies may not have standing to initiate a shareholder derivative action before federal courts of the United States.

As we are a Cayman Islands company and substantially all of our assets are located outside of the United States and substantially all of our current operations are conducted in China, there is uncertainty as to whether the courts of the Cayman Islands or China would recognize or enforce judgments of U.S. courts predicated upon the civil liability provisions of the securities laws of the United States or any state against us and our officers and directors, most of whom are not residents of the United States and the substantial majority of whose assets are located outside the United States. In addition, it is uncertain whether the Cayman Islands or PRC courts would entertain original actions brought in the Cayman Islands or in China against us or our officers and directors predicated on the federal securities laws of the United States. See “Enforceability of Civil Liabilities.” There is no statutory recognition in the Cayman Islands of judgments obtained in the United States although the courts of the Cayman Islands would recognize as a valid judgment, a final and conclusive judgment in personam obtained in a federal or state court of the United States under which a sum of money is payable, other than a sum payable in respect of multiple damages, taxes or other charges of a like nature or in respect of a fine or other penalty and would give a judgment based thereon; provided that (i) such court had proper jurisdiction over the parties subject to such judgment; (ii) such court did not contravene the rules of natural justice of the Cayman Islands; (iii) such

 

51


Table of Contents

judgment was not obtained by fraud; (iv) the enforcement of the judgment would not be contrary to the public policy of the Cayman Islands; (v) no new admissible evidence relevant to the action is submitted prior to the rendering of the judgment by the courts of the Cayman Islands; and (vi) there is due compliance with the correct procedures under the laws of the Cayman Islands.

As a result of all of the above, shareholders of a Cayman Islands company may have more difficulty in protecting their interests in the face of actions taken by management, members of the board of directors or controlling shareholders than they would as shareholders of a company incorporated in a jurisdiction in the United States. For example, contrary to the general practice in most corporations incorporated in the United States, Cayman Islands incorporated companies may not generally require that shareholders approve sales of all or substantially all of a company’s assets. The limitations described above will also apply to the depositary who is treated as the holder of the shares underlying your ADSs.

As a company incorporated in the Cayman Islands, we may adopt certain home country practices in relation to corporate governance matters. These practices may afford less protection to shareholders than they would enjoy if we complied fully with the NYSE corporate governance listing standards.

As a non-U.S. company with shares listed on the NYSE, we are subject to the NYSE corporate governance listing standards. However, in reliance on Section 303A.11 of the NYSE Listed Company Manual, which permits a foreign private issuer to follow the corporate governance practices of its home country, we have adopted certain corporate governance practices that may differ significantly from the NYSE corporate governance listing standards. For example, we may include non-independent directors as members of our compensation committee and nominating and corporate governance committee, and our independent directors may not hold regularly scheduled meetings at which only independent directors are present. Such home country practice differs from the NYSE corporate governance listing standards, because there are no specific provisions under the Companies Law of the Cayman Islands imposing such requirements. Accordingly, executive directors, who may also be our major shareholders or representatives of our major shareholders, may have greater power to make or influence major decisions than they would if we complied with all the NYSE corporate governance listing standards. While we may adopt certain practices that are in compliance with the laws of the Cayman Islands, such practices may differ from more stringent requirements imposed by the NYSE rules and as such, our shareholders may be afforded less protection under Cayman Islands law than they would under the NYSE rules applicable to U.S. domestic issuers.

Our third amended and restated articles of association contain anti-takeover provisions that could prevent a change in control even if such takeover is beneficial to our shareholders.

Our third amended and restated articles of association that will become effective upon the completion of this offering contain provisions that could delay, defer or prevent a change in control of our company that could be beneficial to our shareholders. These provisions could also discourage proxy contests and make it more difficult for you and other shareholders to elect directors and take other corporate actions. As a result, these provisions could limit the price that investors are willing to pay in the future for our ADSs. These provisions might also discourage a potential acquisition proposal or tender offer, even if the acquisition proposal or tender offer is at a price above the then current market price of our ADSs. These provisions provide that our board of directors has authority, without further action by our shareholders, to issue preferred shares in one or more series and to fix their designations, powers, preferences, privileges, and relative participating, optional or special rights and the qualifications, limitations or restrictions, including dividend rights, conversion rights, voting rights, terms of redemption and liquidation preferences, any or all of which may be greater than the rights associated with our ordinary shares, in the form of ADSs or otherwise. Our board of directors may decide to issue such preferred shares quickly with terms calculated to delay or prevent a change in control of our company or make the removal of our management more difficult. If our board of directors decides to issue such preferred shares, the price of our ADSs may fall and the voting and other rights of holders of our ordinary shares and ADSs may be materially and adversely affected.

 

52


Table of Contents

We may be classified as a passive foreign investment company, which could result in adverse U.S. federal income tax consequences to U.S. Holders of our ADSs or shares.

We do not expect to be a passive foreign investment company, or PFIC, for U.S. federal income tax purposes for our current taxable year ending December 31, 2010. However, we must make a separate determination each taxable year as to whether we are a PFIC (after the close of each taxable year). Accordingly, we cannot assure you that we will not be a PFIC for our current taxable year ending December 31, 2010 or any future taxable year. A non-U.S. corporation will be considered a PFIC for any taxable year if either (1) at least 75% of its gross income is passive income or (2) at least 50% of the value of its assets (based on an average of the quarterly values of the assets during the taxable year) is attributable to assets that produce or are held for the production of passive income. The value of our assets for purposes of the PFIC asset test will generally be determined based on the market price of our ADSs and shares, which is likely to fluctuate after this offering. If we are treated as a PFIC for any taxable year during which a U.S. Holder (as defined in “Taxation — United States Federal Income Taxation — Passive Foreign Investment Company”) holds an ADS or a share, certain adverse U.S. federal income tax consequences could apply to such U.S. Holder. See “Taxation — U.S. Federal Income Taxation — Passive Foreign Investment Company.”

We will incur increased costs as a result of being a public company.

As a public company, we will incur significant legal, accounting and other expenses that we did not incur as a private company. We will incur costs associated with our public company reporting requirements. In addition, the Sarbanes-Oxley Act, as well as rules subsequently implemented by the SEC, and the NYSE, have imposed increased regulation and required enhanced corporate governance practices for public companies. Our efforts to comply with evolving laws, regulations and standards in this regard are likely to result in increased general and administrative expenses and a diversion of management time and attention from revenue generating activities to compliance activities. We also expect these new rules and regulations to make it more difficult and more expensive for us to obtain director and officer liability insurance, and we may be required to accept reduced policy limits and coverage or incur substantially higher costs to obtain the same or similar coverage. As a result, it may be more difficult for us to attract and retain qualified candidates to serve on our board of directors or as executive officers.

 

53


Table of Contents

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

This prospectus contains forward-looking statements that relate to our current expectations and views of future events. The forward-looking statements are contained principally in the sections entitled “Prospectus Summary,” “Risk Factors,” “Use of Proceeds,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Business.” These statements relate to events that involve known and unknown risks, uncertainties and other factors, including those listed under “Risk Factors,” all of which are difficult to predict and many of which are beyond our control, which may cause our actual results, performance or achievements to be materially different from any future results, performances or achievements expressed or implied by the forward-looking statements.

In some cases, these forward-looking statements can be identified by words or phrases such as “may,” “will,” “expect,” “anticipate,” “aim,” “estimate,” “intend,” “plan,” “believe,” “potential,” “continue,” “projects,” “future,” “targets,” “outlook,” “is/are likely to” or other similar expressions. We have based these forward-looking statements largely on our current expectations and projections about future events and financial trends that we believe may affect our financial condition, results of operations, business strategy and financial needs. These forward-looking statements include, among other things, statements relating to:

 

   

our expectations regarding the general economic conditions;

 

   

our expectations regarding the worldwide demand for electricity and the market for solar power;

 

   

our beliefs regarding the effects of environmental regulation and long-term fossil fuel supply constraints;

 

   

our beliefs regarding the importance of environmentally friendly power generation;

 

   

our expectations regarding government support, government subsidies and economic incentives to the solar power industry;

 

   

availability of debt financing;

 

   

our beliefs regarding the acceleration of adoption of solar technologies;

 

   

our expectations regarding advancements in our process technologies and cost savings from such advancements;

 

   

our beliefs regarding the competitiveness of our products;

 

   

our beliefs regarding the advantages of our business model;

 

   

our expectations regarding the scaling and expansion of our production capacity;

 

   

our expectations regarding our ability to maintain and expand our existing customer base;

 

   

our expectations regarding our ability to expand our product sales to customers outside of China;

 

   

our expectations regarding entering into or maintaining joint venture enterprises and other strategic investments;

 

   

our expectations regarding increased revenue growth and our ability to achieve profitability resulting from increases in our production volumes;

 

   

our expectations regarding our ability to secure raw materials in the future;

 

   

our expectations regarding the price trends of silicon raw materials;

 

   

our expectations regarding the demand for our products;

 

   

our expectations regarding the price trends of silicon wafers, solar cells and solar modules;

 

   

our beliefs regarding our ability to successfully implement our strategies;

 

54


Table of Contents
   

our beliefs regarding our abilities to secure sufficient funds to meet our cash needs for our operations and capacity expansion;

 

   

our future business development, results of operations and financial condition;

 

   

determination of the fair value of our ordinary shares and preferred shares;

 

   

our planned use of proceeds;

 

   

competition from other manufacturers of silicon wafers, solar cells and solar modules, other renewable energy systems and conventional energy suppliers; and

 

   

PRC government policies regarding foreign investments.

This prospectus also contains data related to the solar power market worldwide and in China. These market data, including market data from Solarbuzz, include projections that are based on a number of assumptions. The solar power market may not grow at the rates projected by the market data, or at all. The failure of the solar power market to grow at the projected rates may have a material adverse effect on our business and the market price of our ADSs. In addition, the rapidly changing nature of the solar power market subjects any projections or estimates relating to the growth prospects or future condition of our market to significant uncertainties. If any one or more of the assumptions underlying the market data turns out to be incorrect, actual results may differ from the projections based on these assumptions. You should not place undue reliance on these forward-looking statements.

The forward-looking statements made in this prospectus relate only to events or information as of the date on which the statements are made in this prospectus. Except as required by law, we undertake no obligation to update or revise publicly any forward-looking statements, whether as a result of new information, future events or otherwise, after the date on which the statements are made or to reflect the occurrence of unanticipated events. You should read this prospectus and the documents that we refer to in this prospectus and have filed as exhibits to the registration statement, of which this prospectus is a part, completely and with the understanding that our actual future results may be materially different from what we expect.

 

55


Table of Contents

USE OF PROCEEDS

We estimate that we will receive net proceeds from this offering of approximately US$60.1 million, or approximately US$69.7 million if the underwriters exercise their option to purchase additional ADSs from us in full, after deducting underwriting discounts and estimated offering expenses payable by us. These estimates are based upon an assumed initial public offering price of US$12.00 per ADS, the mid-point of the estimated range of the initial public offering price shown on the front cover of this prospectus. A US$1.00 increase (decrease) in the assumed public offering price of US$12.00 per ADS would increase (decrease) the net proceeds to us from this offering by US$5.4 million, after deducting the estimated underwriting discounts and commissions and estimated aggregate offering expenses payable by us and assuming no other change to the number of ADSs offered by us as set forth on the cover page of this prospectus.

We intend to use the net proceeds we receive from this offering primarily for the following purposes:

 

   

approximately US$50 million to expand our silicon ingot, silicon wafer, solar cell and solar module production capacity, including procuring new equipment and expanding or constructing manufacturing facilities for silicon ingot, silicon wafer, solar cell and solar module production;

 

   

approximately US$5 million to invest in research and development to improve product quality, reduce silicon manufacturing costs, improve conversion efficiency and overall performance of our products and improve the productivity of our silicon ingot, wafer, cell and module manufacturing process; and

 

   

the balance of the net proceeds from this offering to be used for working capital and other general corporate purposes.

The foregoing represents our current intentions to use and allocate the net proceeds of this offering based upon our present plans and business conditions. We believe that available credit under existing bank credit facilities, the proceeds of this offering, as well as cash on hand and expected operating cash flow, will be sufficient to meet our anticipated cash needs, including our cash needs for working capital and capital expenditures for the next 12 months. Our management, however, will have significant flexibility and discretion to apply the net proceeds of this offering. Depending on future events and other changes in the business climate, we may determine at a later time to use the net proceeds differently or for purposes other than as described in this prospectus.

In utilizing the proceeds of this offering, as an offshore holding company, we are permitted, under PRC laws and regulations, to provide funding to our existing and any future PRC subsidiaries through capital contributions, subject to satisfaction of applicable government registration and approval requirements. We cannot assure you that we can obtain the approvals from the relevant government authorities, or complete the registration and filing procedures required to use our net proceeds as described above, in each case on a timely basis, or at all. See “Risk Factors — Risks Related to Our Business and Our Industry — Future failure to make full contribution to the registered capital of our principal operating subsidiaries in China may subject us to fines, which may materially and adversely affect our reputation, financial condition and results of operations” and “Risk Factors — Risks Related to Doing Business in China — PRC regulations of direct investment and loans by offshore holding companies to PRC entities may delay or limit us from using the proceeds of our initial public offering to make additional capital contributions or loans to our PRC subsidiaries.”

 

56


Table of Contents

CAPITALIZATION

The following table sets forth our capitalization as of December 31, 2009:

 

   

on actual basis;

 

   

on a pro forma basis to reflect the automatic conversion (i) based on a 1:1 conversion ratio of all of our outstanding series A redeemable convertible preferred shares into an aggregate of 5,375,150 ordinary shares and (ii) based on an approximately 1:1.0054 conversion ratio of all of our outstanding series B redeemable convertible preferred shares into an aggregate of 7,481,250 ordinary shares, upon the completion of this offering; and

 

   

on a pro forma as adjusted basis to further give effect to the issuance of and sale of 23,340,000 ordinary shares in the form of ADS by us in this offering, assuming an initial offering price of US$12.00 per ADS, the mid-point of the estimated range of the initial public offering price, taking into account the ADS to ordinary share ratio, and, after deducting underwriting discounts and commissions and estimated offering expenses payable by us, and assuming no exercise of the underwriters’ option to purchase additional ADSs and no other change to the number of ADSs offered by us as set forth on the cover page of this prospectus.

 

    As of December 31, 2009
    Actual   Pro Forma(1)   Pro Forma,
As Adjusted(1)
    RMB   US$   RMB   US$   RMB   US$
    (in thousands)

Long-term borrowings

  348,750.0   51,092.2   348,750.0   51,092.2   348,750.0   51,092.2

Series A redeemable convertible preferred shares, US$0.00002 par value, 5,375,150 shares authorized; 5,375,150 shares issued and outstanding, actual; nil pro forma and pro forma as adjusted; (liquidation preference of RMB245,815,200)

  189,057.9   27,697.1        

Series B redeemable convertible preferred shares, US$0.00002 par value, 7,441,450 shares authorized; 7,441,450 shares issued and outstanding, actual; nil pro forma and pro forma as adjusted; (liquidation preference of RMB360,528,960)

  287,703.8   42,148.8        

Equity:

           

Ordinary shares, US$0.00002 par value, 487,183,400 shares authorized; 50,731,450 shares issued and outstanding, actual; 63,587,850 shares issued and outstanding on a pro forma basis and 86,927,850 shares issued and outstanding on a pro forma as adjusted
basis(1)

  7.8   1.1   9.6   1.4   12.7   1.9

Additional paid-in capital(2)

  193,929.5   28,410.8   670,689.5   98,256.6   1,081,249.8   158,404.0

Statutory reserves

  38,434.7   5,630.7   38,434.7   5,630.7   38,434.7   5,630.7

Retained earnings

  233,703.8   34,237.8   233,758.7   34,245.8   233,758.7   34,245.8

Total equity(2)

  466,075.8   68,280.4   942,892.5   138,134.5   1,353,455.9   198,282.4

Total capitalization(2)

  1,291,587.5   189,218.5   1,291,642.5   189,226.7   1,702,250.9   249,374.6

 

(1)   Excludes 4,536,480 ordinary shares issuable upon the exercise of options granted under our 2009 Long Term Incentive Plan.

 

(2)   A US$1.00 increase (decrease) in the assumed initial public offering price of US$12.00 per ADS would increase (decrease) each of the additional paid-in capital, total equity and total capitalization by US$5.4 million.

You should read this table together with our financial statements and the related notes included elsewhere in this prospectus and the information under “Management’s Discussion and Analysis of Financial Condition and Results of Operations.”

 

57


Table of Contents

DILUTION

If you invest in our ADSs, your interest will be diluted to the extent of the difference between the initial public offering price per ADS and our net tangible book value per ADS after this offering. Dilution results from the fact that the initial public offering price per ordinary share is substantially in excess of the book value per ordinary share attributable to the existing shareholders for our presently outstanding ordinary shares.

Our net tangible book value as of December 31, 2009 was approximately US$61.6 million or US$1.21 per ordinary share and US$4.85 per ADS. Net tangible book value represents our total consolidated assets, minus the amount of our total consolidated intangibles, liabilities, non-controlling interests, series A redeemable convertible preferred shares and series B redeemable convertible preferred shares. Our pro forma net tangible book value as of December 31, 2009 was US$131.4 million, or US$2.07 per ordinary share and US$8.27 per ADS. Pro forma net tangible book value per ordinary share after giving effect to conversion of series A redeemable convertible preferred shares only represents our total consolidated assets, minus the amount of our total consolidated intangibles, liabilities, non-controlling interests and series B redeemable convertible preferred shares, divided by the number of ordinary shares outstanding after giving effect to the automatic conversion of all outstanding series A redeemable convertible preferred shares into 5,375,150 ordinary shares. Pro forma net tangible book value per ordinary share after giving effect to conversion of series B redeemable convertible preferred shares only represents our total consolidated assets, minus the amount of our total consolidated intangibles, liabilities, non-controlling interests and series A redeemable convertible preferred shares, divided by the number of ordinary shares outstanding after giving effect to the automatic conversion of all outstanding series B redeemable convertible preferred shares into 7,481,250 ordinary shares. Pro forma net tangible book value per ordinary share after giving effect to the conversion of all outstanding series A and series B redeemable convertible preferred shares represents our total consolidated assets, minus the amount of our total consolidated intangibles, liabilities and non-controlling interests, divided by the number of ordinary shares outstanding after giving effect to the automatic conversion of all outstanding series A and series B redeemable convertible preferred shares into 12,856,400 ordinary shares.

Our pro forma net tangible book value as of December 31, 2009 would have increased to US$191.6 million or US$2.20 per ordinary share and US$8.81 per ADS without taking into account any other changes in such net tangible book value after December 31, 2009 except for the issuance and sale of 23,340,000 ordinary shares in the form of ADSs offered by us in this offering, at the assumed initial public offering price of US$12.00 per ADS, the midpoint of the estimated range of the initial public offering price, and after deduction of underwriting discount and estimated aggregate offering expenses of this offering payable by us.

This represents an immediate increase in net tangible book value of US$0.14 per ordinary share to the existing shareholders (assuming automatic conversion of all outstanding series A and series B redeemable convertible preferred shares) and an immediate dilution in net tangible book value of US$0.80 per ordinary share and US$3.19 per ADS to investors purchasing ADSs in this offering.

 

58


Table of Contents

The following table illustrates such per share dilution:

 

Estimated initial public offering price per ordinary share

   US$ 3.00

Net tangible book value per ordinary share as of December 31, 2009

   US$ 1.21

Pro forma net tangible book value per ordinary share as of December 31, 2009 after giving effect to the conversion of series A redeemable convertible preferred shares only

   US$ 1.59

Pro forma net tangible book value per ordinary share as of December 31, 2009 after giving effect to the conversion of series B redeemable convertible preferred shares only

   US$ 1.78

Pro forma net tangible book value per ordinary share as of December 31, 2009 after giving effect to the conversion of all outstanding series A and series B redeemable convertible preferred shares

   US$ 2.07

Pro forma as adjusted net tangible book value per ordinary share

   US$ 2.20

Pro forma as adjusted net tangible book value per ADS

   US$ 8.81

Amount of dilution in net tangible book value per ordinary share to new investors in this
offering

   US$ 0.80

Amount of dilution in net tangible book value per ADS to new investors in this offering

   US$ 3.19

A US$1.00 increase (decrease) in the assumed initial public offering price of US$12.00 per ADS would increase (decrease) our pro forma net tangible book value after giving effect to this offering by US$0.06 per ordinary share and US$0.25 per ADS and the dilution in pro forma net tangible book value per ordinary share and per ADS to new investors in the offering by US$0.19 per ordinary share and US$0.75 per ADS, assuming no change in the number of ADSs offered by us as set forth on the cover page of this prospectus and after deducting underwriting discount and other offering expenses.

The pro forma information discussed above is illustrative only. Our net tangible book value following the completion of this offering is subject to adjustment based on the actual initial public offering price of our ADSs and other terms of this offering determined at pricing.

The following table summarizes, on a pro forma basis as of the date of this prospectus, the differences between existing shareholders, including the holders of all of our outstanding convertible preferred shares which are automatically convertible into ordinary shares upon the completion of this offering, and the new investors with respect to the number of ordinary shares in the form of ADSs purchased from us, in the total consideration paid and the average price per ordinary share and per ADS. In the case of the ordinary shares purchased by the new investors, the total consideration paid and amounts per share paid are before deducting underwriting discount and estimated aggregate offering expenses, assuming an initial public offering price of US$12.00 per ADS, the midpoint of the estimated range of the initial public offering price. The total number of ordinary shares does not include ordinary shares underlying the ADSs issuable upon the exercise of the underwriters’ option to purchase additional ADSs.

The information in the following table is illustrative only and the total consideration paid and the average price per ordinary share is subject to adjustment based on the actual initial public offering price of our ADSs and other terms of this offering determined at pricing.

 

     Ordinary Shares
Purchased
   Total Consideration    Average
Price Per
Ordinary
Share
   Average
Price Per
ADS
             
         Number         (%)    Amount    (%)      

Existing shareholders

   63,587,850 (1)    73.2    US$ 72.50 million    50.9    US$ 1.14    US$ 4.56

New investors

   23,340,000      26.8    US$ 70.00 million    49.1    US$ 3.00    US$ 12.00
                            

Total

   86,927,850      100.0    US$ 142.50 million    100.0      
                            

 

(1)   Assumes automatic conversion of all of our outstanding redeemable convertible preferred shares into ordinary shares.

 

59


Table of Contents

The discussion and table above also assume no exercise of any outstanding options under the 2009 Long Term Incentive Plan. As of the date of this prospectus, options to purchase 4,536,480 ordinary shares were outstanding under the 2009 Long Term Incentive Plan.

A US$1.00 increase (decrease) in the assumed initial public offering price of US$12.00 per ADS would increase (decrease) total consideration paid by new investors, total consideration paid by all shareholders (including existing shareholders and new investors) and the average price per ADS paid by all shareholders (including existing shareholders and new investors) by US$5.8 million, US$5.8 million and US$0.07 per ordinary share and US$0.27 per ADS, respectively, assuming no change in the number of ADSs sold by us as set forth on the cover page of this prospectus and without deducting underwriting discount and other offering expenses.

The dilution to new investors will be US$0.78 per ordinary share and US$3.10 per ADS, if the underwriters exercise in full their option to purchase additional ADSs.

The following table summarizes, on a pro forma basis as of the date of this prospectus, the differences among existing shareholders, including the holders of all of our outstanding convertible preferred shares which are automatically convertible into ordinary shares upon the completion of this offering, holders of outstanding options granted under the 2009 Long Term Incentive Plan upon the exercise of such outstanding options, and the new investors with respect to the number of ordinary shares in the form of ADSs purchased from us, in the total consideration paid and the average price per ordinary share and per ADS. In the case of the ordinary shares purchased by the new investors, the total consideration paid and amounts per share paid are before deducting underwriting discount and estimated aggregate offering expenses, assuming an initial public offering price of US$12.00 per ADS, the midpoint of the estimated range of the initial public offering price. The total number of ordinary shares does not include ordinary shares underlying the ADSs issuable upon the exercise of the underwriters’ option to purchase additional ADSs.

The information in the following table is illustrative only and the total consideration paid and average price per ordinary share is subject to adjustment based on the actual initial public offering price of our ADSs and other terms of this offering determined at pricing.

 

    Ordinary Shares
Purchased
   Total Consideration    Average
Price Per
Ordinary
Share
   Average
Price Per
ADS
    Number     (%)    Amount    (%)      

Existing shareholders

  63,587,850 (1)    69.5    US$ 72.5 million    47.7    US$1.14    US$ 4.56

Holders of options

  4,536,480 (2)    5.0    US$ 9.4 million    6.2    US$2.08
   US$ 8.32

New investors

  23,340,000      25.5    US$ 70.0 million    46.1    US$3.00    US$ 12.00
                           

Total

  91,464,330      100.0    US$ 151.9 million    100.0      
                           

 

(1)   Assumes the automatic conversion of all of our outstanding redeemable convertible preferred shares into ordinary shares.

 

(2)   Assumes the exercise of all outstanding options under the 2009 Long Term Incentive Plan as of date of this prospectus.

A US$1.00 increase (decrease) in the assumed initial public offering price of US$12.00 per ADS would increase (decrease) total consideration paid by new investors, total consideration paid by all shareholders (including existing shareholders, holders of options and new investors) and the average price per ADS paid by all shareholders (including existing shareholders, holders of options and new investors) by US$5.8 million, US$5.8 million and US$0.06 per ordinary share and US$0.26 per ADS, respectively, assuming no change in the number of ADSs sold by us as set forth on the cover page of this prospectus and without deducting underwriting discount and other offering expenses.

The dilution to new investors will be US$0.78 per ordinary share and US$3.13 per ADS, if the underwriters exercise in full their option to purchase additional ADSs.

 

60


Table of Contents

DIVIDEND POLICY

We have never declared or paid dividends, nor do we have any present plan to pay any cash dividends on our ordinary shares in the foreseeable future. We currently intend to retain our available funds and any future earnings to operate and expand our business.

We are a holding company incorporated in the Cayman Islands. We rely on dividends paid to us by our wholly-owned subsidiaries in China, Jiangxi Jinko and Zhejiang Jinko, to fund the payment of dividends, if any, to our shareholders. PRC regulations currently permit our PRC subsidiaries to pay dividends only out of their retained profits, if any, as determined in accordance with PRC accounting standards and regulations. In addition, our PRC subsidiaries are required to set aside a certain amount of their retained profits each year, if any, to fund certain statutory reserves. These reserves may not be distributed as cash dividends. Furthermore, when Jiangxi Jinko, Zhejiang Jinko or Paker incurs debt on its own behalf, the instruments governing the debt may restrict its ability to pay dividends or make other distributions to us.

Subject to our third amended and restated memorandum and articles of association and applicable laws, our board of directors has complete discretion on whether to pay dividends, subject to the approval of our shareholders. Even if our board of directors decides to pay dividends, the form, frequency and amount will depend upon our future operations and earnings, capital requirements and surplus, general financial conditions, contractual restrictions and other factors that the board of directors may deem relevant. If we pay any dividends, we will pay our ADS holders to the same extent as holders of our shares, subject to the terms of the deposit agreement, including the fees and expenses payable thereunder. See “Description of American Depositary Shares.” Cash dividends on our ADSs, if any, will be paid in U.S. dollars.

 

61


Table of Contents

EXCHANGE RATE INFORMATION

We publish our financial statements in Renminbi. The conversion of Renminbi into U.S. dollars in this prospectus is solely for the convenience of readers. For all dates and periods through December 31, 2008, exchange rates of Renminbi into U.S. dollars are based on the noon buying rate in The City of New York for cable transfers of Renminbi as certified for customs purposes by the Federal Reserve Bank of New York. For January 1, 2009 and all later dates and periods, the exchange rate refers to the exchange rate as set forth in the H.10 statistical release of the Federal Reserve Board. Unless otherwise noted, all translations from Renminbi to U.S. dollars and from U.S. dollars to Renminbi in this prospectus were made at a rate of RMB6.8259 to US$1.00, the noon buying rate in effect as of December 31, 2009. We make no representation that any Renminbi or U.S. dollar amounts could have been, or could be, converted into U.S. dollars or Renminbi, as the case may be, at any particular rate, the rates stated below, or at all.

The Renminbi is not freely convertible into foreign currency. Since January 1, 1994, the PBOC has set and published daily a base exchange rate with reference primarily to the supply and demand of Renminbi against the U.S. dollar in the market during the prior day. On July 21, 2005, the PBOC announced a reform of its exchange rate system allowing the Renminbi to fluctuate within a narrow and managed band against a basket of foreign currencies.

The following table sets forth information concerning exchange rates between the RMB and the U.S. dollar for the periods indicated.

 

     Exchange rate

Period

   Period end    Average(1)    Low    High
     (RMB per US$1.00)

2004

   8.2765    8.2768    8.2774    8.2764

2005

   8.0702    8.1826    8.2765    8.0702

2006

   7.8041    7.9579    8.0702    7.8041

2007

   7.2946    7.5806    7.8127    7.2946

2008

   6.8225    6.9193    7.2946    6.7800

2009

   6.8259    6.8307    6.8176    6.8470

November

   6.8265    6.8271    6.8300    6.8255

December

   6.8259    6.8275    6.8299    6.8244

2010

           

January

   6.8268    6.8269    6.8295    6.8258

February

   6.8258    6.8285    6.8330    6.8258

March

   6.8258    6.8262    6.8254    6.8270

April

   6.8247    6.8255    6.8229    6.8275

May (through May 7)

   6.8254    6.8257    6.8245    6.8265

 

Source:   Federal Reserve Bank of New York for December 2008 and prior periods and H.10 statistical release of the Federal Reserve Board for January 2009 and later periods.

 

(1) Annual averages are calculated from month-end rates. Monthly averages are calculated using the average of the daily rates during the relevant period.

On May 7, 2010, the exchange rate as set forth in the H.10 statistical release of the Federal Reserve Board was RMB6.8254 to US$1.00.

 

62


Table of Contents

OUR CORPORATE HISTORY AND STRUCTURE

We are a Cayman Islands holding company and conduct substantially all of our business through our operating subsidiaries in China, Jiangxi Jinko, and Zhejiang Jinko. We own 100% of the equity interest in Paker, a Hong Kong holding company, which owns 100% of the equity interest in Jiangxi Jinko. Paker and Jiangxi Jinko own 25% and 75%, respectively, of the equity interest in Zhejiang Jinko.

We have also established a number of subsidiaries to provide sales and marketing, payment settlement and logistics services to support our overseas expansion. JinkoSolar International Limited and JinkoSolar GmbH, which are incorporated in Hong Kong and Germany, respectively, are strategically located to increase our visibility and penetration in target market regions. In addition, Jinko Import and Export was established to facilitate our import and export activities in the PRC.

The following diagram illustrates our corporate structure and the place of organization and ownership interest of each of our subsidiaries immediately before this offering:

LOGO

Our History

We commenced our operations in June 2006 through Jiangxi Desun, which was established by three PRC citizens: Min Liang, Xiande Li and Xiafang Chen with an initial registered capital of RMB8.0 million on June 6, 2006. Min Liang and Xiafang Chen held the shares of Jiangxi Desun on behalf of Kangping Chen and Xianhua Li, respectively, and are both family members of Kangping Chen and Xiande Li. In January 2007, Min Liang and Xiafang Chen transferred the equity interest they held in Jiangxi Desun to Kangping Chen and Xiande Li, respectively. At the same time, Xiande Li, Kangping Chen and Xianhua Li made additional capital contributions to Jiangxi Desun and increased its registered capital to RMB20.0 million. As the result, Xiande Li, Kangping Chen and Xianhua Li became the only three holders of equity interests in Jiangxi Desun as of January 15, 2007 and held a 50%, 30% and 20% equity interest in Jiangxi Desun, respectively, until the restructuring described below.

On November 10, 2006, Yan Sang Hui and Xiafang Chen established Paker, a holding company incorporated in Hong Kong, on behalf of Xiande Li, Xianhua Li and Kangping Chen to facilitate investments by foreign financial investors in us and to gain access to the international capital markets so as to achieve such investors’ investment goals and exit and liquidity strategies. Later, through a series of share allotments and equity transfers, Xiande Li, Xianhua Li and Kangping Chen became the only three holders of equity interests in Paker as of June 14, 2007 and held a 50%, 20% and 30% equity interest in Paker, respectively, until May 30, 2008, when Paker issued series A redeemable convertible preferred shares as described below.

On December 13, 2006, Paker established Jiangxi Jinko, one of our current operating subsidiaries in China, as its wholly-owned operating subsidiary. Jiangxi Jinko is engaged in the processing of recoverable silicon materials and the manufacturing of silicon ingots and wafers. Jiangxi Jinko commenced commercial operation in

 

63


Table of Contents

January 2007. On July 16, 2007, Jiangxi Jinko established Xinwei, with an unrelated PRC citizen, Mr. Shaoqin Pan, as a limited liability company under the PRC law. Xinwei manufactures crucibles used in the manufacturing of monocrystalline ingots. Jiangxi Jinko and Mr. Shaoqin Pan held a 60% and 40% equity interest in Xinwei, respectively. Xinwei ceased to be Jiangxi Jinko’s subsidiary after Jiangxi Jinko sold its equity interest in Xinwei to an unrelated third-party purchaser on December 28, 2007.

On June 26, 2009, Paker acquired 25% of the equity interest in Zhejiang Jinko for a total consideration of US$2.5 million from Green Power Technology Inc., a company incorporated in Mauritius, and New Energy International Ltd., a U.S. company. On June 30, 2009, Jiangxi Jinko acquired 75% of the equity interest in Zhejiang Jinko for a total consideration of approximately RMB82.9 million from Haining Chaoda Warp Knitting Co., Ltd. Prior to our acquisition, Zhejiang Jinko’s equity interests were held 75% by a PRC limited liability company and 25% by non-PRC entities. As such, Zhejiang Jinko was a Sino-foreign equity joint venture company under PRC law. Sino-foreign equity joint ventures established prior to March 16, 2007 enjoy certain tax preferential treatment under PRC law. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Selected Statement of Operations Items — Taxation”. In order to preserve Zhejiang Jinko’s status as a Sino-foreign equity joint venture eligible for such tax preferential treatment, and to avoid the necessity of obtaining the approvals that would be required to change such status, we implemented the acquisition of Zhejiang Jinko’s equity interests in the manner described above. Consequently, Zhejiang Jinko became our wholly-owned subsidiary. Zhejiang Jinko commenced manufacturing solar cells in June 2007 and was one of our largest silicon wafer customers before the acquisition. We commenced production of solar cells in July 2009 following our acquisition of Zhejiang Jinko.

On November 25, 2009, in order to facilitate settlement of payments and our overseas sales and marketing efforts, as well as to establish our presence in major overseas markets, Paker established JinkoSolar International Limited, a trading company incorporated in Hong Kong, which is an international commercial and financial center with easy access to overseas markets.

On December 24, 2009, Jiangxi Jinko and Xiande Li established Jinko Import and Export, which subsequently became Jiangxi Jinko’s wholly-owned subsidiary before Xiande Li made any capital contribution to Jinko Import and Export. In addition to conducting sales, Jinko Import and Export coordinates our sales activities with production at our operating subsidiaries and facilitates our import and export activities in the PRC.

On April 1, 2010, Paker established JinkoSolar GmbH, a limited liability company incorporated in Germany to establish a presence in Europe, expand our sales and marketing network and increase our brand recognition in strategic markets within the region.

Our Domestic Restructuring

We undertook a restructuring in 2007, or the 2007 Restructuring, with a view to establishing an offshore holding company structure to facilitate investment by foreign investors in our PRC operating business indirectly through Paker. The holders of our series A redeemable convertible preferred shares and series B redeemable convertible preferred shares initially purchased shares in Paker, prior to our offshore reorganization, as discussed below. The reasons for choosing to establish Paker in Hong Kong included:

 

   

the potential advantages of a Hong Kong holding company offered under PRC and Hong Kong laws and regulations such as (i) tax regulations relating to dividend withholding and (ii) certain reciprocal incentives for PRC businesses under Hong Kong law and for Hong Kong businesses under PRC law;

 

   

the founders’ then-current intention to explore using Paker as an export platform for our prospective overseas sales and marketing efforts;

 

   

the generally simple corporate tax regime existing under Hong Kong laws and regulations; and

 

   

the accessibility, proximity and familiarity of Hong Kong for the founders and management team from the point of view of commercial customs and similar factors.

 

64


Table of Contents

Subsequently, in preparation for this offering and the listing of our shares on NYSE, our shareholders decided to establish our company in the Cayman Islands as the holding company of Paker. As a Cayman Islands company, our shares can be readily listed on NYSE, providing the desired liquidity for our shareholders.

Pursuant to the 2007 Restructuring, Paker subscribed for the newly issued equity interest in Jiangxi Desun and became a holder of a 34.9% equity interest in Jiangxi Desun, with the approval of the Foreign Trade and Economic Cooperation Department of Jiangxi Province, or Jiangxi MOFCOM, on February 28, 2007. The equity interest of Jiangxi Desun held by Paker was subsequently diluted to 27.0% as the result of subscription of Jiangxi Desun’s newly issued equity interest by Xiande Li, Kangping Chen, Xianhua Li and Paker on April 29, 2007. As part of the 2007 Restructuring, Paker, Xiande Li, Kangping Chen and Xianhua Li entered into a share pledge agreement on February 27, 2007, or the 2007 Share Pledge Agreement, pursuant to which Xiande Li, Kangping Chen and Xianhua Li pledged their equity interest in Jiangxi Desun to Paker and waived all their voting rights and other beneficial rights with regard to their equity interest in Jiangxi Desun. As a result of the 2007 Share Pledge Agreement, Paker obtained 100% of the voting control over and economic interest in Jiangxi Desun although it did not obtain legal ownership of the equity interest pledged by Xiande Li, Kangping Chen and Xianhua Li. In December 2008, Jiangxi Desun distributed after-tax profit in an amount of RMB57.8 million to Paker under the terms of the 2007 Share Pledge Agreement. See “Related Party Transactions.” Xiande Li, Kangping Chen and Xianhua Li continue to retain ownership of the equity interest of Jiangxi Desun.

Based on the evolving interpretation of existing PRC regulations relating to the acquisition by foreign companies of PRC domestic companies, we determined that the acquisition of the equity interest in Jiangxi Desun by Paker in the 2007 Restructuring would be subject to Article 11 of “Provisions Regarding Mergers and Acquisitions of Domestic Enterprises by Foreign Investors”, or Circular 10, and therefore subject to the approval of China Ministry of Commerce, or MOFCOM at the central government level.

To remedy this past non-compliance with Circular 10 in connection with the 2007 Restructuring, we undertook another restructuring in 2008, or the 2008 Restructuring. Under the 2008 Restructuring, Paker terminated the 2007 Share Pledge Agreement on July 28, 2008, and sold all of its equity interest in Jiangxi Desun, which ceased its solar power business in June 2008, to Long Faith, an unrelated Hong Kong company, on July 28, 2008. In addition, we inquired of Jiangxi MOFCOM in November 2008 regarding the possible adverse effect, if any, that the past non-compliance in connection with the 2007 Restructuring may have on us. On November 11, 2008, Jiangxi MOFCOM confirmed in its written reply to us that there had been no modification to the former approvals for the 2007 Restructuring and Paker’s transfer of its equity interest in Jiangxi Desun to Long Faith, and we might continue to rely on those approvals for further transactions. Our PRC counsel, Chen & Co. Law Firm, has advised us that, based on their understanding of current PRC laws and regulations and the confirmation in Jiangxi MOFCOM’s written reply and because Paker has transferred all of its equity interest in Jiangxi Desun to Long Faith and has terminated the share pledge and duly completed all relevant approval and registration procedures for such transfer and termination, the possibility for the approval relating to the 2007 Restructuring to be revoked is remote and our corporate structure currently complies in all respects with Circular 10.

In addition, as part of the 2008 Restructuring, and in order to ensure the continuity of our business after the disposal of our equity interest in Jiangxi Desun, Jiangxi Jinko and Jiangxi Desun entered into certain transactions, or the 2008 Restructuring Transactions, including: (i) a ten-year leasing agreement dated January 1, 2008, pursuant to which Jiangxi Jinko leased approximately 15,282 square meters of factory buildings and office space from Jiangxi Desun; (ii) a sales agreement, pursuant to which Jiangxi Desun sold its major equipment, including 16 monocrystalline furnaces, to Universal Xiao Shan, an unrelated third-party; (iii) a capital leasing agreement, pursuant to which Jiangxi Jinko leased from Universal Xiao Shan manufacturing equipment, including the 16 monocrystalline furnaces from August 3, 2008 to May 3, 2010, which Universal Xiao Shan purchased from Jiangxi Desun; (iv) the transfer of outstanding rights and obligations of Jiangxi Desun under the then existing contracts with Jiangxi Desun’s customers to Jiangxi Jinko for the sale of recovered silicon materials, monocrystalline ingots and monocrystalline wafers; and (v) a non-competition agreement between

 

65


Table of Contents

Jiangxi Desun and Jiangxi Jinko, pursuant to which Jiangxi Desun agreed not to, directly or indirectly, conduct or invest in any company that conducts any business similar to or competitive with that which Jiangxi Jinko currently operates, from July 31, 2008. See “Risk Factors — Risks Related to Doing Business in China — If we were required to obtain the prior approval of the PRC Ministry of Commerce, or MOFCOM, for or in connection with our corporate restructuring in 2007 and 2008, our failure to do so could have a material adverse effect on our business, operating results and trading price of our ADSs” and “Risk Factors — Risks Related to Doing Business in China — If we were required to obtain the prior approval of the China Securities Regulatory Commission, or CSRC, for or in connection with this offering and the listing of our ADSs on the NYSE, our failure to do so could cause the offering to be delayed or cancelled.”

Private Equity and Other Financing Arrangements

 

   

On May 30, 2008, Paker increased its authorized number of shares by effecting a share split of 1 for 1,000 shares for its ordinary shares. As a result, the total outstanding number of shares increased from 400 to 400,000. In addition, Paker effected a share split in the form of a stock dividend of 600,000 ordinary shares at par value of HK$0.001 to Xiande Li, Kangping Chen and Xianhua Li on a pro rata basis. Therefore, immediately after completion of the share split, Paker’s authorized number of shares increased to 10,000,000 shares with par value of HK$0.001, with an aggregate of 1,000,000 outstanding ordinary shares.

 

   

On May 30, 2008, Paker issued 67,263 and 40,240 series A redeemable convertible preferred shares, representing 5.99% and 3.59% of the total share capital of Paker on an as-converted fully diluted basis, to Flagship and Everbest, respectively, for an aggregate consideration of US$24.0 million. In addition, on May 30, 2008, Paker also issued 14,629 ordinary shares, representing 1.30% of the total share capital of Paker, to Wealth Plan in consideration for its consultancy services related to Paker’s issuance of series A redeemable convertible preferred shares.

 

   

On September 18, 2008, Paker issued 55,811, 21,140, 29,597, 12,684 and 29,597 series B redeemable convertible preferred shares, representing 4.39%, 1.66%, 2.33%, 1.00% and 2.33% of the total share capital of Paker on an as-converted fully diluted basis to SCGC, CIVC, Pitango, TDR and New Goldensea, respectively, for an aggregate consideration of US$35.2 million.

Offshore Reorganization

On August 3, 2007, Greencastle International Limited, or Greencastle, was incorporated under the laws of the Cayman Islands by Offshore Incorporation (Cayman) Limited, a company incorporated in the Cayman Islands. On December 4, 2007 Wholly Globe Investments Limited, or Wholly Globe, a company incorporated in the British Virgin Islands, became Greencastle’s sole shareholder. Wholly Globe was owned by three companies incorporated in the British Virgin Islands: Brilliant, Yale Pride, and Peaky. Brilliant was owned by Xiande Li, Yale Pride was owned by Kangping Chen and Peaky was owned by Xianhua Li. In order to simplify our corporate structure, establish our holding company in the Cayman Islands, whose shares can be readily listed on an established securities exchange, and adjust our shareholdings to the agreed proportions of our shareholders, we undertook an offshore reorganization from October to December in 2008. On October 17, 2008, Wholly Globe distributed 25,000, 15,000 and 10,000 ordinary shares of Greencastle to Brilliant, Yale Pride and Peaky, respectively, which together constituted 100% of the issued and outstanding share capital of Greencastle as of the same date. As a result, Wholly Globe ceased to be a shareholder of Greencastle as of October 17, 2008. On October 21, 2008, Greencastle changed its name to JinkoSolar Holding Co., Ltd. On December 16, 2008, we repurchased 24,999, 14,999, and 9,999 ordinary shares from Brilliant, Yale Pride and Peaky, respectively and reduced our share capital from US$50,000 before the repurchase to US$10,000. Subsequently, we subdivided our share capital into 10,000,000 shares, consisting of 9,743,668 ordinary shares, 107,503 series A redeemable convertible preferred shares and 148,829 series B redeemable convertible preferred shares, each at par value of US$0.001 per share. As a result of the share subdivision, each share held by Brilliant, Yale Pride and Peaky was subdivided into 1,000 ordinary shares at par value of US$0.001 per share.

 

66


Table of Contents

In addition, on December 16, 2008 and after the share subdivision described above we undertook a series of share exchange transactions consisting of:

 

   

the 500,000 ordinary shares, 300,000 ordinary shares and 200,000 ordinary shares in Paker held by Xiande Li, Kangping Chen and Xianhua Li respectively, in exchange for 499,000, 299,000 and 199,000 of our ordinary shares;

 

   

the 14,629 ordinary shares in Paker held by Wealth Plan in exchange for 14,629 of our ordinary shares;

 

   

the 67,263 shares and 40,240 shares of series A redeemable convertible preferred shares of Paker held by Flagship and Everbest, respectively, in exchange for an equivalent number of JinkoSolar’s newly issued shares of the same class; and

 

   

the 55,811 shares, 21,140 shares, 29,597 shares, 12,684 shares and 29,597 shares of series B redeemable convertible preferred shares of Paker held by SCGC, CIVC, Pitango, TDR and New Goldensea, respectively, in exchange for an equivalent number of JinkoSolar’s newly issued shares of the same class.

Xiande Li, Kangping Chen and Xianhua Li subsequently transferred 499,000, 299,000 and 199,000 ordinary shares to Brilliant, Yale Pride and Peaky respectively on December 16, 2008. JinkoSolar was registered as the sole shareholder of Paker on February 9, 2009. Immediately before the completion of this offering, each of Brilliant, Yale Pride and Peaky will become wholly owned by HSBC International Trustee Limited in its capacity as trustee, with each of Brilliant, Yale Pride and Peaky being held under a separate irrevocable trust constituted under the laws of the Cayman Islands.

2009 Share Split

On September 15, 2009, we effected the 2009 Share Split, pursuant to which each of the ordinary shares, series A redeemable convertible preferred shares and series B redeemable convertible preferred shares was subdivided into 50 shares of the relevant class.

On September 15, 2009, Xiande Li, Kangping Chen and Xianhua Li, through Brilliant, Yale Pride and Peaky, respectively, ratably transferred an aggregate of 3,812,900 ordinary shares to the holders of series B redeemable convertible preferred shares and 701,550 ordinary shares to Flagship. For a discussion of our current shareholding structure, see “Principal Shareholders.”

Variable Interest Entities

We determined that Tiansheng, Hexing, Yangfan and Alvagen were VIEs and that we were the primary beneficiary of these four entities for the respective periods from June 6, 2006 to September 30, 2008, September 3, 2007 to September 30, 2008, June 6, 2006 to September 1, 2008 and April 29, 2007 to September 1, 2008 because, for the respective periods, (i) the equity holders of these VIEs did not have sufficient equity to carry out the business activities without our financial support, (ii) the business activities of the four entities were conducted solely or predominantly on our behalf, and (iii) through our pricing arrangements with these entities, we effectively obtained their economic benefits and absorbed their residual losses. Consequently, we consolidated their financial results for the respective periods. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Critical Accounting Policies.”

The following sets out certain information regarding the establishment of each of the VIEs:

 

   

Tiansheng.  Tiansheng was established on December 3, 2004 by PRC individuals unrelated to us. On December 18, 2006, Mr. Kangping Chen purchased all the equity shares of Tiansheng and became the sole shareholder of Tiansheng. On November 27, 2007, Mr. Chen sold his interest in Tiansheng to a PRC individual unrelated to us. Tiansheng is engaged in the trading of recoverable silicon materials.

 

   

Hexing.  Hexing was established on September 3, 2007 by two PRC individuals, one of which is our former employee and the other is unrelated to us. From November 2007 to September 2008, through a

 

67


Table of Contents
 

series of equity transfers, Hexing became a sino-foreign joint venture company with one of its founders holding 55.6% and Shine Billion Corporation Limited, a Hong Kong company, holding the remaining 44.4% of its equity interest. Hexing is engaged in the business of screening recoverable silicon materials.

 

   

Yangfan.  Yangfan was established on April 24, 2006 by two PRC individuals, one of which is our former employee and the other is unrelated to us. Yangfan procured and sold raw materials for manufacturing to Jiangxi Desun. On January 23, 2008, the shareholders of Yangfan transferred all their equity interest in Yangfan to a PRC citizen unrelated to us. Yangfan was engaged in the trading of recoverable silicon materials prior to May 2008.

 

   

Alvagen.  Alvagen was established on April 29, 2007 by Ms. Xiafang Chen, a PRC individual who is a sister of Mr. Kangping Chen and wife of Xiande Li. Alvagen primarily provided administrative support services to us.

As discussed below under “— Historical Transactions with VIEs”, we entered into supply contracts with Tiansheng, Hexing and Yangfan with a view to securing a stable supply of recoverable silicon materials, an essential source of our raw materials. We do not and did not own any equity interest in any of the VIEs. We provided financial support to the VIEs given that they were thinly capitalized. Moreover, we were the sole or predominant customer of Tiansheng, Hexing and Yangfan and were able to purchase the entire output of these VIEs at cost plus a small margin, which was generally below prevailing market prices. Pricing decisions were primarily influenced by our management. We also provided experienced management personnel to assist these VIEs in the screening and inspection of recoverable silicon materials, and in negotiation of the purchase prices. As a result, we absorbed the losses incurred by the VIEs. All these factors made us the primary beneficiary of the activities of these VIEs for the relevant periods.

Alvagen provided us with certain administrative support services from May 2007 to August 2008 and as a consequence, Alvagen bore certain general and administrative expenses on our behalf. We have determined that we were the primary beneficiary of Alvagen during the relevant periods.

On September 1, 2008, we entered into a cooperation termination agreement with Alvagen that terminated all business relationships with it and released all claims that either party may have. On September 1, 2008, Yangfan issued a letter of confirmation to confirm that it will not have any business relationship with us as Yangfan ceased its recoverable silicon material business in May 2008. Accordingly, we have determined that we were no longer the primary beneficiary of Yangfan and Alvagen as of September 1, 2008, and as a result, we were no longer required to consolidate their financial results with ours as of the same date.

As discussed below under “— Relationships with Hexing and Tiansheng”, we have entered into substantially revised agreements with Hexing to place the relationship between Hexing and us on ordinary commercial terms and terminated our relationship with Tiansheng when it became the supplier of Hexing. In addition, as of September 30, 2008, Tiansheng and Hexing had obtained additional capital injections from their equity owners, which enabled them to carry sufficient equity at risk to finance future operational activities without additional subordinated financial support from us. Accordingly, we have determined that Tiansheng and Hexing were no longer VIEs as of September 30, 2008, and as a result, we were no longer required to consolidate their financial results with ours as of the same date.

Historical Transactions with VIEs

Raw material purchase transactions with Yangfan.  During 2006, 2007 and 2008, we purchased recoverable silicon materials from Yangfan. Such purchases were made at prices determined at cost plus a small margin, and the price decisions were primarily influenced by our management, which resulted in our obtaining Yangfan’s economic benefits and our absorption of Yangfan’s losses. At the same time, we provided technical personnel to Yangfan to assist it in inspecting and screening the materials for quality and suitability for our production processes, and negotiating the purchase prices with their suppliers. Yangfan procured recoverable silicon

 

68


Table of Contents

materials from various trading companies and individuals in China. In May 2008, Yangfan phased out its recoverable silicon material procurement and sales operations and terminated its business with us on September 1, 2008.

Raw material purchase transactions with Tiansheng and Hexing.  We purchased recoverable silicon materials directly from Tiansheng prior to September 2007. Commencing in September 2007, we purchased recoverable silicon materials from Hexing which Hexing sourced from Tiansheng and other suppliers, then screened and delivered to us. Tiansheng procures recoverable silicon materials from various trading companies, individuals and other suppliers in China.

Our purchase prices from Tiansheng and Hexing were determined at cost plus a small margin, and the price decisions were primarily influenced by our management, which resulted in our absorption of their losses. We purchased recoverable silicon materials from Hexing with an aggregate amount of RMB1,011.9 million during the period from Hexing’s establishment on September 3, 2007 to September 30, 2008 when Hexing was deconsolidated. The balance of prepayments to Hexing as of September 30, 2008 was RMB60.0 million.

In addition, we provided technical personnel to Tiansheng and Hexing to assist them in inspecting and screening recoverable silicon materials for quality and suitability for our production processes, as well as in negotiating the purchase prices with their suppliers.

Premises leasing transactions.  Historically, Hexing leased factory space from us for its recoverable silicon material screening operations and paid us lease payments of RMB240,000 from September 2007 to August 2008, when the lease agreement was terminated. Hexing subsequently leased factory space for its operations from third parties. Tiansheng did not operate in our facilities and since September 1, 2008, it has operated in the facilities leased by Hexing.

Transactions with Alvagen.  From May 2007 to January 2008, Alvagen provided us with administrative support services and we used the premises of Alvagen as an administrative office to conduct our daily business and management activities in Shanghai. After January 2008, Alvagen provided us with limited administrative support services. As a consequence, Alvagen bore certain general and administrative expenses on our behalf.

Termination of Business Relationships with Yangfan and Alvagen

Yangfan terminated its recoverable silicon material procurement and sales operations in May 2008. Alvagen had ceased to provide us with limited administrative support services as of September 1, 2008. Further, on September 1, 2008, we entered into a cooperation termination agreement with Alvagen that terminates all business relationships and releases all claims that either party may have. On September 1, 2008, Yangfan issued a letter of confirmation to confirm that it will not have any business relationship with us.

Accordingly, we have determined that, as of September 1, 2008, we were no longer the primary beneficiary of Yangfan and Alvagen and as such, we were no longer required to consolidate their financial results with ours as of the same date.

Relationships with Hexing and Tiansheng

As of September 30, 2008, we had entered into substantially revised agreements with Hexing to place our relationship with Hexing on ordinary commercial terms. This change enables us to better manage potential risks that might have arisen if we were required to continue to consolidate the results of Hexing, an entity in which we do not hold legal ownership, pursue our strategy of diversifying our sources of recoverable silicon materials while maintaining our strong and stable relationships with Hexing as our supplier, and focus our business and financial resources on our core manufacturing process and technologies.

 

69


Table of Contents
   

Capitalization of Hexing and Tiansheng.  The shareholders of each of Hexing and Tiansheng have increased the registered share capital to amounts that they consider sufficient to finance their respective activities of Hexing and Tiansheng without recourse to additional financing from us. Furthermore, other than prepayments based on ordinary commercial terms, we have ceased to provide any financial support to Hexing and Tiansheng since September 2008.

 

   

Supply agreements.  Commencing from September 2008, we negotiated the price arrangements with Hexing based on market prices and ordinary commercial terms. We also amended our supply agreement with Hexing for 2009 to provide that Hexing would sell us a specified amount of recoverable silicon materials, which would be subject to adjustment at our reasonable request, at prices to be determined by the two sides on an arm’s-length basis. The purchase prices would be determined through negotiation based on prevailing market prices with a view to establishing transactions on ordinary commercial terms. We did not renew this agreement when it expired at the end of 2009.

 

   

Independent management.  Each of Hexing and Tiansheng has formed its own fully independent management team to manage transactions with their customers and suppliers, as well as daily operations. We entered into a memorandum on independent management with each of Hexing and Tiansheng on September 1, 2008 stating that we and our employees will no longer provide any management services, financial support or assistance in screening recoverable silicon materials or negotiating purchase prices with their suppliers.

As the result of the foregoing, we have determined that Hexing and Tiansheng were no longer VIEs as of September 30, 2008, and we were no longer required to consolidate their financial results with ours as of the same date.

 

70


Table of Contents

SELECTED CONSOLIDATED FINANCIAL AND OPERATING DATA

The following selected consolidated statements of operations data and other consolidated financial and operating data for the period from June 6, 2006 to December 31, 2006 and consolidated balance sheet data as of December 31, 2006 and 2007 have been derived from our audited consolidated financial statements not included in this prospectus. The following selected consolidated statements of operations data and other consolidated financial and operating data for the years ended December 31, 2007, 2008 and 2009 and the consolidated balance sheet data as of December 31, 2008 and 2009 have been derived from our audited consolidated financial statements, which are included elsewhere in this prospectus. Our audited consolidated financial statements have been prepared and presented in accordance with U.S. GAAP and have been audited by PricewaterhouseCoopers Zhong Tian CPAs Limited Company, an independent registered public accounting firm.

You should read the selected consolidated financial and operating data in conjunction with our consolidated financial statements and related notes and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included elsewhere in this prospectus. Our historical results do not necessarily indicate our expected results for any future periods. We have determined that we were no longer the primary beneficiary of Yangfan and Alvagen as of September 1, 2008 and Tiansheng and Hexing were no longer VIEs as of September 30, 2008. As a result, we were no longer required to consolidate their financial results with ours as of September 1, 2008 and September 30, 2008, respectively.

 

    For the Period
from
June 6, 2006
to
December 31,
    For the Year Ended December 31,  
    2006     2007     2008     2009     2009  
    (RMB)     (RMB)     (RMB)     (RMB)     (US$)  
    (in thousands, except share and per share data)  

Consolidated Statements of Operations Data:

         

Revenues

  116,234.2      709,152.9      2,183,614.1      1,567,859.6      229,692.7   

Cost of revenues

  (115,770.9   (621,024.0   (1,872,088.6   (1,337,647.5   (195,966.5

Gross profit

  463.3      88,128.9      311,525.5      230,212.1      33,726.2   

Total operating expenses

  (1,872.5   (12,540.3   (40,271.7   (107,739.5   (15,783.9

(Loss)/Income from operations

  (1,409.2   75,588.6      271,253.8      122,472.6      17,942.3   

Interest income/(expenses), net

  7.0      (321.9   (6,323.9   (29,936.8   (4,385.8

Subsidy income

       546.8      637.3      8,569.1      1,255.4   

Investment (loss)/gain

            (10,165.5   82.1      12.0   

Exchange loss

  (1.1   (68.0   (4,979.8   (2,181.5   (319.6

Other income/(expenses), net

  33.4      300.0      (490.1   (1,338.6   (196.1

Change in fair value of derivatives

            (29,812.7   (13,599.3   (1,992.3

(Loss)/Income before income taxes

  (1,369.9   76,045.5      220,119.1      84,067.6      12,315.9   

Income taxes

            (822.3   1,342.0      196.6   

Net (loss)/income

  (1,369.9   76,045.5      219,296.8      85,409.6      12,512.5   

Less: Net income attributable to the non-controlling interests

            (576.8          

Net (loss)/income attributable to JinkoSolar Holding Co., Ltd.

  (1,369.9   76,045.5      218,720.0      85,409.6      12,512.5   

Net (loss)/income attributable to JinkoSolar Holding Co., Ltd’s ordinary shareholders per share
basic and diluted

  (0.11   2.19      3.52      (0.73   (0.11

Net (loss)/income attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders per ADS(1)
basic and diluted

  (0.44   8.77      14.10      (2.93   (0.43

Weighted average ordinary shares outstanding basic and diluted

  12,500,000      34,691,800      50,429,700      50,731,450      50,731,450   

 

(1)   Each ADS represents four ordinary shares

 

71


Table of Contents
    As of December 31,
    2006   2007   2008   2009   2009
    (RMB)   (RMB)   (RMB)   (RMB)   (US$)
    (in thousands)

Consolidated Balance Sheets Data:

         

Cash and cash equivalent

  8,508.0   27,242.2   27,323.6   152,479.6   22,338.4

Restricted cash

      9,622.0   72,827.2   10,669.2

Accounts receivable — a related party

      69,062.1   100.4   14.7

Accounts receivable — third parties

    228.4   8,039.5   236,796.6   34,690.9

Advance to suppliers

  39,776.5   151,455.7   110,638.3   93,324.1   13,672.1

Inventories

  11,376.3   172,134.9   272,030.5   245,192.4   35,920.9

Total current assets

  66,174.1   398,470.1   528,980.4   970,650.4   142,201.1

Property, plant and equipment, net

  9,778.1   57,479.4   352,929.5   741,481.4   108,627.6

Land use rights, net

  1,810.9   6,962.0   165,509.6   228,377.5   33,457.5

Advances to suppliers to be utilized beyond one year

      187,270.6   230,899.5   33,827.0

Total assets

  77,763.1   559,279.8   1,278,020.4   2,242,649.3   328,550.0

Accounts payable

  844.9   8,721.3   23,985.3   99,932.8   14,640.2

Notes payable

        81,643.2   11,960.8

Advance from a related party

  49,810.6   92,433.3      

Advance from third party customers

    162,001.8   184,749.0   36,777.8   5,388.0

Derivative liabilities

      30,017.4   54.9   8.0

Short-term borrowings from third parties

  1,000.0   22,990.0   150,000.0   576,084.0   84,396.8

Total current liabilities

  66,115.5   310,922.2   481,330.6   946,782.3   138,704.4

Long-term borrowings

        348,750.0   51,092.2

Total liabilities

  66,115.5   372,585.9   485,043.7   1,299,811.8   190,423.5

Series A redeemable convertible preferred shares

      157,224.9   189,057.9   27,697.1

Series B redeemable convertible preferred shares

      245,402.2   287,703.8   42,148.8

Total JinkoSolar Holding Co., Ltd. shareholders’ equity

  5,707.6   175,753.9   390,349.6   466,075.8   68,280.5

Non-controlling interests

  5,940.1   10,940.1      

Total liabilities and equity

  77,763.1   559,279.8   1,278,020.4   2,242,649.3   328,550.0

The following tables set forth certain other financial and operating data of our company for the periods since we commenced our operation on June 6, 2006. Gross margin, operating margin and net margin represent the gross profit, (loss)/income from operations and net (loss)/income as a percentage of our revenues, respectively.

 

     For the
Period from
June 6,
2006 to
December 31,
    For the Year Ended December 31,  
     2006     2007     2008     2009  
     (RMB in thousands, except percentages)  

Other Financial Data:

        

Gross margin

   0.4   12.4   14.3   14.7

Operating margin

   (1.2 %)    10.7   12.4   8.0

Net margin

   (1.2 %)    10.7   10.0   5.6

Total revenues:

        

Sales of recovered silicon materials

   116,234.2      536,755.2      902,249.0      28,039.4   

Sales of silicon ingots

        170,007.2      483,544.9      98.9   

Sales of silicon wafers

             794,860.1      1,102,232.8   

Sales of solar cells

                  225,866.3   

Sales of solar modules

                  182,015.1   

Processing service fees

        2,390.5      2,960.1      29,607.1   

 

72


Table of Contents
    For the
Period from
June 6,
2006 to
December 31,
   For the Year Ended
December 31,
 
    2006    2007    2008    2009  

Operating Data:

          

Sales volume:

          

Recovered silicon materials (metric tons)

  128.3    349.1    397.9    11.7   

Silicon ingots (MW)

     12.6    33.1    0.01   

Silicon wafers (MW)

        51.4    180.4   

Solar cells (MW)

           27.3   

Solar modules (MW)

           14.4   

Average selling price (RMB):

          

Recovered silicon materials (per kilogram)

  906.0    1,537.5    2,267.5    2,397.1 (1) 

Silicon ingot (per watt)

     13.5    14.6    6.8   

Silicon wafer (per watt)

        15.5    6.1   

Solar cells (per watt)

           8.3   

Solar modules (per watt)

           12.7   

 

(1)   Sales were contracted in 2008 prior to the significant decrease in selling price and made in the first quarter of 2009.

 

73


Table of Contents

RECENT DEVELOPMENTS

The following tables set forth our condensed consolidated balance sheet information as of December 31, 2009 and our unaudited condensed consolidated balance sheet information as of March 31, 2010, and our unaudited condensed consolidated statements of operations information for the three months ended December 31, 2009 and March 31, 2010, respectively. We have prepared the unaudited condensed consolidated financial information on the same basis as our audited consolidated financial statements. This unaudited condensed consolidated financial information reflects all adjustments, consisting only of normal and recurring adjustments, which we consider necessary for a fair presentation of our financial position and operating results for the periods presented. Our financial results for the three months ended March 31, 2010 may not be indicative of our full year results for 2010 or any future interim periods. Please refer to “Risk Factors — Risks Related to Our Business and Our Industry — Our operating results may fluctuate from period to period in the future” and “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Principal Factors Affecting Our Results of Operations — Industry Demand for Solar Power Products” and “— Selected Quarterly Results of Operations” included elsewhere in this prospectus for information regarding trends and other factors that may affect our results of operations.

 

     For the Three Months Ended  
     December  31,
2009

(RMB)
(unaudited)
    March 31,
2010

(RMB)
(unaudited)
 
     (in thousands, except share
and per share data)
 

Consolidated Statements of Operations Data:

    

Revenues

   687,831.5      548,867.7   

Cost of revenues

   (576,103.2   (419,028.0

Gross profit

   111,728.3      129,839.7   

Total operating expenses

   (40,080.0   (32,722.9

Income from operations

   71,648.3      97,116.8   

Interest expenses, net

   (10,346.2   (11,448.1

Subsidy income

   281.5      1,176.2   

Investment gain

   82.1        

Exchange loss

   (1,514.3   (1,047.5

Other expenses, net

   (742.9   (396.5

Change in fair value of derivatives

   22,939.3      54.9   

Income before income taxes

   82,347.8      85,455.8   

Income taxes benefit/(expenses)

   1,342.0      (12,049.3

Net income attributable to JinkoSolar Holding Co., Ltd.

   83,689.8      73,406.5   

Series A redeemable convertible preferred shares accretion

   (8,537.8   (8,909.7

Series B redeemable convertible preferred shares accretion

   (11,199.6   (11,605.0

Allocation to preferred shareholders

   (10,102.2   (10,102.9

Net income attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders

   53,850.2      42,788.9   

Net income attributable to JinkoSolar Holding Co., Ltd’s ordinary shareholders per share

    

basic and diluted

   1.06      0.84   

Net income attributable to JinkoSolar Holding Co., Ltd’s ordinary shareholders per ADS(1)

    

basic and diluted

   4.24      3.36   

Weighted average ordinary shares outstanding

    

basic and diluted

   50,731,450      50,731,450   

 

(1)   Each ADS represents four ordinary shares.

 

74


Table of Contents
     As of
     December 31,
2009

(RMB)
   March 31,
2010

(RMB)
(unaudited)
     (in thousands)

Consolidated Balance Sheets Data:

     

Cash and cash equivalent

   152,479.6    159,599.6

Restricted cash

   72,827.2    94,567.4

Accounts receivable — a related party

   100.4    100.4

Accounts receivable — third parties

   236,796.6    238,860.6

Advances to suppliers

   93,324.1    159,765.2

Inventories

   245,192.4    398,026.5

Total current assets

   970,650.4    1,195,257.4

Property, plant and equipment, net

   741,481.4    814,886.1

Land use rights, net

   228,377.5    227,433.7

Advances to suppliers to be utilized beyond one year

   230,899.5    227,069.5

Total assets

   2,242,649.3    2,587,514.2

Accounts payable

   99,932.8    224,016.4

Notes payable

   81,643.2    108,763.1

Advance from third party customers

   36,777.8    62,924.2

Derivative liabilities

   54.9   

Short-term borrowings from third parties (including current portion of long-term debt)

   576,084.0    705,984.0

Total current liabilities

   946,782.3    1,238,113.4

Long-term borrowings (excluding current portion)

   348,750.0    328,875.0

Total liabilities

   1,299,811.8    1,571,279.2

Series A redeemable convertible preferred shares

   189,057.9    197,967.6

Series B redeemable convertible preferred shares

   287,703.8    299,308.9

Total JinkoSolar Holding Co., Ltd. shareholders’ equity

   466,075.8    518,958.5

Total liabilities and equity

   2,242,649.3    2,587,514.2

The following tables set forth certain other financial and operating data of our company for the three months ended December 31, 2009 and March 31, 2010, respectively. Gross margin, operating margin and net margin represent the gross profit, income from operations and net income as a percentage of our revenues, respectively.

 

     For the three months ended  
     December 31,
2009
    March 31,
2010
 
     (RMB in thousands, except
percentages)
 

Other Financial Data:

    

Gross margin

   16.2   23.7

Net margin

   12.2   13.3

Total revenues:

   687,831.5      548,867.7   

Sales of recovered silicon materials

   3.8        

Sales of silicon ingots

        0.9   

Sales of silicon wafers

   379,949.6      297,416.3   

Sales of solar cells

   136,040.8      151,806.6   

Sales of solar modules

   165,274.5      89,245.2   

Processing service fees

   6,562.8      10,398.8   

 

75


Table of Contents
     For the three months
ended
     December 31,
2009
   March 31,
2010
     (RMB in thousands,
except percentages)

Operating Data:

     

Sales volume:

     

Recovered silicon materials (metric tons)

     

Silicon ingots (MW)

     

Silicon wafers (MW)

   68.5    54.9

Solar cells (MW)

   16.3    19.2

Solar modules (MW)

   13.1    7.7

Average selling price (RMB)

     

Recovered silicon materials (per kilogram)

     

Silicon ingots (per watt)

     

Silicon wafers (per watt)

   5.5    5.4

Solar cells (per watt)

   8.3    7.9

Solar modules (per watt)

   12.6    11.6

Results of Operations for the First Quarter of 2010

Total Revenues. Total revenues decreased by 20.2% from RMB687.8 million in the fourth quarter of 2009 to RMB548.9 million in the first quarter of 2010, primarily due to a decrease in the sales of solar modules and silicon wafers, partially offset by an increase in the sales of solar cells.

Sales of solar modules decreased by 46.0% from RMB165.3 million in the fourth quarter of 2009 to RMB89.2 million in the first quarter of 2010, primarily because we did not recognize revenue during the quarter for a portion of our shipments made in the first quarter of 2010 which had not been received and accepted by the customers as of March 31, 2010.

Sales of silicon wafers decreased by 21.7% from RMB380.0 million in the fourth quarter of 2009 to RMB297.4 million in the first quarter of 2010, primarily due to an increase in the amount of silicon wafers we used for our own production of solar cells in the first quarter of 2010, which reduced the amount of silicon wafers available for sales.

Sales of solar cells increased by 11.6% from RMB136.0 million in the fourth quarter of 2009 to RMB151.8 million in the first quarter of 2010, primarily due to an increase in our production capacity of solar cells.

Cost of Revenues. Cost of revenues decreased by 27.3% from RMB576.1 million in the fourth quarter of 2009 to RMB419.0 million in the first quarter of 2010, primarily due to a decrease in the sales of silicon wafers and solar modules and a decrease in the purchase prices of silicon raw materials.

Gross Profit. Gross profit increased by 16.2% from RMB111.7 million in the fourth quarter of 2009 to RMB129.8 million in the first quarter of 2010. Gross margin increased from 16.2% in the fourth quarter of 2009 to 23.7% in the first quarter of 2010, primarily due to an increase in the vertical integration of our production process which enabled us to capture additional profit in the entire value chain by reducing the outsourcing of silicon wafers and solar cells as raw materials in our production process and the decrease in the purchase prices of silicon raw materials.

Operating Expenses. Operating expenses decreased by 18.5% from RMB40.1 million in the fourth quarter of 2009 to RMB32.7 million in the first quarter of 2010, primarily due to a decrease in our general and administrative expenses and selling and marketing expenses. Our general and administrative expenses decreased by 22.0% from RMB25.4 million in the fourth quarter of 2009 to RMB19.8 million in the first quarter of 2010 primarily because in the fourth quarter of 2009 we recorded a provision of RMB2.0 million for impairment of an advance payment in connection with the purchase of silicon ingots from a supplier and a provision of RMB2.8

 

76


Table of Contents

million for impairment of accounts receivable in connection with the sale of solar modules to a customer, whereas we did not record such provision in the first quarter of 2010. Our selling and marketing expenses decreased by 28.1% from RMB13.9 million in the fourth quarter of 2009 to RMB10.0 million in the first quarter of 2010, primarily due to a decrease in the number of overseas trade exhibitions we attended. Our research and development expenses decreased by 34.8% from RMB4.6 million in the fourth quarter of 2009 to RMB3.0 million in the first quarter of 2010, primarily due to the cost in relation to the testing of our solar cell production techniques in the fourth quarter of 2009.

Income from Operations. Income from operations increased by 35.6% from RMB71.6 million in the fourth quarter of 2009 to RMB97.1 million in the first quarter of 2010. Our operating margin increased to 17.7% in the first quarter of 2010 from 10.4% in the fourth quarter of 2009.

Interest Expense, Net. Our net interest expense increased by 10.7% from RMB10.3 million in the fourth quarter of 2009 to RMB11.4 million in the first quarter of 2010, primarily due to an increase in our average balance of borrowings.

Subsidy Income. We received government subsidy totalling RMB1.2 million in the first quarter of 2010 primarily for our expansion of production scale; whereas in the fourth quarter of 2009, we received government subsidy of RMB281,600.

Exchange Loss. We incurred foreign exchange loss of RMB1.0 million in the first quarter of 2010, primarily due to the effect of the depreciation of Euro against Renminbi on our Euro denominated accounts receivable. We incurred foreign exchange loss of RMB1.5 million in the fourth quarter of 2009, primarily due to the effect of the appreciation of Japanese Yen against Renminbi on our Japanese Yen denominated accounts payable.

Other Expenses, Net. Our net other expenses decreased by 42.9% from RMB0.7 million in the fourth quarter of 2009 to RMB0.4 million in the first quarter of 2010.

Change in Fair Value of Derivatives. We had non-cash gain in change of fair value of derivatives of RMB22.9 million in the fourth quarter of 2009 and non-cash gain in change of fair value of derivatives of RMB54,900 in the first quarter of 2010. See “Management Discussion and Analysis of Financial Condition and Results of Operations — Critical Accounting Policies — Redeemable Convertible Preferred Shares.”

Income Tax. We incurred income taxes of RMB12.0 million (US$1.8 million) in the first quarter of 2010, primarily because Jiangxi Jinko and Zhejiang Jinko were subject to income tax at 12.5% commencing on January 1, 2010. We did not have income tax expenses in the fourth quarter of 2009 because Jiangxi Jinko and Zhejiang Jinko were exempt from income tax for the year ended December 31, 2009. In addition, we had deferred tax benefits of RMB1.3 million in the fourth quarter of 2009 resulting from the provisions for inventories, accounts receivable and other receivables we made in the fourth quarter of 2009 which would be deductible in the future.

Net Income Attributable to JinkoSolar Holding Co., Ltd. As a result of the factors discussed above, our net income attributable to JinkoSolar Holding Co., Ltd. decreased by 12.3% from RMB83.7 million in the fourth quarter of 2009 to RMB73.4 million in the first quarter of 2010. Our net profit margin increased from 12.2% in the fourth quarter of 2009 to 13.3% in the first quarter of 2010.

 

77


Table of Contents

MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

You should read the following discussion and analysis of our financial condition and results of operations in conjunction with the section entitled “Selected Consolidated Financial and Operating Data” and our consolidated financial statements and related notes included elsewhere in this prospectus. The discussion in this section contains forward-looking statements that involve risks and uncertainties. Our actual results and the timing of selected events could differ materially from those anticipated in these forward-looking statements as a result of various factors, including those set forth under “Risk Factors” and elsewhere in this prospectus.

We commenced operations on June 6, 2006. The consolidated financial statements for the historical periods presented in this prospectus include the financial results of JinkoSolar and its current and former subsidiaries, which include Paker, Jiangxi Desun, Jiangxi Jinko and Xinwei, as well as the VIEs, which include Tiansheng, Hexing, Yangfan and Alvagen, for the relevant periods. In our discussion of the year ended December 31, 2007, the consolidated financial statements include the financial statements of Xinwei, a subsidiary of Jiangxi Jinko from July 16, 2007 (inception) to December 28, 2007. We have determined that we were no longer the primary beneficiary of Yangfan and Alvagen as of September 1, 2008 and Tiansheng and Hexing were no longer VIEs as of September 30, 2008, and therefore, we were no longer required to consolidate their financial results with ours as of September 1, 2008 and September 30, 2008, respectively.

Overview

We manufacture and sell monocrystalline and multicrystalline wafers, solar cells and solar modules. We have built a vertically integrated solar product value chain from recovered silicon materials to solar modules. Our product mix has evolved rapidly since our inception on June 6, 2006. In 2006, our sales consisted entirely of recovered silicon materials. In 2007, we sold a mix of recovered silicon materials and silicon ingots. In 2008, our sales consisted of silicon wafers, silicon ingots and recovered silicon materials.

We commenced producing solar cells in July 2009 following our acquisition of Zhejiang Jinko and commenced producing solar modules in August 2009. Commencing in 2009, we retained a substantial majority of our output of recovered silicon materials and silicon ingots for our own silicon wafer production to capture the efficiencies of our vertically integrated production process. Consequently, we derived a substantial majority of our revenues from sales of silicon wafers and, to a lesser degree, solar cells and solar modules in 2009. As of March 31, 2010, we had annual silicon wafer production capacity of approximately 300 MW and annual solar cell and solar module production capacity of approximately 200 MW each. We plan to increase our annual silicon wafer and solar module production capacity to approximately 500 MW each and solar cell production capacity to approximately 400 MW by the end of 2010.

Our revenues were RMB116.2 million for the period from June 6, 2006 to December 31, 2006, RMB709.2 million for the year ended December 31, 2007, RMB2,183.6 million for the year ended December 31, 2008 and RMB1,567.9 million (US$229.7 million) for year ended December 31, 2009. We recorded a net loss of RMB1.4 million for the period from June 6, 2006 to December 31, 2006, and net income of RMB76.0 million, RMB218.7 million and RMB85.4 million (US$12.5 million), respectively, for the years ended December 31, 2007, 2008 and 2009.

We have a limited operating history, which may not provide a meaningful basis to evaluate our business. You should consider the risks and difficulties frequently encountered by early-stage companies, such as us, in new and rapidly evolving markets, such as the solar power market. Historical growth in our results of operations should not be taken as indicative of the rate of growth, if any, that can be expected in the future. In addition, our limited operating history provides a limited historical basis to assess the impact that critical accounting policies may have on our business and our financial performance. Further, we historically derived a substantial portion of our revenues from sales to ReneSola, a related party. See “Risk Factors — Risks Related to Our Business and

 

78


Table of Contents

Our Industry — Our limited operating history makes it difficult to evaluate our results of operations and prospects” and “Risk Factors — Risks Related to Our Business and Our Industry — Notwithstanding our continuing efforts to further diversify our customer base, we derive, and expect to continue to derive, a significant portion of our revenues from a limited number of customers. As a result, the loss of, or a significant reduction in orders from, any of these customers would significantly reduce our revenues and harm our results of operations.”

Principal Factors Affecting Our Results of Operations

We believe that the following factors have had, and we expect that they will continue to have, a significant effect on the development of our business, financial condition and results of operations.

Industry Demand for Solar Power Products

Our business and revenue growth depends on the industry demand for solar power products. The solar power market has grown significantly in recent years. According to Solarbuzz, the world PV market, defined as relating to the total MW of modules delivered to installation sites, increased from 1,460 MW in 2005 to 7,300 MW in 2009, representing a compound annual growth rate, or CAGR, of 50%. Because installation of solar power systems can be relatively expensive, and decisions about such installations are usually elective rather than essential for businesses and consumers who have access to the public power grid, demand for solar power products is significantly affected by general economic conditions. Demand was significantly reduced during the global recession in 2008 and 2009.

In addition, demand for solar power products is significantly affected by government incentives adopted to make solar power competitive with conventional fossil fuel power. Various governments such as those of Germany, Spain, China, Japan, South Korea, Australia and the United States have used different policy initiatives to encourage or accelerate the development and adoption of solar power and other renewable energy sources. The widespread implementation of such incentive policies significantly stimulates demand for solar power products, including our products, whereas reductions or limitations on such policies, as have occurred in Germany and Spain, can reduce demand for such products or change price expectations, causing vendors of solar power products, including us, to reduce prices to adjust to demand at lower price levels. As a result, demand for and pricing of our products is highly sensitive to incentive policy decisions by governments in major markets.

Despite the contraction in demand during the second half of 2008 and the first half of 2009, we believe that demand for solar power products has recovered significantly in response to a series of factors, including the recovery of the global economy and increasing availability of financing for solar power projects. Although selling prices for solar power products, including the average selling prices of our products, have generally stabilized at levels substantially below pre-crisis prices, there is no assurance that such prices may not decline again. In addition, demand for solar power products is significantly affected by government incentives adopted to make solar power competitive with conventional fossil fuel power. The widespread implementation of such incentive policies has significantly stimulated demand, whereas reductions or limitations on such policies can reduce demand for such products. We believe that demand will continue to grow rapidly as solar power becomes an increasingly important source of renewable energy, and that the trend of government policies in support of solar power will continue to expand. Governments in such markets as Australia, China, Japan and the United States introduced significant incentive programs in 2009, whereas certain early adopters of PV incentive policies, such as Germany, Spain and South Korea announced reductions of incentive programs in 2009 and 2010. According to Solarbuzz, under the “Balanced Energy” forecast scenario, the lowest of three forecast scenarios, the world PV market is expected to reach 8,440 MW in 2010. We believe that the continued growth in demand for solar power products including our products will depend largely on the availability and effectiveness of government incentives for solar power products and the competitiveness of solar power in relation to other conventional energy resources.

 

79


Table of Contents

In addition, because demand for solar power products tends to be weaker during the winter months partly due to adverse weather conditions in certain regions, which complicates the installation of solar power systems, our quarterly operating results may fluctuate from period to period based on the seasonality of industry demand for solar power products. Our sales in the first quarter of any year may also be affected by the occurrence of the Chinese New Year holiday during which domestic industrial activity is normally lower than that at other times.

Pricing of Our Products

The prices of our products are based on a variety of factors, including our silicon raw materials costs, supply and demand conditions for solar power products, product mix, product quality and the terms of our customer contracts, including sales volumes. We previously made sales of recovered silicon materials and silicon ingots on a per-kilogram basis. We make sales of silicon wafers and solar cells on a per-piece basis and solar modules on a per-watt basis.

Since the fourth quarter of 2008, the pricing of our products has undergone a major downward adjustment. The average selling price of our silicon wafers was RMB15.5 per watt for the year ended December 31, 2008, and declined by 60.6% to RMB6.1 per watt for the year ended December 31, 2009. Average selling prices for other solar power products such as silicon ingots also declined in the same period due to weakened macroeconomic conditions, combined with the increased supply of solar power products due to production capacity expansion by solar power product manufacturers worldwide in recent years. We have adjusted to these changes by reducing selling prices to reflect market price trends. The price renegotiation benchmarks that we have agreed with customers under long-term wafer sale contracts, which are the degree of spot market price fluctuation that will give rise to renegotiation, are generally a 5% or 10% rise or fall in the spot market price. As a result, we believe that the current prices for our silicon wafers under these contracts reflect market prices. As a consequence of these trends, our revenues for the year ended December 31, 2009 were materially adversely affected. In order to mitigate as much as possible the effect of this major adjustment in the price of our products, commencing in 2009, we retained a substantial majority of our recovered silicon materials and ingots for our own silicon wafer production to capture the efficiencies of our vertically integrated production process. We have also taken the steps to reduce our costs outlined below in “Availability, Price and Mix of Our Silicon Feedstock.” As a result of these actions, we were able to operate profitably for the year ended December 31, 2009. Although the demand for our products has significantly recovered since the third quarter of 2009, the average selling prices of our products have not increased, and may decrease again. Because we are not able to reduce our fixed costs and expenses to the same degree as our variable costs, the decline in our average selling prices has had a material adverse effect on our net margins for the year ended December 31, 2009. See “Risk Factors — Risks Related to our Business and Our Industry — As polysilicon supply increases, the corresponding increase in the global supply of downstream solar power products including our products may cause substantial downward pressure on the prices of our products and reduce our revenues and earnings.”

Changing Product Mix

Our product mix has evolved rapidly since our inception, as we expanded our production capabilities to manufacture and sell downstream solar power products and to capture the efficiencies of our vertically integrated production process. In 2006, our sales consisted entirely of recovered silicon materials. In 2007, we sold recovered silicon materials and monocrystalline ingots. In 2008, our sales consisted of monocrystalline wafers and ingots, multicrystalline wafers and ingots and recovered silicon materials. Commencing in 2009, we retained a substantial majority of our output of recovered silicon materials and silicon ingots for our own production of silicon wafers. Consequently, for the year ended December 31, 2009, we derived a substantial majority of our revenues from the sale of silicon wafers. Through our acquisition of Zhejiang Jinko, we added solar cells to our product lines in July 2009. In addition, we commenced producing solar modules in August 2009 and have completed constructing our principal solar module manufacturing base for the mass-production of solar modules in Shangrao. As we have rapidly expanded our manufacturing capacities of silicon wafers, solar cells and solar modules over the past few years, the respective manufacturing capacities of each product in the value chain have

 

80


Table of Contents

not been perfectly matched. To fully capture demand for various types of solar power products, at different times during 2009 we sold silicon wafers and solar cells as end-products to certain customers, and also purchased silicon wafers and solar cells as inputs for the manufacturing of solar cells and solar modules, respectively, and sold these solar cells and solar modules as end-products. In the fourth quarter of 2009, we purchased 1.5 MW of silicon wafers and 8.6 MW of solar cells for our production of solar cells and solar modules respectively. As a result, compared to a fully-integrated maker of solar power products of comparable size with equal manufacturing capacities for silicon wafers, solar cells and solar modules, our sales and our total revenues were larger and our gross profit margin was lower as we were not able to capture the profit in the entire value chain. In future periods, our sales revenues and gross profit margin may vary as we better match our silicon wafer and solar cell capacity to our solar module capacity to become fully vertically integrated. In future periods we expect to derive a substantial majority of our revenues from sales of silicon wafers, solar cells and modules. As we build out our solar cell and solar module production capacity and achieve full-scale production of these products, we intend to use a greater portion of our silicon wafers for the production of our own solar cells and modules. However, we will continue to evaluate whether to sell silicon wafers to customers from time to time based on our silicon wafer production and market opportunities.

Although each of these products represents a separate stage of the solar power production chain, each involves different production processes, costs and selling prices. Accordingly, our historical results of operations from period to period have been significantly influenced by our changing product mix, and we expect that our operating results for future periods will continue to be influenced by our product mix.

Production Capacity Expansion

We plan to increase our annual production capacity of silicon wafer and solar modules to approximately 500 MW each and annual production capacity of solar cells to approximately 400 MW by the end of 2010. Our ability to successfully complete this production capacity expansion plan will depend on our ability to obtain required approvals and permits, as well as our ability to finance the necessary capital expenditures and other factors.

We expect our production capacity expansions will increase our revenues as our output and sales volume increase, notwithstanding the decrease in average selling prices of our products. As a consequence of our increased investment in plant and equipment and increased production scale, we expect that our costs of revenues, including depreciation and amortization costs, will increase. If we are able to maintain satisfactory facility utilization rates and productivity, our production capacity expansion will enable us to reduce our unit manufacturing costs through economies of scale, as fixed costs are allocated over a larger number of units of output. Moreover, manufacturers with greater scale are in a better position to obtain price discounts from silicon feedstock suppliers and may therefore obtain a greater market share of solar power products by selling at more competitive prices.

Our ability to achieve satisfactory utilization rates and economies of scale will depend upon a variety of factors, including our ability to attract and retain sufficient customers, the ability of our customers and suppliers to perform their obligations under our existing contracts, our ability to secure a sufficient supply of raw materials and production equipment for our production activities, the availability of working capital and the selling prices for our products.

Availability, Price and Mix of Our Silicon Feedstock

We use virgin polysilicon and recoverable silicon materials as the primary raw materials in our operations. Currently, we rely on a combination of long-term supply contracts and spot market purchases to meet our virgin polysilicon requirements. We have entered into two long-term virgin polysilicon purchase agreements under which we have agreed, after the amendments referred to below, to purchase an aggregate of 5,350 metric tons of virgin polysilicon from 2009 to 2019. Up to mid-2008, an industry-wide shortage of virgin polysilicon coupled

 

81


Table of Contents

with rapidly growing demand from the solar power industry caused rapid escalation of virgin polysilicon prices. According to Solarbuzz, the average price of virgin polysilicon under long-term supply contracts increased from approximately US$60 to US$65 per kilogram delivered in 2007 to US$60 to US$75 per kilogram delivered in 2008. Meanwhile, according to Solarbuzz, the spot price of virgin polysilicon reached as high as US$475 per kilogram during 2008. However, during the fourth quarter of 2008 and the first half of 2009, virgin polysilicon prices fell substantially as a result of significant new manufacturing capacity coming on line and falling demand for solar power products and semiconductor devices resulting from the global recession and credit market contraction. See “Our Industry — Recent Trends in Solar Power Product Prices.”

During the year ended December 31, 2007 and the first seven months of 2008, all of our purchases of virgin polysilicon were made in the spot market. Commencing in August 2008, we began to take deliveries of virgin polysilicon under our contract with Zhongcai Technological. During the year ended December 31, 2008, our spot market purchases of virgin polysilicon and contract purchases of virgin polysilicon accounted for 84.8% and 15.2%, respectively, by volume of our virgin polysilicon purchases. For the five-month period from August 2008 through December 2008, our spot market purchases of virgin polysilicon and contract purchases of virgin polysilicon accounted for 77.0% and 23.0%, respectively, by volume of our virgin polysilicon purchases. For the year ended December 31, 2009, our spot market purchases of virgin polysilicon and contract purchases of virgin polysilicon accounted for 85.4% and 14.6%, respectively, by volume of our virgin polysilicon purchases.

For the four months of August through November 2008, our contract prices with Zhongcai Technological were fixed at a discount to the prevailing spot market price at the commencement of the contract term. In December 2008, we and Zhongcai Technological negotiated a price that reflected the major downward adjustment in virgin polysilicon prices. In January 2009, we further renegotiated the terms of this contract so that prices are now set on a monthly basis with reference to trends in the spot market prices of virgin polysilicon.

The annual prices under our long-term supply contract with Hoku are fixed at declining annual prices over the contract’s nine-year term. The average of the contract prices under the supply contract with Hoku over the term of the contract is above the April 2010 spot market index price as reflected in the PCSPI. If the price of virgin polysilicon continues to decrease and we are unable either to renegotiate or otherwise adjust the purchase price or volumes or to pass our increased costs on to our customers, our profit margins, results of operations and financial condition may be materially and adversely affected. We have made substantial prepayments under the Hoku supply contract. See “Business — Suppliers — Raw Materials — Virgin Polysilicon” and “Risk Factors — Risks Related to Our Business and Industry — Hoku many not be able to complete its plant construction in a timely manner or may cease to continue as a going concern, which may have a material adverse effect on our results of operations and financial condition.”

As the shortage of virgin polysilicon has eased, spot prices have begun to converge with contract prices. According to PCSPI, the spot price of virgin polysilicon in April 2010 coincided with the contract price at US$53 per kilogram(1). Because prices of downstream solar power products, including our products, are affected by prices of virgin polysilicon, the prices of our products have been similarly affected. See “— Pricing of Our Products.”

In order to mitigate as much as possible the effect of the major downward adjustment in the cost of polysilicon and the prices of our products, we have successfully:

 

   

renegotiated the price, volume and delivery terms of our long-term virgin polysilicon supply agreements with our suppliers, reducing our purchase commitments at prices fixed at levels above declining market prices, as well as reducing or delaying our future prepayment obligations;

 

(1)   The April 2010 reference spot price is based on average spot price offered and signed from March 2010 through mid-April 2010. The April 2010 reference contract price reports the average levelized price of the contracts signed and offered from March 2010 through mid-April 2010 and with deliveries commencing in 2011 and 2012. Reference prices represent aggregated price information from numerous sources. Price ranges are approximations. Reference price and price ranges are as close to accurate as possible without revealing source-specific information.

 

82


Table of Contents
   

renegotiated the price terms of our purchases of recoverable silicon materials to reflect the reduction in the prices of virgin polysilicon; and

 

   

renegotiated the payment terms and price terms of certain of our equipment supply contracts.

In addition to using virgin polysilicon, we also utilize a significant amount of recovered silicon materials. For the years ended December 31, 2007, 2008 and 2009, virgin polysilicon accounted for approximately 1.4%, 13.0% and 48.6%, respectively, and recoverable silicon materials which we process into recovered silicon materials accounted for approximately 98.6%, 87.0% and 51.4%, respectively, of our total silicon raw material purchases by value. Because recoverable silicon materials can be used as a substitute for virgin polysilicon, prices of recoverable silicon materials, which are generally priced at a discount to virgin polysilicon, have also been influenced by the price trends affecting virgin polysilicon. Although we plan to use an increasing amount of virgin polysilicon, we expect to continue to meet a substantial portion of our silicon raw material requirements through the sourcing of recoverable silicon materials. However, our greater reliance on virgin polysilicon in the future may increase our costs compared to what such costs would have been had we maintained our historical proportions of recovered silicon materials to virgin polysilicon. See “Risk Factors — Risks Related to Our Business and Our Industry — As the import of recoverable silicon materials is subject to approvals from relevant governmental authorities, if we have to import recoverable silicon materials in the future for our silicon ingot manufacturing and we cannot obtain such approvals in a timely manner or at all, our raw material supplies may be adversely affected.”

Manufacturing Costs

Our cost of revenues consists primarily of the costs of raw materials, consumables, direct labor, utilities and depreciation. Our location in Shangrao and Haining provides us with access to low-cost labor, particularly in Shangrao. In addition, since we commenced operations in June 2006, we have focused our research and development efforts on reducing the costs at each stage of our production process. In this regard, we have:

 

   

developed the process technology to produce high-quality silicon wafers with thicknesses of a high degree of consistency and increase the number of quality conforming silicon wafers, which results in reductions in unit cost of our silicon wafers;

 

   

improved our solar cell manufacturing equipment and streamlined our production process to improve the conversion efficiency and quality of our solar cells and increase the percentage of quality conforming solar cells, which resulted in reductions in unit cost of solar cells;

 

   

strengthened our quality control and developed our manufacturing technology to increase the use life of our solar modules and the percentage of quality conforming solar modules, which resulted in reductions in unit cost of solar modules;

 

   

developed proprietary process technologies, which enable us to process a broad range of recoverable silicon materials for sale as well as for our own production, resulting in reduced unit cost of our silicon ingots and wafers; and

 

   

developed the furnace reloading process technology in our monocrystalline ingot production, which increases the size of our monocrystalline ingots by adding silicon raw materials in our furnaces during the ingot pulling stage and reduces our cost of consumables and utilities per watt of monocrystalline ingots.

We expect that our costs of revenues, including depreciation and amortization costs, will increase as a result of our increased investment in plant and equipment, increased production scale and our acquisition of Zhejiang Jinko. However, if we are able to maintain satisfactory facility utilization rates and productivity, our further vertical integration and production capacity expansion will enable us to reduce our unit manufacturing costs through economies of scale, as fixed costs are allocated over a larger number of units of output.

 

83


Table of Contents

Selected Statement of Operations Items

Revenues

Historically, we have derived revenues from the sales of recovered silicon materials, ingots, wafers, solar cells and solar modules as well as processing recoverable silicon materials and wafers for our customers. The following table presents our revenues, net of VAT, by products and services, as sales amounts and as percentages of total net revenues, for the periods indicated:

 

    For the Year Ended December 31,
    2007   2008     2009
    (RMB in
thousands)
  (%)   (RMB in
thousands)
  (%)     (RMB in
thousands)
  (US$ in
thousands)
  (%)

Revenue by products:

             

Recovered silicon materials

  536,755.2   75.7   902,249.0   41.4   28,039.4   4,107.7   1.8

Silicon ingots

  170,007.2   24.0   483,544.9   22.1      98.9   14.5   <0.1

Silicon wafers

      794,860.1   36.4      1,102,232.8   161,478.0   70.3

Solar cells

             225,866.3   33,089.6   14.4

Solar modules

             182,015.1   26,665.4   11.6

Processing services

  2,390.5   0.3   2,960.1   0.1      29,607.1   4,337.5   1.9
                             

Total

  709,152.9   100   2,183,614.1   100   1,567,859.6   229,692.7   100.0
                             

Commencing in 2009, we retained a substantial majority of our output of recovered silicon materials and silicon ingots for our own production of silicon wafers. We commenced producing solar cells in July 2009 following our acquisition of Zhejiang Jinko and commenced producing of solar modules in August 2009. Consequently, we derived a substantial majority of our revenues from sale of silicon wafers, and to a lesser degree, solar cells and solar modules in 2009. We also derive a relatively small amount of revenues from processing service fees.

Our revenues are affected by sales volumes, product mix and average selling prices. The following table sets forth, by products, our sales volumes and approximate average selling prices for the periods indicated:

 

     For the Year  Ended
December 31,
 
     2007    2008    2009      

Sales volume:

        

Recovered silicon materials (metric tons)

   349.1    397.9    11.7   

Silicon ingots (MW)

   12.6    33.1    0.01   

Silicon wafers (MW)

      51.4    180.4   

Solar cells (MW)

         27.3   

Solar modules (MW)

         14.4   

Average selling price (RMB):

        

Recovered silicon materials (per kilogram)

   1,537.5    2,267.5    2,397.1 (1) 

Silicon ingots (per watt)

   13.5    14.6    6.8   

Silicon wafers (per watt)

      15.5    6.1   

Solar cells (per watt)

         8.3   

Solar modules (per watt)

         12.7   

 

(1)   Sales were contracted in 2008 prior to the significant decrease in selling price and made in the first quarter of 2009.

Increased average selling prices of recovered silicon materials from period to period reflected the rapid escalation in prices of virgin polysilicon, driven by supply constraints in the face of growing demand from both the solar power industry and the semiconductor industry and an industry-wide silicon shortage until the end of the third quarter of 2008, when demand began to be affected by the global recession and credit market

 

84


Table of Contents

contraction. Demand for such intermediate products as silicon ingots and silicon wafers remained strong from 2007 until the end of the first half of 2008, as reflected in increases in sales volume, although average selling price increases were constrained by competitive factors.

However, from the fourth quarter of 2008 through the second quarter of 2009, both sales volumes and average selling prices of silicon wafers were seriously affected by the contraction in demand caused by global recession and credit market contraction. In response to such pressures, we renegotiated the price terms of all of our long-term silicon wafer sales contracts substantially to reduce the selling prices to reflect market price trends, or to provide that prices are to be reset at specified intervals, such as monthly. Consequently, average selling prices of silicon wafers in 2009 were lower than in 2008.

For the years ended December 31, 2007, 2008 and 2009, our gross profit amounted to RMB88.1 million, RMB311.5 million and RMB230.2 million (US$33.7 million), respectively, representing a gross margin of 12.4%, 14.3% and 14.7%, respectively. The decrease in gross profit in 2009 compared to 2008 reflects the reduction in average selling price of our silicon wafers resulting from contraction in the market demand from the fourth quarter of 2008 to the second quarter of 2009, partially offset by the upgrade in our product mix. However, we also expect that the decrease in selling prices of our products will be partially mitigated by decreasing costs of silicon raw materials, our economies of scale as we expand our production capacity and the change in our product mix to retain a substantial majority of our output of recovered silicon materials and ingots for our own silicon wafer, solar cell and solar module production.

We sell our silicon wafers under long-term sales contracts, short-term sales contracts and by spot market sales. We currently sell solar cells under short-term contracts and by spot market sales. As of the date of this prospectus, we had long-term sales contracts with four customers outstanding for the sale of an aggregate of approximately 266 MW of silicon wafers from 2010 to 2013. We may allow our silicon wafer customers flexibility in relation to the volume, timing and pricing of their orders under these long-term sales contracts on a case-by-case basis, the volumes of silicon wafers actually purchased by such customers under these contracts in any given period and the timing and amount of revenues we recognize in such period may not correspond to the terms of these contracts. In addition, we have entered into major contracts for the sale of more than 500 MW of solar modules from 2010 to 2012.

Currently, we sell our silicon wafers primarily in the PRC domestic market. We commenced sales of silicon wafers in the overseas market in May 2008, when we began exporting our products to Hong Kong, and have since sold our silicon wafers to customers in overseas market such as Hong Kong, Taiwan, the Netherlands, Germany, the United States, India, Belgium, Singapore, Korea, France, Spain and Israel. We sell a substantial portion of our solar cells and modules in the overseas markets. In line with our capacity expansion plans, we intend to increase our sales both to overseas markets, particularly in such strategic markets as Germany, Spain and the United States and domestically within China to take advantage of the new government incentives.

Cost of Revenues

Cost of revenues primarily consists of: (i) raw materials, which primarily consist of both virgin polysilicon and recoverable silicon materials, comprising the majority of our cost of revenues; (ii) consumables and components, which include crucibles for the production of monocrystalline and multicrystalline silicon ingots, steel alloy saw wires, slurry, chemicals for raw material cleaning and silicon wafer cleaning, and gases such as argon and silane and solar cells we procure from third parties for the production of solar modules; (iii) direct labor costs, which include salaries and benefits for employees directly involved in manufacturing activities; (iv) overhead costs, which consist of equipment maintenance costs, cost of utilities including electricity and water; (v) depreciation of property, plant and equipment; and (vi) processing fees paid to third party factories relating to the outsourced production of solar cells and solar modules. For the years ended December 31, 2007, 2008 and 2009, our cost of revenues was RMB621.0 million, RMB1,872.1 million and RMB1,337.6 million (US$196.0 million), respectively.

 

85


Table of Contents

Operating Expenses

Our operating expenses include selling and marketing expenses, general and administrative expenses and research and development expenses. Our operating expenses will increase as we expand our operations in the next few years.

Selling and Marketing Expenses.  Our selling and marketing expenses consist primarily of shipping and handling costs, sample costs, exhibition costs, salaries, bonuses and other benefits for our sales personnel as well as sales-related travel and entertainment expenses. For the years ended December 31, 2007, 2008 and 2009, our selling and marketing expenses were RMB1.3 million, RMB1.2 million and RMB16.7 million (US$2.5 million), respectively. We expect selling and marketing expenses to increase in the near future as we increase our selling and marketing efforts in line with our expansion into the downstream solar power products and hire additional sales personnel to accommodate the growth of our business and expansion of our customer base in the domestic and overseas markets.

General and Administrative Expenses.  General and administrative expenses consist primarily of salaries and benefits for our administrative, finance and human resources personnel, amortization of land use rights, office expenses, entertainment expenses, business travel expenses, fees and expenses of auditing and other professional services. For the years ended December 31, 2007, 2008 and 2009, our general and administrative expenses amounted to RMB11.2 million, RMB38.7 million and RMB85.1 million (US$12.5 million), respectively. For the year ended December 31, 2009, our general and administrative expenses included non-cash compensation expenses of RMB3.4 million (US$0.5 million) and RMB17.5 million (US$2.6 million) recognized as the result of the June 2009 Modification and September 2009 Modification, respectively. Such non-cash compensation expenses represent the net contribution of value to our founders, who are also our key employees, from the holders of our redeemable convertible preferred shares as a result of these modifications. These compensation expenses were non-cash charges which had no impact on our cash flows. For details of the June 2009 Modification and September 2009 Modification, see “Description of Share Capital — History of Share Issuances and Other Financings — June 2009 Modification” and “— September 2009 Modification.”

General and administrative expenses of Alvagen, which provided us with certain administrative support services from May 2007 to August 2008, accounted for 1.4% and 0.4%, respectively, of our total general and administrative expenses for the years ended December 31, 2007 and 2008. We expect general and administrative expenses to increase as we hire more personnel and incur expenses to accommodate our business expansion and to support our operation as a public company, including compliance-related expenses, and recognize share-based compensation expenses for the year ending December 31, 2010 and in subsequent periods. Since August 28, 2009, we have granted options to purchase 4,536,480 ordinary shares to certain directors, officers and employees. We will recognize share-based compensation expense upon the completion of this offering in connection with the grant of such options. See “— Share-based Compensation”.

Research and Development Expenses

Research and development expenses consist primarily of silicon materials consumed, salaries, bonuses and other benefits for research and development personnel. For the years ended December 31, 2007, 2008 and 2009, our research and development expenses were RMB50.8 thousand, RMB441.8 thousand and RMB5.9 million (US$0.9 million), respectively. We expect the research and development expenses to increase as we hire additional research and development personnel and devote more resources to research and development to improve our manufacturing processes and reduce our manufacturing costs. In particular, we intend to use a portion of the proceeds of this offering to invest in research and development to improve product quality, reduce silicon recycling losses and improve the productivity of our silicon ingot, wafer, solar cell and solar module manufacturing processes.

 

86


Table of Contents

Interest Income and Expenses

Interest income represents interest on our demand deposits. Our interest expenses consist primarily of interest expenses with respect to short-term and long-term borrowings from banks and other lenders. For the years ended December 31, 2007, 2008 and 2009, we had net interest expenses of RMB321.9 thousand, RMB6.3 million and RMB29.9 million (US$4.4 million), respectively.

Subsidy Income

From time to time we apply for and receive government incentives in the form of subsidy from local and provincial governments. These subsidies are made available for the purpose of encouraging and supporting large-scale enterprises and high technology enterprises based in the relevant location. Subsidies are available for assisting with new plant construction or expansion technology upgrades, encouraging attendance at overseas sales exhibitions, export sales and brand establishment in export markets. We record such subsidies as subsidy income. The amount of government subsidy we receive may vary from period to period and there is no assurance that we will continue to receive government subsidy in the future periods. See “Risk Factors — Risks Related to Our Business and Our Industry — Our operating results may fluctuate from period to period in the future.” Government subsidy income is recognized when it is received. For the years ended December 31, 2007, 2008 and 2009, our government subsidy income was RMB546.8 thousand, RMB637.3 thousand and RMB8.6 million (US$1.3 million), respectively.

Loss on Disposal of Subsidiary

Loss on disposal of subsidiary represents the loss we incurred in disposing of Paker’s direct investment in Jiangxi Desun in July 2008. In 2008, we incurred loss on disposal of subsidiary of RMB10.2 million from the disposal of Paker’s 27.02% equity interest in Jiangxi Desun in connection with our 2008 Restructuring.

Other Income and Expenses

Other income and expenses consist primarily of income from sales of used packaging materials and expenses relating to charitable donations. For the year ended December 31, 2007, our other income amounted to RMB300.0 thousand. For the years ended December 31, 2008 and 2009, we had net other expenses of RMB490.1 thousand and RMB1.3 million (US$0.2 million), respectively.

Change in Fair Value of Derivatives

We determined that the 2009 and 2010 performance adjustment features embedded in the series B redeemable convertible preferred shares meet the criteria for bifurcation, and accordingly these features are accounted for as derivative liabilities, with changes in fair value recorded in earnings.

The non-cash charges relating to change in fair value of derivatives embedded in the series B redeemable convertible preferred shares recognized in earnings were RMB29.8 million and RMB13.6 million (US$2.0 million) for the years ended December 31, 2008 and 2009, respectively.

Share-based Compensation

We adopted a long-term incentive plan in July 2009 and have granted options to certain of our directors, officers and employees to purchase a total of 4,536,480 our ordinary shares with the exercise price of US$2.08 per share. Of these options, the exercise price of the options for 3,024,750 our ordinary shares was originally US$3.13 per share, but was subsequently reduced to US$2.08 on April 6, 2010. We are currently in the process of evaluating the dollar impact of the modification on our results of operations. We anticipate that, as a result of the modification, upon completion of this offering, we will incur incremental share-based compensation expense which may have a material impact on our results of operations for the quarter in which this offering is completed. In addition, we agreed to grant certain of our officers and employees options to purchase 726,250 ordinary shares

 

87


Table of Contents

at an exercise price of 85% of the initial public offering price per share in January 2010, but changed the exercise price to US$2.08 per share in April 2010. The share options will generally vest in five successive equal annual installments on the last day of each year from the grant date, provided that the personnel’s service with us has not been terminated prior to each such vesting date. For one employee, the share options will vest in a series of 36 successive equal monthly installments, on the last day of each month, commencing from October 1, 2008, provided that such employee’s service with us has not terminated prior to each such vesting date. No portion of the share options, even when vested, may be exercised prior to the occurrence of our initial public offering and within the 180-day period following an effective initial public offering as defined in the plan. Share-based compensation expense for options with performance conditions is generally measured at the grant date based on the fair value of the share options and is recognized as an expense on a graded-vesting basis, net of estimated forfeitures, over the requisite service period. However, given the exercise restrictions placed on the options that we have granted since August 28, 2009, the recognition of share-based compensation expense on these options is delayed. Such expense accumulated from grant date will be recognized at the time of an effective initial public offering. We use the binominal option pricing model to determine the fair value of share options at the grant date, where the exercisability is conditional upon the occurrence of our initial public offering.

Determining the fair value of our ordinary shares requires us to make complex and subjective judgments regarding our projected financial and operating results, our unique business risks, the liquidity of our ordinary shares and our operating history and prospects at the time the grants were made.

In assessing the fair value of our ordinary shares, we considered the following principal factors:

 

   

the nature of our business and contracts and agreements relating to our business;

 

   

our financial conditions;

 

   

the economic outlook in general and the specific economic and competitive elements affecting our business;

 

   

the growth of our operations; and

 

   

our financial and business risks.

We used the income approach, employing the discounted cash flow, or DCF, method, as the primary approach, and the market approach as a cross-check to derive the fair value of our ordinary shares. We applied the DCF analysis based on our projected cash flow using management’s best estimate as of the valuation date. The income approach involves applying appropriate discount rates, based on earnings forecasts, to estimated cash flows.

The determination of the fair value of share options on the date of grant using an option-pricing model is affected by our stock price as well as assumptions regarding a number of complex and subjective variables, including our expected standard deviation of stock price over the vesting period, risk-free interest rate, expected dividend yield, and actual and projected employee share option exercise experience. Furthermore, we are required to estimate forfeitures at the time of grant and recognize share-based compensation expenses only for those awards that are expected to vest. If actual forfeitures differ from those estimates, we may need to revise those estimates used in subsequent periods.

We conducted valuation of our equity as of relevant dates, including September 18, 2008, when the holders of our series B redeemable convertible preferred shares invested in us, June 22, 2009, the time of the June 2009 Modification, and September 15, 2009, the time of the September 2009 Modification. We believe that the decrease in the fair value of our equity from RMB1.77 billion (equivalent to US$224.0 million) as of September 18, 2008 to RMB890.0 million (equivalent to US$130.0 million) as of June 22, 2009 and the decrease in the fair value of our ordinary shares from RMB26.4 per share (equivalent to US$3.9) as of September 18, 2008 to

 

88


Table of Contents

RMB11.4 per share (equivalent to US$1.7) as of June 22, 2009, in each case, after giving effect to the 2009 Share Split, was attributable to the following significant factors and events during the period:

 

   

demand contraction and selling price decrease for solar power products due to impact from global recession and credit market contraction during second half of 2008 and the first half of 2009;

 

   

lower than expected sales in the first two quarters of 2009 and expected slower sales growth in the near future;

 

   

compression of our gross profit margin due to decrease in average selling prices for solar power products and our inability to reduce fixed costs to keep pace with the decrease of its revenue; and

 

   

the decrease in our equity value is in line with our publicly-traded peers which experienced an approximate 50% drop in their market capitalization in the same period.

We believe that the continued increase in the fair value of our equity from RMB890.0 million (equivalent to US$130.0 million) as of June 22, 2009 to RMB1.5 billion (equivalent to US$223.0 million) as of December 31, 2009 and the increase in the fair value of our ordinary shares from RMB11.4 per share (equivalent to US$1.7) as of June 22, 2009 to RMB21.7 per share (equivalent to US$3.2) as of December 31, 2009, in each case, after giving effect to the 2009 Share Split, was attributable to the following significant factors and events during the period:

 

   

better-than-expected recovery and continuing improvement of demand for solar power products;

 

   

full capacity utilization of all products and diminishing above market price raw materials purchase obligations leading to improving profit margins;

 

   

rapid, cost efficient capacity expansion and product diversification obtained through downstream integration of Zhejiang Jinko effective June 30, 2009;

 

   

long-term solar module orders obtained from customers in Taiwan, Israel, Germany, Belgium and China in the second half of 2009;

 

   

market expectation of further demand increase driven by government stimulus programs in various countries, including the United States and China, significantly boosting demand for PV installations; and

 

   

expansion of annual silicon wafer, solar cell and solar module production capacity to approximately 300 MW, 150 MW and 150 MW, respectively by the end of 2009 and plans to expand annual silicon wafer and solar module production capacity to approximately 500 MW each and annual solar cell production capacity to approximately 400 MW by the end of 2010.

In addition, the increase in the fair value of our ordinary shares reflected the acceleration of the anticipated liquidity event in our valuation analysis performed for December 2009 compared to those performed for the first and second quarters, as well as the general improvement in the capital markets and market capitalization of companies in our industry beginning in the same period.

Taxation

We expect to derive net income primarily from Jiangxi Jinko and Zhejiang Jinko, our operating subsidiaries in China. In the past, we also derived net income from Jiangxi Desun and net loss from Xinwei. Both Jiangxi Desun and Xinwei were formerly our other operating subsidiaries in China. Jiangxi Desun and Xinwei ceased to be our subsidiaries from July 28, 2008 and December 28, 2007, respectively. In our discussion of the consolidated income statements for the years ended December 31, 2007 and 2008, we consolidated the financial results of the VIEs, which include Tiansheng, Hexing, Yangfan and Alvagen for the relevant periods. We have determined that we were no longer the primary beneficiary of Yangfan and Alvagen as of September 1, 2008, and Tiansheng and Hexing were no longer VIEs as of September 30, 2008. As a result, we were no longer required to consolidate their financial results with ours as of September 1, 2008 and September 30, 2008,

 

89


Table of Contents

respectively. Prior to January 1, 2008, pursuant to the Income Tax Law of the People’s Republic of China concerning Foreign Investment Enterprise and Foreign Enterprises and Provisional Rules of the PRC on Enterprise Income Tax (collectively the “PRC Income Tax Laws”), our subsidiaries and the VIEs in China were generally subject to Enterprise Income Tax, or EIT, at a statutory rate of 33% on the taxable income as reported in their respective statutory financial statements adjusted in accordance with the PRC Income Tax Laws.

As a foreign invested enterprise, each of Jiangxi Jinko and Zhejiang Jinko is entitled to a two-year tax exemption from PRC income taxes starting from the year in which it achieves a cumulative profit, and a 50% tax reduction for the succeeding three years thereafter. Jiangxi Jinko recorded loss for the year ended December 31, 2007. Jiangxi Desun became a foreign invested enterprise on April 10, 2007, and was exempt from income tax through December 31, 2007. Zhejiang Jinko is exempted from income tax from January 1, 2008 through December 31, 2009 and will be entitled to reduced income tax rate of 12.5% from January 1, 2010 to December 31, 2012. As PRC domestic enterprises, Xinwei, Yangfan, Tiansheng and Alvagen were subject to 33% statutory income tax in the past. Hexing was established in September 2007, and became a foreign invested enterprise since November 2007. Hexing was subject to statutory income tax at the rate of 33% in the year ended December 31, 2007 and 25% thereafter.

On March 16, 2007, the National People’s Congress enacted the EIT Law of the People’s Republic of China, which became effective on January 1, 2008. The EIT Law adopts a uniform enterprise income tax rate of 25% for domestic and foreign invested companies with effect from January 1, 2008. Pursuant to the EIT Law and related regulations, our subsidiaries and the VIEs in China are generally subject to enterprise income tax at a statutory rate of 25% starting from January 1, 2008, except Jiangxi Jinko and Zhejiang Jinko, whose tax holiday was grandfathered under the EIT Law. The first income tax exemption year for each of Jiangxi Jinko and Zhejiang Jinko commenced January 1, 2008.

In addition, under the EIT Law, an enterprise established outside China with “de facto management bodies” within China may be considered a PRC tax resident enterprise and will normally be subject to the PRC enterprise income tax at the rate of 25% on its global income. Under the implementation regulations issued by the State Council relating to the EIT Law, the term “de facto management bodies” refers to management bodies which have, in substance, overall management and control over such aspects as the production and business, personnel, accounts, and properties of the enterprise. Currently, there are no detailed rules or precedents governing the procedures and specific criteria for determining “de facto management body” which are applicable to our company or Paker. As such, it is still unclear if the PRC tax authorities would subsequently determine that, notwithstanding our status as the Cayman Islands holding company of our operating business in China, we should be classified as a PRC tax resident enterprise, whereby our global income will be subject to PRC income tax at a tax rate of 25%. In any event, our company and Paker do not have substantial income from operations outside of China, and we do not expect to derive substantial earnings from operations outside of China in the foreseeable future.

Under the EIT Law and its implementation rules, a withholding tax at the rate of 10% will normally be applicable to dividends payable to investors that are “non-resident enterprises”, to the extent such dividends have their source within China. However, as 100% of the equity interest of Jiangxi Jinko and 25% of the equity interest of Zhejiang Jinko are owned directly by Paker, our Hong Kong subsidiary, and as Hong Kong has an arrangement with China under which the tax rate for dividend income is 5% provided that the Hong Kong parent owns at least a 25% share in the PRC subsidiary, if Paker continues to be deemed as a non-resident enterprise by PRC authorities, dividends paid by Jiangxi Jinko and Zhejiang Jinko to Paker would be subject to a 5% withholding tax. According to the Administrative Measures for Non-Residents Enjoying Tax Treaty Benefits (Trial Implementation) issued by the State Administration of Taxation on August 24, 2009 which became effective on October 1, 2009, the application of the preferential withholding tax rate under bi-lateral tax treaty is subject to the approval of competent PRC tax authorities. According to the Circular of the State Administration of Taxation on How to Understand and Identify “Beneficial Owner” under Tax Treaties which became effective on October 27, 2009, the PRC tax authorities must evaluate whether an applicant for treaty benefits in respect of

 

90


Table of Contents

dividends, interest and royalties qualifies as a “beneficial owner” on a case-by-case basis and following the “substance over form” principle. This circular sets forth the criteria to identify a “beneficial owner” and provides that an applicant that does not carry out substantial business activities, or is an agent or conduit company may not be deemed as a “beneficial owner” of the PRC subsidiary and therefore may not enjoy tax treaty benefit.

Pursuant to the Provisional Regulation of the PRC on Value Added Tax issued by the PRC State Council on December 13, 1993 and further amended on November 5, 2008, or the Provisional Regulation, and its Implementing Rules, all entities and individuals that are engaged in the sale of goods, the provision of processing, repairs and installation services and the importation of goods in China are required to pay value-added tax, or VAT. According to the Provisional Regulation, gross proceeds from sales and importation of goods and provision of services are generally subject to a VAT rate of 17% with exceptions for certain categories of goods that are taxed at a VAT rate of 13%. In addition, under the current Provisional Regulation, the input VAT for the purchase of fixed assets is deductible from the output VAT, except for fixed assets used in non-VAT taxable items, VAT exempted items and welfare activities, or for personal consumption. According to former VAT levy rules, equipment imported for qualified projects is entitled to import VAT exemption and the domestic equipment purchased for qualified projects is entitled to VAT refund. However, such import VAT exemption and VAT refund were both eliminated as of January 1, 2009. On the other hand, if a foreign-invested enterprise obtained the confirmation letter of Domestic or Foreign Invested Project Encouraged by the State before November 10, 2008 and declared importation of equipment for qualified projects before June 30, 2009, it may still be qualified for the exemption of import VAT. The importation of equipment declared after July 1, 2009 will be subject to the import VAT.

Under the Provisional Regulation, the exportation of certain goods is entitled to VAT export rebate. According to the Notice on Increasing the Export Rebate Rates on Textile, Electronic Information and Other Commodities issued by Ministry of Finance and the State Administration of Taxation on March 27, 2009, the export rebate rate on silicon wafer increased from 5% to 13% on April 1, 2009.

Under the current law of the Cayman Islands, we are not subject to any income or capital gains tax. In addition, dividend payments made by us are not subject to any withholding income tax in the Cayman Islands.

Critical Accounting Policies

We prepare our consolidated financial statements in accordance with U.S. GAAP, which requires us to make judgments, estimates and assumptions that affect (i) the reported amounts of assets and liabilities, (ii) disclosure of our contingent assets and liabilities at the end of each reporting period, and (iii) the reported amounts of revenues and expenses during each reporting period. We continually evaluate these estimates and assumptions based on historical experience, knowledge and assessment of current and other conditions, our expectations regarding our future based on available information and reasonable assumptions, which together form our basis for making judgments about matters that are not readily apparent from other sources. Since the use of estimates is an integral component of the financial reporting process, our actual results could differ from those estimates. Some of our accounting policies require a higher degree of judgment than others in their application.

When reviewing the consolidated financial statements, you should consider (i) our selection of critical accounting policies, (ii) the judgments and other uncertainties affecting the application of such policies, and (iii) the sensitivity of reported results to changes in conditions and assumptions. We believe the following accounting policies involve the most significant judgments and estimates used in the preparation of our financial statements.

Variable Interest Entities

Variable interests are contractual, ownership or other interests in an entity that change with changes in the entity’s net asset value. Variable interests in an entity may arise from financial instruments, service contracts,

 

91


Table of Contents

guarantees, leases, or other arrangements with the VIE. An entity that will absorb a majority of the expected losses of the VIEs if they occur, or receive a majority of the expected residual returns of the VIEs if they occur, or both, is considered the primary beneficiary of the VIE. The primary beneficiary must include the assets, liabilities and results of operations of the VIEs in its consolidated financial statements.

For each of the period from June 6, 2006 to December 31, 2006 and the years ended December 31, 2007 and 2008, Jiangxi Desun and Jiangxi Jinko were the sole or predominant customers of Tiansheng, Hexing and Yangfan, which engaged in the procurement and processing of recoverable silicon materials. Historically, we purchased recoverable silicon materials from Tiansheng, Hexing and Yangfan at cost plus margin. You should refer to “Our Corporate History and Structure — Variable Interest Entities” for additional information on the price arrangements with our VIEs. In addition, during such periods, Alvagen bore certain general and administrative expenses on behalf of Jiangxi Desun and Jiangxi Jinko. We determined that Tiansheng, Hexing, Yangfan and Alvagen were VIEs and that we were the primary beneficiary of these VIEs from June 6, 2006 to September 30, 2008, September 3, 2007 to September 30, 2008, June 6, 2006 to September 1, 2008 and April 29, 2007 to September 1, 2008, respectively. The individual shareholders of the equity investment in the VIEs maintain their equity interest in the VIEs to the extent of the contributed registered capital amounts. In accordance with this determination, we have consolidated the results of operations and financial position of each of these VIEs in our consolidated financial statements until they were no longer VIEs or we were no longer their primary beneficiary after meeting certain criteria. The registered capital of the VIEs was recorded as non-controlling interests in our consolidated balance sheet as of December 31, 2006 and 2007, respectively. The cumulative losses of Yangfan and Alvagen as of September 1, 2008 were recorded as additional paid-in capital in our consolidated balance sheet upon deconsolidation. The profits of Tiansheng and Hexing generated during 2008 net of prior year losses were recorded as non-controlling interests in our consolidated statement of operations for the year ended December 31, 2008.

On September 1, 2008, we entered into a cooperation termination agreement with Alvagen that terminated all business relationships and released all claims that either party may have. On September 1, 2008, Yangfan issued a letter of confirmation to confirm that it will not have any business relationship with us as Yangfan ceased its recoverable silicon material business in May 2008. Accordingly, we have determined that we were no longer primary beneficiary of Yangfan and Alvagen as of September 1, 2008, and as a result, we are no longer required to consolidate their financial results with ours as of the same date.

As of September 30, 2008, we had entered into substantially revised agreements with Hexing to place us and Hexing on ordinary commercial terms and terminated our relationship with Tiansheng when it became a supplier of Hexing. As of September 30, 2008, Tiansheng and Hexing had obtained additional capital injections from their equity owners, which enabled them to carry sufficient equity at risk to finance future operational activities without additional subordinated financial support from us. Accordingly we have determined that Tiansheng and Hexing were no longer VIEs as of September 30, 2008 and as a result, we were no longer required to consolidate their financial results with ours as of the same date.

Revenue Recognition

Revenues represent the invoiced value of products sold, net of value added taxes, or VAT. We offer to our customers the right to return or exchange defective products within a prescribed period if the volume of the defective products exceeds a certain percentage of the shipment as specified in the individual sales contract. Actual returns were nil, 0.2% and 0.1% of total sales for the years ended December 31, 2007, 2008 and 2009, respectively. Revenue from the sale of silicon ingot, silicon wafer, solar cell, solar module and recovered silicon materials is generally recognized when the products are delivered and the title is transferred, the risks and rewards of ownership have been transferred to the customer, the price is fixed and determinable and collection of the related receivable is reasonably assured. In the case of sales that are contingent upon customer acceptance, revenue is not recognized until the deliveries are formally accepted by the customers.

 

92


Table of Contents

We recognize revenue for processing services when the services are completed, which is generally evidenced by delivery of processed products to the customers.

Part of our sales to customers requires the customers to prepay before delivery has occurred. Such prepayments are recorded as advances from customers in our consolidated financial statements, until the above criteria have been met.

In the PRC, VAT of 17% on invoiced amount is collected in respect of sales of goods on behalf of the tax authorities. VAT collected from customers, net of VAT paid for purchases, is recorded as a tax payable in the consolidated balance sheet until it is paid to the authorities.

Warranty Cost

It is customary in our industry to warrant the performance of solar modules at certain levels of power output for an extended period. Our solar modules are typically sold with either a two-year or five-year warranty for all defects and a 10-year and 25-year warranty against declines of more than 10.0% and 20.0%, respectively, from the initial minimum power generation capacity at the time of delivery. If a solar module is defective during the relevant warranty period, we will either repair or replace the solar module at our discretion. We began selling solar modules in the first half of 2009 and have not experienced any material warranty claims in connection with declines in the power generation capacity or defect of our solar modules. As of December 31, 2009, we had provision for warranty cost of RMB1.7 million (US$0.3 million).

Impairment of Long-Lived Assets

Long-lived assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. When these events occur, we measure impairment by comparing the carrying amount of an asset to the future undiscounted cash flows expected to result from the use of assets and their eventual disposition. We recognize an impairment loss in the event the carrying amount exceeds the estimated future cash flows attributed to such assets, measured as the difference of the assets and the fair value of the impaired assets. No impairment of long-lived assets was recognized for the years ended December 31, 2007, 2008 and 2009, respectively.

Income Tax

Deferred income taxes are recognized for the tax consequences of temporary differences by applying enacted statutory rates applicable to future years to differences between the financial statement carrying amounts and the tax bases of existing assets and liabilities. The tax base of an asset or liability is the amount attributed to that asset or liability for tax purposes. The effect on deferred taxes of a change in tax rates is recognized in the statement of operations in the period of change. In assessing whether such deferred tax assets can be realized in the future, we need to make judgments and estimates on the ability to generate taxable income in future years. We have provided full valuation allowance on the net deferred tax assets in the past years due to the uncertainty surrounding their realization.

Inventory

Our inventories are stated at the lower of cost or market price. Cost is determined by the weighted average method. Provisions are made for excess, slow moving and obsolete inventory as well as inventory whose carrying value is in excess of market price. We recorded provisions for inventory valuation of RMB5.2 million and RMB4.8 million (US$0.7 million) as of December 31, 2008 and 2009, respectively. We did not record any provision for inventory valuation for the year ended December 31, 2007.

 

93


Table of Contents

Redeemable Convertible Preferred Shares

We issued series A redeemable convertible preferred shares and series B redeemable convertible preferred shares in May 2008 and September 2008, respectively.

The fair value of the ordinary shares was determined retrospectively to the commitment date. Management is responsible for determining the fair value and considered a number of factors including our valuations. Our approach to valuation is based on a discounted future cash flow approach which involves complex and subjective judgments regarding projected financial and operating results, our unique business risks, our operating history and prospects at the commitment date. These judgments are consistent with the plans and estimates that we use to manage the business. There are inherent uncertainties in making these estimates and if we make different judgments or adopt different assumptions, it could result in material differences because the estimated fair value of the ordinary shares would be different. Based on the fair value of our ordinary shares, we determined that series A redeemable convertible preferred shares and series B redeemable convertible preferred shares do not contain beneficial conversion feature as of their respective commitment dates.

The 2009 and 2010 performance adjustment features (the “2009 performance adjustment derivative liability” and the “2010 performance adjustment derivative liability”) embedded in the series B redeemable convertible preferred shares meet the definition of derivatives and accordingly have been bifurcated from the host contract, the series B redeemable convertible preferred shares and accounted for as derivative liabilities.

On June 22, 2009, the holders of series B redeemable convertible preferred shares and our founders agreed to lower the 2009 performance target in assessing the transfer of ordinary shares under the 2009 performance adjustment feature. The effect of this change on the value of the derivative liability was a reduction in value of RMB65.2 million. In addition, a 2010 performance target was added, which is an embedded share transfer feature that meets the definition of a derivative. The fair value of this new derivative at issuance was RMB18.2 million. In consideration of the agreement to lower the 2009 performance target to RMB100 million, on June 22, 2009, our founders transferred an aggregate of 76,258 (3,812,900 after giving effect to the 2009 Share Split) ordinary shares to the holders of series B redeemable convertible preferred shares. The fair value of these ordinary shares on June 22, 2009 amounted to RMB43.6 million and was imputed to us as if our founders (who are principal shareholders) contributed the shares to us and such shares were immediately reissued by us to the holders of the series B redeemable convertible preferred shares. See “Description of Share Capital — History of Share Issuances and Other Financings — June 2009 Modification.”

The June 2009 Modification resulted in: (a) a decrease in the 2009 performance adjustment derivative liability by RMB65.2 million, which was offset by the fair value of the 2010 performance adjustment derivative liability of RMB18.2 million; (b) an effective contribution of ordinary shares valued at RMB43.6 million by our founders to us, which was in turn transferred to the holders of the series B redeemable convertible preferred shares in consideration for agreeing to modify the terms of the 2009 performance adjustment feature. Accordingly, this amount has been treated as a capital contribution and as an offset to the net change in the fair value of the derivative liabilities in (a) above; (c) the recording of compensation expense of RMB3.4 million, which is equal to change in fair value of derivative liabilities, net of the consideration transferred to the holders of series B redeemable convertible preferred shares in (b) above.

On September 15, 2009, our founders reached agreement with the holders of series A and series B redeemable convertible preferred shares on the modification to certain existing terms. See “Description of Share Capital — History of Share Issuances and Other Financings — September 2009 Modification.” The September 2009 Modification resulted in a reduction of RMB2.4 million in the fair value of the 2009 and 2010 performance adjustment derivative liabilities that we recognized in the Consolidated Statement of Operations as Change in Fair Value of Derivatives. The September 2009 Modification also resulted in an additional benefit transfer of RMB15.1 million from the holders of the series A and B redeemable convertible preferred shares to our founders due to the reduction in the fair value of the series A and B redeemable convertible preferred shares on

 

94


Table of Contents

September 15, 2009, as a result of such modification. We recognized a total of RMB17.5 million in compensation expense (including the RMB15.1 million mentioned above) in recognition of the total benefit transferred from the holders of series A and B redeemable convertible preferred shares to our founders that is attributed to us, given our founders are also our employees.

Fair Value of Financial Instruments

We adopted the provisions of the fair value measurement guidance on January 1, 2008 for financial assets and liabilities. The fair value measurement guidance defines fair value as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date (also referred to as an exit price). The implementation of the fair value measurement guidance did not result in any material changes to the carrying values of financial instruments on our opening balance sheet on January 1, 2008 and 2009.

When available, we measure the fair value of financial instruments based on quoted market prices in active markets, valuation techniques that use observable market-based factors or unobservable factors that are corroborated by market data. We internally validate pricing information we obtain from third parties for reasonableness prior to use in the consolidated financial statements. When observable market prices are not readily available, we generally estimate fair value using valuation techniques that rely on alternate market data or factors that are generally less readily observable from objective sources and are estimated based on pertinent information available at the time of the applicable reporting periods. In certain cases, fair values are not subject to precise quantification or verification and may fluctuate as economic and market factors vary and our evaluation of those factors changes. Although we use our best judgment in estimating the fair value of these financial instruments, there are inherent limitations in any estimation technique. In these cases, a minor change in an assumption could result in a significant change in our estimate of fair value, thereby increasing or decreasing the amounts of our consolidated assets, liabilities, equity and net (loss) or income.

Our financial instruments consist principally of (i) cash and cash equivalents, accounts and notes receivable, prepayments and other current assets, restricted cash, (ii) accounts and notes payable, other payables, short-term borrowing, long-term payables relating to capital lease and (iii) derivatives embedded in the series B redeemable convertible preferred shares. As of December 31, 2007, 2008 and 2009, the carrying values of these financial instruments approximated their fair values, with the exception of derivatives embedded in the series B redeemable convertible preferred shares. See “— Selected Statement of Operations Items — Change in Fair Value of Derivatives” and Notes to the Consolidated Financial Statements, Note 26.

On January 1, 2009, we also adopted the same guidance for all non-financial assets and non-financial liabilities. We do not have any non-financial assets or liabilities that are recognized or disclosed at fair value in the financial statements on a recurring basis.

Share-based Compensation

All share-based payments to our employees and directors, including grants of employee share options are recognized as compensation expense in the financial statements over the vesting period of the award based on the fair value of the award determined at the grant date.

The number of awards for which the service is not expected to be rendered during the requisite period should be estimated, and the related compensation cost is not recorded. However, given the exercise restrictions placed on the options that we have granted, the recognition of share-based compensation expense on these options is delayed. Such expense accumulated from grant date will be recognized at the time of an effective initial public offering.

 

95


Table of Contents

Internal Control Over Financial Reporting

In the course of the preparation and external audit of our consolidated financial statements for the years ended December 31, 2007, 2008 and 2009, we and our independent registered public accounting firm identified a number of deficiencies in our internal control over financial reporting, including two material weaknesses and a significant deficiency, as defined in the standards established by the U.S. Public Company Accounting Oversight Board.

The material weaknesses identified were: (1) the lack of resources with appropriate accounting knowledge and experience to prepare and review financial statements and related disclosures in accordance with U.S. GAAP, which was evidenced by (i) the lack of sufficient resources with adequate U.S. GAAP knowledge and experience to identify, evaluate and conclude on certain accounting matters independently, and (ii) the lack of effective controls designed and in place to ensure the completeness and accuracy of the consolidated financial statements and disclosures in accordance with U.S. GAAP, including inappropriate presentation of statement of cash flows for the year ended December 31, 2009 and (2) inadequate review procedures, including appropriate levels of review in the design of period end reporting process that are consistently applied across our entities, to identify inappropriate accounting treatment of transactions, which was evidenced by audit adjustments which included correction of (i) revenue and inventory balance in relation to deliveries to a customer pending the customer’s formal acceptance as of December 31, 2008, (ii) preferred shares accretion and earnings per share for the year ended December 31, 2008, and (iii) deferred taxation accounting for the year ended December 31, 2009 and inappropriate presentation of intangible assets in the consolidated balance sheet as of December 31, 2009.

The significant deficiency was the lack of formally documented corporate accounting policies in relation to the preparation of financial statements in accordance with U.S. GAAP.

Following the identification of these material weaknesses and control deficiencies and in connection with preparation of our consolidated financial statements for the years ended December 31, 2007 and 2008 and 2009, we performed additional manual review procedures, such as an extensive review of journal entries and a thorough review of account reconciliations for key accounts, to ensure the completeness and accuracy of the underlying financial information used to generate the consolidated financial statements.

We have begun taking and/or plan to take actions and measures to improve our internal control over financial reporting in order to obtain reasonable assurance regarding the reliability of financial statements, which include, but not limited to:

 

   

appointment of a new chief financial officer in September 2008 who has experience with and knowledge of U.S. GAAP and is a U.S. certified public accountant;

 

   

adoption of additional policies and procedures, in connection with the implementation of our electronic enterprise resource planning system, to strengthen our internal control over financial reporting;

 

   

formulation of internal policies relating to internal control over financial reporting, including the preparation of a manual containing comprehensive written accounting policies and procedures that can effectively and efficiently guide our financial personnel in addressing significant accounting issues and assist in preparing financial statements that are in compliance with U.S. GAAP and SEC requirements;

 

   

provision of further training to our accounting staff to enhance their knowledge of U.S. GAAP;

 

   

appointment of a financial controller and recruiting a new reporting manager with the relevant accounting expertise and adequate experience;

 

   

establishment of a legal and internal auditing department to strengthen our internal audit function, provide internal legal support and assist in our internal control compliance; and

 

   

the plan to engage an outside consulting firm to review our internal control processes, policies and procedures to ensure compliance with the Sarbanes-Oxley Act.

 

96


Table of Contents

While we have begun taking the foregoing actions and measures to address the material weaknesses and significant deficiency identified, the implementation of these actions and measures may not be sufficient to address the material weaknesses and significant deficiency in our internal control over financial reporting to provide reasonable assurance that our internal control over financial reporting is effective, and we cannot yet conclude that such control deficiencies have been fully remedied. Our failure to remedy these control deficiencies, identify and address any other material weaknesses or significant deficiencies, and implement new or improved controls successfully in a timely manner could result in inaccuracies in our financial statements and could impair our ability to comply with applicable financial reporting requirements and related regulatory filings on a timely basis. As a result, our business, financial condition, results of operations and prospects, as well as the trading price of our ADSs, may be materially and adversely affected. Moreover, we anticipate that we will incur considerable costs and devote significant management time and other resources to comply with SOX 404 and other requirements of the Sarbanes-Oxley Act.

Results of Operations

The following selected consolidated statements of operations data for the years ended December 31, 2007, 2008 and 2009 have been derived from our audited consolidated financial statements, which are included elsewhere in this prospectus.

 

    For the Year Ended December 31,  
    2007     2007     2008     2008     2009     2009     2009  
    (RMB)     (%)     (RMB)     (%)     (RMB)     (US$)     (%)  
    (in thousands, except percentages)  

Consolidated Statement of Operations Data:

             

Total revenues

  709,152.9      100.0      2,183,614.1      100.0      1,567,859.6      229,692.7      100.0   

Sales of recovered silicon materials

  536,755.2      75.7      902,249.0      41.4      28,039.4      4,107.7      1.8   

Sales of silicon ingots

  170,007.2      24.0      483,544.9      22.1      98.9      14.5      0.006   

Sales of silicon wafers

            794,860.1      36.4      1,102,232.8      161,478.0      70.3   

Sales of solar cells

                      225,866.3      33,089.6      14.4   

Sales of solar modules

                      182,015.1      26,665.4      11.6   

Processing service fees

  2,390.5      0.3      2,960.1
  
  0.1      29,607.1      4,337.5      1.9   

Cost of revenues

  (621,024.0   (87.6   (1,872,088.6   (85.7   (1,337,647.5   (195,966.5   (85.3

Gross profit

  88,128.9      12.4      311,525.5      14.3      230,212.1      33,726.2      14.7   

Total operating expenses

  (12,540.3   (1.8   (40,271.7   (1.9   (107,739.5   (15,783.9   (6.9

(Loss)/income from operations

  75,588.6      10.6      271,253.8      12.4      122,472.6      17,942.3      7.8   

Interest income/(expenses), net

  (321.9   (0.0   (6,323.9   (0.3   (29,936.8   (4,385.8   (1.9

Subsidy income

  546.8      0.1      637.3      0.0      8,569.1      1,255.4      0.5   

Loss on disposal of subsidiary

            (10,165.5   (0.5   82.1      12.0      0.005   

Exchange loss

  (68.0   (0.0   (4,979.8   (0.2   (2,181.5   (319.6   (0.1

Other income/(expenses), net

  300.0      0.0      (490.1   (0.0   (1,338.6   (196.1   (0.1

Change in fair value of derivatives

       0.0      (29,812.7   (1.4   (13,599.3   (1,992.3   (0.9

(Loss)/income before income taxes

  76,045.5      10.7      220,119.1      10.0      84,067.6      12,315.9      5.4   

Income taxes

            (822.3   (0.0   1,342.0      196.6      0.1   

Net (loss)/income

  76,045.5      10.7      219,296.8      10.0      85,409.6      12,512.5      5.4   

Less: Net income attributable to the non-controlling interests

            (576.8   (0.0               

Net (loss)/income attributable to Jinko Solar Holding Co., Ltd.

  76,045.5      10.7      218,720.0      10.0      85,409.6      12,512.5      5.4   

Year Ended December 31, 2009 Compared to Year Ended December 31, 2008

Revenues.  Our revenues decreased by 28.2% from RMB2,183.6 million for the year ended December 31, 2008 to RMB1,567.9 million (US$229.7 million) for the year ended December 31, 2009, primarily because industry demand and market prices of our products were seriously affected by the global recession and credit market contraction from the second half of 2008 through the first half of 2009, partially offset by the effect of the change in our product mix and increase in the sales volume of silicon wafers, solar cells and solar modules.

Our sales of recovered silicon materials decreased by 96.9% from RMB902.2 million for the year ended December 31, 2008 to RMB28.0 million (US$4.1 million) for the year ended December 31, 2009, primarily

 

97


Table of Contents

because, commencing in 2009, we retained a substantial majority of our output of recovered silicon materials for our own silicon wafer production to capture the efficiencies of our vertically integrated production process, which resulted in a decrease in sales volume of recovered silicon materials from 397.9 metric tons in 2008 to 11.7 metric tons in 2009. Our sales of recovered silicon materials during 2009 were contracted in December 2008 and the sales were made in the first quarter of 2009, and did not fully reflect the significant decrease in selling prices that occurred in 2009.

Our sales of silicon ingots decreased from RMB483.5 million for the year ended December 31, 2008 to RMB98.9 thousand (US$14.5 thousand) for the year ended December 31, 2009, primarily because, commencing in 2009, we retained a substantial majority of our output of silicon ingots for our own silicon wafer production to capture the efficiencies of our vertically integrated production process, which resulted in a decrease in sales volume of silicon ingots from 33.1 MW for the year ended December 31, 2008 to 0.01 MW for the year ended December 31, 2009. Average selling prices also decreased by 53.4% from the year ended December 31, 2008 to the year ended December 31, 2009.

Our sales of silicon wafers increased by 38.7% from RMB794.9 million for the year ended December 31, 2008 to RMB1,102.2 million (US$161.5 million) for the year ended December 31, 2009, primarily because we commenced production of monocrystalline wafers in March 2008 and multicrystalline wafers in July 2008, and as a result, our sales volumes of silicon wafers increased by 251.0% from 51.4 MW for the year ended December 31, 2008 to 180.4 MW for the year ended December 31, 2009. The increase in sales of silicon wafers was partially offset by a 60.6% decrease in average selling prices for the year ended December 31, 2009 compared to the year ended December 31, 2008.

Our sales of solar cells for the year ended December 21, 2009 were RMB225.9 million (US$33.1 million) as we commenced production and sales of solar cells in July 2009. We sold 27.3 MW of solar cells for the year ended December 31, 2009.

Our sales of solar modules for the year ended December 31, 2009 were RMB182.0 million (US$26.7 million) as we commenced production and sales of solar modules in August 2009. We sold 14.4 MW of solar modules for the year ended December 31, 2009.

Our processing service fee increased from RMB3.0 million for the year ended December 31, 2008 to RMB29.6 million (US$4.3 million) for the year ended December 31, 2009, primarily because we employed excess capacity to process multicrystalline wafers for our customers for the year ended December 31, 2009. In the year ended December 31, 2008, our processing service fees were derived from processing multicrystalline ingots for our customers on a limited scale as we did not have substantial excess capacity during such period. We intend to continue to maximize the utilization of our production capacity for the production of our own products, while providing processing services with our excess capacity from time to time on a limited basis.

Cost of Revenues.  Our cost of revenues decreased by 28.6% from RMB1,872.1 million for the year ended December 31, 2008 to RMB1,337.6 million (US$196.0 million) for the year ended December 31, 2009, primarily due to the decrease in the purchase prices of silicon raw materials, partially offset by the effect of our changing product mix and increase in the volume of silicon raw materials purchased in line with our increased production scale. Depreciation of property, plant and equipment increased by 241.9% from RMB12.8 million 2008 to RMB43.8 million (US$6.4 million) 2009 as we acquired additional equipment and facilities to expand our production capacity and product line in 2009. As we continue to expand our operations, we expect depreciation of property, plant and equipment to continue to increase in the future.

Gross Profit.  Our gross profit decreased by 26.1% from RMB311.5 million for the year ended December 31, 2008 to RMB230.2 million (US$33.7 million) for the year ended December 31, 2009. Our gross margin increased from 14.3% for the year ended December 31, 2008 to 14.7% for year ended December 31, 2009, primarily due to our product mix upgrade.

 

98


Table of Contents

Operating Expenses.  Our operating expenses increased by 167.2% from RMB40.3 million for the year ended December 31, 2008 to RMB107.7 million (US$15.8 million) for the year ended December 31, 2009, primarily due to the increase in our general and administrative expenses and selling and marketing expenses. Our general and administrative expenses increased by 119.9% from RMB38.7 million for the year ended December 31, 2008 to RMB85.1 million (US$12.5 million) for the year ended December 31, 2009, primarily attributable to (i) non-cash compensation expenses of RMB20.9 million (US$3.1 million) recognized in the year ended December 31, 2009 as the result of the June 2009 Modification and September 2009 Modification and (ii) the increase in salaries due to the increase in the number of our employees as we hired additional employees in line with the expansion of our operation. The compensation expenses we recognized for the year ended December 31, 2009 as a result of the June 2009 Modification and the September 2009 Modification were non-cash charges which had no impact on our cash flow. Our selling and marketing expenses increased significantly from RMB1.2 million for the year ended December 31, 2008 to RMB16.7 million (US$2.5 million) for the year ended December 31, 2009, primarily because we significantly increased our sales and marketing efforts by providing samples and undertaking additional marketing activities as we expanded our product line further down the solar power value chain for the year ended December 31, 2009. In addition, our research and development expenses increased from RMB0.4 million for the year ended December 31, 2008 to RMB5.9 million (US$0.9 million) for the year ended December 31, 2009 in line with our increased research and development efforts, in particular, on solar cells and solar modules.

Income from Operations.  As a result of the foregoing, our income from operations decreased by 53.8% from RMB271.3 million for the year ended December 31, 2008 to RMB125.3 million (US$18.4 million) for the year ended December 31, 2009. Our operating profit margin decreased from 12.4% for the year ended December 31, 2008 to 8.0% for the year ended December 31, 2009.

Interest Expenses, Net.  Our net interest expenses increased from RMB6.3 million for the year ended December 31, 2008 to RMB29.9 million (US$4.4 million) for the year ended December 31, 2009, primarily due to a significant increase in our average balance of short-term and long-term borrowings. The average balance of our short-term and long-term borrowings increased significantly from 2008 to 2009 as our capital expenditure and working capital requirements increased, primarily due to the acquisition of Zhejiang Jinko, expansion of our solar cell and solar module production capacity and commencement of sales of solar modules on credit terms in line with market practice.

Subsidy Income.  We received government subsidy totaling RMB8.6 million (US$1.3 million), including subsidy for our expansion of production scale, technology upgrades and development of export markets, for the year ended December 31, 2009; while for the year ended December 31, 2008, we received government subsidy of RMB0.6 million, including the government grant Jiangxi Desun received to mitigate its losses resulting from severe winter weather conditions in early 2008.

Investment Loss.  In July 2008, we disposed of Paker’s 27.02% equity interest in Jiangxi Desun in connection with our 2008 Restructuring and recorded a loss of RMB10.2 million from such disposal, whereas there was no corresponding investment loss in 2009.

Exchange Loss.  We incurred foreign exchange loss of RMB2.2 million (US$0.3 million) for the year ended December 31, 2009 primarily due to the effect of the appreciation of the Japanese Yen against Renminbi on our Japanese Yen denominated payables. We incurred foreign exchange loss of RMB5.0 million for the year ended December 31, 2008 as a third-party supplier returned our U.S. dollar advance payments which depreciated against the Renminbi in 2008.

Other Expenses, Net.  Our net other expenses increased by 160.0% from RMB0.5 million for the year ended December 31, 2008 to RMB1.3 million (US$0.2 million) for the year ended December 31, 2009, primarily due to a RMB1.0 million (US$146.5 thousand) donation we made in the year ended December 31, 2009.

 

99


Table of Contents

Change in fair value of derivatives.  We had non-cash charges relating to change in fair value of derivatives recognized in earnings of RMB13.6 million (US$2.0 million) and RMB29.8 million for the years ended December 31, 2009 and 2008 respectively. See “— Critical Accounting Policies — Redeemable Convertible Preferred Shares”.

Income Taxes.  Our income taxes was RMB0.8 million for the year ended December 31, 2008 because Tiansheng and Yangfan, two of the former VIEs that were consolidated by us until September 30, 2008 and September 1, 2008, respectively, incurred income tax expenses for the year ended December 31, 2008. We had deferred tax benefits of RMB1.3 million (US0$0.2 million) for the year ended December 31, 2009 resulting from the provisions we made in 2009 which would be deductible in the future. Jiangxi Jinko and Zhejiang Jinko were exempted from income tax as foreign-invested enterprises in 2009.

Net Income attributable to JinkoSolar Holding Co., Ltd.  As a result of the foregoing, our net income attributable to JinkoSolar Holding Co., Ltd. decreased from RMB218.7 million for the year ended December 31, 2008 to RMB85.4 million (US$12.5 million) for the year ended December 31, 2009. Our net profit margin decreased from 10.0% for the year ended December 31, 2008 to 5.4% for the year ended December 31, 2009.

Year Ended December 31, 2008 Compared to Year Ended December 31, 2007

Revenues.  Our revenues increased by 207.9% from RMB709.2 million for the year ended December 31, 2007 to RMB2,183.6 million for the year ended December 31, 2008, primarily because we commenced manufacturing and sales of monocrystalline ingots and wafers and multicrystalline ingots and wafers in August 2007, March 2008, June 2008 and July 2008, respectively. For the year ended December 31, 2007, we sold only recovered silicon materials (RMB536.8 million) and monocrystalline silicon ingots (RMB170.0 million) which we commenced manufacturing in August 2007. As a result, our revenues generated from sales of silicon ingots and wafers increased from RMB170.0 million and nil for the year ended December 31, 2007 to RMB483.5 million and RMB794.9 million for the year ended December 31, 2008, respectively. Our revenue from sales to a subsidiary of ReneSola, a related party, amounted to RMB381.4 million and RMB631.9 million, which accounted for 53.8% and 28.9% of our total revenue, for the years ended December 31, 2007 and 2008, respectively.

Our sales of recovered silicon materials increased by 68.1% from RMB536.8 million for the year ended December 31, 2007 to RMB902.2 million for the year ended December 31, 2008, primarily due to a 47.5% increase in the average selling price as well as the increase in sales volume from 349.1 metric tons to 397.9 metric tons, which resulted from strong demand, increased supply of recoverable silicon materials and our expanded processing capacity.

Our sales of silicon ingots increased by 184.4% from RMB170.0 million for the year ended December 31, 2007 to RMB483.5 million for the year ended December 31, 2008, primarily due to the increase in sales volume of our silicon ingots by 162.7%, from 12.6 MW to 33.1 MW, as well as an 8.3% increase in the average selling price, which resulted from strong demand and our expanded production capacity.

Our sales of silicon wafers increased from nil for the year ended December 31, 2007 to RMB794.9 million for the year ended December 31, 2008 as we began to sell our silicon wafer products in 2008.

Our processing service fees increased by 25.0% from RMB2.4 million for the year ended December 31, 2007 to RMB3.0 million for the year ended December 31, 2008, primarily because we commenced processing multicrystalline ingots for our customers in 2008.

Cost of Revenues.  Our cost of revenues increased by 201.5% from RMB621.0 million for the year ended December 31, 2007 to RMB1,872.1 million for the year ended December 31, 2008, primarily due to the increase in sales of our products and, to a lesser extent, the increase in purchase cost of silicon raw materials.

 

100


Table of Contents

Gross Profit.  Our gross profit increased by 253.6% from RMB88.1 million for the year ended December 31, 2007 to RMB311.5 million for the year ended December 31, 2008. Our gross margin increased from 12.4% for the year ended December 31, 2007 to 14.3% for the year ended December 31, 2008 mainly because sales of silicon ingots and wafers accounted for 58.5% of our revenues in 2008, compared to 24.0% for the year ended December 31, 2007, when our revenues were primarily generated from the sales of recovered silicon materials, which generated lower margins than sales of silicon ingots and wafers.

Operating Expenses.  Our operating expenses increased by 222.4% from RMB12.5 million for the year ended December 31, 2007 to RMB40.3 million for the year ended December 31, 2008, primarily due to the increase in our general and administrative expenses. Our general and administrative expenses increased by 245.5% from RMB11.2 million for the year ended December 31, 2007 to RMB38.7 million for the year ended December 31, 2008, primarily due to the increase in employees’ salaries, social welfare payments and insurance premiums because we hired additional employees in connection with the expansion of our business. General and administrative expenses in the years ended December 31, 2007 and 2008 also included the amortization of land use rights amounting to RMB73.8 thousand and RMB2.7 million, respectively. The increase in our operating expenses also resulted from the increase in our research and development expenses from RMB50.8 thousand for the year ended December 31, 2007 to RMB441.8 thousand for the year ended December 31, 2008.

Income from Operations.  As a result of the foregoing, our income from operations increased by 258.9% from RMB75.6 million for the year ended December 31, 2007 to RMB271.3 million for the year ended December 31, 2008. Our operating profit margin increased from 10.7% for the year ended December 31, 2007 to 12.4% for the year ended December 31, 2008, primarily due to the commencement of sales of silicon ingots and wafers which generate higher margins than sales of recovered silicon materials.

Interest Expenses, Net.  Our net interest expenses increased from RMB321.9 thousand for the year ended December 31, 2007 to RMB6.3 million for the year ended December 31, 2008, primarily due to a significant increase in our average balance of short-term borrowings.

Subsidy Income.  Jiangxi Jinko and Jiangxi Desun received grants from the government of Shangrao Municipality and the Shangrao Economic Development Zone as awards for their contributions to the development of the local economy in the past. In 2008, Jiangxi Desun also received government grants to mitigate its losses resulting from severe winter weather conditions in early 2008. The subsidies we received in the years ended December 31, 2007 and 2008 amounted to RMB546.8 thousand and RMB637.3 thousand, respectively.

Investment Loss.  In July 2008, we disposed of Paker’s 27.02% equity interest in Jiangxi Desun in connection with our 2008 Restructuring and recorded a loss of RMB10.2 million from such disposal.

Exchange Loss.  Our exchange loss increased from RMB68.0 thousand for the year ended December 31, 2007 to RMB5.0 million for the year ended December 31, 2008, primarily due to foreign exchange losses we incurred as a third-party supplier returned our U.S. dollar advance payments which depreciated against the Renminbi during the year ended December 31, 2008.

Other Income or Expenses, Net.  We had net other income of RMB300.0 thousand for the year ended December 31, 2007 primarily due to our sales of used packaging materials. We had net other expenses of RMB490.1 thousand for the year ended December 31, 2008, primarily due to our donations to victims of the Sichuan Earthquake which occurred in May 2008.

Change in fair value of derivatives.  We had non-cash charges relating to change in fair value of derivative recognized in earnings of RMB29.8 million for the year ended December 31, 2008. See “— Critical Accounting Policies — Redeemable Convertible Preferred Shares”.

 

101


Table of Contents

Income taxes.  Our income taxes increased from nil for the year ended December 31, 2007 to RMB822.3 thousand for the year ended December 31, 2008, primarily because Jiangxi Desun as well as Tiansheng and Yangfan, two of the former VIEs, incurred income tax expenses for the year ended December 31, 2008. Our subsidiaries, Jiangxi Jinko and Jiangxi Desun, did not incur any income tax expenses during the year ended December 31, 2007. Jiangxi Desun was loss making from January 1, 2007 to April 9, 2007 and was exempted from income tax as a foreign-invested enterprise since April 10, 2007 to December 31, 2007 and Jiangxi Jinko was loss making during 2007. While in the year ended December 31, 2008, Jiangxi Desun was profit making for the period from January 1, 2008 to July 28, 2008 when it was deconsolidated. Jiangxi Jinko was exempted from income tax as a foreign-invested enterprise for the year ended December 31, 2008. The VIEs did not generate income tax expenses for the year ended December 31, 2007 because they were loss making. Hexing and Alvagen had no taxable profit for the year ended December 31, 2008. Xinwei was consolidated into our consolidated financial statements from July 16, 2007 to December 28, 2007 and was loss making during such period. See “— Selected Statement of Operations Items — Taxation.

Non-controlling Interests.  Non-controlling interests were RMB576.8 thousand for the year ended December 31, 2008, which represented the profits of Tiansheng and Hexing during 2008, net of prior year losses. Non-controlling interests was nil for the year ended December 31, 2007 because the VIEs did not record profits for that period.

Net Income attributable to JinkoSolar Holding Co., Ltd.  As a result of the factors discussed above, our net income attributable to JinkoSolar Holding Co., Ltd. increased by 187.8% from RMB76.0 million for the year ended December 31, 2007 to RMB218.7 million for the year ended December 31, 2008. Our net profit margin decreased from 10.7% for the year ended December 31, 2007 to 10.0% for the year ended December 31, 2008.

 

102


Table of Contents

Selected Quarterly Results of Operations

The following table presents our unaudited condensed consolidated quarterly results of operations for the eight quarterly periods ended December 31, 2009. You should read the following table in conjunction with our audited consolidated financial statements and related notes included elsewhere in this prospectus. We have prepared the unaudited condensed consolidated quarterly financial information on the same basis as our audited consolidated financial statements. This unaudited condensed consolidated financial information includes all adjustments, consisting only of normal recurring adjustments, that we consider necessary for a fair representation of our operating results for the quarters presented. Because our business is relatively new, our operating results for any particular quarter are not necessarily indicative of our future results. Furthermore, our quarterly operating results may fluctuate from period to period based on changes in customer demand and the seasonality of consumer spending and industry demand for solar power products. For additional risks, see “Risk Factors — Risks Related to Our Business and Our Industry — Our operating results may fluctuate from period to period in the future.”

 

    2008     2009  
    March 31     June 30     September 30     December 31     March 31     June 30     September 30     December 31,  
   

RMB

    RMB     RMB     RMB     RMB     RMB     RMB     RMB  
   

(in thousands, except share and per share data)

 

Revenues

  365,931.6      549,908.2      623,333.7      644,440.7      259,865.9      221,231.7      398,930.5      687,831.5   

Cost of revenues

  (318,845.1   (472,110.8   (522,802.6   (558,330.2   (242,524.0   (183,198.0   (335,822.3   (576,103.2

Gross profit

  47,086.5      77,797.4      100,531.1      86,110.5      17,341.9      38,033.7      63,108.2      111,728.3   

Total operating expenses

  (6,220.8   (8,135.3   (12,546.5   (13,369.2   (9,984.8   (18,765.6   (38,909.1   (40,080.0

(Loss)/Income from operations

  40,865.7      69,662.2      87,984.6      72,741.3      7,357.1      19,268.1      24,199.1      71,648.3   

Interest income/(expenses), net

  (838.8   (1,753.1   (1,515.6   (2,216.4   (4,623.1   (4,741.4   (10,226.1   (10,346.2

Subsidy income

  637.3                     2,721.0      2,506.0      3,060.6      281.5   

Loss on disposal of subsidiary

            (10,165.5                       82.1   

Exchange gain/(loss)

  (1,386.0   (2,366.2   (1,222.6   (5.1   2,261.9      (1,093.5   (1,835.6   (1,514.3

Other income/(expenses), net

  118.0      (278.0   54.4      (384.5   207.3      (494.9   (308.1   (742.9

Change in fair value of derivatives

            204.7      (30,017.4   (24,296.8   (11,242.7   (999.2   22,939.3   

(Loss)/Income before income taxes

  39,396.2      65,264.9      75,339.9      40,117.9      (16,372.5   4,201.6      13,890.7      82,347.8   

Income taxes

  (25.9   (747.1   (49.2                       1,342.0   

Net (loss)/income

  39,370.3      64,517.8      75,290.7      40,117.9      (16,372.5   4,201.6      13,890.7      83,689.8   

Less: Net income attributable to the non-controlling interests

            (576.8                         

Net income attributable to JinkoSolar Holding Co., Ltd.

  39,370.3      64,517.8      74,713.9      40,117.9      (16,372.5   4,201.6      13,890.7      83,689.8   

Net (loss)/income attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders per share basic and diluted

  0.79      1.25      1.24      0.25      (0.86   (0.63   (0.30   1.06   

Weighted average ordinary shares outstanding basic and diluted

  50,000,000      50,249,175      50,731,450      50,731,450      50,731,450      50,731,450      50,731,450      50,731,450   

 

103


Table of Contents

Liquidity and Capital Resources

We have financed our operations primarily through equity contributions from our shareholders, issuance of preferred shares and cash flow generated from operations as well as short-term and long-term borrowings.

The following table sets forth the principal amounts of our outstanding short-term borrowings including outstanding short-term borrowings under credit quotas as of December 31, 2009:

 

Lending Institution

   Principal Amount
Outstanding(1)
     (RMB)    (US$)
     (in millions)

Jiangxi Jinko

     

Agricultural Bank of China

   209.0    30.6

Bank of China

   149.0    21.8

China Construction Bank

   11.0    1.6

China Merchants Bank

   20.0    2.9

Zhejiang Jinko

     

Communication Bank

   27.0    4.0

Industrial and Commercial Bank of China

   33.1    4.8

Bank of China

   49.0    7.2

Pudong Development Bank

   18.0    2.6

 

(1)   Does not include current portion of long-term borrowings.

These short-term borrowings bore interest at rates per annum from 4.78% to 5.31%, and were secured by mortgages over our fixed assets and pledge over inventories and in some cases are also guaranteed by our founders. In addition, some of these short-term borrowings were secured by mortgages over the fixed assets of Jiangxi Desun or guaranteed by Jiangxi Desun and, in either case, also guaranteed by our founders. The short-term borrowings outstanding as of December 31, 2009 also included loans of RMB25.2 million from Industrial and Commercial Bank of China, which were denominated and repayable in Euro.

Since December 31, 2009 we have made short-term borrowings in the aggregate principal amount of RMB420.2 million from Communication Bank, Agricultural Bank of China, Industrial and Commercial Bank of China, Bank of China, China Construction Bank and China Merchants Bank, and repaid short-term bank borrowings of RMB209.1 million.

The following table sets forth the principal amounts of our outstanding long-term borrowings as of December 31, 2009:

 

Lending Institution

   Principal Amount
Outstanding(1)
     (RMB)    (US$)
     (in millions)

Jiangxi Jinko

     

Agricultural Bank of China(2)

   170.0    24.9

Bank of China

   180.0    26.3

Zhejiang Jinko

     

Communication Bank

   30.0    4.4

China Construction Bank

   30.0    4.4

 

(1)   Includes current portion of long-term borrowings.

 

(2)   Includes RMB50 million of entrusted loans under the Entrusted Loan Agreements with Agricultural Bank of China and Heji Investment.

 

104


Table of Contents

Our long-term borrowings have terms of two to three years and will mature from May 2010 to October 2012. These long-term borrowings bore interest at rates per annum from 4.05% to 8.99%. Some of these long-term borrowings are guaranteed by our founders.

The balance of our short-term and long-term borrowings increased significantly from December 31, 2008 to December 31, 2009 as our capital expenditure and working capital requirements increased, primarily due to the acquisition of Zhejiang Jinko, expansion of our solar cell and solar module production capacity and commencement of sales of solar modules on credit terms in line with market practice.

Since December 31, 2009 we have obtained additional long-term bank borrowings of RMB30 million from China Construction Bank and Industrial and Commercial Bank of China.

On June 13, 2009, we entered into the Heji Loan Agreement with Heji Investment, for loans with an aggregate principal amount of up to RMB100 million. We borrowed RMB50.0 million from Heji Investment under the Heji Loan Agreement. In September and October 2009, we and Heji Investment re-arranged our borrowings under the Heji Loan Agreement into entrusted loans with an aggregate principal amount of RMB50.0 million pursuant to the Entrusted Loan Agreements with Agricultural Bank of China. Under a typical entrusted loan arrangement, the entrustor which is the actual lender deposits the amount of the loan principal with the entrusted bank. The entrusted bank then lends the principal to the borrower according to the direction of the entrustor while the entrustor bears the risk of the default by the borrower on the repayment of the principal and interest. The relevant PRC regulations prohibit a non-financial institution such as Heji Investment from lending directly to another company and therefore, the rearrangement of the loan from Heji Investment from a direct loan into entrusted loans enabled Heji Investment to comply with such PRC regulations.

As of December 31, 2009, our aggregate short-term and long-term borrowings extended by commercial banks in China were RMB516.1 million (US$75.6 million) and RMB410.0 million (US$60.1 million), respectively. In addition, we also had available credit facilities amounting to RMB44.0 million (US$6.5 million) as of December 31, 2009. Our total credit quotas confirmed by commercial banks in China were RMB1,317.6 million (US$193.0 million). Commercial banks in China extend credit to borrowers based on national monetary policies and the banks’ own evaluation of a borrower’s risk profile and credit-worthiness. Commercial banks confirm the credit quota, which is normally the maximum amount that a commercial bank may lend to the borrower for working capital and trade finance from time to time to facilitate the borrower’s access to such credit. However, the credit quota is subject to adjustment based on prevailing circumstances and does not constitute a legally binding commitment of the commercial bank, and the borrower’s access to such credit is still subject to examination and approval by the commercial bank based on its internal rules.

Our loan agreements with these banks typically contain standard restrictive covenants including those that restrict our ability to grant liens on our assets to secure debt of any third parties and restrict the ability of Jiangxi Jinko and Zhejiang Jinko to distribute dividends to us.

Cash Flows and Working Capital

As of December 31, 2009, December 31, 2008 and December 31, 2007, we had RMB152.5 million (US$22.3 million), RMB27.3 million and RMB27.2 million in cash and cash equivalents (not including restricted cash), respectively. Cash consists primarily of cash on hand and demand deposits. Restricted cash, which was RMB72.8 million (US$10.7 million) as of December 31, 2009 and RMB9.7 million as of December 31, 2008, represents deposits held by a bank which are not available for our general use. These deposits are held as collateral for issuance of letters of credit and bank acceptance notes to vendors for the purchase of raw materials, machinery and equipment which generally mature within six months.

In the years ended December 31, 2009, 2008 and 2007, we received proceeds from issuance of ordinary shares of nil, nil and RMB97.2 million respectively. In the years ended December 31, 2008 and 2007, Jiangxi

 

105


Table of Contents

Desun received capital injections of nil and RMB48.4 million respectively, and the VIEs also received capital contributions from their equity holders of RMB10.8 million and RMB5.0 million respectively, for the same periods. In addition, we received RMB163.5 million and RMB235.4 million, respectively, in net proceeds from the issuance of series A redeemable convertible preferred shares and series B redeemable convertible preferred shares in 2008. As of December 31, 2009, December 31, 2008 and December 31, 2007, we had nil, nil and RMB92.4 million respectively in advances from a subsidiary of ReneSola, a related party. Advances from third-party customers amounted to RMB36.8 million (US$5.4 million), RMB184.7 million and RMB162.0 million as of December 31, 2009, December 31, 2008 and December 31, 2007, respectively. As of December 31, 2009, December 31, 2008 and December 31, 2007, we had nil, nil and RMB10.6 million respectively in short-term borrowings from related parties. Short-term borrowings from third parties including current portion of long-term bank borrowings amounted to RMB576.1 million (US$84.4 million), RMB150.0 million and RMB23.0 million as of December 31, 2009, December 31, 2008 and December 31, 2007, respectively. Our total short- term borrowings outstanding as of December 31, 2009 bore interest at a weighted average rate of 5.19% per annum. For more information on our short-term borrowings, see above and “— Contractual Obligations and Commercial Commitments.”

As of December 31, 2009, we had entered into six long-term silicon wafer sales contracts with Alex New Energy Co., Ltd., or Alex New Energy, Green Power PV Co., Ltd., or Green Power, Jiangyin Jetion Science and Technology Co., Ltd., or Jetion, Jiangxi Risun Solar Energy Co., Ltd., or Risun, Solland Solar Cells B.V., or Solland, Win-Korea Trading PTY., Ltd., or Win-Korea, pursuant to which they have committed to pay an aggregate of RMB130.4 million (US$19.1 million) in prepayments to us by December 31, 2009, respectively. As of December 31, 2009, we had a balance of prepayments totaling RMB17.4 million (US$2.5 million) under such long-term silicon wafer sales contracts. We have renegotiated with these customers and will not require them to make further prepayment under such long-term silicon wafer sales contracts or plan to include similar provisions for prepayment in our future long-term silicon wafer agreements. In addition, as of December 31, 2009, we had entered into three long-term contracts for sales of our solar module products, pursuant to which we are entitled to receive an aggregate of US$1.0 million in deposit. As of December 31, 2009, we had received deposit of US$1.0 million under such long-term contracts. We plan to continue to include provisions for prepayment or deposit in our future solar module long-term sales or distribution contracts.

We have significant working capital commitments relating to prepayments to suppliers under long-term supply contracts for virgin polysilicon, as well as prepayments for deliveries of recoverable silicon materials. Advances to suppliers to be utilized within one year relate primarily to advances paid to suppliers of recoverable silicon materials, while advances to suppliers of virgin polysilicon are to be utilized beyond one year. Advances to suppliers to be utilized within one year were RMB110.6 million and RMB93.3 million (US$13.7 million) as of December 31, 2008 and 2009, respectively. Advances to suppliers to be utilized beyond one year were RMB187.3 million and RMB230.9 million (US$33.8 million) as of December 31, 2008 and 2009, respectively. The decrease in the balance of advances to suppliers to be utilized within one year as of December 31, 2009 compared to December 31, 2008 reflects decrease in our prepayment to suppliers of silicon materials to secure supply of silicon materials as the constraint on the supply of silicon materials eased in 2009. The increase in the balance of advances to suppliers to be utilized beyond one year is primarily attributable to the two long-term virgin polysilicon supply contracts we entered into with Zhongcai Technological and Hoku in July 2008. During the fourth quarter of 2008, we renegotiated the prepayment terms of both such contracts to extend a portion of the prepayment obligations to the first half of 2009. See “Risk Factors — Risks Related to Our Business and Our Industry — Prepayment arrangements to suppliers for the procurement of silicon raw materials expose us to the credit risks of such suppliers and may also significantly increase our costs and expenses, which could in turn have a material adverse effect on our financial condition, results of operations and liquidity.”

Accounts receivable due from third parties increased from RMB8.0 million as of December 31, 2008 to RMB236.8 million (US$34.7 million) as of December 31, 2009, because we have begun to extend up to 30 or 45 days of payment terms to customers with strong credit worthiness, and no longer require that all silicon wafer customers make payment in full prior to delivery. Inventories decreased from RMB272.0 million as of

 

106


Table of Contents

December 31, 2008 to RMB245.2 million (US$35.9 million) as of December 31, 2009 as a result of increase in sales and decrease in unit costs of silicon materials.

Accounts payable increased from RMB24.0 million as of December 31, 2008 to RMB100.0 million (US$14.6 million) as of December 31, 2009 in line with the expansion of our business. The increase in the accounts payable was also partially because we started to pay our suppliers of consumables on credit terms. Notes payable increased from nil as of December 31, 2008 to RMB81.6 million (US$12.0 million) as of December 31, 2009 as we issued bank acceptance notes to our suppliers mainly for purchase of raw materials in 2009. Other payables and accruals due to third parties increased from RMB83.0 million as of December 31, 2008 to RMB116.8 million (US$17.1 million) as of December 31, 2009, consisting mainly of payables for property, plant and equipment and accrued costs in relation to this offering.

The following summary of our cash flows for the years ended December 31, 2007, 2008 and 2009 has been derived from our audited consolidated financial statements, which are included elsewhere in this prospectus. Our cash flows for the years ended December 31, 2007 and 2008 included the cash flows of Jiangxi Desun, Xinwei and the VIEs until the respective dates of deconsolidation.

 

    Year Ended December 31,     Year Ended
December 31,
 
    2007     2008     2009  
    (RMB)     (RMB)     (RMB)     (US$)  
    (in thousands)  

Net cash (used in)/provided by operating activities

  3,541.4      (243,828.5   (76,296.8   (11,177.5

Net cash used in investing activities

  (167,973.6   (333,753.0   (400,157.1   (58,623.3

Net cash provided by financing activities

  183,248.8      581,520.7      601,288.9      88,089.3   

Cash, beginning of year

  8,508.0      27,242.2      27,323.6      4,002.9   

Cash, end of year

  27,242.2      27,323.6      152,479.6      22,338.4   

Operating Activities

Net cash used in operating activities for the year ended December 31, 2009 was RMB76.3 million (US$11.2 million), consisting primarily of (i) increase in accounts receivable of RMB143.6 million (US$21.0 million), (ii) decrease in advances from third party customers of RMB139.6 million (US$20.4 million) and (iii) increase in prepayments and other current assets of RMB76.8 million (US$11.3 million), partially offset by (i) net income of RMB85.4 million (US$12.5 million), adding back the non-cash charges relating to change in fair value of derivatives recognized in earnings of RMB13.6 million (US$2.0 million) and the non-cash compensation expenses of RMB20.9 million (US$3.1 million) recognized as the result of the June 2009 Modification and September 2009 Modification, (ii) increase in accounts payable of RMB66.5 million (US$9.7 million) and (iii) depreciation of property, plant and equipment of RMB43.8 million (US$6.4 million).

Net cash used in operating activities for the year ended December 31, 2008 was RMB243.8 million, reflecting the rapid growth of our business and the corresponding demand on working capital, consisting primarily of (i) increase in inventories of RMB249.2 million as we increased our inventories to meet production output, (ii) increase in advance to suppliers of RMB222.4 million to secure raw materials for our increased production output, (iii) decrease in advances from a related party of RMB92.4 million because we delivered several shipments to a subsidiary of ReneSola, which offset the advances, and (iv) increase in accounts receivables of RMB90.4 million because we started to sell products to our customers on credit terms, partially offset by (i) decrease in other receivables from related parties of RMB48.5 million, (ii) increase in advances from third party customers of RMB22.7 million, (iii) increase in other payables and accruals of RMB33.4 million, and (iv) net income of RMB219.3 million, adding back the non-cash charges relating to change in fair value of derivatives recognized in earnings of RMB29.8 million.

Net cash provided by operating activities for the year ended December 31, 2007 was RMB3.5 million, consisting primarily of (i) increase in advances from third party customers of RMB162.0 million as we increased

 

107


Table of Contents

sales to third-party customers, (ii) net income of RMB76.0 million, (iii) increase in advances from a related party of RMB42.6 million and (iv) increase in accounts payable of RMB10.7 million, partially offset by (i) increase in inventories of RMB162.7 million as we increased our inventories to meet production output, (ii) increase in advances to suppliers of RMB118.7 million to secure raw materials for our increased production output and (iii) increase in prepayments and other current assets of RMB28.4 million, including advances to employees for their travel expenses, loans receivables and prepaid rent and other prepayments.

Investing Activities

Net cash used in investing activities for the year ended December 31, 2009 was RMB400.2 million (US$58.6 million), consisting primarily of (i) purchase of property, plant and equipment and land use rights of RMB285.3 million (US$41.8 million), (ii) net cash paid for our acquisition of Zhejiang Jinko of RMB69.2 million (US$10.1 million) after deduction of Zhejiang Jinko’s cash balance, and (iii) cash paid for short-term investment of RMB50.4 million (US$7.4 million), which mainly represented bank time deposits pledged to banks as collateral for issuance of bank acceptance notes for purchase of raw materials.

Net cash used in investing activities for the year ended December 31, 2008 was RMB333.8 million, consisting primarily of (i) purchase of property, plant and equipment of RMB319.2 million, (ii) purchase of land use rights of RMB98.9 million, (iii) cash outflow from deconsolidation of VIEs of RMB13.3 million and (iv) increase in restricted cash of RMB9.7 million, partially offset by cash received from disposal of our equity interest in Jiangxi Desun of RMB92.0 million.

Net cash used in investing activities for the year ended December 31, 2007 amounted to RMB168.0 million, consisting primarily of the purchases of property and equipment as well as of land use rights in line with our capacity expansion plan during these periods.

Financing Activities

Net cash provided by financing activities for the year ended December 31, 2009 was RMB601.3 million (US$88.1 million), consisting primarily of borrowings from third parties of RMB1,295.0 million (US$189.7 million), partially offset by repayment of borrowings to third parties of RMB681.7 million (US$99.9 million).

Net cash provided by financing activities for the year ended December 31, 2008 was RMB581.5 million, consisting primarily of (i) net proceeds from issuance of series A redeemable convertible preferred shares of RMB163.5 million, (ii) net proceeds from issuance of series B redeemable convertible preferred shares of RMB235.4 million and (iii) cash from borrowings from third parties of RMB298.7 million, partially offset by (i) repayments of borrowings to third parties of RMB111.2 million and (ii) repayment of borrowings to related parties of RMB10.1 million.

Net cash provided by financing activities for the year ended December 31, 2007 was RMB183.2 million, consisting primarily of (i) proceeds from issuance of ordinary shares and capital injection from shareholders and VIE shareholders totaling RMB153.6 million, (ii) cash from borrowings from third parties of RMB23.0 million, and (iii) cash from borrowings from related parties of RMB9.2 million, partially offset by (i) repayments of borrowings to related parties of RMB1.6 million and (ii) repayment of borrowings to third parties of RMB1.0 million.

Acquisition of Zhejiang Jinko

In June 2009, we acquired 100% equity interest in Zhejiang Jinko for a total consideration of approximately RMB100 million (US$14.6 million). The acquisition was consummated on June 30, 2009. Consequently, we consolidated the financial statements of Zhejiang Jinko starting from June 30, 2009. Zhejiang Jinko was established in August 2006 and is a manufacturer of solar cells. This acquisition has allowed us to expand our

 

108


Table of Contents

business to manufacturing of solar cells. The purchase consideration for acquisition of Zhejiang Jinko was fully paid in October 2009.

Capital Expenditures

We had capital expenditures of RMB154.1 million, RMB418.1 million and RMB285.3 million (US$41.8 million) for the years ended December 31, 2007, 2008 and 2009, respectively. Our capital expenditures were used primarily to build our silicon wafer and ingot manufacturing plant, purchase production equipment and acquire land use rights, and for the net cash paid for the acquisition of Zhejiang Jinko.

We expect to continue investing in capital expenditures in the future as we implement a business expansion program to capture what we believe to be an attractive market opportunity for solar power products and prudently invest in the coordinated expansion of our production capacity of silicon ingots, silicon wafers, solar cells and solar modules so as to achieve rapid and sustained growth of our vertically integrated production capacity. We expect that our capital expenditures for 2010 will be approximately RMB690 million, which will be used primarily to purchase silicon ingot, silicon wafer, solar cell and solar module manufacturing equipment and build manufacturing facilities. We plan to expand our annual silicon wafer and solar module production capacity to approximately 500 MW each and annual solar cell production capacity to approximately 400 MW by the end of 2010.

We will seek to optimize our capital structure to finance our capital expenditures in the most efficient manner and to prudently maximize shareholder return. In that connection, we will manage our use of equity and debt financing from various sources, including the net proceeds from this offering as well as loans from commercial banks, to fund capital expenditures. We expect that the anticipated net proceeds from this offering, either alone or in conjunction with bank loans, will be sufficient to procure all additional equipment necessary to implement our expansion plan.

We believe that available credit under existing bank credit facilities, the proceeds of this offering, as well as cash on hand and operating cash flow, will be sufficient to meet our anticipated cash needs, including our cash needs for working capital and capital expenditures for the next 12 months. We may, however, require additional cash due to changing business conditions or other future developments, including any investments or acquisitions we have decided or may decide to pursue. If our existing cash is insufficient to meet our requirements, we may seek to sell additional equity securities, debt securities or borrow from lending institutions.

Contractual Obligations and Commercial Commitments

The following table sets forth our contractual obligations as of December 31, 2009:

 

     Payment Due by Period
     Total    Less than 1 Year    1 to 3 Years    3 to 5 Years    More than 5 Years
     (RMB in thousands)

Purchase obligations relating to machinery and equipment

   189,068.6    189,068.6    —      —      —  

Payment obligations under long-term supply agreements

   587,225.2    7,283.4    142,861.1    137,398.6    299,682.1

Short-term bank borrowings

   516,084.0    516,084.0    —      —      —  

Long-term borrowings

   410,000.0    60,000.0    350,000.0    —      —  

Payment obligations under capital lease agreements

   3,692.2    3,692.2    —      —      —  

Payment obligations for operating leases

   14,245.1    4,016.8    4,726.8    2,200.6    3,300.9
                        

Total

   1,720,315.1    780,145.0    497,587.9    139,599.2    302,983.0
                        

 

109


Table of Contents

Deemed Dividend

In connection with the June 2009 Modification, we recognized a non-cash deemed dividend of RMB8.0 million (US$1.2 million) to Flagship, one of the holders of our series A redeemable convertible preferred shares. For details of the June 2009 Modification, see “Description of Share Capital — History of Share Issuances and Other Financings — June 2009 Modification.”

Off-balance Sheet Commitments and Arrangements

Jiangxi Jinko entered into a guarantee agreement with Industrial Bank Co., Ltd., Nanchang Branch, or Nanchang Industrial Bank, pursuant to which Jiangxi Jinko became jointly liable with Jiangxi Desun for Jiangxi Desun’s obligations to repay a RMB11.0 million (US$1.6 million) short-term bank borrowing due on March 28, 2009, as well as other expenses the lender may incur for collection of any amount overdue. As of December 31, 2009, such guarantee had been released. On June 13, 2009, Jiangxi Jinko entered into the Heji Loan Agreement with Heji Investment for loans with an aggregate principal amount of up to RMB100 million with a term of three years. We borrowed RMB50.0 million from Heji Investment under the Heji Loan Agreement. In September and October 2009, we and Heji Investment re-arranged our borrowings under the Heji Loan Agreement into entrusted loans with an aggregate principal amount of RMB50.0 million through Agricultural Bank of China. In connection with the Heji Loan Agreement, Heji Investment required Jiangxi Jinko to enter into a guarantee agreement with JITCL on May 31, 2009 for Heji Investment’s own payment obligations under its separate entrusted loan agreement with JITCL, under which JITCL extended a loan to Heji Investment in the principal amount of RMB50 million for a term of three years.

Before our acquisition of Zhejiang Jinko, Zhejiang Jinko had entered into the following guarantee agreements to guarantee the repayment obligations of third parties under their respective loan agreements:

 

   

On June 2, 2008, Zhejiang Jinko entered into a guarantee agreement with Industrial and Commercial Bank of China, Haining Branch, or Haining ICBC, pursuant to which Zhejiang Jinko became jointly liable with Zhejiang Jeans for Zhejiang Jean’s obligations to repay a long-term bank borrowing of up to RMB30 million (US$4.4 million) due on June 30, 2009. Zhejiang Jinko’s obligation under the guarantee agreement will expire on the second anniversary of the maturity of the loan. As of the date of this prospectus, such guarantee has been released.

 

   

On June 27, 2008, Zhejiang Jinko entered into a guarantee agreement with Haining Farmers Credit Association, pursuant to which Zhejiang Jinko became jointly liable with Haining Hongyang Group Co., Ltd. or Haining Hongyang, for Haining Hongyang’s obligations to repay a long-term loan of up to RMB20 million with Haining Farmers Credit Association due on December 10, 2009. Zhejiang Jinko’s obligation under the guarantee agreement will expire on the second anniversary of the maturity of the loan. As of the date of this prospectus, no amount is outstanding under this loan agreement.

 

   

On April 17, 2008, Zhejiang Jinko entered into a maximum guarantee agreement with Shanghai Pudong Development Bank, pursuant to which Zhejiang Jinko became jointly liable with Zhejiang Jeans for Zhejiang Jeans’ repayment obligations under a bank facility of up to RMB20 million from Shanghai Pudong Development Bank due on December 31, 2009. Zhejiang Jinko’s obligation under the guarantee agreement will expire upon the second anniversary of the maturity of each loan under this bank facility. As of the date of this prospectus, such guarantee had been released.

 

   

On February 17, 2009, Zhejiang Jinko entered into a guarantee agreement with Jiaxing Commercial Bank, Haining Branch, or Jiaxing Commercial Bank, pursuant to which Zhejiang Jinko became jointly liable with Zhejiang Jeans Industry Co., Ltd. or Zhejiang Jeans, for Zhejiang Jean’s obligations to repay up to RMB3.35 million under a bank acceptance bill with Jiaxing Commercial Bank. As of the date of this prospectus, no amount is outstanding under the bank acceptance bill.

 

   

On June 5, 2009, Zhejiang Jinko entered into a guarantee agreement with Jiaxing Commercial Bank, pursuant to which Zhejiang Jinko became jointly liable with Zhejiang Jeans for Zhejiang Jean’s

 

110


Table of Contents
 

obligations to repay up to RMB5.00 million under a bank acceptance bill with Jiaxing Commercial Bank. As of the date of this prospectus, no amount is outstanding under the bank acceptance bill.

We have no other outstanding financial guarantees or other commitments to guarantee the payment obligations of our related parties. We have not entered into any derivative contracts that are indexed to our shares and classified as shareholder’s equity or that are not reflected in our consolidated financial statements. Furthermore, we do not have any retained or contingent interest in assets transferred to an unconsolidated entity that serves as credit, liquidity or market risk support to such entity. We do not have any variable interest in any unconsolidated entity that provides financing, liquidity, market risk or credit support to us or that engages in leasing, hedging or research and development services with us. We have not entered into nor do we expect to enter into any off-balance sheet arrangements.

Inflation

Since our inception, inflation in China has not materially impacted our operations. The consumer price index in China increased 4.8% and 5.9% for years ended December 31, 2007 and 2008 respectively and decreased 0.7% for year ended December 31, 2009, according to the National Bureau of Statistics of China. Inflation could affect our business in the future by, among other things, increasing the cost of our production inputs and borrowing costs, and affecting the value of financial instruments.

Quantitative and Qualitative Disclosures about Market Risks

Commodity Price Risk

The major raw materials used in the production of our products include virgin polysilicon and recoverable silicon materials. Our average purchase price of recoverable silicon materials increased by 53.9% from 2007 to 2008 and decreased by 76.7% from 2008 to 2009. Our average purchase price of virgin polysilicon decreased by 14.7% from 2007 to 2008 and by 72.4% from 2008 to 2009. Our financial performance is affected by fluctuations in the prices of these raw materials, which are influenced by global as well as regional supply and demand conditions. Up to mid-2008, an industry-wide shortage of virgin polysilicon which is the basic raw material for all crystalline silicon solar power products and semiconductor devices, coupled with rapidly growing demand from the solar power industry, caused rapid escalation of virgin polysilicon prices and an industry-wide silicon shortage. However, in the second half of 2008 and first half of 2009, industry demand for solar power products was seriously affected by the global recession and credit market contraction. According to Solarbuzz, weakened polysilicon demand from the semiconductor industry beginning in the third quarter of 2008 caused polysilicon manufacturers to become increasingly dependent on demand from the solar industry in 2008 and through the first half of 2009 as the global recession continued. At the same time, global silicon feedstock manufacturing capacity experienced a significant expansion in 2008 as a result of increases in capacity by polysilicon manufacturers. By the fourth quarter of 2008, declines in both solar and semiconductor markets led to significantly reduced demand for polysilicon feedstock. As a result, the market prices of virgin polysilicon and downstream solar power products were further depressed. Because recoverable silicon materials are used as a substitute for virgin polysilicon and such materials require processing before they are suitable for use in the production process, prices of recoverable silicon materials, which are generally priced at a discount to virgin polysilicon, also declined in the fourth quarter of 2008 and the first half of 2009. However, since the second half of 2009, the prices of both virgin polysilicon and recoverable silicon materials have substantially stabilized.

In addition, we have entered into a long-term virgin polysilicon supply agreement with Hoku with a total purchase price of US$106 million for virgin polysilicon to be delivered from 2010 to 2019. Prices under this contract are fixed for the contract term. As a result, we are exposed to the risk that future spot market prices of virgin polysilicon may fall below the contract prices. The average of the contract prices under the supply contract with Hoku over the term of the contract is above the April 2010 spot market index price as reflected in the PCSPI. We historically have not entered into any commodity derivative instruments to hedge the potential

 

111


Table of Contents

commodity price changes. Moreover, our greater reliance on virgin polysilicon in the future may increase our costs compared to what such costs would have been had we maintained our historical proportions of recovered silicon materials to virgin polysilicon.

Foreign Exchange Risk

Our sales in China are denominated in Renminbi and our costs and capital expenditures are also largely denominated in Renminbi. Our export sales are generally denominated in U.S. dollars and we also incur expenses in foreign currencies, including U.S. dollars, Japanese Yen and Euros, in relation to the procurement of silicon materials, equipment and consumables such as crucibles. In addition, we have outstanding debt obligation, and may continue to incur debts from time to time, denominated and repayable in foreign currencies. Accordingly, any significant fluctuations between the Renminbi and the U.S. dollar and other foreign currencies including Japanese Yen and Euro could expose us to foreign exchange risk. In addition, as we expand our sales to overseas markets, we expect our foreign exchange exposures will increase. We do not currently hedge our exchange rate exposure. We cannot predict the impact of future exchange rate fluctuations on our results of operations and may incur net foreign currency losses in the future. In addition, we make advance payments in U.S. dollars to overseas silicon raw material suppliers, and from time to time, we may incur foreign exchange losses if we request our suppliers to return such advance payments due to changes in our business plans. In 2008, we incurred foreign exchange losses of approximately RMB5.0 million as one third-party supplier returned our U.S. dollar advance payments which depreciated against the Renminbi in 2008. We evaluate such risk from time to time and may consider engaging in hedging activities in the future to the extent we deem appropriate. Such hedging arrangements may require us to pledge or transfer cash and other collateral to secure our obligations under the agreements, and the amount of collateral required may increase as a result of market-to-market adjustments.

As a result, the value of your investment in our ADSs will be affected by the foreign exchange rate between U.S. dollars and Renminbi. To the extent we hold assets denominated in U.S. dollars, including the net proceeds to us from this offering, any appreciation of the Renminbi against the U.S. dollar could result in a change to our statement of operations and a reduction in the value of our U.S. dollar denominated assets. On the other hand, a decline in the value of the Renminbi against the U.S. dollar could reduce the U.S. dollar equivalent amounts of our financial results, the value of your investment in our company and the dividends we may pay in the future, if any, all of which may have a material adverse effect on the prices of ADSs.

Interest Rate Risk

Our exposure to interest rate risks relates to interest expenses incurred in connection with our short-term and long-term borrowings, and interest income generated by excess cash invested in demand deposits and liquid investments with original maturities of three months or less. As of December 31, 2009, our total outstanding interest-bearing RMB-denominated borrowings were RMB900.9 million (US$132.0 million) with a weighted average interest rate of 5.2% per annum. In addition, as of December 31, 2009, we had outstanding short-term loans of RMB25.2 million denominated and payable in Euro with a weighted average interest rate of 2.23% per annum. We have not used any derivative financial instruments to manage our interest rate risk exposure due to lack of such financial instruments in China. Historically, we have not been exposed to material risks due to changes in interest rates; however, our future interest income may decrease or interest expenses on our borrowings may increase due to changes in market interest rates. We are currently not engaged in any interest rate hedging activities.

Recent Accounting Pronouncements

Recent accounting pronouncements

In June 2009, the FASB revised the existing guidance on the accounting for transfers and servicing of financial assets and extinguishments of liabilities. The revision requires more information about transfers of

 

112


Table of Contents

financial assets, including securitization transactions, and where entities have continuing exposure to the risks related to transferred financial assets. It eliminates the concept of a “qualifying special-purpose entity,” changes the requirements for derecognizing financial assets, and requires additional disclosures. The revision will be effective at the start of a reporting entity’s first fiscal year beginning after November 15, 2009. We do not believe the adoption of this revision to the existing guidance on the accounting for transfers and servicing of financial assets and extinguishments of liabilities will have a material impact on our consolidated financial statements.

In June 2009, the FASB issued a revision to the existing guidance on consolidation of variable interest entities, which requires an analysis to determine whether a variable interest gives the entity a controlling financial interest in a variable interest entity. This statement requires an ongoing reassessment and eliminates the quantitative approach previously required for determining whether an entity is the primary beneficiary. The new guidance will be effective at the start of a reporting entity’s first fiscal year beginning after November 15, 2009. We do not believe the adoption of the revised standard on the consolidation of variable interest entities will have a material impact on our consolidated financial statements.

 

113


Table of Contents

OUR INDUSTRY

Introduction

Solar power has emerged as one of the most rapidly growing renewable energy sources. Through a process known as the photovoltaic, or PV, effect, electricity is generated by solar cells that convert sunlight into electricity. In general, global solar cell production can be categorized by three different types of technologies, namely, monocrystalline silicon, multicrystalline silicon and thin film technologies. Crystalline silicon technology is currently the most commonly used, accounting for 81.8% of solar cell production in 2009, according to Solarbuzz, an independent international solar energy consulting company, compared to 18.2% for thin-film-based solar cells.

Although PV technology has been used for several decades, the solar power market grew significantly only in the past several years. According to Solarbuzz, the world PV market, defined as relating to the total MW of modules delivered to installation sites, grew from 6,080 MW in 2008 to 7,300 MW in 2009, an increase of over 20%, while annual growth has averaged a compound rate of 50% over the last five years from 1,460 MW in 2005 to 7,300 MW in 2009. According to Solarbuzz, under the “Balanced Energy” forecast scenario, the lowest of three forecast scenarios, the world PV market is expected to reach 8,440 MW in 2010. Solarbuzz also expects the world PV market to reach 15,380 MW in 2014, representing a CAGR of 16.2% from 2010 to 2014.

LOGO

 

Source:   Solarbuzz, 2008, 2009 and 2010.

Key Growth Drivers

We believe the following factors have driven and will continue to drive the growth of the solar power industry:

Advantages of Solar Power

Solar power has several advantages over both conventional and other forms of renewable energy:

 

   

Reduced Dependence on Finite Conventional Energy Sources.  As existing conventional reserves become depleted or exhausted, the prices of conventional energy sources, such as oil, gas and coal, continue to rise. Unlike these fossil fuels, solar energy has no fuel price volatility or supply constraints. In addition, because solar power relies solely on sunlight, it does not present similar delivery risks associated with fossil or nuclear fuels. Although the amount and timing of sunlight varies over the day, season and year, a properly sized and configured system can be designed for high reliability while supplying electricity on a long-term, fixed-cost basis.

 

114


Table of Contents
   

Environmental Friendliness.  As one of the cleanest sources of energy, solar power can generate electricity without air or water emissions, noise, vibration or waste generation.

 

   

Peak Energy Use Advantage.  Solar power is well-suited to match peak energy needs, such as when electricity demand peaks in the summer during maximum sunlight hours. In addition, unlike hydroelectric and wind power, solar power is not restricted by seasonal availability.

 

   

Modularity, Scalability and Flexible Location.  As the size and generating capacity of a solar system are a function of the number of solar modules installed, solar power products can be deployed in many different sizes and configurations to meet specific customer needs. Moreover, unlike other renewable energy sources such as hydroelectric and wind power, solar power can be installed and utilized wherever there is sunlight and directly where the power will be used. As a result, solar power limits the costs of and energy losses associated with transmission and distribution from large-scale electric plants to end users.

 

   

Reliability and Durability.  Without moving parts and the need for regular maintenance, solar power systems are among the most reliable and durable forms of electricity generation. Accelerated aging tests have shown that solar modules can operate for at least 25 to 30 years without requiring major maintenance.

Long-term Growth in Demand for Alternative Sources of Energy

Prior to mid-2008, global economic development resulted in strong energy demand, while depletion of fossil fuel reserves and escalating electricity consumption caused wholesale electricity prices to rise significantly. This resulted in higher electricity costs for consumers and highlighted the need to develop technologies for reliable and sustainable electricity generation. Solar power offers an attractive means of power generation without relying extensively on fossil fuel reserves, and has become a rapidly growing source of renewable energy compared to other sources such as biomass, geothermal, hydroelectric, nuclear and wind power generation. We expect the importance of solar power as a common alternative energy source for global energy consumption to continue to increase rapidly in the long term despite the contraction in demand resulting from the recent global recession and credit market contraction in the second half of 2008 and the first half of 2009.

Government Incentives for Solar Power

The use of solar power has continued to grow in countries where governments have implemented renewable energy policies and incentives to encourage the use and accelerate the development of solar power and other renewable energy sources. For example, countries such as Australia, China, Germany, Japan, South Korea, Spain and the United States have offered various types of financial incentives in the form of capital cost subsidies, feed-in tariffs, net metering, tax credits and other incentives to end-users, distributors, system integrators and manufacturers of solar power products. International environmental protection initiatives, such as the Kyoto Protocol for the reduction of overall carbon dioxide and other gas emissions, have also created momentum for government incentives encouraging solar power and other renewable energy sources.

 

115


Table of Contents

The following table sets forth a summary of recent changes in the key government incentive programs of selected PV markets:

 

Country

  

2009 PV
Market(1)

   Change in 2009
market
compared to 2008
market(1)
   

Incentive programs

Australia

   72 MW    213.0  

Ÿsolar energy programs, which offered rebates and subsidies for the installation of residential and rural PV systems, through June 2009

Ÿimplementation in 2009 of the Solar Credits program that offers a market-based subsidy for PV systems to a broader pool of eligible applicants

Ÿvarious gross and net feed-in tariff systems as well as net metering systems at the state level

China

   208 MW    494.3  

Ÿnational and regional subsidy programs consisting of rebates, tax incentives and soft loans

Ÿexperimentation with a limited feed-in tariff system

Germany

   3,870 MW    108.6  

Ÿadoption of a feed-in tariff system in 2000 with feed-in tariff rates that declined annually according to a schedule subject to adjustments to achieve target growth rates

Ÿintroduction in January 2009 of faster tariff decline rates and a flexible tariff system linking feed-in tariff rates to the achievement of certain market targets

Ÿannouncement of a one-time reduction of 11% to 16% to feed-in tariff rates and the abolishment of funding for certain types of PV systems, which become effective in July 2010

Japan

   477 MW    107.4  

Ÿreinstatement of a subsidy for residential PV system installations in January 2009

 

Ÿintroduction of a 10-year net feed-in tariff system in November 2009

South Korea

   98 MW    -65.0  

Ÿdownward adjustment of feed-in tariff rates to reflect lower installed system cost and increase in the installation cap for the period from 2008 to 2011 to 500 MW

Ÿimplementation of annual installation caps for 2009, 2010 and 2011 together with a reduction of feed-in tariff rates

Spain

   98 MW    -96.0  

Ÿimplementation of significant policy and regulations changes, which consist of feed-in tariff rate reductions and installation caps, in September 2008

Ÿannouncement that feed-in tariff rates will be reduced by as much as 25% without specifying the time such reduction will become effective

United States

   485 MW    35.9  

Ÿeight-year extension of a federal tax credit program that was set to expire at the end of 2008

Ÿintroduction of a grant program under the American Recovery and Reinvestment Act and a loan guarantee program in 2009

Ÿallocation of federal funding to states, including California and New Jersey that already had material state subsidy programs, to carry out their clean energy programs

 

(1)   Source: Solarbuzz, 2009 and 2010.

 

116


Table of Contents

To promote the use of renewable energy in China, the PRC government enacted Article 14 of the PRC Renewable Energy Law, which became effective on January 1, 2006, and was revised on December 26, 2009 to require power grid companies to purchase all the power produced by renewable energy generators or face a fine. In addition, to support the demonstration and the promotion of solar power application in China, the Ministry of Finance promulgated the Interim Measures for Administration of Government Subsidy Fund for Application of Solar Power Technology in Building Construction, or Interim Measures, on March 23, 2009. Under these Interim Measures, the subsidy which is set at RMB20.0 per kWp for 2009 covers solar power technology application integrated into building constructions.

On July 16, 2009, China’s Ministry of Finance, Ministry of Science and Technology and Resource Bureau of the National Development and Reform Commission jointly published an announcement containing the guidelines for the “Golden Sun” demonstration program. Under the program, the PRC government will provide up to 20 MW of PV projects per province with a 50% - 70% subsidy for the capital costs of PV systems and the relevant power transmission and distribution systems, with the aim to industrialize and expand the scale of China’s solar power industry. The program further provides that each PV project must have a minimum capacity of 300 kWp and be completed within one year with an operation term of not less than 20 years.

Nonetheless, the lack of implementation details for recent incentive schemes released by PRC government authorities may cause demand for PV products, including our products, not to grow as rapidly as we expect, if at all. In addition, political changes in a particular country could result in significant reductions or eliminations of subsidies or economic incentives, and the effects of the recent global financial crisis may affect the fiscal ability of governments to offer certain types of incentives, such as tax credits. A significant reduction in the scope or discontinuation of government incentive programs, especially those in China and our target overseas markets, could cause demand for our products and our revenues to decline, and have a material adverse effect on our business, financial condition, results of operations and prospects.

Decreasing Costs of Solar Energy

Solar energy has become an attractive alternative energy source because of narrowing cost differentials between solar energy and conventional energy sources due to market-wide decreases in the average selling prices for solar power products driven by lower raw materials costs and increased production efficiencies. According to the Solarbuzz “Balanced Energy” forecast scenario, the lowest of three different scenarios, the average price of PV modules is expected to decrease from US$2.52 per watt in 2009 to US$1.52 per watt in 2014. In addition, the recent sharp declines in market prices of polysilicon, a key raw material in crystalline silicon-based solar power products, have made crystalline silicon technology more competitive than technologies that are less dependent on polysilicon, such as thin film.

Key Challenges for the Solar Power Industry

In spite of the benefits of solar power, the industry must overcome the following challenges to achieve widespread commercialization and use.

High Cost of Solar Power Compared with Other Sources of Energy

Despite rising costs of conventional energy sources and declining costs of generating electricity through photovoltaic means in recent years, solar power generation is still more expensive compared to conventional power generation. To address this issue, the solar power industry must seek to reduce the price per watt of solar energy for the consumer by lowering manufacturing and installation costs and finding ways to increase the conversion efficiency rate of solar power products. We believe that, as the gap narrows between the cost of electricity generated from solar power products and the cost of electricity purchased from conventional energy sources, solar power will become increasingly attractive to consumers and demand for solar power will increase in the future.

 

117


Table of Contents

Lack of Financing for Solar Power Projects

The global recession and credit market contraction in the second half of 2008 and first half of 2009, which have led to weak consumer confidence, diminished consumer and commercial spending and credit market contraction due to lack of liquidity, have had a significant negative impact on industries that are capital-intensive and highly dependent on investments, including the solar power industry. Many solar power companies, particularly those down the solar power value chain, have experienced difficulties in obtaining cost-effective financing for the capital expenditure and working capital needs of their operations and large-scale project installations. The lack or increased costs of financing has resulted in cancellations, postponements or significant scale-backs of a number of solar power projects, which in turn has had an adverse impact on demand for solar power products. A protracted disruption in the ability of solar power companies to access financing at affordable rates or at all may continue to slow down the growth of the solar power industry.

Continuing Reliance on Government Subsidies and Incentives

The current growth of the solar power industry substantially relies on the availability and size of government subsidies and economic incentives in the form of capital cost rebates, direct subsidies to end users, reduced tariffs, low interest financing loans and tax credits, net metering and other incentives. Governments may eventually decide to reduce or eliminate these subsidies and economic incentives. For instance, the governments of Spain and Germany have decided to significantly reduce the feed-in tariffs available to solar power projects. The uncertainty of such decisions, as well as the possible elimination of favorable policies, may make it difficult for some solar companies to plan future projects, which may not be financially feasible without such incentives. As such, it remains a challenge for the solar power industry to reach sufficient scale to be cost-effective in a non-subsidized marketplace.

Need to Promote Awareness and Acceptance of Solar Power Usage

Increasing promotion efforts for solar power products are needed to increase customers’ awareness and acceptance of solar power through implementation of innovative technologies and designs to make solar power systems suitable for commercial and residential users.

Recent Trends in Solar Power Product Prices

Up to mid-2008, an industry-wide shortage of virgin polysilicon, the basic raw material for all crystalline silicon solar power products and semiconductor devices, coupled with rapidly growing demand from both the solar power industry and the semiconductor industry, caused rapid escalation of virgin polysilicon prices. This rise in polysilicon costs had created strong incentives for producers of solar power products to enter into long-term polysilicon supply contracts, and to seek alternative sources of silicon, such as recoverable silicon materials, to mitigate polysilicon price and supply risk. Because prices for silicon wafers, solar cells and solar modules, as well as intermediate products such as recovered silicon materials and silicon ingots, are affected by the price of polysilicon, during the same period the prices of silicon wafers and intermediate products such as recovered silicon and silicon ingots also rose strongly.

However, in the second half of 2008 and the first half of 2009, industry demand was seriously affected by the global recession and credit market contraction. According to Solarbuzz, weakened polysilicon demand from the semiconductor industry beginning in the third quarter of 2008 caused polysilicon manufacturers to become increasingly dependent on demand from the solar industry in 2008 and through the first half of 2009 as the global recession continued. At the same time, global silicon feedstock manufacturing capacity experienced a significant expansion in 2008 as a result of increases in capacity by polysilicon manufacturers, which further reduced the market prices of virgin polysilicon and downstream solar power products. Solarbuzz indicates that the number of silicon feedstock manufacturers increased from 38 companies in 2007 to 56 companies in 2008 and further to 71 companies in 2009. By the fourth quarter of 2008, declines in both solar and semiconductor markets led to

 

118


Table of Contents

significantly reduced demand for silicon feedstock. As a result, the market prices of virgin polysilicon and downstream solar power products were further depressed. Similarly, the prices of silicon wafers, solar cells and solar modules, as well as intermediate products likewise fell significantly. The sharp fall in prices throughout the polysilicon-based solar power value chain caused solar power companies to seek price reductions in their inputs to manage pressures on their margins. The result was widespread renegotiation of long-term supply contracts to amend prices and volumes, or to change fixed price contracts to variable price contracts. In addition, because recoverable silicon materials can be used as a substitute for virgin polysilicon, prices of recoverable silicon materials, which are generally priced at a discount to virgin polysilicon, were also negatively affected.

Despite the contraction in demand for solar power products during the second half of 2008 and the first half of 2009, we believe that demand for solar power products has recovered significantly in response to a series of factors, including the recovery of the global economy and the increasing availability of financing for solar power projects. We believe that such demand will continue to grow rapidly in the long term as solar power becomes an increasingly important source of renewable energy. However, prices of solar power products, including our products, have not increased and may continue to decrease.

The following charts set forth the PCSPI for contract and spot prices of virgin polysilicon from August 2008 to April 2010:

LOGO

 

119


Table of Contents

LOGO

 

Source:   Photon Consulting, LLC — Silicon Price Index, 2010

The Solar Power Value Chain

The crystalline silicon-based solar power manufacturing value chain starts with processing quartz sand to metallurgical-grade silicon. The material is further purified to semiconductor-grade or solar-grade polysilicon feedstock. Recoverable silicon materials acquired from semiconductor and solar power industries, such as integrated circuit scraps, partially-processed and broken silicon wafers, broken solar cells, pot scraps, silicon powder, ingot tops and tails, and other off-cuts, can also be used as feedstock. Most recoverable silicon materials sourced from the semiconductor industry are of higher purity than solar-grade recoverable silicon materials. However, the use of recoverable silicon materials increases the difficulty of producing silicon ingots with quality similar to those made from virgin polysilicon and advanced technologies are required to produce silicon ingots from recovered silicon materials, which comes in varying grades.

Feedstock is melted in high temperature furnaces and is then formed into silicon ingots through a crystallization process. Using less virgin polysilicon and more recovered silicon materials to manufacture ingots results in lower overall cost of raw materials. Silicon ingots are cut into blocks and then further cut into silicon wafers using high precision techniques, such as wire sawing technologies. Silicon wafers are manufactured into solar cells through a multiple step manufacturing process that entails etching, doping, coating and applying electrical contacts. Solar cells are then electrically interconnected and laminated in durable and weather-proof packages to form solar modules, which together with system components such as batteries and inverters, are installed as solar power systems.

The following diagram illustrates the value chain for the manufacture of crystalline silicon-based solar power products:

LOGO

Thin-film technologies have received increasing attention over the last few years due to rising silicon prices. Such technologies require little or no silicon in the production of solar cells and modules and are therefore less susceptible to increases in costs of silicon. Thin-film solar products involve lower production costs and are lighter in weight than crystalline silicon-based solar cells; however, the conversion efficiencies of thin-film based solar cells are comparatively lower.

 

120


Table of Contents

Silicon Wafer Production

There are two primary silicon wafer technologies: monocrystalline silicon technology and multicrystalline silicon technology. Monocrystalline-based solar power products are more expensive to produce than multicrystalline-based solar power products of similar dimensions but achieve higher conversion efficiencies.

 

   

Monocrystalline silicon wafers are produced by cutting monocrystalline silicon ingots. Due to the uniform properties associated with the use of single crystals, the conductivity of electrons in monocrystalline silicon is optimized, thus yielding higher conversion efficiencies. China offers a competitive advantage for monocrystalline wafer production because of low labor and consumable costs.

 

   

Multicrystalline silicon wafers are produced by cutting multicrystalline silicon ingots. Multicrystalline silicon consists of numerous smaller crystals and generally contains more impurities and crystal defects that impede the flow of electrons relative to monocrystalline silicon. While this results in lower energy conversion efficiency, producing multicrystalline- based solar power products involves less labor and lower quality silicon feedstock compared to production of monocrystalline-based solar power products of similar dimensions.

The surface area of silicon wafers is another key factor in determining how much incident light can be absorbed and converted into electricity. To reduce manufacturing costs and increase output, silicon wafer manufacturers strive to reduce the thickness of silicon wafers without reducing the surface area as the production of thinner wafers uses less silicon per unit.

The expansion of manufacturing capacity for silicon wafers depends on secure supply of raw materials and key silicon wafer manufacturing equipment, such as wire saws.

Solar Cell Production

According to Solarbuzz, from 2005 to 2009, crystalline silicon cell manufacturing capacity grew at a compound annual growth rate of 60.2% per year. At the end of 2009, global cell manufacturing capacity reached 16,800 MW, representing an increase of 48% from 2008.

According to Solarbuzz, the global center of cell production has shifted from Japan to China and Taiwan, with China and Taiwan becoming the largest players in global solar cell production in 2009. In addition, PRC and Taiwanese cell manufacturers rose from 44% of global cell production in 2008 to 49% in 2009, ahead of both Europe and Japan. Cell production in China and Taiwan increased to approximately 4,540 MW in 2009 from less than 185 MW in 2005.

LOGO

 

Source:   Solarbuzz, 2010.

 

121


Table of Contents

Solar Module Production

The shift towards increasing manufacturing dominance by China and Taiwan is as evident for modules as it is for wafers and cells, according to Solarbuzz. Global crystalline silicon module manufacturing capacity increased by 71% from 2008 to 21,340 MW in 2009, more than half of which was in China and Taiwan, while Europe, Japan and the United States represented approximately 21%, 4% and 2% of the global crystalline module manufacturing capacity, respectively.

LOGO

 

Source:   Solarbuzz, 2010.

In addition, Solarbuzz data indicate that the conversion efficiency rates for crystalline silicon modules increased by an average of 2.0% per year from 2005 to 2009, with monocrystalline and multicrystalline modules achieving an average conversion efficiency rate of 15.4% and 14.2%, respectively, in 2009.

 

122


Table of Contents

BUSINESS

Overview

We are a fast-growing solar product manufacturer with low-cost operations based in Jiangxi Province and Zhejiang Province in China. We have built a vertically integrated solar product value chain from recovered silicon materials to solar modules. Our current principal products are silicon wafers, solar cells and solar modules. We sell our products in China and to overseas markets.

Based on our significant focus on product quality and cost control and through building strong relationships with customers, suppliers and other industry players, since our inception as a supplier of recovered silicon materials in June 2006, we have rapidly moved downstream by vertically integrating critical stages of the solar power product value chain, including silicon ingots, silicon wafers, solar cells and solar modules, through both organic growth and acquisition.

We currently operate in the following stages of the solar product value chain:

 

   

we process recoverable silicon materials and sell recovered silicon materials to the extent that we do not consume them for our own production;

 

   

we manufacture and sell monocrystalline and multicrystalline silicon ingots and wafers, with an annual silicon wafer production capacity of approximately 300 MW as of March 31, 2010;

 

   

we manufacture and sell solar cells with an annual solar cell production capacity of approximately 200 MW as of March 31, 2010; and

 

   

we manufacture and sell solar modules with an annual solar module production capacity of approximately 200 MW as of March 31, 2010.

We have broadened our customer base since we commenced commercial operations in June 2006 as a recovered silicon material supplier primarily for ReneSola, a leading China-based silicon wafer manufacturer and a related party of ours. As of December 31, 2009 we had an aggregate of more than 440 silicon wafer, solar cell, and solar module customers from China, Hong Kong, Taiwan, the Netherlands, Germany, the United States, India, Belgium, Singapore, Korea, France, Spain and Israel and other countries or regions. To achieve rapid expansion of our sales channels and broad market penetration, we sell our solar modules through overseas subsidiaries and sales agents, to distributors as well as directly to project developers and system integrators. In April 2010, we established a subsidiary in Germany to conduct sales, marketing and brand development for our products in the European market. We intend to establish similar subsidiaries in other major markets to expand our customer base and market penetration.

The global recession and credit market contraction seriously affected the demand for solar power products, including our products, during the second half of 2008 and the first half of 2009. However, since June 2009, the demand for solar power products has significantly recovered in response to a series of factors, including the recovery of the global economy and increasing availability of financing for solar power projects. Although selling prices for solar power products, including the average selling prices of our products, have generally stabilized at levels substantially below pre-crisis prices, there is no assurance that such prices may not decline again. In addition, demand for solar power products is significantly affected by government incentives adopted to make solar power competitive with conventional fossil fuel power. The widespread implementation of such incentive policies, as has occurred in many countries in Europe, Asia Pacific and North America, has significantly stimulated demand, whereas reductions or limitations on such policies, as have recently been announced in Germany, Spain and South Korea, can reduce demand for such products. We believe that demand will continue to grow rapidly as solar power becomes an increasingly important source of renewable energy. To take advantage of the opportunity created by this expected growth, we plan to further increase our annual silicon wafer and solar module production capacity to approximately 500 MW each and annual solar cell production capacity to approximately 400 MW by the end of 2010.

 

123


Table of Contents

We have established our manufacturing bases in Shangrao, Jiangxi Province and Haining, Zhejiang Province to capitalize on the cost advantages offered by Shangrao and Haining in large-scale manufacturing of solar power products. We have established a sales and marketing center in Shanghai because of its convenient location for our customers, suppliers and our sales and marketing teams. We believe that the choice of Shangrao and Haining for our manufacturing bases provides us with convenient and timely access to key resources and conditions as well as our customer base to support our rapid growth and low-cost manufacturing operations. We also believe that our ability to source and process large volumes of recoverable silicon materials provides us with a further cost advantage over competitors who rely primarily on more expensive virgin polysilicon or purchase recovered silicon materials for their production.

We have achieved sustained and profitable growth since our inception in June 2006, although during the year ended December 31, 2009, our sales and net income were materially and adversely affected by the global recession and credit market contraction. Our revenues were RMB116.2 million for the period from June 6, 2006 to December 31, 2006, RMB709.2 million for the year ended December 31, 2007, RMB2,183.6 million for the year ended December 31, 2008 and RMB1,567.9 million (US$229.7 million) for the year ended December 31, 2009, respectively. We recorded a net loss of RMB1.4 million for the period from June 6, 2006 to December 31, 2006. We had net income of RMB76.0 million, RMB218.7 million and RMB85.4 million (US$12.5 million), respectively, for the years ended December 31, 2007, 2008 and 2009.

Our Competitive Strengths

We believe that the following strengths enable us to compete successfully in the solar power industry:

Our ability to provide high-quality products enables us to increase our sales and enhance our brand recognition.

We have made significant efforts to continuously improve the quality of our products. Since we commenced our operation in June 2006 as a recovered silicon material supplier, we have developed substantial expertise in manufacturing solar power products. In addition, we have improved our production equipment, developed proprietary know-how and technology for our production process and implemented strict quality control procedures in our production process. We operate in accordance with ISO 9001 quality management standards and have received TÜV and CE certifications for certain models of our solar modules. The high quality of our silicon wafers has helped us enhance our brand name recognition among our customers and in the industry. We believe that our experience and capability in producing high quality silicon wafers will enable us to provide high quality solar cells and solar modules and further broaden our customer base.

We have been able to build an increasingly diversified customer base.

We have been able to broaden our customer base since we commenced operations in June 2006 as a recovered silicon material supplier primarily for ReneSola, a leading silicon wafer manufacturer and a related party. As of December 31, 2009, we had an aggregate of more than 440 silicon wafer, solar cell and solar module customers from China, Hong Kong, Taiwan, the Netherlands, Germany, the United States, India, Belgium, Singapore, Korea, France, Spain and Israel and other countries or regions. The quality of our products and after-sales services has helped us retain existing customers and develop new customer relationships. In addition, following our acquisition of Zhejiang Jinko, we have successfully integrated the solar cell business, both to support our solar module business and to extend our customer base to solar cell customers. To achieve rapid expansion of our sales channels and broad market penetration, we sell our solar modules through overseas subsidiaries and sales agents, to distributors as well as directly to project developers and system integrators. We have been able to build an expanding customer base for our solar modules with our growing geographical presence in Europe, Asia and North America since we began producing solar modules in August 2009. We have also been able to forge strong relationships with customers through long-term sales contracts. We currently have long-term relationships with four PRC and overseas silicon wafer customers under long-term framework

 

124


Table of Contents

contracts, pursuant to which we have committed to supply an aggregate of approximately 266 MW of silicon wafers over four years from 2010 to 2013. In addition, we have entered into major contracts for the sale of more than 500 MW of solar modules from 2010 to 2012.

Our strategic locations provide us with convenient access to key resources and conditions to support our rapid growth and low-cost manufacturing operations.

We have established our manufacturing bases in Shangrao, Jiangxi Province and Haining, Zhejiang Province and sales and marketing center in Shanghai to capitalize on both the cost advantages offered by Shangrao and Haining as low-cost manufacturing sites as well as the convenience of Shanghai as a commercial center for our customers and suppliers and our sales and marketing teams. We believe that the choice of Shangrao for our manufacturing base to process recovered silicon materials and manufacture silicon ingots, silicon wafers and solar modules which require significant labor, large operating space and significant energy consumption provides us with convenient and timely access to key resources and conditions to support our rapid growth and low-cost manufacturing operations, including low-cost land, labor and utilities, which will become an increasingly important cost advantage as the proportion of silicon materials cost to our total cost of revenue decreases. In addition, as a fast-growing manufacturing company located in the Shangrao Economic Development Zone, we have received support from the local government in terms of, for example, priority supply of electric power and ready access to land in the Economic Development Zone. In November 2008, to support our operations and assure us of priority electricity supply, the Shangrao Economic Development Zone Management Committee and Shangrao County Power Supply Co., Ltd. completed the construction of the first stage of an electric power transformation and distribution substation at our manufacturing site which commenced operation on November 15, 2008. This electric power transformation and distribution substation currently has an annual capacity of 438 million kWh and is expected to provide sufficient power supply to our operation. The close proximity of our facilities in Shangrao to the nearby provinces of Zhejiang and Jiangsu, where many of our customers and suppliers are located, provides convenient and timely access to raw materials and transportation of our products to customers. Our choice of Haining as manufacturing base for solar cells provides us with close proximity to our major customers for solar cells located in the Yangtze River Delta and easy access to research and engineering talents and skilled labor at competitive cost, which is important to our cell manufacturing operations.

Our in-house recoverable silicon material processing operations provide us with a low-cost source for a substantial part of our silicon materials requirements.

Since the commencement of our silicon ingot production in 2007, we have met a significant portion of our silicon material requirements with the recovered silicon materials supplied by our in-house processing operations. Recovered silicon materials cost less than virgin polysilicon. Since inception, we have developed significant expertise and scale in the treatment of recoverable silicon materials. We believe that our proprietary process technologies allow us to process and recover a broad range of recoverable silicon materials, which enable us to reduce our overall silicon raw material costs and achieve a large operating scale. Furthermore, our purchase cost of recoverable silicon materials varies according to projected yields, based on the nature and amount of impurities and the electrical properties of the materials, which helps us make cost-effective use of recoverable silicon materials. We had an annual capacity to process approximately 276 metric tons, 960 metric tons, 1,500 metric tons and 3,000 metric tons of recoverable silicon materials as of December 31, 2006, 2007, 2008 and 2009, respectively. Recoverable silicon materials accounted for 98.6%, 87.0% and 51.4% of our total silicon raw material purchases by value in 2007, 2008 and 2009, respectively. We believe this provides us with a key cost advantage over our competitors who generally use virgin polysilicon, purchase recovered silicon materials, or process recoverable silicon materials on a much smaller scale.

 

125


Table of Contents

Our efficient, state-of-the-art production equipment and proprietary process technologies enable us to enhance our productivity.

We procure our monocrystalline and multicrystalline ingot furnaces, wire saws and other major equipment items including those for production of solar cells and modules from leading PRC and international vendors, including vendors in Japan and the United States. Based on our proprietary know-how and technologies, we have made improvements to equipment purchased from these vendors, including improvements to facilitate the use of our furnace reloading technology and wafer-cutting process technology. Our furnace reloading technology enables us to increase the size of our ingots while lowering our unit production costs by increasing the production output of our furnaces and reducing unit costs of consumables, such as crucibles and argon, and utility costs. We have improved our high-precision wire squarers and squaring techniques, which allows us to reduce the sizes of ingot tops, tails and other off-cuts during the squaring process, thus increasing the sizes of ingot blocks available to be cut into wafers. In addition, we have also improved our wafer cutting wire saws and cutting techniques, which allows us to increase the number of quality conforming wafers produced from each ingot block, produce wafers with thickness of a high degree of consistency and improve the quality of wafers. Our sophisticated wire saws currently enable us to produce monocrystalline wafers with an average thickness of 180 microns and multicrystalline wafers with an average thickness of 200 microns, allowing us to reduce costs of silicon raw materials because less silicon is used to produce each MW of wafer products. In addition, we have developed proprietary process technologies and know-how that allow us to process and recover a broad range of recoverable silicon materials, including those that fall outside the customary range in relation to certain electrical characteristics, while ensuring the consistent quality of our products. We believe our advanced silicon materials recovery processes enable us to further lower our unit production costs.

We use automated production lines to produce solar cells, which enables us to achieve high efficiency and lower our cost. In addition, we have made comprehensive improvements to our solar cell production lines, production process, production management and quality control process, which has improved the conversion efficiency of our solar cells and the percentage of our solar cells that meet our quality criteria.

We use three automated production lines in addition to our four manual production lines for the production of solar modules. Our automated solar module production lines comprise advanced equipment that we have procured from both overseas and domestic vendors, which enables us to reduce human error and labor cost, enhance efficiency and gain a competitive advantage over our competitors which do no use automated production lines.

We are led by a strong management team with demonstrated execution capabilities and ability to adapt to rapidly changing economic conditions.

We have a strong management team led by our chairman Mr. Xiande Li and chief executive officer Mr. Kangping Chen, with proven complementary experience in the solar industry, corporate management and development and execution of growth strategies. Mr. Xiande Li and Mr. Xianhua Li, founders of our company, have an aggregate of more than 14 years of experience in the solar industry. Mr. Kangping Chen has more than 15 years of experience in the management and operation of solar and other manufacturing businesses. Under their leadership, we have been able to quickly expand our business within approximately three years since our inception from processing of recoverable silicon materials in 2006, to production of monocrystalline ingots in 2007 and to production of monocrystalline wafers and multicrystalline ingots and wafers in 2008 and further to solar cells and solar modules in 2009. In addition, members of our management team have also demonstrated their ability to respond to the market changes promptly, which has enabled us to achieve sustained and profitable growth even at a time of economic uncertainty. From 2007 to 2008, our revenue grew by 207.9% while our net income increased by 226.8%. Under the leadership of our management team, we were able to operate profitably in 2009 notwithstanding the adverse impact of the recent global recession and the credit market contraction on our business. We believe that our management team possesses the insight, vision and knowledge required to effectively execute our growth strategy in the face of challenging economic conditions.

 

126


Table of Contents

Our Strategies

In order to achieve our goal of becoming a leading vertically integrated supplier of solar power products, we intend to pursue the following principal strategies:

Further develop our vertically integrated business model.

We plan to continue our efforts to develop our solar cell and solar module business, and become a leading vertically integrated solar product supplier with our products comprising recovered silicon materials, silicon ingots, silicon wafers, solar cells and solar modules. Within approximately four years since our inception, we have developed an integrated production process covering the processing of recovered silicon materials and manufacturing of silicon ingots, silicon wafers, solar cells and solar modules. Through our acquisition of Zhejiang Jinko, we have acquired our solar cell production capacity and an established customer base for solar cells. We commenced producing solar modules in August 2009. We are expanding our solar cell and solar module manufacturing capacity to fully capitalize on the efficiencies of our vertically integrated production process. We believe vertically integrated business model will offer us significant advantages, particularly in areas of cost reduction and quality control, over our competitors that depend on third parties to source core product components.

Continue to prudently invest in the coordinated expansion of our production capacity to achieve rapid and sustained growth and improve our profitability.

Despite the recent contraction in demand for solar power products as a result of the current global recession and credit market contraction, we expect that solar power will continue to grow rapidly as an important source of renewable energy. We intend to take advantage of the opportunity created by this projected growth in demand for solar power and prudently invest in the coordinated expansion of our production capacity of silicon wafers, solar cells and solar modules in order to achieve rapid and sustained growth of our vertically integrated production capacity. In this regard, we increased our annual silicon wafer production capacity to approximately 300 MW as of March 31, 2010 to provide our solar cell and solar module business and silicon wafer customers with high quality silicon wafers with stable performance which are critical components in solar cells and solar modules. We also increased our solar cell and solar module production capacity to approximately 200 MW each as of March 31, 2010 and we plan to further increase the production capacity of our silicon wafers and solar modules to approximately 500 MW each and the production capacity of our solar cells to approximately 400 MW by the end of 2010 to take advantage of a fully integrated growth platform from silicon wafers to solar modules.

Continue to enhance our research and development capability with a focus on improving our manufacturing processes to reduce our average cost and improve the quality of our products.

We believe that the continual improvement of our research and development capability is vital to maintaining our long-term competitiveness. Our research and development laboratory, which is located at our new expansion facilities in the Shangrao Economic Development Zone, focuses on enhancing the quality of our silicon wafers and solar modules, improving production efficiency and increasing the conversion efficiency of our silicon wafers and solar modules. We have entered into a one-year, automatically renewable cooperative agreement with Nanchang University in Jiangxi Province, China and established a joint photovoltaic materials research center on the campus of Nanchang University to focus on the improvement of our manufacturing processes and the research and development of new materials and technologies. The research center also provides on-site technical support to us and training for our employees. The research center has assisted us in improving the quality of our silicon wafer, including the conversion efficiency of our silicon wafers, as well as our silicon wafer production process. We intend to continue to devote management and financial resources to research and development as well as to seek cooperative relationships with academic institutions to further lower our overall production costs, increase the conversion efficiency rates of our solar power products and improve our product quality.

 

127


Table of Contents

Expand our sales and marketing network and enhance our sales and marketing channels both in and outside China.

We have established a sales and marketing center in Shanghai, which provides us with convenient access to domestic and international sales channels due to the concentration of customers in the nearby provinces of Zhejiang and Jiangsu and Shanghai’s position as an international trading hub in China. In addition, on November 25, 2009, in order to facilitate settlement of payments and our overseas sales and marketing efforts, as well as to establish our presence in major overseas markets, we established Jinko Solar International Limited in Hong Kong, an international commercial and financial center with easy access to overseas markets. As the market becomes increasingly competitive, we plan to increase our resources devoted to the expansion of our sales and marketing network and enhancing our sales and marketing channels. As we continue to diversify our product lines, we have successfully expanded our global market footprint. We began exporting a small portion of our products in May 2008 to Hong Kong, and have since expanded our sales to Taiwan, the Netherlands, Germany, the United States, India, Belgium, Singapore, Korea, France, Spain and Israel and other countries and regions. With our entry into the markets for solar cells and modules, we expect to be increasingly able to market our own branded products to end-users. We believe that this will increase recognition of our brand domestically and internationally. In addition, we plan to increase our sales and marketing efforts in strategic markets, such as Europe, Asia and North America to enhance our brand recognition in those markets. In April 2010, we established a subsidiary in Germany to conduct sales, marketing and brand development for our products in the European market. We intend to establish similar subsidiaries in the other major markets to expand our customer base and market penetration. Furthermore, we plan to devote significant resources to developing solar module customers and develop a stable end-user customer base through establishing diversified sales channels comprising project developers, system integrators, distributors and sales agents and diversified marketing activities, including advertising on major industry publications, attending trade shows and exhibits worldwide as well as providing high quality services to our customers.

Diversify and strengthen our customer relationships while securing silicon raw material supplies at competitive cost.

We believe our ability to establish and maintain long-term customer relationships for our silicon wafers, solar cells and solar modules is critical to our continued business development. We seek to enter into long-term sales contracts with flexible price terms with new and existing customers, which we believe will enable us to strengthen our customer relationships and establish a loyal and diversified customer base over time. We also believe that secure and cost-efficient access to silicon raw material supplies is critical to our future success. As such, we intend to further diversify our recoverable silicon material sources by entering into strategic relationships with both semiconductor and solar power companies in and outside China. We will continue to seek to optimize the allocation of our virgin polysilicon supply between spot market purchases and long-term supply contracts so as to procure virgin polysilicon at competitive costs while effectively managing the risks associated with the fluctuations in the prices of virgin polysilicon.

Our Products

We manufacture and sell monocrystalline and multicrystalline wafers, solar cells and solar modules. Silicon wafers are thin sheets of high-purity silicon material that are cut from ingots to produce solar cells. Solar cells convert sunlight into electricity by a process known as the photovoltaic effect. Multiple solar cells are electrically interconnected and packaged into solar modules, which form the building blocks for solar power generating systems.

Our product mix has evolved rapidly since our inception, as we have incorporated more of the solar power value chain through the expansion of our production capabilities and acquisition. We commenced:

 

   

processing and selling recoverable silicon materials in June 2006;

 

   

manufacturing and selling monocrystalline ingots in August 2007;

 

128


Table of Contents
   

manufacturing and selling monocrystalline wafers in March 2008;

 

   

manufacturing and selling multicrystalline ingots in June 2008;

 

   

manufacturing and selling multicrystalline wafers in July 2008;

 

   

manufacturing and selling solar cells in July 2009; and

 

   

manufacturing and selling solar modules in August 2009.

Commencing in 2009, we retained a substantial majority of our output of recovered silicon materials and silicon ingots for our own production of monocrystalline and multicrystalline wafers. As a result, a substantial majority of our revenues were derived from sales of silicon wafers, and to a lesser degree, solar cells and solar modules in 2009. We believe that the change in our product mix has enabled us to capture the efficiencies of our increasingly vertically integrated production process. In addition, we have provided processing services, such as silicon wafer tolling services, at the request of customers from time to time. Pursuant to such processing services arrangement, we produce silicon wafers from ingots provided by our customers at their expenses for a fee. We will continue to provide processing services as appropriate to optimize the utilization of our production capacity.

The following table sets forth details of the sales of our products and services for each of the periods indicated:

 

    For the Year Ended December 31,
  2007   2008   2009
    Volume   Revenue   Volume   Revenue   Volume   Revenue
    (MW,
except
recovered
silicon
materials)
  (RMB in
thousands)
  (MW,
except
recovered
silicon
materials)
  (RMB in
thousands)
  (MW,
except
recovered
silicon
materials)
  (RMB in
thousands)
                         

Products

           

Recovered silicon materials (metric tons)

  349.1   536,755.2   397.9   902,249.0   11.7   28,039.4

Silicon ingots

  12.6   170,007.2   33.1   483,544.9   0.01   98.9

Silicon wafers

      51.4   794,860.1   180.4   1,102,232.8

Solar cells(1)

          27.3   225,866.3

Solar modules(2)

          14.4   182,015.1

Processing services

    2,390.5     2,960.1     29,607.1
                 

Total

    709,152.9     2,183,614.1     1,567,859.6
                 

 

(1)   In addition to solar cells manufactured by ourselves, we also engaged third party factories to produce solar cells from silicon wafers we provided for sale to our customers in the year ended December 31, 2009.

 

(2)   In addition to solar modules manufactured by ourselves, we also engaged third party factories to produce solar modules from silicon wafers we provided for sale to our customers in the year ended December 31, 2009.

Monocrystalline Ingots and Wafers

We commenced production of monocrystalline ingots in August 2007. Our annual manufacturing capacity of monocrystalline ingots as of March 31, 2010 was approximately 230 MW. In 2007, we sold all of our monocrystalline ingot blocks to our customers, while in 2008 we retained a portion for our own production of monocrystalline wafers. Commencing in 2009, we retained substantially all of our output of monocrystalline ingots for our own wafer production as we continue to expand our monocrystalline wafer production capacity.

 

129


Table of Contents

We commenced production of monocrystalline wafers in March 2008. We currently sell monocrystalline wafers with dimensions of 125 mm x 125 mm as well as 156 mm x 156 mm with an average thickness ranging between 180 and 200 microns.

Multicrystalline Ingots and Wafers

We commenced production of multicrystalline ingots in June 2008. Our annual manufacturing capacity of multicrystalline ingots as of March 31, 2010 was approximately 80 MW. In 2008, we sold multicrystalline ingot blocks to our customers, while retaining a portion for our own production of multicrystalline wafers. As our multicrystalline wafer production capacity continues to expand, we retained substantially all of our output of multicrystalline ingots for our own multicrystalline wafer production commencing in 2009.

We commenced production of multicrystalline wafers in July 2008. We currently sell multicrystalline wafers with dimensions of 156 mm x 156 mm with an average thickness of 200 microns.

Solar Cells

We commenced production of solar cells in July 2009 following our acquisition of Zhejiang Jinko. Our annual solar cell production capacity was approximately 200 MW as of March 31, 2010. The efficiency of a solar cell converting sunlight into electricity is represented by the ratio of electrical energy produced by the cell to the energy from sunlight that reaches the cell. The conversion efficiency of solar cells is determined to a large extent by the quality of silicon wafers used to produce the solar cells. Most of our monocrystalline solar cells have dimensions of 125 mm x 125 mm and 156 mm x 156 mm.

Solar Modules

We commenced producing solar modules in August 2009. Our annual solar module production capacity was approximately 200 MW as of March 31, 2010. We produce a series of models of solar modules for which we have received TÜV and CE certifications. We also produce solar modules according to specifications provided by our customers.

Recovered Silicon Materials

Historically, we sold recovered silicon materials that we recover through chemical cleaning and processing, while retaining a substantial portion for our own silicon ingot and silicon wafer production. Commencing in 2009, we retained a substantial majority of our output of recovered silicon materials for our own production of silicon ingots, which we use to produce silicon wafers. We conduct our recoverable silicon material processing operations at our manufacturing facilities in the Shangrao Economic Development Zone. Our proprietary processing technologies allow us to process and recover a broad range of recoverable silicon materials for sale as well as for our own silicon ingot and silicon wafer production. Moreover, our ability to produce both monocrystalline and multicrystalline products also provides us with the flexibility to utilize recovered silicon materials of different grades.

Recovered silicon materials cost less than virgin polysilicon. Our ability to process large volumes of silicon materials through our recoverable silicon material processing operations therefore provides us with a cost advantage over those competitors that do not possess the necessary expertise and large, well-trained and cost-effective work force to sort large volumes of such materials or the relevant process technologies and production scale to effectively treat and clean large volumes of such materials.

 

130


Table of Contents

Manufacturing

Processing of Recoverable Silicon Materials

Leveraging our scale and expertise in the sourcing and treatment of recoverable silicon materials, our large, well-trained and cost-effective work force and our proprietary process technologies, we sold 349.1 metric tons, and 397.9 metric tons of recovered silicon materials for the years ended December 31, 2007 and 2008, respectively. We sold 11.7 metric tons recovered silicon materials for the year ended December 31, 2009 as we retained a substantial majority of our output of recovered silicon materials for own production silicon ingots and silicon wafers. We also provide our customers with recoverable silicon material processing services from time to time. As of December 31, 2009, we employed 128 full-time employees to clean and sort recoverable silicon materials in our processing operations.

The recoverable silicon materials we use in our recoverable silicon material processing operations generally include integrated circuit scraps, partially-processed and broken silicon wafers, broken solar cells, pot scraps, silicon powder, ingot tops and tails and other off-cuts. The processing of recoverable silicon materials involves three main steps: screening, cleaning and sorting. Our suppliers, including Hexing, first test and screen the recoverable silicon materials based on the resistivity and electrical properties of such materials. The screened materials are then delivered to our facilities for cleaning.

Cleaning

We begin the recoverable silicon material cleaning process with chemical baths and ultrasonic cleaning to remove impurities from silicon materials. We recycle water used during the cleaning processes, which lowers the cost of cleaning and reduces waste water discharge. Our proprietary chemical formula and know-how in controlling the temperature, timing and procedure of chemical baths help us improve the quality and yield of the recovered silicon materials.

Sorting

After the silicon materials have been cleaned, they are dried through baking. Dried silicon materials are sorted into various grades based on their resistivity and other electrical properties in our dust-free workshop. We then package the silicon materials for our own use or, previously, for shipment to customers.

Ingot Manufacturing

We produce monocrystalline ingots in electric furnaces. We place silicon materials, consisting of virgin polysilicon feedstock and recovered silicon materials of various grades into a quartz crucible in the furnace, where the silicon materials are melted. While heating the silicon materials, we pump a stream of argon, a chemically inert gas, into the furnace to remove the impurities vaporized during the heating process and to inhibit oxidation, thus enhancing the purity of the silicon ingots. A thin crystal “seed” is dipped into the molten silicon to determine the crystal orientation and structure. The seed is rotated and then slowly extracted from the molten silicon, which adheres to the seed and is pulled vertically upward to form a cylindrical silicon ingot consisting of a single large silicon crystal as the molten silicon and crucible cool.

We have modified some of our monocrystalline furnaces to allow us to apply our furnace reloading production process, which enables us to increase the size of our silicon ingots while lowering our unit production costs by enhancing the utilization rate of our furnaces and reducing unit costs of consumables and utilities. After the silicon ingot is pulled and cooled, we square the silicon ingot in our squaring machines into blocks.

We produce multicrystalline ingots in electric furnaces. We place silicon materials, consisting of virgin polysilicon feedstock and recovered silicon materials of various grades mixed according to our proprietary formula, into a quartz crucible in the furnace, where the silicon materials are melted. While heating the silicon

 

131


Table of Contents

materials, we pump argon into the furnace to remove impurities and inhibit oxidation. The molten silicon is cast into a block and crystallized, forming a multicrystalline structure as the molten silicon and crucible cool. After the multicrystalline silicon block is cast and cooled, we square it in our squaring machine and cut it into individual blocks. We have improved our high-precision wire squarers and squaring techniques, which allows us to reduce the sizes of ingot tops, tails and other off-cuts during the squaring process, thus increasing the sizes of ingot blocks available to be cut into wafers.

We test monocrystalline and multicrystalline ingots as to their minority carrier lifetime, which is an important measurement of impurity levels of crystalline silicon material, as well as resistivity, electric properties and chemical properties and cut off the unusable parts before they are cut into wafers.

Wafer Cutting

We cut ingots into wafers with high-precision wire saws which use steel wires carrying slurry to cut wafers from the ingot blocks. Using proprietary know-how and our process technology, we have improved these wire saws to enable us to cut ingot blocks longer than the size that the wire saws were originally designed to cut as well as to increase the number of quality conforming silicon wafers produced from each ingot block, produce silicon wafers with thickness of a high degree of consistency and improve the quality of silicon wafers. We currently manufacture our monocrystalline wafers in 125 mm x 125 mm dimensions with an average thickness ranging between 180 and 200 microns and our multicrystalline wafers in 156 mm x 156 mm dimensions with an average thickness of 200 microns. The dimensions of the silicon wafers we produce are dictated by current demand for market standard products. However, our production equipment and processes are also capable of producing silicon wafers in other dimensions if market demand should so require.

After silicon wafers are cut from silicon ingots, they are cleaned and inserted into frames. The framed silicon wafers are further cleaned, dried and inspected before packaging.

 

132


Table of Contents

The following diagram illustrates our recovered silicon material processing and silicon ingot and silicon wafer manufacturing process:

LOGO

 

(1)   Commencing in 2009, we retained a substantial majority of our output of recovered silicon materials for our own silicon ingot production.

 

(2)   Commencing in 2009, we retained substantially all of our output of our silicon ingots for our own silicon wafer production.

 

133


Table of Contents

Solar Cell Manufacturing

Our solar cell manufacturing process starts with the ultrasonic cleaning process to remove oil and surface particles from silicon wafers, after which the silicon wafers undergo a chemical cleaning and texturing etching process to remove impurities and create a suede-like structure on the wafer surface, which reduces the reflection of sunlight and increases the absorption of solar energy of solar cells. Through a diffusion process, we then introduce certain impurities into the silicon wafers to form an electrical field within the solar cell. We achieve the electrical isolation between the front and back surfaces of the silicon wafer by edge isolation, or removing a very thin layer of silicon around the edge. We then apply an anti-reflection coating to the front surface of the silicon wafer to enhance its absorption of sunlight through a process called “plasma-enhanced chemical vapor deposition”, or PECVD. We screen-print negative and positive metal contacts, or electrodes, on the front and back surfaces of the solar cell, respectively, with the front contact in a grid pattern to collect the electrical current. Silicon and metal electrodes are then fused through an electrode firing process in a conveyor belt furnace at a high temperature. After the electrode firing process, solar cells are tested, sorted and packaged.

The diagram below illustrates the solar cell manufacturing process:

LOGO

Solar Module Manufacturing

Solar modules are produced by interconnecting multiple solar cells into desired electrical configurations through welding. The interconnected solar cells are laid out and laminated in a vacuum. Through these processes, the solar modules are weather-sealed, and thus are able to withstand high levels of ultraviolet radiation, moisture, wind and sand. Assembled solar modules are packaged in a protective aluminum frame prior to testing.

The following diagram illustrates the solar module manufacturing process:

LOGO

Manufacturing Facilities

We have established our silicon wafer and solar module manufacturing base in the Shangrao Economic Development Zone in Shangrao, Jiangxi Province and solar cell manufacturing base in Haining, Zhejiang Province. As of December 31, 2009, we owned manufacturing facilities with a total gross floor area of 89,061 square meters, including 71,639 square meters in Shangrao and 17,422 square meters in Haining. We also lease

 

134


Table of Contents

manufacturing facilities with a total gross floor area of approximately 15,282 square meters in Shangrao from Jiangxi Desun. Shangrao’s close proximity to Zhejiang Province, Jiangsu Province and Shanghai Municipality, where many of our customers or suppliers are located, provides convenient and timely access to key resources and production inputs, as well as transportation of finished products to customers. In addition, because the economies of Shangrao Municipality and Jiangxi Province are currently not as fully developed as the economies of Zhejiang Province, Jiangsu Province, Hebei Province and Shanghai Municipality, where many of our domestic competitors are located, we believe we are able to enjoy lower labor and electricity costs in our Jiangxi manufacturing base than some of our competitors. We believe that lower labor costs provide us with an advantage in such stages of our production process as the treatment of recoverable silicon materials and manufacturing of solar modules which requires significant labor, allowing us to reduce our unit production costs.

As a fast-growing manufacturing company located in the Shangrao Economic Development Zone, Jiangxi Jinko has received support from the local government in terms of priority supply of electric power and ready access to land within the Economic Development Zone. The Shangrao Economic Development Zone Management Committee and Shangrao County Power Supply Co., Ltd. completed the construction of the first stage of an electric power transformation and distribution substation, which currently has an annual capacity of 438 million kWh at Jiangxi Jinko’s manufacturing site in order to support its operations and assure it of priority supply. Moreover, Jiangxi Jinko has a priority status in terms of supply and availability of land within the Shangrao Economic Development Zone. As of December 31, 2009, Jiangxi Jinko had obtained land use rights for approximately 313,366 square meters of land zoned for industrial use within the Shangrao Economic Development Zone for its facilities. We believe our current land use rights are sufficient for the major capacity expansion plans of Jiangxi Jinko by 2010.

In addition, Zhejiang Jinko also receives support from the local government in Haining, Zhejiang Province. Zhejiang Jinko has been able to obtain land at discounted prices and it receives government awards for investment in production equipment of exceeding RMB3.0 million. In addition, the local government in Haining provides financial incentives to local enterprises such as Zhejiang Jinko for recruiting high-caliber employees from outside Haining as well as financial assistance to such employees, which has helped Zhejiang Jinko attract high-caliber employees necessary for its solar cell operations.

Production Capacity

Since we commenced operations in June 2006, we have rapidly expanded our operations from the processing of recoverable silicon materials to the production of silicon ingots and silicon wafers. Through our acquisition of Zhejiang Jinko, we have added solar cells to our product lines. In addition, we commenced producing solar modules in August 2009. The following table sets forth our production capacity for silicon ingots, silicon wafers, solar cells and modules as of December 31, 2007, 2008 and 2009 and March 31, 2010.

 

     As of December 31    As of
March 31,
     2007    2008    2009    2010
     (in MW)

Ingot manufacturing(1)

           

Monocrystalline ingots

   70    130    195    230

Multicrystalline ingots

      80    80    80

Total ingot manufacturing

   70    210    275    310

Silicon wafer production(2)

      185    300    300

Solar cell production

         150    200

Solar module production

         150    200

 

(1)   We measure our annual ingot manufacturing capacity in MW according to the number of silicon wafers that can be derived from each ingot block and certain assumed conversion efficiency rates for solar cells using our silicon wafers.

 

(2)   We measure our annual silicon wafer production capacity in MW according to certain assumed conversion efficiency rates for solar cells using our silicon wafers.

 

135


Table of Contents

We plan to expand our annual silicon wafer and solar module production capacity to approximately 500 MW each and annual solar cell production capacity to approximately 400 MW by December 31, 2010.

We procure equipment from leading PRC and international vendors. As of December 31, 2009, we had commitments from our equipment suppliers for the delivery of additional furnaces, PECVD systems, screen printers, diffusion furnaces and laminating machines to support our expansion plans in 2010. In line with our production capacity expansion plan, we plan to purchase additional equipment in the future.

We cannot guarantee that we will be able to successfully implement all of our expansion plans. See “Risk Factors — Risks Related to Our Business and Our Industry — Our failure to successfully execute our business expansion plans would have a material adverse effect on the growth of our sales and earnings.”

Quality Control and Certification

We employ strict quality control procedures at each stage of the manufacturing process in accordance with ISO 9001 quality management standards to ensure the consistency of our product quality and compliance with our internal production benchmarks. We have also received international certifications for certain models of our solar modules. The following table sets forth the certifications we have received and major test standards our products and manufacturing processes have met:

 

Date

  

Certification and Test Standard

  

Relevant Product or Process

January 2008

   CE Certification, a verification of electromagnetic compatibility (EMC) compliance issued by SGS Taiwan Ltd. to certify compliance with the principal protection requirement of the directive 2004/108/EC of the European Union and EN61000-6-3:2001+A11:2004 and EN61000-6-1:2001 standards    certain types of solar modules produced by Zhejiang Jinko

August 2009

   TÜV certificate, issued by TÜV Rheinland Product Safety GmbH to certify compliance with IEC 61215:2005 and EN 61215:2005 standards titled “Crystalline silicon terrestrial photovoltaic (PV) modules-design qualification and type approval”    certain types of solar modules produced by Zhejiang Jinko

September 2009

   TÜV certificate, issued by TÜV Rheinland Product Safety GmbH to certify compliance with IEC 61215:2005 and EN 61215:2005 standards titled “Crystalline silicon terrestrial photovoltaic (PV) modules-design qualification and type approval”    certain types of solar modules produced by Jiangxi Jinko

September 2009

   TÜV certificate, issued by TÜV Rheinland Product Safety GmbH to certify compliance with IEC 61730-1:2004, IEC 61730-2:2004, EN 61730-1:2007 and EN 61730-2:2007 standards titled “Photovoltaic (PV) module safety qualification”    certain types of solar modules produced by Zhejiang Jinko

 

136


Table of Contents

Date

  

Certification and Test Standard

  

Relevant Product or Process

September 2008

   Quality Management System Certificate, issued by Xingyuan Certification Centre Co., Ltd. to certify that Zhejiang Jinko’s quality management system conforms to the GB/T 19001-2000 — ISO 9001:2000 standard    design, development, manufacture and service of solar cell and module by Zhejiang Jinko

September 2008

   Environmental Management System Certificate, issued by Xingyuan Certification Centre Co., Ltd. to certify that Zhejiang Jinko’s environmental management system conforms to the GB/T 24001-2004 — ISO 14001:2004 standard   

design, development, manufacture and service of solar cell and module by Zhejiang Jinko

April 2009

   Certificate issued by UL DQS Inc. to certify that Jiangxi Jinko’s quality management system complies with the ISO9001:2000 standard    manufacture of silicon wafers

October 2009

   Certificate of Quality Management System Certification, issued by Beijing New Century Certification Co., Ltd. to certify that Jiangxi Jinko’s quality management system conforms with the GB/T 19001-2008/ISO 9001:2008 standard    manufacture and sale of solar module

April 2010

  

Environmental Management System Certificate, issued by UL DQS Inc. to certify that Jiangxi Jinko’s environmental

management system fulfils the requirement of the ISO14001:2004 standard

   design and manufacture of PV solar module and the manufacture of silicon wafer by Jiangxi Jinko

We have established systematic inspections at various manufacturing stages, from raw material procurement to finished product testing, to identify product defects during the manufacturing process. Raw materials that fail to pass our incoming inspection are returned to suppliers. We have also established guidelines for recoverable silicon material processing, silicon ingot production, silicon wafer cutting and manufacturing of solar cells and solar modules.

We believe that we are able to maintain the quality and reliability of our products through close monitoring of our manufacturing processes by our quality control team and scheduled maintenance of our equipment. To ensure the effectiveness of our quality control procedures, we also provide periodic training to our production line employees. As of December 31, 2009, our quality control team consisted of 241 employees, including 148 employees of Jiangxi Jinko and 93 employees of Zhejiang Jinko. Our quality control team in Jiangxi Jinko also work with our sales and marketing team to provide customer support services. Our quality control team employ advanced equipment in testing quality of our products, including minority carrier lifetime, resistivity, conversion efficiency and other characteristics requested in the industry standard. In addition, as part of our customer support services, we also regularly follow up with our customers regarding our product quality and incorporate their suggestions for process improvements.

Our quality control team also consists of experienced equipment maintenance technicians that oversee the operation of our manufacturing lines to avoid unintended interruptions and minimize the amount of time required for scheduled equipment maintenance.

 

137


Table of Contents

Research and Development

We believe that the continual improvement of our research and development capability is vital to maintaining our long-term competitiveness. As of December 31, 2009, Jiangxi Jinko employed 30 experienced engineers at our research and development laboratory located at its new expansion facilities in the Shangrao Economic Development Zone, focusing on enhancing our product quality, improving production efficiency and increasing the conversion efficiency of solar power products including silicon wafers, solar cells and solar modules. We have developed a furnace reloading production process that enables us to increase the size of our ingots while lowering our unit production costs by increasing the production output of our furnaces and reducing unit costs of consumables, such as crucibles and argon, and utilities. Through our processing technology, we have improved our wire saws to enhance the quality of silicon wafers and cut silicon ingots into silicon wafers with thicknesses of a higher degree of consistency. In addition, our high-precision wire sawing techniques enable us to reduce the sizes of ingot tops and tails as well as other off-cuts during the cutting process, thereby allowing us to increase the number of silicon wafers produced from each silicon ingot block. Zhejiang Jinko also employed 13 experienced engineers as of December 31, 2009 for research and development focusing on optimizing the solar cell production lines, selection of equipment and improving the quality of our solar cells. Our research and development team at Zhejiang Jinko has significantly improved the efficiency of our solar cell production lines and improved the quality of our products since our acquisition of Zhejiang Jinko.

In addition to our full time research and development team, we also involve employees from our manufacturing department to work on our research and development projects on a part-time basis. We plan to enhance our research and development capability by recruiting additional experienced engineers specialized in the solar power industry. Certain members of our senior management spearhead our research and development efforts and set strategic directions for the advancement of our products and manufacturing processes.

We have entered into a cooperative agreement with Nanchang University in Jiangxi Province, China and established a joint photovoltaic materials research center on the campus of Nanchang University. Under the terms of the agreement, the research center is staffed with faculty members and students in doctoral and master programs from the material science and engineering department of Nanchang University as well as our technical personnel. The research center focuses on the improvement of our manufacturing process, solution of technical problems in our silicon wafer and solar module production process and the research and development of new materials and technologies. The research center also provides on-site technical support to us and training for our employees. Under the agreement, any intellectual property developed by the research center will belong to us. The research center has assisted us in improving the quality of our silicon wafers, including the conversion efficiency of our silicon wafers, as well as our silicon wafer production process.

We intend to continue to devote management and financial resources to research and development as well as to seek cooperative relationships with other academic institutions to further lower our overall production costs, increase the conversion efficiency rate of our solar power products and improve our product quality. In particular, we intend to use the proceeds of this offering to invest in research and development to improve product quality, reduce manufacturing costs, improve conversion efficiency and overall performance of our products and improve the productivity of our silicon ingot, silicon wafer, solar cell and solar module manufacturing process.

Customers, Sales and Marketing

Our silicon wafer customers include major solar cell manufacturers who sell their products in the domestic and international markets, including Ningbo Solar, our largest customer by revenue for the year ended December 31, 2009. Our sales to these customers were made primarily as spot market sales or under short-term contracts. As of the date of this prospectus, we had long-term sales contracts outstanding with four customers for the sale of an aggregate of approximately 266 MW of silicon wafers from 2010 to 2013. Our long-term silicon wafer sales contracts represent our long-term supplier relationships with our silicon wafer customers. Because we

 

138


Table of Contents

may allow our customers flexibility in relation to the volume, timing and pricing of their orders under the long-term sales contracts on a case-by-case basis, the volumes of silicon wafers actually purchased by such customers in any given period and the timing and amount of revenue we recognize in such period may not correspond to the terms of the contracts. See “Risk Factors — Risks Related to Our Business and Our Industry — Notwithstanding our continuing efforts to further diversify our customer base, we derive, and expect to continue to derive, a significant portion of our revenues from a limited number of customers. As a result, the loss of, or a significant reduction in orders from, any of these customers would significantly reduce our revenues and harm our results of operations.” We sell a significant majority of our silicon wafers in the PRC market. We also began exporting a small portion of our silicon wafers in May 2008 to Hong Kong, and have since then increased our efforts to enter overseas markets. We have sold our products to customers in overseas markets such as Hong Kong, Taiwan, the Netherlands, Germany, the United States, India, Belgium, Singapore, Korea, France, Spain and Israel. As we build out our solar cell and solar module production capacity and achieve full-scale production of those products, we intend to use our entire output of silicon wafers, other than those that are subject to existing sales contracts with third parties, for the production of our own solar cells and modules by the end of 2010. However, we will continue to evaluate whether to sell silicon wafers to customers from time to time based on our silicon wafer production and market opportunities.

Through our acquisition of Zhejiang Jinko, we have added solar cells to our product lines. Zhejiang Jinko’s customers historically have consisted primarily of domestic manufacturers of solar modules based in the Yangtze River Delta. As we increase our output of solar cells and solar modules, we plan to use our solar cells for our own production of solar modules and sell the balance to customers both in and outside China. Our solar cell customers include solar module manufacturers in China such as Shanghai Chaori Solar Energy Science & Technology Co., Ltd. and Suzhou Dingli Photovoltaic Technology Co., Ltd.

Our solar module customers consist of project developers, system integrators, distributors and sales agents. To achieve rapid expansion of our sales channels and broad market penetration, we sell our solar modules through overseas subsidiaries and sales agents, to distributors as well as directly to project developers and system integrators. We plan to establish a distribution network comprising sales and marketing subsidiaries, distributors and agents across the world, covering major solar product markets such as Germany, Spain, Italy, Japan, Korea, the United States and the Czech Republic. In April 2010, we established a subsidiary in Germany to conduct sales, marketing and brand development for our products in the European market. We intend to establish similar subsidiaries in the other major markets to expand our customer base and market penetration. We also plan to participate in trade shows and exhibitions worldwide and advertising on major industry publications to promote our products.

For the year ended December 31, 2007, we derived all of our revenues from customers in China, and sales to our top five customers, which consisted of sales of recovered silicon materials and monocrystalline ingots, collectively accounted for 80.4% of our total revenues. For the year ended December 31, 2008, we derived 93.5% of our revenues from customers in China, and sales to our top five customers, which consisted of sales of recovered silicon materials, monocrystalline silicon wafers, monocrystalline ingots, multicrystalline wafers and multicrystalline ingots, collectively accounted for approximately 62.0% of our total revenues. For the year ended December 31, 2009, we derived 57.2% of our revenues from customers in China, and sales to our top five customers, which consisted of sales of silicon wafers and solar modules, collectively accounted for approximately 23.7% of our total revenues. The balance of our sales for the year were export sales, principally to customers in Taiwan, Germany, Holland and the United States. In particular, our sales of recovered silicon materials and monocrystalline ingots to a subsidiary of ReneSola, which is a related party, accounted for 53.8%, 28.9% and 1.8% of our total sales for the years ended December 31, 2007 and 2008, respectively. No customers individually accounted for more than 10% of our sales for the year ended December 31, 2009. Commencing in 2009, we retained a substantial majority of our output of recovered silicon materials and silicon ingots for our own production of monocrystalline and multicrystalline wafers. Consequently, for the year ended December 31, 2009, we derived a substantial majority of our revenues from the sale of silicon wafers, with significant revenues

 

139


Table of Contents

generated from sales of solar cells and solar modules. We also derived a relatively small amount of revenues from processing service fees.

As of the date of this prospectus, we have the following long-term silicon wafer sales contracts outstanding:

 

   

a five-year sales contract with Alex New Energy, pursuant to which we have committed to sell approximately 129 MW of monocrystalline and multicrystalline silicon wafers from 2009 to 2013. The price under this contract from December 2008 to February 2009 was fixed. For the remaining term of the contract, prices will be negotiated at a more preferential rate than the spot market price. Pursuant to this contract, we delivered 6.6 MW of silicon wafers to Alex New Energy in 2009.

 

   

a three-year sales contract with Green Power, under which we have committed to sell approximately 125 MW of monocrystalline wafers from 2009 to 2011. The sales price under this contract for 2009 was fixed, subject to renegotiation if the spot market price fluctuates beyond a pre-determined range of the contract price. The prices for 2010 and 2011 will be determined following future negotiations. On August 27, 2009, Green Power and we amended this contract, pursuant to which the volume of monocrystalline silicon wafers we have committed to sell to Green Power was reduced to approximately 64 MW. Pursuant to this contract, we delivered 4.0 MW of silicon wafers to Green Power in 2009.

 

   

a five-year sales contract with Jetion, under which we have committed to sell approximately 103 MW of monocrystalline wafers from 2009 to 2013, respectively. The price under this contract is fixed, subject to renegotiation if the spot market price fluctuates beyond a pre-determined range of the contract price. Pursuant to this contract, we delivered 4.4 MW of silicon wafers to Jetion in 2009.

 

   

a 17-month sales contract with Win-Korea, pursuant to which we have committed to sell approximately 15 MW of multicrystalline wafers in 2009 and 2010. The price under this contract from January 2009 to June 2009 was fixed, with the price for the remaining term of this contract subject to negotiation at six months intervals. In April 2009, we and Win-Korea amended this sales contract, pursuant to which we will provide monocrystalline wafers instead of multicrystalline wafers to Win-Korea. Pursuant to this contract, we delivered 0.4 MW of silicon wafers to Win-Korean in 2009.

The price renegotiation benchmarks that we have agreed with our silicon wafer customers, which relate to the degree of spot market price fluctuation that will give rise to renegotiation, are generally a 5% or 10% rise or fall in the spot market price. As a result, we believe that the current prices for our silicon wafers under these contracts reflect market prices.

Due to volatile market conditions resulting from the recent global economic downturn, we renegotiated our long-term silicon wafer sales contracts with our customers. For example, in the first half of 2009, some of our silicon wafer customers asked us to postpone shipment dates specified in their long-term contracts with us. Moreover, at customers’ requests, a number of our long-term silicon wafer sales contracts were renegotiated to reduce selling prices or change fixed prices to variable prices to reflect market price trends. In addition, some of our silicon wafer customers have changed the type of products purchased in order to adjust to their customers’ needs. See “Risk Factor — Risks Related to Our Business and Our Industry — As polysilicon supply increases, the corresponding increase in the global supply of the downstream solar power products including our products may cause substantial downward pressure on the prices of our products and reduce our revenues and earnings.” and “Risk Factor — Risks Related to Our Business and Our Industry — We may be adversely affected by volatile market and industry trends, in particular, the demand for our solar power products may decline, which may reduce our revenues and earnings.” Because we may allow our customers flexibility in relation to the volume, timing and pricing of their orders under the long-term sales contracts on a case-by-case basis, the volumes actually purchased by such customers under these contracts in any given period and the timing and amount of revenues we recognize in such period may not correspond to the terms of these contracts. See “Risk Factors — Risks Related to Our Business and Our Industry — Notwithstanding our continuing efforts to further diversify our customer base, we derive, and expect to continue to derive, a significant portion of our revenues from a limited number of customers. As a result, the loss of, or a significant reduction in orders from, any of

 

140


Table of Contents

these customers would significantly reduce our revenues and harm our results of operations.” We plan to enter into additional half-year to one-year sales contracts with fixed sales volumes and flexible price terms to cover a portion of our silicon wafer production. We also expect to retain some flexibility to respond to market changes and price fluctuations by selling a portion of our silicon wafers in the spot market. Our spot market sales generally provide for agreed volume at the prevailing spot price. We generally require our silicon wafer customers to make full payment within a specified period after delivery and the length of such period is negotiated on a case by case basis.

Historically, we sold a portion of our recovered silicon materials to a subsidiary of ReneSola and third-party customers and utilized the remaining recovered silicon materials for our own ingot and silicon wafer production. Commencing in 2009, in connection with our capacity expansion plans, we retained a substantial majority of our output of recovered silicon materials for our own integrated production.

We sell our solar cells under short-term contracts and by spot market sales. The payment terms of our solar cell sales contracts are negotiated and determined on a case-by-case basis, but we require some of our customers to make full payment before delivery. We also allow certain customers with good credit worthiness to make the full payment within 30 days after delivery.

To achieve rapid expansion of our sales channels and broad market penetration, we sell our solar modules through overseas subsidiaries and sales agents, to distributors as well as directly to project developers and system integrators. We allow certain customers with good credit worthiness to make full payment within 30 to 45 days of delivery. As we increase our sales of solar modules, in particular, in the overseas markets, we expect our sales on credit terms will increase. We have entered into the following major contracts for the sales of our solar modules:

 

   

We have entered into a three-year 175 MW strategic cooperation agreement, subsequently amended by a memorandum of understanding, with Upsolar Co., Ltd., or Upsolar, who will act as a non-exclusive distributor of our solar modules in the United States and Canada. The agreement is renewable for another two years. The solar modules will bear the Upsolar brand and indicate that they are made by JinkoSolar. Sales targets of 25 MW, 50 MW and 100 MW are established under the agreement for the years 2010, 2011 and 2012 respectively, and Upsolar is required to fulfill not less than 70% of the sales target for each year. Our selling price to Upsolar will be set at a reasonable discount from the prevailing market price agreeable to both parties at the time of each purchase order, and Upsolar will earn the difference between the purchase price from us and their selling price. For the portion of the sales that exceeds the sales target, we will give Upsolar a further small discount. We are entitled to terminate this strategic cooperation agreement if Upsolar fails to achieve 70% of the sales target for three consecutive months.

 

   

We have entered into a sales agreement with SOLART Systems/Solsmart BV for the sale of 10 MW of solar modules at market price in 2010.

 

   

We have entered into a co-certification and cooperation contract with Visel Placas SL, or Visel, pursuant to which Visel is able to purchase on an exclusive basis from us certain types of solar modules for which we have agreed to obtain co-certifications with Visel’s name and resell such co-certificated solar modules on a non-exclusive basis worldwide except in the United States and Canada. We are prohibited from selling solar modules under such co-certification to any third party. We have agreed to sell 10 MW of solar modules to Visel in 2010 under this contract. In addition, we are required to reserve 20 MW of our solar module production capacity per year for this contract and Visel is required to purchase from us not less than 9 MW of such co-certificated solar modules each year. Our selling price for 2010 under this contract is fixed based on the market price for comparable products prevailing at the contract date, subject to downward adjustment to the extent Visel exceeds the purchase target of 20 MW in 2010. If Visel fails to purchase 9 MW of solar modules under this contract in 2010, we will be compensated for a fixed amount. The products sold by us under this contract are required to bear Visel’s name.

 

141


Table of Contents
   

We have entered into a sales contract with Die Solar, pursuant to which we have agreed to sell 30 MW of solar modules in 2010 at a fixed price per watt based on the market price for comparable products prevailing at the contract date.

 

   

We have entered into a sales contract with Changzhou Cuibo Solar Energy Company, or Cuibo, pursuant to which we have agreed to sell 50 MW of solar modules to Cuibo in 2010 at a fixed price per watt based on the market price for comparable products prevailing at the contract date.

 

   

We have entered into a sales and OEM contract with ILB Helios, pursuant to which we have agreed to sell 52 MW of solar modules bearing ILB Helios’ brand to ILB Helios in 2010 at fixed prices per watt based on the market prices for comparable products prevailing at the contract date, subject to renegotiation if the fluctuations of the prevailing market price for solar modules, which for purposes of this contract, will be calculated based on the prices of a number of solar module providers based in China, exceed 5%.

 

   

We have entered into a sales contract with Erquan Technologies und Handels GmbH, or Erquan, pursuant to which we have agreed to sell Erquan 10 MW of solar modules in 2010 at a fixed price per watt based on the market price for comparable products prevailing at the contract date.

 

   

We have entered into a sales contract with TRE Tozzi Renewable Energy, or Tozzi, pursuant to which we have agreed to sell Tozzi 35 MW of solar modules in 2010 at a fixed price per watt based on the market price for comparable products prevailing at the contract date. In addition the customer has the option to purchase an additional 14 MW of solar modules at a fixed price if it exercises this option no later than May 31, 2010. This contract is conditional upon the eligibility of our products for bank financing.

 

   

We have entered into an OEM processing agreement with One Sun (Holdings) Co., Ltd., or One Sun, and Senergy Corporation (Shanghai) Co., Ltd., or Senergy, pursuant to which we have agreed to sell to One Sun and Senergy a minimum of 10 MW of solar modules in 2010. The prices for delivery in the first quarter of 2010 are fixed based on the market prices for comparable products prevailing at the contract date, subject to renegotiation based on fluctuations in the prevailing market price for solar modules or the exchange rate between Euro and RMB. The prices for the remaining term are subject to negotiation quarterly and One Sun and Senergy have the option to purchase an additional 15 MW of solar modules in 2010 under this agreement. In addition, we have also agreed to sell an aggregate of 120 MW to 150 MW of solar modules to One Sun and Senergy under this agreement for 2011 and 2012. If One Sun and Senergy fail to purchase 10 MW of solar modules from us under this agreement in 2010, we have the right to unilaterally terminate this agreement. The products we have agreed to sell under this agreement will bear the brand, trademark, logo, symbol, label or any other marks designated by One Sun and Senergy.

 

   

We have entered into a sales contract with Mage Solar GmbH, or Mage, pursuant to which we have agreed to sell 20 MW of solar modules bearing Mage’s brands from May 2010 to December 2010. The prices for delivery in May 2010 are fixed based on the market prices for comparable products prevailing at the contract date and the prices for the remaining deliveries are subject to negotiation.

 

   

We have entered into a sales contract with E environment-energy GmbH, or E environment-energy, pursuant to which we have agreed to sell approximately 10 MW of solar modules to E environment-energy in 2010 at fixed prices based on the market prices for comparable products prevailing at the contract date.

 

   

We have entered into a purchase agreement with Arcman Solar Power Corp., or Arcman, pursuant to which we have agreed to sell 41 MW of solar modules to Arcman in 2010 at fixed prices based on the market prices for comparable products prevailing at the contract date. Arcman has the discretion to increase or reduce its purchase volume by 5% under this agreement.

In addition, we have been appointed by IBC Solar AG., or IBC, as a manufacturer for the production of IBC-brand modules.

 

142


Table of Contents

Suppliers

Raw Materials

The raw materials used in our manufacturing process consist primarily of silicon materials, including virgin polysilicon and recoverable silicon materials, metallic pastes, EVA, tempered glass, aluminum frames and related consumables. Historically, through the six months ended June 30, 2008, an industry-wide shortage of virgin polysilicon which is the basic raw material for all crystalline silicon solar power products and semiconductor devices, coupled with rapidly growing demand from the solar power industry, caused rapid escalation of virgin polysilicon prices and an industry-wide silicon shortage. However, during the fourth quarter of 2008 and the first half of 2009, virgin polysilicon prices fell substantially as a result of significant new manufacturing capacity coming on line and falling demand for solar power products resulting from the global recession and credit market contraction. Because recoverable silicon materials which we process into recovered silicon materials for production of silicon ingots can be used as a substitute for virgin polysilicon, prices of recoverable silicon materials, which are generally priced at a discount to virgin polysilicon, were also negatively affected in the fourth quarter of 2008 and the first half of 2009. Our greater reliance on virgin polysilicon in the future may increase our costs compared to what such costs would have been had we maintained our historical proportions of recovered silicon materials to virgin polysilicon. For the years ended December 31, 2007, 2008 and 2009, virgin polysilicon accounted for approximately 1.4%, 13.0% and 48.6%, respectively, and recoverable silicon materials accounted for approximately 98.6%, 87.0% and 51.4%, respectively, of our total silicon raw material purchases by value. However, as the demand for solar power products has significantly recovered in response to a series of factors, including the recovery of the global economy and increasing availability of financing for solar power projects, the price of virgin polysilicon has generally stabilized beginning in the third quarter compared to the second quarter.

With a view to maintaining a balanced portfolio of sales and supply contracts and mitigating our exposure to potential price volatility of silicon materials, we currently rely on a combination of in-house processed recovered silicon material and virgin polysilicon from long-term supply contracts and spot market purchases with our suppliers to meet our silicon raw material requirements. Our spot market purchases generally provide for agreed volumes at the prevailing spot prices.

Virgin Polysilicon

We purchase solar grade virgin polysilicon from both domestic and foreign suppliers. In order to secure reliable supplies of polysilicon to meet our capacity expansion plans and better manage the cost of raw material procurement, we currently rely on a combination of long-term supply contracts and spot market purchases.

We have entered into long-term supply contracts with the following virgin polysilicon suppliers:

 

   

We have entered into a five-year supply contract with Zhongcai Technological, pursuant to which Zhongcai Technological has committed to supply us with virgin polysilicon for five years starting from 2009, with prices to be negotiated each month.

 

   

We have entered into a nine-year supply contract with Hoku, pursuant to which Hoku has committed to supply us with virgin polysilicon for nine years starting from December 2010, at prices specified for each year, which prices decline each year.

Under these two long-term supply contracts, we have agreed to procure an aggregate of 5,350 metric tons of virgin polysilicon from 2009 to 2019. We also source virgin polysilicon through spot market purchases from various suppliers, such as Jiangsu Zhongneng Polysilicon Technology Development Co., Ltd. In January 2009, in response to the rapidly changing market conditions, we amended our long-term supply contract with Zhongcai Technological to provide for prices to be negotiated at monthly intervals in consideration of market prices, as well as to allow us to delay our prepayment until further negotiation. In addition, in February and November 2009, we amended our long-term supply contract with Hoku to reduce the volumes purchased under such

 

143


Table of Contents

contract and the total prepayment amount from US$55 million to US$20 million. However, Hoku may not be able to perform its obligations under the long-term supply contract with us if it ceases to continue as a going concern. If that were the case, we would seek to fill our virgin polysilicon requirements through a combination of spot market and short-term contract purchases. See “Risk Factors — Risks Related to Our Business and Our Industry — Hoku may not be able to complete its plant construction in a timely manner or may cease to continue as a going concern, which may have a material adverse effect on our results of operations and financial condition” and “Risk Factors — Risks Related to Our Business and Our Industry — Volatility in the prices of silicon raw materials makes our procurement planning challenging and could have a material adverse effect on our results of operations and financial condition.”

Recoverable Silicon Materials

We recover silicon in-house from recoverable silicon materials, including integrated circuit scraps, partially-processed and broken silicon wafers, broken solar cells, pot scraps, silicon powder, ingot tops and tails and other off-cuts. We purchase recoverable silicon materials primarily from Hexing, and have also historically purchased such materials from Tiansheng, Yangfan and a number of trading companies. In the years ended December 31, 2007, 2008 and 2009, recoverable silicon materials sourced from Hexing, Tiansheng and Yangfan represented 95.1%, 58.8% and 11.6% of our total purchase amount of silicon raw materials. In addition, we also procure recoverable silicon materials from third-party trading companies.

Since the commencement of our silicon ingot production in 2007, we have met a significant portion of our total silicon material requirements with the recovered silicon materials supplied by our recoverable silicon material processing operations. Although we expect to source an increasing amount of virgin polysilicon, we expect to continue to meet a significant portion of our silicon material requirements from recovered silicon materials for 2010.

In addition, we sourced recoverable silicon materials through spot market purchases from a number of trading companies, including Dong Yang Recoverable Material Recycle Co., Ltd.

Other Raw Materials

We use metallic pastes as raw materials in our solar cell production process. Metallic pastes are used to form the grids of metal contacts that are printed on the front and back surfaces of the solar cells through screen-printing to create negative and positive electrodes. We procure metallic pastes from third parties under monthly contracts. In addition, we use EVA, tempered glass, aluminum frames and other raw materials in our solar module production process. We procure these materials from third parties on a monthly basis.

Consumables, Components and Utilities

Crucible

A crucible is a ceramic container used to hold polysilicon feedstock for melting in the furnace and therefore must be able to withstand extremely high temperatures. Crucibles are currently not reusable, as once the silicon ingot is formed, the crucible holding the silicon ingot will be broken and removed from the silicon ingot. We source crucibles for monocrystalline silicon ingot and multicrystalline silicon ingot production from various manufacturers, including Jiangxi Suowei Technology Co., Ltd.

Slurry and Wire

Slurry is used in the wire sawing process. It is a fluid composed of silicon carbide, which functions as an abrasive, and polyethylene glycol, or PEG, which acts as a coolant. Wires are used in wire saws to carry the slurry in order to create an abrasive cutting tool. We procure slurry from domestic suppliers, including Wuxi

 

144


Table of Contents

Jiayu Electrical Materials Technologies Co., Ltd. We purchase wire saws and wire squares, manufactured by Nippei Toyama Corporation, from Miyamoto.

Electricity

We consume a significant amount of electricity in our operations, especially in the silicon ingot production process and any disruption or shortages in our electricity supply may disrupt our normal operations and cause us to incur additional costs. As a fast-growing manufacturing company located in the Shangrao Economic Development Zone, we have received support from the local government in terms of priority supply of electric power. In addition, because the economy of Shangrao Municipality and Jiangxi Province are currently not as fully-developed as the economies of Zhejiang Province, Jiangsu Province, Hebei Province and Shanghai Municipality, where many of our domestic competitors with respect to silicon wafers are located, we believe we are able to enjoy lower electricity costs.

In addition, to support our operations and assure us of priority electricity supply, the Shangrao Economic Development Zone Management Committee and Shangrao County Power Supply Co., Ltd. have completed the construction of the first stage of an electric power transformation and distribution substation at our manufacturing site which currently has an annual capacity of 438 million kWh. The proximity of this substation to our facilities will provide us with more stable power supplies.

Water

We require a significant amount of silicon water for our manufacturing operations. We also use high-purity silicon water for our recoverable silicon materials processing, silicon ingot production and silicon wafer cleaning. We purify silicon water supplied from local sources using equipment we purchased from domestic suppliers. We have not experienced any material interruption or shortages in our water supplies.

Gases

We use argon in our ingot production process to remove the impurities vaporized during the heating process and to inhibit oxidation. Argon is a chemically inert gas. We purchase argon primarily from two domestic suppliers under one-year-term contracts. We use gases such as nitrogen and silane in our solar cell production process. We purchase these gases under monthly contracts.

Chemicals

We use acids and alkali in the cleaning process to recover silicon materials and other chemicals to clean silicon ingots and silicon wafers. We also use chemicals in the cleaning process for producing solar cells. We purchase acids and alkali for cleaning recoverable silicon materials primarily from two domestic suppliers under one-year-term contracts at market prices. We purchase other chemicals on the spot market.

Solar Cells

We procure solar cells from third parties on the spot market to produce solar modules when our solar cell production cannot fully meet the demand of our solar module production.

Equipment

We purchase our key manufacturing equipment from major PRC and overseas equipment manufacturers.

For silicon ingot and silicon wafer manufacturing, as of December 31, 2009, we had 116 monocrystalline furnaces purchased from domestic vendors including Ningxia Jing Yang Automotion Co. and Huasheng

 

145


Table of Contents

Tianlong, 12 multicrystalline furnaces purchased from GT Solar, 52 wire saws purchased from Nippei Toyama Corporation and eight wire squarers purchased from Nippei Toyama Corporation, Huasheng Tianlong and Beijing Jin Lian Fa Numerical Control Science & Technology Co., Ltd. In addition, as of December 31, 2009, we leased 16 monocrystalline furnaces from Universal Xiao Shan under a capital leasing agreement. We equip each furnace with a safety kit to limit potential damage to the equipment in the event of a power outage as well as to minimize the risk of personal injuries or accidents. In addition, we had six automatic production lines for producing solar cells and two automatic production lines and four manual production lines for producing solar modules as of December 31, 2009.

In connection with our expansion plan, we had equipment supply contracts outstanding as of December 31, 2009 for additional equipment. The additional equipment will be used to accommodate our planned increase in annual solar cell and solar module production capacity in 2010. We expect to purchase a significant amount of additional equipment in connection with our solar cell and solar module production capacity expansion plan. We intend to use a portion of the proceeds of this offering to purchase the additional equipment. We will seek to optimize our capital structure to finance our capital expenditures in the most efficient manner and to prudently maximize shareholder return. In that connection, we will manage our use of equity and debt financing from various sources, including the net proceeds from this offering as well as loans from commercial banks, to fund capital expenditures. We expect that the anticipated net proceeds from this offering, either alone or in conjunction with bank loans, will be sufficient to procure all additional equipment necessary to implement our expansion plan. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Capital Expenditures.”

Intellectual Property

We possess proprietary process technologies and know-how that allow us to process and recover a broad range of recoverable silicon materials, including those that fall outside the customary range in relation to certain electrical characteristics. In addition, based on our proprietary know-how and technologies acquired through our own research and development efforts, we have made improvements to equipment that we purchased from leading equipment vendors, including improvements to facilitate the use of our furnace reloading technology and silicon wafer-cutting technology. Our furnace reloading technology enables us to increase the size of our ingots while lowering our unit production costs by enhancing the utilization rate of our furnaces and reducing the unit costs of consumables. Our silicon wafer-cutting process technology, which involves the improvement of our wire saws based on process engineering know-how, improves the quality of our silicon wafers, increases the number of quality conforming silicon wafers and allows us to cut ingots into silicon wafers with thicknesses of a high degree of consistency. In addition, our high-precision wire squaring techniques enable us to reduce the sizes of ingot tops, tails and other off-cuts during the squaring process, thereby allowing us to increase the size of each ingot block and the number of silicon wafers produced from each ingot.

As of the date of this prospectus, we had ten pending patent applications as well as 15 pending trademark applications in China, including “Jinko”, “JinkoSolar” and “SUN VALLEY”, respectively. We had two pending trademark applications in the other countries or regions. As of the date of this prospectus, we have been granted four patents.

We also rely on a combination of trade secrets and employee and third-party confidentiality agreements to safeguard our intellectual property. Our research and development employees are required to enter into agreements that require them to assign to us all inventions, designs and technologies that they develop during the terms of their employment with us. We have not been a party to any intellectual property claims since our inception.

We have also entered into two patent licensing agreements with Zhejiang Sci-Tech University and Yiqun Jiang, respectively, pursuant to which Zhejiang Sci-Tech University has granted us the license to use its patented

 

146


Table of Contents

technology in producing solar cells for a term of five years and two months and Yiqun Jiang has granted us the license to use his patented technology for recovering silicon materials for a term of six years.

Competition

We operate in a highly competitive and rapidly evolving market. As we build out our solar cell and solar module production capacity and increase the output of these products, we mainly compete with integrated as well as specialized manufacturers of solar cells and solar modules such as BP Solar, Sharp Corporation, SunPower Corporation, Suntech, Trina and Yingli Green Energy in a continuously evolving market. In the solar wafer market, we also compete with major international vendors, such as MEMC, Deutsche Solar, M. SETEK and PV Crystalox, as well as companies located in China such as ReneSola, LDK, Shunda, Hairun, Comtec. Recently, some upstream polysilicon manufacturers as well as downstream manufacturers have also built out or expanded their silicon ingot, wafer, solar cell and solar module production operations. We expect to face increased competition as other silicon ingot, wafer, solar cell and solar module manufacturers continue to expand their operations. Many of our current and potential competitors may have a longer operating history, greater financial and other resources, stronger brand recognition, better access to raw materials, stronger relationships with customers and greater economies of scale than we do. Moreover, certain of our competitors are highly-integrated producers whose business models provide them with competitive advantages as these companies are less dependent on upstream suppliers and/or downstream customers in the value chain.

We compete primarily in terms of product quality and consistency, pricing, timely delivery, ability to fill large orders and reputation for reliable customer support services. We believe that our high quality products, our low manufacturing costs and easy access to key resources from our strategically located production bases in China, our recoverable silicon material processing operations and our proprietary process technologies enhance our overall competitiveness.

In addition, some companies are currently developing or manufacturing solar power products based on thin film materials, which require significantly less polysilicon to produce than monocrystalline and multicrystalline solar power products. These new alternative products may cost less than those based on monocrystalline or multicrystalline technologies while achieving the same or similar levels of conversion efficiency in the future. Furthermore, the solar industry generally competes with other renewable energy and conventional energy resources.

Production Safety and Environmental Matters

Safety

We are subject to extensive PRC laws and regulations in relation to labor and safety. We have adopted stringent safety procedures at our facilities to limit potential damage and personal injury in the event of an accident or natural disaster, and have devised a number of internal guidelines as well as instructions for our manufacturing processes, including the operation of equipment and handling of chemicals. We distribute safety-related manuals to employees and post bulletins setting forth safety instructions, guidelines and policies throughout our facilities. Failure by employees to follow these guidelines and instructions result in monetary fines. All of our new employees undergo extensive safety training and education. We require our technical staff to attend weekly training programs taught by instructors to enhance their work safety awareness and ensure safe equipment operation. We conduct regular inspections and our experienced equipment maintenance team oversees the operation of our manufacturing lines to maintain proper and safe working conditions. Since our inception, we have not experienced any major work-related injuries and our operations have been in compliance with the applicable labor and safety laws and regulations in all material respects.

 

147


Table of Contents

Environment

We generate and discharge chemical wastes, waste water, gaseous waste and other industrial waste at various stages of our manufacturing process as well as during the processing of recovered silicon material. We have installed pollution abatement equipment at our facilities to process, reduce, treat, and where feasible, recycle the waste materials before disposal, and we treat the waste water, gaseous and liquid waste and other industrial waste produced during the manufacturing process before discharge. We also maintain environmental teams at each of our manufacturing facilities to monitor waste treatment and ensure that our waste emissions comply with PRC environmental standards. Our environmental teams are on duty 24 hours. We are required to comply with all PRC national and local environmental protection laws and regulations and our operations are subject to periodic inspection by national and local environmental protection authorities. PRC national and local environmental laws and regulations impose fees for the discharge of waste materials above prescribed levels, require the payment of fines for serious violations and provide that the relevant authorities may at their own discretion close or suspend the operation of any facility that fails to comply with orders requiring it to cease or remedy operations causing environmental damage. As of December 31, 2009, no such penalties had been imposed on us.

Employees

As of December 2007, 2008 and 2009, we had a total of 953, 996 and 2,640 employees, respectively. The following table sets forth the number of our employees categorized by our areas of operations and as a percentage of our workforce as of dates indicated:

 

     As of December 31,
     2007    2008    2009

Manufacturing and engineering

   852    798    2,005

General and administration

   39    87    190

Quality control

   48    61    241

Research and development

      17    43

Purchasing and logistics

   8    15    95

Marketing and sales

   6    18    66
              

Total

   953    996    2,640
              

 

Note:   Figures exclude employees of the VIEs.

In line with the expansion of our operations, we plan to hire additional employees, including additional accounting, finance and sales, marketing personnel as well as manufacturing and engineering employees. The number of our manufacturing and engineering employees decreased in 2008 compared to 2007, because we ceased recoverable silicon material screening business in January 2008.

We are required under PRC law to make contributions to employee benefit plans equivalent to a fixed percentage of the salaries, bonuses and certain allowances of our employees. The total amount we accrued for employee benefits for the years ended December 31, 2008 and 2009 was RMB6.9 million and RMB11.5 million (US$1.7 million), respectively.

We typically enter into a standard confidentiality and non-competition agreement with our management and research and development personnel. Each of these contracts includes a covenant that prohibits the relevant personnel from engaging in any activities that compete with our business during his or her employment with us and for two years after their employment with us.

We believe we maintain a good working relationship with our employees, and we have not experienced any labor disputes or any difficulty in recruiting staff for our operations. Our employees are not covered by any collective bargaining agreement.

 

148


Table of Contents

Insurance

We have insurance policies covering certain machinery such as our monocrystalline and multicrystalline furnaces. These insurance policies cover damages and losses due to fire, flood, design defects or improper installation of equipment, water stoppages or power outages and other events stipulated in the relevant insurance policies. Insurance coverage for Jiangxi Jinko’s fixed assets other than land amounted to approximately RMB147.1 million (US$21.6 million) as of December 31, 2009. Insurance coverage for Zhejiang Jinko’s fixed assets and inventory amounted to approximately RMB187.4 million (US$27.5 million) as of December 31, 2009. As of December 31, 2009, we had insurance coverage for Jiangxi Jinko’s and Zhejiang Jinko’s product liability of up to RMB1.0 billion (US$146.5 million), export credit insurance coverage for Jiangxi Jinko of up to US$150.0 million and liability insurance coverage for errors and omissions of the information and network technology for Jiangxi Jinko and Zhejiang Jinko of up to US$2.0 million. We believe that our overall insurance coverage is consistent with the market practice in China. We believe that our overall insurance coverage is consistent with the market practice in China. However, significant damage to any of our manufacturing facilities and buildings, whether as a result of fire or other causes, could have a material adverse effect on our results of operations. In accordance with customary practice in China, we do not carry any business interruption insurance. Moreover, we may incur losses beyond the limits, or outside the coverage, of our insurance policies. See “Risk Factors — Risks Related to Our Business and Our Industry — We have limited insurance coverage and may incur losses resulting from product liability claims, business interruption or natural disasters.” We paid an aggregate of approximately RMB230.6 thousand, RMB841.4 thousand and RMB1.9 million (US$285.0 thousand) in insurance premiums in 2007, 2008 and 2009, respectively.

Property

Our silicon wafer production facilities are located in the Shangrao Economic Development Zone in Shangrao, Jiangxi Province and our solar cell production facilities are located in Haining, Zhejiang, China. As of December 31, 2009, we had secured land use rights for 313,366 square meters of land zoned for industrial use in the Shangrao Economic Development Zone, 9,980 square meters of which was used for an electric power transformation and distribution substation established by the Shangrao Economic Development Zone Management Committee. As of December 31, 2009, we had also secured land use rights for 60,205 square meters of land zoned for industrial use in Haining.

As of December 31, 2009, we owned manufacturing facilities with a total gross floor area of 89,061 square meters, including 71,639 square meters in Shangrao and 17,422 square meters in Haining. In addition, we leased factory plants with a total gross floor area of 15,282 square meters in Shangrao from Jiangxi Desun under a factory leasing agreement that Jiangxi Jinko and Jiangxi Desun entered into in January 2008, pursuant to which Jiangxi Jinko committed to pay Jiangxi Desun approximately RMB1.1 million (US$161.2 thousand) each year for ten years. Jiangxi Jinko uses the leased facilities for its monocrystalline ingot manufacturing operations. In November 2007, we leased manufacturing facilities with a total gross floor area of approximately 3,006 square meters to Xinwei. Xinwei used the leased facilities for its manufacturing operations.

As of December 31, 2009, we had employee dormitories with an aggregate gross floor area of 10,058 square meters, including 6,092 square meters in Shangrao and 3,966 square meters in Haining. We currently lease office spaces and employee dormitories with a gross floor area of 2,691 square meters and 1,909 square meters, respectively, in Shangrao from Jiangxi Desun. We also lease approximately 1,250 square meters of office space for our representative offices in Shanghai.

In addition, we also obtained land use rights for residential use in Shangrao Economic Development Zone with an aggregate site area of approximately 235,840 square meters, which is currently vacant. In connection with our capacity expansion plans for our silicon ingot, wafer, cell and module production, we intend to construct additional employee dormitories on these two parcels of land. However, we do not have any concrete plan for construction on these parcels of land and we may be subject to significant vacant land fees or forfeit our land use

 

149


Table of Contents

rights with respect to these two parcels of land. See “Risk Factors — Risks Related to Our Business and Our Industry — We may be subject to significant vacant land fees or even forfeit our land use rights with respect to two pieces of land zoned for residential use.” Industrial and residential land use rights expire 50 years and 70 years, respectively, from the delivery date of the land use rights.

As of December 31, 2009, Jiangxi Jinko pledged land zoned for industrial use with a total site area of 235,390 square meters, land zoned for residential use with a total site area of 235,840 square meters, buildings with an aggregate gross floor area of approximately 46,509 square meters and certain equipment as security for its bank borrowings. As of December 31, 2009, Zhejiang Jinko pledged land zoned for industrial use with a total site area of 60,205 square meters and buildings with an aggregate gross floor area of approximately 17,063 square meters as security for its bank borrowings.

We believe that our existing facilities are adequate and suitable to meet our present needs. We believe that the amount of land for which we currently have land use rights is sufficient for our 2010 capacity expansion plan. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Principal Factors Affecting Our Results of Operations — Production Capacity Expansion.”

Legal and Administrative Proceedings

On July 1, 2009, Jiangxi Jinko filed an action in Shangrao People’s Court, Jiangxi Province against Beijing Jingyuntong Technology Co., Ltd. or Jingyuntong, for the defects in the monocrystalline furnaces it purchased from Jingyuntong. Jiangxi Jinko has sought a refund of the purchase price and compensation for the losses incurred by Jiangxi Jinko with a total amount of approximately RMB1.9 million (US$0.3 million). As of December 31, 2009, this suit was still pending.

On July 20, 2009, Jingyuntong filed an action in Daxing People’s Court, Beijing against Jiangxi Jinko for the overdue payments amounting to approximately RMB1.3 million (US$0.2 million) and the liquidated damages arising from such overdue payment. As of December 31, 2009, this suit was still pending.

On August 8, 2009, Zhejiang Jinko filed an action in Haining People’s Court against Haining Baixin Household Appliances Co., Ltd., or Baixin, for the defects in the air conditioners it purchased from Baixin and the improper designs and installation of these air conditioners. Zhejiang Jinko has sought a return of those air conditioner, the refund of the purchase price with a total amount of approximately RMB1.95 million (US$2.9 million) and damages of RMB8.0 million (US$1.2 million). As of December 31, 2009, the suit was still pending.

Other than as disclosed above, we are currently not a party to any other material legal or administrative proceedings, and we are not aware of any other material legal or administrative proceedings threatened against us. We may from time to time become a party to various legal or administrative proceedings arising in the ordinary course of our business.

 

150


Table of Contents

MANAGEMENT

Directors and Executive Officers

The following table sets forth information regarding our directors and executive officers:

 

Name

   Age   

Position

Xiande Li

   34    Chairman of the board of directors

Kangping Chen

   37    Director and chief executive officer

Xianhua Li

   36    Director and vice president

Wing Keong Siew

   59    Independent director

Haitao Jin

   56    Independent director

Zibin Li

   70    Independent director

Steven Markscheid

   56    Independent director

Longgen Zhang

   46    Chief financial officer

Arturo Herrero

   38    Chief strategy officer

Guoxiao Yao

   47    Chief technology officer

Musen Yu

   61    Vice president

Zhiqun Xu

   43   

Vice president

Mr. Xiande Li is a founder of our company, the chairman of our board of directors and the chairman of the board of directors of Jiangxi Jinko. Prior to founding our company, he served as the marketing manager at Zhejiang Yuhuan Solar Energy Source Co., Ltd. from 2003 to 2004, where his responsibilities included overseeing and optimizing day-to-day operations. From 2005 to 2006, he was the chief operations supervisor of ReneSola Ltd., a related company listed on the AIM market of the London Stock Exchange in 2006, then dual listed on the NYSE in 2008, where he was in charge of marketing and operation management. Mr. Li is a brother of Mr. Xianhua Li and the brother-in-law of Mr. Kangping Chen.

Mr. Kangping Chen is a founder, director and the chief executive officer of our company as well as the general manager of Jiangxi Jinko. Prior to founding our company, he was the chief financial officer of Zhejiang Supor Cookware Company Ltd., a company listed on the PRC A share market, from October 2003 to February 2008, where his major responsibilities included establishing and implementing its overall strategy and annual business plans. Mr. Chen is the brother-in-law of Mr. Xiande Li.

Mr. Xianhua Li is a founder, director and vice president of our company as well as deputy general manager of Jiangxi Jinko. Prior to founding our company, Mr. Li served as the chief engineer of Yuhuan Automobile Company, where his major responsibilities included conducting and managing technology research and development activities and supervising production activities, from 1995 to 2000. From 2000 to 2006, he was the factory director of Zhejiang Yuhuan Solar Energy Source Co., Ltd., where he was responsible for managing its research and development activities. Mr. Li is a brother of Mr. Xiande Li.

Mr. Wing Keong Siew has been a director of our company since May 2008. Mr. Siew was appointed by Flagship Desun Shares Co., Limited, one of the holders of our series A redeemable convertible preferred shares. He founded Hupomone Capital Partners in 2003. Mr. Siew was president of H&Q Asia Pacific China and Hong Kong from 1998 to 2003 and a general manager of Fairchild Systems for Asia, managing director of Mentor Graphics Asia Pacific and managing director of Compaq Computer Corporation from January 1988 to September 1988. In 1995, he formed a joint venture with UBS AG to raise a China Private Equity Fund. He worked as senior vice president of H&Q Singapore from 1989 to 1995. Mr. Siew received his bachelor’s degree in electrical and electronics engineering from Singapore University in 1975 and his presidential/key executive MBA from Pepperdine University in 1999.

Mr. Haitao Jin has been a director of our company since September 2008. Mr. Jin was appointed by holders of our series B redeemable convertible preferred shares. He has also been the deputy chairman of Shenzhen

 

151


Table of Contents

Chamber of Investment and Commerce since 2004. Prior to joining SCGC, Mr. Jin was deputy general manager of Shenzhen SEG Group Co., Ltd. and general manager of SEG Co., Ltd., a listed company on the Shenzhen Stock Exchange from 2001 to 2003. Between 1993 and 2000, Mr. Jin was a general vice president and duty general manager of Shenzhen Electronics Group Co., Ltd. Mr. Jin received his master’s degree in management psychology in 1987. In 1996, he received his master’s degree in engineering science from Huazhong University of Science and Technology. In 2002, he became an honorary professor at the Wuhan University of Science and Technology.

Mr. Zibin Li has been an independent director of our company since July 10, 2009. He has also been chairman of China Association of Small and Medium Enterprises and a consultant of the municipal government of Chongqing City and Dalian City since 2006. Mr. Li was previously a vice director of National Development and Reform Commission and vice director of the Office of Steering Committee of West Region Development of the State Counsel from 2000 to 2005, and a member of the Tenth National Committee of the Chinese People’s Political Consultative Conference from 2003 to 2005. Mr. Li was deputy mayor of Jinxi, Liaoning Province from 1989 to 1991, deputy minister of the Ministry of Chemical Industry from 1991 to 1994, deputy mayor of Shenzhen from 1994 to 1995 and mayor of Shenzhen from 1995 to 2000. Mr. Li received a bachelor’s degree in chemical engineering from Tsinghua University in 1964.

Mr. Steven Markscheid has been an independent director of our company since September 15, 2009. He has also been chief executive officer of Synergenz BioScience Inc. since 2007, and board member of Emerald Hill Capital Partners since 2006, CNinsure, Inc. since 2007 and Pacific Alliance China Growth Fund since 2008. Mr. Markscheid was previously representative of US China Business Council from 1978 to 1983, vice president of Chase Manhattan Bank from 1984 to 1988, vice president of First Chicago Bank from 1988 to 1993, case leader of Boston Consulting Group from 1994 to 1997, director of business development of GE Capital (Asia Pacific) from 1998 to 2001, director of business development of GE Capital from 2001 to 2002, senior vice president of GE Healthcare Financial Services from 2003 to 2006, chief executive officer of HuaMei Capital Company, Inc. from 2006 to 2007. He received his bachelor’s degree in East Asian studies from Princeton University in 1976, his master’s degree in international affairs and economics from Johns Hopkins University in 1980 and an MBA degree from Columbia University in 1991.

Mr. Longgen Zhang has been our chief financial officer since September 2008. Prior to joining us, Mr. Zhang served as a director and the chief financial officer of Xinyuan Real Estate Co., Ltd., a company listed on the NYSE, from August 2006 to October 2008. Mr. Zhang served as the chief financial officer at Crystal Window and Door Systems, Ltd. in New York from 2002 to 2006. He has a master’s degree in professional accounting, and a master’s degree in business administration from West Texas A&M University and a bachelor’s degree in economic management from Nanjing University in China. Mr. Zhang is a U.S. certified public accountant.

Mr. Arturo Herrero is chief strategy officer of our company. Prior to joining us in March 2010, Mr. Herrero served as vice president of sales and marketing of Trina Solar Limited, a company listed on the NYSE, from August 2007 to January 2010 and director of Trina Solar Limited from September 2006 to July 2007. From 2002 to 2006, Mr. Herrero was the global procurement manager for BP Solar, first as a global procurement manager for solar power systems and then as a global procurement manager for strategic raw materials. From 2000 to 2002, he was a marketing and sales manager at BP Oil. Before that, he was the logistics director advisor of Amcor Flexible, a company that is engaged in flexible packaging, from 1998 through 2000, and he was a planning manager at Nabisco from 1996 to 1998. Mr. Herrero received his degree in economics and business administration from the University of Pompeu Fabra in Spain in 1996, his degree in electrical engineering from Polytechnics University of Catalonia in Spain in 1996 and his master’s degree in marketing in 2001 from Instituto Superior de Marketing in Spain.

Mr. Guoxiao Yao is the chief technology officer of our company. Prior to joining us in January 2010, Mr. Yao was the chief technology officer of a subsidiary of GCL-Poly Energy Holdings Limited, a company

 

152


Table of Contents

listed on the Hong Kong Stock Exchange from May 2009 to January 2010. From September 2006 to January 2009, Mr. Yao was the chief technology officer of Yingli Green Energy Holding Co., Ltd., a company listed on the NYSE. Mr. Yao received his bachelor’s degree in mechanical engineering from Zhejiang University of Technology in China, his master’s degree in solar thermal engineering from the European Solar Engineering School at Dalarna University in Sweden and his doctorate degree in PV engineering from the University of New South Wales in Australia.

Mr. Musen Yu is vice president of our company. Prior to joining us in 2007, he was head of the Coal and Gold Production Bureau of the Shangrao Municipality from 2002 to 2007 and the deputy head of the Coal and Gold Production Bureau of the Shangrao Municipality from 1992 to 2002. Mr. Yu was the party committee secretary and secretary of the Party Disciplinary Committee of the Mining Affairs Bureau of Le Municipality from 1986 to 1992 and the deputy secretary of the Party Committee of the Mining Affairs Bureau of Yinggang Ling from 1984 to 1986. Mr. Yu received his bachelor’s degree in mining engineering from the China University of Mining and Technology in 1984.

Mr. Zhiqun Xu is vice president of production department of our company. Prior to joining us, Mr. Xu served as a vice executive manager of Hareon Solar Technology Co., Ltd. from November 2007 to November 2008. From January 2005 to October 2007, Mr. Xu was a sales and marketing manager of Saint-Gobain Quartz (Jinzhou) Co., Ltd. Mr. Xu was a manager of silicon production and technology department from April 2002 to December 2004. In addition, he was a project manager and deputy production manager of Shanghai General Silicon Material Co., Ltd. from February 2000 to March 2002. Mr. Xu was a manager of production and technology department of MCL Electronics Material Co., Ltd. from April 1996 to January 2000. In 1990, he joined Luoyang Monocrystalline Silicon Factory as a monocrystalline growth processing engineer. Mr. Xu received a bachelor’s degree in science from Jilin University in 1990.

The business address of our directors and executive officers is c/o JinkoSolar Holding Co., Ltd., 1 Jingke Road, Shangrao Economic Development Zone, Jiangxi Province, 334100, People’s Republic of China.

Terms of Directors and Executive Officers

Under our third amended and restated memorandum and articles of association which will become effective upon the completion of this offering, one-third of our directors for the time being (or, if the number of our directors is not a multiple of three, the number nearest to but not greater than one-third) will retire from office by rotation at each annual general meeting. However, the chairman of our board of directors will not be subject to retirement by rotation or be taken into account in determining the number of our directors to retire in each year. A director will be removed from office automatically if, among other things, the director (i) becomes bankrupt or makes any arrangement or composition with his creditors, or (ii) dies or is found by our company to be or becomes of unsound mind. Our officers are appointed by and serve at the discretion of the board of directors.

Board of Directors

Our board of directors currently consists of seven directors. The law of our home country, which is the Cayman Islands, does not require a majority of the board of directors of our company to be composed of independent directors, nor does the Cayman Islands law require a compensation committee or a nominating committee. We intend to follow our home country practice with regard to composition of the board of directors. We and our existing shareholders have agreed to take all steps necessary to maintain three directors appointed by Xiande Li, Kangping Chen and Xianhua Li, one director appointed by Flagship and one director appointed by the holders of our series B redeemable convertible preferred shares on our board of directors until the expiry of the lock-up period provided in the underwriting agreement. A director is not required to hold any shares in the company by way of qualification. A director may vote with respect to any contract, proposed contract or arrangement in which he is materially interested, provided that such director discloses the nature of his or her interest in such contract or arrangement. A director may exercise all of the powers of our company to borrow

 

153


Table of Contents

money, mortgage our undertakings, property and uncalled capital, and issue debentures or other securities whenever money is borrowed or pledged as security for any obligation of our company or of any third party.

Committees of the Board of Directors

We will have an audit committee, a compensation committee and a nominating committee under the board of directors upon the completion of this offering. We have adopted a new charter for each of the three committees which will become effective upon the completion of this offering. Each committee’s members and functions are described below.

Audit Committee

Our audit committee will consist of Steven Markscheid, Zibin Li and Wing Keong Siew, and will be chaired by Steven Markscheid. All of the members of the audit committee will satisfy the “independence” requirements of the NYSE Listed Company Manual, Section 303A, and meet the criteria for “independence” under Rule 10A-3 under the Exchange Act. The audit committee oversees our accounting and financial reporting processes and the audits of the financial statements of our company. The audit committee is responsible for, among other things:

 

   

selecting the independent auditors and pre-approving all auditing and non-auditing services permitted to be performed by the independent auditors;

 

   

reviewing with the independent auditors any audit problems or difficulties and management’s response;

 

   

reviewing and approving all proposed related-party transactions, as defined in Item 404 of Regulation S-K under the Securities Act;

 

   

discussing the annual audited financial statements with management and the independent auditors;

 

   

reviewing major issues as to the adequacy of our internal controls and any special audit steps adopted in light of material control deficiencies;

 

   

meeting separately and periodically with management and the independent auditors; and

 

   

reporting regularly to the full board of directors.

Compensation Committee

Our compensation committee will consist of Haitao Jin, Kangping Chen and Steven Markscheid, and will be chaired by Haitao Jin. Haitao Jin and Steven Markscheid will satisfy the “independence” requirements of the NYSE Listed Company Manual, Section 303A, and meet the criteria for “independence” under Rule 10A-3 under the Exchange Act. Our home country practice differs from the NYSE rules that require the compensation committees of listed companies to be comprised solely of independent directors. There are, however, no specific requirements under Cayman Islands law on the composition of compensation committees. The compensation committee assists the board in reviewing and approving the compensation structure, including all forms of compensation, relating to our directors and executive officers. The compensation committee is responsible for, among other things:

 

   

reviewing and approving the total compensation package for our three most senior executives;

 

   

reviewing and recommending to the board the compensation of our directors;

 

   

reviewing and approving corporate goals and objectives relevant to the compensation of our chief executive officer, evaluating the performance of our chief executive officer in light of those goals and objectives, and determining the compensation level of our chief executive officer based on this evaluation;

 

154


Table of Contents
   

reviewing periodically and making recommendations to the board regarding any long-term incentive compensation or equity plans, programs or similar arrangements, annual bonuses, employee pension and welfare benefit plans; and

 

   

reporting regularly to the full board of directors.

Nominating Committee

Our nominating and corporate governance committee will consist of Zibin Li, Xiande Li and Steven Markscheid, and will be chaired by Zibin Li. Zibin Li and Steven Markscheid will satisfy the “independence” requirements of the NYSE Listed Company Manual, Section 303A, and meet the criteria for “independence” under Rule 10A-3 under the Exchange Act. Our home country practice differs from the NYSE rules that require the nominating committees of listed companies to be comprised solely of independent directors. There are, however, no specific requirements under Cayman Islands law on the composition of nominating committees. The nominating and corporate governance committee assists the board of directors in selecting individuals qualified to become our directors and in determining the composition of the board and its committees. The nominating and corporate governance committee is responsible for, among other things:

 

   

identifying and recommending to the board nominees for election by the stockholders or appointment by the board, or for appointment to fill any vacancy;

 

   

reviewing annually with the board the current composition of the board with regard to characteristics such as knowledge, skills, experience, expertise and diversity required for the board as a whole;

 

   

identifying and recommending to the board the directors to serve as members of the board’s committees;

 

   

developing and recommending to the board of directors a set of corporate governance guidelines and principles applicable to the company;

 

   

monitoring compliance with our code of business conduct and ethics, including reviewing the adequacy and effectiveness of our procedures to ensure proper compliance; and

 

   

reporting regularly to the full board of directors.

Duties of Directors

Under Cayman Islands law, our directors have a common law duty of loyalty to act in good faith in their dealings with or on behalf of the company and exercise their powers and fulfill the duties of their office honestly. Our directors also have a duty to exercise the skill they actually possess and such care and diligence that a reasonably prudent person would exercise in comparable circumstances. In fulfilling their duty of care to us, our directors must ensure compliance with our memorandum and articles of association. A shareholder has the right to seek damages if a duty owed by our directors is breached. You should refer to “Description of Share Capital — Differences in Corporate Law” for additional information on our standard of corporate governance under Cayman Islands law.

Compensation of Directors and Executive Officers

All directors receive reimbursements from us for expenses necessarily and reasonably incurred by them for providing services to us or in the performance of their duties. Our directors who are also our employees receive compensation in the form of salaries in their capacity as our employees.

For the year ended December 31, 2009, we paid cash compensation in the aggregate amount of RMB7.0 million to our executive officers and directors. The total amount we set aside for the pension or retirement or other benefits of our executive officers and directors was approximately RMB142,000 for the year ended December 31, 2009. For options granted to officers and directors, see “— Share Incentive Plan.”

 

155


Table of Contents

Share Incentive Plan

We adopted our 2009 Long Term Incentive Plan on July 10, 2009, which provides for the grant of incentive plan options, restricted shares, restricted share units, share appreciation rights and other share-based awards, referred to as the “Awards.” The purpose of the 2009 Long Term Incentive Plan is to attract, retain and motivate key directors, officers and employees responsible for the success and growth of our company by providing them with appropriate incentives and rewards and enabling them to participate in the growth of our company.

Plan Administration.  Our 2009 Long Term Incentive Plan is administered by a committee appointed by our board of directors or in the absence of a committee, our board of directors. In each case, our board of directors or the committee will determine the provisions and terms and conditions of each award grant, including, but not limited to, the exercise price, time at which each of the Awards will be granted, number of shares subject to each Award, vesting schedule, form of payment of exercise price and other applicable terms. The plan administrator may also grant Awards in substitution for options or other equity interests held by individuals who become employees of our company as a result of our acquisition or merger with the individual’s employer. If necessary to conform the Awards to the interests for which they are substitutes, the plan administrator may grant substitute Awards under terms and conditions that vary from those that the 2009 Long Term Incentive Plan otherwise requires. Notwithstanding anything in the foregoing to the contrary, any Award to any participant who is a U.S. taxpayer will be adjusted appropriately to comply with Code Section 409A or 424, if applicable.

Award Agreement.  Awards granted under our 2009 Long Term Incentive Plan are evidenced by an Award Agreement that sets forth the terms, conditions and limitations for each award grant, which includes, among other things, the vesting schedule, exercise price, type of option and expiration date of each award grant.

Eligibility.  We may grant awards to an employee, director or consultant of our company, or any business, corporation, partnership, limited liability company or other entity in which our company holds a substantial ownership interest, directly or indirectly, but which is not a subsidiary and which in each case our board of directors designates as a related entity for purposes of the 2009 Long Term Incentive Plan.

Option Term.  The term of each option granted under the 2009 Long Term Incentive Plan may not exceed ten years from the date of grant. If an incentive stock option is granted to an eligible participant who owns more than 10% of the voting power of all classes of our share capital, the term of such option shall not exceed five years from the date of grant.

Exercise Price.  In the case of non-qualified stock option, the per share exercise price of shares purchasable under an option shall be determined by our board of directors and specified in the Award Agreement. In the case of incentive stock option, the per share exercise price of shares purchasable under an option shall not be less than 100% of the fair market value per share at the time of grant. However, if we grant an incentive stock option to an employee, who at the time of that grant owns shares representing more than 10% of the total combined voting power of all classes of our share capital, the exercise price is at least 110% of the fair market value of our ordinary shares on the date of that grant.

Amendment and Termination.  Our board of directors may amend, suspend or terminate the 2009 Long Term Incentive Plan at any time and for any reason, provided that no amendment, suspension, or termination shall be made that would alter or impair any rights and obligations of a participant under any award theretofore granted without such participant’s consent. Unless terminated earlier, our 2009 Long Term Incentive Plan shall continue in effect for a term of ten years from the effective date of the 2009 Long Term Incentive Plan.

 

156


Table of Contents

We have granted options to purchase 4,536,480 ordinary shares to certain of our directors, officers and employees. As of the date of this prospectus, options to purchase 4,536,480 ordinary shares are outstanding. The following table sets forth our option grants since the adoption of our 2009 Long Term Incentive Plan:

 

Name

   Number of
Shares
  

Exercise
Price

  

Grant Date

  

Expiration Date

          (US$
per share)
         

Zibin Li

   *   

2.08

  

August 28, 2009

  

August 28, 2016

Steven Markscheid

   *   

2.08

  

September 15, 2009

  

September 15, 2016

Zhiqun Xu

   *   

2.08

   August 28, 2009    August 28, 2016

Musen Yu

   *   

2.08

   August 28, 2009    August 28, 2016

Longgen Zhang

   953,200   

2.08

  

August 28, 2009

  

October 1, 2013

Arturo Herrero

   635,480    2.08    April 12, 2010    April 12, 2017

Guoxiao Yao

   650,000    2.08    April 12, 2010    April 12, 2017

Other employees

   1,865,700   

2.08

  

August 28, 2009 to April 26, 2010

  

August 28, 2016 to April 26, 2017

 

*   Less than 1% of our outstanding share capital

Employment Agreements

We entered into employment agreements with each of our senior executive officers in March 2008, except for our chief financial officer. In September 2008, Paker entered into an employment agreement with our chief financial officer. In December 2008, JinkoSolar entered into an employment agreement with our chief financial officer and terminated the employment agreement between him and Paker. These employment agreements became effective on the signing date and will remain effective for three years after this offering unless they are terminated for cause by either party. We may terminate a senior executive officer’s employment for cause, at any time, without prior notice or remuneration, for certain acts of the officer, including, but not limited to, failure to satisfy our job requirements during the probation period, a material violation of our regulations, failure to perform agreed duties, embezzlement that causes material damage to us, or conviction of a crime. A senior executive officer may terminate his or her employment for cause at any time, including, but not limited to, our failure to pay remuneration and benefits or to provide a safe working environment pursuant to the employment agreement, or our engagement in deceptive or coercive conduct that causes him or her to sign the agreement. If a senior executive officer breaches any terms of the agreement, which leads to results, including, but not limited to, termination of the agreement, resignation without notice, or failure to complete resignation procedures within the stipulated period, he or she shall be responsible for our economic losses and shall compensate us for such losses.

 

157


Table of Contents

PRINCIPAL SHAREHOLDERS

The following table sets forth information with respect to the beneficial ownership of our ordinary shares, as of the date of this prospectus and assuming the conversion of all outstanding series A redeemable convertible preferred shares and Series B redeemable convertible preferred shares into ordinary shares on an 1:1 basis and approximately 1:1.0054 basis, respectively, and as adjusted to reflect the sale of the ADSs offered in this offering, by:

 

   

each of our directors and executive officers; and

 

   

each person known to us to own beneficially more than 5.0% of our ordinary shares.

 

     Ordinary Shares
Beneficially Owned
Prior to this Offering(1)(2)
   Shares Beneficially
Owned after this
Offering(1)(2)(3)
     Number    %    Number    %

Directors and Executive Officers

           

Xiande Li(4)

   22,742,750    35.77    22,742,750    26.16

Kangping Chen(5)

   13,645,700    21.46    13,645,700    15.70

Xianhua Li(6)

   9,097,100    14.31    9,097,100    10.47

Wing Keong Siew

           

Haitao Jin

           

Zibin Li

           

Steven Markscheid

           

Longgen Zhang(7)

           

Arturo Herrero(8)

           

Guoxiao Yao(9)

           

All Directors and Executive Officers as a group

   45,485,550    71.53    45,485,550    52.33

Principal Shareholders:

           

Brilliant Win Holding Limited(4)

   22,742,750    35.77    22,742,750    26.16

Yale Pride Limited(5)

   13,645,700    21.46    13,645,700    15.70

Peaky Investments Limited(6)

   9,097,100    14.31    9,097,100    10.47

Flagship Desun Shares Co., Limited(10)

   4,064,700    6.39    4,064,700    4.68

SCGC Capital Holding Company Limited(11)

   5,839,600    9.18    5,839,600    6.72

 

(1)   Beneficial ownership is determined in accordance with Rule 13d-3 of the General Rules and Regulations under the Securities Exchange Act of 1934, as amended, and includes voting and investment power with respect to the securities. Except as indicated, and subject to applicable community property laws, the persons named in the table have sole voting and investment power with respect to all ordinary shares shown as beneficially owned by them.

 

(2)   Percentage of beneficial ownership of each listed person prior to the offering is based on 63,587,850 ordinary shares outstanding as of the date of this prospectus, including ordinary shares issuable upon the conversion of our outstanding series A redeemable convertible preferred shares, series B redeemable convertible preferred shares as well as the ordinary shares underlying share options and other awards exercisable by such person within 60 days of the date of this prospectus. Percentage of beneficial ownership of each listed person after the offering is based on 86,927,850 ordinary shares outstanding immediately after the completion of this offering, including the ordinary shares underlying share options and other awards exercisable by such person within 60 days of the date of this prospectus.

 

(3)   Assumes no exercise of the underwriters’ option to purchase additional ADSs.

 

(4)  

Represents 22,742,750 ordinary shares held by Brilliant Win Holding Limited, a British Virgin Islands company which, immediately before the completion of this offering, will be wholly owned by HSBC International Trustee Limited in its capacity as trustee of an irrevocable trust constituted under the laws of the Cayman Islands, with Xiande Li as the settlor and Yixuan Li, daughter of Xiande Li and Cypress Hope Limited, a British Virgin Islands company wholly owned by Xiande Li, as the beneficiaries. The trust will

 

158


Table of Contents
 

be established for the purposes of Xiande Li’s wealth management and family succession planning. HSBC International Trustee Limited as trustee of the irrevocable trust will indirectly hold the shares of Brilliant Win Holding Limited which in turn holds our ordinary shares. HSBC International Trustee Limited is a professional trustee company wholly owned by HSBC Holdings plc, a public company and is ultimately controlled by the board of directors of HSBC Holdings plc which is answerable to the shareholders of HSBC Holdings plc. Xiande Li is the sole director of Brilliant Win Holding Limited and as such has the power to vote and dispose of the ordinary shares held by Brilliant Win Holding Limited, subject to the powers of HSBC International Trustee Limited as trustee. Therefore, Xiande Li is the beneficial owner of all our ordinary shares held by Brilliant Win Holding Limited. The beneficiaries are also beneficial owners of our ordinary shares held by Brilliant Win Holding Limited. The registered address of Brilliant Win Holding Limited is Quastisky Building, PO Box 4389, Road Town, Tortola, British Virgin Islands. Mr. Li is a brother of Mr. Xianhua Li and the brother-in-law of Mr. Kangping Chen.

 

(5)   Represents 13,645,700 ordinary shares held by Yale Pride Limited, a British Virgin Islands company which, immediately before the completion of this offering, will be wholly owned by HSBC International Trustee Limited in its capacity as trustee of an irrevocable trust constituted under the laws of the Cayman Islands, with Kangping Chen as the settlor and Min Liang, Dong Chen, Xuanle Chen and Xiaoxuan Chen, all of whom are family members of Kangping Chen, and Charming Grade Limited, a British Virgin Islands company wholly owned by Kangping Chen, as the beneficiaries. The trust will be established for the purposes of Kangping Chen’s wealth management and family succession planning. HSBC International Trustee Limited as trustee of the irrevocable trust will indirectly hold the shares of Yale Pride Limited which in turn holds our ordinary shares. HSBC International Trustee Limited is a professional trustee company wholly owned by HSBC Holdings plc, a public company and is ultimately controlled by the board of directors of HSBC Holdings plc which is answerable to the shareholders of HSBC Holdings plc. Kangping Chen is the sole director of Yale Pride Limited and as such has the power to vote and dispose of the ordinary shares held by Yale Pride Limited, subject to the powers of HSBC International Trustee Limited as trustee. Therefore, Kangping Chen is the beneficial owner of all our ordinary shares held by Yale Pride Limited. The beneficiaries are also beneficial owners of our ordinary shares held by Yale Pride Limited. The registered address of Yale Pride Limited is Quastisky Building, PO Box 4389, Road Town, Tortola, British Virgin Islands. Mr. Chen is the brother-in-law of Mr. Xiande Li.

 

(6)   Represents 9,097,100 ordinary shares held by Peaky Investments Limited, a British Virgin Islands company which, immediately before the completion of this offering, will be wholly owned by HSBC International Trustee Limited in its capacity as trustee of an irrevocable trust constituted under the laws of the Cayman Islands, with Xianhua Li as the settlor and Jianfen Sheng, Sheng Li and Muxin Li, all of whom are family members of Xianhua Li, and Talent Galaxy Limited, a British Virgin Islands company wholly owned by Xianhua Li, as the beneficiaries. The trust will be established for the purposes of Xianhua Li’s wealth management and family succession planning. HSBC International Trustee Limited as trustee of the irrevocable trust will indirectly hold the shares of Peaky Investments Limited which in turn holds our ordinary shares. HSBC International Trustee Limited is a professional trustee company wholly owned by HSBC Holdings plc, a public company and is ultimately controlled by the board of directors of HSBC Holdings plc which is answerable to the shareholders of HSBC Holdings plc. Xianhua Li is the sole director of Peaky Investments Limited and as such has the power to vote and dispose of the ordinary shares held by Peaky Investments Limited, subject to the powers of HSBC International Trustee Limited as trustee. Therefore, Xianhua Li is the beneficial owner of all our ordinary shares held by Peaky Investments Limited. The beneficiaries are also beneficial owners of our ordinary shares held by Peaky Investments Limited. The registered address of Peaky Investments Limited is Quastisky Building, PO Box 4389, Road Town, Tortola, British Virgin Islands. Mr. Li is a brother of Mr. Xiande Li.

 

(7)   Pursuant to the share option agreement between Longgen Zhang and us under the 2009 Long Term Incentive Plan, Longgen Zhang has been granted the option to acquire 953,200 ordinary shares, representing 1.5% of our issued and outstanding shares on a fully-diluted basis immediately before this offering, which is exercisable 180 days following the effective date of the registration statement which includes this prospectus. Longgen Zhang is not a shareholder of our company.

 

159


Table of Contents
(8)   Pursuant to the share option agreement between Arturo Herrero and us under the 2009 Long Term Incentive Plan, Arturo Herrero has been granted the option to acquire 635,480 ordinary shares, representing 1.0% of our issued and outstanding shares on a fully-diluted basis immediately before this offering, which is exercisable 180 days following the effective date of this registration statement which includes this prospectus. Arturo Herrero is not a shareholder of our company.

 

(9)   Pursuant to the share option agreement between Guoxiao Yao and us under the 2009 Long Term Incentive Plan, Guoxiao Yao has been granted the option to acquire 650,000 ordinary shares, representing approximately 1.02% of our issued and outstanding shares on a fully-diluted basis immediately before this offering, which is exercisable 180 days following the effective date of this registration statement which includes this prospectus. Guoxiao Yao is not a shareholder of our company.

 

(10)   Includes 3,363,150 ordinary shares issuable upon conversion of series A redeemable convertible preferred shares owned by Flagship Desun Shares Co., Limited, or Flagship, a Hong Kong company with its registered address at 79 Robinson Road, 1501, CPF Building, Singapore 068897 and 701,550 ordinary shares owned by Flagship. 29.29%, 12.66% and 58.05% of the equity interest of Flagship is held by Hupomone Capital Fund, L.P., Flagship Capital Corporation (Mauritius) and Flagship Capital Corporation (Singapore) Ltd., respectively. Flagship Capital Corporation (Singapore) Ltd. is held by several entities and individuals, among which, Asian Development Bank and Shamil Bank of Bahrain are the largest shareholders, each holding 33.06% of the ordinary shares and 33.06% of the preference shares of Flagship Capital Corporation (Singapore) Ltd. Flagship Capital Corporation (Mauritius) is owned by the government of Malaysia. Mr. Kok Pun Chan, one of the two directors of Flagship Desun Shares Co., Limited., owns Hupomone Capital General Partner (Cayman Islands) Ltd., the general partner of Hupomone Capital Fund, L.P. Mr. Eduardo Lerma David is the other director of Flagship Desun Shares Co., Limited. The board of directors of Flagship Desun Shares Co., Limited has voting or dispositive power over the shares held by Flagship Desun Shares Co., Limited, and the directors of Flagship Desun Shares Co., Limited collectively have voting or dispositive powers of the shares held by Flagship Desun Shares Co., Limited.

 

(11)   Includes 2,805,500 ordinary shares issuable upon conversion of series B redeemable convertible preferred shares held by SCGC Capital Holding Company Limited, 1,429,850 ordinary shares owned by SCGC Capital Holding Company Limited, 1,062,650 ordinary shares issuable upon conversion of series B redeemable convertible preferred shares held by CIVC Investment Ltd. and 541,600 ordinary shares owned by CIVC Investment Ltd. SCGC Capital Holding Company Limited is a limited liability company organized and existing under the laws of the British Virgin Islands with its registered address at 11F, Investment Building, No.4009 Shennan Road, Futian District, Shenzhen, China. SCGC Capital Holding Company Limited holds 50% of the ordinary shares and 50% of the preference shares of CIVC Investment Ltd., a Cayman Islands company, with its registered address at c/o ATC (Hong Kong) Ltd., Suit 3713, The Center Building, 99 Queen’s Road, Central, Hong Kong. SCGC Capital Holding Company Limited is a wholly-owned subsidiary of Shenzhen Capital (Hong Kong) Company Limited, which is in turn a wholly-owned subsidiary of Shenzhen Capital Group Co., Ltd. Shenzhen Capital Group Co., Ltd. is held by several legal entities, including several publicly listed companies. The largest shareholder of Shenzhen Capital Group Co., Ltd. is the State-owned Assets Supervision and Administration Commission of Shenzhen which directly holds 36.32% of the share capital of Shenzhen Capital Group Co., Ltd. The board of directors of SCGC Capital Holding Company Limited has voting or dispositive powers over the shares held by SCGC Capital Holding Company. Mr. Haitao Jin, Mr. Dongsheng Sun, Mr. Qing Fan, Mr. Wanshou Li and Mr. Rongzhi Liu are the directors of SCGC Capital Holding Company Limited. These individuals collectively have voting or dispositive powers of the shares held by SCGC Capital Holding Company Limited.

Upon completion of this offering, under the terms of our series A redeemable convertible preferred shares and series B redeemable convertible preferred shares, all outstanding series A redeemable convertible preferred shares and series B redeemable convertible preferred shares will automatically convert into ordinary shares.

 

160


Table of Contents

Each of the principal shareholders named above acquired its shares in offerings which were exempted from registration under the Securities Act because they involved either private placements or offshore sales to non-U.S. persons.

As of the date of this prospectus, none of our outstanding ordinary shares, series A redeemable convertible preferred shares and series B redeemable convertible preferred shares are held by record holders in the United States.

None of our shareholders has different voting rights from other shareholders after the closing of this offering. We and our existing shareholders have agreed to take all steps necessary to maintain three directors appointed by Xiande Li, Kangping Chen and Xianhua Li, one director appointed by Flagship and one director appointed by the holders of our series B redeemable convertible preferred shares on our board of directors until expiry of the lock-up period provided in the underwriting agreement.

 

161


Table of Contents

RELATED PARTY TRANSACTIONS

Pursuant to our audit committee charter that will become effective upon completion of this offering, all transactions or arrangements with related parties, including directors, executive officers, beneficial owners of 5% or more of our voting securities and their respective affiliates, associates and related parties, will require the prior review and approval of our audit committee, regardless of the dollar amount involved in such transactions or arrangements.

Restructuring

Share Repurchase and Share Split of JinkoSolar

On August 3, 2007, Greencastle was incorporated under the laws of the Cayman Islands. On December 4, 2007, Wholly Globe, a British Virgin Islands company controlled by our founders, acquired all the equity interest in Greencastle. On October 17, 2008, Wholly Globe distributed all the 50,000 ordinary shares of Greencastle to three companies owned by our founders and ceased to be a shareholder of Greencastle. On October 21, 2008, Greencastle changed its name to JinkoSolar Holding Co., Ltd. On December 16, 2008, we repurchased a total of 49,997 ordinary shares from the three companies, with each company holding one remaining ordinary share and reduced our share capital from US$50,000 before the repurchase to US$10,000. Subsequently, we subdivided our share capital into 10,000,000 shares consisting of 9,743,668 ordinary shares, 107,503 series A redeemable convertible preferred shares and 148,829 series B redeemable convertible preferred shares, each at par value of US$0.001 per share. As a result, each share held by each of the three companies owned by our founders was subdivided into 1,000 ordinary shares at par value of US$0.001 per share. References to numbers of shares, price per share, earnings per share and par value per share in this paragraph have not been adjusted to give effect to the 2009 Share Split discussed below.

On September 15, 2009, we effected the 2009 Share Split, pursuant to which each of the ordinary shares, series A redeemable convertible preferred shares and series B redeemable convertible preferred shares was subdivided into 50 shares of the relevant class.

Share Split of Paker

On November 10, 2006, Paker was incorporated under the laws of Hong Kong. On May 30, 2008, Paker increased its authorized number of shares by effecting a share split of 1 for 1,000 shares for its ordinary shares. As a result, the total outstanding number of shares increased to 400,000 from 400. On the same day, Paker effected a share split in the form of a stock dividend of 600,000 ordinary shares at par value of HK$0.001 to Xiande Li, Kangping Chen and Xianhua Li on a pro rata basis. Immediately after completion of the share split, Paker’s authorized number of shares increased to 10,000,000 shares with par value of HK$0.001 per share, with an aggregate of 1,000,000 outstanding ordinary shares.

Share Exchange

On December 11, 2008, we entered into a Share Subscription Agreement with Paker, Xiande Li, Kangping Chen, Xianhua Li, Wealth Plan, Flagship, Everbest, SCGC, CIVC, Pitango, TDR and New Goldensea, pursuant to which, all the shareholders of Paker exchanged the shares they held in Paker for the shares of JinkoSolar of the same classes, and as a result, Paker became our wholly-owned subsidiary.

See “Our Corporate History and Structure — Offshore Reorganization.”

Shareholders Agreement

In connection with our offshore reorganization, we entered into a shareholders agreement dated December 16, 2008, with, among others, Xiande Li, Kangping Chen, Xianhua Li, Flagship and SCGC, or the Shareholders

 

162


Table of Contents

Agreement. The Shareholders Agreement was amended on September 15, 2009. See “Description of Share Capital — History of Share Issuances and Other Financings.” The key terms of the Shareholders Agreement as amended are set forth below:

Preemptive Rights

If we decide to issue new securities to any person other than our ordinary shareholders, we must deliver a notice to holders of both series A and series B redeemable convertible preferred shares, who have the right to subscribe up to their pro rata shares of the new securities at the price and on the terms specified in the notice by providing us with a notice within 30 days after receipt of the notice of such issuance of the new securities. The preemptive rights of the holders of both series A and series B redeemable convertible preferred shares will be terminated upon the completion of this offering.

Registration Rights

We have granted registration rights to the holders of our series A and series B redeemable convertible preferred shares and to Wealth Plan in connection with the ordinary shares it holds. For a detailed description of the registration rights, see “Description of Share Capital — Registration Rights.” These registration rights will remain in effect after completion of this offering.

Indemnification

We will indemnify and hold harmless each holder of our registrable securities, or securities holder, against any losses, claims, damages or liabilities arising out of untrue statements or omissions of material facts, or any other violations of applicable securities laws by us, as long as such untrue statement, omissions, or violations do not occur in reliance upon written information furnished by any securities holder for use in connection with the registration, under which circumstances, such securities holder will indemnify us and hold us harmless against any losses, claims, damages or liabilities arising out of the untrue statement, omissions, or violations.

Appointment of Directors

We and our existing shareholders have agreed to take all steps necessary to maintain, in the board of directors, three directors appointed by Xiande Li, Kangping Chen and Xianhua Li, one director appointed by Flagship and one director appointed by the holders of our series B redeemable convertible preferred shares until expiry of the lock-up period provided in the underwriting agreement.

Transactions with Certain Directors, Shareholders and Affiliates

Transactions with Jiangxi Desun

Acquisition of Equity Interest and Share Pledge

In June 2006, Jiangxi Desun was established by Min Liang, Xiande Li and Xiafang Chen with a registered capital of RMB8 million. In January 2007, Min Liang and Xiafang Chen, who are immediate family members of Kangping Chen and Xiande Li, transferred the equity interest they held in Jiangxi Desun to Kangping Chen and Xiande Li, respectively. Given that the transfer was made between immediate family members, there was no change in the ownership of Jiangxi Desun as a result of this transfer. In January 2007, Xianhua Li, brother of Xiande Li, subscribed for the newly issued capital of Jiangxi Desun, and at the same time, Xiande Li and Kangping Chen made additional capital contributions to Jiangxi Desun, thereby increasing the registered capital of Jiangxi Desun to RMB20 million. As a result, Xiande Li, Kangping Chen and Xianhua Li became the only three shareholders of Jiangxi Desun, holding 50%, 30% and 20%, respectively, of the equity interest of Jiangxi Desun. In connection with our 2007 Restructuring, Paker subscribed for the newly issued equity interest in

 

163


Table of Contents

Jiangxi Desun at a total consideration of HK$10 million and became a holder of a 34.9% equity interest in Jiangxi Desun on February 28, 2007. After the subscription of the equity interest by Paker, Xiande Li, Kangping Chen, Xianhua Li and Paker held 32.6%, 19.5%, 13.0% and 34.9% of the equity interest in Jiangxi Desun. In May 2007, Paker, Xiande Li, Kangping Chen and Xianhua Li made additional capital contributions in the amount of HK$5 million, HK$10.1 million, HK$6.1 million and HK$4.1 million, respectively, to Jiangxi Desun and changed their equity interest holding percentages in Jiangxi Desun to 27.0%, 36.5%, 21.9% and 14.6%, respectively. In August 2007, Paker, Xiande Li, Kangping Chen and Xianhua Li made additional capital contributions in the amount of HK$7.5 million, HK$10.1 million, HK$6.1 million and HK$4.1 million, respectively, to Jiangxi Desun on a pro rata basis.

On February 27, 2007, Paker, Xiande Li, Kangping Chen and Xianhua Li entered into a share pledge agreement, or the share pledge agreement, pursuant to which Xiande Li, Kangping Chen and Xianhua Li pledged their equity interest in Jiangxi Desun to Paker and waived all their voting rights and other beneficial rights in Jiangxi Desun. As a result of such share pledge agreement, Paker obtained 100% of the voting control over and economic interest in Jiangxi Desun, while Xiande Li, Kangping Chen and Xianhua Li continued to retain the ownership of the equity interest of Jiangxi Desun.

On July 25, 2008, Paker, Xiande Li, Kangping Chen and Xianhua Li entered into a share pledge termination agreement, pursuant to which the parties terminated the share pledge agreement. In December 2008, Jiangxi Desun distributed after-tax profit in an amount of RMB57.8 million to Paker under the terms of the share pledge agreement.

As part of our 2008 Restructuring, on July 28, 2008, Paker sold all the equity interest it held in Jiangxi Desun to a third party. As the result of the 2008 Restructuring, our founders and substantial shareholders, Xiande Li, Kangping Chen and Xianhua Li each holds more than 10%, and collectively hold an aggregate of 73%, of the equity interest in Jiangxi Desun.

Equipment Purchase and Plant Leasing

As part of our 2008 Restructuring, in February 2008, Jiangxi Jinko acquired office equipment at approximately RMB430.0 thousand in cash from Jiangxi Desun.

In addition, on January 1, 2008, Jiangxi Jinko entered into a plant leasing agreement with Jiangxi Desun, pursuant to which Jiangxi Jinko leased plants with an aggregate gross floor area of approximately 15,282 square meters from Jiangxi Desun. The annual rent under this leasing agreement is RMB1,100,304 and the lease term is ten years.

Guarantees

Historically, Jiangxi Jinko and Jiangxi Desun provided guarantees for each other’s loan repayment obligations. On April 3, 2008, in connection with a loan agreement between Jiangxi Desun and Industrial Bank Co., Ltd., Nanchang Branch, or Nanchang Industrial Bank, for a short-term loan in the principal amount of RMB11.0 million, Jiangxi Jinko entered into a guarantee agreement with Nanchang Industrial Bank, pursuant to which Jiangxi Jinko guaranteed Jiangxi Desun’s obligations to repay the loan on March 28, 2009.

On July 15, 2008, in connection with a loan agreement between Jiangxi Jinko and Nanchang Industrial Bank for a short-term loan in the principal amount of RMB10.0 million, Jiangxi Desun entered into a guarantee agreement with Nanchang Industrial Bank, pursuant to which Jiangxi Desun provided a guarantee for Jiangxi Jinko’s obligations to repay the loan on July 3, 2009.

These two loans were duly repaid on February 6, 2009 by Jiangxi Jinko and Jiangxi Desun respectively, whereupon the two corresponding guarantee agreements ceased to be effective.

 

164


Table of Contents

On May 21, 2009, Jiangxi Desun entered into a guarantee agreement with China Merchants Bank, Nanchang Zhan Qian Xi Lu sub-branch, or Zhan Qian Xi Lu China Merchants Bank, pursuant to which Jiangxi Desun has agreed to guarantee in full Jiangxi Jinko’s repayment obligation to Zhan Qian Xi Lu China Merchants Bank of up to RMB20 million under the credit line agreement between Jiangxi Jinko and Zhan Qian Xi Lu China Merchants Bank dated May 21, 2009. As of December 31, 2009, the principal outstanding amount under the credit line, and subject to the guarantee, was RMB20.0 million (US$2.9 million).

Mortgage

On May 14, 2009, in connection with a loan agreement between Jiangxi Jinko and Shangrao Bank of China, for a short-term loan in the principal amount of RMB17 million, Jiangxi Desun entered into a mortgage contract with Shangrao Bank of China, pursuant to which Jiangxi Desun secured Jiangxi Jinko’s obligations to repay the loan with its assets.

See “Our Corporate History and Structure — Our Domestic Restructuring” for details regarding acquisition of equity interest, share pledge, equity purchase and plant leasing described above.

Transactions with ReneSola Ltd.

Since our inception in June 2006, we have sold recovered silicon materials to Zhejiang Yuhui Solar Energy Source Co., Ltd., or Zhejiang Yuhui, a subsidiary of ReneSola, a company controlled by Xianshou Li, brother of Xiande Li and Xianhua Li. For the years ended December 31, 2007 and 2008, we sold RMB379.0 million and RMB584.0 million, respectively, of recovered silicon materials to Zhejiang Yuhui.

In July 2007, Jiangxi Desun entered into a supply contract with Zhejiang Yuhui, pursuant to which Jiangxi Desun agreed to supply Zhejiang Yuhui with 240 metric tons of recovered silicon materials in 2008, with the price subject to renegotiation if the change in the market prices exceeds the benchmark provided in the supply contract. In May 2008, Jiangxi Jinko entered into an assignment agreement with Zhejiang Yuhui and Jiangxi Desun, under which Jiangxi Desun transferred all its rights and obligations under the supply contract with Zhejiang Yuhui to Jiangxi Jinko.

In 2008, we sold RMB45 million of monocrystalline ingots to Zhejiang Yuhui.

In 2007 and 2008, we provided processing services to Zhejiang Yuhui, with service fees of RMB2.4 million and RMB2.9 million, respectively.

In 2009, we sold RMB28.0 million (US$4.1 million) of recovered silicon materials and provided processing services of RMB0.3 million (US$0.04 million) to Zhejiang Yuhui.

We received an aggregate of approximately RMB487.6 million and RMB465.8 million of prepayments from Zhejiang Yuhui under our supply contracts with Zhejiang Yuhui in 2007 and 2008, respectively. Advances from Zhejiang Yuhui amounted to RMB92.4 million and nil as of December 31, 2007 and 2008, respectively.

In addition, we purchased RMB26.3 million of multicrystalline wafers from Zhejiang Yuhui in order to fulfill our obligations under existing sales contracts in 2008.

As of December 31, 2008, our accounts receivable due from Zhejiang Yuhui amounted to RMB69.1 million.

As of December 31, 2009, our accounts receivable due from Zhejiang Yuhui amounted to RMB100.4 thousand (US$14.7 thousand).

 

165


Table of Contents

These transactions were entered into on an arm’s length basis, and we believe the pricing terms were comparable to terms that could have been obtained from independent third parties. As of December 31, 2009, we did not have any outstanding sales contracts with ReneSola or its subsidiaries.

Transactions with Zhejiang Yuhuan Solar Energy Source Co. Ltd.

In September 2007, we entered into a short-term loan agreement with Zhejiang Yuhuan Solar Energy Source Co. Ltd, or Yuhuan Solar, a PRC company controlled by Mr. Xianshou Li, brother of Xiande Li and Xianhua Li, pursuant to which we provided a RMB17.0 million short-term loan to Yuhuan Solar. The loan was due in September 2008. The loan was interest-free, unsecured and payable on demand. The loan was repaid by ReneSola in August 2008.

Transaction with Global Trade International Industrial Limited

In 2007, we purchased RMB22.2 million of raw materials from Global Trade, a Hong Kong company owned by Xiafang Chen, a sister of Kangping Chen and the wife of Xiande Li in 2007. Xiafang Chen disposed her equity interest in Global Trade in December 2007 and was no longer a shareholder of Global Trade.

Cash Advances, Loans and Guarantees

As of December 31, 2007, 2008 and 2009, amounts due from related parties were RMB17.1 million, RMB69.1 million and RMB100.4 thousand (US$14.7 thousand), respectively.

 

   

As of December 31, 2007, amounts due from related parties included cash advances of RMB20.0 thousand, RMB57.5 thousand and RMB0.5 thousand to Huanwen Zhou, Min Yang and Xuejiao Chen, respectively. Xuejiao Chen is the sole owner of Tiansheng since November 27, 2007. The advances were traveling advances and were unsecured, interest free and had no fixed repayment term and were fully repaid by September 2008.

 

   

As of December 31, 2008, we had an amount due from Zhejiang Yuhui of RMB69.1 million under our supply contract with Zhejiang Yuhui. This amount due from Zhejiang Yuhui was unsecured and interest free.

 

   

As of December 31, 2009, we had an amount due from Zhejiang Yuhui of RMB100.4 thousand (US$14.7 thousand) under our supply contract with Zhejiang Yuhui. This amount due from Zhejiang Yuhui was unsecured and interest free.

As of December 31, 2007, 2008 and 2009, amounts due to related parties were approximately RMB164.7 million, nil and RMB550.2 thousand (US$80.6 thousand), respectively.

 

   

As of December 31, 2007, amounts due to related parties included loans of RMB7.5 million, RMB3.0 million and RMB150 thousand from Kangping Chen, Xianhua Li and Huanwen Zhou, respectively. These loans, which were used to satisfy our short-term working capital needs, were unsecured, interest free and had no fixed repayment term and have been fully repaid. Amounts due to related parties as of December 31, 2007 also included long-term payables of RMB30.8 million, RMB18.5 million and RMB12.3 million to Xiande Li, Kangping Chen, Xianhua Li, respectively. These long-term payables represented equity investment in Jiangxi Desun by the shareholders.

 

   

As of December 31, 2009, amount due to related parties included other payables to Jiangxi Desun for leasing of land buildings of RMB550.2 thousand (US$80.6 thousand).

Each of Xiande Li, Kangping Chen and Xianhua Li entered into a guarantee agreement with Shangrao Bank of China, in February and March 2009 pursuant to which each of Xiande Li, Kangping Chen and Xianhua Li has agreed to guarantee in full Jingko’s repayment obligation to Shangrao Bank of China of up to RMB400 million during the period from December 25, 2008 to December 25, 2012. As of December 31, 2009, the principal amount outstanding, and subject to the guarantee, was RMB273.0 million (US$40.0 million).

 

166


Table of Contents

Each of Xiande Li, Kangping Chen and Xianhua Li entered into a guarantee agreement with Zhan Qian Xi Lu China Merchants Bank on May 21, 2009, pursuant to which each of Xiande Li, Kangping Chen and Xianhua Li has agreed to guarantee in full Jiangxi Jinko’s repayment obligation to Zhan Qian Xi Lu China Merchants Bank of up to RMB20 million under the credit line agreement between Jiangxi Jinko and Zhan Qian Xi Lu China Merchants Bank dated May 21, 2009. As of December 31, 2009, the principal outstanding amount under the credit line and subject to the guarantee was RMB20 million (US$2.9 million).

Each of Xiande Li, Kangping Chen and Xianhua Li issued an individual unlimited liability guarantee letter to Shangrao Bank of China in December 2008, pursuant to which each of Xiande Li, Kangping Chen and Xianhua Li has agreed to guarantee in full Jiangxi Jinko’s repayment obligation to Shangrao Bank of China of up to RMB100 million under a credit line agreement between Jiangxi Jinko and Shangrao Bank of China dated December 25, 2008. As of December 31, 2009, the principal outstanding amount under this credit line agreement and subject to the guarantee was RMB56.0 million (US$8.2 million).

Each of Xiande Li, Kangping Chen and Xianhua Li will guarantee in full Jiangxi Jinko’s repayment obligation to Jiangxi Heji Investment Co., Ltd. under the loan agreement between Jiangxi Heji Investment Co., Ltd. and Jiangxi Jinko dated June 13, 2009 in relation to a three-year loan in the principal amount of RMB100 million. We borrowed RMB50.0 million from Heji Investment under the Heji Loan Agreement. In September and October 2009, we and Heji Investment re-arranged our borrowings under the Heji Loan Agreement into entrusted loans with an aggregate principal amount of RMB50.0 million pursuant to the Entrusted Loan Agreements with Agricultural Bank of China. In connection with the Entrusted Loan Agreements, our founders have entered into a maximum guarantee agreement with Agricultural Bank of China, pursuant to which our founders have agreed to guarantee Jiangxi Jinko’s obligation to repay loans issued by Agricultural Bank of China to Jiangxi Jinko from June 8, 2009 to June 7, 2012 of up to RMB50.0 million.

On June 28, 2009, Jiangxi Jinko and Haining Asset Management Co., Ltd., or Haining Asset, entered into a share pledge agreement, pursuant to which Jiangxi Jinko pledged its equity interest in Zhejiang Jinko to Haining Asset to guarantee Zhejiang Jinko’s repayment obligations under a loan agreement with Bank of China, Haining Branch, or Haining Bank of China with the principal amount of RMB50 million, which is guaranteed by Haining Asset. As of the date of this prospectus, the loan subject to the guarantee has been fully repaid and the share pledge agreement has been terminated.

On October 13, 2009, Xiande Li entered into a guarantee agreement with Haining Bank of China, pursuant to which Xiande Li has agreed to guarantee Zhejiang Jinko’s repayment obligation to Haining Bank of China of up to RMB50 million under a credit line agreement between Zhejiang Jinko and Haining Bank of China and other financing or credit arrangements between Zhejiang Jinko and Haining Bank of China during the period from October 13, 2009 to October 12, 2010.

Share Incentives

See “Management — Share Incentive Plan”.

Employment Agreements and Indemnification Agreements

We have entered into employment agreements with each of our senior executive officers. Under these agreements, each of our executive officers is employed for three years after this offering unless they are terminated for cause by either party. We may terminate a senior executive officer’s employment for cause at any time, without prior notice or remuneration, for certain acts of the officer, including, but not limited to, failure to satisfy our job requirements during the probation period, a material violation of our regulations, failure to perform agreed duties, embezzlement that causes material damage to us, or conviction of a crime. A senior executive officer may terminate his or her employment for cause at any time, including, but not limited to, our

 

167


Table of Contents

failure to pay remuneration and benefits or to provide a safe working environment pursuant to the employment agreement, or our engagement in deceptive or coercive conduct that causes him or her to sign the agreement. If a senior executive officer breaches any terms of the agreement, which leads to results, including, but not limited to, termination of the agreement, resignation without notice, or failure to complete resignation procedures within the stipulated period, he or she shall be responsible for our economic losses and shall compensate us for such losses.

We have also entered into indemnification agreements with all of our directors, under which we agree to indemnify our directors for certain losses arising from actions taken in their capacities as our directors if certain conditions specified in the indemnification agreements are satisfied.

See also “Management — Employment Agreements” for details regarding employment agreements with our directors.

 

168


Table of Contents

REGULATION

This section sets forth a summary of the most significant regulations or requirements that affect our business activities in China or our shareholders’ right to receive dividends and other distributions from us.

Renewable Energy Law and Other Government Directives

In February 2005, China enacted its Renewable Energy Law, which became effective on January 1, 2006 and was revised on December 26, 2009. The revised Renewable Energy Law, which became effective on April 1, 2010, sets forth policies to encourage the development and use of solar energy and other non-fossil energy and their on-grid application. It also authorizes the relevant pricing authorities to set favorable prices for the purchase of electricity generated by solar and other renewable power generation systems.

The law also sets forth the national policy to encourage the installation and use of solar energy water-heating systems, solar energy heating and cooling systems, solar photovoltaic systems and other solar energy utilization systems. It also provides financial incentives, such as national funding, preferential loans and tax preferential treatment for the development of renewable energy projects.

In January 2006, China’s National Development and Reform Commission promulgated an implementation directive for the renewable energy power generation industry. This directive sets forth specific measures for setting the price of electricity generated by solar and other renewable power generation systems and in sharing the costs incurred. The directive also allocates administrative and supervisory authorities among different government agencies at the national and provincial levels and stipulates the responsibilities of electricity grid companies and power generation companies with respect to the implementation of the renewable energy law.

On January 23, 2007, China’s National Development and Reform Commission, Ministry of Science and Technology, Ministry of Commerce, State Intellectual Property Office promulgated the Guidelines of Prioritized Hi-tech Industrialization Areas in 2007, in which solar power industry ranked prominently.

On August 31, 2007, China’s National Development and Reform Commission promulgated the Medium and Long-Term Development Plan for the Renewable Energy Industry. This plan sets forth national policy to provide financial allowance and preferential tax regulations for the renewable energy industry. A similar demonstration of PRC government commitment to renewable energy is also stipulated in the Eleventh Five-Year Plan for Renewable Energy Development, which was promulgated by China’s National Development and Reform Commission in March 2008.

China’s Ministry of Construction also issued a directive in June 2005, which seeks to expand the use of solar energy in residential and commercial buildings and encourages the increased application of solar energy in various townships. In addition, China’s State Council promulgated a directive in July 2005, which sets forth specific measures to conserve energy resources. Additionally, on April 1, 2008, the PRC Energy Conservation Law came into effect. Among other objectives, this law encourages the utilization and installation of Solar Power Facilities to buildings for energy-efficiency purposes.

On September 4, 2006, China’s Ministry of Finance and Ministry of Construction jointly promulgated the Interim Measures for Administration of Special Funds for Application of Renewable Energy in Building Construction, which provide that the Ministry of Finance will arrange special funds to support the application of renewable energy in building construction in order to enhance building energy efficiency, protect the ecological environment and reduce the consumption of fossil energy. Under these measures, application of solar energy in hot water supply, refrigeration and heating, photovoltaic technology and lighting which are integrated into building construction is a major field supported by such special funds.

On March 23, 2009, China’s Ministry of Finance promulgated the Interim Measures for Administration of Government Subsidy Funds for Application of Solar Photovoltaic Technology in Building Construction, or the

 

169


Table of Contents

Interim Measures, to support the demonstration and the promotion of solar photovoltaic application in China. Local governments are encouraged to issue and implement supporting policies for the development of solar photovoltaic technology. Under these Interim Measures, the subsidy, which is set at RMB20 per kWp for 2009, covers solar photovoltaic technology integrated into building construction. The Interim Measures do not apply to the projects completed before March 23, 2009, the promulgation date of the Interim Measures.

On July 16, 2009, China’s Ministry of Finance, Ministry of Science and Technology and Resource Bureau of the National Development and Reform Commission jointly published an announcement containing the guidelines for the “Golden Sun” demonstration program. Under the program, the PRC government will provide up to 20 MW of PV projects per province with a 50% - 70% subsidy for the capital costs of PV systems and the relevant power transmission and distribution systems, with the aim to industrialize and expand the scale of China’s solar power industry. The program further provides that each PV project must have a minimum capacity of 300 kWp and be completed within one year with an operation term of not less than 20 years.

On September 26, 2009, the PRC State Council approved and circulated the Opinions of National Development and Reform Commission and other Nine Governmental Authorities on Restraining the Production Capacity Surplus and Duplicate Construction in Certain Industries and Guiding the Industries for Healthy Development. These opinions concluded that polysilicon production capacity in China has exceeded the demand and adopted the policy of imposing more stringent requirements on the construction of new projects for manufacturing polysilicon in China. These opinions also stated in general terms that the government should encourage polysilicon manufacturers to enhance cooperation and affiliation with downstream solar product manufacturers to extend their product lines. However, these opinions do not provide any detailed measures for the implementation of this policy. As we are not a polysilicon manufacturer and do not expect to manufacture polysilicon in the future, we believe the issuance and circulation of these opinions will not have any material impact on our business or our silicon wafer, solar cell and solar module capacity expansion plans.

Environmental Regulations

We believe our solar power product manufacturing processes generate material levels of noise, waste water, gaseous emissions and other industrial wastes in the course of our business operations. We are subject to a variety of government regulations related to the storage, use and disposal of hazardous materials. The major environmental regulations applicable to us include the Environmental Protection Law of the PRC, the PRC Law on the Prevention and Control of Noise Pollution, the PRC Law on the Prevention and Control of Air Pollution, the PRC Law on the Prevention and Control of Water Pollution, the PRC Law on the Prevention and Control of Solid Waste Pollution, the PRC Law on Evaluation of Environmental Affects and the Regulations on the Administration of Construction Project Environmental Protection. See “Risk Factors — Risks Related to Our Business and Our Industry — Compliance with environmental and safe production regulations can be costly, while non-compliance with such regulations may result in adverse publicity and potentially significant monetary damages, fines and suspension of our business operations.”

Restriction on Foreign Businesses

The principal regulation governing foreign ownership of solar power businesses in the PRC is the Foreign Investment Industrial Guidance Catalogue. Under the current catalogue, which was amended in 2007 and become effective on December 1, 2007, the solar power business is classified as an “encouraged foreign investment industry.”

Tax

PRC enterprise income tax is calculated based on taxable income determined under PRC accounting principles and adjustments in line with the tax laws and regulations. In accordance with the PRC Income Tax Law on Foreign Invested Enterprise and Foreign Enterprise, or the former Income Tax Law, and the related

 

170


Table of Contents

implementing rules, foreign-invested enterprises incorporated in the PRC were generally subject to an enterprise income tax of 30% on taxable income and a local income tax of 3% of taxable income. The former Income Tax Law and the related implementing rules provided certain favorable tax treatments to foreign-invested enterprises. For instance, beginning with its first year of profitability, a foreign invested manufacturing enterprise with an operation period of no less than ten years would be eligible for an enterprise income tax exemption of two years followed by a three-year 50% reduction in its applicable enterprise income tax rate.

The effective income tax rate applicable to us in China depends on various factors, such as tax legislation, the geographic composition of our pre-tax income and non-tax deductible expenses incurred.

On March 16, 2007, the National People’s Congress, the Chinese legislature passed the new Enterprise Income Tax Law, which became effective on January 1, 2008. On December 6, 2007, the State Council approved and promulgated the Implementation Rules of PRC Enterprise Income Tax Law, which took effect simultaneously with the new Enterprise Income Tax Law. However, a number of detailed implementation regulations are still in the process of promulgation.

The new Enterprise Income Tax Law applies a uniform 25% enterprise income tax rate to both foreign-invested enterprises and domestic enterprises and eliminates many of the preferential tax policies afforded to foreign investors. Furthermore, dividends out of post-2007 earnings paid by a foreign-invested enterprise to a non-resident shareholder are now subject to a withholding tax of 10%, which may be reduced under any applicable bi-lateral tax treaty between China and the jurisdiction where the non-resident shareholder resides. According to the Administrative Measures for Non-Residents Enjoying Tax Treaty Benefits (Trial Implementation) issued by the State Administration of Taxation on August 24, 2009 which became effective on October 1, 2009, the application of the preferential withholding tax rate under bi-lateral tax treaty is subject to the approval of competent PRC tax authority. According to the Circular of the State Administration of Taxation on How to Understand and Identify “Beneficial Owner” under Tax Treaties which became effective on October 27, 2009, the PRC tax authorities must evaluate whether an applicant for treaty benefits in respect of dividends, interest and royalties qualifies as a “beneficial owner” on a case-by-case basis and following the “substance over form” principle. This circular sets forth the criteria to identify a “beneficial owner” and provides that an applicant that does not carry out substantial business activities, or is an agent or a conduit company may not be deemed as a “beneficial owner” of the PRC subsidiary and therefore may not enjoy tax treaty benefits.

An enterprise registered under the laws of a jurisdiction outside China may be deemed a Chinese tax resident if its place of effective management is in China. If an enterprise is deemed to be a Chinese tax resident, its worldwide income will be subject to the enterprise income tax. According to the implementation rules of the new Enterprise Income Tax Law, the term “de facto management bodies” is defined as bodies that have, in substance, and overall management and control over such aspects as the production and the business, personnel, accounts and properties of the enterprise. In addition, under the new Enterprise Income Tax Law, foreign shareholders could become subject to a 10% income tax on any gains they realized from the transfer of their shares, if such gains are regarded as income derived from sources within China, and the enterprise in which their shares invested is considered a “tax resident enterprise” in China. Once a non-Chinese company is deemed to be a Chinese tax resident by following the “place of effective management” concept and any dividend distributions from such company are regarded as income derived from sources within China, Chinese income tax withholding may be imposed and applied to dividend distributions from the deemed Chinese tax resident to its foreign shareholders.

The EIT Law provides a five-year grandfathering period, starting from its effective date, for those enterprises established before the promulgation date of the EIT Law and which that were entitled to enjoy preferential tax policies under then prevailing former Income Tax Law or regulations.

However, subject to the Circular by the PRC State Council on the Implementation of the Grandfathering Preferential Policies under the PRC Enterprise Income Tax Law (Decree No. [2007] 39), or the Implementation

 

171


Table of Contents

Circular, promulgated on December 26, 2007, only a certain number of the preferential policies provided under the former Income Tax Law, regulations, and documents promulgated under the legal authority of the State Council are eligible to be grandfathered in accordance with Implementation Circular.

While many former preferential tax treatments became null and void after the effectiveness of the EIT Law, according to relevant requirements defined in the Implementation Rules of PRC Income Tax Law and other relevant regulations, enterprises may continue to enjoy a preferential tax rate of 15% if they qualify as “high and new technology enterprises specially supported by the PRC government”.

Subject to the recently promulgated circular by the PRC State Council on the Implementation of the Grandfathering Preferential Policies under the PRC Enterprise Income Tax Law (Decree No. [2007] 39), or the Implementation Circular, only a certain number of the preferential policies provided under the former Income Tax Law, regulations, and documents promulgated under the legal authority of the State Council are eligible to be grandfathered in accordance with the Implementation Circular. With respect to our PRC operations, only the “two-year exemption” and “three-year half deduction” tax preferential policy enjoyed by Jiangxi Jinko is included in the scope of those grandfathered by the Implementation Circular. Therefore, from January 1, 2008, Jiangxi Jinko has been exempted from income tax till December 31, 2009 and will be subject to a preferential tax rate of 12.5% for three years afterwards.

Pursuant to the PRC Individual Income Tax Law, or the Individual Income Tax Law, adopted on December 29, 2007, individuals who are domiciled in China or who are not domiciled but have resided in China for at least one year shall pay individual income taxes in accordance with the Law on income derived from sources in and outside China. For those individuals who are neither domiciled in nor residents of China, or who are not domiciled and reside for less than one year in China, shall pay individual income taxes in accordance with this Law on income derived from sources within the PRC.

Pursuant to the Provisional Regulation and its Implementing Rules, all entities and individuals that were engaged in the sale of goods, the provision of repairs and replacement services and the importation of goods in China are required to pay VAT. According to the Provisional Regulation, gross proceeds from sales and importation of goods and provision of services are generally subject to a VAT rate of 17% with exceptions for certain categories of goods that are taxed at a VAT rate of 13%. When exporting goods, the exporter is entitled to a portion of or all the refund of VAT that it has already paid or borne. In addition, under the current Provisional Regulation, the input VAT for the purchase of fixed assets is deductible from the output VAT, except for fixed assets used in non-VAT taxable items, VAT exempted items and welfare activities, or for personal consumption. According to former VAT levy rules, equipment imported for qualified projects is entitled to import VAT exemption and the domestic equipment purchased for qualified projects is entitled to VAT refund. However, such import VAT exemption and VAT refund were both eliminated as of January 1, 2009.

Foreign Currency Exchange

Foreign currency exchange regulation in China is primarily governed by the following rules:

 

   

Foreign Currency Administration Rules (1996), as amended, or the Exchange Rules; and

 

   

Administration Rules of the Settlement, Sale and Payment of Foreign Exchange (1996), or the Administration Rules;

Currently, the Renminbi is convertible for current account items, including the distribution of dividends, interest payments, trade and service-related foreign exchange transactions. Conversion of Renminbi for most capital account items, such as direct investment, security investment and repatriation of investment, however, is still subject to registration with the PRC State Administration of Foreign Exchange, or SAFE.

Under the Exchange Rules, foreign-invested enterprises may buy, sell and/or remit foreign currencies at those financial institutions engaged in foreign currency settlement and sale after providing valid commercial

 

172


Table of Contents

documents and, in the case of most capital account item transactions, obtaining approval from the SAFE. Capital investments by foreign enterprises are also subject to limitations, which include approvals by the Ministry of Commerce, the State Reform and Development Commission and registration within SAFE.

Dividend Distribution

The principal regulations governing distribution of dividends paid by wholly foreign owned enterprises include:

 

   

Wholly Foreign Owned Enterprise Law (1986), as amended; and

 

   

Wholly Foreign Owned Enterprise Law Implementation Rules (1990), as amended.

Under these regulations, foreign-invested enterprises in China may pay dividends only out of their accumulated profits, if any, determined in accordance with PRC accounting standards and regulations. In addition, a wholly foreign owned enterprise in China is required to set aside at least 10.0% of their after-tax profit based on PRC accounting standards each year to its general reserves until the accumulative amount of such reserves reach 50.0% of its registered capital. These reserves are not distributable as cash dividends. Foreign-invested enterprise has the discretion to allocate a portion of its after-tax profits to staff welfare and bonus funds and expansion funds, which may not be distributed to equity owners except in the event of liquidation.

Regulation of Foreign Exchange in Certain Return Investment Activities

In October 2005, the PRC State Administration of Foreign Exchange, or SAFE, issued the Notice on Issues Relating to the Administration of Foreign Exchange in Fund-raising and Return Investment Activities of Domestic Residents Conducted via Offshore Special Purpose Companies, or SAFE Notice 75, which became effective as of November 1, 2005, and was further supplemented by an implementing notice issued by the SAFE on November 24, 2005. SAFE Notice 75 suspends the implementation of two prior regulations promulgated in January and April of 2005 by SAFE. SAFE Notice 75 states that Chinese residents, whether natural or legal persons, must register with the relevant local SAFE branch prior to establishing or taking control of an offshore entity established for the purpose of overseas equity financing involving onshore assets or equity interests held by them. The term “Chinese legal person residents” as used in the SAFE Notice 75 refers to those entities with legal person status or other economic organizations established within the territory of China. The term “Chinese natural person residents” as used in the SAFE Notice 75 includes all Chinese citizens and all other natural persons, including foreigners, who habitually reside in China for economic benefit. The SAFE implementing notice of November 24, 2005 further clarifies that the term Chinese natural person residents as used under SAFE Notice 75 refers to those “Chinese natural person residents” defined under the relevant PRC tax laws and those natural persons who hold any interests in domestic entities which are classified as “domestic-funding” interests.

Chinese residents are required to complete amended registrations with the local SAFE branch upon (i) injection of equity interests or assets of an onshore enterprise into an offshore entity, or (ii) subsequent overseas equity financing by such offshore entity. Chinese residents are also required to complete amended registrations or filing with the local SAFE branch within 30 days of any material change in the shareholding or capital of the offshore entity, such as changes in share capital, share transfers and long-term equity or debt investments, and providing security. Chinese residents who have already incorporated or gained control of offshore entities that have made onshore investment in China before SAFE Notice 75 was promulgated must register their shareholding in the offshore entities with the local SAFE branch on or before March 31, 2006.

Under SAFE Notice 75, Chinese residents are further required to repatriate back into China all of their dividends, profits or capital gains obtained from their shareholdings in the offshore entity within 180 days of their receipt of such dividends, profits or capital gains. According to the Exchange Rules further amended in August 2008 Chinese residents are allowed to reserve foreign exchange income outside China. However, it is still subject to the further interpretations by SAFE with respect to the terms and conditions for such reservation. The

 

173


Table of Contents

registration and filing procedures under SAFE Notice 75 are prerequisites for other approval and registration procedures necessary for capital inflow from the offshore entity, such as inbound investments or shareholders loans, or capital outflow to the offshore entity, such as the payment of profits or dividends, liquidating distributions, equity sale proceeds, or the return of funds upon a capital reduction.

To further clarify the implementation of Circular 75, the SAFE issued Circular No. 106 on May 29, 2007. Under Circular No. 106, PRC subsidiaries of an offshore special purpose company are required to coordinate and supervise the filing of SAFE registrations by the offshore holding company’s shareholders who are PRC residents in a timely manner. If these shareholders fail to comply, the PRC subsidiaries are required to report to the local SAFE authorities. If the PRC subsidiaries of the offshore parent company do not report to the local SAFE authorities, they may be prohibited from distributing their profits and proceeds from any reduction in capital, share transfer or liquidation to their offshore parent company and the offshore parent company may be restricted in its ability to contribute additional capital into its PRC subsidiaries. Moreover, failure to comply with the above SAFE registration requirements could result in liabilities under PRC laws for evasion of foreign exchange restrictions.

Regulations of Merger and Acquisition and Overseas Listings

On August 8, 2006, six PRC governmental and regulatory agencies, including MOFCOM and the CSRC, promulgated a rule entitled “Provisions regarding Mergers and Acquisitions of Domestic Enterprises by Foreign Investors,” or Circular 10, which became effective on September 8, 2006.

Article 11 of Circular 10 requires PRC domestic enterprises or domestic natural persons to obtain the prior approval of MOFCOM when an offshore company established or controlled by them proposes to merge with or acquire a PRC domestic company with which such enterprises or persons have a connected relationship.

Our founders and Paker obtained the approval of the Foreign Trade and Economic Cooperation Department of Jiangxi Province, or Jiangxi MOFCOM, for the acquisition and the share pledge in the 2007 Restructuring, or the 2007 acquisition and pledge. However, because our founders are PRC natural persons and they controlled both Paker and Jiangxi Desun at the time of the 2007 Restructuring, the 2007 acquisition and pledge would be subject to Article 11 of Circular 10 and therefore subject to approval by MOFCOM at the central governmental level.

To remedy this past non-compliance with Circular 10 in connection with the 2007 Restructuring, we undertook the 2008 Restructuring. Furthermore, on November 11, 2008, Jiangxi MOFCOM confirmed in its written reply to us that there had been no modification to the former approvals for the 2007 acquisition and pledge and Paker’s transfer of its equity interest in Jiangxi Desun to Long Faith, and we could continue to rely on those approvals for further transactions. Our PRC counsel, Chen & Co. Law Firm, has advised us that, based on their understanding of current PRC laws and regulations and the confirmation in Jiangxi MOFCOM’s written reply, and because Paker has transferred all of its equity interest in Jiangxi Desun to Long Faith Creation Limited and has terminated the share pledge and has duly completed all relevant approval and registration procedures for such transfer and termination, the possibility of the approval relating to the 2007 acquisition and pledge being revoked is remote and our corporate structure currently complies in all aspects with Circular 10.

As part of our 2008 Restructuring, Jiangxi Jinko and Jiangxi Desun entered into certain transactions, or the 2008 Restructuring Transactions. Our PRC counsel, Chen & Co. Law Firm, has further advised us, based on their understanding of current PRC laws and regulations, and subject to any future rules, regulations, requirements, or interpretations to the contrary promulgated by competent PRC governmental authorities, that Circular 10, which governs the merger with or acquisition of shares or assets of PRC domestic enterprises by foreign investors for the purpose of establishing foreign-invested enterprises, does not apply to the 2008 Restructuring Transactions because we believe the 2008 Restructuring Transactions, as a whole, were not a merger with or acquisition of Jiangxi Desun’s shares or assets.

 

174


Table of Contents

Circular 10 also requires that an offshore special purpose vehicle, or SPV, which is controlled by PRC residents for the purpose of listing its rights and interests in a PRC domestic company on an overseas securities exchange through the listing of the SPV’s shares, obtain approval from the CSRC prior to publicly listing it securities on such overseas securities exchange. On September 21, 2006, the CSRC published procedures specifying documents and materials that must be submitted by SPVs seeking CSRC approval of their overseas listings.

Our PRC counsel, Chen & Co. Law Firm, has advised us, based on their understanding of current PRC laws and regulations, and subject to any future rules, regulations, requirements, or interpretations to the contrary promulgated by competent PRC governmental authorities, that CSRC approval is not required for our initial public offering or the listing of our ADSs on the NYSE because:

 

   

the CSRC approval requirement under the Circular 10 only applies to overseas listings of SPVs that have used their existing or newly issued equity interest to acquire existing or newly issued equity interest in PRC domestic companies, or the SPV-domestic company share swap, and there has not been any SPV-domestic company share swap in our corporate history; and

 

   

Paker’s interest in Jiangxi Jinko was obtained by means of green field investment, or the incorporation of Jiangxi Jinko, rather than through the acquisition of shares or assets of an existing PRC domestic enterprise.

However, the application of Circular 10 with respect to mergers and acquisitions and overseas listings of SPVs remains unclear, with no further governmental explanations regarding the requirements of MOFCOM approval and the scope of the CSRC approval requirement. See “Risk Factors — Risks Related to Doing Business in China — If we were required to obtain the prior approval of the PRC Ministry of Commerce, or MOFCOM, for or in connection with our corporate restructuring in 2007 and 2008, our failure to do so could have a material adverse effect on our business, operating results and trading price of our ADSs” and “Risk Factors — Risks Related to Doing Business in China — If we were required to obtain the prior approval of the China Securities Regulatory Commission, or CSRC, for or in connection with this offering and the listing of our ADSs on the NYSE, our failure to do so could cause the offering to be delayed or cancelled.”

 

175


Table of Contents

DESCRIPTION OF SHARE CAPITAL

Introduction

We are a Cayman Islands exempted company with limited liability and our affairs are governed by our memorandum and articles of association, as amended and restated from time to time, and the Companies Law (2009 Revision) of the Cayman Islands, which is referred to as the Companies Law below. A Cayman Islands exempted company is a company that conducts its business outside of the Cayman Islands, is exempted from certain requirements of the Companies Law, including a filing of an annual return of its shareholders with the Registrar of Companies, does not have to make its register of shareholders open to inspection and may obtain an undertaking against the imposition of any future taxation.

As of the date of this prospectus, our authorized share capital consists of 487,183,400 ordinary shares, par value of US$0.00002 each, 5,375,150 series A redeemable convertible preferred shares, par value of US$0.00002 each and 7,441,450 series B redeemable convertible preferred shares, par value of US$0.00002 each. As of the date of this prospectus, an aggregate of 50,731,450 ordinary shares, 5,375,150 series A redeemable convertible preferred shares and 7,441,450 series B redeemable convertible preferred shares were issued and outstanding. All of our issued and outstanding series A redeemable convertible preferred shares will automatically convert into ordinary shares at a conversion rate of one series A redeemable convertible preferred share to one ordinary share upon closing of this offering. All of our issued and outstanding series B redeemable convertible preferred shares will automatically convert into ordinary shares at a conversion rate of one series B redeemable convertible preferred share to approximately 1.0054 ordinary shares upon closing of this offering.

We have granted certain of our directors, officers and employees options to purchase a total of 4,536,480 ordinary shares at an exercise price of US$2.08 per share.

Upon completion of this offering, our third amended and restated memorandum and articles of association will become effective, our authorized share capital will consist of 500,000,000 ordinary shares with a par value of US$0.00002 each and there will be 86,927,850 ordinary shares issued and outstanding. The following are summaries of material provisions of our third amended and restated memorandum and articles of association and the Companies Law insofar as they relate to the material terms of our ordinary shares. You should read the forms of our third amended and restated memorandum and articles of association, which will be filed as exhibits to our registration statement on Form F-1. For information on how to obtain copies of our third amended and restated memorandum and articles of association, see “Where You Can Find Additional Information.”

Ordinary Shares

All of our outstanding ordinary shares are fully paid and non-assessable. Certificates representing the ordinary shares are issued in registered form. Our shareholders who are nonresidents of the Cayman Islands may freely hold and vote their shares.

Meetings

Subject to our third amended and restated articles of association, an annual general meeting and any extraordinary general meeting may be called by not less than 10 clear days’ notice in writing. Notice of every general meeting will be given to all our shareholders other than to such shareholders as, under the provisions of our third amended and restated articles of association or the terms of issue of the shares they hold, are not entitled to receive such notices from us, and also to our directors and auditors.

Notwithstanding that a meeting is called by shorter notice than that mentioned above, it will be deemed to have been duly called, if it is so agreed (i) in the case of a meeting called as an annual general meeting by all our shareholders entitled to attend and vote at the meeting; or (ii) in the case of any other meeting, by a majority in

 

176


Table of Contents

number of the shareholders having a right to attend and vote at the meeting, being a majority together holding not less than 95% in nominal value of the shares giving that right.

No business shall be transacted at any general meeting unless a quorum of shareholders is present at the time when the meeting proceeds to business.

Two of our members present in person or by proxy or (in the case of a member being a corporation) by its duly authorized representative representing not less than one third in the nominal value of the total issued shares in our company throughout the meeting shall form a quorum and a corporation being a shareholder shall be deemed for the purpose of our third amended and restated articles of association to be present in person if represented by its duly authorized representative being the person appointed by resolution of the directors or other governing body of such corporation to act as its representative at the relevant general meeting or at any relevant general meeting of any class of our shareholders. Such duly authorized representative shall be entitled to exercise the same powers on behalf of the corporation which he represents as that corporation could exercise if it were our individual shareholder.

Voting Rights Attaching to the Shares

Subject to any rights or restrictions attached to any shares, at any general meeting on a show of hands every shareholder who is present in person or by proxy (or, in the case of a shareholder being a corporation, by its duly authorized representative) shall have one vote, and on a poll every ordinary shareholder present in person or by proxy (or, in the case of a shareholder being a corporation, by its duly appointed representative) shall have one vote for each ordinary share of which such shareholder is the holder.

Any ordinary resolution to be passed by our shareholders requires the affirmative vote of a simple majority of the votes cast at a meeting of our shareholders, while a special resolution requires the affirmative votes of no less than two thirds of the votes cast at a meeting of our shareholders. See “— Modification of Rights.”

No shareholder shall be entitled to vote or be reckoned in a quorum, in respect of any share unless such shareholder is registered as our shareholder at the applicable record date for that meeting and all calls or installments due by such shareholder to us have been paid.

If a recognized clearing house (or its nominee(s)) is our shareholder, it may authorize such person or persons as it thinks fit to act as its representative(s) at any meeting or at any meeting of any class of shareholders provided that, if more than one person is so authorized, the authorization shall specify the number and class of shares in respect of which each such person is so authorized. A person authorized pursuant to this provision is deemed to have been duly authorized without further evidence of the facts and be entitled to exercise the same powers on behalf of the recognized clearing house (or its nominee(s)) as if such person was the registered holder of our shares held by that clearing house (or its nominee(s)).

Protection of Minorities

The Grand Court of the Cayman Islands may, on the application of shareholders holding not less than one-fifth of our shares in issue, appoint an inspector to examine our affairs and to report thereon in a manner as the Grand Court shall direct.

Any shareholder may petition the Grand Court of the Cayman Islands which may make a winding up order, if the court is of the opinion that it is just and equitable that we should be wound up.

Claims against us by our shareholders must, as a general rule, be based on the general laws of contract or tort applicable in the Cayman Islands or their individual rights as shareholders as established by our third amended and restated memorandum and articles of association.

 

177


Table of Contents

The Cayman Islands courts ordinarily would be expected to follow English case law precedents which permit a minority shareholder to commence a representative action against, or derivative actions in our name to challenge (a) an act which is ultra vires or illegal, (b) an act which constitutes a fraud against the minority and the wrongdoers are themselves in control of us, and (c) an irregularity in the passing of a resolution which requires a qualified (or special) majority.

Pre-emption Rights

There are no pre-emption rights applicable to the issue of new shares under either Cayman Islands law or our third amended and restated memorandum and articles of association.

Liquidation Rights

Subject to any special rights, privileges or restrictions as to the distribution of available surplus assets on liquidation for the time being attached to any class or classes of shares, if we shall be wound up the liquidator may, with the sanction of a special resolution and any other sanction required by the Companies Law, divide among our shareholders in kind the whole or any part of our assets (whether they shall consist of property of the same kind or not) and may, for that purpose, value any assets as the liquidator deems fair upon any asset and determine how the division shall be carried out as between our shareholders or different classes of shareholders. The liquidator may, with the like sanction, vest the whole or any part of such assets in trustees upon such trusts for the benefit of our shareholders as the liquidator, with the like sanction, shall think fit, but so that no shareholders shall be compelled to accept any asset upon which there is a liability. If we shall be wound up, and the assets available for distribution among our shareholders as such shall be insufficient to repay the whole of the paid-up capital, such assets shall be distributed so that, as nearly as may be, the losses shall be borne by our shareholders in proportion to the capital paid up, or which ought to have been paid up, at the commencement of the winding up on the shares held by them respectively. If we shall be wound up, and the assets available for distribution among our shareholders shall be more than sufficient to repay the whole of the capital paid up at the commencement of the winding up, the excess shall be distributed amongst our shareholders in proportion to the capital paid up at the commencement of the winding up on the shares held by them respectively.

Modification of Rights

Except with respect to share capital (as described below), alterations to our third amended and restated memorandum and articles of association may only be made by special resolution of no less than two thirds of votes cast at a meeting of our shareholders.

Subject to the Companies Law of the Cayman Islands, all or any of the special rights attached to shares of any class (unless otherwise provided for by the terms of issue of the shares of that class) may be varied, modified or abrogated with the sanction of a special resolution of no less than two thirds of votes cast at a meeting of our shareholders of that class.

The special rights conferred upon the holders of any class of shares shall not, unless otherwise expressly provided in the rights attaching to or the terms of issue of such shares, be deemed to be varied by the creation or issue of further shares ranking equally therewith.

Designations and Classes of Shares

Upon the closing of this offering, all of our issued shares will be ordinary shares. Our third amended and restated articles of association provide that our authorized unissued shares shall be at the disposal of our board of directors, which may offer, allot, grant options over or otherwise dispose of them to such persons, at such times and for such consideration and upon such terms and conditions as our board may in its absolute discretion determine. In particular, our board of directors is empowered to redesignate from time to time authorized and

 

178


Table of Contents

unissued ordinary shares as other classes or series of shares, to authorize from time to time the issuance of one or more series of preferred shares and to fix the designations, powers, preferences and relative, participating, optional and other rights, if any, and the qualifications, limitations and restrictions thereof, if any, including without limitation, the number of shares constituting each such class or series, dividend rights, conversion rights, redemption privileges, voting powers and liquidation preferences, and to increase or decrease the size of any such class or series.

Transfer of Shares

Subject to the restrictions of our third amended and restated articles of association, any of our shareholder may transfer all or any of his or her shares by an instrument of transfer in the usual or common form or in or such other form as prescribed by the Designated Stock Exchange or in any other form which the directors may approve. Our directors may, in their absolute discretion and without assigning any reason therefore, decline to register any transfer of any share (not being a fully paid up share). Our directors may also decline to recognize any instrument of transfer unless:

(a) the instrument of transfer is lodged with us accompanied by the certificate for the ordinary shares to which it relates and such other evidence as the directors may reasonably require to show the right of the transferor to make the transfer;

(b) the instrument of transfer is in respect of only one class of share;

(c) a fee, if any, of such maximum sum as the Designated Stock Exchange may determine to be payable or such lesser sum as the directors may from time to time require is paid to us in respect thereof; and

(d) if applicable, the instrument of transfer is duly and properly stamped.

The registration of transfers may, after compliance with any notice requirements of the Designated Stock Exchange, be suspended and the register closed at such times and for such periods as the directors may from time to time determine, provided, however, that the registration of transfers shall not be suspended nor the register closed for more than 30 days in any year.

Share Repurchase

We are empowered by the Companies Law and our third amended and restated articles of association to purchase our own shares. Our directors may only exercise this power on our behalf, subject to the Companies Law, our third amended and restated memorandum and articles of association and to any applicable requirements imposed from time to time by the SEC, the NYSE or by any other recognized stock exchange on which our securities are listed.

Dividends

Subject to the Companies Law and our third amended and restated articles of association, we in general meeting or our board of directors may from time to time declare dividends in any currency, but no dividends shall exceed the amount recommended by our board of directors. Dividend may be declared and paid out of our profits, realized or unrealized, or from any reserve set aside from profits which our directors determine is no longer needed. Dividends may also be declared and paid out of share premium account or any other fund or account which can be authorized for this purpose in accordance with the Companies Law.

Unless and to the extent that the rights attached to any shares or the terms of issue thereof otherwise provide, with respect to any shares not fully paid throughout the period in respect of which the dividend is paid, all dividends shall be apportioned and paid pro rata according to the amounts paid up on the shares during any portion or portions of the period in respect of which the dividend is paid. For these purposes no amount paid up on a share in advance of calls shall be treated as paid up on the share.

 

179


Table of Contents

Our board of directors may from time to time pay to our shareholders such interim dividends as appear to our directors to be justified by our profits. Our directors may also pay dividends semi-annually or at other intervals to be selected by them at a fixed rate if they are of the opinion that the profits available for distribution justify the payment.

Our board of directors may retain any dividends or other monies payable on or in respect of a share upon which we have a lien, and may apply the same in or towards satisfaction of the debts, liabilities or engagements in respect of which the lien exists. Our board of directors may also deduct from any dividend or other monies payable to any shareholder all sums of money, if any, presently payable by him or her to us on account of calls or otherwise.

No dividend shall carry interest against us.

Whenever our board of directors or we in general meeting have resolved that a dividend be paid or declared on our share capital, the board of directors may further resolve: (a) that such dividend be satisfied wholly or in part in the form of an allotment of shares credited as fully paid up on provided that those of our shareholders entitled thereto will be entitled to elect to receive such dividend, or part thereof, in cash in lieu of such allotment; or (b) that those of our shareholders entitled to such dividend will be entitled to elect to receive an allotment of shares credited as fully paid up in lieu of the whole or such part of the dividend as our board of directors may think fit. We may upon the recommendation of our board of directors by ordinary resolution resolve in respect of any one particular dividend that notwithstanding the foregoing a dividend may be satisfied wholly in the form of an allotment of shares credited as fully paid without offering any right to our shareholders to elect to receive such dividend in cash in lieu of such allotment.

Any dividend, interest or other sum payable in cash to a holder of shares may be paid by cheque or warrant sent through the post addressed to the registered address of our shareholder entitled, or in the case of joint holders, to the registered address of the person whose name stands first in our register of shareholders in respect of the joint holding to such person and to such address as the holder or joint holders may in writing direct. Every cheque or warrant so sent shall be made payable to the order of the holder or, in the case of joint holders, to the order of the holder whose name stands first on our register of shareholders in respect of such shares, and shall be sent at his or their risk and the payment of any such cheque or warrant by the bank on which it is drawn shall operate as a good discharge to us in respect of the dividend and/or bonus represented thereby, notwithstanding that it may subsequently appear that the same has been stolen or that any endorsement there on has been forged.

Any dividend unclaimed for six years from the date of declaration of such dividend may be forfeited and shall revert to us.

Our board of directors may, or we in general meeting direct that any dividend be satisfied wholly or in part by the distribution of specific assets of any kind, and in particular of paid up shares, debentures or warrants to subscribe securities of us or any other company, and where any difficulty arises in regard to such distribution our directors may settle it as they think expedient, and in particular may issue certificates in respect of fractions of shares, disregard fractional entitlements or round the same up or down, and may fix the value for distribution of such specific assets and may determine that cash payments shall be made to any of our shareholders upon the footing of the value so fixed in order to adjust the rights of all parties, and may vest any such specific assets in trustees as may seem expedient to our board of directors.

Untraceable Shareholders

We are entitled to sell any share of a shareholder who is untraceable, provided that:

(i) all cheques or warrants in respect of dividends of such shares, not being less than three in number, for any sums payable in cash to the holder of such shares have remained uncashed for a period of 12 years

 

180


Table of Contents

prior to the publication of the advertisement and the expiry of three months (or such shorter period as may be permitted by the Designated Stock Exchange) since the date of the advertisement;

(ii) we have not during that time received any indication of the existence of the shareholder or person entitled to such shares by death, bankruptcy or operation of law; and

(iii) we have caused an advertisement to be published in newspapers in the manner stipulated by our third amended and restated articles of association, giving notice of our intention to sell these shares, and a period of three months or such shorter period as may be allowed by the Designated Stock Exchange has elapsed since such advertisement.

The net proceeds of any such sale shall belong to us and when we receive these net proceeds we shall become indebted to the former shareholder for an amount equal to such net proceeds.

Inspection of Books and Records

Holders of our shares will have no general right under Cayman Islands law to inspect or obtain copies of our list of shareholders or our corporate records. However, we will provide our shareholders with annual audited financial statements. See “Where You Can Find Additional Information.”

Board of Directors

General

We are managed by a board of directors which currently consists of seven members. Our third amended and restated articles of association provide that the board of directors shall consist of not less than two and not more than seven directors.

Our shareholders may by ordinary resolution at any time remove any director before the expiration of his period of office notwithstanding anything in our third amended and restated articles of association or in any agreement between us and such director, and may by ordinary resolution elect another person in his stead. Subject to our third amended and restated articles of association, the directors will have power at any time and from time to time to appoint any person to be a director, either to fill a casual vacancy or a vacancy created by the removal of a director, but so that the total number of directors (exclusive of alternate directors) must not at any time exceed the maximum number fixed in our third amended and restated articles of association. We and our existing shareholders have agreed to take all steps necessary to maintain three directors appointed by Xiande Li, Kangping Chen and Xianhua Li, one director appointed by Flagship and one director appointed by the holders of our series B redeemable convertible shares on our board of directors until expiry of the lock-up period provided in the underwriting agreement.

There are no share ownership qualifications for directors.

Meetings of our board of directors may be convened by the secretary on the request of a director or by any director.

A meeting of our board of directors will be competent to make lawful and binding decisions if at least two directors are present or represented. At any meeting of our directors, each director, be it by his or her presence or by his or her alternate, is entitled to one vote. A director may vote in respect of any contract or transaction in which he is directly or indirectly interested, provided, such director must declare the nature of his interest at the earliest meeting of the board at which it is practicable for him to do so, either specifically or by way of a general notice stating that, by reason of the facts specified in the notice, he is to be regarded as interested in any contracts of a specified description which we may subsequently make.

 

181


Table of Contents

Questions arising at a meeting of our board of directors are required to be decided by simple majority votes of the members of our board of directors present or represented at the meeting. In the case of a tie vote, the chairman of the meeting shall have a second or deciding vote. Our board of directors may also pass resolutions without a meeting by written consent.

The remuneration to be paid to the directors shall be such remuneration as our board of directors may from time to time determine. Under our third amended and restated articles of association, the directors shall also be entitled to be paid their traveling, hotel and other expenses reasonably incurred by them in, attending meetings of the directors, or any committee of the directors, or general meetings of our company, or otherwise in connection with the discharge of his duties as director.

Differences in Corporate Law

The Companies Law is modeled after similar law in England but does not necessarily always follow recent changes in English law. In addition, the Companies Law differs from laws applicable to United States corporations and their shareholders. Set forth below is a summary of the significant differences between the provisions of the Companies Law applicable to us and the laws applicable to companies incorporated in the United States and their shareholders.

We are an exempted company with limited liability under the Companies Law. The Companies Law in the Cayman Islands distinguishes between ordinary resident companies and exempted companies. Any company that is registered in the Cayman Islands but conducts business mainly outside of the Cayman Islands may apply to be registered as an exempted company. The responsibilities for an exempted company are essentially the same as for an ordinary company except for the exemptions and privileges listed below:

 

   

an exempted company does not have to file an annual return of its shareholders with the Registrar of Companies;

 

   

an exempted company’s register of members is not open to inspection;

 

   

an exempted company does not have to hold an annual general meeting;

 

   

an exempted company may issue no par value, negotiable or bearer shares;

 

   

an exempted company may obtain an undertaking against the imposition of any future taxation (such undertakings are usually given for 20 years in the first instance);

 

   

an exempted company may register by way of continuation in another jurisdiction and be deregistered in the Cayman Islands;

 

   

an exempted company may register as a limited duration company; and

 

   

an exempted company may register as a segregated portfolio company.

“Limited liability” means that the liability of each shareholder is limited to the amount unpaid by the shareholder on our shares.

Duties of Directors

Under Cayman Islands law, at common law, members of a board of directors owe a fiduciary duty to the company to act in good faith in their dealings with or on behalf of the company and exercise their powers and fulfill the duties of their office honestly. This duty has four essential elements:

 

   

a duty to act in good faith in the best interests of the company;

 

   

a duty not to personally profit from opportunities that arise from the office of director;

 

182


Table of Contents
   

a duty to avoid conflicts of interest; and

 

   

a duty to exercise powers for the purpose for which such powers were intended.

In general, the Companies Law imposes various duties on officers of a company with respect to certain matters of management and administration of the company. The Companies Law contains provisions, which impose default fines on persons who fail to satisfy those requirements. However, in many circumstances, an individual is only liable if he knowingly is guilty of the default or knowingly and willfully authorizes or permits the default.

Interested Directors

There are no provisions under Cayman Islands law that require a director who is interested in a transaction entered into by a Cayman company to disclose his interest nor will render such director liable to such company for any profit realized pursuant to such transaction.

Voting Rights and Quorum Requirements

Under Cayman Islands law, the voting rights of shareholders are regulated by the company’s articles of association and, in certain circumstances, the Companies Law. The articles of association will govern matters such as quorum for the transaction of business, rights of shares, and majority votes required to approve any action or resolution at a meeting of the shareholders or board of directors. Under Cayman Islands law, certain matters must be approved by a special resolution which is defined as two-thirds of the votes cast by shareholders present at a meeting and entitled to vote; otherwise, unless the articles of association otherwise provide, the majority is usually a simple majority of votes cast.

Mergers and Similar Arrangements

(i) Schemes of Arrangement

The Companies Law contains statutory provisions that facilitate the reconstruction and amalgamation of companies provided that the scheme of arrangement is approved by:

 

   

a majority in number of each class of shareholders and creditors with whom the arrangement is to be made, and

 

   

who must in addition, represent at least three-fourths in value of each such class of shareholders and creditors, as the case may be,

that are present and voting either in person or by proxy at a meeting, or meetings, convened for that purpose. The convening of the meetings and the subsequent arrangement must be sanctioned by the Grand Court of the Cayman Islands. While a dissenting shareholder has the right to express to the court its view that the transaction ought not to be approved, the court can be expected to approve the arrangement if it determines that:

 

   

the company is not proposing to act illegally or beyond the scope of its authority;

 

   

the statutory provisions as to majority vote have been complied with;

 

   

the shareholders have been fairly represented at the meeting in question;

 

   

the arrangement is such that a businessman would reasonably approve; and

 

   

the arrangement is not one that would more properly be sanctioned under some other provision of the Cayman Companies Law or that would amount to a “fraud on the minority” under Cayman Islands law.

When a take-over offer is made and accepted by holders of 90% of the shares within four months, the offerer may, within a two-month period, require the holders of the remaining shares to transfer such shares on the

 

183


Table of Contents

terms of the offer. An objection can be made to the Grand Court of the Cayman Islands, but this is unlikely to succeed unless there is evidence of fraud, bad faith or collusion.

If the arrangement and reconstruction is so approved, the dissenting shareholder would have no rights comparable to appraisal rights, which would otherwise ordinarily be available to dissenting shareholders of corporations incorporated under jurisdictions of the United States, providing rights to receive payment in cash for the judicially determined value of the shares.

(ii) Mergers and Consolidations

Previously, Cayman Islands law did not provide for mergers as that expression is understood under United States corporate law. However, pursuant to the Companies (Amendment) Law, 2009 that came into force on May 11, 2009, in addition to the existing schemes of arrangements described above, it introduced a new mechanism for mergers and consolidations between Cayman Islands companies and between Cayman companies and foreign companies.

The procedure to effect a merger or consolidation is as follows:

 

   

the directors of each constituent company must approve a written plan of merger or consolidation, or the Plan;

 

   

the Plan must be authorized by each constituent company by (a) a shareholder resolution by majority in number representing 75% in value of the shareholders voting together as one class; and (b) if the shares to be issued to each shareholder in the consolidated or surviving company are to have the same rights and economic value as the shares held in the constituent company, a special resolution of the shareholders voting together as one class. A proposed merger between a Cayman parent company and its Cayman subsidiary or subsidiaries will not require authorization by shareholder resolution;

 

   

the consent of each holder of a fixed or floating security interest of a constituent company in a proposed merger or consolidation is required unless the court (upon the application of the constituent company that has issued the security) waives the requirement for consent;

 

   

the Plan must be signed by a director on behalf of each constituent company and filed with the registrar of companies together with the required supporting documents;

 

   

a certificate of merger or consolidation is issued by the registrar of companies which is prima facie evidence of compliance with all statutory requirements in respect of the merger or consolidation. All rights and property of each of the constituent companies will then vest in the surviving or consolidated company which will also be liable for all debts, contracts, obligations and liabilities of each constituent company. Similarly, any existing claims, proceedings or rulings of each constituent company will automatically be continued against the surviving or consolidated company; and

 

   

provision is made for a dissenting shareholder of a Cayman constituent company to be entitled to payment of the fair value of his shares upon dissenting to the merger or consolidation. Where the parties cannot agree on the price to be paid to the dissenting shareholder, either party may file a petition to the court to determine fair value of the shares. These rights are not available where an open market exists on a recognized stock exchange for the shares of the class held by the dissenting shareholder.

Shareholders’ Suits

We are not aware of any reported class action or derivative action having been brought in a Cayman Islands court. In principle, we will normally be the proper plaintiff and a derivative action may not be brought by a minority shareholder. However, based on English authorities, which would likely be of persuasive authority in the Cayman Islands, there are exceptions to the foregoing principle, including when:

 

   

a company acts or proposes to act illegally or beyond its power;

 

184


Table of Contents
   

the act complained of, although not beyond the power of the company, could be effected duly if authorized by more than a simple majority vote that has not been obtained; and

 

   

those who control the company are perpetrating a “fraud on the minority.”

Corporate Governance

Cayman Islands laws do not restrict transactions with directors, requiring only that directors exercise a duty of care and owe a fiduciary duty to the companies for which they serve. Under our memorandum and articles of association, subject to any separate requirement for audit committee approval under the applicable rules of the NYSE or unless disqualified by the chairman of the relevant board meeting, so long as a director discloses the nature of his interest in any contract or arrangement in which he is interested, such a director may vote in respect of any contract or proposed contract or arrangement in which such director is interested and may be counted in the quorum at such meeting.

Indemnification of Directors and Executive Officers and Limitation of Liability

Cayman Islands law does not limit the extent to which a company’s articles of association may provide for indemnification of officers and directors, except to the extent any such provision may be held by the Cayman Islands courts to be contrary to public policy, such as to provide indemnification against civil fraud or the consequences of committing a crime. Our memorandum and articles of association, which will become effective upon the completion of this offering, permit indemnification of officers, directors and auditors for losses, damages, costs and expenses incurred in their capacities as such unless such losses or damages arise from dishonesty, fraud or default of such directors or officers or auditors.

Insofar as indemnification for liabilities arising under the Securities Act may be permitted to our directors, officers or persons controlling us under the foregoing provisions, we have been informed that in the opinion of the SEC such indemnification is against public policy as expressed in the Securities Act and is therefore unenforceable as a matter of United States law.

Anti-takeover Provisions in the Third Amended and Restated Memorandum and Articles of Association

Cayman Islands law does not prevent companies from adopting a wide range of defensive measures, such as staggered boards, blank check preferred shares, removal of directors only for cause and provisions that restrict the rights of shareholders to call meetings, act by written consent and submit shareholder proposals. We plan to adopt the third amended and restated memorandum and articles of association to become effective upon the completion of this offering, which provides for, among others, a staggered board, blank check preferred stock and provisions that restrict the rights of shareholders to call shareholders’ meetings and eliminate their right to act by written consent.

Directors’ Fiduciary Duties

Under Delaware corporate law, a director of a Delaware corporation has a fiduciary duty to the corporation and its shareholders. This duty has two components: the duty of care and the duty of loyalty. The duty of care requires that a director act in good faith, with the care that an ordinarily prudent person would exercise under similar circumstances. Under this duty, a director must inform himself of, and disclose to shareholders, all material information reasonably available regarding a significant transaction. The duty of loyalty requires that a director act in a manner he reasonably believes to be in the best interests of the corporation. He must not use his corporate position for personal gain or advantage. This duty prohibits self-dealing by a director and mandates that the best interest of the corporation and its shareholders take precedence over any interest possessed by a director, officer or controlling shareholder and not shared by the shareholders generally. In general, actions of a director are presumed to have been made on an informed basis, in good faith and in the honest belief that the

 

185


Table of Contents

action taken was in the best interests of the corporation. However, this presumption may be rebutted by evidence of a breach of one of the fiduciary duties. Should such evidence be presented concerning a transaction by a director, a director must prove the procedural fairness of the transaction, and that the transaction was of fair value to the corporation.

Under Cayman Islands law, at common law, members of a board of directors owe a fiduciary duty to the company to act in good faith in their dealings with or on behalf of the company and exercise their powers and fulfill the duties of their office honestly. This duty has four essential elements:

 

   

a duty to act in good faith in the best interests of the company;

 

   

a duty not to personally profit from opportunities that arise from the office of director;

 

   

a duty to avoid conflicts of interest; and

 

   

a duty to exercise powers for the purpose for which such powers were intended.

In general, the Companies Law imposes various duties on officers of a company with respect to certain matters of management and administration of the company. The Companies Law contains provisions, which impose default fines on persons who fail to satisfy those requirements. However, in many circumstances, an individual is only liable if he knowingly is guilty of the default or knowingly and willfully authorizes or permits the default.

Shareholder Action by Written Consent

Under the Delaware General Corporation Law, a corporation may eliminate the right of shareholders to act by written consent by amendment to its certificate of incorporation. The articles of association of our company contain provisions that eliminate the right of shareholders to act by written consent.

Shareholder Proposals

Under the Delaware General Corporation Law, a shareholder has the right to put any proposal before the annual meeting of shareholders, provided it complies with the notice provisions in the governing documents. A special meeting may be called by the board of directors or any other person authorized to do so in the governing documents, but shareholders may be precluded from calling special meetings.

The Companies Law does not provide shareholders any right to bring business before a meeting or requisition a general meeting. However, these rights may be provided in articles of association. Our third amended and restated articles of association only allow a majority of our board of directors or the chairman of our board of directors to call an extraordinary shareholder’s meeting. As an exempted Cayman Islands company, we are not obliged by law to call shareholders’ annual general meetings. However, our third amended and restated articles of association require us to call such meetings.

Cumulative Voting

Under the Delaware General Corporation Law, cumulative voting for election of directors are not permitted unless the corporation’s certificate of incorporation specifically provides for it. Cumulative voting potentially facilitates the representation of minority shareholders on a board of directors since it permits the minority shareholder to cast all the votes to which the shareholder is entitled on a single director, which increases the shareholder’s voting power with respect to electing such director. While there is nothing under Cayman Islands law which specifically prohibits or restricts the creation of cumulative voting rights for the election of directors of a Company, our third amended and restated articles of association do not provide for cumulative voting. As a result, our shareholders are not afforded any less protections or rights on this issue than shareholders of a Delaware corporation.

 

186


Table of Contents

Removal of Directors

Under the Delaware General Corporation Law, a director of a corporation with a classified board may be removed only for cause with the approval of a majority of the outstanding shares entitled to vote, unless the certificate of incorporation provides otherwise. Under our third amended and restated articles of association, directors may be removed, by way of ordinary resolution of the shareholders.

Transactions with Interested Shareholders

The Delaware General Corporation Law contains a business combination statute applicable to Delaware public corporations whereby, unless the corporation has specifically elected not to be governed by such statute by amendment to its certificate of incorporation, it is prohibited from engaging in certain business combinations with an “interested shareholder” for three years following the date that such person becomes an interested shareholder. An interested shareholder generally is a person or group who or which owns or owned 15% or more of the target’s outstanding voting stock within the past three years. This has the effect of limiting the ability of a potential acquirer to make a two-tiered bid for the target in which all shareholders would not be treated equally. The statute does not apply if, among other things, prior to the date on which such shareholder becomes an interested shareholder, the board of directors approves either the business combination or the transaction which resulted in the person becoming an interested shareholder. This encourages any potential acquirer of a Delaware public corporation to negotiate the terms of any acquisition transaction with the target’s board of directors.

A Cayman company may enter into some business transactions with significant shareholders, including asset sales, in which a significant shareholder receives, or could receive, a financial benefit that is greater than that received, or to be received, by other shareholders with prior approval from the board of directors but without prior approval from the shareholders.

Sale of Assets

Contrary to the general practice in most corporations incorporated in the United States, Cayman Islands incorporated companies may not generally require that shareholders approve sales of all or substantially all of a company’s assets.

Dissolution; Winding up

Under the Delaware General Corporation Law, unless the board of directors approves the proposal to dissolve, dissolution must be approved by shareholders holding 100% of the total voting power of the corporation. Only if the dissolution is initiated by the board of directors may it be approved by a simple majority of the corporation’s outstanding shares. Delaware law allows a Delaware corporation to include in its certificate of incorporation a supermajority voting requirement in connection with dissolutions initiated by the board. Under the Companies Law of the Cayman Islands and our third amended and restated articles of association, our company may be dissolved, liquidated or wound up by the vote of holders of two-thirds of our shares voting at a meeting.

Variation of Rights of Shares

Under the Delaware General Corporation Law, a corporation may vary the rights of a class of shares with the approval of a majority of the outstanding shares of such class, unless the certificate of incorporation provides otherwise. As permitted by Cayman Islands law, our third amended and restated articles of association provides that, if our share capital is divided into more than one class of shares, we may vary the rights attached to any class only with the vote at a class meeting of holders of two-thirds of the shares of such class.

 

187


Table of Contents

Amendment of Governing Documents

Under the Delaware General Corporation Law, a corporation’s governing documents may be amended with the approval of a majority of the outstanding shares entitled to vote, unless the certificate of incorporation provides otherwise. As permitted by Cayman Islands law, our third amended and restated memorandum and articles of association may only be amended with the vote of holders of two-thirds of our shares voting at a meeting.

Rights of Non-resident or Foreign Shareholders

There are no limitations imposed by our third amended and restated memorandum and articles of association on the rights of non-resident or foreign shareholders to hold or exercise voting rights on our shares. In addition, there are no provisions in our third amended and restated memorandum and articles of association governing the ownership threshold above which shareholder ownership must be disclosed.

History of Share Issuances and Other Financings

The following is a summary of our securities issuances during the past three years.

In December 2007, we issued 50,000 ordinary shares at par value US$1.00 per share to Wholly Globe, which constituted all our then outstanding share capital. Brilliant, a company incorporated in the British Virgin Islands and wholly owned by Xiande Li, held 50% equity interest in Wholly Globe; Yale Pride Limited, or Yale Pride, a company incorporated in the British Virgin Islands and wholly owned by Kangping Chen, held 30% equity interest in Wholly Globe; and Peaky Investments Limited, or Peaky, a company incorporated in the British Virgin Islands and wholly owned by Xianhua Li, held 20% equity interest in Wholly Globe.

On October 17, 2008, Wholly Globe distributed 25,000, 15,000 and 10,000 of ordinary shares to Brilliant, Yale Pride and Peaky, respectively. We subsequently repurchased 24,999, 14,999 and 9,999 ordinary shares from Brilliant, Yale Pride and Peaky and reduced our authorized capital from US$50,000 to US$10,000. After the repurchase, we subdivided and reclassified our share capital into 10,000,000 shares, consisting of 9,743,688 ordinary shares, 107,503 series A redeemable convertible preferred shares and 148,829 series B redeemable convertible preferred shares, each at par value of US$0.001 per share. As a result of such subdivision, each ordinary share held by Brilliant, Yale Pride and Peaky was subdivided into 1,000 ordinary shares at par value of US$0.001 per share. References to numbers of shares, price per share, earnings per share and par value per share in this paragraph have not been adjusted to give effect to the 2009 Share Split.

Share Exchange

On December 16, 2008, we undertook a share exchange pursuant to which all the then existing shareholders of Paker exchanged their respective shares in Paker for our newly issued shares of the same class and Paker became our wholly-owned subsidiary. Consequently, shareholders of Paker immediately before the share exchange became our shareholders, holding the same number of shares and of the same classes in us (without giving effect to the 2009 Share Split) as in Paker immediately before the share exchange.

Ordinary Shares

On December 16, 2008, pursuant to the share exchange, we issued a total of 1,011,629 ordinary shares, par value US$0.001 per share (without giving effect to the 2009 Share Split) to Xiande Li, Kangping Chen and Xianhua Li and Wealth Plan, including:

(i) 499,000 ordinary shares for 200,000 ordinary shares in Paker held by Xiande Li, par value HK$0.001 per share, which were subdivided from 200 ordinary shares in Paker at original par value of

 

188


Table of Contents

HK$1.00 per share on May 30, 2008 and 300,000 ordinary shares in Paker, par value HK$0.001 per share, issued on May 30, 2008 in the form of stock dividend by Paker to Xiande Li;

(ii) 299,000 ordinary shares for 120,000 ordinary shares in Paker held by Kangping Chen, par value HK$0.001 per share, which were subdivided from 120 ordinary shares in Paker at original par value of HK$1.00 per share on May 30, 2008 and 180,000 ordinary shares in Paker, par value HK$0.001 per share, issued on May 30, 2008 in the form of stock dividend by Paker to Kangping Chen;

(iii) 199,000 ordinary shares for 80,000 ordinary shares in Paker held by Xianhua Li, par value HK$0.001 per share, which were subdivided from 80 ordinary shares in Paker at original par value of HK$1.00 per share on May 30, 2008 and 120,000 ordinary shares in Paker, par value HK$0.001 per share, issued on May 30, 2008 in the form of stock dividend by Paker to Xianhua Li; and

(iv) 14,629 ordinary shares for 14,629 ordinary shares in Paker, par value HK$0.001 per share, issued on May 30, 2008 in consideration for consultancy services by Paker to Wealth Plan.

Xiande Li, Kangping Chen and Xianhua Li subsequently contributed 499,000, 299,000 and 199,000 ordinary shares to Brilliant, Yale Pride and Peaky respectively.

Series A Redeemable Convertible Preferred Shares

On December 16, 2008, pursuant to the share exchange, we issued 67,263 and 40,240 series A redeemable convertible preferred shares (without giving effect to the 2009 Share Split) to Flagship and Everbest, respectively. The series A redeemable convertible preferred shares were issued in exchange for an equivalent number and class of shares issued by Paker on May 30, 2008 to Flagship and Everbest at US$223.005 and US$223.658 per share, respectively, for a total consideration of US$24.0 million in a private placement. The following is a summary of the material terms of the series A redeemable convertible preferred shares before the June 2009 Modification and September 2009 Modification discussed below:

 

   

The series A redeemable convertible preferred shares are convertible into ordinary shares at any time at the option of the holders of the series A redeemable convertible preferred shares. Automatic conversion will occur based upon the then effective conversion price immediately upon the completion of a Qualified IPO or at the election of the holders of at least 67% of the then outstanding series A and series B redeemable convertible preferred shares. The initial conversion price of the series A redeemable convertible preferred shares equaled the original issue price of such shares.

 

   

The terms of our series A redeemable convertible preferred shares include a provision that would have adjusted the applicable conversion price if our net income for 2008 had been less than RMB225 million or greater than RMB275 million. However, because our net income for 2008 fell within the specified range, no adjustment was made, and upon the completion of this offering which is expected to be a Qualified IPO, all outstanding series A redeemable convertible preferred shares will automatically be converted into ordinary shares at the ratio of one ordinary share to one series A redeemable convertible preferred share, subject to anti-dilution adjustments for any events occurring prior to the conversion into ordinary shares.

 

   

After May 30, 2011, any holder of the then outstanding series A redeemable convertible preferred shares may require us to redeem all of the outstanding series A redeemable convertible preferred shares held by such holder for an amount equal to 150% of their original issuance price, plus all accumulated and unpaid dividends. Dividends do not accumulate or accrue unless declared.

 

   

In the event of any liquidation event (as defined in our amended and restated articles of association) and so long as any of the series A redeemable convertible preferred shares have not been converted into ordinary shares, the holders of series A redeemable convertible preferred shares are entitled to receive, in preference to the holders of the ordinary shares, a per share amount equal to 150% of their original issue price and any declared but unpaid dividends. The holders of our series B redeemable convertible preferred shares enjoy the same liquidation rights, as set out below. After such payment has been made to

 

189


Table of Contents
 

holders of the series A and series B redeemable convertible preferred shares, any remaining assets will be distributed pro rata to the holders of ordinary shares and the series A and series B redeemable convertible preferred shares on an as-converted basis.

 

   

The series A redeemable convertible preferred shares rank pari passu with the series B redeemable convertible preferred shares in terms of rights to receive dividends and distributions, and are entitled to dividends, in preference to any dividend on the ordinary shares or any other class or series of shares, at the rate of 10% per annum of their original issue price, when and as declared by our board of directors. No dividend, whether in cash, in property, in our shares or otherwise, may be paid on any other class or series of our shares unless and until the dividend aforesaid is first paid in full on the series A and series B redeemable convertible preferred shares. Except for the dividend rights set forth above, the series A and series B redeemable convertible preferred shares do not participate with the ordinary shares in any further dividend or distribution of earnings or profits. Dividends do not accumulate or accrue unless declared.

 

   

The holders of series A redeemable convertible preferred shares have voting rights equal to the number of ordinary shares then issuable upon their conversion into ordinary shares. Holders of series A redeemable convertible preferred shares are entitled to vote at any of our general meetings.

Series B Redeemable Convertible Preferred Shares

On December 16, 2008, pursuant to the share exchange, we issued a total of 148,829 series B redeemable convertible preferred shares (without giving effect to the 2009 Share Split) to SCGC, CIVC, Pitango, TDR and New Goldensea. The series B redeemable convertible preferred shares were issued in exchange for an equivalent number and class of shares issued by Paker on September 18, 2008 to SCGC, CIVC, Pitango, TDR and New Goldensea at US$236.513 per share for a total consideration of US$35.2 million in a private placement. The following is a summary of the material terms of the series B redeemable convertible preferred shares before the June 2009 Modification and September 2009 Modification discussed below:

 

   

The series B redeemable convertible preferred shares are convertible into ordinary shares at any time at the option of the holders of the series B redeemable convertible preferred shares. Automatic conversion will occur based upon the then effective conversion price immediately upon the completion of a Qualified IPO or at the election of the holders of at least 67% of the then outstanding series A and series B redeemable convertible preferred shares. The initial conversion price of the series B redeemable convertible preferred shares equaled the original issue price of such shares.

 

   

The terms of our series B redeemable convertible preferred shares include a provision that resulted in an adjustment to the applicable conversion price. This provision provided that if our net income for 2008 was less than RMB250 million then the conversion price would be adjusted to increase the number of ordinary shares issuable upon conversion, while if our net income for 2008 was greater than RMB250 million then the conversion price would be adjusted to decrease the number of ordinary shares issuable upon conversion, in each case according to the formula described below. Because our net income for 2008, at RMB249.1 million, fell slightly below the target of RMB250 million, an adjustment was made, such that upon the completion of this offering which is expected to be a Qualified IPO, all outstanding series B redeemable convertible preferred shares will automatically be converted into ordinary shares at the ratio of approximately 1.0054 ordinary shares to one series B redeemable convertible preferred share, subject to anti-dilution adjustments for any events occurring prior to the conversion into ordinary shares. The adjustment formula took into consideration such factors as the amount of the investment by the holders of our series B redeemable convertible preferred shares, the amount of the investment by the holders of our series A redeemable convertible preferred shares and our 2008 net income. The formula was designed to adjust the number of shares held by the holders of the series B redeemable convertible preferred shares so that the percentage of the shares held by the holders of the series B redeemable convertible preferred shares in our issued and outstanding share capital equals the ratio of (i) the amount of investment by them in us to (ii) the value of our company calculated based on our 2008 net income. Generally, the adjustment is of the effect that the larger the deficit between our actual 2008 net income

 

190


Table of Contents
 

(subject to certain adjustments) and the 2008 net income target, the larger the number of ordinary shares into which each series B redeemable convertible preferred share is convertible.

 

   

Prior to the September 2009 Modification, the share subscription agreement provided that if the value of each ordinary share issuable upon conversion of the series B redeemable convertible preferred shares in connection with a Qualified IPO was less than 1.5 times the adjusted original issue price per share of series B redeemable convertible preferred shares, then the founders would be required to transfer to the holders of series B redeemable convertible preferred shares a number of ordinary shares the value of which, at the Qualified IPO price per share, when added to the value of the ordinary shares issuable upon conversion of the series B redeemable convertible preferred shares in connection with the Qualified IPO, would equal the product of (i) the number of outstanding series B redeemable convertible preferred shares prior to the Qualified IPO, multiplied by (ii) 1.5 times the adjusted original issue price per share of the series B redeemable convertible preferred shares. For example, if the value of the ordinary shares issuable upon conversion of the series B redeemable convertible preferred shares in connection with a Qualified IPO was US$5.00 per share (which is less than 1.5 times the adjusted original issue price of series B redeemable convertible preferred shares of US$7.10 per share), our founders would have been required to transfer an aggregate of 62,508 ordinary shares to holders of series B redeemable convertible preferred shares.

 

   

After May 30, 2011, any holder of the then outstanding series B redeemable convertible preferred shares may require us to redeem all of the outstanding series B redeemable convertible preferred shares held by such holder for an amount equal to 150% of their original issuance price, plus all accumulated and unpaid dividends. Dividends do not accumulate or accrue unless declared.

 

   

As in the case of the series A redeemable convertible preferred shares, in the event of any liquidation event (as defined in our amended and restated articles of association) and so long as any of the series B redeemable convertible preferred shares have not been converted into ordinary shares, the holders of series B redeemable convertible preferred shares are entitled to receive, in preference to the holders of the ordinary shares, a per share amount equal to 150% of their original issue price and any declared but unpaid dividends. After such payment has been made to holders of the series A and series B redeemable convertible preferred shares, any remaining assets will be distributed pro rata to the holders of ordinary shares and the series A and series B redeemable convertible preferred shares on an as-converted basis.

 

   

The series B redeemable convertible preferred shares rank pari passu with the series A redeemable convertible preferred shares in terms of rights to receive dividends and distributions, and are entitled to dividends, in preference to any dividend on the ordinary shares or any other class or series of shares, at the rate of 10% per annum of their original issue price, when and as declared by our board of directors. No dividend, whether in cash, in property, in our shares or otherwise, may be paid on any other class or series of shares of us Company unless and until the dividend aforesaid is first paid in full on the series A and series B redeemable convertible preferred shares. Except for the dividend rights set forth above, the series A and series B redeemable convertible preferred shares do not participate with the ordinary shares in any further dividend or distribution of earnings or profits. Dividends do not accumulate or accrue unless declared.

 

   

The holders of series B redeemable convertible preferred shares have voting rights equal to the number of ordinary shares then issuable upon their conversion into ordinary shares. Holders of series B redeemable convertible preferred shares are entitled to vote at any of our general meetings.

 

   

In connection with the investment of the holders of series B redeemable convertible preferred shares, Xiande Li, Kangping Chen and Xianhua Li executed a commitment letter to the holders of our series B redeemable convertible preferred shares, pursuant to which the founders were required to transfer for no further consideration, according to a formula described below, to the holders of series B redeemable convertible preferred shares additional ordinary shares if our audited consolidated financial statements for the year ending December 31, 2009 were delivered before the completion of the Qualified IPO and our net income for the year ending December 31, 2009, after certain adjustments, was less than the target net

 

191


Table of Contents
 

income for 2009, which prior to the June 2009 Modification was set at RMB450 million. The share transfer formula takes into consideration such factors as the amount of the investment by the holders of our series B redeemable convertible preferred shares, the amount of the investment by the holders of our series A redeemable convertible preferred shares, our 2008 net income and our 2009 net income. The formula required the transfer of ordinary shares by our founders to the holders of the series B redeemable convertible preferred shares so that the percentage of the shares to be held by the holders of the series B redeemable convertible preferred shares in our issued and outstanding share capital would equal the ratio of (i) the amount of investment by them in us to (ii) the value of our company calculated based on the difference between the 2009 net income target and our actual 2009 net income (subject to certain adjustments). Generally, the larger the deficit between our actual 2009 net income (subject to certain adjustments) and the 2009 net income target, the larger the number of ordinary shares that must be transferred to the holders of the series B redeemable convertible preferred shares by the founders. For information on the accounting treatment for 2009 net income target, see “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Critical Accounting Policies — Redeemable Convertible Preferred Shares.”

“Certain adjustments” means in calculating the year 2009 net income and year 2010 net income, (i) any earnings obtained through or as the result of mergers or acquisitions or any extraordinary or non-recurring earnings will not be counted and (ii) the costs and expenses incurred by us in relation to any financing conducted by us, including the Qualified IPO, listing of our ordinary shares directly or indirectly on any stock exchange and the implementation of any share incentive plan will not be deducted from our income. Our year 2009 net income would be rounded to the nearest RMB100,000. In addition, in applying the formula adjusting the share percentages based on our 2009 net income, if our year 2009 net income exceeded the target net income for 2009, it would be deemed as such target net income. “Certain adjustments” has a similar meaning when used in relation to the calculation of 2008 net income.

June 2009 Modification

On June 22, 2009, in view of changed market circumstances and in order to incentivize our founders, who are also our key employees, our founders and holders of series B redeemable convertible preferred shares reached an agreement to amend the commitment letter to reduce the net income target for 2009 from RMB450 million to RMB100 million. In return, our founders agreed to (i) transfer 76,582 ordinary shares (without giving effect to the 2009 Share Split) to the holders of series B redeemable convertible preferred shares, and (ii) add a net income target for 2010 to the commitment letter, pursuant to which our founders agreed to transfer ordinary shares to the holders of series B redeemable convertible preferred shares according to a formula for no further consideration if completion of a Qualified IPO has not occurred prior to delivery of our financial statements for the year ended December 31, 2010 and our net income for the year ended December 31, 2010, after certain adjustments which are the same as those applicable to the calculation of the 2009 net income discussed above, is less than the target net income for 2010 of RMB200 million.

Pursuant to the Shareholders Agreement and our amended and restated articles of association, the transfer of ordinary shares from our founders to the holders of series B redeemable convertible preferred shares required the approval of our shareholders holding at least 60% of the series A and series B redeemable convertible preferred shares. Our founders approached Flagship to obtain its approval of the share transfer, and in exchange for Flagship’s approval agreed on July 22, 2009 to transfer 14,031 ordinary shares (without giving effect to the 2009 Share Split) to Flagship.

The share transfer from our founders to series B redeemable convertible preferred shares and Flagship pursuant to the June 2009 Modification was completed on September 15, 2009.

See “Risk Factor — Risks related to Our Business and Our Industry — Our founders may be obligated to transfer up to 41.3% of our issued and outstanding share capital to holders of our series B redeemable convertible

 

192


Table of Contents

preferred shares for no further consideration, which may result in our founders losing control of our company.” Our founders’ obligation under the commitment letter will end when we have completed a Qualified IPO.

Our year 2009 net income after certain adjustments exceeded the target net income for 2009 of RMB100 million. Therefore, our founders were not required to transfer any ordinary shares to the holders of our series B redeemable convertible preferred shares in respect of the 2009 net income target pursuant to the commitment letter as amended by the June 2009 Modification.

September 2009 Modification

The Shareholders Agreement originally specified that a Qualified IPO must, among other things, result in a total market capitalization of not less than US$750 million and raise total gross proceeds of not less than US$150 million. Our amended and restated articles of association contained the same provisions.

One of the consequences of the occurrence of a Qualified IPO is that the series A and series B redeemable convertible preferred shares are automatically converted into ordinary shares, and the restrictive provisions of the Shareholders Agreement are terminated. In view of changed market circumstances, in order to ensure that this offering is a Qualified IPO, our shareholders agreed to amend the definition of Qualified IPO to remove the thresholds of market capitalization and gross proceeds.

Accordingly, on September 15, 2009, our founders agreed with the holders of series A and series B redeemable convertible preferred shares to amend certain existing terms of the investment by the holders of series A and series B redeemable convertible preferred shares in us, including:

(i) revision of the definition of Qualified IPO to eliminate such quantitative thresholds, such that a Qualified IPO is now defined as a fully underwritten initial public offering of our shares or ADSs with a listing on the NYSE;

(ii) removal of the requirement for our founders to transfer certain number of ordinary shares to the holders of the series B redeemable convertible preferred shares if the value of ordinary shares issuable upon conversion of the series B redeemable convertible preferred shares in connection with a Qualified IPO is less than 1.5 times the adjusted original issue price per share of the series B redeemable convertible preferred shares; and

(iii) an agreement that the 14,031 and 76,528 ordinary shares (in both cases, without giving effect to the 2009 Share Split) transferred to Flagship and the holders of series B redeemable convertible preferred shares, respectively, in connection with the June 2009 Modification must be returned to the founders in the event they exercise their rights to cause the redemption of their preferred shares.

As a result, we expect this offering to constitute a Qualified IPO.

Registration Rights

We have granted registration rights to the holders of our series A and series B redeemable convertible preferred shares and ordinary shares issued to Wealth Plan or their assignees pursuant to the Shareholders’ Agreement dated December 16, 2008, which replaced the amended and restated shareholders agreement entered into by Paker with its shareholders on September 18, 2008.

Demand Registration Rights

At any time that is six months after the closing of this offering, any shareholder(s) holding of record at least 20% of registrable securities then outstanding may, on three occasions only, request us to effect the registration of all or part of the registrable securities then outstanding so long as on each occasion, the anticipated aggregate

 

193


Table of Contents

offering price (net of underwriting discounts and commissions) exceeds US$5 million. Registrable securities are ordinary shares issued or issuable to the holders of our preferred shares and ordinary shares issued to Wealth Plan or their respective transferees.

Form F-3 or Form S-3 Registration Rights

At any time that is six months after the closing of this offering, if our company qualifies for registration on Form F-3 or Form S-3, any holder of registrable securities may request us to effect a registration statement on Form F-3 or Form S-3 for a public offering of registrable securities so long as the reasonably anticipated aggregate price to the public would be at least US$1 million and we are entitled to use Form F-3 or Form S-3 for such offering. Holders of registrable securities may demand a registration on Form F-3 or Form S-3 on unlimited occasions, although we are only obligated to bear expenses incurred for the first two such Form F-3 or Form S-3 registrations.

Piggyback Registration Rights

Holders of registrable securities also have “piggyback” registration rights, which may request us to register all or any part of the registrable securities then held by such holders when we register any of our equity securities in connection with public offering of such securities solely for cash.

If any of the offerings involves an underwriting, the managing underwriter or the underwriters of any such offering have certain rights to limit the number of shares included in such registration. However, the number of registrable securities included in an underwritten public offering subsequent to this offering pursuant to demand registration rights, Form F-3 or Form S-3 registration rights or “piggyback” registration rights may not be reduced to less than 25% of the registrable securities requested to be included in such offering. However, the terms do not provide for any specific damage, payment or transfer any other consideration to the holders of registrable securities in the event of non-performance to effect a registration statement.

We are generally required to bear all of the registration expenses incurred in connection with three demand registrations, two Form F-3 or Form S-3 registrations and unlimited number of piggyback registrations, except underwriting discounts and commissions.

 

194


Table of Contents

DESCRIPTION OF AMERICAN DEPOSITARY SHARES

American Depositary Receipts

JPMorgan Chase Bank, N.A., as depositary, will issue the ADSs which you will be entitled to receive in this offering. Each ADS will represent an ownership interest in four ordinary shares which we will deposit with the custodian, as agent of the depositary, under the deposit agreement among ourselves, the depositary and you as an ADR holder. In the future, each ADS will also represent any securities, cash or other property deposited with the depositary but which it has not distributed directly to you. Unless specifically requested by you, all ADSs will be issued on the books of our depositary in book-entry form and periodic statements will be mailed to you which reflect your ownership interest in such ADSs. In our description, references to American depositary receipts or ADRs shall include the statements you will receive which reflects your ownership of ADSs.

The depositary’s office is located at 1 Chase Manhattan Plaza, Floor 58, New York, NY 10005-1401.

You may hold ADSs either directly or indirectly through your broker or other financial institution. If you hold ADSs directly, by having an ADS registered in your name on the books of the depositary, you are an ADR holder. This description assumes you hold your ADSs directly. If you hold the ADSs through your broker or financial institution nominee, you must rely on the procedures of such broker or financial institution to assert the rights of an ADR holder described in this section. You should consult with your broker or financial institution to find out what those procedures are.

As an ADR holder, we will not treat you as a shareholder of ours and you will not have any shareholder rights. Cayman Islands law governs shareholder rights. Because the depositary or its nominee will be the shareholder of record for the shares represented by all outstanding ADSs, shareholder rights rest with such record holder. Your rights are those of an ADR holder. Such rights derive from the terms of the deposit agreement to be entered into among us, the depositary and all registered holders from time to time of ADSs issued under the deposit agreement. The obligations of the depositary and its agents are also set out in the deposit agreement. Because the depositary or its nominee will actually be the registered owner of the shares, you must rely on it to exercise the rights of a shareholder on your behalf. The deposit agreement and the ADSs are governed by New York law.

The following is a summary of the material terms of the deposit agreement. Because it is a summary, it does not contain all the information that may be important to you. For more complete information, you should read the entire deposit agreement and the form of ADR which contains the terms of your ADSs. You can read a copy of the deposit agreement which is filed as an exhibit to the registration statement of which this prospectus forms a part. You may also obtain a copy of the deposit agreement at the SEC’s public reference room which is located at 100 F Street, NE, Washington, DC 20549. You may obtain information on the operation of the public reference room by calling the SEC at 1-800-732-0330. You may also find the registration statement and the attached deposit agreement on the SEC’s website at http://www.sec.gov.

Share Dividends and Other Distributions

How will you receive dividends and other distributions on the shares underlying your ADSs?

We may make various types of distributions with respect to our securities. The depositary has agreed that, to the extent practicable, it will pay to you the cash dividends or other distributions it or the custodian receives on shares or other deposited securities, after converting any cash received into U.S. dollars and, in all cases, making any necessary deductions provided for in the deposit agreement. You will receive these distributions in proportion to the number of underlying securities that your ADSs represent.

 

195


Table of Contents

Except as stated below, the depositary will deliver such distributions to ADR holders in proportion to their interests in the following manner:

 

   

Cash.  The depositary will distribute any U.S. dollars available to it resulting from a cash dividend or other cash distribution or the net proceeds of sales of any other distribution or portion thereof (to the extent applicable), on an averaged or other practicable basis, subject to (i) appropriate adjustments for taxes withheld, (ii) such distribution being impermissible or impracticable with respect to certain registered ADR holders, and (iii) deduction of the depositary’s expenses in (1) converting any foreign currency to U.S. dollars to the extent that it determines that such conversion may be made on a reasonable basis, (2) transferring foreign currency or U.S. dollars to the United States by such means as the depositary may determine to the extent that it determines that such transfer may be made on a reasonable basis, (3) obtaining any approval or license of any governmental authority required for such conversion or transfer, which is obtainable at a reasonable cost and within a reasonable time and (4) making any sale by public or private means in any commercially reasonable manner. If exchange rates fluctuate during a time when the depositary cannot convert a foreign currency, you may lose some or all of the value of the distribution.

 

   

Shares.  In the case of a distribution in shares, the depositary will issue additional ADRs to evidence the number of ADSs representing such shares. Only whole ADSs will be issued. Any shares which would result in fractional ADSs will be sold and the net proceeds will be distributed in the same manner as cash to the ADR holders entitled thereto.

 

   

Rights to receive additional shares.  In the case of a distribution of rights to subscribe for additional shares or other rights, if we provide evidence satisfactory to the depositary that it may lawfully distribute such rights, the depositary will distribute warrants or other instruments representing such rights in its discretion. However, if we do not furnish such evidence, the depositary may (i) sell such rights if practicable and distribute the net proceeds in the same manner, as cash to the ADR holders entitled thereto; or (ii) if it is not practicable to sell such rights, do nothing and allow such rights to lapse, in which case ADR holders will receive nothing. We have no obligation to file a registration statement under the Securities Act in order to make any rights available to ADR holders.

 

   

Other Distributions.  In the case of a distribution of securities or property other than those described above, the depositary may either (i) distribute such securities or property in any manner it deems equitable and practicable or (ii) to the extent the depositary deems distribution of such securities or property not to be equitable and practicable, sell such securities or property and distribute any net proceeds in the same way it distributes cash.

If the depositary determines that any distribution described above is not practicable with respect to any specific registered ADR holder, the depositary may choose any method of distribution that it deems practicable for such ADR holder, including the distribution of foreign currency, securities or property, or it may retain such items, without paying interest on or investing them, on behalf of the ADR holder as deposited securities, in which case the ADSs will also represent the retained items.

Any U.S. dollars will be distributed by checks drawn on a bank in the United States for whole dollars and cents. Fractional cents will be withheld without liability and dealt with by the depositary in accordance with its then current practices.

The depositary is not responsible if it decides that it is unlawful or impractical to make a distribution available to any ADR holders.

There can be no assurance that the depositary will be able to convert any currency at a specified exchange rate or sell any property, rights, shares or other securities at a specified price, nor that any of such transactions can be completed within a specified time period.

 

196


Table of Contents

Deposit, Withdrawal and Cancellation

How does the depositary issue ADSs?

The depositary will issue ADSs if you or your broker deposit shares or evidence of rights to receive shares with the custodian and pay the fees and expenses owing to the depositary in connection with such issuance. In the case of the ADSs to be issued under this prospectus, we will arrange with the underwriters named herein to deposit such shares.

Shares deposited in the future with the custodian must be accompanied by certain delivery documentation, including instruments showing that such shares have been properly transferred or endorsed to the person on whose behalf the deposit is being made.

The custodian will hold all deposited shares (including those being deposited by or on our behalf in connection with the offering to which this prospectus relates) for the account of the depositary. ADR holders thus have no direct ownership interest in the shares and only have such rights as are contained in the deposit agreement. The custodian will also hold any additional securities, property and cash received on or in substitution for the deposited shares. The deposited shares and any such additional items are referred to as “deposited securities”.

Upon each deposit of shares, receipt of related delivery documentation and compliance with the other provisions of the deposit agreement, including the payment of the fees and charges of the depositary and any taxes or other fees or charges owing, the depositary will issue an ADR or ADRs in the name or upon the order of the person entitled thereto evidencing the number of ADSs to which such person is entitled. All of the ADSs issued will, unless specifically requested to the contrary, be part of the depositary’s direct registration system, and a registered holder will receive periodic statements from the depositary which will show the number of ADSs registered in such holder’s name. An ADR holder can request that the ADSs not be held through the depositary’s direct registration system and that a certificated ADR be issued.

How do ADR holders cancel an ADS and obtain deposited securities?

When you turn in your ADR certificate at the depositary’s office, or when you provide proper instructions and documentation in the case of direct registration ADSs, the depositary will, upon payment of certain applicable fees, charges and taxes, deliver the underlying shares to you or upon your written order. In the case of certificated ADSs, delivery will be made at the custodian’s office. At your risk, expense and request, the depositary may deliver deposited securities at such other place as you may request.

The depositary may only restrict the withdrawal of deposited securities in connection with:

 

   

temporary delays caused by closing our transfer books or those of the depositary or the deposit of shares in connection with voting at a shareholders’ meeting, or the payment of dividends;

 

   

the payment of fees, taxes and similar charges; or

 

   

compliance with any U.S. or foreign laws or government regulations relating to the ADRs or to the withdrawal of deposited securities.

This right of withdrawal may not be limited by any other provision of the deposit agreement.

Record Dates

The depositary may, after consultation with us if practicable, fix record dates for the determination of the registered ADR holders who will be entitled (or obligated, as the case may be):

 

   

to receive any distribution on or in respect of shares,

 

   

to give instructions for the exercise of voting rights at a meeting of holders of ordinary shares or other deposited securities,

 

197


Table of Contents
   

to pay the fee assessed by the depositary for administration of the ADR program and for any expenses as provided for in the ADR, or

 

   

to receive any notice or to act in respect of other matters,

all subject to the provisions of the deposit agreement.

Voting Rights

How do you vote?

If you are an ADR holder and the depositary asks you to provide it with voting instructions, you may instruct the depositary how to exercise the voting rights for the shares which underlie your ADSs. As soon as practicable after receiving notice of any meeting or solicitation of consents or proxies from us, the depositary will distribute to the registered ADR holders a notice stating such information as is contained in the voting materials received by the depositary and describing how you may instruct the depositary to exercise the voting rights for the shares which underlie your ADSs, including instructions for giving a discretionary proxy to a person designated by us. For instructions to be valid, the depositary must receive them in the manner and on or before the date specified. The depositary will try, as far as is practical, subject to the provisions of and governing the underlying shares or other deposited securities, to vote or to have its agents vote the shares or other deposited securities as you instruct. The depositary will only vote or attempt to vote as you instruct. The depositary will not itself exercise any voting discretion. Furthermore, neither the depositary nor its agents are responsible for any failure to carry out any voting instructions, for the manner in which any vote is cast or for the effect of any vote.

There is no guarantee that you will receive voting materials in time to instruct the depositary to vote and it is possible that you, or persons who hold their ADSs through brokers, dealers or other third parties, will not have the opportunity to exercise a right to vote.

Reports and Other Communications

Will you be able to view our reports?

The depositary will make available for inspection by ADR holders at the offices of the depositary and the custodian the deposit agreement, the provisions of or governing deposited securities, and any written communications from us which are both received by the custodian or its nominee as a holder of deposited securities and made generally available to the holders of deposited securities.

Additionally, if we make any written communications generally available to holders of our shares, and we furnish copies thereof (or English translations or summaries), to the depositary. It will distribute the same to the registered ADR holders.

Fees and Expenses

What fees and expenses will you be responsible for paying?

The depositary may charge each person to whom ADSs are issued, including, without limitation, issuances against deposits of shares, issuances in respect of share distributions, rights and other distributions, issuances pursuant to a stock dividend or stock split declared by us or issuances pursuant to a merger, exchange of securities or any other transaction or event affecting the ADSs or deposited securities, and each person surrendering ADSs for withdrawal of deposited securities or whose ADRs are cancelled or reduced for any other reasons, US$5.00 for each 100 ADSs (or any portion thereof) issued, delivered, reduced, cancelled or surrendered, as the case may be. The depositary may sell (by public or private sale) sufficient securities and property received in respect of a share distribution, rights and/or other distribution prior to such deposit to pay such charge.

 

198


Table of Contents

The following additional charges shall be incurred by the ADR holders, by any party depositing or withdrawing shares or by any party surrendering ADSs or to whom ADSs are issued (including, without limitation, issuance pursuant to a stock dividend or stock split declared by us or an exchange of stock regarding the ADRs or the deposited securities or a distribution of ADSs), whichever is applicable:

 

   

a fee of US$1.50 per ADR or ADRs for transfers of certificated or direct registration ADRs;

 

   

a fee of up to US$0.05 per ADS for any cash distribution made pursuant to the deposit agreement;

 

   

a fee of up to US$0.05 per ADS per calendar year (or portion thereof) for services performed by the depositary in administering the ADRs (which fee may be charged on a periodic basis during each calendar year and shall be assessed against holders of ADRs as of the record date or record dates set by the depositary during each calendar year and shall be payable in the manner described in the next succeeding provision);

 

   

reimbursement of such fees, charges and expenses as are incurred by the depositary and/or any of the depositary’s agents (including, without limitation, the custodian and expenses incurred on behalf of holders in connection with compliance with foreign exchange control regulations or any law or regulation relating to foreign investment) in connection with the servicing of the shares or other deposited securities, the delivery of deposited securities or otherwise in connection with the depositary’s or its custodian’s compliance with applicable law, rule or regulation (which charge shall be assessed on a proportionate basis against ADS holders as of the record date or dates set by the depositary and shall be payable at the sole discretion of the depositary by billing such holders or by deducting such charge from one or more cash dividends or other cash distributions);

 

   

a fee for the distribution of securities (or the sale of securities in connection with a distribution), such fee being in an amount equal to the fee for the execution and delivery of ADSs which would have been charged as a result of the deposit of such securities (treating all such securities as if they were shares) but which securities or the net cash proceeds from the sale thereof are instead distributed by the depositary to those holders entitled thereto;

 

   

stock transfer or other taxes and other governmental charges;

 

   

cable, telex and facsimile transmission and delivery charges incurred at your request in connection with the deposit or delivery of shares;

 

   

transfer or registration fees for the registration of transfer of deposited securities on any applicable register in connection with the deposit or withdrawal of deposited securities; and

 

   

expenses of the depositary in connection with the conversion of foreign currency into U.S. dollars.

We will pay all other charges and expenses of the depositary and any agent of the depositary (except the custodian) pursuant to agreements from time to time between us and the depositary. The charges described above may be amended from time to time by agreement between the depositary and us.

Our depositary has agreed to reimburse us for certain expenses we incur that are related to establishment and maintenance of the ADR program, including investor relations expenses and exchange application and listing fees. Neither the depositary nor we can determine the exact amount to be made available to us because (i) the number of ADSs that will be issued and outstanding, (ii) the level of fees to be charged to holders of ADSs and (iii) our reimbursable expenses related to the ADR program are not known at this time. The depositary collects its fees for issuance and cancellation of ADSs directly from investors depositing shares or surrendering ADSs for the purpose of withdrawal or from intermediaries acting for them. The depositary collects fees for making distributions to investors by deducting those fees from the amounts distributed or by selling a portion of distributable property to pay the fees. The depositary may collect its annual fee for depositary services by deduction from cash distributions, or by directly billing investors, or by charging the book-entry system accounts of participants acting for them. The depositary may generally refuse to provide services to any holder until the fees and expenses owing by such holder for those services or otherwise are paid.

 

199


Table of Contents

Payment of Taxes

ADR holders must pay any tax or other governmental charge payable by the custodian or the depositary on any ADS or ADR, deposited security or distribution. If an ADR holder owes any tax or other governmental charge, the depositary may (i) deduct the amount thereof from any cash distributions, or (ii) sell deposited securities (by public or private sale) and deduct the amount owing from the net proceeds of such sale. In either case the ADR holder remains liable for any shortfall. Additionally, if any tax or governmental charge is unpaid, the depositary may also refuse to effect any registration, registration of transfer, split-up or combination of deposited securities or withdrawal of deposited securities until such payment is made. If any tax or governmental charge is required to be withheld on any cash distribution, the depositary may deduct the amount required to be withheld from any cash distribution, or in the case of a non-cash distribution, sell the distributed property or securities (by public or private sale) to pay such taxes and distribute any remaining net proceeds to the ADR holders entitled thereto.

By holding an ADR or an interest therein, you will be agreeing to indemnify us, the depositary, its custodian and any of our or their respective directors, employees, agents and affiliates against, and hold each of them harmless from, any claims by any governmental authority with respect to taxes, additions to tax, penalties or interest arising out of any refund of taxes, reduced rate of withholding at source or other tax benefit obtained.

Reclassifications, Recapitalizations and Mergers

If we take certain actions that affect the deposited securities, including (i) any change in par value, split-up, consolidation, cancellation or other reclassification of deposited securities or (ii) any distributions not made to holders of ADRs or (iii) any recapitalization, reorganization, merger, consolidation, liquidation, receivership, bankruptcy or sale of all or substantially all of our assets, then the depositary may choose to:

 

   

amend the form of ADR;

 

   

distribute additional or amended ADRs;

 

   

distribute cash, securities or other property it has received in connection with such actions;

 

   

sell any securities or property received and distribute the proceeds as cash; or

 

   

none of the above.

If the depositary does not choose any of the above options, any of the cash, securities or other property it receives will constitute part of the deposited securities and each ADS will then represent a proportionate interest in such property.

Amendment and Termination

How may the deposit agreement be amended?

We may agree with the depositary to amend the deposit agreement and the ADSs without your consent for any reason. ADR holders must be given at least 30 days notice of any amendment that imposes or increases any fees or charges (other than stock transfer or other taxes and other governmental charges, transfer or registration fees, cable, telex or facsimile transmission costs, delivery costs or other such expenses), or otherwise prejudices any substantial existing right of ADR holders. Such notice need not describe in detail the specific amendments effectuated thereby, but must give ADR holders a means to access the text of such amendment. If an ADR holder continues to hold an ADR or ADRs after being so notified, such ADR holder is deemed to agree to such amendment and to be bound by the deposit agreement as so amended. Notwithstanding the foregoing, if any governmental body or regulatory body should adopt new laws, rules or regulations which would require amendment or supplement of the deposit agreement or the form of ADR to ensure compliance therewith, we and the depositary may amend or supplement the deposit agreement and the ADR at any time in accordance with

 

200


Table of Contents

such changed laws, rules or regulations, which amendment or supplement may take effect before a notice is given or within any other period of time as required for compliance. No amendment, however, will impair your right to surrender your ADSs and receive the underlying securities, except in order to comply with mandatory provisions of applicable law.

How may the deposit agreement be terminated?

The depositary may, and shall at our written direction, terminate the deposit agreement and the ADRs by mailing notice of such termination to the registered holders of ADRs at least 30 days prior to the date fixed in such notice for such termination; provided, however, if the depositary shall have (i) resigned as depositary under the deposit agreement, notice of such termination by the depositary shall not be provided to registered holders unless a successor depositary shall not be operating under the deposit agreement within 45 days of the date of such resignation, or (ii) been removed as depositary under the deposit agreement, notice of such termination by the depositary shall not be provided to registered holders of ADRs unless a successor depositary shall not be operating under the deposit agreement on the 90th day after our notice of removal was first provided to the depositary. After termination, the depositary’s only responsibility will be (i) to deliver deposited securities to ADR holders who surrender their ADRs, and (ii) to receive and hold or sell distributions on deposited securities. As soon as practicable after the expiration of six months from the termination date, the depositary will sell the deposited securities which remain and hold the net proceeds of such sales (as long as it may lawfully do so), without liability for interest, in trust for the ADR holders who have not yet surrendered their ADRs. After making such sale, the depositary shall have no obligations except to account for such net proceeds and other cash.

Limitations on Obligations and Liability to ADR Holders

Limits on our obligations and the obligations of the depositary; limits on liability to ADR holders and holders of ADSs

Prior to the issue, registration, registration of transfer, split-up or, combination of any ADR, the delivery of any distribution in respect thereof, the withdrawal of any deposited securities, and from time to time, we or the depositary or its custodian may require:

 

   

payment with respect thereto of (i) any stock transfer or other tax or other governmental charge, (ii) any stock transfer or registration fees in effect for the registration of transfers of shares or other deposited securities upon any applicable register and (iii) any applicable charges as described in the deposit agreement;

 

   

the production of proof satisfactory to it of (i) the identity of any signatory and genuineness of any signature and (ii) such other information, including without limitation, information as to citizenship, residence, exchange control approval, beneficial ownership of any securities, compliance with applicable laws, regulations, provisions of or governing deposited securities and terms of the deposit agreement and the ADRs, as it may deem necessary or proper; and

 

   

compliance with such regulations as the depositary may establish consistent with the deposit agreement.

The issuance of ADRs, the acceptance of deposits of shares, the registration, registration of transfer, split-up or combination of ADRs or the withdrawal of shares, may be suspended generally or in particular instances, when the ADR register or any register for deposited securities is closed or when any such action is deemed advisable by the depositary; provided that the ability to withdrawal shares may only be limited under the following circumstances: (i) temporary delays caused by closing transfer books of the depositary or our transfer books or the deposit of shares in connection with voting at a shareholders’ meeting, or the payment of dividends, (ii) the payment of fees, taxes, and similar charges, and (iii) compliance with any laws or governmental regulations relating to ADRs or to the withdrawal of deposited securities.

 

201


Table of Contents

The deposit agreement expressly limits the obligations and liability of the depositary, ourselves and our respective agents. Neither we nor the depositary nor any such agent will be liable if:

 

   

any present or future law, rule, regulation, fiat, order or decree of the United States, the Cayman Islands, the People’s Republic of China (including the Hong Kong Special Administrative Region, the People’s Republic of China) or any other country, or of any governmental or regulatory authority or securities exchange or market or automated quotation system, the provisions of or governing any deposited securities, any present or future provision of our charter, any act of God, war, terrorism or other circumstance beyond our, the depositary’s or our respective agents’ control shall prevent, delay or subject to any civil or criminal penalty any act which the deposit agreement or the ADRs provides shall be done or performed by us, the depositary or our respective agents (including, without limitation, voting);

 

   

it exercises or fails to exercise discretion under the deposit agreement or the ADR;

 

   

it performs its obligations under the deposit agreement and ADRs without gross negligence or bad faith;

 

   

it takes any action or refrains from taking any action in reliance upon the advice of or information from legal counsel, accountants, any person presenting shares for deposit, any registered holder of ADRs, or any other person believed by it to be competent to give such advice or information; or

 

   

it relies upon any written notice, request, direction or other document believed by it to be genuine and to have been signed or presented by the proper party or parties.

Neither the depositary nor its agents have any obligation to appear in, prosecute or defend any action, suit or other proceeding in respect of any deposited securities or the ADRs. We and our agents shall only be obligated to appear in, prosecute or defend any action, suit or other proceeding in respect of any deposited securities or the ADRs, which in our opinion may involve us in expense or liability, if indemnity satisfactory to us against all expense (including fees and disbursements of counsel) and liability is furnished as often as may be required. The depositary and its agents may fully respond to any and all demands or requests for information maintained by or on its behalf in connection with the deposit agreement, any registered holder or holders of ADRs, any ADR or ADRs or otherwise related to the deposit agreement or ADRs to the extent such information is requested or required by or pursuant to any lawful authority, including without limitation laws, rules, regulations, administrative or judicial process, banking, securities or other regulators. The depositary shall not be liable for the acts or omissions made by any securities depositary, clearing agency or settlement system in connection with or arising out of book-entry settlement of deposited securities or otherwise. Furthermore, the depositary shall not be responsible for, and shall incur no liability in connection with or arising from, the insolvency of any custodian that is not a branch or affiliate of JPMorgan Chase Bank, N.A.

Additionally, none of us, the depositary or the custodian shall be liable for the failure by any registered holder of ADRs or beneficial owner therein to obtain the benefits of credits on the basis of non-U.S. tax paid against such holder’s or beneficial owner’s income tax liability. Neither we nor the depositary shall incur any liability for any tax consequences that may be incurred by holders or beneficial owners on account of their ownership of ADRs or ADSs.

Neither the depositary nor its agents will be responsible for any failure to carry out any instructions to vote any of the deposited securities, for the manner in which any such vote is cast or for the effect of any such vote. Neither the depositary nor any of its agents shall be liable to the registered holders of ADRs or beneficial owners of interests in ADSs for any indirect, special, punitive or consequential damages (including, without limitation, lost profits) of any form incurred by any person or entity, whether or not foreseeable and regardless of the type of action in which such a claim may be brought.

The depositary and its agents may own and deal in any class of our securities and in ADSs.

 

202


Table of Contents

Disclosure of Interest in ADSs

To the extent that the provisions of or governing any deposited securities may require disclosure of or impose limits on beneficial or other ownership of deposited securities, other shares and other securities and may provide for blocking transfer, voting or other rights to enforce such disclosure or limits, you agree to comply with all such disclosure requirements and ownership limitations and to comply with any reasonable instructions we may provide in respect thereof. We reserve the right to instruct you to deliver your ADSs for cancellation and withdrawal of the deposited securities so as to permit us to deal with you directly as a holder of shares and you agree to comply with such instructions.

Books of Depositary

The depositary or its agent will maintain a register for the registration, registration of transfer, combination and split-up of ADRs, which register shall include the depositary’s direct registration system. Registered holders of ADRs may inspect such records at the depositary’s office at all reasonable times, but solely for the purpose of communicating with other holders in the interest of the business of our company or a matter relating to the deposit agreement. Such register may be closed from time to time, when deemed expedient by the depositary.

The depositary will maintain facilities for the delivery and receipt of ADRs.

Pre-release of ADSs

In its capacity as depositary, the depositary shall not lend shares or ADSs; provided, however, that the depositary may (i) issue ADSs prior to the receipt of shares and (ii) deliver shares prior to the receipt of ADSs for withdrawal of deposited securities, including ADSs which were issued under (i) above but for which shares may not have been received (each such transaction a “pre-release”). The depositary may receive ADSs in lieu of shares under (i) above (which ADSs will promptly be canceled by the depositary upon receipt by the depositary) and receive shares in lieu of ADSs under (ii) above. Each such pre-release will be subject to a written agreement whereby the person or entity (the “applicant”) to whom ADSs or shares are to be delivered (a) represents that at the time of the pre-release the applicant or its customer owns the shares or ADSs that are to be delivered by the applicant under such pre-release, (b) agrees to indicate the depositary as owner of such shares or ADSs in its records and to hold such shares or ADSs in trust for the depositary until such shares or ADSs are delivered to the depositary or the custodian, (c) unconditionally guarantees to deliver to the depositary or the custodian, as applicable, such shares or ADSs, and (d) agrees to any additional restrictions or requirements that the depositary deems appropriate. Each such pre-release will be at all times fully collateralized with cash, U.S. government securities or such other collateral as the depositary deems appropriate, terminable by the depositary on not more than five (5) business days’ notice and subject to such further indemnities and credit regulations as the depositary deems appropriate. The depositary will normally limit the number of ADSs and shares involved in such pre-release at any one time to thirty percent (30%) of the ADSs outstanding (without giving effect to ADSs outstanding under (i) above), provided, however, that the depositary reserves the right to change or disregard such limit from time to time as it deems appropriate. The depositary may also set limits with respect to the number of ADSs and shares involved in pre-release with any one person on a case-by-case basis as it deems appropriate. The depositary may retain for its own account any compensation received by it in conjunction with the foregoing. Collateral provided pursuant to (b) above, but not the earnings thereon, shall be held for the benefit of the registered holders of ADRs (other than the applicant).

Appointment

In the deposit agreement, each registered holder of ADRs and each person holding an interest in ADSs, upon acceptance of any ADSs (or any interest therein) issued in accordance with the terms and conditions of the deposit agreement will be deemed for all purposes to:

 

   

be a party to and bound by the terms of the deposit agreement and the applicable ADR or ADRs, and

 

   

appoint the depositary its attorney-in-fact, with full power to delegate, to act on its behalf and to take any and all actions contemplated in the deposit agreement and the applicable ADR or ADRs, to adopt any and

 

203


Table of Contents
 

all procedures necessary to comply with applicable laws and to take such action as the depositary in its sole discretion may deem necessary or appropriate to carry out the purposes of the deposit agreement and the applicable ADR and ADRs, the taking of such actions to be the conclusive determinant of the necessity and appropriateness thereof.

Governing Law

The deposit agreement and the ADRs shall be governed by and construed in accordance with the laws of the State of New York. In the deposit agreement, we have submitted to the jurisdiction of the courts of the State of New York and appointed an agent for service of process on our behalf.

 

204


Table of Contents

SHARES ELIGIBLE FOR FUTURE SALE

Upon completion of this offering, we will have 5,835,000 outstanding ADSs representing approximately 26.8% of our ordinary shares in issue. All of the ADSs sold in this offering will be freely transferable by persons other than our “affiliates” without restriction or further registration under the Securities Act. Sales of substantial amounts of our ADSs in the public market could adversely affect prevailing market prices of our ADSs. Prior to this offering, there has been no public market for our ordinary shares or the ADSs, and while our application to list our ADSs on the NYSE has been approved, we cannot assure you that a regular trading market will develop in the ADSs. We do not expect that a trading market will develop for our ordinary shares not represented by the ADSs.

Lock-Up Agreements

Each of our shareholders, directors and executive officers has agreed, subject to some exceptions, not to transfer or dispose of, directly or indirectly, any of our ordinary shares, in the form of ADSs or otherwise, or any securities convertible into or exchangeable or exercisable for or substantially similar to our ordinary shares, in the form of ADSs or otherwise, for a period of 180 days after the date this prospectus becomes effective. After the expiration of the 180-day period, the ordinary shares or ADSs held by our directors, executive officers or certain of our other existing shareholders may be sold subject to the restrictions under Rule 144 under the Securities Act or by means of registered public offerings.

In addition, our option holders have agreed with us that the ordinary shares they receive when they exercise their share options will be subject to the foregoing lock-up related to our directors, executive officers and certain of our other existing shareholders until the later of (i) the first anniversary of the grant date, and (ii) the expiration of the aforementioned 180-day lock-up period.

The 180-day restricted period is subject to adjustment under certain circumstances. If (1) during the last 17 days of the 180-day restricted period, we release earnings results or material news or a material event relating; or (2) prior to the expiration of the 180-day lock-up period, we announce that we will release earnings results during the 16-day period following the last day of the 180-day period, then the lock-up will continue to apply until the expiration of the 18-day period beginning on the release of the earnings results or the announcement of the material news or material event, as applicable, unless, with respect to the lock-up period applicable to us and our directors, executive officers and our other existing shareholders, such lock-up is waived by the representative.

Rule 144

Under Rule 144, a person who has beneficially owned restricted ordinary shares or warrants for at least six months would be entitled to sell their securities provided that (i) such person is not one of our affiliates at the time of, or has not been one of our affiliates at any time during the three months preceding, a sale and (ii) we are subject to the Exchange Act periodic reporting requirements for at least 90 days before the sale.

Persons who have beneficially owned restricted ordinary shares or warrants for at least six months but who are our affiliates at the time of, or at any time during the three months preceding, a sale, would be subject to additional restrictions, by which such person would be entitled to sell within the proceeding three months only a number of securities that does not exceed the greater of either of the following:

 

   

1% of the total number of ordinary shares then outstanding, which will equal 869,279 shares immediately after this offering (or 904,289 if the underwriters exercise their option to purchase additional ADSs); or

 

   

the average weekly trading volume of the ADSs on the NYSE during the four calendar weeks preceding the filing of a notice on Form 144 with respect to the sale;

provided, in each case, that we are subject to the Exchange Act periodic reporting requirements for at least 90 days before the sale.

 

205


Table of Contents

Sales under Rule 144 must be made through unsolicited brokers’ transactions. They are also subject to manner of sale provisions, notice requirements and the availability of current public information about us.

Rule 701

Beginning 90 days after the date of this prospectus, persons other than affiliates who purchased ordinary shares under a written compensatory plan or contract may be entitled to sell such shares in the United States in reliance on Rule 701. Rule 701 permits affiliates to sell their Rule 701 shares under Rule 144 without complying with the holding period requirements of Rule 144. Rule 701 further provides that non-affiliates may sell these shares in reliance on Rule 144 subject only to its manner-of-sale requirements. However, the Rule 701 shares would remain subject to lock-up arrangements and would only become eligible for sale when the lock-up period expires.

As of the date of this prospectus, we had granted options for an aggregate of 4,536,480 ordinary shares to our directors, officers and employees under our 2009 Long Term Incentive Plan.

Registration Rights

Upon completion of this offering, certain holders of our ordinary shares, in the form of ADSs or otherwise, or their transferees will be entitled to request that we register their shares under the Securities Act, following the expiration of the lockup agreements described above. See “Description of Share Capital — Registration Rights.”

 

206


Table of Contents

TAXATION

The following summary of the material Cayman Islands, Hong Kong, PRC and United States federal income tax consequences of an investment in our ADSs or ordinary shares is based upon laws and relevant interpretations thereof in effect as of the date of this prospectus, all of which are subject to change. This summary does not deal with all possible tax consequences relating to an investment in our ADSs or ordinary shares, such as the tax consequences under United States state or local tax laws, or tax laws of jurisdictions other than the Cayman Islands, Hong Kong, PRC and the United States. To the extent that the discussion relates to matters of Cayman Islands tax law, it represents the opinion of Conyers Dill & Pearman, our Cayman Islands counsel. To the extent that the discussion relates to matters of Hong Kong tax law, it represents the opinion of Baker & McKenzie LLP, our Hong Kong counsel. To the extent that the discussion relates to matters of PRC tax law, it represents the opinion of Chen & Co. Law Firm, our PRC counsel.

Cayman Islands Taxation

The Cayman Islands currently levy no taxes on individuals or corporations based upon profits, income, gains or appreciation and there is no taxation in the nature of inheritance tax or estate duty. No Cayman Islands stamp duty will be payable unless an instrument is executed in, brought to, or produced before a court of the Cayman Islands. The Cayman Islands are not parties to any double tax treaties. There are no exchange control regulations or currency restrictions in the Cayman Islands.

Hong Kong Taxation

The following is a summary of the material Hong Kong tax consequences of the ownership of the ADSs by an investor that purchases such ADSs in connection of this offering and holds the ADSs as capital assets. This summary does not purport to address all possible tax consequences of the ownership of the ADSs, and does not take into account the specific circumstances of any particular investors (such as tax-exempt entities, certain insurance companies, broker-dealers etc.), some of which may be subject to special rules. This summary is based on the tax laws of Hong Kong as in effect on the date of this prospectus.

Hong Kong Profits Tax

Hong Kong profits tax would only apply if the investor is carrying on a business in Hong Kong and derives a Hong Kong sourced profit from the trading of the ADSs. The profits tax rate applicable to individuals for year of assessment 2010/11 is 15%. The profits tax rate applicable to companies for year of assessment 2010/11 is 16.5%.

Trades of the ADSs executed on the New York Stock Exchange would generally be considered to be effected in the United States and therefore any profits on disposal would be considered to be non-Hong Kong sourced and hence not subject to Hong Kong tax. This general principle may not apply to the trading profits of certain investors due to the nature of their business (e.g., insurances companies) or the way their transaction is arranged (e.g., off exchange transactions).

Dividends Received on ADSs

According to the current tax practice of the Hong Kong Inland Revenue Department, dividends paid by us on ADSs would not be subject to any Hong Kong tax, even if received by investors in Hong Kong.

Capital Gains From the Sale of ADSs

There is no tax on capital gains in Hong Kong. If the investor is carrying on a business in Hong Kong and derives Hong Kong source profits from the disposal of the ADSs, the onus will be on the investor to prove that the gains are capital in nature.

 

207


Table of Contents

Stamp Duty

No Hong Kong stamp duty is payable on the purchase and sale of the ADSs.

People’s Republic of China Taxation

The following is a summary of the material PRC tax consequences of the ownership of the ADSs by an investor that purchases such ADSs in connection with this offering and holds the ADSs as capital assets. This summary does not purport to address all possible tax consequences of the ownership of the ADSs and does not take into account the specific circumstances of any particular investors (such as tax-exempt entities, certain insurance companies, broker-dealers etc.), some of which may be subject to special rules. This summary is based on the tax laws of the PRC as in effect on the date of this prospectus.

In 2007, the PRC government promulgated the new Enterprise Income Tax Law, or the EIT Law of the PRC, and the relevant implementation regulations, both of which became effective on January 1, 2008. The EIT Law provides that enterprises established outside China whose “de facto management bodies” are located in China are considered “tax resident enterprises”. Under the implementation regulations, “de facto management bodies” is defined as the bodies that have, in substance, overall management control over such aspects as the production and business, personnel, accounts and properties of an enterprise. The implementation regulations of the EIT Law also provides that, (i) if the enterprise that distributes dividends is domiciled in the PRC, or (ii) if gains are realized from transferring equity interests of enterprises domiciled in China, then such dividends or capital gains are treated as China-sourced income.

The EIT Law and the implementation regulations have only recently taken effect. Currently there are no detailed rules or precedents, which are applicable to our company or Paker, governing the procedures and specific criteria for determining “domicile”. As such, it is not clear how “domicile” will be interpreted under the EIT Law. It may be interpreted as the jurisdiction where the enterprise is incorporated or where the enterprise is a tax resident. A substantial majority of our management team as well as the management team of Paker are located in China. If our company and Paker are considered PRC tax resident enterprises for tax purposes, any dividends we pay to our overseas shareholders or ADSs holders as well as any gains realized by such shareholders or ADSs holders from the transfer of our shares or ADSs may be regarded as China-sourced income and, consequently, be subject to PRC enterprise income tax at 10% or a lower treaty rate.

U.S. Federal Income Taxation

Introduction

The following discussion, subject to the qualifications herein, is the opinion of Baker & McKenzie LLP, our U.S. counsel, on the material U.S. federal income tax consequences of the purchase, ownership and disposition of the ordinary shares or ADSs (evidenced by ADRs) by U.S. Holders (as defined below). This discussion applies only to U.S. Holders that purchase the ordinary shares or ADSs in the offering and hold the ordinary shares or ADSs as capital assets. This discussion is based on the Internal Revenue Code of 1986, as amended (the “Code”), Treasury regulations promulgated thereunder, and administrative and judicial interpretations thereof, all as in effect on the date hereof and all of which are subject to change, possibly with retroactive effect, or to different interpretation. This discussion does not address all of the tax considerations that may be relevant to specific U.S. Holders in light of their particular circumstances or to U.S. Holders subject to special treatment under U.S. federal income tax law (such as banks, other financial institutions, insurance companies, tax-exempt entities, retirement plans, regulated investment companies, partnerships, dealers in securities, brokers, U.S. expatriates, persons subject to the alternative minimum tax, persons who have acquired the shares or ADSs as part of a straddle, hedge, conversion transaction or other integrated investment, persons that have a “functional currency” other than the U.S. dollar or persons that own (or are deemed to own) 10% or more (by voting power) of our stock). If a partnership holds ordinary shares or ADSs, the consequences to a partner will generally depend upon

 

208


Table of Contents

the status of the partner and upon the activities of the partnership. A partner of a partnership holding ordinary shares or ADSs should consult its own tax advisor regarding the U.S. tax consequences of its investment in the ordinary shares or ADSs through the partnership. This discussion does not address any U.S. state or local or non-U.S. tax considerations or any U.S. federal estate, gift or alternative minimum tax considerations.

As used in this discussion, the term “U.S. Holder” means a beneficial owner of the ordinary shares or ADSs that is, for U.S. federal income tax purposes, (i) an individual who is a citizen or resident of the United States, (ii) a corporation, or other entity classified as a corporation for U.S. federal income tax purposes, created or organized in or under the laws of the United States or of any state or political subdivision thereof or therein, including the District of Columbia, (iii) an estate, the income of which is subject to U.S. federal income tax regardless of the source thereof, or (iv) a trust with respect to which a court within the United States is able to exercise primary supervision over its administration and one or more U.S. persons have the authority to control all of its substantial decisions, or certain electing trusts that were in existence on August 19, 1996 and were treated as domestic trusts on that date.

In general, for U.S. federal income tax purposes, a U.S. Holder of an ADS will be treated as the owner of the ordinary shares represented by the ADSs and exchanges of ordinary shares for ADSs, and ADSs for ordinary shares, will not be subject to U.S. federal income tax.

The U.S. treasury has expressed concerns that intermediaries in the chain of ownership between the holder of an ADS and the issuer of the security underlying the ADS may be taking actions that are inconsistent with the claiming of foreign tax credits for U.S. Holders of ADSs. Such actions would also be inconsistent with the claiming of the reduced rate of tax, described below, applicable to dividends received by certain non-corporate holders. Accordingly, the analysis of the creditability of PRC taxes and the availability of the reduced tax rate for dividends received by certain non-corporate holders, each described below, could be affected by actions taken by intermediaries in the chain of ownership between the holder of an ADS and our company.

PROSPECTIVE INVESTORS SHOULD CONSULT THEIR TAX ADVISORS AS TO THE PARTICULAR TAX CONSIDERATIONS APPLICABLE TO THEM RELATING TO THE PURCHASE, OWNERSHIP AND DISPOSITION OF THE ORDINARY SHARES OR ADSs, INCLUDING THE APPLICABILITY OF U.S. FEDERAL, STATE AND LOCAL TAX LAWS OR NON-U.S. TAX LAWS, ANY CHANGES IN APPLICABLE TAX LAWS AND ANY PENDING OR PROPOSED LEGISLATION OR REGULATIONS.

Dividends

Subject to the discussion below under “— Passive Foreign Investment Company”, the gross amount of any distribution made by us on the ordinary shares or ADSs generally will be treated as a dividend includible in the gross income of a U.S. Holder as ordinary income to the extent of our current or accumulated earnings and profits, as determined under U.S. federal income tax principles, when received by the U.S. Holder, in the case of ordinary shares, or when actually or constructively received by the Depositary, in the case of ADSs. To the extent the amount of such distribution exceeds our current and accumulated earnings and profits as so computed, it will be treated first as a non-taxable return of capital to the extent of such U.S. Holder’s adjusted tax basis in such ordinary shares or ADSs and, to the extent the amount of such distribution exceeds such adjusted tax basis, will be treated as gain from the sale of such ordinary shares or ADSs. We, however, may not calculate earnings and profits in accordance with U.S. tax principles. In this case, all distributions by us to U.S. Holders will generally be treated as dividends.

Certain dividends received by non-corporate U.S. Holders, including individuals, in taxable years beginning before January 1, 2011, generally will be subject to a maximum income tax rate of 15%. This reduced income tax rate is applicable to dividends paid by “qualified foreign corporations” and only with respect to ordinary shares or ADSs held for a minimum holding period of at least 61 days during a specified 121-day period, and if certain

 

209


Table of Contents

other conditions are met. We expect to be considered a qualified foreign corporation because our ADSs will be listed on the NYSE. Accordingly, subject to the conditions described above and the discussions below under “— Passive Foreign Investment Company”, dividends paid by us generally will be eligible for the reduced income tax rate. A qualified foreign corporation also includes a foreign corporation that is eligible for the benefits of an income tax treaty with the United States, which the Secretary of the United States Treasury has determined is satisfactory for purposes of the reduced rate and which includes an exchange of information program. The Secretary of the United States Treasury has determined that the United States income tax treaty with China satisfies these requirements. In the event that we are deemed to be a PRC resident enterprise under the EIT Law and if we are eligible for the benefits of the income tax treaty between the United States and China, dividends we pay on the ordinary shares, regardless of whether such shares are represented by ADSs, would be subject to a maximum income tax rate of 15% (subject to the general conditions for the reduced tax rate on dividends described above). Dividends paid by us will not be eligible for the “dividends received” deduction generally allowed to corporate shareholders with respect to dividends received from U.S. corporations.

The U.S. Treasury Department has announced its intention to promulgate rules pursuant to which U.S. Holders of the ordinary shares or ADSs and intermediaries through whom such ordinary shares or ADSs are held will be permitted to rely on certifications from issuers to establish that dividends are treated as qualified dividends. Because such rules have not yet been issued, it is not clear whether we will be in a position to comply with them. U.S. Holders should consult their own tax advisors regarding the availability of the reduced dividend tax rate in the light of their particular circumstances.

Dividends paid by us will constitute income from sources outside the United States for U.S. foreign tax credit limitation purposes and will be categorized as “passive category income” or, in the case of certain U.S. Holders, as “general category income” for U.S. foreign tax credit purposes. Furthermore, in certain circumstances, if U.S. Holders have held the ADSs or ordinary shares for less than a specified minimum period during which such U.S. Holders are not protected from risk of loss, or are obligated to make payments related to the dividends, such U.S. Holders will not be allowed a foreign tax credit for any PRC withholding taxes imposed on dividends paid on the ADSs or ordinary shares. The rules relating to the U.S. foreign tax credit are complex. U.S. Holders should consult their own tax advisors regarding the effect of these rules in their particular circumstance.

In the event that we are deemed to be a PRC resident enterprise under the EIT Law, PRC withholding taxes may be imposed on dividends paid with respect to the ordinary shares or ADSs. U.S. Holders should consult their tax advisors regarding whether such PRC withholding taxes may be eligible for credit against their U.S. federal income tax liability under their particular circumstances.

A distribution of additional ordinary shares or ADSs to U.S. Holders with respect to their ordinary shares or ADSs that is made as part of a pro rata distribution to all shareholders generally will not be subject to U.S. federal income tax.

Sale or Other Disposition of Ordinary Shares or ADSs

Subject to the discussion below under “— Passive Foreign Investment Company”, a U.S. Holder generally will recognize gain or loss for U.S. federal income tax purposes upon a sale or other disposition of the ordinary shares or ADSs in an amount equal to the difference between the amount realized from such sale or disposition and the U.S. Holder’s adjusted tax basis in such ordinary shares or ADSs. Such gain or loss generally will be a capital gain or loss and will be long-term capital gain (taxable at a reduced rate for non-corporate U.S. Holders, including individuals) or loss if, on the date of sale or disposition, such ordinary shares or ADSs were held by such U.S. Holder for more than one year. The deductibility of capital losses is subject to significant limitations. Any gain or loss on the sale or disposition will be treated as U.S. source income or loss for U.S. foreign tax credit limitation purposes. However, in the event that we are deemed to be a PRC “resident enterprise” under the PRC tax law, a U.S. Holder may be eligible for the benefits of the income tax treaty between the United States and the

 

210


Table of Contents

PRC. Under that treaty, if any PRC tax was to be imposed on any gain from the disposition of the ADSs or ordinary shares, the gain may be treated as PRC-source income. U.S. Holders are urged to consult their tax advisors regarding the tax consequences if a foreign withholding tax is imposed on a disposition of ADSs or ordinary shares, including the availability of the foreign tax credit under their particular circumstances.

Passive Foreign Investment Company

Based on the composition of our assets and income and the current expectations regarding the amount of the proceeds of the Offering, we believe that we were not a PFIC for U.S. federal income tax purposes with respect to our 2009 taxable year and we do not intend or anticipate becoming a PFIC for 2010 or any future taxable year. The determination of PFIC status is a factual determination that must be made annually at the close of each taxable year. Because PFIC status is a factual determination based on actual results for the entire taxable year, our U.S. counsel expresses no opinion with respect to our PFIC status and expresses no opinion with respect to our expectations contained in this paragraph. Changes in the nature of our income or assets, the manner and rate at which we spend the Offering’s proceeds, or a decrease in the trading price of the ordinary shares or ADSs may cause us to be considered a PFIC in the current or any subsequent year. However, as noted above, there can be no certainty in this regard until the close of the 2010 taxable year.

In general, a non-U.S. corporation will be treated as a PFIC for U.S. federal income tax purposes in any taxable year in which either (i) at least 75% of its gross income is “passive income” or (ii) on average at least 50% of the value of its assets is attributable to assets that produce passive income or are held for the production of passive income. Passive income for this purpose generally includes, among other things, dividends, interest, royalties, rents and gains from commodities and securities transactions. Passive income does not include rents and royalties derived from the active conduct of a trade or business. If we own at least 25% (by value) of the stock of another corporation, we will be treated, for purposes of the PFIC tests, as owning our proportionate share of the other corporation’s assets and receiving our proportionate share of the other corporation’s income.

If we are a PFIC in any year during which a U.S. Holder owns the ordinary shares or ADSs, such U.S. Holder may experience certain adverse tax consequences. Such U.S. Holder could be liable for additional taxes and interest charges upon i) distributions received by the U.S. Holder on our ordinary shares or ADSs during the year, but only to the extent that the aggregate of the distributions for the taxable year exceeds 125% of the average amount of distributions received by the U.S. Holder in the preceding three years, or (ii) upon a sale or other disposition of the ordinary shares or ADSs at a gain, whether or not we continue to be a PFIC (each an “excess distribution”). The tax will be determined by allocating the excess distribution ratably to each day of the U.S. Holder’s holding period. The amount allocated to the current taxable year and any taxable year with respect to which we were not a PFIC will be taxed as ordinary income (rather than capital gain) earned in the current taxable year. The amount allocated to other taxable years will be taxed at the highest marginal rates applicable to ordinary income for such taxable years and, in addition, an interest charge will be imposed on the amount of such taxes.

These adverse tax consequences may be avoided if the U.S. Holder is eligible to and does elect to annually mark-to-market the ordinary shares or ADSs. If a U.S. Holder makes a mark-to-market election, such holder will generally include as ordinary income the excess, if any, of the fair market value of the ADSs or ordinary shares at the end of each taxable year over their adjusted basis, and will be permitted an ordinary loss in respect of the excess, if any, of the adjusted basis of the ADSs or ordinary shares over their fair market value at the end of the taxable year (but only to the extent of the net amount of previously included income as a result of the mark-to-market election). Any gain recognized on the sale or other disposition of the ADSs or ordinary shares will be treated as ordinary income. The mark-to-market election is available only for “marketable stock,” which is stock that is traded in other than de minimis quantities on at least 15 days during each calendar quarter on a qualified exchange or other market, as defined in the applicable Treasury regulations. We expect the ADSs or ordinary shares to be “marketable stock” because our ADSs will be listed on the NYSE.

 

211


Table of Contents

A U.S. Holder’s adjusted tax basis in the ADSs or ordinary shares will be increased by the amount of any income inclusion and decreased by the amount of any deductions under the mark-to-market rules. If a U.S. Holder makes a mark-to-market election it will be effective for the taxable year for which the election is made and all subsequent taxable years unless the ADSs or ordinary shares are no longer regularly traded on a qualified exchange or the Internal Revenue Service consents to the revocation of the election. U.S. Holders are urged to consult their tax advisors about the availability of the mark-to-market election, and whether making the election would be advisable in their particular circumstances.

The above results may also be eliminated if a US Holder is eligible for and makes a valid qualified electing fund election, or QEF election. If a QEF election is made, such US Holder generally will be required to include in income on a current basis its pro rata share of its ordinary income and its net capital gains. We do not intend to prepare or provide the information that would entitle U.S. Holders to make a QEF election.

If we are regarded as a PFIC, a U.S. Holder of ordinary shares or ADSs must make an annual return on IRS Form 8621 as directed by the secretary of the Treasury. The reduced tax rate for dividend income, as discussed above under “Dividend Policy” is not applicable to a dividend paid by us if we are a PFIC for either the year the dividend is paid or the preceding year.

Prospective investors should consult their own tax advisors regarding the U.S. federal income tax consequences of an investment in a PFIC.

Backup Withholding Tax and Information Reporting Requirements

Dividend payments made to U.S. Holders and proceeds paid from the sale or other disposition of their ordinary shares or ADSs may be subject to information reporting to the Internal Revenue Service and possible U.S. federal backup withholding at a current rate of 28%. Certain exempt recipients (such as corporations) are not subject to these information reporting requirements. Backup withholding will not apply to a U.S. Holder who furnishes a correct taxpayer identification number and makes any other required certification, or who is otherwise exempt from backup withholding. U.S. Holders who are required to establish their exempt status generally must provide IRS Form W-9 (Request for Taxpayer Identification Number and Certification).

Backup withholding is not an additional tax. Amounts withheld as backup withholding may be credited against a U.S. Holder’s U.S. federal income tax liability. A U.S. Holder may obtain a refund of any excess amounts withheld under the backup withholding rules by filing the appropriate claim for refund with the Internal Revenue Service in a timely manner and furnishing any required information.

Prospective investors should consult their own tax advisors as to their qualification for an exemption from backup withholding and the procedure for obtaining this exemption.

 

212


Table of Contents

UNDERWRITING

We and the underwriters named below have entered into an underwriting agreement with respect to the ADSs being offered. Subject to certain conditions, each underwriter has severally agreed to purchase the number of ADSs indicated in the following table. Credit Suisse Securities (USA) LLC is acting as the representative of the underwriters named below. Credit Suisse Securities (USA) LLC’s address is Eleven Madison Avenue, New York, New York 10012-3629.

 

Underwriters

   Number of ADSs

Credit Suisse Securities (USA) LLC

  

Oppenheimer & Co. Inc.

  

Roth Capital Partners, LLC.

  

Collins Stewart LLC.

  
    

Total

   5,835,000
    

The underwriters are committed to take and pay for all of the ADSs being offered, if any are taken, other than the ADSs covered by the option described below unless and until this option is exercised.

If the underwriters sell more ADSs than the total number set forth in the table above, the underwriters have an option to buy up to an additional 875,250 ADSs from us to cover such sales. They may exercise that option for 30 days from the date of this prospectus. If any ADSs are purchased pursuant to this option, the underwriters will severally purchase ADSs in approximately the same proportion as set forth in the table above.

The following table shows the per ADS and total underwriting discounts and commissions to be paid to the underwriters by us. These amounts are shown assuming both no exercise and full exercise of the underwriters’ option to purchase a total of 875,250 additional ADSs.

 

Paid by Us

   No Exercise    Full Exercise

Per ADS

   US$                 US$             

Total

   US$      US$  

Total underwriting discounts and commissions to be paid to the underwriters represent             % of the total amount of the offering.

ADSs sold by the underwriters to the public will initially be offered at the initial public offering price set forth on the cover of this prospectus. Any ADSs sold by the underwriters to securities dealers may be sold at a discount of up to US$             per ADS from the initial public offering price. Any such securities dealers may resell any ADSs purchased from the underwriters to certain other brokers or dealers at a discount of up to US$             per ADS from the initial public offering price. If all the ADSs are not sold at the initial public offering price, the representative may change the offering price and the other selling terms.

Total expenses payable by us in connection with this offering are estimated to be approximately US$3.8 million, including SEC registration fees of US$6,220, the Financial Industry Regulatory Authority, Inc. (formerly, the National Association of Securities Dealers, Inc.), or FINRA, filing fees of US$10,250, NYSE listing fee of US$125,000, printing expenses of approximately US$0.4 million, legal fees of approximately US$2.0 million, accounting fees of approximately US$0.6 million, roadshow costs and expenses of approximately US$0.5 million, and travel and other out-of-pocket expenses of approximately US$0.1 million. All amounts are estimated except for the fees relating to SEC registration, FINRA filing and NYSE listing. The offering of the ADSs by the underwriters is subject to receipt and acceptance and subject to the underwriters’ right to reject any order in whole or in part.

We have agreed to pay all fees and expenses we incur in connection with this offering. We have also agreed to reimburse Credit Suisse Securities (USA) LLC and other underwriters up to US$             or             % of the total gross proceeds we will receive from this offering for their reasonable expenses, including the fees and disbursements of the underwriters’ counsel. Such reimbursement is deemed to be underwriting compensation by

 

213


Table of Contents

FINRA. In addition, we will reimburse the underwriters for any sales, use or similar taxes (including additions to such taxes, if any), arising in connection with this offering.

We have agreed with the underwriters not to, without the prior consent of the representative, for a period of 180 days following the date of this prospectus, offer, sell, contract to sell, pledge, grant any option to purchase, make any short sale or otherwise transfer or dispose of (including entering into any swap or other agreement that transfers to any other entity, in whole or in part, any of the economic consequences of ownership interest): (1) our ordinary shares and depositary shares representing our ordinary shares; (2) shares of our subsidiaries and controlled affiliates and depositary shares representing those shares; and (3) securities that are substantially similar to such shares or depositary shares. We have also agreed to cause our subsidiaries and controlled affiliates to abide by the restrictions of the lock-up agreement. In addition, all of our shareholders and all of our directors and executive officers have entered into a similar 180-day lock-up agreement with respect to our ordinary shares, depositary shares representing our ordinary shares and securities that are substantially similar to our ordinary shares or depositary shares representing our ordinary shares. The restrictions of our lock-up agreement do not apply to the issuance of securities pursuant to the 2009 Long Term Incentive Plan outstanding on the date of this prospectus of which the underwriters have been advised in writing and is described in “Shares Eligible for Future Sale” of this prospectus.

The 180-day lock-up period described in the preceding paragraph will be automatically extended if: (1) during the last 17 days of the 180-day restricted period, we release earnings results or announce material news or a material event; or (2) prior to the expiration of the 180-day lock-up period, we announce that we will release earnings results during the 16-day period following the last day of the 180-day period, in each case until the expiration of the 18-day period beginning on the date of the release of the earnings results or the announcement of the material news or event, as applicable.

Prior to the offering, there has been no public market for our ADSs or ordinary shares. The initial public offering price of the ADSs will be determined by agreement between us and the representative. Among the factors to be considered in determining the initial public offering price of the ADSs, in addition to prevailing market conditions, will be our historical performance, estimates of our business potential and earnings prospects, an assessment of our management and the consideration of the above factors in relation to market valuation of companies in related businesses.

We have received approval to list our ADSs on the NYSE under the symbol “JKS”.

In connection with the offering, the underwriters may purchase and sell ADSs in the open market. These transactions may include short sales, stabilizing transactions and purchases to cover positions created by short sales. Short sales involve the sale by the underwriters of a greater number of ADSs than they are required to purchase in the offering. “Covered” short sales are sales made in an amount not greater than the underwriters’ option to purchase additional ADSs from us in the offering. The underwriters may close out any covered short position by either exercising their option to purchase additional ADSs or purchasing ADSs in the open market. In determining the source of ADSs to close out the covered short position, the underwriters will consider, among other things, the price of ADSs available for purchase in the open market as compared to the price at which they may purchase additional ADSs pursuant to the option granted to them. “Naked” short sales are any sales in excess of such option. The underwriters must close out any naked short position by purchasing ADSs in the open market. A naked short position is more likely to be created if the underwriters are concerned that there may be downward pressure on the price of the ADSs in the open market after pricing that could adversely affect investors who purchase in the offering. Stabilizing transactions consist of various bids for, or purchases of, ADSs made by the underwriters in the open market prior to the completion of the offering.

The underwriters may also impose a penalty bid. This occurs when a particular underwriter repays to the underwriters a portion of the underwriting discount received by it because the representative has repurchased ADSs sold by, or for the account of, such underwriter in stabilizing or short covering transactions.

 

214


Table of Contents

Purchases to cover a short position and stabilizing transactions, as well as other purchases by the underwriters for their own accounts, may have the effect of preventing or retarding a decline in the market price of the ADSs, and together with the imposition of the penalty bid, may stabilize, maintain or otherwise affect the market price of the ADSs. As a result, the price of the ADSs may be higher than the price that otherwise might exist in the open market. If these activities are commenced, they are required to be conducted in accordance with applicable laws and regulations, and they may be discontinued at any time. These transactions may be effected on the NYSE, the over-the-counter market or otherwise.

Australia. This prospectus is not a disclosure document under Chapter 6D of the Corporations Act 2001 (Cth), or the Australian Corporations Act, has not been lodged with the Australian Securities and Investments Commission and does not purport to include the information required of a disclosure document under Chapter 6D of the Australian Corporations Act. Accordingly, (i) the offer of the ADSs under this prospectus is only made to persons to whom it is lawful to offer the ADSs without disclosure under Chapter 6D of the Australian Corporations Act under one or more exemptions set out in section 708 of the Australian Corporations Act, (ii) this prospectus is made available in Australia only to those persons as set forth in clause (i) above, and (iii) the offeree must be sent a notice stating in substance that by accepting this offer, the offeree represents that the offeree is such a person as set forth in clause (i) above, and, unless permitted under the Australian Corporations Act, agrees not to sell or offer for sale within Australia any of the ADSs sold to the offeree within 12 months after its transfer to the offeree under this prospectus.

Canada. Each underwriter will be deemed to have represented and agreed that (i) it has not offered or sold and will not offer or sell, any ADSs, directly or indirectly, in any province or territory of Canada or to, or for the benefit of, any resident of any province or territory of Canada in contravention of the securities laws thereof and has represented that any offer or sale of ADSs in Canada will be made only (a) in accordance with an exemption from the requirement to file a prospectus in the province or territory of Canada in which such offer or sale is made, and (b) by a dealer duly registered under the applicable securities laws of that province or territory or in circumstances where an exemption from the applicable registered dealer requirements is available; and (ii) it will send to any dealer who purchases from it any of the ADSs a notice stating in substance that, by purchasing such ADSs, such dealer represents and agrees that it has not offered or sold, and it will not offer or sell, directly or indirectly, any of such ADSs in any province or territory of Canada or to, or for the benefit of, any resident of any province or territory of Canada in contravention of the securities laws thereof and that any offer or sale of ADSs in Canada will be made only (a) in accordance with an exemption from the requirement to file a prospectus in the province or territory of Canada in which such offer or sale is made, and (b) by a dealer duly registered under the applicable securities laws of that province or territory or in circumstances where an exemption from the applicable registered dealer requirements is available, and that such dealer will deliver to any other dealer to whom it sells any of such ADSs a notice containing substantially the same statement as is contained in this sentence. Each underwriter has also agreed to comply with all applicable laws and regulations, and make or obtain all necessary filings, consents or approvals, in each Canadian jurisdiction in which it purchases, offers, sells or delivers ADSs (including, without limitation, any applicable requirements relating to the delivery of this prospectus), in each case, at its own expense. In connection with sales of and offers to sell ADSs made by it, each underwriter will either furnish to each Canadian Person to whom any such sale or offer is made a copy of the then current prospectus, or inform such person that such prospectus will be made available upon request, and will keep an accurate record of the names and addresses of all persons to whom it gives copies of this prospectus, or any amendment or supplement to this prospectus; and when furnished with any subsequent amendment to this prospectus, any subsequent prospectus or any medium outlining changes in this prospectus, such underwriter will upon request of the representatives, promptly forward copies thereof to such persons or inform such persons that such amendment, subsequent prospectus or other medium will available upon request.

A “Canadian Person” means any national or resident of Canada (other than an individual resident in a Canadian province or territory where such individual is prohibited from purchasing securities under local provincial and territorial securities laws), or any corporation, person, profit-sharing or other trust or other entity organized under the laws of Canada or of any political subdivision thereof (other than a branch located outside

 

215


Table of Contents

Canada of any Canadian Person), and includes any Canadian branch of a person who is otherwise not a Canadian Person.

Cayman Islands. This prospectus does not constitute an invitation or offer to the public in the Cayman Islands of the ADSs, whether by way of sale or subscription. The underwriters have not offered or sold, and will not offer or sell, directly or indirectly, any ADSs in the Cayman Islands.

European Economic Area. In relation to each Member State of the European Economic Area which has implemented the Prospectus Directive (each, a Relevant Member State), with effect from and including the date on which the Prospectus Directive is implemented in that Relevant Member State, or the Relevant Implementation Date, the ADSs may not be offered to the public in that Relevant Member State prior to the publication of a prospectus in relation to the ADSs which has been approved by the competent authority in that Relevant Member State or, where appropriate, approved in another Relevant Member State and notified to the competent authority in that Relevant Member State, all in accordance with the Prospectus Directive, except that the ADSs may, with effect from and including the Relevant Implementation Date, be offered to the public in that Relevant Member State at any time:

(a) to legal entities which are authorized or regulated to operate in the financial markets or, if not so authorized or regulated, whose corporate purpose is solely to invest in securities;

(b) to any legal entity which has two or more of (1) an average of at least 250 employees during the last financial year, (2) a total balance sheet of more than €43,000,000 and (3) an annual net turnover of more than €50,000,000, as shown in its last annual or consolidated accounts;

(c) to fewer than 100 natural or legal persons (other than qualified investors as defined in the Prospectus Directive) subject to obtaining the prior consent of the representative for any such offer; or

(d) in any other circumstances falling within Article 3(2) of the Prospectus Directive.

For the purposes of this provision, the expression an “offer of ADSs to the public” in relation to any of the ADSs in any Relevant Member States means the communication in any form and by any means of sufficient information on the terms of the offer and the ADSs to be offered so as to enable an investor to decide to purchase or subscribe for the ADSs, as the same may be varied in that Member State, by any measure implementing the Prospectus Directive in that Member State, and the expression Prospectus Directive means Directive 2003/71/EC and includes any relevant implementing measure in each Relevant Member State.

Hong Kong. The ADSs may not be offered or sold in Hong Kong by means of any document other than (i) in circumstances which do not constitute an offer to the public within the meaning of the Companies Ordinance (Cap.32, Laws of Hong Kong), or (ii) to “professional investors” as defined in the Securities and Futures Ordinance (Cap.571, Laws of Hong Kong) or any rules made thereunder, or (iii) in other circumstances which do not result in the document being a “prospectus” as defined in the Companies Ordinance (Cap.32, Laws of Hong Kong), and no advertisement, invitation or document relating to the ADSs may be issued or may be in the possession of any person for the purpose of issue (in each case whether in Hong Kong or elsewhere), which is directed at, or the contents of which are likely to be accessed or read by, the public in Hong Kong (except if permitted to do so under the securities laws of Hong Kong) other than with respect to ADSs which are or are intended to be disposed of only to persons outside Hong Kong or only to “professional investors” as defined in the Securities and Futures Ordinance (Cap.571, Laws of Hong Kong) or any rules made thereunder.

Japan. The ADSs have not been and will not be registered under the Financial Instruments and Exchange Law of Japan and may not be offered or sold, directly or indirectly, in Japan or to, or for the account or benefit of, any resident of Japan (which term as used herein means any person resident in Japan, including any corporation or other entity organized under the laws of Japan) or to, or for the account or benefit of, any person for reoffering or resale, directly or indirectly, in Japan or to, or for the account or benefit of, any resident of

 

216


Table of Contents

Japan, except (i) pursuant to an exemption from the registration requirements of, or otherwise in compliance with, the Financial Instruments and Exchange Law of Japan and (ii) in compliance with any other relevant laws and regulations of Japan.

PRC. This prospectus does not constitute a public offer of the ADSs, whether by way of sale or subscription, in the PRC (excluding, for purposes of this paragraph, Hong Kong). Other than to qualified domestic institutional investors in the PRC, the ADSs are not being offered and may not be offered or sold, directly or indirectly, in the PRC to or for the benefit of, legal or natural persons of the PRC. According to the laws and regulatory requirements of the PRC, with the exception of qualified domestic institutional investors in the PRC, the ADSs may, subject to the laws and regulations of the relevant jurisdictions, only be offered or sold to non-PRC natural or legal persons in Taiwan, Hong Kong or Macau or any country other than the PRC.

Singapore. This prospectus has not been registered as a prospectus with the Monetary Authority of Singapore. Accordingly, this prospectus and any other document or material in connection with the offer or sale, or invitation for subscription or purchase, of the ADSs may not be circulated or distributed, nor may the ADSs be offered or sold, or be made the subject of an invitation for subscription or purchase, whether directly or indirectly, to persons in Singapore other than (i) to an institutional investor under Section 274 of the Securities and Futures Act (Chapter 289), or the SFA, (ii) to a relevant person pursuant to Section 275(1) of the SFA, or any person pursuant to Section 275(1A), and in accordance with the conditions, specified in Section 275 of the SFA, or (iii) otherwise pursuant to, and in accordance with the conditions of, any other applicable provision of the SFA.

Where the ADSs are subscribed or purchased under Section 275 of the SFA by a relevant person which is:

(a) a corporation (which is not an accredited investor) the sole business of which is to hold investments and the entire share capital of which is owned by one or more individuals, each of whom is an accredited investor; or

(b) a trust (where the trustee is not an accredited investor) whose sole purpose is to hold investments and each beneficiary is an accredited investor,

shares, debentures and units of shares and debentures of that corporation or the beneficiaries’ rights and interest in that trust shall not be transferable for six months after that corporation or that trust has acquired the ADSs under Section 275 except:

 

  1.   to an institutional investor (for corporations, under Section 274 of the SFA) or to a relevant person, or any person pursuant to Section 275(2), or to any person pursuant to an offer that is made on terms that such shares, debentures and units of shares and debentures of that corporation or such rights and interest in that trust are acquired at a consideration of not less than S$200,000 (or its equivalent in a foreign currency) for each transaction, whether such amount is to be paid for in cash or by exchange of securities or other assets, and further for corporations, in accordance with the conditions, specified in Section 275 of the SFA;

 

  2.   where no consideration is given for the transfer; or

 

  3.   by operation of law.

State of Kuwait. The ADSs have not been authorized or licensed for offering, marketing or sale in the State of Kuwait. The distribution of this prospectus and the offering and sale of the ADSs in the State of Kuwait is restricted by law unless a license is obtained from the Kuwaiti Ministry of Commerce and Industry in accordance with Law 31 of 1990. Persons into whose possession this prospectus comes are required by us and the underwriters to inform themselves about and to observe such restrictions. Investors in the State of Kuwait who approach us or any of the underwriters to obtain copies of this prospectus are required by us and the underwriters to keep this prospectus confidential and not to make copies thereof or distribute the same to any other person and

 

217


Table of Contents

are also required to observe the restrictions provided for in all jurisdictions with respect to offering, marketing and the sale of the ADSs.

Switzerland. This prospectus does not constitute a prospectus within the meaning of Article 652a or 1156 of the Swiss Code of Obligations (Schweizerisches Obligationenrecht), and none of this offering and the ADSs has been or will be approved by any Swiss regulatory authority.

United Arab Emirates. This prospectus is not intended to constitute an offer, sale or delivery of ADSs or other securities under the laws of the United Arab Emirates (UAE). The ADSs have not been and will not be registered under Federal Law No. 4 of 2000 Concerning the Emirates Securities and Commodities Authority and the Emirates Security and Commodity Exchange, or with the UAE Central Bank, the Dubai Financial Market, the Abu Dhabi Securities Market or with any other UAE exchange.

This offering, the ADSs and interests therein have not been approved or licensed by the UAE Central Bank or any other relevant licensing authorities in the UAE, and do not constitute a public offer of securities in the UAE in accordance with the Commercial Companies Law, Federal Law No. 8 of 1984 (as amended) or otherwise.

In relation to its use in the UAE, this prospectus is strictly private and confidential and is being distributed to a limited number of investors and must not be provided to any person other than the original recipient, and may not be reproduced or used for any other purpose. The interests in the ADSs may not be offered or sold directly or indirectly to the public in the UAE.

United Kingdom. The ADSs may not be offered or sold other than to persons whose ordinary activities involve them in acquiring, holding, managing or disposing of investments (as principal or agent) for the purposes of their businesses or who it is reasonable to expect will acquire, hold, manage or dispose of investments (as principal or agent) for the purposes of their businesses where the issue of the ADSs would otherwise constitute a contravention of Section 19 of the Financial Services and Markets Act 2000 (the “FSMA”) by the issuer. In addition, no person may communicate or cause to be communicated any invitation or inducement to engage in investment activity (within the meaning of Section 21 of the FSMA) received by it in connection with the issue or sale of the ADSs other than in circumstances in which Section 21(1) of the FSMA does not apply to the issuer.

No action may be taken in any jurisdiction other than the United States that would permit a public offering of the ADSs or the possession, circulation or distribution of this prospectus in any jurisdiction where action for that purpose is required. Accordingly, the ADSs may not be offered or sold, directly or indirectly, and neither the prospectus nor any other offering material or advertisements in connection with the ADSs may be distributed or published in or from any country or jurisdiction except under circumstances that will result in compliance with any applicable rules and regulations of any such country or jurisdiction.

A prospectus in electronic format will be made available on the websites maintained by one or more of the underwriters or one or more securities dealers. One or more of the underwriters may distribute prospectuses electronically. Certain underwriters may agree to allocate a number of ADSs for sale to their online brokerage account holders. ADSs to be sold pursuant to an Internet distribution will be allocated on the same basis as other allocations. In addition, ADSs may be sold by the underwriters to securities dealers who resell ADSs to online brokerage account holders.

Some of the underwriters are expected to make offers and sales both in and outside the United States through their respective selling agents. Any offers and sales in the United States will be conducted by broker-dealers registered with the SEC.

The underwriters do not expect sales to discretionary accounts to exceed five percent of the total number of ADSs offered.

 

218


Table of Contents

We have agreed to indemnify the several underwriters against certain liabilities, including liabilities under the Securities Act.

This prospectus may be used by the underwriters and other dealers in connection with offers and sales of the ADSs, including ADSs initially sold by the underwriters in the offering being made outside of the United States, to persons located in the United States.

Some of the underwriters and their affiliates may in the future provide investment banking and other services to us, our officers or our directors for which they will receive customary fees and commissions.

Credit Suisse Securities (USA) LLC is acting as the sole global coordinator and sole bookrunner for this offering.

 

219


Table of Contents

ENFORCEABILITY OF CIVIL LIABILITIES

We are incorporated and existing under the laws of the Cayman Islands to take advantage of certain benefits associated with being a Cayman Islands exempted company, such as:

 

   

political and economic stability;

 

   

an effective judicial system;

 

   

a favorable tax system;

 

   

the absence of exchange control or currency restrictions; and

 

   

the availability of professional and support services.

However, certain disadvantages accompany incorporation in the Cayman Islands. These disadvantages include:

 

   

the Cayman Islands has a less developed body of securities laws as compared to the United States and provides significantly less protection to investors; and

 

   

Cayman Islands companies do not have standing to sue before the federal courts of the United States.

Our constituent documents do not contain provisions requiring that disputes, including those arising under the securities laws of the United States, between us, our officers, directors and shareholders, be arbitrated.

Substantially all of our current operations are conducted in China, and substantially all of our assets are located in China. A majority of our directors and officers are nationals or residents of jurisdictions other than the United States and a substantial portion of their assets are located outside the United States. As a result, it may be difficult for a shareholder to effect service of process within the United States upon us or such persons, or to enforce against us or them judgments obtained in United States courts, including judgments predicated upon the civil liability provisions of the securities laws of the United States or any state in the United States.

We have appointed CT Corporation System as our agent to receive service of process with respect to any action brought against us in the United States District Court for the Southern District of New York under the federal securities laws of the United States or any action brought against us in the Supreme Court of the State of New York in the County of New York under the securities laws of the State of New York.

Conyers Dill & Pearman, our counsel as to Cayman Islands law, and Chen&Co. Law Firm, our counsel as to PRC law, have advised us, respectively, that there is doubt as to whether the courts of the Cayman Islands and China, respectively, would:

 

   

recognize or enforce judgments of United States courts obtained against us or our directors or officers predicated upon the civil liability provisions of the federal securities laws of the United States or any state or territory in the United States; or

 

   

entertain original actions brought in the courts of the Cayman Islands or China against us or our directors or officers predicated upon the federal securities laws of the United States or any state or territory in the United States.

Conyers Dill & Pearman has further advised us that the courts of the Cayman Islands would generally recognize, as a valid judgment, a final and conclusive judgment in personam obtained in the federal or state courts of the United States against the company under which a sum of money is payable, (other than a sum payable in respect of multiple damages, taxes, or other charges of a like nature or in respect of a fine or other penalty) may and would give judgment based thereon, provided that (a) such federal or state courts of the United States had proper jurisdiction over the parties subject to such judgment; (b) such federal or state courts of the

 

220


Table of Contents

United States did not contravene the rules of natural justice of the Cayman Islands; (c) such judgment was not obtained by fraud; (d) the enforcement of the judgment would not be contrary to the public policy of the Cayman Islands; (e) no new admissible evidence relevant to the action is submitted prior to the rendering of the judgment by the courts of the Cayman Islands; and (f) there is due compliance with the correct procedures under the laws of the Cayman Islands.

There is no treaty in effect between the United States and the Cayman Islands providing for the enforcement of United States judgments in the Cayman Islands, and there are grounds upon which the Cayman Islands courts may decline to enforce the judgments of United States courts. The question whether a United States judgment would be enforceable in the Cayman Islands against us or our directors and officers depends upon whether the United States court that entered such judgment is recognized by the Cayman Islands Court as having jurisdiction over the judgment debtor, as determined by reference to the Cayman Islands conflict of law rules. In addition, certain remedies available under the laws of United States jurisdictions, including certain remedies available under the United States federal securities laws, may not be allowed or enforceable in the Cayman Islands courts to the extent that they are penal or contrary to Cayman Island’s public policy.

No original claim may be brought in the Cayman Islands against us, or our directors and officers for violation of the United States federal securities laws because these laws have no extraterritorial jurisdiction under Cayman Islands law and do not have force of law in the Cayman Islands. A Cayman Islands court may, however, impose civil liability on us, or our directors and officers if the facts alleged in a complaint constitute or give rise to a cause of action under Cayman Islands law.

Chen & Co. Law Firm has advised us further that the recognition and enforcement of foreign judgments are primarily provided for under Chinese Civil Procedures Law. PRC courts may recognize and enforce foreign judgments in accordance with the requirements of Chinese Civil Procedures Law based either on treaties between China and the country where the judgment is made or on reciprocity between jurisdictions. Currently, there are no treaties providing for reciprocity arrangements between the United States and the PRC for the recognition or enforcement of U.S. court judgments in China. In addition, in the event that foreign judgments contravene the basic principles of the laws of China, endanger state sovereignty or security, or are in conflict with the public interest of China, PRC courts will not recognize and enforce such foreign judgments.

 

221


Table of Contents

LEGAL MATTERS

Certain legal matters as to the United States federal law and New York State law in connection with this offering will be passed upon for us by Baker & McKenzie LLP. Certain legal matters as to the United States federal law and New York State law in connection with this offering will be passed upon for the underwriters by Simpson Thacher & Bartlett LLP. The validity of the ordinary shares represented by the ADSs offered in this offering and certain other legal matters as to Cayman Islands law will be passed upon for us by Conyers Dill & Pearman. Legal matters as to PRC law will be passed upon for us by Chen & Co. Law Firm and for the underwriters by Commerce & Finance Law Offices. Baker & McKenzie LLP may rely upon Conyers Dill & Pearman with respect to matters governed by Cayman Islands law and Chen & Co. Law Firm with respect to matters governed by PRC law. Simpson Thacher & Bartlett LLP may rely upon Commerce & Finance Law Offices with respect to matters governed by PRC law.

EXPERTS

The consolidated financial statements as of December 31, 2008 and 2009, and for the years ended December 31, 2007, 2008 and 2009, included in this prospectus have been so included in reliance on the report of PricewaterhouseCoopers Zhong Tian CPAs Limited Company, an independent registered public accounting firm, given on the authority of said firm as experts in auditing and accounting.

The offices of PricewaterhouseCoopers Zhong Tian CPAs Limited Company is located at 11th Floor, PricewaterhouseCoopers Center, 202 Hu Bin Road, Shanghai 200021, People’s Republic of China.

 

222


Table of Contents

WHERE YOU CAN FIND ADDITIONAL INFORMATION

We have filed with the SEC a registration statement on Form F-1, including relevant exhibits and schedules under the Securities Act with respect to underlying ordinary shares represented by the ADSs, to be sold in this offering. A related registration statement on F-6 will be filed with the SEC to register the ADSs. This prospectus, which constitutes a part of the registration statement, does not contain all of the information contained in the registration statement. You should read the registration statement and its exhibits and schedules for further information with respect to us and our ADSs.

Immediately upon completion of this offering, we will become subject to periodic reporting and other informational requirements of the Exchange Act as applicable to foreign private issuers. Accordingly, we will be required to file reports, including annual reports on Form 20-F, and other information with the SEC. All information filed with the SEC is available through the SEC’s Electronic Data Gathering, Analysis and Retrieval system, which may be accessed through the SEC’s website at www.sec.gov. Information filed with the SEC may also be inspected and copied at the public reference room maintained by the SEC at 100 F Street, N.E., Washington, D.C. 20549. You can request copies of these documents upon payment of a duplicating fee, by writing to the SEC. Please visit the SEC’s website at www.sec.gov for further information on the SEC’s public reference room.

As a foreign private issuer, we are exempt under the Exchange Act from, among other things, the rules prescribing the furnishing and content of proxy statements, and our executive officers, directors and principal shareholders are exempt from the reporting and short-swing profit recovery provisions contained in Section 16 of the Exchange Act. In addition, we will not be required under the Exchange Act to file periodic reports and financial statements with the SEC as frequently or as promptly as U.S. companies whose securities are registered under the Exchange Act. However, we intend to furnish the depositary with our annual reports, which will include a review of operations and annual audited consolidated financial statements prepared in conformity with U.S. GAAP, and all notices of shareholders’ meeting and other reports and communications that are made generally available to our shareholders. The depositary will make such notices, reports and communications available to holders of ADSs and, upon our request, will mail to all record holders of ADSs the information contained in any notice of a shareholders’ meeting received by the depositary from us.

 

223


Table of Contents

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

     Page

Report of Independent Registered Public Accounting Firm

   F-2

Consolidated Statements of Operations for the years ended December 31, 2007, 2008 and 2009

   F-3

Consolidated Balance Sheets as of December 31, 2008 and 2009

   F-4

Consolidated Statements of Changes in Equity for the years ended December 31, 2007, 2008 and 2009

   F-6

Consolidated Statements of Cash Flows for the years ended December 31, 2007, 2008 and 2009

   F-7

Notes to the Consolidated Financial Statements for the years ended December 31, 2007, 2008 and 2009

   F-9

 

F-1


Table of Contents

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Shareholders of JinkoSolar Holding Co., Ltd.:

In our opinion, the accompanying consolidated balance sheets and the related consolidated statements of operations, of changes in equity and of cash flows present fairly, in all material respects, the financial position of JinkoSolar Holding Co., Ltd. (“the Company”) and its subsidiaries at December 31, 2008 and 2009, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2009 in conformity with accounting principles generally accepted in the United States of America. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits. We conducted our audits of these statements in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

/s/ PricewaterhouseCoopers Zhong Tian CPAs Limited Company

Shanghai, the People’s Republic of China

April 9, 2010

 

F-2


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

CONSOLIDATED STATEMENTS OF OPERATIONS

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

        For the year ended 31 December,  
    Notes   2007     2008     2009     2009  
        RMB     RMB     RMB     US$ (Note 2(z))  

Revenue from third parties

    327,781,635      1,551,758,033      1,539,542,277      225,544,218   

Revenue from a related party

  23   381,371,274      631,856,095      28,317,315      4,148,510   
                         

Total revenues

  5   709,152,909      2,183,614,128      1,567,859,592      229,692,728   

Cost of revenues

    (621,023,990   (1,872,088,658   (1,337,647,527   (195,966,470
                         

Gross profit

    88,128,919      311,525,470      230,212,065      33,726,258   

Operating expenses:

         

Selling and marketing

    (1,307,037   (1,167,653   (16,727,975   (2,450,662

General and administrative

    (11,182,409   (38,662,273   (85,114,520   (12,469,348

Research and development

    (50,831   (441,790   (5,896,939   (863,906
                         

Total operating expenses

    (12,540,277   (40,271,716   (107,739,434   (15,783,916
                         

Income from operations

    75,588,642      271,253,754      122,472,631      17,942,342   

Interest expenses, net

    (321,850   (6,323,932   (29,936,782   (4,385,763

Subsidy income

  2(w)   546,771      637,320      8,569,118      1,255,383   

Investment (loss)/gain

  1        (10,165,516   82,063      12,022   

Exchange loss

    (68,025   (4,979,824   (2,181,537   (319,597

Other income/(expenses), net

    300,007      (490,058   (1,338,598   (196,106

Change in fair value of derivatives

  26        (29,812,680   (13,599,301   (1,992,309
                         

Income before income taxes

    76,045,545      220,119,064      84,067,594      12,315,972   

Income tax (expense)/benefit

  6        (822,280   1,342,038      196,610   
                         

Net income

    76,045,545      219,296,784      85,409,632      12,512,582   

Less: Net income attributable to the non-controlling interests

  3        (576,826          
                         

Net income attributable to JinkoSolar Holding Co., Ltd.

    76,045,545      218,719,958      85,409,632      12,512,582   
                         

Series A redeemable convertible preferred shares accretion

  20        (13,747,632   (31,832,994   (4,663,560

Series B redeemable convertible preferred shares accretion

  20        (10,739,483   (42,301,594   (6,197,219

Deemed dividend to a preferred shareholder

  20             (8,015,089   (1,174,217

Allocation to preferred shareholders

         (16,471,759   (40,422,944   (5,921,995
                         

Net income/(loss) attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders

    76,045,545      177,761,084      (37,162,989   (5,444,409
                         

Net income/(loss) attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders per share basic and diluted

  18   2.19      3.52      (0.73   (0.11
                         

Weighted average ordinary shares outstanding

    34,691,800      50,429,700      50,731,450      50,731,450   
                         

The accompanying notes are an integral part of these consolidated financial statements.

 

F-3


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

CONSOLIDATED BALANCE SHEETS

AS OF DECEMBER 31, 2008 AND 2009

 

     Note   December 31,
2008
  December 31,
2009
  December 31,
2009
  December  31,
2009

pro-forma
(Note 30)
  December 31,
2009
pro-forma
(Note 30)
         RMB   RMB  

US$

(Note 2(z))

  RMB
(unaudited)
 

US$

(Note 2(z))

ASSETS             

Current assets:

            

Cash and cash equivalent

   2(d)   27,323,587   152,479,597   22,338,387   152,479,597   22,338,387

Restricted cash

   2(e)   9,662,000   72,827,202   10,669,245   72,827,202   10,669,245

Short-term investments

   7     50,462,300   7,392,769   50,462,300   7,392,769

Accounts receivable, net — a related party

   23   69,062,122   100,382   14,706   100,382   14,706

Accounts receivable, net — third parties

     8,039,510   236,796,628   34,690,902   236,796,628   34,690,902

Notes receivable

   2(f)     13,301,730   1,948,714   13,301,730   1,948,714

Advances to suppliers

   8   110,638,316   93,324,136   13,672,063   93,324,136   13,672,063

Inventories

   9   272,030,481   245,192,398   35,920,890   245,192,398   35,920,890

Deferred tax assets — current

   6     1,342,038   196,610   1,342,038   196,610

Prepayments and other current assets

   10   32,224,382   104,823,993   15,356,802   104,823,993   15,356,802
                      

Total current assets

     528,980,398   970,650,404   142,201,088   970,650,404   142,201,088

Property, plant and equipment, net

   11   352,929,483   741,481,449   108,627,646   741,481,449   108,627,646

Land use rights, net

   12   165,509,635   228,377,510   33,457,494   228,377,510   33,457,494

Intangible assets, net

   13     279,131   40,893   279,131   40,893

Advances to suppliers to be utilized beyond one year

   8   187,270,550   230,899,519   33,826,971   230,899,519   33,826,971

Goodwill

   4     45,645,832   6,687,152   45,645,832   6,687,152

Other assets

   14   43,330,382   25,315,493   3,708,741   25,315,493   3,708,741
                      

Total assets

     1,278,020,448   2,242,649,338   328,549,985   2,242,649,338   328,549,985
                      
LIABILITIES             

Current liabilities:

            

Accounts payable

     23,985,326   99,932,826   14,640,242   99,932,826   14,640,242

Notes payable

   2(f)     81,643,243   11,960,803   81,643,243   11,960,803

Accrued payroll and welfare expenses

     9,535,889   34,989,330   5,125,966   34,989,330   5,125,966

Advances from third party customers

     184,749,026   36,777,776   5,387,975   36,777,776   5,387,975

Other payables and accruals

   15   83,043,005   116,750,050   17,103,979   116,750,050   17,103,979

Other payables due to a related party

   23     550,152   80,598   550,152   80,598

Derivative liabilities

   26   30,017,369   54,938   8,048    

Short-term borrowings from third parties, including current portion of long-term bank borrowings

   16   150,000,000   576,084,026   84,396,787   576,084,026   84,396,787
                      

Total current liabilities

     481,330,615   946,782,341   138,704,398   946,727,403   138,696,350
                      

Non-current liabilities:

            

Long-term borrowings

   16     348,750,000   51,092,164   348,750,000   51,092,164

Guarantee liability

   25     1,500,000   219,751   1,500,000   219,751

Long-term payable for capital lease

   17   3,713,087        

Deferred tax liability

   6     2,779,473   407,195   2,779,473   407,195
                      

Total liabilities

     485,043,702   1,299,811,814   190,423,508   1,299,756,876   190,415,460
                      

 

F-4


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

CONSOLIDATED BALANCE SHEETS — (Continued)

AS OF DECEMBER 31, 2008 AND 2009

 

     Note   December 31,
2008
  December 31,
2009
  December 31,
2009
  December  31,
2009

pro-forma
(Note 30)
  December 31,
2009
pro-forma
(Note 30)
         RMB   RMB  

US$

(Note 2(z))

  RMB
(unaudited)
 

US$

(Note 2(z))

Commitments and contingencies

   25          

Series A Redeemable Convertible Preferred Shares (US$0.00002 par value, 5,375,150 shares authorized; 5,375,150 and 5,375,150 shares issued and outstanding as of December 31, 2008 and 2009, respectively; none outstanding on a pro-forma basis as of December 31, 2009; liquidation preference of RMB245,815,200 as of December 31, 2009)

   20   157,224,946   189,057,940   27,697,145    

Series B Redeemable Convertible Preferred Shares (US$0.00002 par value, 7,441,450 shares authorized; 7,441,450 and 7,441,450 shares issued and outstanding as of December 31, 2008 and 2009, respectively; none outstanding on a pro-forma basis as of December 31, 2009; liquidation preference of RMB360,528,960 as of December 31, 2009)

   20   245,402,237   287,703,831   42,148,849    
                      

Equity

            

Ordinary shares (US$0.00002 par value, 487,183,400 shares authorized; 50,731,450 and 50,731,450 shares issued and outstanding as of December 31, 2008 and 2009, respectively; 63,587,850 outstanding on a pro-forma basis as of December 31, 2009)

   21   7,809   7,809   1,144   9,566   1,401

Additional paid-in capital

     121,463,257   193,929,492   28,410,831   670,689,506   98,256,568

Statutory reserves

   2(x)   25,825,125   38,434,698   5,630,715   38,434,698   5,630,715

Retained earnings

     243,053,372   233,703,754   34,237,793   233,758,692   34,245,841
                      

Total JinkoSolar Holding Co., Ltd. shareholders’ equity

     390,349,563   466,075,753   68,280,483   942,892,462   138,134,525
                      

Total equity

     390,349,563   466,075,753   68,280,483   942,892,462   138,134,525
                      

Total liabilities and equity

     1,278,020,448   2,242,649,338   328,549,985   2,242,649,338   328,549,985
                      

The accompanying notes are an integral part of these consolidated financial statements.

 

F-5


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

CONSOLIDATED STATEMENTS OF CHANGES IN EQUITY

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

        JinkoSolar Holding Co., Ltd shareholders’ equity              
    Notes   Ordinary Shares   Additional
paid in
capital
    (Accumulated
deficit)/
Retained
earnings
    Statutory
reserves
    Non-controlling
interests
    Total equity  
      Number of
shares
  Par value          
            RMB   RMB     RMB     RMB     RMB     RMB  

Balance as of January 1, 2007

    12,500,000   1,967   7,075,476      (1,369,891        5,940,073      11,647,625   

Issuance of ordinary shares

  21   37,500,000   5,740   97,192,755                     97,198,495   

Capital injection to VIEs by VIEs shareholders

                       8,000,000      8,000,000   

Reclassification of paid-in capital in Desun upon inception

  1       (4,000,000                  (4,000,000

Additional capital contribution by the Shareholders

        802,267                     802,267   

Disposal of a subsidiary

                       (3,000,000   (3,000,000

Net income attributable to JinkoSolar Co., Ltd.

             76,045,545                76,045,545   
                                       

Balance as of December 31, 2007

    50,000,000   7,707   101,070,498      74,675,654           10,940,073      186,693,932   
                                       

Issuance of ordinary shares to a consultant

  21   731,450   102   20,004,763                     20,004,865   

Appropriation to statutory reserves of Desun

  2(x)            (30,000   30,000             

Disposal of a subsidiary

                  (30,000        (30,000

Deconsolidation of VIEs

  3       387,996                (11,516,899   (11,128,903

Series A Redeemable Convertible Preferred Shares accretion

  20            (13,747,632             (13,747,632

Series B Redeemable Convertible Preferred Shares accretion

  20            (10,739,483             (10,739,483

Appropriation to statutory reserve of Jiangxi Jinko

  2(x)            (25,825,125   25,825,125             

Net income attributable to JinkoSolar Co., Ltd.

             218,719,958           576,826      219,296,784   
                                       

Balance as of December 31, 2008

    50,731,450   7,809   121,463,257      243,053,372      25,825,125           390,349,563   
                                       

Series A Redeemable Convertible Preferred Shares accretion

             (31,832,994             (31,832,994

Series B Redeemable Convertible Preferred Shares accretion

             (42,301,594             (42,301,594

Deemed dividend to a preferred shareholder

  20       8,015,089      (8,015,089               

Contribution from the Shareholders in the form of ordinary shares

  20       43,561,732                     43,561,732   

Non-cash compensation to ordinary shareholders/employees

  20       20,889,414                     20,889,414   

Net income attributable to JinkoSolar Co., Ltd.

             85,409,632                85,409,632   

Appropriation to statutory reserves of Jiangxi Jinko

             (12,609,573   12,609,573             
                                       

Balance as of December 31, 2009

    50,731,450   7,809   193,929,492      233,703,754      38,434,698           466,075,753   
                                       

Balance as of December 31, 2009 US$ (Note 2(z))

    50,731,450   1,144   28,410,831      34,237,793      5,630,715           68,280,483   
                                       

The accompanying notes are an integral part of these consolidated financial statements.

 

F-6


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

CONSOLIDATED STATEMENTS OF CASH FLOWS

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

    For the year ended December 31,  
    2007     2008     2009     2009  
    RMB     RMB     RMB    

US$

(Note 2(z))

 

Cash flows from operating activities:

       

Net income attributable to JinkoSolar Co., Ltd.

  76,045,545      218,719,958      85,409,632      12,512,582   

Adjustments to reconcile net income to net cash used in operating activities:

       

Change in fair value of derivatives (Note 26)

       29,812,680      13,599,301      1,992,309   

Change in deferred tax assets

            (1,342,038   (196,610

Non-cash compensation to ordinary shareholders/employees (Note 20)

            20,889,414      3,060,316   

Depreciation of property, plant and equipment

  1,545,255      12,824,606      43,840,980      6,422,740   

Amortization of land use rights

  73,846      2,719,654      2,245,016      328,897   

Amortization of intangible assets

            4,130      605   

Amortization of deferred financing cost

            250,000      36,625   

Inventory provision

       5,244,729      11,422,243      1,673,368   

Provision for impairment of accounts receivable

            2,800,000      410,203   

Provision for impairment of other receivable

            4,000,000      586,003   

Non-controlling interest

       576,826             

Investment loss/(income)

       10,165,516      (82,063   (12,022

Exchange loss

  68,025      4,979,824      2,181,537      319,597   

Changes in operating assets and liabilities:

       

Increase in accounts receivable

  (228,368   (90,427,849   (143,616,567   (21,039,946

Increase in notes receivable

            (13,301,730   (1,948,714

(Increase)/decrease in advances to suppliers

  (118,737,151   (222,423,056   3,107,915      455,312   

(Increase)/decrease in inventories

  (162,655,366   (249,181,987   46,504,747      6,812,984   

Decrease in other receivables from related parties

  5,801,885      48,511,160             

Increase in prepayments and other current assets

  (28,377,614   (6,913,263   (76,817,335   (11,253,803

Increase in accounts payable

  10,675,039      17,612,737      66,469,936      9,737,901   

Increase in accrued payroll and welfare expenses

  4,853,747      10,203,689      21,217,295      3,108,351   

Increase/(decrease) in advances from a related party

  42,622,633      (92,433,279          

Increase/(decrease) in advances from third party customers

  162,001,820      22,747,259      (139,608,876   (20,452,816

Increase/(decrease) in other payables and accruals

  9,852,118      33,432,303      (25,470,359   (3,731,429
                       

Net cash provided by/(used in) operating activities

  3,541,414      (243,828,493   (76,296,822   (11,177,547
                       

Cash flows from investing activities:

       

(Increase)/Decrease in restricted cash for purchase of machinery and equipment

       (9,662,000   2,046,420      299,802   

Purchase of property, plant and equipment

  (84,787,640   (319,194,825   (242,770,774   (35,566,119

Purchase of land use rights

  (69,320,915   (98,924,588   (42,500,610   (6,226,375

Purchase of intangible assets

            (283,261   (41,498

Cash paid for short-term investment

            (50,400,000   (7,383,642

Net cash paid for acquisition of a subsidiary

            (69,248,833   (10,145,011

Cash outflow from deconsolidation of VIEs

       (13,273,389          

Cash received from third party for disposal of investment in subsidiaries

  4,484,990      34,102,500             

Cash received for disposal of investment in a subsidiary

       57,849,277             

Loan to a related party

  (17,000,000               

Repayment of loan from a related party

       17,000,000             

Loan to third parties

  (1,350,000   (3,000,000          

Repayment of loan by a third party

       1,350,000      3,000,000      439,502   
                       

Net cash used in investing activities

  (167,973,565   (333,753,025   (400,157,058   (58,623,341
                       

 

F-7


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

CONSOLIDATED STATEMENTS OF CASH FLOWS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

    For the year ended December 31,  
    2007     2008     2009     2009  
    RMB     RMB     RMB     US$
(Note 2(z))
 

Cash flows from financing activities:

       

Proceeds from issuance of ordinary shares

  97,198,495                  

Capital injection to Desun by the Shareholders

  48,385,952                  

Capital injection to a subsidiary from a non-controlling shareholder

  3,000,000                  

Capital injection to VIEs by VIEs shareholders

  5,000,000      10,817,503             

Net proceeds from issuance of Series A Redeemable Convertible Preferred Shares

       163,482,179             

Net proceeds from issuance of Series B Redeemable Convertible Preferred Shares

       235,367,443             

Cash paid for capital lease

       (7,982,062   (7,541,257   (1,104,800

Cash received from borrowings from related parties

  9,237,030      2,402,773             

Repayment of borrowings to related parties

  (1,562,673   (10,077,130          

Borrowings from third parties

  22,990,000      298,722,228      1,294,956,061      189,712,135   

Repayment of borrowings to third parties

  (1,000,000   (111,212,228   (681,692,735   (99,868,550

Increase in cash restricted for notes payable (Note 2(f))

            (43,986,784   (6,444,100

Increase in notes payable (Note 2(f))

            39,553,566      5,794,630   
                       

Net cash provided by financing activities

  183,248,804      581,520,706      601,288,851      88,089,315   
                       

Effect of foreign exchange rate changes on cash

  (82,484   (3,857,792   321,039      47,032   
                       

Net increase in cash and cash equivalent

  18,734,169      81,396      125,156,010      18,335,459   

Cash and cash equivalent, beginning of year

  8,508,022      27,242,191      27,323,587      4,002,928   
                       

Cash and cash equivalent, end of year

  27,242,191      27,323,587      152,479,597      22,338,387   
                       

Supplemental disclosure of cash flow information

       

Cash paid for income tax

       217,528             

Cash paid for interest expenses

  275,770      6,014,161      30,195,110      4,423,609   

Supplemental disclosure of non-cash investing and financing cash flow information

       

Purchases of property, plant and equipment included in other payables

       28,290,613      91,387,236      13,388,306   

Payable under capital lease

       11,233,443      3,744,481      548,570   

Ordinary shares issued to consultant in connection with the issuance of Series A Redeemable Convertible Preferred Shares

       20,004,865             

Unpaid Series B Redeemable Convertible Preferred Shares issuance cost

       500,000             

The accompanying notes are an integral part of these consolidated financial statements.

 

F-8


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

1. ORGANIZATION AND NATURE OF OPERATIONS

The accompanying consolidated financial statements include the financial statements of JinkoSolar Holding Co., Ltd. (the “Company”), its subsidiaries, which include Paker Technology Limited (“Paker”), Jiangxi Desun Energy Co., Ltd. (“Desun”) and Jinko Solar Co., Ltd. (“Jiangxi Jinko”, formerly known as Jiangxi Kinko Energy Co., Ltd., Jiangxi Jinko Energy Co., Ltd. or Jiangxi Jinko Solar Co., Ltd.), the subsidiary of Paker, JinkoSolar International Limited (“JinkoSolar International”), the subsidiaries of Jiangxi Jinko, Zhejiang Jinko Solar Co., Ltd. (“Zhejiang Jinko”, formerly known as Zhejiang Sun Valley Energy Application Technology Co., Ltd.), Jinko Solar Import and Export Co., Ltd. (“Jinko Import and Export”, formerly known as Shangrao Jinko Solar Import and Export Co., Ltd.) and Shangrao Xinwei Industry Co., Ltd. (“Xinwei”), and certain variable interest entities (“VIEs” or “VIE subsidiaries”), which include Shangrao Yangfan Electronic Materials Co., Ltd. (“Yangfan”, formerly known as Shangrao Zhongcheng Semiconductor Materials Co., Ltd.), Shangrao Tiansheng Semiconductor Materials Co., Ltd. (“Tiansheng”), Shangrao Hexing Enterprise Co., Ltd. (“Hexing”) and Shanghai Alvagen International Trading Co., Ltd. (“Alvagen”). The Company, its subsidiaries and VIE subsidiaries are collectively referred to as the “Group”.

Paker was incorporated in Hong Kong as a limited liability company on November 10, 2006 by a Hong Kong citizen and a citizen of People’s Republic of China (“the PRC”), who held the investment on behalf of three PRC shareholders (the “Shareholders”) via a series of entrustment agreements.

The Company was incorporated in the Cayman Islands on August 3, 2007. On December 16, 2008, all of the then existing shareholders of Paker exchanged their respective shares of Paker for equivalent classes of shares of the Company (the “Share Exchange”). As a result, Paker became a wholly-owned subsidiary of the Company.

The immediate family members of the Shareholders established Desun on behalf of the Shareholders on June 6, 2006 in Shangrao, Jiangxi province, the PRC. In January 2007 the shares were transferred to the Shareholders of the Company. From February 28, 2007 to August 9, 2007, Paker entered into various agreements with Desun under which Paker injected capital into Desun. Upon the completion of the capital injections, the Shareholders owned 72.98% of Desun, Paker owned the remaining 27.02% and Desun became a foreign invested enterprise. In addition, on February 27, 2007, the Shareholders executed an agreement whereby they pledged their shares and beneficial interest (“Share Pledge Agreement”) in Desun to Paker. As a result, Paker obtained 100% voting control and economic interest of Desun (“Reorganization”). However, the Shareholders continued to have legal ownership of the paid-in capital of Desun as the Share Pledge Agreement did not transfer the legal title of the pledged shares to Paker under PRC law. Accordingly, the paid-in capital of Desun amounted to RMB4,000,000 at inception, which was recorded as additional paid in capital prior to February 27, 2007, was reclassified as long-term payable to Shareholders. Additional paid-in capital and capital surplus of Desun contributed by the Shareholders during the year ended December 31, 2007 subsequent to the Share Pledge Agreement amounting to RMB57,663,685 were also presented as long-term payable to Shareholders.

The Reorganization and the Share Exchange were accounted for as legal reorganization of entities under common control, in a manner similar to pooling of interest. Accordingly, the accompanying consolidated financial statements were prepared as if the current corporate structure had been in existence from the inception of Desun.

On December 13, 2006, Paker established Jiangxi Jinko as a wholly foreign owned enterprise in Shangrao, Jiangxi province, the PRC.

For the periods presented, Desun and Jiangxi Jinko are principally engaged in manufacturing, processing and sale of polycrystalline and monocrystalline silicon ingots and wafers and related silicon materials in the PRC. The businesses conducted by Desun were migrated over the first half of 2008 to Jiangxi Jinko.

 

F-9


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

On July 28, 2008, Paker disposed its 27.02% investment in Desun to a third party and recorded an investment loss of RMB10,165,516. Concurrently with the disposal, the Shareholders and Paker terminated the Share Pledge Agreement. The disposal and the termination of the Share Pledge Agreement were both approved by the local authorities on July 28, 2008. Consequently, the Group deconsolidated Desun as of July 28, 2008.

Xinwei was established on July 16, 2007 by Jiangxi Jinko and a PRC citizen with total registered capital of RMB7.5 million. Jiangxi Jinko and the individual held equity interest of 60% and 40%, respectively. Xinwei manufactures and provides ceramic crucibles to Desun and Jiangxi Jinko. On December 24, 2007, Jiangxi Jinko entered into a share transfer agreement with another unrelated PRC citizen to sell its 60% shareholding to this individual for a total consideration of RMB4.5 million which approximated book value of Jiangxi Jinko’s investment in Xinwei. The share transfer was completed on December 28, 2007.

Yangfan was established on April 24, 2006 by two PRC citizens, one of which was an employee of Desun. Yangfan’s registered capital was RMB3 million as of December 31, 2007. Yangfan procured and sold raw materials for manufacturing to Desun and Jiangxi Jinko. On January 14, 2008, the shareholders of Yangfan entered into share transfer agreements with an unrelated PRC citizen to sell all equity shares in Yangfan to this individual, for a total consideration of RMB3 million. The share transfer transaction was completed on January 29, 2008.

Tiansheng was established on December 3, 2004 by two PRC individuals. On December 18, 2006, Tiansheng was acquired by one of the Shareholders of Paker who is also the Company’s CEO. Tiansheng’s registered capital was RMB3 million as of December 31, 2007. Tiansheng procures and sells raw materials for manufacturing to Desun and Jiangxi Jinko. On November 12, 2007, the Company’s CEO entered into a share transfer agreement with an unrelated PRC citizen to sell all of his shareholdings to this individual for a total consideration of RMB3 million. The share transfer was completed on November 27, 2007.

Hexing was established in September 2007 by two PRC citizens with total registered capital of RMB8 million. Hexing processes and sells to Desun and Jiangxi Jinko raw materials used for manufacturing of silicon products.

Alvagen was established on April 29, 2007 by a PRC citizen who is a family member of the Company’s CEO. The registered capital for Alvagen is RMB1 million. Alvagen primarily provided administrative supportive services for the Group.

The financial statements of the VIEs were consolidated into the Company beginning on the date that the Company became the primary beneficiary of the VIEs. They were deconsolidated in September 2008 when the Company ceased to be the primary beneficiary of Yangfan and Alvagen, and when Hexing and Tiansheng were no longer VIEs (Note 3).

In June 2009, the Group acquired 100% equity interest in Zhejiang Jinko for a total consideration of RMB100 million. The acquisition was consummated on June 30, 2009. Consequently, the Group consolidated the financial statements of Zhejiang Jinko starting from June 30, 2009. Zhejiang Jinko is a solar cell manufacturer which was also one of Jiangxi Jinko’s major solar wafer customers before the acquisition.

On November 25, 2009, Paker established JinkoSolar International, a trading company incorporated in Hong Kong, to facilitate settlement of payments and the Group’s overseas sales and marketing efforts in future.

On December 24, 2009, Jiangxi Jinko established Jinko Import and Export and accordingly Jinko Import and Export became a solely owned subsidiary of Jiangxi Jinko. Jinko Import and Export was established to facilitate the Company’s future import and export activities in the PRC.

 

F-10


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

JinkoSolar International and Jinko Import and Export had not started operations as of December 31, 2009.

 

2. PRINCIPAL ACCOUNTING POLICIES

a. Basis of presentation and use of estimates

The accompanying consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“US GAAP”). Significant accounting policies followed by the Group in the preparation of its accompanying consolidated financial statements are summarized below.

The preparation of financial statements in conformity with US GAAP requires management to make estimates and assumptions that affect the amounts reported in the accompanying consolidated financial statements and related disclosures. Actual results could materially differ from these estimates.

b. Consolidation

The consolidated financial statements include the financial statements of the Company, its subsidiaries and VIE subsidiaries for which the Company is the primary beneficiary. All significant transactions and balances among the Company, its subsidiaries and VIE subsidiaries have been eliminated upon consolidation.

A subsidiary is an entity in which the Company, directly or indirectly, controls more than one half of the voting power; has the power to appoint or remove the majority of the members of the board of directors; to cast majority of votes at the meeting of the board of directors or to govern the financial and operating policies of the investee under a statute or agreement among the shareholders or equity holders

The Company applies guidance that requires certain VIEs to be consolidated by the primary beneficiary of the entity if the equity investors in the entity do not have the characteristics of a controlling financial interest or do not have sufficient equity at risk for the entity to finance its activities without additional subordinated financial support from other parties.

c. Foreign currency translation

The Group’s reporting and functional currency is the Renminbi (“RMB”), the official currency in the PRC. Transactions denominated in currencies other than the functional currency are translated into the functional currency at the exchange rates quoted by the People’s Bank of China (the “PBOC”) prevailing at the dates of the transactions. Gains and losses resulting from foreign currency transactions are included in the consolidated statements of operations. Monetary assets and liabilities denominated in foreign currencies are translated into RMB using the applicable exchange rates quoted by the PBOC at the applicable balance sheet dates. All such exchange gains or losses are included in exchange loss in the consolidated statements of operations.

d. Cash and cash equivalent

Cash and cash equivalent represent cash on hand and demand deposits placed with banks or other financial institutions, which have original maturities of three months or less.

 

F-11


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

e. Restricted cash

Restricted cash represents deposits legally held by a bank which are not available for the Group’s general use. These deposits, generally mature within six months, are held as collateral for issuance of letters of credit and bank acceptance notes to vendors for purchase of machinery and equipment and raw materials.

f. Notes receivable and payable

The Group accepts bank acceptance notes from customers in China in the normal course of business. The Group may discount these notes with banks in China or endorse these notes with its suppliers to clear its accounts payable. Notes that have been discounted with banks or endorsed with suppliers are derecognized from the consolidated balance sheets when the criteria for sale treatment are met.

The Group also issues bank acceptance notes to its suppliers in China in the normal course of business. The Group classified the changes in notes payable and the restricted cash held as collateral for issuance of bank acceptance notes as financing activities.

Notes receivable and payable are typically non-interest bearing and have maturities of less than six months.

g. Accounts receivable

Accounts receivable are presented net of allowance for doubtful accounts. The Group provides specific provisions for bad debts when facts and circumstances indicate that the collection is doubtful and a loss is probable and estimable. If the financial conditions of its customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. As of December 31, 2008, the Group did not record any allowance for doubtful accounts. The Group made an allowance for doubtful accounts of RMB2,800,000 as of December 31, 2009. For the years presented, the Group did not write off any bad debts.

h. Inventories

Inventories are stated at the lower of cost or market. Cost is determined using the weighted average method. Provisions are made for excess, slow moving and obsolete inventories as well as for inventories with carrying values in excess of market. Provisions for inventories valuation were RMB5,244,729 and RMB11,422,243 for the years ended December 31, 2008 and 2009, respectively.

In addition, the Company analyzes its firm purchase commitments, which currently consist primarily of the long-term fixed price polysilicon supplier agreement, at each period end. Provision is made in the current period when the anticipated inventory cost from future execution of such supplier agreement is in excess of market.

i. Property, plant and equipment

Property, plant and equipment are stated at cost less accumulated depreciation. Depreciation is computed using the straight-line method over the following estimated useful lives:

 

Buildings

   20 years

Machinery and equipment

   10 years

Furniture, fixture and office equipment

   3~5 years

Motor vehicles

   4~5 years

Construction in progress primarily represents the construction of new buildings. Costs incurred in the construction are capitalized and transferred to property and equipment upon completion, at which time depreciation commences. Interest costs are capitalized for qualifying assets. Interest costs capitalized for the years ended December 31, 2008 and 2009 were nil and RMB193,124, respectively.

 

F-12


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

The cost of maintenance and repairs is charged to expense as incurred. Expenditures that increase the value or productive capacity of assets are capitalized. Upon retirement or other disposition of property, plant and equipment, the cost and related accumulated depreciation are removed from the accounts and any gain or loss is included in operations.

j. Land use rights

Land use rights represent fees paid to obtain the right to use land in the PRC. Amortization is computed using the straight-line method over the terms specified in land use right certificates of 50 years or 70 years, as applicable.

k. Intangible assets

Intangible assets include purchase software and fees paid to register trademarks and are amortized on a straight-line basis over their estimated useful lives, which are 5 and 10 years, respectively.

l. Business combination and goodwill

The Group accounts for business combination using the purchase method of accounting. This method requires that the acquisition cost to be allocated to the assets, including separately identifiable intangible assets, and the liabilities that the Group acquires based on their estimated fair values. The Group makes estimates and judgments in determining the fair value of the acquired assets and liabilities based on its experience with similar assets and liabilities in similar industries. If different judgments or assumptions were used, the amounts assigned to the individual acquired assets or liabilities could be materially different.

Goodwill represents the excess of the purchase price over the full fair value of the identifiable assets and liabilities of the acquired business. In a business acquisition, any acquired intangible assets that do not meet separate recognition criteria are recognized as goodwill.

No amortization is recorded for goodwill. The Group operates and manages its business in a single segment and the single segment is its reporting unit for the purpose of goodwill impairment testing. The Company tests goodwill on an annual basis or more frequently if an event occurs or circumstances change that could more likely than not reduce the fair value of the goodwill below its carrying amount. The impairment of goodwill is determined by estimating the fair value based upon the present value of future cash flows. In estimating the future cash flows, the Company takes into consideration the overall and industry economic conditions and trends, market risk of the Company and historical information. No impairment loss was recorded for all periods presented.

m. Impairment of long-lived assets

Long-lived assets are reviewed for impairment whenever events or changes in circumstances indicate that carrying amount of an asset may not be recoverable. The Group may recognize impairment of long-lived assets in the event the net book value of such assets exceeds the future undiscounted cash flows attributable to these assets. If the total of the expected undiscounted future net cash flows is less than the carrying amount of the asset, a loss, if any, is recognized for the difference between the fair value of the asset and its carrying value. No impairment of long-lived assets was recognized for all periods presented.

 

F-13


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

n. Leases

Leases where substantially all the rewards and risks of ownership of assets remain with the leasing company are accounted for as operating leases. Other leases are accounted for as capital leases. Payments made under operating leases are charged to the statements of operations on a straight-line basis over the lease periods.

o. Revenue recognition

Revenues represent the invoiced value of products sold, net of value added taxes (“VAT”). The Group offers to its customers the right to return or exchange defective products within a prescribed period if the volume of the defective products exceeds a certain percentage of the shipment as specified in the individual sales contract. Actual returns were nil, 0.2% and 0.1% of total sales for the years ended December 31, 2007, 2008 and 2009, respectively. Revenue from the sale of silicon ingot, solar wafer, solar cell, solar module and other silicon materials is generally recognized when the products are delivered and the title is transferred, the risks and rewards of ownership have been transferred to the customer, the price is fixed and determinable and collection of the related receivable is reasonably assured. In the case of sales that are contingent upon customer acceptance, revenue is not recognized until the deliveries are formally accepted by the customers.

The Group recognizes revenue for processing services when the services are completed, which is generally evidenced by delivery of processed products to the customers.

Part of the Group’s sales to customers requires the customers to prepay before delivery has occurred. Such prepayments are recorded as advances from customers in the Company’s consolidated financial statements, until the above criteria have been met.

In the PRC, VAT of 17% on invoiced amount is collected in respect of sales of goods on behalf of the tax authorities. VAT collected from customers, net of VAT paid for purchases, is recorded as a tax payable in the consolidated balance sheet until it is paid to the authorities.

p. Warranty cost

Solar modules produced by the Group are typically sold with either a 2-year or 5-year warranty for product defects and a 10-year and 25-year warranty against declines of more than 10.0% and 20.0%, respectively, from the initial minimum power generation capacity at the time of delivery. Therefore, the Group is exposed to potential liabilities that could arise from these warranties. The potential liability is generally in the form of product replacement or repair.

The Group began the sales of solar modules in the first half of 2009 and has not experienced any material warranty claims to-date in connection with declines in the power generation capacity of its solar modules or defects. The provision for warranty cost as of December 31, 2009 was RMB1,727,717.

q. Financial guarantees

The Group issues guarantees in favor of certain third parties. A guarantee requires the issuer to make payments to reimburse the holder for a loss it incurs when a specified debtor fails to make repayments to the holder, when the debtor’s liability to the holder falls due.

A guarantee is initially recognized at the estimated fair value in the Group’s consolidated balance sheets unless it becomes probable that the Group will reimburse the holder of the guarantee for an amount higher than

 

F-14


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

the carrying amount, in which case the guarantee is carried in the Group’s consolidated balance sheets at the expected amount payable to the holder. The guarantee is derecognized when the Group’s obligation to the holder expires.

r. Shipping and handling

Costs to ship products to customers are included in selling and marketing expenses in the consolidated statements of operations. Costs to ship products to customers were RMB486,681, RMB528,349 and RMB1,632,428 for the years ended December 31, 2007, 2008 and 2009, respectively.

s. Research and development

Research and development costs are expensed when incurred.

t. Start-up costs

The Group expensed all costs incurred in connection with start-up activities.

u. Fair value of financial instruments

The Company adopted the provisions of the fair value measurement guidance on January 1, 2008 for financial assets and liabilities. On January 1, 2009, the Company also adopted the same guidance for all non-financial assets and non-financial liabilities. The Company does not have any non-financial assets or liabilities that are recognized or disclosed at fair value in the financial statements on a recurring basis. Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date (also referred to as an exit price). A hierarchy is established for inputs used in measuring fair value that gives the highest priority to observable inputs and the lowest priority to unobservable inputs. Valuation techniques used to measure fair value shall maximize the use of observable inputs. The implementation of the fair value measurement guidance did not result in any material changes to the carrying values of the Company’s financial instruments on the opening balance sheet on January 1, 2008 and 2009.

When available, the Company measures the fair value of financial instruments based on quoted market prices in active markets, valuation techniques that use observable market-based inputs or unobservable inputs that are corroborated by market data. Pricing information the Company obtains from third parties is internally validated for reasonableness prior to use in the consolidated financial statements. When observable market prices are not readily available, the Company generally estimates the fair value using valuation techniques that rely on alternate market data or inputs that are generally less readily observable from objective sources and are estimated based on pertinent information available at the time of the applicable reporting periods. In certain cases, fair values are not subject to precise quantification or verification and may fluctuate as economic and market factors vary and the Company’s evaluation of those factors changes. Although the Company uses its best judgment in estimating the fair value of these financial instruments, there are inherent limitations in any estimation technique. In these cases, a minor change in an assumption could result in a significant change in its estimate of fair value, thereby increasing or decreasing the amounts of the Company’s consolidated assets, liabilities, equity and net (loss) or income.

The Company’s financial instruments consist principally of cash and cash equivalent, accounts and notes receivable, prepayments and other current assets, short-term investments, restricted cash, accounts and notes

 

F-15


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

payable, other payables, short-term borrowings, long-term payables relating to capital lease and embedded derivative underlying the Series B Redeemable Convertible Preferred Shares. As of December 31, 2007, 2008 and 2009, the carrying values of these financial instruments approximated their fair values, with the exception of the embedded derivatives underlying the Series B Redeemable Convertible Preferred Shares and short-term investments (Note 26).

v. Taxation

Deferred income taxes are provided using the asset and liability method. Under this method, deferred income taxes are recognized for the tax consequences of temporary differences by applying enacted statutory rates applicable to future years to differentiate between the financial statement carrying amounts and the tax bases of existing assets and liabilities. The tax base of an asset or liability is the amount attributed to that asset or liability for tax purposes. The effect on deferred taxes of a change in tax rates is recognized in the statement of operations in the period of change. A valuation allowance is provided to reduce the amount of deferred tax assets if it is considered more likely than not that some portion or all of the deferred tax assets will not be realized.

w. Subsidy income

Financial subsidy is recognized as subsidy income when received. For the years ended December 31, 2007, 2008 and 2009, the Group received financial subsidies of RMB546,771, RMB637,320 and RMB8,569,118 from the local PRC government authority, respectively. Financial subsidies for the year ended December 31, 2009 included those grants received for our expansion of production scale, technology upgrades and development of export markets. These subsidies were non-recurring, not refundable and with no conditions, including none related to specific use or disposition of the funds, attached. Such amounts were recorded as subsidy income in the consolidated statements of operations. There are no defined rules and regulations to govern the criteria necessary for companies to enjoy such benefits and the amount of financial subsidy is determined at the discretion of the relevant government authority.

x. Statutory reserves

Desun and Zhejiang Jinko, as sino-foreign owned joint ventures incorporated in the PRC, are required to make appropriations of net profits, after recovery of accumulated deficit, to (i) a general reserve fund, (ii) an enterprise expansion fund, and (iii) a staff bonus and welfare fund prior to distribution of dividends to investors. These reserve funds are set at certain percentage of after-tax profit determined in accordance with PRC accounting standards and regulations (the “PRC GAAP”). The percentage of net profit for appropriation to these funds is at the discretion of their board of directors.

Jiangxi Jinko, as a wholly foreign owned enterprise incorporated in the PRC, is required on an annual basis to make appropriations of net profits, after the recovery of accumulated deficit, to a general reserve fund and a staff bonus and welfare fund. These reserve funds are set at certain percentage of after-tax profit determined in accordance with the PRC GAAP. The percentage of the appropriation for general reserve fund is at least 10%, and the percentage of the appropriation for staff bonus and welfare fund is at the discretion of its boards of directors.

Xinwei, Yangfan, Tiansheng, Hexing, Alvagen and Jinko Import and Export, as domestic enterprises incorporated in the PRC, are required on an annual basis to make an appropriation of net profits, after the recovery of accumulated deficit, to a statutory reserve fund. The statutory reserve fund is set at the percentage of not lower than 10% of the after-tax profit determined in accordance with the PRC GAAP.

Once the level of the general reserve fund and the statutory reserve fund reach 50% of the registered capital of the underlying entities, further appropriations to these funds are discretionary. The Group’s statutory reserves

 

F-16


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

can only be used for specific purposes of enterprises expansion and staff bonus and welfare, and are not distributable to the shareholders except in the event of liquidation. Appropriations to these funds are accounted for as transfers from retained earnings to the statutory reserves.

During the year ended December 31, 2007, no appropriation was made to the above statutory reserves. On July 31, 2008, Desun made an appropriation of RMB30,000 to statutory reserves pursuant to the resolution by its board of directors. For the years ended December 31, 2008 and 2009, Jiangxi Jinko made an appropriation of RMB25,825,125 and RMB12,609,573 to statutory reserves, respectively, pursuant to the resolutions by its board of directors.

y. Dividends

Dividends are recorded when declared. No dividends were declared for the years ended December 31, 2007, 2008 and 2009, respectively.

PRC regulations currently permit payment of dividends only out of accumulated profits as determined in accordance with PRC GAAP. The Company’s PRC subsidiaries can only distribute dividends after they have met the PRC requirements for appropriation to statutory reserves (Note 2(x)).

z. Convenience translation

Translations of amounts from RMB into United States dollars (“US$”) are solely for the convenience of readers and these were calculated at the rate of RMB6.8259 to US$1.00, the noon buying rate in effect on December 31, 2009, as set forth in the H.10 statistical release of the Federal Reserve Board. No representation is intended to imply that the RMB amounts could have been, or could be, converted, realized or settled into US$ at that rate on December 31, 2009, or at any other rate.

aa. Segment reporting

The Group operates and manages its business as a single segment primarily in China.

ab. Earning per share

Basic earnings per share is computed by dividing net income attributable to ordinary shareholders by the weighted average number of ordinary shares outstanding during the period using the two-class method. Under the two-class method, net income is allocated between ordinary shares and other participating securities based on their participating rights. Diluted earnings per share is calculated by dividing net income attributable to ordinary shareholders, as adjusted for the effect of dilutive ordinary equivalent shares, if any, by the weighted average number of ordinary and dilutive ordinary equivalent shares outstanding during the period. Ordinary equivalent shares consist of ordinary shares issuable upon the conversion of the convertible preferred shares using the if-converted method.

ac. Recent accounting pronouncements

In June 2009, the FASB revised the existing guidance on the accounting for transfers and servicing of financial assets and extinguishments of liabilities. The revision requires more information about transfers of financial assets, including securitization transactions, and where entities have continuing exposure to the risks

 

F-17


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

related to transferred financial assets. It eliminates the concept of a “qualifying special- purpose entity,” changes the requirements for derecognizing financial assets, and requires additional disclosures. The revision will be effective at the start of a reporting entity’s first fiscal year beginning after November 15, 2009. The Company does not believe the adoption of this revision to the existing guidance on the accounting for transfers and servicing of financial assets and extinguishments of liabilities will have a material impact on the consolidated financial statements.

In June 2009, the FASB issued a revision to the existing guidance on consolidation of variable interest entities, which requires an analysis to determine whether a variable interest gives the entity a controlling financial interest in a variable interest entity. This statement requires an ongoing reassessment and eliminates the quantitative approach previously required for determining whether an entity is the primary beneficiary. The new guidance will be effective at the start of a reporting entity’s first fiscal year beginning after November 15, 2009. The Company does not believe the adoption of the revised standard on the consolidation of variable interest entities will have a material impact on the consolidated financial statements.

 

3. VARIABLE INTEREST ENTITIES

Variable interests are contractual, ownership or other interests in an entity that change with changes in the entity’s net asset value. Variable interests in an entity may arise from financial instruments, service contracts, guarantees, leases, or other arrangements with the VIE. An entity that will absorb a majority of the expected losses of the VIEs if they occur, or receive a majority of the expected residual returns of the VIEs if they occur, or both, is considered the primary beneficiary of the VIE. The primary beneficiary must include the assets, liabilities and results of operations of the VIEs in its consolidated financial statements.

Tiansheng, Hexing and Yangfan are engaged in procurement and processing of raw materials for Desun and Jiangxi Jinko. Alvagen primarily provided administrative support services for the Group. For the periods presented, Desun and Jiangxi Jinko were the sole or predominant customers of Tiansheng, Hexing and Yangfan. For each of these three entities, the revenue earned from Desun and Jiangxi Jinko varied, depending on the results and activities of Tiansheng, Hexing and Yangfan. Alvagen bore certain general and administrative expenses on behalf of the Group. The Company analyzed its economic and business relationships with these variable interest entities and determined that for the relevant periods discussed below, the Company was the primary beneficiary of Tiansheng, Hexing, Yangfan and Alvagen. The shareholders of the VIEs maintained their equity interest to the extent of the contributed registered capital amounts. As a result of such determination, the results of operations and financial positions of Tiansheng, Hexing, Yangfan and Alvagen were included in the accompanying consolidated financial statements for the periods presented through the dates of deconsolidation as described below.

Commencing from August 2008, a series of actions were taken by the Group and the shareholders of the VIEs that changed the economic and business relationships between the Company and the VIEs. As a result of the changes made, the Company concluded that as of September 1, 2008, the Company was no longer the primary beneficiary of Yangfan and Alvagen and that as of September 30, 2008, Hexing and Tiansheng were no longer VIEs. Accordingly, the Group deconsolidated these entities as of the respective dates.

The cumulative losses of Yangfan and Alvagen as of September 1, 2008 were RMB387,996. The Company recorded this amount as additional paid-in capital in the consolidated balance sheet upon deconsolidation as the shareholders of the Yangfan and Alvagen did not require the Company to reimburse them for such losses. The

 

F-18


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

profits of Hexing and Tiansheng generated during 2008 net of prior year losses, amounting to RMB576,826, were recorded as non-controlling interests in the consolidated statement of operations for the year ended December 31, 2008 because the Company was not entitled to the profits of Hexing and Tiansheng.

Beginning from January 1, 2009, the Company renamed minority interests to non-controlling interests and reclassified non-controlling interests from the mezzanine to a separate line item in equity and applied the revised requirement presentation retrospectively to all periods presented for comparability.

 

4. BUSINESS COMBINATION

In June 2009, the Group acquired 100% equity interest in Zhejiang Jinko for a total consideration of approximately RMB100 million. The acquisition was consummated on June 30, 2009. Consequently, the Group consolidated the financial statements of Zhejiang Jinko starting from June 30, 2009. Zhejiang Jinko was established in August 2006 and is a manufacturer of solar cells. This acquisition allows the Group to expand its business to manufacturing of solar cells.

The total consideration of approximately RMB100 million for the purchase of Zhejiang Jinko was allocated as follows:

 

     As of June 30, 2009  
     RMB  

Current assets

   143,933,792   

Property, plant and equipment

   104,903,986   

Land use rights

   22,612,281   

Other assets

   9,881,184   

Current liabilities

   (194,190,602

Non-current liabilities

   (30,000,000

Deferred tax liabilities

   (2,779,473
      

Net assets at acquisition date

   54,361,168   

Goodwill

   45,645,832   
      

Total purchase cost

   100,007,000   
      

The following unaudited pro forma financial information illustrates the estimated results of operations for the year ended December 31, 2008 and 2009, as if the acquisition of Zhejiang Jinko had occurred as of the beginning of each period presented, after giving effect to purchase accounting adjustments. These pro forma results have been prepared for comparative purposes only and do not purport to be indicative of what operating results would have been had the acquisition actually taken place on the beginning of the periods presented, and may not be indicative of future operating results.

 

     Year ended December 31,  
     2008    2009  
     (Unaudited)    (Unaudited)  
     RMB    RMB  

Net revenue

   2,422,892,072    1,667,204,507   

Net income

   220,365,617    73,109,519   

Net income/(loss) attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders per share — basic and diluted

   3.56    (0.97

 

F-19


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

5. REVENUES

The Group’s revenues for the respective periods included sales of products and fees from provision of silicon material processing services which are detailed as follows:

 

     Year Ended December 31
     2007    2008    2009
     RMB    RMB    RMB

Sales of silicon wafers

      794,860,097    1,102,232,823

Sales of silicon ingots

   170,007,196    483,544,864    98,882

Sales of recovered silicon materials

   536,755,209    902,249,026    28,039,357

Sales of solar cells

         225,866,285

Sales of solar modules

         182,015,116

Processing service fees

   2,390,504    2,960,141    29,607,129
              

Total

   709,152,909    2,183,614,128    1,567,859,592
              

The following table summarizes the Group’s revenues generated from sales of products and provision of processing services to customers in respective geographic locations:

 

     Year Ended December 31
     2007    2008    2009
     RMB    RMB    RMB

Inside the PRC

   709,152,909    2,041,872,842    896,145,297

Outside the PRC

      141,741,286    671,714,295
              

Total

   709,152,909    2,183,614,128    1,567,859,592
              

 

6. TAXATION

As a company incorporated in the Cayman Islands, the Company is not subject to tax on income or capital gain. The Company’s subsidiaries established in Hong Kong, Paker and JinkoSolar International, are subject to Hong Kong profit tax at a rate of 17.5% for 2007, and 16.5% for 2008 and 2009 on its assessable profit. No Hong Kong profit tax was provided as the Group did not have assessable profit that was earned in or derived from Hong Kong during the periods presented.

For the periods presented, the Company’s subsidiaries and VIE subsidiaries in the PRC are subject to Corporate Income Tax (“CIT”) on the taxable income as reported in their respective statutory financial statements adjusted in accordance with the Income Tax Law of the People’s Republic of China concerning Foreign Investment Enterprise and Foreign Enterprises and the Enterprise Income Tax Law (collectively the “PRC Income Tax Laws”). Pursuant to the PRC Income Tax Laws, the Company’s subsidiaries and VIE subsidiaries in the PRC are generally subject to CIT at a statutory rate of 33% for the year ended December 31, 2007. Desun became a foreign invested enterprise in April 2007, and was exempt for income taxes from April 2007 to December 2007. As a foreign invested enterprise, Jiangxi Jinko and Zhejiang Jinko are entitled to a two year tax exemption from CIT starting the year in which they achieve a cumulative profit, and a 50% CIT reduction for the succeeding three years thereafter. Jiangxi Jinko was loss making for the year ended December 31, 2007. Jiangxi Jinko had cumulative profits as of December 31, 2008 and 2009 but did not record any income tax liability as of those dates given Jiangxi Jinko was entitled to the two year tax exemption. Zhejiang Jinko was entitled to the two year tax exemption for years ended December 31, 2008 and 2009.

 

F-20


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

Zhejiang Jinko had cumulative loss as of December 31, 2009. Jinko Import and Export had not started operation as of December 31, 2009 and had no taxable profit for the year ended December 31, 2009.

On March 16, 2007, the National People’s Congress approved the Corporate Income Tax Law of the People’s Republic of China (the “new CIT Law”). The new CIT Law revises the corporate income tax rate for domestic enterprises and foreign invested enterprises to 25% with effect from January 1, 2008. The new CIT Law also provides for preferential tax rates, tax incentives for prescribed industries and activities, grandfathering provisions as well as determination of taxable profit. Additionally, under the new CIT Law, 10% withholding income tax (“WHT”) will be levied on foreign investors for dividend distributions from foreign invested enterprises’ profit earned after January 1, 2008. For certain treaty jurisdictions such as Hong Kong which has signed tax treaties with the PRC, the WHT rate is 5%. Paker is established in Hong Kong. Deferred income taxes are not provided on undistributed earnings of the Group’s subsidiaries that are intended to be permanently reinvested in China. Cumulative undistributed earnings intended to be permanently reinvested totaled RMB329,116,831 and the amount of the unrecognized deferred tax liability on the permanently reinvested earnings was RMB16,455,842 as of December 31, 2009.

Composition of Income Tax Expense

The component of income tax expense included in the consolidated statement of operations for the years ended December 31, 2007, 2008 and 2009 are as follows:

 

     Year Ended December 31
         2007            2008             2009    
     (RMB)    (RMB)     (RMB)

Current income tax expense

      (822,280  

Deferred tax benefit

           1,342,038
               

Income tax (expense)/benefit

      (822,280   1,342,038
               

Reconciliation of the differences between statutory tax rate and the effective tax rate

A reconciliation between the statutory CIT rate and the Group’s effective tax rate is as follows:

 

     Year Ended December 31  
         2007             2008             2009      
     %     %     %  

Statutory CIT rate

   33      25      25   

Effect of permanent differences:

      

— Change in fair value of derivative

        2.4      4.1   

— Compensation expenses

             6.2   

— Other non-deductible expenses

        0.8      5.9   

Tax rate change

   0.2             

Difference in tax rate of a subsidiary outside the PRC

        1.5      0.7   

Effect of tax holiday for a subsidiary

   (33.2   (29.9   (45.1

Change in valuation allowance

        0.6      1.6   
                  

Effective CIT rate

        0.4      (1.6
                  

 

F-21


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

The aggregate amount and per share effect of the tax holiday are as follows:

 

     Year Ended December 31
     2007    2008    2009
     RMB    RMB    RMB

The aggregate amount of effect

   25,214,930    65,771,186    37,888,279

Per share effect — basic

   0.73    1.30    0.75

Per share effect — diluted

   0.73    1.30    0.75

Significant components of deferred tax assets

 

     As of December 31  
         2008             2009      
     RMB     RMB  

Net operating losses

   636,017      1,991,223   

Provision for inventories, accounts receivable and other receivable

        1,342,038   

Other temporary differences

   3,610      3,610   
            

Total deferred tax assets

   639,627      3,336,871   

Less: Valuation allowance

   (639,627   (1,994,833
            

Net deferred tax assets — current

        1,342,038   
            

Significant components of deferred tax liabilities

 

     As of December 31  
     2008    2009  
     RMB    RMB  

Increase in fair value of property, plant and equipment and land use rights arising from business combination

      2,930,934   

Pre-operating expenses of a subsidiary that are deductible in future periods

      (151,461
           

Deferred tax liabilities — non current, net

      2,779,473   
           

Movement of valuation allowances

 

     For the year ended
December 31,
 
           2008                 2009        
     RMB     RMB  

At beginning of year

   (448,134   (639,627

Current year additions

   (1,280,316   (1,355,206

Reversal of valuation allowances

   2,500        

Effect of de-consolidation of a subsidiary and VIE subsidiaries

   1,086,323        
            

At end of year

   (639,627   (1,994,833
            

Valuation allowances have been provided on the net deferred tax asset due to the uncertainty surrounding their realization. As of December 31, 2008 and 2009, valuation allowances were provided because it was more

 

F-22


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

likely than not that the benefits of the deferred income taxes will not be realized. If events occur in the future that allow the Group to realize more of its deferred tax assets than the presently recorded amounts, an adjustment to the valuation allowances will result in a decrease in tax expense when those events occur.

On January 1, 2007, the Group adopted an interpretation issued by the FASB that clarifies the accounting for uncertainty in income taxes recognized in the Company’s consolidated financial statements and prescribes a more likely than not threshold for financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. This interpretation also provides guidance on de-recognition of income tax assets and liabilities, classification of current and deferred income tax assets and liabilities, accounting for interest and penalties associated with tax positions, accounting for income taxes in interim periods, and income tax disclosures. The Group did not have any adjustment to the opening balance of retained earnings as of January 1, 2007 as a result of the implementation of this interpretation. As of December 31, 2009, the Group did not record any liability for any uncertain tax positions. The Group’s policy is to recognize, if any, tax related interest as interest expenses and penalties as general and administrative expenses. For periods presented, the Group did not have any interest and penalties associated with tax positions.

 

7. SHORT-TERM INVESTMENTS

Short-term investments as of December 31, 2009 included term deposits of RMB49,000,000 with original maturity of more than 3 months and the investments of RMB1,400,000 in certain open-end equity funds in the PRC.

The following table summarizes short-term investments as of December 31, 2009 which were classified as available-for-sale securities:

 

     As of December 31, 2009
     Amortized
Cost
   Fair Value    Gross
Unrealized
Holding Gain
  

Contractual Maturity
from Balance
Sheet Date

     RMB    RMB    RMB     

Time deposits

   49,000,000    49,000,000       5 to 343 days

Open-end equity funds

   1,400,000    1,462,300    62,300   
                 

Total

   50,400,000    50,462,300    62,300   
                 

The carrying value of time deposits approximated their fair value because such deposits bear market interest rates and have short period of maturity.

 

8. ADVANCES TO SUPPLIERS

 

     As of December 31,  
     2008     2009  
     RMB     RMB  

Advances to suppliers under purchase contracts with terms of less than 1 year

   65,638,316      92,059,655   

Advances to suppliers under purchase contracts with terms of more than 1 year

   232,270,550      232,164,000   
            

Total

   297,908,866      324,223,655   

Advances to suppliers to be utilized beyond one year

   (187,270,550   (230,899,519
            

Advances to suppliers — current

   110,638,316      93,324,136   
            

 

F-23


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

In July 2008, the Group entered into two long-term purchase agreements with two suppliers to purchase an aggregate 8,550 tons of virgin polysilicon materials over a period of five to ten years. These agreements stipulated the contractual advance payments according to specified timetable. In January and February 2009, the Group and the respective suppliers agreed to amend these agreements whereby the purchase terms and payment schedules were revised. Advance payments of which receipt of goods are expected to be beyond one year as of the balance sheet date are classified as non-current assets in the Group’s consolidated balance sheets.

As of December 31, 2009, advance to suppliers with terms of less than 1 year mainly represent payments for procurement of recoverable silicon materials, virgin polysilicon and solar cells and the Group has delivery plan with the respective suppliers to receive the materials in the next six months.

No provision was made against the balance of advances to suppliers as of December 31, 2009 based on management’s assessment of the recoverability of such advances (Note 24).

 

9. INVENTORIES

Inventories consisted of the following:

 

     As of December 31,  
     2008     2009  
     RMB     RMB  

Raw materials

   76,408,931      118,098,674   

Work-in-progress

   60,529,437      47,144,472   

Finished goods

   140,336,842      84,772,679   
            
   277,275,210      250,015,825   

Provision

   (5,244,729   (4,823,427
            

Total

   272,030,481      245,192,398   
            

Inventories are pledged as collateral for the Group’s short-term and long-term borrowings (Note 16).

Movement of inventory provision

 

     For the year ended
December 31,
 
     2008     2009  
     RMB     RMB  

At beginning of year

        (5,244,729

Current year provision

   (5,244,729   (11,422,243

Current year utilization

        11,843,545   
            

At end of year

   (5,244,729   (4,823,427
            

 

F-24


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

10. PREPAYMENTS AND OTHER CURRENT ASSETS

Prepayments and other current assets consisted of the following:

 

     As of December 31,
     2008    2009
     RMB    RMB

Value-added tax recoverable

   8,040,047    46,262,641

Value-added tax refundable on export sales

      28,861,308

IPO related costs

   8,393,227    15,507,350

Advance to a supplier to be refunded

   5,993,697    1,993,697

Prepaid service fees

      2,707,257

Employee advances

   1,437,166    2,177,176

Prepaid rent and others

   1,813,124    1,718,503

Prepaid qualification authentication fee

      2,098,148

Deposits for customs duty and rental

   3,547,121    3,497,913

Loan receivable

   3,000,000   
         

Total

   32,224,382    104,823,993
         

Value-added tax recoverable represented the balance that the Group can utilize to deduct its value-added tax liability within the next 12 months.

Value-added tax refundable on export sales are calculated at certain rates, ranged from 5% to 17% for various products during the year ended December 31, 2009, of the Group’s export sales and will be refunded from tax authorities within the next 12 months.

IPO related costs comprised professional fees incurred in relation to the Group’s proposed initial public offering, which will be offset against the proceeds when the offering is consummated.

Advance to a supplier to be refunded represented a prior advance payment of RMB5,993,697 made by Jiangxi Jinko to a supplier who failed to deliver goods in accordance with relevant contracts, net of a provision of RMB4,000,000 as of December 31, 2009. Jiangxi Jinko expects to collect the remaining balance of RMB1,993,697 in the next 12 months.

As of December 31, 2008 and 2009, all of the employee advances and loan receivable are interest-free, not collateralized and will be repaid or settled within one year from the respective balance sheet dates.

 

F-25


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

11. PROPERTY, PLANT AND EQUIPMENT, NET

Property, plant and equipment and related accumulated depreciation are as follows:

 

     As of December 31,  
     2008     2009  
     RMB     RMB  

Buildings

   58,849,298      119,063,891   

Machinery and equipment

   297,098,871      530,829,001   

Furniture, fixture and office equipment

   3,351,406      8,692,752   

Motor vehicles

   4,362,543      6,231,734   
            
   363,662,118      664,817,378   

Less: accumulated depreciation

   (10,853,358   (54,694,338
            

Subtotal

   352,808,760      610,123,040   

Construction in progress

   120,723      131,358,409   
            

Property, plant and equipment, net

   352,929,483      741,481,449   
            

Depreciation expense was RMB1,545,255, RMB12,824,606 and RMB43,840,980 for the years ended December 31, 2007, 2008 and 2009, respectively.

Construction in progress primarily represents the construction of new buildings at Zhejiang Jinko. Costs incurred in the construction were transferred to property, plant and equipment upon construction completion and the buildings became ready for use, at which time depreciation also commenced.

As of December 31, 2009, included in machinery and equipment are assets of RMB14,125,273 under capital lease. The total net book value of such assets as of December 31, 2009 was RMB12,249,306 (Note 17).

Certain property, plant and equipment are pledged as collateral for the Group’s short-term borrowings (Note 16).

 

12. LAND USE RIGHTS, NET

Land use rights represent fees paid to the government to obtain the rights to use certain lands over periods of 50 or 70 years, as applicable, in the PRC.

 

     As of December 31,  
     2008     2009  
     RMB     RMB  

Land use rights

   168,245,503      233,358,394   

Less: accumulated amortization

   (2,735,868   (4,980,884
            

Land use rights, net

   165,509,635      228,377,510   
            

Amortization expense was RMB73,846, RMB2,719,654 and RMB2,245,016 for the years ended December 31, 2007, 2008 and 2009, respectively. As of December 31, 2009, estimated amortization expense in each of the next five years is RMB3,934,346.

Certain land use rights are pledged as collateral for the Group’s short-term borrowings (Note 16).

 

F-26


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

13. INTANGIBLE ASSETS, NET

Intangible assets and its related amortization are as follow:

 

     As of December 31,  
         2008            2009      
     RMB    RMB  

Trademark

      234,946   

Computer software

      48,315   

Less: accumulated amortization

      (4,130
           

Intangible assets, net

      279,131   
           

Amortization expense was nil, nil and RMB4,130 for the years ended December 31, 2007, 2008 and 2009, respectively. Estimate of amortization expenses schedule in the next five years since December 31, 2009 are as following:

 

Year ending December 31

   RMB

2010

   33,158

2011

   33,158

2012

   33,158

2013

   33,158

2014

   29,028

 

14. OTHER ASSETS

Other assets consisted of the following:

 

     As of December 31,
         2008            2009    
     RMB    RMB

Prepayments for purchase of property, plant and equipment

   39,092,800    19,001,650

Deposit for capital lease

   4,237,582    3,744,581

Prepaid interest for a long-term borrowing — non-current portion

      1,756,201

Prepaid service fee — non-current portion

      813,061
         

Total

   43,330,382    25,315,493
         

 

F-27


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

15. OTHER PAYABLES AND ACCRUALS

Other payables and accruals consisted of the following:

 

     As of December 31,
         2008            2009    
     RMB    RMB

Payables for purchase of property, plant and equipment

   28,290,613    91,387,236

Capital lease obligations — current portion (Note 17)

   6,998,091    3,692,176

Accrued professional service fees

   6,836,102    9,835,056

Accrued utilities and rentals

   4,561,450    6,790,382

Accruals for costs related to the issuance of Series B Redeemable Convertible Preferred Shares

   500,000   

Deposit from a customer in relation to a long-term purchase agreement

   34,298,500   

Accrued warranty cost

      1,727,717

Others

   1,558,249    3,317,483
         

Total

   83,043,005    116,750,050
         

The deposit from a customer in relation to a long-term purchase agreement as of December 31, 2008 was paid by a customer to secure polysilicon material supply from a third party supplier together with Jiangxi Jinko and was settled upon execution of the supply agreement between the customer and the third party supplier in 2009.

 

16. BORROWINGS

(a) Short-term borrowings

 

     As of December 31,
     2008    2009
     RMB    RMB

Short-term bank borrowings

   150,000,000    516,084,026

Long-term bank borrowings — current portion (Note 16(b))

      60,000,000
         

Total short-term borrowings

   150,000,000    576,084,026
         

The short-term bank borrowings outstanding as of December 31, 2008 and 2009 carried a weighted average interest rate of 7.64% and 5.19% per annum, respectively. The borrowings were for one year term and matured at various times. Proceeds from these short-term bank borrowings were for working capital purposes. None of the short-term bank borrowings had financial covenants or restrictions other than pledge of the Group’s assets as described below.

Included in the balance of short-term bank borrowings as of December 31, 2009 was a borrowing of RMB25,184,026, which is denominated and repayable in EURO.

As of December 31, 2009, Jiangxi Jinko had short-term bank borrowings of RMB77,000,000 which were collateralized on certain land use rights, buildings, equipments, including RMB26,000,000 which was also guaranteed by the Shareholders. The net book value of the land use rights, buildings and equipments under collaterals were RMB94,430,822, RMB53,574,274 and RMB27,076,869, respectively.

 

F-28


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

As of December 31, 2009, Jiangxi Jinko had short-term bank borrowings of RMB219,000,000 which were collateralized on Jiangxi Jinko’s inventories of RMB539,857,230. Included in these borrowings was RMB50,000,000 guaranteed by the Shareholders.

As of December 31, 2009, Jiangxi Jinko had short-term bank borrowing of RMB56,000,000 which were collateralized on Jiangxi Jinko’s accounts receivable and notes receivable. These short-term bank borrowings were also guaranteed by the Shareholders.

As of December 31, 2009, Jiangxi Jinko had short-term bank borrowings of RMB20,000,000 guaranteed by Desun and RMB17,000,000 collateralized on certain land use rights and buildings of Desun. In addition, these borrowings of RMB37,000,000 were also guaranteed by the Shareholders.

As of December 31, 2009, Zhejiang Jinko had short-term bank borrowings of RMB7,900,000 which are collateralized on its land use rights and certain buildings. The net book values of these assets under collaterals were RMB11,577,913 and RMB18,306,009, respectively, as of December 31, 2009.

As of December 31, 2009, Zhejiang Jinko had short-term bank borrowings of RMB94,000,000 which were guaranteed by Jiangxi Jinko, and of which RMB40,000,000 was also guaranteed by one of the Shareholders.

Subsequent to December 31, 2009, the Group obtained additional short-term bank borrowings of RMB209,055,613, and repaid short-term bank borrowings of RMB118,581,597. These additional short-term bank borrowings were collateralized on part of the Group’s letter of credit, land use right and buildings, and were guaranteed by Jiangxi Jinko.

(b) Long-term borrowings

 

     As of December 31,  
         2008        2009  
     RMB    RMB  

Long-term bank borrowings

      410,000,000   

Less: Current portion

      (60,000,000

Deferred financing cost (Note 25(e))

      (1,250,000
           

Total long-term borrowings

      348,750,000   
           

Future principal repayments on the long-term borrowings are as follows:

 

     RMB

2010

   60,000,000

2011

   100,000,000

2012

   250,000,000
    

Total

   410,000,000
    

In June 2009, Jiangxi Jinko obtained a bank borrowing of RMB79,000,000 which is repayable in June 2012. The borrowing carries a variable interest rate that is determined quarterly with reference to the prevailing base lending rate set by PBOC. The effective interest rate of the borrowing was 5.4% as of December 31, 2009.

 

F-29


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

Interest is payable monthly. The borrowing was collateralized on Jiangxi Jinko’s inventories of RMB78,999,993. The Group repaid RMB20,000,000 of this borrowing in September 2009 before its maturity.

In July 2009, Jiangxi Jinko obtained a bank borrowing of RMB80,000,000 of which RMB 30,000,000 is repayable in July 2010 and RMB50,000,000 is repayable in July 2011. The borrowing carries a variable interest rate that is determined annually with reference to the prevailing base lending rate set by PBOC. The effective interest rate of the borrowing was 4.86% as of December 31, 2009. Interest is payable monthly. The borrowing was guaranteed by the Shareholders and collateralized with Jiangxi Jinko’s equipments with net book value of RMB126,752,581 as of December 31, 2009.

In August 2009, Jiangxi Jinko obtained a bank borrowing of RMB41,000,000 which is repayable in July 2012. The borrowing carries a variable interest rate that is determined quarterly with reference to the prevailing base lending rate set by PBOC. The effective interest rate of the borrowing was 5.4% as of December 31, 2009. Interest is payable monthly. The borrowing was collateralized with Jiangxi Jinko’s land use right with net book value of RMB52,638,891 as of December 31, 2009.

In September 2009, Jiangxi Jinko obtained a bank borrowing of RMB20,000,000 which is repayable in September 2012. The borrowing carries a variable interest rate that is determined quarterly with reference to the prevailing base lending rate set by PBOC. The effective interest rate of the borrowing was 5.4% as of December 31, 2009. Interest is payable monthly. The borrowing was collateralized with Jiangxi Jinko’s land use right with net book value of RMB91,375,714 as of December 31, 2009.

In October 2009, Jiangxi Jinko obtained a bank borrowing of RMB30,000,000, with RMB20,000,000 repayable in July 2011 and RMB10,000,000 repayable in July 2012. The borrowing carries a variable interest rate that is determined quarterly with reference to the prevailing base lending rate set by PBOC. The effective interest rate of the borrowing was 4.86% as of December 31, 2009. Interest is payable monthly. The borrowing was collateralized with Jiangxi Jinko’s equipments with net book value of RMB27,643,435 as of December 31, 2009 and was guaranteed by the Shareholders.

In December 2009, Jiangxi Jinko obtained a bank borrowing of RMB70,000,000 which is repayable in July 2012. The borrowing carries a variable interest rate that is determined quarterly with reference to the prevailing base lending rate set by PBOC. The effective interest rate of the borrowing was 4.05% as of December 31, 2009. Interest is payable monthly. The borrowing was collateralized with Jiangxi Jinko’s equipments with net book value of RMB141,415,988 as of December 31, 2009. In addition to the collaterals, this borrowing was guaranteed by the Shareholders.

In June 2009, Jiangxi Jinko entered into a loan agreement with Jiangxi Heji Investment Co., Ltd. (“Heji”) in relation to a three-year loan in the principal amount of RMB100 million. As of December 31, 2009, Jiangxi Jinko has received RMB50 million proceeds which bear interest at the rate of 8.99% per annum. In September and October 2009, Heji and the Jiangxi Jinko re-arranged the loan into an entrusted bank loan through Agriculture Bank of China. The borrowing is guaranteed by the Shareholders and Hexing and secured by collaterals over the assets to be purchased with the borrowing.

In connection with this loan agreement, Heji required Jiangxi Jinko to enter into a guarantee agreement with Jiangxi International Trust and Investment Limited Corporation, or JITIC, for Heji’s own payment obligations under its separate trust loan agreement with JITIC under which, JITIC extended a loan to Heji in the principal amount of RMB50 million for a term of three years, that carries interest at the rate of 6.86% per annum. Jiangxi

 

F-30


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

Jinko recognized a guarantee liability of RMB1,500,000, with the amount being recognized as a deferred financing cost which is amortized over the period of the borrowing (Note 25(e)).

In March 2008, Zhejiang Jinko obtained a bank borrowing of RMB30,000,000 which is repayable in March 2011. The borrowing carries a variable interest rate that is determined quarterly with reference to the prevailing base lending rate set by PBOC. The effective interest rate of the borrowing was 5.4% as of December 31, 2009. Interest is payable monthly. The borrowing is guaranteed by Jiangxi Jinko.

In July 2008, Zhejiang Jinko obtained a bank borrowing of RMB30,000,000 which is repayable in May 2010. The borrowing carries a variable interest rate that is determined quarterly with reference to the prevailing base lending rate set by PBOC. The effective interest rate of the borrowing was 5.4% as of December 31, 2009. Interest is repayable monthly. The borrowing was guaranteed by Jiangxi Jinko.

Subsequent to December 31, 2009, the Group obtained additional long-term bank borrowings of RMB20 million, including RMB10 million collateralized by certain of the Group’s manufacturing equipment and RMB10 million guaranteed by Jiangxi Jinko. These borrowings carry variable interest rates that are determined by reference to the prevailing base lending rate set by PBOC.

 

17. CAPITAL LEASE

Desun disposed its manufacturing equipment, including monocrystalline silicon furnaces to a third party on July 30, 2008 at the net book value of the assets. On August 1, 2008, Jiangxi Jinko entered into a lease agreement with the third party pursuant to which Jiangxi Jinko leased these manufacturing equipments for the period from August 3, 2008 to May 3, 2010. According to the lease agreement, Jiangxi Jinko has the right to purchase the equipment at the end of the lease term at a nominal price of RMB100. The lease is accounted for as a capital lease in the consolidated financial statements.

The following is an analysis of the assets under the capital lease:

 

     As of December 31,  
     2008     2009  
     RMB     RMB  

Machinery and equipment

   14,125,273      14,125,273   

Less: Accumulated depreciation

   (468,967   (1,875,967
            

Total

   13,656,306      12,249,306   
            

The schedule for future minimum payments as of December 31, 2008 and 2009 under the capital lease together with the present value of the net minimum payments is illustrated as follows:

 

     As of December 31,  
     2008     2009  
     RMB     RMB  

Minimum lease payments

   11,233,443      3,744,481   

Less: Amount representing interest

   (522,265   (52,305
            

Present value of minimum lease payments

   10,711,178      3,692,176   
            

 

F-31


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

Analyzed as follows:

 

     As of December 31,
     2008    2009
     RMB    RMB

Payments within 1 year

   6,998,091    3,692,176

Payments beyond 1 year

   3,713,087   

 

18. EARNINGS/(LOSS) PER SHARE

As described in Note 21, Paker effected a share split of 1 for 1,000 and a split in the form of share dividend in May 2008. On December 16, 2008, all the then existing shareholders of Paker exchanged their respective shares of Paker for equivalent classes of shares of the Company. On September 15, 2009, the Company effected a share split with the result of each share becoming 50 shares of the same class (Note 21). Accordingly, all of shares and per share amount in the consolidated financial statements and the accompanying notes have been retroactively adjusted to reflect the change in ratio for all periods presented, as if such share splits and the Share Exchange occurred since inception.

Basic (loss)/earnings per share and diluted (loss)/earnings per share have been calculated as follows:

 

     For the year ended December 31  
     2007    2008     2009  
     RMB    RMB     RMB  

Numerator:

       

Net income attributable to JinkoSolar Holding Co., Ltd.

   76,045,545    218,719,958      85,409,632   

Series A Redeemable Convertible Preferred Shares accretion

      (13,747,632   (31,832,994

Series B Redeemable Convertible Preferred Shares accretion

      (10,739,483   (42,301,594

Allocation to preferred shareholders

      (16,471,759   (40,422,944

Deemed dividend to a preferred shareholder

           (8,015,089
                 

Net income / (loss) attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders — Basic and diluted

   76,045,545    177,761,084      (37,162,989
                 

Denominator:

       

Denominator for basic and diluted calculation — weighted average number of ordinary shares outstanding

   34,691,800    50,429,700      50,731,450   
                 

Basic and diluted earnings/(loss) per share attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders

   2.19    3.52      (0.73
                 

The potentially dilutive Redeemable Convertible Preferred Shares and share options are not included in the calculation of dilutive earnings/(loss) per share because of their anti-dilutive effect.

 

19. EMPLOYEE BENEFITS

The full-time employees of the Company’s subsidiaries and VIE subsidiaries incorporated in the PRC are entitled to staff welfare benefits, including medical care, welfare subsidies, unemployment insurance and pension benefits. These companies are required to pay for these benefits based upon certain percentages of employees’ salaries in accordance with the relevant regulations, and to make contributions to the state-sponsored pension and

 

F-32


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

medical plans from the amounts accrued for medical and pension benefits. The total amounts charged to the consolidated statements of operations for such employee benefits were RMB2,375,095, RMB6,921,094 and RMB11,460,709 for the years ended December 31, 2007, 2008 and 2009, respectively. The balances of liability accrued for such employee benefits were RMB4,707,205 and RMB17,931,245 as of December 31, 2008 and 2009, respectively. The PRC government is responsible for the medical benefits and ultimate pension liability to these employees.

 

20. REDEEMABLE CONVERTIBLE PREFERRED SHARES

On May 30, 2008, Paker issued 107,503 shares (5,375,150 shares post 2009 Share Split) of Series A Redeemable Convertible Preferred Shares at US$223.25 per share, for a total consideration of US$24,000,000. On September 18, 2008, Paker issued 148,829 shares (7,441,450 shares post 2009 Share Split) of Series B Redeemable Convertible Preferred Shares at US$236.51 per share, for a total consideration of US$35,200,000.

On December 16, 2008, all the then existing shareholders of Paker exchanged their respective classes of shares of Paker, including the Series A Redeemable Convertible Preferred Shares and Series B Redeemable Convertible Preferred Shares (“the Preferred Shares”), for equivalent classes of shares of the Company.

The par value of the Company’s Preferred Shares is US$0.001 per share (US$0.00002 per share post 2009 Share Split). The rights, preferences and privileges of the Preferred Shares are as follows:

Conversion

The Preferred Shares are convertible into ordinary shares at any time at the option of the preferred shareholders. Automatic conversion will occur based upon the then effective conversion price immediately upon the closing of a Qualified Initial Public Offering (“QIPO”) or at the election of the holders of at least 67% of the then outstanding Preferred Shares. Prior to the amendment referred to below, the QIPO was defined as a public offering on Nasdaq or other internationally recognized stock exchange with gross proceeds to the Company of not less than US$150,000,000 and total market capitalization, as a result of the offering, of not less than US$750,000,000. On September 15, 2009, an amendment was executed which changed the definition of a QIPO. Under the amendment, “QIPO means a fully underwritten initial public offering of the Company’s shares or ADSs with a listing on the NYSE;”

The conversion price of the Preferred Shares will equal the original issue price of the Preferred Shares. Pursuant to the share purchase agreements and agreements between the holders of the Preferred Shares and the Shareholders, the conversion price is subject to adjustments based on the Company’s 2008 adjusted net earnings (“2008 Performance”) as set out below:

Series A Redeemable Convertible Preferred Shares

If the Company’s 2008 Performance is less than RMB225 million but greater than RMB175 million, or greater than RMB275 million but not greater than RMB325 million, the conversion price of the Series A Redeemable Convertible Preferred Shares shall be adjusted based on a defined formula.

However, if all of the Series A Redeemable Convertible Preferred Shares have been converted into the Company’s ordinary shares at the time when the Company’s 2008 Performance becomes known, the Shareholders and the holders of the Series A Redeemable Convertible Preferred Shares shall transfer ordinary

 

F-33


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

shares amongst them, so that as the result of such transfer, the percentages of the total ordinary shares held by the holders of Series A Redeemable Convertible Preferred Shares equal the percentages of ordinary shares that the Series A Redeemable Convertible Preferred Shares would have converted into, after taking into effect such adjustment to the conversion price.

The Company’s 2008 Performance was within the range of RMB225 million and RMB275 million. Therefore, no adjustment was made to the conversion price of Series A Redeemable Convertible Preferred Shares as of December 31, 2008.

Series B Redeemable Convertible Preferred Shares

If the Company’s 2008 Performance is less than RMB250 million but greater than RMB200 million or greater than RMB250 million but not greater than RMB300 million, the conversion price of the Series B Redeemable Convertible Preferred Shares shall be adjusted based on a defined formula. The adjustment formula took into consideration factors such as the amount of the investment made by the holders of the Series B Redeemable Convertible Preferred Shares, the amount of the investment made by the holders of the Series A Redeemable Convertible Preferred Shares and the Company’s 2008 Performance. The formula was designed to adjust the number of conversion shares held by the holders of the Series B Redeemable Convertible Preferred Shares, if converted so that the percentage of the shares held by the holders of the Series B Redeemable Convertible Preferred Shares in the Company’s issued and outstanding share capital equaled the ratio of (i) the amount of investment made by them in the Company to (ii) the value of the Company calculated based on the 2008 Performance.

However, if all of the Series B Redeemable Convertible Preferred Shares have been converted into the Company’s ordinary shares at the time when the Company’s 2008 Performance becomes known, the Shareholders and the holders of the Series B Redeemable Convertible Preferred Shares shall transfer ordinary shares amongst them, so that as a result of such transfer, the percentages of the total ordinary shares held by the holders of Series B Redeemable Convertible Preferred Shares equal the percentages of ordinary shares that the Series B Redeemable Convertible Preferred Shares would have converted into, after taking into effect such performance adjustment to the conversion price. The Company’s 2008 performance was below RMB250 million, hence the conversion ratio of the Series B Redeemable Convertible Preferred Shares was adjusted from 1 for 1 to 1 for approximately 1.0054 based on the Company’s 2008 Performance. Such adjustment did not result in a beneficial conversion feature.

If the value of each ordinary share issuable upon the automatic conversion of the Series B Redeemable Convertible Preferred Shares in connection with a QIPO is less than the defined target IPO price per share, then the Shareholders would be required to transfer to the holders of Series B Redeemable Convertible Preferred Shares in connection with the auto conversion of their shares a number of ordinary shares the value of which, at the QIPO price per share, when added to the value of the ordinary shares issuable upon such conversion of the Series B redeemable convertible preferred shares in connection with the QIPO, would equal the product of (i) the number of outstanding Series B redeemable convertible preferred shares prior to the QIPO, multiplied by (ii) 1.5 times the adjusted original issue price per share of the Series B Redeemable Convertible Preferred Shares.

If the QIPO has not been completed by April 30, 2010 and the Company’s 2009 adjusted net earnings is less than RMB450 million (the “2009 Performance Target”), then the Shareholders shall transfer to the holders of Series B Redeemable Convertible Preferred Shares certain number of ordinary shares calculated based on a defined formula (the “2009 Performance Adjustment”), regardless of whether the Series B Redeemable

 

F-34


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

Convertible Preferred Shares are converted. The share transfer formula takes into consideration such factors as the amount of the investment by the holders of the Series B Redeemable Convertible Preferred Shares, the amount of the investment by the holders of the Series A Redeemable Convertible Preferred Shares and the Company’s 2008 and 2009 Performance. The formula requires the transfer of ordinary shares by the Shareholders to the holders of the Series B Redeemable Convertible Preferred Shares so that the percentage of the total number of shares transferred to and held by the holders of the Series B Redeemable Convertible Preferred Shares as compared to the Company’s issued and outstanding share capital will equal the ratio of (i) the amount of investment by them in the Company to (ii) the value of the Company calculated based on the difference between the 2009 Performance Target and the actual 2009 Performance. The Company determined that this embedded share transfer feature in the Series B meets the definition of a derivative and accordingly has been bifurcated from the host contract, the Series B Redeemable Convertible Preferred Shares, and accounted for as a derivative (the “2009 Performance Adjustment Derivative Liability”), (Note 26), from September 2008, the issue date of the Series B Redeemable Convertible Preferred Shares.

On June 22, 2009, the holders of Series B Redeemable Convertible Preferred Shares and the Shareholders agreed to lower the Company’s 2009 Performance Target in assessing the transfer of ordinary shares under the 2009 Performance Adjustment feature. The effect of this change on the value of the derivative liability was a reduction in value of RMB65.2 million. In addition, a 2010 performance target was added, which is an embedded share transfer feature that meets the definition of a derivative and requires bifurcation from the Series B Redeemable Convertible Preferred Shares to be accounted for as a derivative (the “2010 Performance Adjustment Derivative Liability), (Note 26), from June 22, 2009. The fair value of this new derivative at issuance was RMB18.2 million. Under the new 2010 performance target, if a QIPO has not been completed by April 30, 2011 and the Company’s 2010 performance is less than RMB200 million (the “2010 Performance Target”), then the Shareholders shall transfer to the holders of Series B Redeemable Convertible Preferred Shares, for no further consideration, certain amounts of ordinary shares calculated based on a defined formula (the “2010 Performance Adjustment”). The 2010 derivative adjustment formula takes into consideration such factors as the amount of the investment by the holders of the Series B Redeemable Convertible Preferred Shares, the amount of the investment by the holders of the Series A Redeemable Convertible Preferred Shares, and the Company’s 2009 and 2010 Performance. The formula was designed to adjust the total number of shares held by the holders of the Series B Redeemable Convertible Preferred Shares so that the percentage of the shares transferred to and held by the holders of the Series B Redeemable Convertible Preferred Shares in the Company as compared to the Company’s issued and outstanding share capital will equal the ratio of (i) the amount of investment by them in the Company to (ii) the value of the Company calculated based on the difference between the 2010 Performance Target and the actual 2010 Performance.

In consideration of the agreement to lower the Company’s 2009 Performance Target to RMB100 million, the Shareholders transferred on June 22, 2009 an aggregate of 76,258 (3,812,900 post 2009 Share Split as described in Note 21) ordinary shares to the holders of Series B Redeemable Convertible Preferred Shares. The fair value of these ordinary shares on June 22, 2009 of RMB43.6 million was imputed to the Company as if the Shareholders (who are the principal shareholder of the Company) contributed the shares to the Company and they were immediately reissued by the Company to the holders of the Series B Redeemable Convertible Preferred Shares.

The above amendment resulted in: (a) a decrease in the 2009 Performance Adjustment Derivative Liability by RMB65.2 million which was offset by the fair value of the 2010 Performance Adjustment Derivative Liability of RMB18.2 million; (b) an effective contribution of ordinary shares valued at RMB43.6 million by the Shareholders to the Company which was in turn transferred to the holders of the Series B Redeemable

 

F-35


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

Convertible Preferred Shares in consideration for agreeing to modify the terms of the 2009 Performance Adjustment. Accordingly, this amount has been treated as a capital contribution and as an offset to the net change in the fair value of the derivative liabilities in (a) above; (c) the recording of compensation expense of RMB3.4 million which is equal to the change in the fair value of the derivative liabilities net of the consideration transferred to the holders of Series B Redeemable Convertible Preferred Shares in (b) above.

In addition, in consideration for obtaining the agreement from one of the holders of Series A Redeemable Convertible Preferred Shares to the transfer of the 76,258 ordinary shares by the Shareholders to the holders of the Series B Redeemable Convertible Preferred Shares pursuant to the amendment described above, the Shareholders transferred to such holder of Series A Redeemable Convertible Preferred Shares on June 22, 2009 an aggregate of 14,031 (701,550 post 2009 Share Split as described in Note 21) ordinary shares as a consent fee. The fair value of the 14,031 ordinary shares on June 22, 2009 of RMB8,015,089 million was imputed to the Company as if the Shareholders (who are the principal shareholders of the Company) contributed the ordinary shares to the Company and they were immediately reissued by the Company to the holder of Series A Redeemable Convertible Preferred Shares as a deemed dividend.

If the Company does not meet the 2009 Performance Target and the 2010 Performance Target and there is no QIPO by April 30, 2010 and April 30, 2011 respectively, future transfers of ordinary shares from the Shareholders to the holders of Series B Redeemable Convertible Preferred Shares will be required and such transfers will be accounted for as equity contributions from the Shareholders to the Company and immediate redistributions to the holders of Series B Redeemable Convertible Preferred Shares as deemed dividend.

On September 15, 2009, the Shareholders reached agreement with the holders of Series A and Series B Redeemable Convertible Preferred Shares on the modification to certain existing terms (the “September 2009 Modification”), including (a) removed the existing definition of a QIPO and replaced it with the following: “QIPO means a fully underwritten initial public offering of the Company’s shares or ADSs with a listing on the New York Stock Exchange;” (b) removed the requirement for the Shareholders to transfer certain number of ordinary shares to the holders of the Series B Redeemable Convertible Preferred Shares if the value of issuable upon automatic conversion of the Series B Redeemable Convertible Preferred Shares in connection with an Qualified Public Offering is less than the defined target IPO price per share; and, (c) agreed that the 14,031 and 76,258 ordinary shares, respectively, transferred to the holders of Series A and Series B Redeemable Convertible Preferred Shares in connection with the June 2009 Modification be returned to the Shareholders in the event the redemption of the preferred shares are exercised by the holders of Series A and Series B Redeemable Convertible Preferred Shares.

The September 2009 Modification resulted in a reduction of RMB2.4 million in the fair value of the 2009 and 2010 Performance Adjustment Derivative Liabilities that the Company recognized in the Consolidated Statement of Operations as Change in Fair Value Derivatives. The September 2009 modification also resulted in an additional benefit transfer of RMB15.1 million from the holders of the Series A and B Redeemable Convertible Preferred Shares to the Shareholders due to the reduction in the fair value of the Series A and B Redeemable Convertible Preferred Shares on September 15, 2009 as a result of such modification. The Company recognized a total of RMB17.5 million in compensation expense (including the RMB15.1 million) in recognition of the total benefit transferred from the holders of Series A and B Redeemable Convertible Preferred Shares to the Shareholders that is attributed to the Company, given the Shareholders are also employees of the Company.

Redemption

After the third anniversary of the first issuance of the Series A Redeemable Convertible Preferred Shares, the holders of not less than a majority of the then outstanding Series A and Series B Redeemable Convertible

 

F-36


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

Preferred Shares may require the Company to redeem all of the outstanding Preferred Shares, if not previously converted, for an amount equal to 150% of their respective original issue price plus all accumulated and unpaid dividends. Dividends shall not accumulate or accrue unless declared.

Liquidation

In the event of any liquidation event and so long as any of the Series A and Series B Redeemable Convertible Preferred Shares have not been converted into ordinary shares, the shareholders of the Preferred Shares are entitled to receive in preference to the holders of the ordinary shares a per share amount equal to 150% of the respective original issue price and any declared but unpaid dividends. After such payment has been made to holders of the preferred shares, any remaining assets of the Company will be distributed pro rata to the holders of ordinary shares and the Preferred Shares on an as-converted basis.

Liquidation events include (i) a liquidation, winding-up or dissolution of the Company or the PRC Company (which refers to Jiangxi Jinko), or (ii) at the election of the preferred shareholders, a merger, acquisition or sale of voting control of the Company or the PRC Company in which its shareholders do not retain a majority of the voting power in the surviving company, or (iii) a sale of all or substantially all of the Company or the PRC Company’s assets, or (iv) a merger which values the Company at less than 150% of the post-money valuation of the Company immediately after the closing of the investment by holders of Series B Redeemable Convertible Preferred Shares in the Series B Redeemable Convertible Preferred Shares of Paker.

Dividend

The Series A Redeemable Convertible Preferred Shares shall rank pari passu with Series B Redeemable Convertible Preferred Shares in terms of rights to receive dividends and distributions from the Company. The holders of Series A and B Redeemable Convertible Preferred Shares shall be entitled to dividends in preference to any dividend on the ordinary shares or any other class or series of shares at the rate of 10% per annum of their respective original issue price, when and as declared by the Board. No dividend, whether in cash, in property, in shares of the Company or otherwise, shall be paid on any other class or series of shares of the Company unless and until the dividend aforesaid is first paid in full on the Series A and B Redeemable Convertible Preferred Shares. Except for the dividend rights set forth above, the Series A and B Redeemable Convertible Preferred Shares shall not participate with the ordinary shares in any further dividend or distribution of the earnings or profits of the Company. Dividends shall not accumulate or accrue unless declared.

Voting Rights

The holders of Series A and B Redeemable Convertible Preferred Shares have voting rights equal to the number of ordinary shares then issuable upon their conversion into ordinary shares. Such holder of the preferred shares is entitled to vote on such matters at any meeting of members of the Company.

The Company classified the Series A and B Redeemable Convertible Preferred Shares in the mezzanine section of the balance sheet. In addition, the Company records accretion on the preferred shares to its redemption value using the effective interest method from the issuance date to the earliest redemption date. For the year ended December 31, 2008, such accretion amounted to RMB13,747,632 and RMB10,739,483 against retained earnings for Series A and B Redeemable Convertible Preferred Shares, respectively. For year ended December 31, 2009, such accretion amounted to RMB31,832,994 and RMB42,301,594 against retained earnings for Series A and B Redeemable Convertible Preferred Shares, respectively.

 

F-37


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

In connection with the issuance of the Series A Redeemable Convertible Preferred Shares, Paker issued 14,629 ordinary shares (Note 21) and paid cash in the amount of US$469,000 to third parties for professional services rendered. Paker has the option to repurchase the 14,629 ordinary shares issued from the consultant at a nominal price upon the redemption of the Series A Redeemable Convertible Preferred Shares. The fair value of the ordinary shares issued is RMB20,004,865. In connection with the issuance of Series B Redeemable Convertible Preferred Shares, Paker is obligated to pay US$867,300 to third parties for consulting services. The fair value of the ordinary shares issued and the cash consideration paid to the third party consultants were recorded as stock issuance costs.

 

21. ORDINARY SHARES AND SHARE EXCHANGE

Upon inception, Paker had 10,000 authorized ordinary shares at HK$1 par value, with 100 (12,500,000 on post 2008 and 2009 Share Splits and Share Dividend basis) shares issued and outstanding to the founding shareholders. In May 2007, Paker issued additional 300 (37,500,000 on post 2008 and 2009 Share Splits and Share Dividend basis) ordinary shares at par value of HK$1 to the then existing ordinary shareholders on a pro rata basis. On May 30, 2008, Paker increased its authorized number of shares to 10,000,000 shares with par value of HK$0.001, consisting of 9,892,497 ordinary shares and 107,503 Series A Redeemable Convertible Preferred Shares by effecting a share split of 1 for 1,000 shares for its ordinary shares (“2008 Share Split”). On May 30, 2008, Paker effected a share split in the form of a Share Dividend of 600,000 ordinary shares at par value of HK$0.001 to the then existing ordinary shareholders on a pro rata basis.

On December 16, 2008, all the then existing shareholders of Paker exchanged their respective shares of Paker for equivalent classes of shares of the Company (“Share Exchange”). The par value of the ordinary shares of the Company is US$0.001.

On September 15, 2009, the Board of Directors approved a share split with the result of each share becoming 50 shares of the same class (“2009 Share Split”). The par value of the ordinary shares of the Company is US$0.00002 after the 2009 Share Split.

Accordingly, all shares and per share amounts in the consolidated financial statements and related notes have been retroactively adjusted to reflect the change in ratio for the periods presented, as if the 2008 and 2009 Share Splits, the Share Dividend and the Share Exchange occurred at the beginning of the periods presented.

As described in Note 20, the Company issued 14,629 (731,450 post 2009 Share Split) ordinary shares to a consultant in connection with the issuance of Series A Redeemable Convertible Preferred Shares. The fair value of which was recorded as issuance costs against the Series A Redeemable Convertible Preferred Shares proceeds.

As described in Note 20, as agreed with the preferred shareholders, the Shareholders agreed to transfer 76,258 (3,812,900 post 2009 Share Split) ordinary shares and 14,031 (701,500 post 2009 Share Split) ordinary shares to the holders of Series B Redeemable Convertible Preferred Shares and one of the holders of Series A Redeemable Convertible Preferred Shares, respectively, in connection with the amendment of the 2009 Performance Target. The share transfer was completed on September 15, 2009.

 

22. SHARE OPTION PLAN

The Group adopted a long-term incentive plan (the “Plan”) in July 2009 which was subsequently amended and restated. According to the Plan, the Company reserved 7,325,122 ordinary shares for the issuance of options

 

F-38


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

for purchase of the Company’s ordinary shares. The options have a contractual life of seven years with the exception of certain options granted to an employee that can be exercised until October 1, 2013. From August 28, 2009 to September 15, 2009, options were granted to certain of the Group’s officers and employees to purchase in total 3,024,750 shares of the Company’s ordinary shares at an exercise price of US$3.13 per share. The share options will generally vest in five successive equal annual installments on the last day of each year from the grant date, provided that the personnel’s service with the Group has not been terminated prior to each such vesting date. For a certain employee, the share options will vest in a series of 36 successive equal monthly installments, on the last day of each month, commencing from October 1, 2008, provided that the personnel’s service with the Group has not been terminated prior to each such vesting date. No portion of the share option, even vested, may be exercised prior to and within the 180-day period following an effective initial public offering as defined in the Plan.

Given the exercise restriction, the recognition of share-based compensation expense is delayed. Such expense accumulated from grant date will be recognized at the time of an effective initial public offering. Total share-based compensation expense not yet recognized as of December 31, 2009 due to the exercise restriction was RMB5,205,931.

As of December 31, 2009, the Company had 3,024,750 options outstanding. There were no options exercised, forfeited, or expired from the options grant dates to December 31, 2009. The weighted average remaining contractual life of the options outstanding as of December 31, 2009 is 5.7 years as of December 31, 2009. As of December 31, 2009, the number of options vested but not exercisable was 397,167. The weighted average remaining contractual life and the intrinsic value of such options is 3.8 years and nil as of December 31, 2009, respectively. As of December 31, 2009, the number of non-vested options was 2,627,583.

Total share-based compensation expense, determined based on the fair value of the options on the grant dates, applying an estimated forfeiture rate of 10%, amounted to approximately RMB16,763,689. Of which, excluding the amount of expense (RMB5,205,931) not recognized due to the exercise restriction, RMB11,557,758 relates to non-vested options not yet recognized as of December 31, 2009, which the Company expects to recognize over a weighted average period of 4.4 years.

The fair value of options granted was estimated with the following assumptions:

 

     For the year ended
December 31,
2009
 

Risk-free interest rate

   3.09%-3.93

Exercise multiple

   2.0   

Expected dividend yield

   0

Expected volatility

   83.5%-84

Fair value per option at grant date (RMB)

   4.98/6.70   

 

F-39


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

23. RELATED PARTY TRANSACTIONS AND BALANCES

(a) Related party balances

Outstanding amounts due from/to related parties as of December 31, 2008 and 2009 were as follows:

 

     As of December 31,
     2008    2009
     RMB    RMB

Amounts due from related parties:

     

Accounts receivables from a related party:

     

Accounts receivable from a subsidiary of ReneSola Ltd. (“ReneSola”, controlled by an immediate family member of the principal shareholders and directors of the Company, one of which is an executive officer of the Company)

   69,062,122    100,382
         

Total

   69,062,122    100,382
         

Amounts due to related parties:

     

Current liabilities:

     

Other payables to a related party

     

Other payables to Desun for leasing of land and buildings

      550,152
         

Total

      550,152
         

Balances due to related parties are interest-free, not collateralized, and have no definitive repayment terms.

(b) Related party transactions

For the years ended December 31, 2007, 2008 and 2009, revenue from sales of products and provision of processing services to a subsidiary of ReneSola amounted to RMB381,371,274, RMB631,856,095, and RMB28,317,315 respectively.

For the year ended December 31, 2008, multicrystalline silicon wafers purchased from a subsidiary of ReneSola amounted to RMB26,324,786.

For the year ended December 31, 2007, raw materials purchased from Global Trade International Industrial Limited (“Global Trade”) amounted to RMB22,008,528. Global Trade was owned by an immediate family member of one of the Shareholders, who is also the Company’s CEO. On December 27, 2007, the shareholder of Global Trade sold all the shares to an unrelated individual and accordingly Global Trade ceased to be the Group’s related party from that date.

On January 1, 2008, Desun and Jiangxi Jinko entered into an operating lease agreement pursuant to which Desun leased its buildings and land use rights to Jiangxi Jinko for a ten-year period from January 1, 2008 to December 31, 2017. Desun was deconsolidated from the Group on July 28, 2008 and became a related party of the Group. For the period from July 29, 2008 to December 31, 2008 and the year ended December 31, 2009, Desun charged Jiangxi Jinko RMB458,460 and RMB1,100,304 in rent (Note 25).

During the year ended December 31, 2009, the Shareholders provided guarantees for the Group’s several short-term and long-term bank borrowings. As of December 31, 2009, the balances of short-term and long-term

 

F-40


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

borrowings guaranteed by the Shareholders were RMB209,000,000 and RMB230,000,000, respectively (Note 16).

During the year ended December 31, 2009, Desun provided collateral, with its land use rights and buildings, for a short-term bank borrowings of RMB17,000,000 of the Group, and provided guarantee for the Group’s short-term bank borrowings of RMB20,000,000 (Note 16).

 

24. CERTAIN RISKS AND CONCENTRATION

Financial instruments that potentially subject the Group to significant concentrations of credit risk consist primarily of cash, prepayments and other monetary assets. As of December 31, 2008 and 2009, substantially all of the Group’s cash were held by major financial institutions located in the PRC.

The Group has contracts for the purchases of materials and equipment which are denominated in foreign currencies, including US Dollars and Japanese Yen. For the year ended December 31, 2009, 43% of the Group’s revenues are dominated in foreign currency, including US Dollars and Euros. Renminbi, the functional currency of the Group, is not freely convertible into foreign currencies. The Group does not hedge its foreign currency exposures and significant changes in the exchange rates between Renminbi and foreign currencies may affect the Group’s results of operations.

54% and 9.8% of the Group’s revenues for the year ended December 31, 2007 were derived from a subsidiary of ReneSola and Ningbo Solar Electric Power Co., Ltd., respectively. For the year ended December 31, 2008, 29% and 18% of the Group’s revenues were derived from a subsidiary of ReneSola and Ningbo Solar Electric Power Co., Ltd., respectively. For the year ended December 31, 2009, no customer individually accounted for more than 10% of the revenue for the periods presented.

The Group relies on a limited number of equipment suppliers including GT Solar Incorporated (“GT Solar”), Miyamoto Trading Limited (“Miyamoto”), Ningxia Jing Yang Automation Co., Ltd. (“Jing Yang”) and another supplier in the PRC (the “PRC Equipment Supplier”) for a majority of principal manufacturing equipment and spare parts. For the year ended December 31, 2007, 53% of the Group’s manufacturing equipment was purchased from the PRC Equipment Supplier. For the year ended December 31, 2008, 54% and 22% of the Group’s manufacturing equipment were purchased from Miyamoto and GT Solar, respectively. For the year ended December 31, 2009, 24% and 18% of the Group’s manufacturing equipment were purchased from Miyamoto and Jing Yang, respectively. No other suppliers individually accounted for more than 10% of the equipment purchase for the periods presented.

The Group relies on a limited number of raw material suppliers including Hexing, Shangrao Chuangxin Enterprise Co., Ltd. (“Chuangxin”), and Shangrao Dongyang Recycling Co., Ltd. (“Dongyang”). For the year ended December 31, 2008, 53% and 13% of the Group’s raw material purchases were from Hexing and Chuangxin, respectively. For the year ended December 31, 2009, 16% of the Group’s raw material purchases were from Dongyang. No other suppliers individually accounted for more than 10% of the Group’s raw material purchases for the periods presented.

As of December 31, 2009, 42% and 30% of the balance of the Group’s advance payments were made to two major suppliers, Hoku Materials, Inc. (“Hoku”), a fully owned subsidiary of Hoku Corporation (formerly known as “Hoku Scientific, Inc.”) and Wuxi Zhong Cai Technologies Co., Ltd., respectively. The Group is exposed to the credit and financial risks of these suppliers. The Group’s financial condition and results of operations may be

 

F-41


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

materially affected if the suppliers fail to meet their obligations of supplying silicon materials according to the contractually agreed schedules. No other individual supplier has advance payment balances that accounted for more than 10% of the total balance as of December 31, 2009.

Hoku is currently in the process of undertaking a construction project for producing the virgin polysilicon which the Group has contracted for. While the Group’s prepayment to Hoku is secured by a lien on Hoku’s assets according to the terms of the supply contract with Hoku, such lien is deeply subordinated and shared with all other customers and other senior lenders of Hoku. In Hoku Corporation’s quarterly report for the quarter ended December 31, 2009 filed on Form 10-Q on February 5, 2010, Hoku Corporation disclosed that it has obtained additional funding for the construction project to the point where it can commence initial shipments to its customers. However, Hoku will need to raise additional capital to complete the plant construction project, and if it does not raise sufficient capital or manage its liquidity, there would be substantial doubt that it would be able to continue as a going concern entity through December 31, 2010. As of December 31, 2009, the Group did not record any provisions in relation to the prepayment to Hoku as the potential impairment loss was not probable or estimable. However, if Hoku fails to complete its construction project, which could cause it to fail to fulfil its contractual delivery obligations to the Group, or if Hoku ceases to continue as a going concern, the Group may have difficulty recovering all or any of the deposits of US$20 million the Group paid to Hoku, which could have a material adverse effect on the financial condition of the Group.

As described in Note 16, Jiangxi Jinko’s short-term and long-term bank borrowings of RMB219,000,000 and RMB59,000,000 respectively were collateralized on its inventories totaling RMB539,857,230. As of December 31, 2009, the net book value of inventories held by Jiangxi Jinko was RMB202,567,604, which was lower than the amount of inventories under the collaterals. Jiangxi Jinko has not received request from the lenders for additional collaterals or early repayment of these loans.

 

25. COMMITMENTS AND CONTINGENCIES

(a) Operating lease commitments

From January 1, 2008, Jiangxi Jinko leased buildings and land use rights, from Desun, under a non-cancelable operating lease expiring in January 2018, with an annual rental of RMB1,100,304 and an option to renew. During the same time, the Group also leased offices for its representative offices located in Hong Kong and Shanghai under non-cancelable operating lease from third parties.

Future minimum obligations for operating leases are as follows:

 

Year ending December 31

   RMB

2010

   4,016,814

2011

   3,355,443

2012

   1,371,330

2013

   1,100,304

2014

   1,100,304

Years thereafter

   3,300,912
    

Total

   14,245,107
    

Rental expense under all operating leases were RMB452,461, RMB1,857,295 and RMB3,284,497 for the years ended December 31, 2007, 2008 and 2009, respectively.

 

F-42


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

(b) Capital commitments

The Group entered into several purchase agreements and supplementary agreements with certain suppliers to acquire machineries to be used in the manufacturing of its products. The Group’s total future payments under these purchase agreements amounted to RMB189,068,585 which were payable within one year from December 31, 2009.

(c) Polysilicon supplier agreements

The Group entered into long-term agreements with certain polysilicon vendors and manufacturers during 2008. These agreements specify contractual purchase commitments in quantities and pricing up to 10 years. The Group reviewed these contracts and determined that none of these agreements contain embedded derivatives as of December 31, 2009, nor would these supplier contracts cause the suppliers to be considered as variable interest entities. The Group does not anticipate that there will be any loss arising from the agreement for which the purchase prices are fixed.

The following is a schedule of future payment obligations under a fixed price long-term purchase agreement as of December 31, 2009:

 

Year ending December 31

   RMB

2010

   7,283,413

2011

   72,113,379

2012

   70,747,739

2013

   69,382,099

2014

   68,016,459

Years thereafter

   299,682,109
    

Total

   587,225,198
    

(d) Contingencies

In the opinion of management, as confirmed by its legal counsel, as of December 31, 2009, the ownership structure of the Group is in compliance with all existing PRC laws and regulations. It is also in the opinion of management that potential losses arising from the ownership structure based on current regulatory environment is remote. However, the Company cannot be assured that the PRC government authorities will not take a view contrary to the opinion of management. In addition, there may be changes and other developments in the PRC laws and regulations or their interpretations. If the current ownership structure of the Group was found to be not in compliance with any existing or future PRC laws or regulations, the Group may be required to restructure its ownership structure and operations in the PRC to comply with current or new PRC laws and regulations.

On July 1, 2009, Jiangxi Jinko filed an action in Shangrao People’s Court, Jiangxi Province against one of its equipment suppliers, Beijing Jingyuntong Technology Co., Ltd. (“Jingyuntong”), for the defects in the monocrystalline furnaces it purchased from Jingyuntong and claimed for compensation of RMB1.82 million for the cost of replacing the defect parts of the furnaces and the loss caused by the defects. Jiangxi Jinko held payment of part of the purchase proceeds with the amount of RMB1.32 million. On July 20, 2009, Jingyuntong filed an action in Daxing People’s Court, Beijing, the PRC against Jiangxi Jinko for the payment of this RMB1.32 million and the compensation for Jiangxi Jinko’s late payment of this amount which is calculated at 0.5% per day on the unpaid amount starting from April 8, 2008. As of date of the report, these two lawsuits are still ongoing and management believes losses associated with the lawsuits to be remote.

 

F-43


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

As of December 31, 2009, the Group made US$20 million prepayments to Hoku Materials, Inc. (“Hoku”) under a long-term purchase agreement. Hoku is currently in the process of undertaking a construction project for producing the virgin polysilicon which the Group has contracted for. While the Group’s prepayment to Hoku is secured by a lien on Hoku’s assets according to the terms of the supply contract with Hoku, such lien is deeply subordinated and shared with all other customers and other senior lenders of Hoku. In Hoku’s quarterly report for the quarter ended December 31, 2009 filed on Form 10-Q on February 5, 2010, Hoku disclosed that it would need to raise additional capital to finance its plant construction project, and if it does not raise sufficient capital or manage its liquidity, there would be substantial doubt that it would be able to continue as a going concern entity through December 31, 2010. As of December 31, 2009, the Group did not record any provisions in relation to the prepayment to Hoku as the potential impairment loss was not probable or estimable. However, if Hoku fails to complete its construction project, which could cause it to fail to fulfil its contractual delivery obligations to the Group, or if Hoku ceases to continue as a going concern, the Group may have difficulty recovering all or any of the deposits of US$20 million the Group paid to Hoku, which could have a material adverse effect on the financial condition of the Group.

(e) Guarantees

On June 13, 2009, Jiangxi Jinko entered into a loan agreement with Heji, in the principal amount of RMB100 million with a term of three years. Of this amount, RMB50 million was outstanding as of December 31, 2009. In consideration of this loan agreement, Heji required Jiangxi Jinko to enter into a guarantee agreement with Jiangxi International Trust Co., Ltd. (“JITCL”) on May 31, 2009 for Heji’s payment obligations under its separate trust loan agreement with JITCL (“JITCL Loan Agreement”), under which JITCL extended a loan to Heji in the principal amount of RMB50 million for a term of three years. In the event that Heji fails to perform its obligations under the JITCL Loan Agreement or otherwise defaults thereunder, Jiangxi Jinko will become liable for Heji’s obligations under the JITCL Loan Agreement. The Group recorded a guarantee liability of RMB1.5 million as of December 31, 2009

 

26. FAIR VALUE MEASUREMENTS

A hierarchy is established for inputs used in measuring fair value that maximizes the use of observable inputs and minimizes the use of unobservable inputs by requiring that the observable inputs be used when available. Observable inputs are inputs that market participants would use in pricing the asset or liability developed based on market data obtained from sources independent of the Company. Unobservable inputs are inputs that reflect the Company’s assumptions about the assumptions market participants would use in pricing the asset or liability developed based on the best information available in the circumstances. As such, fair value is a market-based measure considered from the perspective of a market participant who holds the asset or owes the liability rather than an entity-specific measure. The hierarchy is broken down into three levels based on the reliability of inputs as follows: (Level 1) observable inputs such as quoted prices in active markets; (Level 2) inputs other than the quoted price in active markets that are observable either directly or indirectly, or quoted prices in less active markets; and (Level 3) unobservable inputs with respect to which there is little or no market data, which require the Company to develop its own assumptions.

Short-Term Investments

As of December 31, 2009, short term investments consisted of term deposits and investments in certain open-end equity funds in the PRC. The Company also values these available-for-sale securities using observable

 

F-44


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

inputs that reflect quoted prices for securities with identical characteristics, and accordingly, the Company classified valuation techniques that use these inputs as Level 1.

Derivative Liabilities

On a recurring basis, the Company measures the 2009 and 2010 Performance Adjustment Derivative Liabilities (Note 20) at fair value. Since the 2009 and 2010 Performance Adjustment Derivative Liabilities are not traded on an exchange, they are valued using valuation model. Management is responsible for determining the fair value and considered a number of factors including valuations. The 2009 Performance Adjustment Derivative Liability was bifurcated at the fair value measured with the residual financing proceeds attributed to the Series B Redeemable Convertible Preferred Shares on issuance date. The fair value of the 2009 and 2010 Performance Adjustment Derivative Liabilities were determined based on both Level 2 and Level 3 inputs. Management determined that the Level 3 inputs, the IPO probabilities and the financial forecast as of each reporting date, are significant to the overall fair value measurement.

Recurring change in fair value

As of December 31, 2009, information about inputs into the fair value measurements of the Company’s assets and liabilities that are measured at fair value on a recurring basis in periods subsequent to their initial recognition is as follows:

 

     Fair Value Measurements at Reporting Date Using  

Description

   Balance as of
31 December
2009
    Quote Prices in
Active market for
Identical Assets
(Level 1)
   Significant
Other
Observable
Inputs (Level 2)
   Significant
Unobservable
Inputs (Level 3)
 

Assets:

          

Short term investments

   50,462,300      50,462,300         

Liabilities:

          

Embedded derivatives underlying Series B convertible redeemable preferred shares

   (54,938         (54,938

A summary of changes in Level 3 embedded derivative underlying Series B convertible redeemable preferred shares for the year ended December 31, 2008 and 2009 were as follows:

 

     RMB  

At issuance of the Series B Redeemable Convertible Preferred Shares

   204,689   

Realized loss included in Change in Fair Value of Derivative

   29,812,680   
      

Balance at December 31, 2008

   30,017,369   
      

Realized loss included in Change in Fair Value of Derivative

   13,599,301   

Realized loss reduced by contribution by founders (Note 20)

   (43,561,732
      

Balance at December 31, 2009

   54,938   
      

The Change in Fair Value of Derivatives recognized in earnings was RMB29.8 million and RMB13.6 million for the year ended December 31, 2008 and 2009, respectively.

 

F-45


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

27. RESTRICTED NET ASSETS

Relevant PRC laws and regulations permit payments of dividends by the Company’s PRC subsidiary only out of its retained earnings, if any, as determined in accordance with PRC GAAP. In addition, the statutory general reserve fund requires annual appropriations of 10% of net after-tax income to be set aside prior to payment of any dividends. As a result of these and other restrictions under PRC laws and regulations, the PRC subsidiary is restricted in its ability to transfer a portion of its net assets to the Company either in the form of dividends, loans or advances. Even though the Company does not currently require any such dividends, loans or advances from the Company’s PRC subsidiary for working capital or other funding purposes, it may in the future require additional cash resources from the PRC subsidiary due to changes in business conditions, to fund future acquisitions and development, or merely declare dividends or make distributions to the Company’s shareholders. Restricted net assets as of December 31, 2009 were RMB785,173,697.

 

28. SUBSEQUENT EVENTS

Subsequent to December 31, 2009, the Group obtained additional short-term and long-term bank borrowings (Note 16).

On January 25, 2010, as approval by the directors, the Company agreed to grant certain officers and employees options to purchase 726,250 ordinary shares of the Company at an exercise price of 85% of the initial public offering price per share. These options will vest in five successive equal annual instalments on the last day of each year from January 25, 2010, provided that the personnel’s service with the Group has not been terminated prior to each such vesting date.

On April 1, 2010, Paker established JinkoSolar GmbH as a wholly owned subsidiary in Germany to facilitate the development of the Group’s business in the overseas market.

As approved by the directors on April 6, 2010, the exercise price of share options granted from August 28, 2009 to September 15, 2009 (Note 22) was reduced from US$3.13 per share to US$2.08 per share.

 

29. ADDITIONAL INFORMATION — CONDENSED FINANCIAL STATEMENTS OF THE PARENT COMPANY

The separate condensed financial statements of the Company as presented below have been prepared in accordance with Securities and Exchange Commission Regulation S-X Rule 5-04 and Rule 12-04 and present the Company’s investments in its subsidiaries and VIEs under the equity method of accounting. Such investment is presented on separate condensed balance sheets of the Company as “Investments in subsidiaries and VIEs” and the Company’s shares of the profit or loss of subsidiaries and VIEs are presented as “Share of (loss) / income from subsidiaries and VIEs” in the statements of operations.

The Company completed the Share Exchange with the then existing shareholders of Paker, the holding company of its subsidiaries and VIE subsidiaries, on December 16, 2008 (Note 21). Upon completion, Paker becomes a wholly-owned subsidiary of the Company. The Share Exchange was accounted for as a recapitalization of the Company, as such, the separate condensed financial statements of the Company are presented as if the current corporate structure has been in existence since the beginning of the years presented.

 

F-46


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

The Company did not have any significant commitment, long term obligation, or guarantee as of December 31, 2008 and 2009.

Certain information and footnote disclosures normally included in financial statements prepared in accordance with US GAAP have been condensed and omitted. The footnote disclosures contain supplemental information relating to the operations of the Company, as such, these statements should be read in conjunction with the notes to the consolidated financial statements of the Company.

Condensed statements of operations:

 

     Year ended December 31  
     2007     2008     2009  
     RMB     RMB     RMB  

Net revenues

   7,581,178             

Cost of revenues

   (7,321,078          
                  

Gross profit

   260,100             
                  

Total operating expenses

   (1,195,547   (3,598,728   (25,388,252
                  

Loss from operations

   (935,447   (3,598,728   (25,388,252
                  

Investment disposal loss

        (10,165,516     

Share of income from subsidiaries and VIEs

   76,980,992      262,320,421      124,566,024   

Exchange loss

        (23,539     

Other expense

             (168,839

Change in fair value of derivative

        (29,812,680   (13,599,301
                  

Income before income tax expenses

   76,045,545      218,719,958      85,409,632   
                  

Income tax expenses

               
                  

Net income for the year

   76,045,545      218,719,958      85,409,632   
                  

Series A redeemable convertible preferred shares accretion

        (13,747,632   (31,832,994

Series B redeemable convertible preferred shares accretion

        (10,739,483   (42,301,594

Deemed dividend to a preferred shareholder

             (8,015,089

Allocation to preferred shareholders

        (16,471,759   (40,422,944
                  

Net income/(loss) attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders

   76,045,545      177,761,084      (37,162,989
                  

 

F-47


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

Condensed balance sheets:

 

     December 31, 2008    December 31, 2009
     RMB    RMB

ASSETS

     

Current assets:

     

Cash

     

Other current assets

      7,120,006
         

Total current assets

      7,120,006

Investments in subsidiaries and VIEs

   822,994,115    947,560,139
         

Total assets

   822,994,115    954,680,145
         

LIABILITIES

     

Current liabilities:

     

Due to subsidiaries

      4,479,060

Other current liabilities

      7,308,623

Derivative liability

   30,017,369    54,938
         

Total current liabilities

   30,017,369    11,842,621
         

Total liabilities

   30,017,369    11,842,621
         

Series A Redeemable Convertible Preferred Shares

   157,224,946    189,057,940

Series B Redeemable Convertible Preferred Shares

   245,402,237    287,703,831
         

Equity

     

Ordinary shares (US$0.00002 par value, 487,183,400 shares authorized; 50,731,450, 50,731,450 shares issued and outstanding as of December 31, 2008 and 2009, respectively)

   7,809    7,809

Additional paid-in capital

   121,463,257    193,929,492

Retained earnings

   268,878,497    272,138,452
         

Total Equity

   390,349,563    466,075,753
         

Total liabilities, preferred shares and equity

   822,994,115    954,680,145
         

Other current assets represented the IPO costs comprising professional fees incurred in relation to the Group’s public initial offering, which will be offset against the proceeds when the offering is consummated.

The balance due to subsidiaries represented the professional service fees paid by Jiangxi Jinko.

Other current liabilities represented accrual for unpaid professional service fees.

 

F-48


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

Condensed statements of cash flows:

 

     For the years ended  
     2007     2008     2009  
     RMB     RMB     RMB  

Cash flows from operating activities:

      

Net income

   76,045,545      218,719,958      85,409,632   

Adjustments to reconcile net income to net cash used in operating activities:

      

Change in fair value of derivatives

        29,812,680      13,599,301   

Non-cash compensation to ordinary shareholders/employees

             20,889,414   

Loss on disposal of subsidiary

        10,165,516        

Share of income from subsidiaries and VIEs

   (76,980,992   (262,320,421   (124,566,024

Exchange loss

        23,539        

Changes in operating assets and liabilities:

      

Increase in other current assets

   (151,676   (8,241,551   (7,120,006

Increase in due to a subsidiary

   930,000      3,131,088      7,308,623   

Increase in other current liabilities

   5,712,274      1,123,828      4,479,060   
                  

Net cash (used in)/from operating activities

   5,555,151      (7,585,363     
                  

Cash flows from investing activities:

      

Investments in subsidiaries

   (100,536,822   (484,406,349     

Cash received from the Shareholders for disposal of investment in a subsidiary

        57,849,277        

Cash received from disposal of Desun

        34,102,500        
                  

Net cash used in investing activities

   (100,536,822   (392,454,572     
                  

Cash flows from financing activities:

      

Proceeds from issuance of ordinary shares

   97,198,495             

Net proceeds from issuance of preferred shares

        398,849,622        
                  

Net cash provided by financing activities

   97,198,495      398,849,622        
                  

Effect of foreign exchange rate changes on cash

        (23,539     
                  

Net increase/(decrease) in cash

   2,216,824      (1,213,852     

Cash, beginning of year

   53,673      2,270,497        
                  

Cash, end of year

   2,270,497      1,056,645        
                  

Supplemental disclosure of non-cash investing and financing cash flow information:

      

Ordinary shares issued to consultant in connection with the issuance of Series A Redeemable Convertible Preferred Shares

        20,004,865        

Unpaid Series B Redeemable Convertible Preferred Shares issuance cost

        500,000        

 

F-49


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

30. PRO FORMA BALANCE SHEET AND EARNINGS PER SHARE FOR CONVERSION OF PREFERRED SHARES

The Redeemable Convertible Preferred Shares are convertible into ordinary shares at any time. Automatic conversion will occur based on the then effective conversion ratio immediately upon the closing of a Qualified Public Offering or at the election of the holders of at least 67% of the outstanding Redeemable Convertible Preferred Shares.

Upon closing of a Qualified IPO by April 30, 2011, the 2010 Performance Adjustment feature will be eliminated and hence the fair value of the 2010 Performance Adjustment Derivative Liability will decrease to zero. Such change in fair value of the derivative liability upon a Qualified IPO will be recognized as income in the Company’s consolidated statement of operations in the period in which a Qualified IPO is consummated.

The following disclosures are made in consideration of the closing of a Qualified Public Offering to be probable:

The unaudited pro-forma balance sheet as of December 31, 2009 presents an adjusted financial position as if the 5,375,150 shares of Series A Redeemable Convertible Preferred Shares and the 7,441,450 shares of Series B Redeemable Convertible Preferred Shares have been converted as of December 31, 2009, at the then conversion ratios of 1 for 1 for Series A Redeemable Convertible Preferred Shares and 1 for 1.0054 for Series B Redeemable Convertible Preferred Shares after the effect of the adjustment to conversion prices based on the Company’s performance for the year ended December 31, 2008 (Note 20). Accordingly, the carrying value of the Redeemable Convertible Preferred Shares, in the amount of RMB476,761,771, was reclassified from Redeemable Convertible Preferred Shares to Ordinary Shares and Additional Paid-in Capital for such pro forma adjustment.

The unaudited pro forma balance sheet as of December 31, 2009, also gives effect to the elimination of the 2010 Performance Adjustment Derivative Liability which will occur upon closing of a Qualified IPO. Accordingly, the carrying value of the derivative liability at December 31, 2009, in the amount of RMB54,938, was reclassified from Derivative Liabilities to (Accumulated Deficit)/Retained Earnings for such pro forma adjustment. Pro forma EPS does not give effect to the elimination of the derivative liabilities as the effect of such elimination is nonrecurring and will be included in the Company’s earnings immediately upon close of the Qualified IPO.

 

F-50


Table of Contents

JINKOSOLAR HOLDING CO., LTD.

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

FOR THE YEARS ENDED DECEMBER 31, 2007, 2008 AND 2009

 

The unaudited pro-forma earnings per share for the years ended December 31, 2008 and 2009 after giving effect to the conversion of the Series A Redeemable Convertible Preferred Shares and the Series B Redeemable Convertible Preferred Shares into common shares as of inception at the conversion ratio of 1 for 1 are as follows:

 

     For the year ended  
     December 31, 2008    December 31, 2009  
    

RMB

Unaudited

  

RMB

Unaudited

 

Numerator:

     

Net income/(loss) attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders

   177,761,084    (37,162,989

Pro-forma effect of preferred shares

   40,958,874    122,572,621   
           

Pro-forma net income attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders — Basic and diluted

   218,719,958    85,409,632   
           

Denominator:

     

Denominator for basic and diluted calculation — weighted average number of ordinary shares outstanding

   50,429,700    50,731,450   

Pro-forma effect of preferred shares

   5,272,050    12,816,600   
           

Denominator for pro-forma basic and diluted calculation

   55,701,750    63,548,050   
           

Pro-forma basic and diluted earnings per share attributable to JinkoSolar Holding Co., Ltd.’s ordinary shareholders

   3.93    1.34   
           

The potentially dilutive share options are not included in the calculation of pro-forma diluted earnings per share because of their anti-dilutive effect.

 

F-51


Table of Contents

LOGO


Table of Contents

 

 

 

5,835,000 American Depositary Shares

LOGO

JinkoSolar Holding Co., Ltd.

Representing 23,340,000 Ordinary Shares

 

 

 

 

 

Credit Suisse

 

Oppenheimer & Co.   Roth Capital Partners   Collins Stewart

 

 

 


Table of Contents

PART II

Information Not Required in Prospectus

Item 6. Indemnification of Directors and Officers

Cayman Islands law.  Cayman Islands law does not limit the extent to which a company’s articles of association may provide for indemnification of officers and directors, except to the extent that any such provision may be held by the Cayman Islands courts to be contrary to public policy, such as to provide indemnification against civil fraud or the consequences of committing a crime.

Memorandum and Articles of Association.  Our articles of association provide for indemnification of officers and directors for losses, damages, costs and expenses incurred in their capacities as such, except through dishonesty, fraud or their own willful neglect or default.

Indemnification Agreements.  Pursuant to indemnification agreements, the form of which is filed as Exhibit 10.29 and Exhibit 10.30 to this Registration Statement, we have agreed to indemnify our directors and officers against certain liabilities and expenses incurred by such persons in connection with claims made by reason of their being such a director or officer.

SEC Position.  Insofar as indemnification for liabilities arising under the Securities Act may be permitted to directors, officers or persons controlling us pursuant to the foregoing provisions, we have been informed that in the opinion of the SEC such indemnification is against public policy as expressed in the Securities Act and is therefore unenforceable.

Pursuant to the underwriting agreement for this offering, the form of which is filed as Exhibit 1.1 to this Registration Statement, the underwriters will agree to indemnify our directors and officers and persons controlling us, within the meaning of the Securities Act, against certain liabilities that might arise out of or are based upon certain information furnished to us by any such underwriter.

Item 7. Recent Sales of Unregistered Securities

As of the date hereof, we have issued the following securities. No underwriters were employed in any of these transactions. We believe that all of these sales were exempt from the Securities Act as transactions by an issuer not involving a public offering or pursuant to Regulation S promulgated under the Securities Act as sales by an issuer in offshore transactions.

 

Purchaser

  Date of Issuance     Number
of Securities
   

Title of Securities

 

Consideration

Xiande Li

  December 16, 2008 (1)    25,000,000 (1)    ordinary shares   500,000 ordinary shares in Paker, par value HK$0.001 per share

Kangping Chen

  December 16, 2008
(1) 
  15,000,000 (1)    ordinary shares   300,000 ordinary shares in Paker, par value HK$0.001 per share

Xianhua Li

  December 16, 2008
(1) 
  10,000,000 (1)    ordinary shares   200,000 ordinary shares in Paker, par value HK$0.001 per share

Wealth Plan Investments Limited

  December 16, 2008
(1) 
  14,629      ordinary shares   14,629 ordinary shares in Paker, par value HK$0.001 per share

Flagship

  December 16, 2008
(1) 
  67,263      Series A redeemable convertible preferred shares   67,263 Series A redeemable convertible preferred shares issued by Paker at price of US$223.005 per share

Everbest

  December 16, 2008
(1) 
  40,240      Series A redeemable convertible preferred shares   40,240 Series A redeemable convertible preferred shares issued by Paker at price of US$223.658 per share

 

II-1


Table of Contents

Purchaser

  Date of Issuance   Number
of Securities
 

Title of Securities

 

Consideration

SCGC

  December 16, 2008   55,811   Series B redeemable convertible preferred shares   55,811 Series B redeemable convertible preferred shares issued by Paker at price of US$236.513 per share

CIVC

  December 16, 2008   21,140   Series B redeemable convertible preferred shares   21,140 Series B redeemable convertible preferred shares issued by Paker at price of US$236.513 per share

Pitango

  December 16, 2008   29,597   Series B redeemable convertible preferred shares   29,597 Series B redeemable convertible preferred shares issued by Paker at price of US$236.513 per share

TDR

  December 16, 2008   12,684   Series B redeemable convertible preferred shares   12,684 Series B redeemable convertible preferred shares issued by Paker at price of US$236.513 per share

New Goldensea

  December 16, 2008   29,597   Series B redeemable convertible preferred shares   29,597 Series B redeemable convertible preferred shares issued by Paker at price of US$236.513 per share

 

(1)   On December 4, 2007, Offshore Incorporation (Cayman) Limited transferred all the equity interest of Greencastle to Wholly Globe, which is owned by Brilliant, Yale Pride and Peaky. Brilliant is owned by Xiande Li, Yale Pride is owned by Kangping Chen and Peaky is owned by Xianhua Li. On October 17, 2008, Wholly Globe distributed 25,000, 15,000 and 10,000 ordinary shares of Greencastle to Brilliant, Yale Pride and Peaky, respectively. On October 21, 2008, Greencastle changed its name to JinkoSolar Holding Co., Ltd. On December 16, 2008, we repurchased 24,999, 14,999, and 9,999 ordinary shares from Brilliant, Yale Pride and Peaky, respectively and reduced our share capital from US$50,000 before the repurchase to US$10,000. Subsequently, we subdivided our share capital into 10,000,000 shares, consisting of 9,743,668 ordinary shares, 107,503 series A redeemable convertible preferred shares and 148,829 series B redeemable convertible preferred shares, each at par value of US$0.001 per share. As a result of the share subdivision, each share held by Brilliant, Yale Pride and Peaky was subdivided into 1,000 ordinary shares at par value of US$0.001 per share. On December 16, 2008, we issued 499,000, 299,000 and 199,000 ordinary shares to Xiande Li, Kangping Chen and Xianhua Li in exchange for 500,000 ordinary shares, 300,000 ordinary shares and 200,000 ordinary shares in Paker respectively.

The references to numbers of shares, price per share, earnings per share and par value per share in this Item 7 have not been adjusted to give effect to the 2009 Share Split implemented on September 15, 2009 with the result of each share becoming 50 shares of the same class.

Item 8. Exhibits and Financial Statement Schedules

(a) Exhibits

See Exhibit Index beginning on page II-6 of this registration statement.

(b) Financial Statement Schedules

Schedules have been omitted because the information required to be set forth therein is not applicable or is shown in the Consolidated Financial Statements or the Notes thereto.

Item 9. Undertakings

The undersigned Registrant hereby undertakes to provide to the underwriters at the closing specified in the underwriting agreements, certificates in such denominations and registered in such names as required by the underwriters to permit prompt delivery to each purchaser.

 

II-2


Table of Contents

Insofar as indemnification for liabilities arising under the Securities Act may be permitted to directors, officers and controlling persons of the Registrant pursuant to the provisions described in Item 6, or otherwise, the Registrant has been advised that in the opinion of the Securities and Exchange Commission such indemnification is against public policy as expressed in the Securities Act and is, therefore, unenforceable. In the event that a claim for indemnification against such liabilities (other than the payment by the registrant of expenses incurred or paid by a director, officer or controlling person of the registrant in the successful defense of any action, suit or proceeding) is asserted by such director, officer or controlling person in connection with the securities being registered, the registrant will, unless in the opinion of its counsel the matter has been settled by controlling precedent, submit to a court of appropriate jurisdiction the question of whether such indemnification by it is against public policy as expressed in the Securities Act and will be governed by the final adjudication of such issue.

The undersigned Registrant hereby undertakes that:

(1) For purposes of determining any liability under the Securities Act, the information omitted from the form of prospectus filed as part of this Registration Statement in reliance upon Rule 430A and contained in a form of prospectus filed by the Registrant pursuant to Rule 424(b)(1) or (4) or 497(h) under the Securities Act shall be deemed to be part of this registration statement as of the time it was declared effective.

(2) For the purpose of determining any liability under the Securities Act, each post-effective amendment that contains a form of prospectus shall be deemed to be a new registration statement relating to the securities offered therein, and the offering of such securities at that time shall be deemed to be the initial bona fide offering thereof.

(3) For the purpose of determining liability under the Securities Act of 1933 to any purchaser, each prospectus filed pursuant to Rule 424(b) as part of a registration statement relating to an offering, other than registration statements relying on Rule 430B or other than prospectuses filed in reliance on Rule 430A, shall be deemed to be part of and included in the registration statement as of the date it is first used after effectiveness. Provided, however, that no statement made in a registration statement or prospectus that is part of the registration statement or made in a document incorporated or deemed incorporated by reference into the registration statement or prospectus that is part of the registration statement will, as to a purchaser with a time of contract of sale prior to such first use, supersede or modify any statement that was made in the registration statement or prospectus that was part of the registration statement or made in any such document immediately prior to such date of first use.

(4) For the purpose of determining liability of the registrant under the Securities Act of 1933 to any purchaser in the initial distribution of the securities, the undersigned registrant undertakes that in a primary offering of securities of the undersigned registrant pursuant to this registration statement, regardless of the underwriting method used to sell the securities to the purchaser, if the securities are offered or sold to such purchaser by means of any of the following communications, the undersigned registrant will be a seller to the purchaser and will be considered to offer or sell such securities to such purchaser:

 

  (i)   Any preliminary prospectus or prospectus of the undersigned registrant relating to the offering required to be filed pursuant to Rule 424;

 

  (ii)   Any free writing prospectus relating to the offering prepared by or on behalf of the undersigned registrant or used or referred to by the undersigned registrant;

 

  (iii)   The portion of any other free writing prospectus relating to the offering containing material information about the undersigned registrant or its securities provided by or on behalf of the undersigned registrant; and

 

  (iv)   Any other communication that is an offer in the offering made by the undersigned registrant to the purchaser.

 

II-3


Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Act of 1933 the Registrant certifies that it has reasonable grounds to believe that it meets all of the requirements for filing on Form F-1 and has duly caused this Registration Statement to be signed on its behalf by the undersigned, thereunto duly authorized, in Shangrao on May 12, 2010.

 

JINKOSOLAR HOLDING CO., LTD.

By:  

/s/    Kangping Chen        

Name:  

Kangping Chen

Title:  

Director and Chief Executive Officer

POWER OF ATTORNEY

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below does hereby constitute and appoint Kangping Chen and Longgen Zhang, and each of them singly, as his true and lawful attorneys-in-fact and agents, each with full power of substitution and re-substitution, for him and in his name, place and stead, in any and all capacities, to sign any and all amendments (including post-effective amendments) to this Registration Statement and sign any registration statement for the same offering covered by this Registration Statement that is to be effective upon filing pursuant to Rule 462(b) promulgated under the Securities Act of 1933, as amended, and all post-effective amendments thereto and to file the same, with all exhibits thereto, and other documents in connection therewith, with the Securities and Exchange Commission, granting unto said attorneys-in-fact and agents, and each of them, full power and authority to do and perform each and every act and thing requisite and necessary to be done in connection therewith and about the premises, as fully to all intents and purposes as he might or could do in person, hereby ratifying and confirming all that said attorneys-in-fact and agents, or any of them, or their or his substitutes or substitutes, may lawfully do or cause to be done by virtue hereof. Pursuant to the requirements of the Securities Act of 1933, as amended, this Registration Statement has been signed by the following persons in the capacities and on the dates indicated:

 

Signature

  

Title

 

Date

/s/    Xiande Li

Name: Xiande Li

   Chairman  

May 12, 2010

/s/    Kangping Chen

Name: Kangping Chen

   Director and Chief Executive Officer (principal executive officer)  

May 12, 2010

/s/    Xianhua Li

Name: Xianhua Li

   Director and Vice President  

May 12, 2010

/s/    Longgen Zhang

Name: Longgen Zhang

  

Chief Financial Officer

(principal financial and accounting officer)

 

May 12, 2010

/s/    Wing Keong Siew

Name: Wing Keong Siew

   Director  

May 12, 2010

/s/    Haitao Jin

Name: Haitao Jin

   Director  

May 12, 2010

/s/    Zibin Li

Name: Zibin Li

   Director  

May 12, 2010

/s/    Steven Markscheid

Name: Steven Markscheid

   Director  

May 12, 2010

 

II-4


Table of Contents

SIGNATURE OF AUTHORIZED REPRESENTATIVE IN THE UNITED STATES

Pursuant to the Securities Act of 1933, as amended, the undersigned, the duly authorized representative in the United States of the Registrant has signed this registration statement or amendment thereto in Newark, Delaware, on May 12, 2010.

 

PUGLISI & ASSOCIATES
By:  

/s/    Donald J. Puglisi        

Name:  

Donald J. Puglisi

Title:  

Managing Director

 

II-5


Table of Contents

EXHIBIT INDEX

 

Exhibit No.

 

Description

  1.1   Form of Underwriting Agreement
  3.1**   Second Amended and Restated Memorandum and Articles of Association, as currently in effect
  3.2**   Form of the Memorandum and Articles of Association conditionally approved by the company to become effective on closing of the offering
  4.1**   Registrant’s Specimen American Depositary Receipt (included in Exhibit 4.3)
  4.2**   Registrant’s Specimen Certificate for Shares
  4.3   Form of Deposit Agreement among the Registrant, the depositary and holder of the American Depositary Receipts
  4.4**   Shareholders Agreement among Paker Technology Limited, Xiande Li, Kangping Chen, Xianhua Li, Wealth Plan Investments Limited, Jiangxi Kinko Energy Co., Ltd., Flagship Desun Shares Co., Limited and Everbest International Capital Limited dated May 30, 2008
  4.5**   Series A Preferred Share Purchase Agreement among Paker Technology Limited, Xiande Li, Kangping Chen, Xianhua Li, Jiangxi Kinko Energy Co., Ltd. and Flagship Desun Shares Co., Limited dated May 8, 2008, amended on May 19, 2008 and September 18, 2008
  4.6**   Series A Preferred Share Purchase Agreement among Paker Technology Limited, Xiande Li, Kangping Chen, Xianhua Li, Jiangxi Kinko Energy Co., Ltd. and Everbest International Capital Limited dated May 19, 2008, amended on September 17, 2008
  4.7**   Letter of Appointment from Wealth Plan Investments Limited to Paker Technology Limited dated May 19, 2008
  4.8**   Letter from Wealth Plan Investments Limited and Flagship Desun Shares Co., Limited to Paker Technology Limited dated May 19, 2008
  4.9**   Series B Preferred Share Purchase Agreement among Paker Technology Limited, Xiande Li, Kangping Chen, Xianhua Li, Wealth Plan Investments Limited, Jiangxi Kinko Energy Co., Ltd., Flagship Desun Shares Co., Limited, Everbest International Capital Limited, SCGC Capital Holding Company Limited, CIVC Investment Ltd., Pitango Venture Capital Fund V, L.P. and Pitango Venture Capital Principals Fund V, L.P., TDR Investment Holdings Corporation, and New Goldensea (Hong Kong) Group Company Limited, and the Supplemental Agreement, both dated September 18, 2008
  4.10**   Amended and Restated Shareholders Agreement among Paker Technology Limited, Xiande Li, Kangping Chen, Xianhua Li, Wealth Plan Investments Limited, Jiangxi Kinko Energy Co., Ltd., Flagship Desun Shares Co., Limited, Everbest International Capital Limited, SCGC Capital Holding Company Limited, CIVC Investment Ltd., Pitango Venture Capital Fund V, L.P. and Pitango Venture Capital Principals Fund V, L.P., TDR Investment Holdings Corporation, and New Goldensea (Hong Kong) Group Company Limited, dated September 18, 2008
  4.11**   Shareholders Agreement among JinkoSolar Holding Co., Ltd., Xiande Li, Kangping Chen, Xianhua Li, Wealth Plan Investments Limited, Flagship Desun Shares Co., Limited, Everbest International Capital Limited, SCGC Capital Holding Company Limited, CIVC Investment Ltd., Pitango Venture Capital Fund V, L.P. and Pitango Venture Capital Principals Fund V, L.P., TDR Investment Holdings Corporation, and New Goldensea (Hong Kong) Group Company Limited, dated December 16, 2008, as amended
  4.12**   Share Subscription Agreement among JinkoSolar Holding Co., Ltd., Paker Technology Limited, Jiangxi Jinko Solar Co., Ltd., Xiande Li, Kangping Chen, Xianhua Li, Wealth Plan Investments Limited, Flagship Desun Shares Co., Limited, Everbest International Capital Limited, SCGC Capital Holding Company Limited, CIVC Investment Ltd., Pitango Venture Capital Fund V, L.P. and Pitango Venture Capital Principals Fund V, L.P., TDR Investment Holdings Corporation, and New Goldensea (Hong Kong) Group Company Limited and the Supplemental Agreement, both dated December 11, 2008, as amended

 

II-6


Table of Contents

Exhibit No.

 

Description

  4.13**   Agreement among JinkoSolar Holding Co., Ltd., Paker Technology Limited, Xiande Li, Kangping Chen, Xianhua Li, Jiangxi Jinko Solar Co., Ltd., SCGC Capital Holding Company Limited, CIVC Investment Ltd., Pitango Venture Capital Fund V, L.P. and Pitango Venture Capital Principals Fund V, L.P., TDR Investment Holdings Corporation, and New Goldensea (Hong Kong) Group Company Limited, dated December 16, 2008
  4.14**   English translation of Share Pledge Agreement among Xiande Li, Kangping Chen, Xianhua, Li and Paker Technology Limited, dated February 27, 2007
  4.15**   Agreement between Xiande Li, Kangping Chen, Xianhua Li and Flagship Desun Shares Co., Limited dated July 22, 2009, as amended
  4.16**   Amended and Restated Commitment Letter from Xiande Li, Kangping Chen and Xianhua Li to Series B Shareholders Regarding Adjustment of Share Percentage Based on the Year 2009 Net Earnings, dated June 22, 2009
  4.17**   Commitment Letter from Xiande Li, Kangping Chen and Xianhua Li to Series B Investors Regarding Exhibit C-Disclosure Schedule of the Share Subscription Agreement, dated December 11, 2008
  4.18**   Management Rights Letter issued by JinkoSolar Holding Co., Ltd. to Pitango Venture Capital Fund V, L.P. and Pitango Venture Capital Principals Fund V, L.P., dated December 16, 2008
  4.19**   English translation of Share Subscription and Capital Increase Agreement between Jiangxi Desun Energy Co., Ltd. and Paker Technology Limited dated February 28, 2007
  4.20**   Amendment Agreement among Xiande Li, Kangping Chen, Xianhua Li, SCGC Capital Holding Company Limited, CIVC Investment Ltd., Pitango Venture Capital Fund V, L.P. and Pitango Venture Capital Principals Fund V, L.P., TDR Investment Holdings Corporation, and New Goldensea (Hong Kong) Group Company Limited, dated June 22, 2009, as amended
  4.21**   English translation of Share Transfer Agreement between Paker Technology Limited and New Energy International Ltd., dated June 20, 2009
  4.22**   English translation of Share Transfer Agreement between Paker Technology Limited and Green Power Technology Co., Ltd., dated June 20, 2009
  4.23**   English translation of Share Transfer Agreement between Jinko Solar Co., Ltd. and Haining Chaoda Warp Knitting Co., Ltd., dated June 27, 2009
  5.1*   Opinion of Conyers Dill & Pearman, Cayman Islands counsel to the Registrant, regarding the validity of the ordinary shares being issued
  5.2*   Opinion of Chen & Co. Law Firm regarding structure
  8.1*   Opinion of Baker & McKenzie LLP regarding certain U.S. tax matters
  8.2*   Opinion of Conyers Dill & Pearman regarding certain Cayman Islands tax matters (included in Exhibit 5.1)
  8.3*   Opinion of Baker & McKenzie LLP regarding certain Hong Kong tax matters
  8.4*   Opinion of Chen & Co. Law Firm regarding PRC tax matters
10.1**  

2009 Long Term Incentive Plan, amended and restated as of January 25, 2010

10.2**  

English translation of Plant Lease Agreement between Jinko Solar Co., Ltd. and Jiangxi Desun Energy Co., Ltd. dated January 1, 2008

10.4†**  

Amended and Restated Supply Agreement between Jiangxi Jinko Solar Co., Ltd. and Hoku Materials, Inc. dated February 26, 2009, amended on November 25, 2009

10.5†**  

English translation of Purchase Contract between Jinko Solar Co., Ltd. and Wuxi Zhongcai Technological Co., Ltd. dated July 8, 2008, amended on January 7, 2009 and the Guarantee Contract dated July 10, 2008

 

II-7


Table of Contents

Exhibit No.

 

Description

10.6†**  

English translation of Purchase Contract between Jinko Solar Co., Ltd. and Jiangsu Green Power PV Co., Ltd. dated September 18, 2008, amended on January 15, 2009 and August 27, 2009

10.8†**  

English translation of Purchase Contract between Jinko Solar Co., Ltd. and Jiangyin Jetion Science and Technology Co., Ltd. dated September 15, 2008

10.9†**  

English translation of Purchase Contract between Jinko Solar Co., Ltd. and Shanghai Alex New Energy Co., Ltd. dated July 12, 2008, amended on December 22 and December 28, 2008

10.10†**   Supply Agreement between Jiangxi Jinko Energy Co., Ltd. and Solland Solar Cells B.V. dated November 27, 2008
10.11†**   Sales Contract between Jiangxi Jinko Solar Co., Ltd. and Win-Korea Trading PTY., Ltd. dated December 13, 2008, amended on January 15 and April 29, 2009
10.15**   English translation of Loan Contract between Jinko Solar Co., Ltd. and Bank of China, dated February 2009
10.18**   English translation of Maximum Amount Pledge Contract between Jinko Solar Co., Ltd. and Agricultural Bank of China, dated January 13, 2009
10.20**   English translation of Mortgage Contract between Jinko Solar Co., Ltd. and Bank of China, dated February 2009
10.21†**   English translation of Form of Maximum Amount Guarantee Contract between the directors and Bank of China
10.24**   English translation of Purchase Contract between Jinko Solar Co., Ltd. and Shangrao Hexing Enterprise Co., Ltd. dated September 18, 2008, amended on October 27, 2008
10.27**   Form of Executive Service Agreement of Chief Financial Officer
10.28**   English translation of Form of Employment Agreement
10.29**   Form of Indemnification Agreement between the directors and the Registrant
10.30**   Form of Indemnification Agreement between the directors and Paker Technology Limited
10.35**   English translation of Loan Agreement between Jinko Solar Co., Ltd. and Jiangxi Heji Investment Co., Ltd. dated June 13, 2009
10.36**   English translation of Guarantee Agreement between Jinko Solar Co., Ltd. and Jiangxi International Trust Co., Ltd., dated May 31, 2009
10.37**   English translation of Loan Contract between Jinko Solar Co., Ltd. and Agricultural Bank of China dated June 25, 2009
10.38**   (a) English translation of Entrusted Loan Contract between Jinko Solar Co., Ltd. and Agricultural Bank of China, dated September 27, 2009
  (b) English translation of Entrusted Loan Contract between Jinko Solar Co., Ltd. and Agricultural Bank of China, dated October 21, 2009
10.39†**   English translation of Maximum Amount Guarantee Agreement between the directors and Agricultural Bank of China
10.40**   English translation of Loan Contract between Jinko Solar Co., Ltd. and Bank of China dated July 20, 2009
10.41**   English translation of Loan Contract between Jinko Solar Co., Ltd. and Bank of China dated October 21, 2009
10.42**  

(a) English translation of Mortgage Contract between Jinko Solar Co., Ltd. and Bank of China, dated July 20, 2009

 

(b) English translation of Mortgage Contract between Jinko Solar Co., Ltd. and Bank of China, dated October 22, 2009

 

II-8


Table of Contents

Exhibit No.

 

Description

10.43†**   Strategy Cooperation Agreement between Jinko Solar Co., Ltd. and Upsolar Co., Limited, dated September 18, 2009, amended on January 23, 2010
10.45†**   Sales Representative Contract between Jinko Solar Co., Ltd. and Yonatan Sussman; Tzach Itzhak Dotan, dated October 19, 2009
10.46†**   English translation of Maximum Amount Guarantee Contract between Xiande Li and Bank of China dated October 13, 2009
10.47**   Sales Agreement between Zhejiang Jinko Solar Co., Ltd. and SOLART Systems/Solsmart BV, dated December 10, 2009
10.48†**   Co-Certification and Cooperation Contract between Jinko Solar Co., Ltd. and Visel Placas SL, dated December 24, 2009
10.49**   English translation of Fixed Assets Loan Contract between Jinko Solar Co., Ltd. and Bank of China, dated December 24, 2009
10.50**   English translation of Mortgage Contract between Jinko Solar Co., Ltd. and Bank of China, dated December 24, 2009
10.51†**   English translation of Sales Contract between Jinko Solar Co., Ltd. and Changzhou CuiBo Solar Technology Co., Ltd., dated January 18, 2010
10.52†**   Sales Contract between Jinko Solar Co., Ltd. and DIE Solar, dated January 5, 2010
10.53†**   Long Term Co-Operation Agreement and OEM Purchasing Contract for Solar Modules between Jinko Solar Co., Ltd. and ILB Helios AG and ILB Helios Spain S.A., dated January 15, 2010
10.54†**   Sales Contract between Zhejiang Jinko Solar Co., Ltd. and Erquan Technologies und Handels GmbH, dated September 25, 2009, amended on January 25, 2010
10.55†   Contract between Jinko Solar Co., Ltd. and Miyamoto Trading Limited, dated February 26, 2010
10.56†   Sales Contract between Shangrao Jinko Solar Import and Export Co., Ltd. and TRE Tozzi Renewable Energy dated March 5, 2010
10.57†   OEM Processing Agreement among One Sun (Holdings) Co., Ltd., Senergy Corporation (Shanghai) Co., Ltd. and Jinko Solar Co., Ltd., dated February 8, 2010
10.58†   Sales Contract between Shangrao Jinko Import and Export Co., Ltd. and E environment-energy GmbH dated March 22, 2010
10.59†   Sales Contract between Mage Solar GmbH and Jinko Solar Import and Export Co., Ltd., dated April 22, 2010
10.60**   Form of Executive Employment Agreement of Chief Strategy Officer
10.61†   Purchase Agreement between Arcman Solar Power Corp. and Shangrao Jinko Solar Import and Export Co., Ltd., dated April 10, 2010
21.1**   Subsidiaries of the Registrant
23.1**   Consent of PricewaterhouseCoopers Zhong Tian CPAs Limited Company, independent registered public accounting firm
23.2**   Consent of Baker & McKenzie (included in Exhibits 8.1 and 8.3)
23.3**   Consent of Conyers Dill & Pearman (included in Exhibits 5.1 and 8.2)
23.4*   Consent of Chen & Co (included in Exhibits 5.2 and 8.4)
24.1**   Powers of Attorney (included on the signature page of this registration statement)
99.1**   Code of Business Conduct and Ethics

 

  Confidential treatment has been requested for portions of this exhibit.
**   Filed previously.
*   To be filed by amendment.

 

II-9

Form of Underwriting Agreement

Exhibit 1.1

JinkoSolar Holding Co., Ltd.

5,835,000 American Depositary Shares

Representing

23,340,000 Ordinary Shares

(par value US$0.00002 per share)

 

 

Form Underwriting Agreement

                    , 2010

Credit Suisse Securities (USA) LLC

Eleven Madison Avenue

New York, New York 10010-3629

As the Representative of the several Underwriters

named in Schedule I hereto

Ladies and Gentlemen:

JinkoSolar Holding Co., Ltd., an exempted company incorporated in the Cayman Islands (the “Company”), proposes, subject to the terms and conditions stated herein, to issue and sell to the Underwriters named in Schedule I hereto (the “Underwriters”) an aggregate of 5,835,000 American Depositary Shares representing 23,340,000 ordinary shares, par value US$0.00002 per share (the “Ordinary Shares”), of the Company and, at the election of the Underwriters, up to 875,250 additional American Depositary Shares representing 3,501,000 Ordinary Shares. The aggregate of 5,835,000 American Depositary Shares representing 23,340,000 Ordinary Shares to be sold by the Company is herein called the “Firm ADSs”, and the aggregate of 875,250 American Depositary Shares representing 3,501,000 additional Ordinary Shares to be sold by the Company is herein called the “Optional ADSs”. The Firm ADSs and the Optional ADSs that the Underwriters elect to purchase pursuant to Section 2 hereof are herein collectively called the “ADSs”. The Ordinary Shares represented by the Firm ADSs are hereinafter called the “Firm Shares” and the Ordinary Shares represented by the Optional ADSs are hereinafter called the “Optional Shares”, and the Firm Shares and the Optional Shares are herein collectively called the “Shares”.


The ADSs are to be issued pursuant to a deposit agreement dated February 9, 2010 and the amendment to the deposit agreement to be dated as of             , 2010, (the deposit agreement and its amendment collectively referred to as “Deposit Agreement”) among the Company, JPMorgan Chase Bank, N.A., as depositary (the “Depositary”), and holders from time to time of the American Depositary Receipts (the “ADRs”) issued by the Depositary and evidencing the ADSs. Each ADS will initially represent the right to receive four Ordinary Shares deposited pursuant to the Deposit Agreement.

It is understood by all the parties that the Underwriters are offering ADSs in the United States and internationally outside of the People’s Republic of China (the “PRC”), which, for purposes of this Agreement only, excludes Taiwan, The Hong Kong Special Administrative Region of the PRC and The Macau Special Administrative Region of the PRC.

 

2


1. (a) Each of the Company, Xiande Li, a founder of the Company and chairman of the Company’s board of directors, Kangping Chen, a founder and a director and chief executive officer of the Company and Xianhua Li, a founder and a director of the Company (each of Xiande Li, Kangping Chen and Xianhua Li, a “Founder”, and collectively, “Founders”), jointly and severally represents and warrants to, and agrees with, each of the Underwriters that:

(i) A registration statement on Form F-1 (File No. 333-164432) (the “Initial Registration Statement”) in respect of the Shares has been filed with the U.S. Securities and Exchange Commission (the “Commission”); the Initial Registration Statement and any post-effective amendment thereto, each in the form heretofore delivered to you, and, excluding exhibits thereto, to you for each of the other Underwriters, have been declared effective by the Commission in such form; other than a registration statement, if any, increasing the size of the offering (a “Rule 462(b) Registration Statement”), filed pursuant to Rule 462(b) under the U.S. Securities Act of 1933, as amended (the “Act”), which became or will become effective upon filing, no other document with respect to the Initial Registration Statement has heretofore been filed with the Commission; and no stop order suspending the effectiveness of the Initial Registration Statement, any post-effective amendment thereto or the Rule 462(b) Registration Statement, if any, has been issued and no proceeding for that purpose has been initiated or, to the Company’s best knowledge after due inquiry, threatened by the Commission (any preliminary prospectus included in the Initial Registration Statement or filed with the Commission pursuant to Rule 424(a) of the rules and regulations of the Commission under the Act is hereinafter called a “Preliminary Prospectus”; the various parts of the Initial Registration Statement and the Rule 462(b) Registration Statement, if any, including all exhibits thereto and including the information contained in the form of final prospectus filed with the Commission pursuant to Rule 424(b) under the Act in accordance with Section 5(a) hereof and deemed by virtue of Rule 430A under the Act to be part of the Initial Registration Statement at the time it was declared effective, each as amended at the time such part of the Initial Registration Statement became effective or such part of the Rule 462(b) Registration Statement, if any, became or hereafter becomes effective, are hereinafter collectively called the “Registration Statement”; the Preliminary Prospectus relating to the Shares and the ADSs that was included in the Registration Statement immediately prior to the Applicable Time (as defined in Section 1(a)(iii) hereof) is hereinafter called the “Pricing Prospectus”; such final prospectus, in the form first filed pursuant to Rule 424(b) under the Act, is hereinafter called the “Prospectus”; and any “issuer free writing prospectus” as defined in Rule 433 under the Act relating to the Shares and the ADSs is hereinafter called an “Issuer Free Writing Prospectus”);

(ii) No order preventing or suspending the use of any Preliminary Prospectus or any Issuer Free Writing Prospectus has been issued by the Commission, and each Preliminary Prospectus, at the time of filing thereof, conformed in all material respects to the requirements of the Act and the rules and regulations of the Commission thereunder, and did not contain an untrue statement of a material fact or omit to state a material fact required to be stated therein or necessary to make the statements therein, in the light of the circumstances under which they were made, not misleading; provided, however, that this representation and warranty shall not apply to any statements or omissions made in reliance upon and in conformity with information furnished in writing to the Company by an Underwriter through the Representative expressly for use therein;

 

3


(iii) For the purposes of this Agreement, the “Applicable Time” is         :             m (New York City time) on the date of this Agreement; the Pricing Prospectus as supplemented by those Issuer Free Writing Prospectuses and other documents listed in Schedule II(b) hereto, taken together (collectively, the “Pricing Disclosure Package”), as of the Applicable Time, did not include any untrue statement of a material fact or omit to state any material fact necessary in order to make the statements therein, in the light of the circumstances under which they were made, not misleading; and each Issuer Free Writing Prospectus listed on Schedule II hereto does not conflict with the information contained in the Registration Statement, the Pricing Prospectus or the Prospectus and each such Issuer Free Writing Prospectus, as supplemented by and taken together with the Pricing Disclosure Package as of the Applicable Time, did not include any untrue statement of a material fact or omit to state any material fact necessary in order to make the statements therein, in the light of the circumstances under which they were made, not misleading; provided, however, that this representation and warranty shall not apply to statements or omissions made in an Issuer Free Writing Prospectus in reliance upon and in conformity with information furnished in writing to the Company by an Underwriter through the Representative expressly for use therein;

(iv) The Registration Statement conforms, and the Prospectus and any further amendments or supplements to the Registration Statement and the Prospectus will conform, in all material respects to the requirements of the Act and the rules and regulations of the Commission thereunder and do not and will not, as of the applicable effective date as to the Registration Statement and any amendment thereto and as of the applicable filing date as to the Prospectus and any amendment or supplement thereto, contain an untrue statement of a material fact or omit to state a material fact required to be stated therein or necessary to make the statements therein not misleading; provided, however, that this representation and warranty shall not apply to any statements or omissions made in reliance upon and in conformity with information furnished in writing to the Company by an Underwriter through the Representative expressly for use therein;

(v) A registration statement on Form F-6 (File No. 333-164523) in respect of the ADSs has been filed with the Commission; such registration statement in the form heretofore delivered to you and, excluding exhibits, to you for each of the other Underwriters, has been declared effective by the Commission in such form; no other document with respect to such registration statement has heretofore been filed with the Commission; no stop order suspending the effectiveness of such registration statement has been issued and no proceeding for that purpose has been initiated or, to the Company’s best knowledge after due inquiry, threatened by the Commission (the various parts of such registration statement, including all exhibits thereto, each as amended at the time such part of the registration statement became effective, being hereinafter called the “ADS Registration Statement”); and the ADS Registration Statement when it became effective conformed, and any further amendments thereto will conform, in all material respects to the requirements of the Act and the rules and regulations of the Commission thereunder, and did not, as of the applicable effective date, contain an untrue statement of a material fact or omit to state a material fact required to be stated therein or necessary to make the statements therein not misleading;

(vi) A registration statement on Form 8-A (File No. 001-34615) in respect of the registration of the Shares and the ADSs under the U.S. Securities Exchange Act of 1934, as amended (the “Exchange Act”), has been filed with the Commission; such registration statement in the form heretofore delivered to you and, excluding exhibits, to you for each of the other Underwriters, has been declared effective by the Commission in such form; no other document with respect to such registration statement has heretofore been filed with the Commission; no stop order suspending the effectiveness of such registration statement has been issued and no proceeding for that purpose has been initiated or, to the Company’s best knowledge after due inquiry, threatened by the Commission (the various parts of such registration statement, including all exhibits thereto, each as amended at the time such part of the registration statement became effective, being hereinafter called the “Form 8-A Registration Statement”); and the Form 8-A Registration Statement when it became effective conformed, and any further amendments thereto will conform, in all material respects to the requirements of the Exchange Act and the rules and regulations of the Commission thereunder, and did not and will not, as of the applicable effective date, contain an untrue statement of a material fact or omit to state a material fact required to be stated therein or necessary to make the statements therein not misleading;

 

4


(vii) Neither the Company nor any of its subsidiaries has sustained since the date of the latest audited financial statements included in the Pricing Prospectus any material loss or interference with its business from fire, explosion, flood or other calamity, whether or not covered by insurance, or from any labor dispute or court or governmental action, order or decree, otherwise than as set forth or contemplated in the Pricing Prospectus; and, since the respective dates as of which information is given in the Registration Statement and the Pricing Prospectus, there has not been any change in the share capital, material change in short-term debt or long-term debt of the Company or any of its subsidiaries or any material adverse change, or any development involving a prospective material adverse change, in or affecting the general affairs, management, financial position, shareholders’ equity, results of operations or prospects of the Company and its subsidiaries, taken as a whole, (a “Material Adverse Effect”), otherwise than as set forth or contemplated in the Pricing Prospectus;

(viii) The Company and its subsidiaries have good and marketable title to all real property and good and marketable title to all personal property owned by them, in each case free and clear of all liens, encumbrances and defects except such as are described in the Pricing Prospectus or such as do not materially affect the value of such property and do not interfere with the use made and proposed to be made of such property by the Company and its subsidiaries; and any real property and buildings held under lease by the Company and its subsidiaries are held by them under valid, subsisting and enforceable leases with such exceptions as are not material and do not interfere with the use made and proposed to be made of such property and buildings by the Company and its subsidiaries;

(ix) The Company has been duly incorporated and is validly existing as a company in good standing under the laws of the Cayman Islands, with corporate power and authority to own, lease and operate its properties and conduct its business as described in the Pricing Prospectus, and has been duly qualified as a foreign corporation for the transaction of business and is in good standing under the laws of each other jurisdiction in which it owns or leases properties or conducts any business so as to require such qualification, or is subject to no material liability or disability by reason of the failure to be so qualified in any such jurisdiction; and each subsidiary of the Company has been duly incorporated and is validly existing as a corporation in good standing under the laws of its jurisdiction of incorporation, with corporate power and authority to own, lease and operate its properties and conduct its business as described in the Pricing Prospectus, and has been duly qualified as a foreign corporation for the transaction of business and is in good standing under the laws of each other jurisdiction in which it owns or leases properties or conducts any business so as to require such qualification, or is subject to no material liability or disability by reason of the failure to be so qualified in any such jurisdiction; as of the date of this Agreement, except for Paker Technology Limited (“Paker”), Jinko Solar Co., Ltd. (“Jiangxi Jinko”), Zhejiang Jinko Solar Co., Ltd. (“Zhejiang Jinko”), JinkoSolar International Limited, JinkoSolar GmbH and Jinko Solar Import and Export Co., Ltd., the Company does not own or control, directly or indirectly, any equity or other ownership interest in any corporation, partnership, joint venture or any other person;

 

5


(x) The Company and its subsidiaries maintain insurance covering their respective properties as the Company reasonably deems adequate and as is customary for companies engaged in similar businesses; such insurance insures against losses and risks to an extent which is adequate in accordance with customary industry practice to protect the Company and its subsidiaries and their respective businesses; all such insurance is fully in force on the date hereof and will be fully in force at the time of purchase and each additional time of purchase, if any; neither the Company nor any of its subsidiaries has reason to believe that it will not be able to renew any such insurance as and when such insurance expires; and there is no material insurance claim made by or against the Company or any of its subsidiaries, pending, threatened or outstanding and no facts or circumstances exist which would reasonably be expected to give rise to any such claim and all due premiums in respect thereof have been paid;

(xi) Except as disclosed in the Pricing Prospectus, each of the Company and its subsidiaries has all necessary licenses, franchises, concessions, consents, authorizations, approvals, orders, certificates and permits of and from, and has made all necessary declarations and filings with, all governmental agencies to own, lease, license and use its properties, assets and conduct its business in the manner described in the Pricing Prospectus except where the lack of which would not, individually or in the aggregate, have a Material Adverse Effect, and such licenses, franchises, concessions, consents, authorizations, approvals, orders, certificates or permits contain no material restrictions or conditions not described in the Pricing Prospectus; and neither the Company nor any of its subsidiaries has a reasonable basis to believe that any regulatory body is considering modifying, suspending or revoking any such licenses, consents, authorizations, approvals, orders, certificates or permits, and the Company and its subsidiaries are in compliance with the provisions of all such licenses, consents, authorizations, approvals, orders, certificates or permits;

(xii) Neither the Company nor any of its subsidiaries has sent or received any communication regarding termination of, or intent not to renew, any of the contracts or agreements referred to or described in the Pricing Prospectus, the Prospectus or any Issuer Free Writing Prospectus, or referred to or described in, or filed as an exhibit to, the Registration Statement, and no such termination or non-renewal has been threatened by the Company or any of its subsidiaries or any other party to any such contract or agreement;

(xiii) Except as disclosed in the Pricing Prospectus, neither the Company nor any of its subsidiaries is (A) in breach of or in default under any laws, regulations, rules, orders, decrees, guidelines or notices of the PRC, the Cayman Islands, Germany, Hong Kong or any other jurisdiction where it was incorporated or operates, (B) in breach of or in default under any approval, consent, waiver, authorization, exemption, permission, endorsement or license granted by any court or governmental agency or body or any stock exchange authorities (“Governmental Agency”) in the PRC, the Cayman Islands, Germany, Hong Kong or any other jurisdiction where it was incorporated or operates, (C) in violation of its constituent documents or (D) in default in the performance or observance of any obligation, agreement, covenant or condition contained in any indenture, mortgage, deed of trust, loan agreement, lease or other agreement or instrument to which it is a party or by which it or any of its properties may be bound except, with respect to (D), where any default would not, individually or in the aggregate, reasonably be expected to have a Material Adverse Effect;

 

6


(xiv) The Company has an authorized and paid-in capitalization as set forth in the Pricing Prospectus, and all of the issued share capital of the Company have been duly and validly authorized and issued, are fully paid and non-assessable and conform in all material respects to the description of the Ordinary Shares contained in the Pricing Disclosure Package and the Prospectus; except as disclosed in the Pricing Prospectus, all of the issued share capital or registered capital, as the case may be, of each of the subsidiaries of the Company have been duly and validly authorized and issued, and are fully paid and, to the extent applicable under the laws of their respective jurisdiction of incorporation, non-assessable; all of the issued share capital or equity interest, as the case may be, of each of the subsidiaries are owned directly or indirectly by the Company, free and clear of all liens, encumbrances, equities or claims; the holders of outstanding Ordinary Shares are not entitled to preemptive or other rights to acquire the Shares or the ADSs; there are no outstanding securities convertible into or exchangeable for, or warrants, rights or options to purchase from the Company, or obligations of the Company to issue, Ordinary Shares or any other class of share capital of the Company except as set forth in the Pricing Prospectus under the captions “Capitalization”, “Management – Share Incentive Plan” and “Related Party Transactions”; the Shares, when issued and delivered against payment therefor, may be freely deposited by the Company with the Depositary against issuance of ADRs evidencing ADSs; the ADSs, when issued and delivered against payment therefor, will be freely transferable by the Company to or for the account of the several Underwriters and (to the extent described in the Pricing Prospectus) the initial purchasers thereof; and there are no restrictions on subsequent transfers of the ADSs under the laws of the Cayman Islands, the PRC or the United States except as described in the Pricing Prospectus under the captions “Description of Share Capital”, “Description of American Depositary Shares” and “Shares Eligible for Future Sale”; there are no outstanding securities convertible into or exchangeable for, or warrants, rights or options to purchase from any subsidiary of the Company, or obligation of any subsidiary of the Company to issue, equity shares or any other class of share capital of any subsidiary of the Company;

(xv) Except as disclosed in the Pricing Prospectus, (A) no person has any preemptive rights, resale rights, rights of first refusal or other rights to purchase any Ordinary Shares or shares of any other share capital of or other equity interests in the Company and (B) no person has the right to act as an underwriter or as a financial advisor to the Company in connection with the offer and sale of the ADSs;

(xvi) The Shares to be issued underlying the ADSs to be sold by the Company to the Underwriters hereunder have been duly and validly authorized and, when issued and delivered against payment therefor as provided herein, will be duly and validly issued and fully paid and non-assessable and will conform in all material respects to the description of the Ordinary Shares contained in the Pricing Prospectus and the Prospectus;

 

7


(xvii) All of the Ordinary Shares issuable upon the mandatory conversion of the outstanding Series A Preferred Shares and Series B Preferred Shares (collectively, the “Preferred Shares”) as described in the Pricing Prospectus have been duly and validly authorized and reserved for issuance; and, prior to or concurrently with the First Time of Delivery (as defined in Section 4(a) hereof), all of the Preferred Shares will be converted into Ordinary Shares and all such Ordinary Shares will be duly and validly issued and fully paid and non-assessable;

(xviii) Except as disclosed in the Pricing Prospectus, there are no contracts, agreements or understandings between the Company and any person granting such person the right to require the Company to file a registration statement under the Act with respect to any securities of the Company owned or to be owned by such person or to require the Company to include such securities in the securities registered pursuant to the Registration Statement, the ADS Registration Statement or in any securities being registered pursuant to any other registration statement filed by the Company under the Act;

(xix) This Agreement has been duly authorized, executed and delivered by the Company and the Founders and constitutes a valid and legally binding agreement of the Company and the Founders, enforceable in accordance with its terms, subject, as to enforceability, to bankruptcy, insolvency, reorganization and similar laws of general applicability relating to or affecting creditors’ rights and to general equity principles;

(xx) The Deposit Agreement has been duly authorized and, when executed and delivered by the Company and the Depositary, will constitute a valid and legally binding agreement of the Company, enforceable in accordance with its terms, subject, as to enforceability, to bankruptcy, insolvency, reorganization and similar laws of general applicability relating to or affecting creditors’ rights and to general equity principles; upon issuance by the Depositary of ADRs evidencing ADSs and the deposit of Shares in respect thereof in accordance with the provisions of the Deposit Agreement, such ADRs will be duly and validly issued and the persons in whose names the ADRs are registered will be entitled to the rights specified therein and in the Deposit Agreement; and the Deposit Agreement and the ADRs conform in all material respects to the descriptions thereof contained in the Prospectus;

(xxi) All dividends and other distributions declared and payable on the share capital of the Company and Paker, as the case may be, may under the laws and regulations of the Cayman Islands and Hong Kong, respectively, be paid to the Depositary or to the Company, as the case may be, and all such dividends and other distributions will not be subject to withholding or other taxes under such laws and regulations and are otherwise free and clear of any other tax, withholding or deduction in the Cayman Islands and Hong Kong, respectively, and without the necessity of obtaining any consents, approvals, authorizations, orders, registrations, clearances or qualifications of or with any Governmental Agency having jurisdiction over the Company or Paker or any of their subsidiaries or any of their respective properties (hereinafter referred to as “Governmental Authorizations”) in the Cayman Islands and Hong Kong, respectively;

 

8


(xxii) All dividends and other distributions declared and payable on the equity interest of JinkoSolar International Limited and JinkoSolar GmbH may under the current laws and regulations of Hong Kong and Germany be freely transferred out of Hong Kong and Germany, as applicable, and may be paid in U.S. dollars, without the necessity of obtaining any Governmental Authorization in Hong Kong and Germany, as applicable, and all dividends and other distributions declared and payable on the equity interest of JinkoSolar International Limited will not be subject to withholding or other taxes under the laws and regulations of Hong Kong and are otherwise free and clear of any other tax, withholding or deduction in Hong Kong;

(xxiii) Except as disclosed in the Pricing Prospectus, all dividends and other distributions declared and payable on the equity interest of Jiangxi Jinko and Zhejiang Jinko may under the current laws and regulations of the PRC be freely transferred out of the PRC and may be paid in U.S. dollars, subject to the successful completion of PRC formalities required for such remittance, and all such dividends and other distributions will not be subject to withholding or other taxes under the laws and regulations of the PRC and are otherwise free and clear of any other tax, withholding or deduction in the PRC, and without the necessity of obtaining any Governmental Authorization in the PRC;

(xxiv) The issue and sale of the Shares to be sold by the Company hereunder and the deposit of the Shares being deposited with the Depositary against issuance of the ADRs evidencing the ADSs and the execution and delivery of this Agreement and the compliance by the Company with all of the provisions of this Agreement and the Deposit Agreement and the consummation of the transactions herein and therein contemplated will not (A) conflict with or result in a breach or violation of any of the terms or provisions of, or constitute a default under, or result in the creation or imposition of any lien, charge or encumbrance upon any property or assets of the Company or any of its subsidiaries pursuant to, any indenture, mortgage, deed of trust, loan agreement or other agreement or instrument to which the Company or any of its subsidiaries is a party or by which the Company or any of its subsidiaries is bound or to which any of the property or assets of the Company or any of its subsidiaries is subject, (B) result in any violation of the provisions of the constituent documents of the Company or any of its subsidiaries or (C) result in any violation of any statute or any order, rule or regulation of any Governmental Agency having jurisdiction over the Company or any of its subsidiaries or any of their properties or assets;

(xxv) No consent, approval, authorization, order, registration, clearance or qualification of or with any Governmental Agency is required for the issue and sale of the Shares or the ADSs, for the deposit of the Shares being deposited with the Depositary against issuance of ADRs evidencing the ADSs to be delivered or the consummation by the Company of the transactions contemplated by this Agreement and the Deposit Agreement, except (A) the registration under the Act of the Shares and the ADSs and listing of the ADSs on The New York Stock Exchange (the “NYSE”), (B) such Governmental Authorizations as have been duly obtained and are in full force and effect and copies of which have been furnished to you and (C) such Governmental Authorizations as may be required under state securities or Blue Sky laws or any laws of jurisdictions outside the Cayman Islands, Germany, Hong Kong and the United States in connection with the purchase and distribution of the Shares and ADSs by or for the respective accounts of the several Underwriters;

(xxvi) The ADSs have been approved for listing on the NYSE, subject to notice of issuance;

(xxvii) Neither the Company nor any of its subsidiaries is engaged in any trading activities involving commodity contracts or other trading contracts which are not currently traded on a securities or commodities exchange and for which the market value cannot be determined;

(xxviii) No stamp or other issuance or transfer taxes or duties and no capital gains, income, withholding or other taxes are payable by or on behalf of the Underwriters to the government of the Cayman Islands, Germany, Hong Kong or the PRC, or any political subdivision or taxing authority thereof or therein in connection with: (A) the deposit with the Depositary of the Shares by the Company against the issuance of ADRs evidencing the ADSs, (B) the sale and delivery by the Company of the Shares and the ADSs to or for the respective accounts of the several Underwriters or (C) the sale and delivery by the Underwriters of the Shares and the ADSs to the initial purchasers thereof in the manner contemplated by this Agreement;

 

9


(xxix) Neither the Company nor any of its subsidiaries has taken, directly or indirectly, any action which was designed to or which has constituted or which might reasonably be expected to cause or result in stabilization or manipulation of the price of any security of the Company to facilitate the sale or resale of the Shares and the ADSs;

(xxx) The statements set forth in the Pricing Prospectus under the captions “Description of Share Capital” and “Description of American Depositary Shares”, insofar as they purport to constitute a summary of the terms of the Ordinary Shares and the ADSs, respectively, and under the captions “Taxation” and “Underwriting”, insofar as they purport to describe the provisions of the laws and documents referred to therein, constitute accurate, complete and fair summaries regarding the matters described therein in all material respects;

(xxxi) Other than as set forth in the Pricing Prospectus, there are no legal, arbitration or governmental proceedings or regulatory or administrative inquiries or investigations pending to which the Founders, the Company or any of its subsidiaries is a party or of which any property of the Founders, the Company or any of its subsidiaries is the subject (A) that, if determined adversely to the Founders, the Company or any of its subsidiaries, would individually or in the aggregate have a Material Adverse Effect; or (B) that are required to be described in the Registration Statement or the Pricing Prospectus and are not so described; and except as set forth in the Pricing Prospectus, to the Company’s and each Founder’s best knowledge after due inquiry, no such proceedings are threatened or contemplated by governmental authorities or threatened by others;

(xxxii) The Company is not and, after giving effect to the offering and sale of the Shares and ADSs and the application of the proceeds thereof, will not be an “investment company”, as such term is defined in the U.S. Investment Company Act of 1940, as amended (the “Investment Company Act”);

(xxxiii) At the time of filing the Initial Registration Statement, the Company was not and is not an “ineligible issuer,” as such term is defined in Rule 405 under the Act;

(xxxiv) Each of this Agreement and the Deposit Agreement is in proper form to be enforceable against the Company in the Cayman Islands in accordance with its terms; to ensure the legality, validity, enforceability or admissibility into evidence in the Cayman Islands of this Agreement or the Deposit Agreement, it is not necessary that this Agreement or the Deposit Agreement be filed or recorded with any court or other authority in the Cayman Islands or that any stamp or similar tax in the Cayman Islands be paid on or in respect of this Agreement, the Deposit Agreement or any other documents to be furnished hereunder;

 

10


(xxxv) The Registration Statement, the Pricing Prospectus, the Prospectus, any Issuer Free Writing Prospectus, the Form 8-A Registration Statement and the ADS Registration Statement and the filing of the Registration Statement, the Pricing Prospectus, the Prospectus, any Issuer Free Writing Prospectus, the Form 8-A Registration Statement and the ADS Registration Statement with the Commission have been duly authorized by and on behalf of the Company, and the Registration Statement, the Form 8-A Registration Statement and the ADS Registration Statement have been duly executed pursuant to such authorization by and on behalf of the Company;

(xxxvi) There are no contracts or documents, or amendments thereto or updates thereof, which are required to be described in the Registration Statement, the Pricing Prospectus, the Pricing Disclosure Package or the Prospectus or to be filed as exhibits to the Registration Statement which have not been so described and filed as required;

(xxxvii)(A) Each of the Company and its subsidiaries owns, possesses, licenses or has other rights to use the patents and patent applications, copyrights, trademarks, service marks, trade names, Internet domain names, technology, know-how (including trade secrets and other unpatented and/or unpatentable proprietary rights) and other intellectual property necessary or used in any material respect to conduct its business in the manner in which it is being conducted and in the manner in which it is contemplated as set forth in the Pricing Prospectus (collectively, the “Intellectual Property”); (B) none of the Intellectual Property is unenforceable or invalid; (C) neither the Company nor any of its subsidiaries has received any notice of violation or conflict with (and neither the Company nor any of its subsidiaries knows of any basis for violation or conflict with) rights of others with respect to the Intellectual Property; (D) there are no pending or, to the Company’s and each Founder’s best knowledge after due inquiry, threatened actions, suits, proceedings or claims by others that allege the Company or any of its subsidiaries is infringing any patent, trade secret, trademark, service mark, copyright or other intellectual property or proprietary right; (E) the discoveries, inventions, products or processes of the Company and its subsidiaries referenced in the Pricing Prospectus do not violate or conflict with any intellectual property or proprietary right of any third person, or any discovery, invention, product or process that is the subject of a patent application filed by any third person; (F) no officer, director or employee of the Company or any of its subsidiaries is in or has ever been in violation of any term of any patent non-disclosure agreement, invention assignment agreement, or similar agreement relating to the protection, ownership, development use or transfer of the Intellectual Property or, to the Company’s and each Founder’s best knowledge after due inquiry, any other intellectual property, except where any violation would not, individually or in the aggregate, have a Material Adverse Effect; (G) the Company and its subsidiaries are not in breach of, and have complied in all material respects with all terms of, any license or other agreement relating to the Intellectual Property; to the extent any Intellectual Property is sublicensed to the Company or any of its subsidiaries by a third party, such sublicensed rights shall continue in full force and effect if the principal third party license terminates for any reason; and there are no contracts or other documents related to the Intellectual Property required to be described in or filed as an exhibit to the Registration Statement other than those described in or filed as an exhibit to the Registration Statement; (H) except as disclosed in the Pricing Prospectus, neither the Company nor any of its subsidiaries is subject to any non-competition or other similar restrictions or arrangements relating to any business or service anywhere in the world; (I) each of the Company and its subsidiaries has taken all necessary and appropriate steps to protect and preserve the confidentiality of applicable Intellectual Property (“Confidential Information”); (J) all use or disclosure of Confidential Information owned by the Company or its subsidiaries by or to a third party has been pursuant to a written agreement between the Company, its subsidiaries and such third party; and all use or disclosure of Confidential Information not owned by the Company or its subsidiaries has been pursuant to the terms of a written agreement between the Company, its subsidiaries, and the owner of such Confidential Information, or is otherwise lawful;

 

11


(xxxviii) The pending patent applications as set forth in the Pricing Prospectus (the “Pending Patents”) are being diligently prosecuted by the Company and its subsidiaries; to the Company’s best knowledge after due inquiry, there is no existing patent or published patent application that would interfere, conflict with or otherwise adversely affect the validity, enforcement or scope of the Pending Patents if claims of such Pending Patents were issued in substantially the same form as currently written; no security interests or other liens have been created with respect to the Pending Patents; and the Pending Patents have not been exclusively licensed to another entity or person;

(xxxix) The Company does not believe that it was a Passive Foreign Investment Company (“PFIC”) within the meaning of Section 1297(a) of the United States Internal Revenue Code of 1986, as amended, for the taxable year ended December 31, 2009, does not expect to be a PFIC in the current taxable year ending December 31, 2010 and will use its best efforts not to take any action that would result in the Company becoming a PFIC in the future;

(xl) Except as set forth in the Registration Statement and the Pricing Prospectus, the Company has not sold, issued or distributed any shares during the six-month period preceding the date hereof, including any sales pursuant to Rule 144A, Regulation D or Regulation S promulgated under the Act, other than shares issued pursuant to employee benefit plans, qualified share option plans or other employee compensation plans or pursuant to outstanding options, rights or warrants;

(xli) The Company is a “foreign private issuer” within the meaning of Rule 405 under the Act;

(xlii) PricewaterhouseCoopers Zhong Tian CPAs (“PwC”), who have certified certain financial statements of the Company and its subsidiaries, are independent public accountants of the Company as required by the Act and the rules and regulations of the Commission thereunder and are independent in accordance with the requirements of the United States Public Company Accounting Oversight Board;

(xliii) Except as disclosed in the Pricing Prospectus, no material indebtedness (actual or contingent) and no material contract or arrangement is outstanding between the Company or any of its subsidiaries and any director or executive officer of the Company or any of its subsidiaries or any person connected with such director or executive officer (including his/her spouse, infant children, any company or undertaking in which he/she holds a controlling interest); and there are no material relationships or transactions between the Company or any of its subsidiaries on the one hand and its affiliates, officers and directors or their shareholders, customers or suppliers on the other hand which, although required to be disclosed, are not disclosed in the Pricing Prospectus;

 

12


(xliv) The Company maintains a system of internal accounting controls sufficient to provide reasonable assurance that: (A) transactions are executed in accordance with management’s general or specific authorizations; (B) transactions are recorded as necessary to permit preparation of financial statements in conformity with generally accepted accounting principles in the United States (“US GAAP”); (C) access to assets is permitted only in accordance with management’s general or specific authorization; (D) the recorded accountability for assets is compared with existing assets at reasonable intervals and appropriate actions are taken with respect to any differences; and (E) the Company has made and kept books, records and accounts which, in reasonable detail, accurately and fairly reflect the transactions and dispositions of assets of such entity;

(xlv) The Company has established and maintains and evaluates “disclosure controls and procedures” (as such term is defined in Rule 13a-15 and 15d-15 under the Exchange Act) and “internal control over financial reporting” (as such term is defined in Rule 13a-15 and 15d-15 under the Exchange Act); such disclosure controls and procedures are designed to ensure that material information relating to the Company, including its subsidiaries, is made known to the Company’s chief executive officer and chief financial officer by others within those entities, and such disclosure controls and procedures are effective to perform the functions for which they were established; the Company’s independent auditors and the Board of Directors of the Company have been advised of: (A) all significant deficiencies, if any, in the design or operation of internal controls which could adversely affect the Company’s ability to record, process, summarize and report financial data; and (B) all fraud, if any, whether or not material, that involves management or other employees who have a role in the Company’s internal controls; all material weaknesses, if any, in internal controls have been identified to the Company’s independent auditors; such internal control over financial reporting has been designed by the Company’s chief executive officer and chief financial officer, or under their supervision, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with US GAAP; since the date of the most recent evaluation of such disclosure controls and procedures and internal controls, there have been no significant changes in internal controls or in other factors that could significantly affect internal controls, including any corrective actions with regard to significant deficiencies and material weaknesses; and the Company has taken all necessary actions to ensure that, upon and at all times after the filing of the Registration Statement, the Company and its subsidiaries and their respective officers and directors, in their capacities as such, will be in compliance in all material respects with the applicable provisions of the Sarbanes-Oxley Act of 2002 (the “Sarbanes-Oxley Act”) and the rules and regulations promulgated thereunder;

(xlvi) Except as disclosed in the Pricing Prospectus, neither the Company nor any of its subsidiaries has any material obligation to provide retirement, healthcare, death or disability benefits to any of the present or past employees of the Company or any of its subsidiaries, or to any other person;

 

13


(xlvii) No material labor dispute, work stoppage, slow down or other conflict with the employees of the Company or any of its subsidiaries exists or, to the Company’s best knowledge after due inquiry, is threatened;

(xlviii) The section entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations — Critical Accounting Policies” in the Pricing Prospectus truly, accurately and completely in all material respects describes: (A) accounting policies which the Company believes are the most important in the portrayal of the Company’s financial condition and results of operations and which require management’s most difficult, subjective or complex judgments (“Critical Accounting Policies”); (B) judgments and uncertainties affecting the application of Critical Accounting Policies; and (C) the likelihood that materially different amounts would be reported under different conditions or using different assumptions; and the Company’s Board of Directors and management have reviewed and agreed with the selection, application and disclosure of Critical Accounting Policies and have consulted with its legal counsel and independent accountants with regard to such disclosure;

(xlix) Since the date of the latest audited financial statements included in the Pricing Prospectus, neither the Company nor any of its subsidiaries has: (A) entered into or assumed any contract, (B) incurred or agreed to incur any liability (including any contingent liability) or other obligation, (C) acquired or disposed of or agreed to acquire or dispose of any business or any other asset or (D) assumed or acquired or agreed to assume or acquire any liabilities (including contingent liabilities), that would, in any of clauses (A) through (D) above, be material to the Company and its subsidiaries and that are not otherwise described in the Pricing Prospectus;

(l) The section entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in the Pricing Prospectus accurately and fully describes: (A) all material trends, demands, commitments, events, uncertainties and risks, and the potential effects thereof, that the Company believes would materially affect liquidity, financial condition or results of operations of the Company, and are reasonably likely to occur; and (B) all off-balance sheet transactions, arrangements, and obligations, including, without limitation, relationships with unconsolidated entities that are contractually limited to narrow activities that facilitate the transfer of or access to assets by the Company or any of its subsidiaries, such as structured finance entities and special purpose entities (collectively, “off-balance sheet arrangements”) that are reasonably likely to have a material effect on the liquidity of the Company or any of its subsidiaries or the availability thereof or the requirements of the Company or any of its subsidiaries for capital resources;

(li) Except as disclosed in the Pricing Prospectus, none of the Company or any of its subsidiaries is engaged in any material transactions with its directors, officers, management, shareholders, or any other affiliate, including any person who formerly held a position as directors, officers, managers and/or shareholders, on terms that are not available from unrelated third parties on an arm’s-length basis;

(lii) No holder of any of the Shares when issued and fully paid or the ADSs after the consummation of the transactions contemplated by this Agreement or the Deposit Agreement is or will be subject to any personal liability in respect of any liability of the Company by virtue only of its holding of any such Shares or ADSs; and except as set forth in the Pricing Prospectus, there are no limitations on the rights of holders of the Shares or the ADSs to hold, vote or transfer their securities;

 

14


(liii) The audited consolidated financial statements (and the notes thereto) of the Company included in the Registration Statement, the Pricing Prospectus and the Prospectus comply in all material respects with the applicable requirements of the Act, and fairly present in all material respects the consolidated financial position of the Company as of the dates specified and the consolidated results of operations and changes in consolidated financial position of the Company for the periods specified, and such financial statements have been prepared in conformity with US GAAP applied on a consistent basis throughout the periods presented (other than as described therein); the summary and selected consolidated financial data and the unaudited financial results included in the Registration Statement, the Pricing Prospectus and the Prospectus comply in all material respects with the applicable requirements of the Act, and present fairly the information shown therein and have been compiled on a basis consistent with that of the audited consolidated financial statements included therein;

(liv) The selected preliminary unaudited financial data for the quarterly period ended March 31, 2010 set forth in the Registration Statement, the Pricing Disclosure Package and the Prospectus under the caption “Recent Developments” have been derived from and are consistent with the Company’s consolidated financial statements for the quarterly period ended March 31, 2010 which have been compiled on a basis consistent with that of the Company’s prior audited consolidated financial results and have been reviewed by PwC in accordance with the procedures specified by the Public Company Accounting Oversight Board (United States) for a review of interim financial information as described in SAS No. 100, Interim Financial Information;

(lv) Under the laws of the Cayman Islands, each holder of ADRs evidencing ADSs issued pursuant to the Deposit Agreement shall be entitled, subject to the Deposit Agreement, to seek enforcement of its rights through the Depositary or its nominee registered as representative of the holders of the ADRs in a direct suit, action or proceeding against the Company;

(lvi) All amounts payable by the Company in respect of the ADRs evidencing the ADSs or the underlying Shares shall be made free and clear of and without deduction for or on account of any taxes imposed, assessed or levied by the Cayman Islands or any authority thereof or therein (except such income taxes as may otherwise be imposed by the Cayman Islands on payments hereunder to an Underwriter whose net income is subject to tax by the Cayman Islands or withholding, if any, with respect to any such income tax) nor are any taxes imposed in the Cayman Islands on, or by virtue of the execution or delivery of, such documents;

(lvii) The Company has paid all taxes required to be paid through the date hereof and all returns, reports or filings which ought to have been made by or in respect of the Company and its subsidiaries for taxation purposes as required by the law of the jurisdictions where the Company and its subsidiaries are incorporated, managed or engage in business have been made and all such returns are correct and on a proper basis in all material respects and are not the subject of any dispute with the relevant revenue or other appropriate authorities except as may be being contested in good faith and by appropriate proceedings; the provisions included in the audited consolidated financial statements as set out in the Pricing Prospectus included appropriate provisions required under US GAAP for all taxation in respect of accounting periods ended on or before the accounting reference date to which such audited accounts relate for which the Company was then or might reasonably be expected thereafter to become or have become liable; and neither the Company nor any of its subsidiaries has received notice of any tax deficiency with respect to the Company or any of its subsidiaries;

 

15


(lviii) The Company has provided or made available to you true, correct, and complete copies of all documentation pertaining to any extension of credit in the form of a personal loan made, directly or indirectly, by the Company or any of its subsidiaries to any director or executive officer of the Company or any of its subsidiaries; and since March 31, 2010, the Company has not, directly or indirectly, including through any of its subsidiaries: (A) extended credit, arranged to extend credit, or renewed any extension of credit, in the form of a personal loan, to or for any director or executive officer of the Company or any of its subsidiaries, or to or for any family member or affiliate of any director or executive officer of the Company or any of its subsidiaries; or (B) made any material modification, including any renewal thereof, to any term of any personal loan to any director or executive officer of the Company or any of its subsidiaries, or any family member or affiliate of any director or executive officer, which loan was outstanding on March 31, 2010, that (x) is outstanding on the date hereof and (y) constitutes a violation of any applicable law or regulation;

(lix) Without prejudice to the generality of anything contained herein, all the operating information and data included in the Pricing Prospectus were true and accurate in all material respects as of the Applicable Time and will be true and accurate in all material respects at each Time of Delivery; any statistical, industry-related and market-related data included in the Pricing Prospectus and the Prospectus are based on or derived from sources that the Company believes to be reliable and accurate, and the Company has obtained the written consent for the use of such data from such sources to the extent required;

(lx) The application of the net proceeds from the offering of ADSs, as described in the Pricing Prospectus, will not contravene any provision of any current and applicable laws or the applicable constituent documents of the Company or any of its subsidiaries or contravene the terms or provisions of, or constitute a default under, any indenture, mortgage, deed of trust, loan agreement, note, lease or other agreement or instrument currently binding upon the Company or any of its subsidiaries or any Governmental Authorization applicable to any of the Company or any of its subsidiaries;

(lxi) There are no contracts, agreements or understandings between the Company and any person that would give rise to a valid claim against the Company or any Underwriter for a brokerage commission, finder’s fee or other like payment in connection with the issuance and sale of the ADSs;

(lxii) Under the laws of the Cayman Islands, the courts of the Cayman Islands will recognize and give effect to the choice of law provisions set forth in Section 15 hereof and would recognize as a valid judgment, a final and conclusive judgment in personam obtained in the U.S. courts against the Company to enforce this Agreement under which a sum of money is payable (other than a sum of money payable in respect of multiple damages, taxes or other charges of a like nature or in respect of a fine or other penalty) and would give a judgment based thereon provided that (a) such courts had proper jurisdiction over the parties subject to such judgment; (b) such courts did not contravene the rules of natural justice of the Cayman Islands; (c) such judgment was not obtained by fraud; (d) the enforcement of the judgment would not be contrary to the public policy of the Cayman Islands; (e) no new admissible evidence relevant to the action is submitted prior to the rendering of the judgment by the courts of the Cayman Islands; and (f) there is due compliance with the correct procedures under the laws of the Cayman Islands; under the laws of the PRC, the choice of law provisions set forth in Section 15 hereof will be recognized by the courts of the PRC and any judgment obtained in any New York Court (as defined below) arising out of or in relation to the obligations of the Company under this Agreement will be recognized in PRC courts subject to the applicable provisions of the Civil Procedure Law of the PRC relating to the enforceability of foreign judgments;

 

16


(lxiii) None of the Company, any of its subsidiaries, any director, officer, agent, employee or other person associated with or acting on behalf of the Company or any of its subsidiaries, has used any corporate funds for any unlawful contribution, gift, entertainment or other unlawful expenses relating to a political activity, made any direct or indirect unlawful payment to any foreign or domestic government official or employee from corporate funds; violated or is in violation of any provision of the U.S. Foreign Corrupt Practices Act of 1977; or made any unlawful bribe, payoff, influence payment, kickback, payment or rebate;

(lxiv) The operations of the Company and its subsidiaries are and have been conducted at all times in compliance with the money laundering laws and statutes of all applicable jurisdictions, the rules and regulations thereunder and any related or similar rules, regulations or guidelines, issued, administered or enforced by any governmental agency (collectively, the “Money Laundering Laws”); and no action, suit or proceeding by or before any court or governmental agency, authority or body or any arbitrator or non-governmental authority involving the Company or any of its subsidiaries with respect to the Money Laundering Laws is pending or, to the Company’s and each Founder’s best knowledge after due inquiry, threatened;

(lxv) The descriptions of the events and transactions set forth in the Pricing Prospectus under the caption “Risk Factors—Risks Related to Doing Business in China—If we were required to obtain the prior approval of the PRC Ministry of Commerce, or MOFCOM, for or in connection with our corporate restructuring in 2007 and 2008, our failure to do so could have a material adverse effect on our business, operating results and trading price of our ADSs,” “Risk Factors—Risks Related to Doing Business in China—If we were required to obtain the prior approval of the China Securities Regulatory Commission, or CSRC, for or in connection with this offering and the listing of our ADSs on the NYSE, our failure to do so could cause the offering to be delayed or cancelled,” “Our Corporate History and Structure” and “Related Party Transactions—Restructuring” (the “Restructuring and Financing Activities”) constitute accurate, complete and fair summaries regarding the matters described therein in all material respects, and nothing has been omitted from such summaries which would make the same misleading in any material respect;

(lxvi) Except as disclosed in the Pricing Prospectus, the Restructuring and Financing Activities have been duly authorized and do not (A) contravene any provision of the PRC Mergers and Acquisitions Rules (as defined below) or other applicable law or statute, rule or regulation of any Governmental Agency having jurisdiction over the Company or any of its subsidiaries or any of their properties (including but not limited to the Ministry of Commerce, the State Administration of Industry and Commerce and the State Administration of Foreign Exchange of the PRC), (B) contravene the articles of association, business license or other constituent documents of the Company or any of its subsidiaries, or (C) conflict with or result in a breach or violation of any of the terms or provisions of, or constitute a default under, any license, indenture, mortgage, deed of trust, loan agreement, note, lease or other agreement or instrument to which the Company or any of its subsidiaries is a party or by which the Company or any of its subsidiaries is bound or to which any of the property or assets of the Company or any of its subsidiaries is subject except, with respect to (C), where any conflict, breach or violation would not, individually or in the aggregate, result in a Material Adverse Effect;

 

17


(lxvii) Except as disclosed in the Pricing Prospectus, all Governmental Authorizations required in connection with the Restructuring and Financing Activities have been made or unconditionally obtained in writing, and no such Governmental Authorization has been withdrawn or is subject to any condition precedent which has not been fulfilled or performed;

(lxviii) Each of the Company, each of the Founders and each of the Company’s directors that signed the Initial Registration Statement is aware of and has been advised as to the content of the Rules on Mergers and Acquisitions of Domestic Enterprises by Foreign Investors (the “PRC Mergers and Acquisitions Rules”) jointly promulgated by the Ministry of Commerce, the State Assets Supervision and Administration Commission, the State Tax Administration, the State Administration of Industry and Commerce, the China Securities Regulatory Commission (the “CSRC”) and the State Administration of Foreign Exchange of the PRC on August 8, 2006, as amended on June 22, 2009, including the relevant provisions thereof, which purport to require an offshore special purpose vehicle (an “SPV”) which is controlled by PRC residents for the purpose of listing its rights and interests in a PRC domestic enterprise on an overseas securities exchange through the listing of the SPV’s shares, to obtain approval from the CSRC prior to the public listing and trading of its securities on such overseas securities exchange; the Company has received legal advice specifically with respect to the PRC Mergers and Acquisitions Rules from its PRC counsel and the Company understands such legal advice, which legal advice includes but is not limited to the memorandum dated March 31, 2009 and issued by the Company’s PRC counsel addressing the compliance with the PRC Mergers and Acquisitions Rules (the “PRC Mergers and Acquisitions Rules Memorandum”); the Company has fully communicated such legal advice from its PRC counsel to each of its directors that signed the Initial Registration Statement and each director has confirmed that he or she understands such legal advice; each director of the Company that signed the Initial Registration Statement has received legal advice to his or her satisfaction with respect to the PRC Mergers and Acquisitions Rules and his or her fiduciary duties as a director of the Company in respect of the PRC Mergers and Acquisitions Rules from his or her PRC legal counsel or has declined to obtain such advice after being offered by the Company for the Company to bear the cost of any such advice; the Company and each director of the Company that signed the Initial Registration Statement understand the potential personal liability to which each director of the Company that signed the Initial Registration Statement and the executive officers of the Company may be subject in the event that the offering and sales of the Shares and ADSs as contemplated in this Agreement or the listing and trading of the ADSs on the NYSE were deemed not to be in compliance with the PRC Mergers and Acquisitions Rules;

(lxix) Except as disclosed in the Pricing Prospectus, the issuance and sale of the Shares and the ADSs, the listing and trading of the ADSs on the NYSE or the consummation of the transactions contemplated by this Agreement and the Deposit Agreement is not and will not be, as of the date hereof or at each Time of Delivery, adversely affected by the PRC Mergers and Acquisitions Rules or any official clarifications, guidance, interpretations or implementation rules in connection with or related to the PRC Mergers and Acquisitions Rules (collectively, the “PRC Mergers and Acquisitions Rules and Related Clarifications”);

 

18


(lxx) Except as disclosed in the Pricing Prospectus, as of the date of the Pricing Prospectus and as of the date hereof, the PRC Mergers and Acquisitions Rules did not and do not apply to the issuance and sale of the Shares and the ADSs, the listing and trading of the ADSs on the NYSE, or the consummation of the transactions contemplated by this Agreement and the Deposit Agreement;

(lxxi) Each of the Founders, the Company and its subsidiaries that were incorporated outside of the PRC has taken, or is in the process of taking, all reasonable steps to comply with, and to ensure compliance by each of the Company’s and such subsidiary’s shareholders, option holders, directors, officers and employees that is, or is directly or indirectly owned or controlled by, a PRC resident or citizen with any applicable rules and regulations of the relevant PRC government agencies (including but not limited to the Ministry of Commerce, the National Development and Reform Commission and the State Administration of Foreign Exchange) relating to overseas investment by PRC residents and citizens or overseas listing by offshore special purpose vehicles controlled directly or indirectly by PRC companies and individuals, such as the Company (the “PRC Overseas Investment and Listing Regulations”), including, without limitation, requesting each shareholder, option holder, director, officer and employee that is, or is directly or indirectly owned or controlled by, a PRC resident or citizen to complete any registration and other procedures required under applicable PRC Overseas Investment and Listing Regulations;

(lxxii)(i) Neither the Company nor any of its subsidiaries, affiliates, employees, agents, directors or officers: (A) does, or plans to do, any business with or involving the government of, or any person or project located in, any country targeted by any of the economic sanctions promulgated by any Executive Order issued by the President of the United States or administered by the United States Treasury Department’s Office of Foreign Assets Control (the “OFAC”); or (B) supports or facilitates, or plans to support or facilitate, or otherwise is involved with, any such business or project, in each case other than as permitted under such economic sanctions; (ii) the Company is not controlled (within the meaning of the Executive Orders or regulations promulgating such economic sanctions or the laws authorizing such promulgation) by any such government or person; (iii) the proceeds from the offering of the ADSs contemplated hereby will not be used to fund any operations in, to finance any investments, projects or activities in, or to make any payments to, any country, or to make any payments to, or finance any activities with, any person targeted by any of such economic sanctions; and (iv) the Company maintains and has implemented adequate internal controls and procedures to monitor and audit transactions that are reasonably designed to detect and prevent any use of the proceeds from the offering of the ADSs contemplated hereby that is inconsistent with any of the Company’s representations and obligations under clause (iii) of this paragraph;

(lxxiii) Neither the Company nor any of its subsidiaries, affiliates, employees, agents, directors or officers does any business with the government of Cuba or with any person or affiliate located in Cuba within the meaning of Section 517.075, Florida Statutes;

 

19


(lxxiv) Except as disclosed in the Pricing Prospectus, the Company and its subsidiaries and their respective properties, assets and operations are in compliance with and hold all permits, authorizations and approvals required under Environmental Laws (as defined below); there are no past, present or reasonably anticipated future events, conditions, circumstances, activities, practices, actions, omissions or plans that could reasonably be expected to give rise to any material costs or liabilities to the Company or any of its subsidiaries under, or to interfere with or prevent compliance by the Company or any of its subsidiaries with, Environmental Laws; none of the Company and its subsidiaries (A) is the subject of any investigation, (B) has received any notice or claim, (C) is a party to or affected by any pending or threatened action, suit or proceeding, (D) is bound by any judgment, decree or order or (E) has entered into any agreement, in each case relating to any alleged violation of any Environmental Law or any actual or alleged release or threatened release or cleanup at any location of any Hazardous Materials (as defined below) (as used herein, “Environmental Law” means any national, provincial, municipal or other local or foreign law, statute, ordinance, rule, regulation, order, notice, directive, decree, judgment, injunction, permit, license, authorization or other binding requirement, or common law, relating to health, safety or the protection, cleanup or restoration of the environment or natural resources, including those relating to the distribution, processing, generation, treatment, storage, disposal, transportation, other handling or release or threatened release of Hazardous Materials, and “Hazardous Materials” means any material (including, without limitation, pollutants, contaminants, hazardous or toxic substances or wastes) that is regulated by or may give rise to liability under any Environmental Law);

(lxxv) In the ordinary course of their business, the Company and each of its subsidiaries conduct periodic reviews of the effect of the Environmental Laws on their respective businesses, operations and properties, in the course of which they identify and evaluate associated costs and liabilities (including, without limitation, any capital or operating expenditures required for cleanup, closure of properties or compliance with the Environmental Laws or any permit, license or approval, any related constraints on operating activities and any potential liabilities to third parties);

(lxxvi) Neither the Company nor any of its subsidiaries has entered into any memorandum of understanding, letter of intent, definitive agreement or any similar agreements with respect to a merger or consolidation or a material acquisition or disposition of assets, technologies, business units or businesses;

(lxxvii) There are no affiliations or associations between (A) any member of the Financial Industry Regulatory Authority, Inc. (“FINRA”) and (B) the Company or any of the Company’s officers, directors or 5% or greater security holders or any beneficial owner of the Company’s unregistered equity securities that were acquired at any time on or after the 180th day immediately preceding the date the Registration Statement was initially filed with the Commission;

(lxxviii) There are no business relationships or related-party transactions involving the Company or any of its subsidiaries or any other person required to be described in the Registration Statement, each Preliminary Prospectus, the Pricing Prospectus or the Prospectus which have not been described as required;

 

20


(lxxix) Each “forward-looking statement” (within the meaning of Section 27A of the Act or Section 21E of the Exchange Act) contained in the Registration Statement, each Preliminary Prospectus, the Pricing Prospectus, the Prospectus and each Issuer Free Writing Prospectus, if any, has been made or reaffirmed with a reasonable basis and in good faith; and

(lxxx) The Company has not taken any action, nor will the Company take any action, to request or cause, or otherwise facilitate or agree to, directly or indirectly, any of its directors or executive officers to (i) approach clients, customers or contacts of any of such director’s or executive officer’s former employers, or (ii) seek, directly or indirectly, by the offer of alternative employment or other inducement whatsoever, to solicit the services of any employee of any of such director’s or executive officer’s former employers, in each case in violation of any non-competition agreement between such director or officer and such former employer; to the Company’s and each Founder’s best knowledge after due inquiry, none of its directors or executive officers has taken or plans to take any actions described in (i) and (ii) above in violation of any such non-competition agreement.

In addition, any certificate signed by any officer of the Company or any of its subsidiaries or by the Founders and delivered to the Underwriters or counsel for the Underwriters in connection with the offering of the ADSs shall be deemed to be a representation and warranty by the Company or the Founders, as to matters covered thereby, to each of the Underwriters.

2. Subject to the terms and conditions herein set forth, (a) the Company agrees to issue and/or sell to each of the Underwriters, and each of the Underwriters agrees, severally and not jointly, to purchase from the Company, at a purchase price per ADS of US$            , the number of Firm ADSs (to be adjusted by you so as to eliminate fractional shares) determined by multiplying the aggregate number of Firm ADSs to be sold by the Company by a fraction, the numerator of which is the aggregate number of Firm ADSs to be purchased by such Underwriters as set forth opposite the name of such Underwriter in Schedule I hereto and the denominator of which is the aggregate number of Firm ADSs to be purchased by all of the Underwriters from the Company hereunder and (b) in the event and to the extent that the Underwriters shall exercise the election to purchase Optional ADSs as provided below, the Company agrees to issue and/or sell to each of the Underwriters, and each of the Underwriters agrees, severally and not jointly, to purchase from the Company, at the purchase price per ADS set forth in clause (a) of this Section 2, that portion of the number of Optional ADSs as to which such election shall have been exercised (to be adjusted by you so as to eliminate fractional shares) determined by multiplying such number of Optional ADSs by a fraction, the numerator of which is the maximum number of Optional ADSs which such Underwriter is entitled to purchase as set forth opposite the name of such Underwriter in Schedule I hereto and the denominator of which is the maximum number of Optional ADSs that all of the Underwriters are entitled to purchase hereunder.

The Company hereby grants to the Underwriters the right, exercisable by the Underwriters at one or more times, to purchase at their election up to 875,250 Optional ADSs, at the purchase price per ADS set forth in the paragraph above, for the sole purpose of covering sales of ADSs in excess of the number of Firm ADSs, provided that the purchase price per Optional ADS shall be reduced by an amount per ADS equal to any dividends or distributions declared by the Company and payable on the Firm ADSs but not payable on the Optional ADSs. Any such election to purchase Optional ADSs may be exercised only by written notice from you to the Company, given within a period of 30 calendar days after the date of this Agreement, setting forth the aggregate number of Optional ADSs to be purchased and the date on which such Optional ADSs are to be delivered, as determined by you but in no event earlier than the First Time of Delivery (as defined in Section 4(a) hereof) or, unless you and the Company otherwise agree in writing, earlier than two or later than ten business days after the date of such notice.

 

21


3. Upon the authorization by you of the release of the Firm ADSs, the several Underwriters propose to offer the Firm ADSs for sale upon the terms and conditions set forth in the Prospectus.

4. (a) The ADSs to be purchased by each Underwriter hereunder, in definitive form, and in such authorized denominations and registered in such names as the Representative may request upon at least forty-eight hours’ prior written notice to the Company prior to a Time of Delivery (as defined below), shall be delivered by or on behalf of the Company to the Representative, through the facilities of The Depository Trust Company (“DTC”), for the account of such Underwriter, against payment by or on behalf of such Underwriter of the purchase price therefor by wire transfer of Federal (same-day) funds to the account specified by the Company to the Representative at least forty-eight hours in advance of such Time of Delivery. The Company will cause the certificates representing the ADSs to be made available for checking and packaging at least twenty-four hours prior to the Time of Delivery (as defined below) with respect thereto at the office of DTC or its designated custodian (the “Designated Office”). The time and date of such delivery and payment shall be, with respect to the Firm ADSs, 9:30 a.m., New York City time, on             , 2010 or such other time and date as the Representative and the Company may agree upon in writing, and, with respect to the Optional ADSs, 9:30 a.m., New York City time, on the date specified by the Representative in the written notice given by the Representative of the Underwriters’ election to purchase such Optional ADSs, or such other time and date as the Representative and the Company may agree upon in writing. Such time and date for delivery of the Firm ADSs is herein called the “First Time of Delivery”, such time and date for delivery of the Optional ADSs, if not the First Time of Delivery, is herein called the “Second Time of Delivery”, and each such time and date for delivery is herein called a “Time of Delivery”.

(b) The documents to be delivered at each Time of Delivery by or on behalf of the parties hereto pursuant to Section 8 hereof, including the cross-receipt for the ADSs and any additional documents requested by the Underwriters pursuant to Section 8 hereof, will be delivered at the offices of Simpson Thacher & Bartlett LLP, 35th Floor, ICBC Tower, 3 Garden Road, Central, Hong Kong (the “Closing Location”), and the ADSs will be delivered at the Designated Office, all at such Time of Delivery. A meeting will be held at the Closing Location at 4:00 p.m., Hong Kong time, on the New York Business Day next preceding such Time of Delivery, at which meeting the final drafts of the documents to be delivered pursuant to the preceding sentence will be available for review by the parties hereto. For the purposes of this Section 4, “New York Business Day” shall mean each Monday, Tuesday, Wednesday, Thursday and Friday which is not a day on which banking institutions in New York City are generally authorized or obligated by law or executive order to close.

5. (a) The Company agrees with each of the Underwriters:

(i) To prepare the Prospectus in a form approved by you and to file such Prospectus pursuant to Rule 424(b) under the Act not later than the Commission’s close of business on the second business day following the execution and delivery of this Agreement, or, if applicable, such earlier time as may be required by Rule 430A(a)(3) under the Act; to make no further amendment or any supplement to the Registration Statement or the Prospectus prior to the last Time of Delivery which shall be disapproved by you promptly after reasonable notice thereof; to advise you, promptly after it receives notice thereof, of the time when any amendment to the Registration Statement has been filed or becomes effective or any amendment or supplement to the Prospectus has been filed and to furnish you with copies thereof; to file promptly all material required to be filed by the Company with the Commission pursuant to Rule 433(d) under the Act; to advise you, promptly after it receives notice thereof, of the issuance by the Commission of any stop order or of any order preventing or suspending the use of any Preliminary Prospectus or other prospectus in respect of the ADSs, of the suspension of the qualification of the ADSs for offering or sale in any jurisdiction, of the initiation or threatening of any proceeding for any such purpose, or of any request by the Commission for the amending or supplementing of the Registration Statement, any Preliminary Prospectus, the Prospectus or any Issuer Free Writing Prospectus or for additional information; in the event of such request for amendment or supplement, to provide you and your counsel with copies of any proposed amendment or supplement for review and comment a reasonable amount of time prior to any proposed filing and to file no such amendment or supplement which shall be disapproved by you; and, in the event of the issuance of any stop order or of any order preventing or suspending the use of any Preliminary Prospectus or other prospectus or suspending any such qualification, to promptly use its best efforts to obtain the withdrawal of such order;

 

22


(ii) Promptly from time to time to take such action as you may reasonably request to qualify the ADSs for offering and sale under the securities laws of such jurisdictions as you may request and to comply with such laws so as to permit the continuance of sales and dealings therein in such jurisdictions for as long as may be necessary to complete the distribution of the ADSs, provided that in connection therewith the Company shall not be required to qualify as a foreign corporation or to file a general consent to service of process in any jurisdiction;

(iii) Prior to 10:00 a.m., New York City time, on the New York Business Day next succeeding the date of this Agreement and from time to time, to furnish the Underwriters with written and electronic copies of the Prospectus in New York City in such quantities as you may reasonably request, and, if the delivery of a prospectus (or in lieu thereof, the notice referred to in Rule 173(a) under the Act) is required at any time prior to the expiration of nine months after the time of issue of the Prospectus in connection with the offering or sale of the ADSs and if at such time any event shall have occurred as a result of which the Prospectus as then amended or supplemented would include an untrue statement of a material fact or omit to state any material fact necessary in order to make the statements therein, in the light of the circumstances under which they were made when such Prospectus (or in lieu thereof, the notice referred to in Rule 173(a) under the Act) is delivered, not misleading, or, if for any other reason it shall be necessary during such same period to amend or supplement the Prospectus in order to comply with the Act, to notify you and upon your request to prepare and furnish without charge to each Underwriter and to any dealer in securities as many written and electronic copies as you may from time to time reasonably request of an amended Prospectus or a supplement to the Prospectus which will correct such statement or omission or effect such compliance; and in case any Underwriter is required to deliver a prospectus (or in lieu thereof, the notice referred to in Rule 173(a) under the Act) in connection with sales of any of the ADSs at any time nine months or more after the time of issue of the Prospectus, upon your request but at the expense of such Underwriter, to prepare and deliver to such Underwriter as many written and electronic copies as you may request of an amended or supplemented Prospectus complying with Section 10(a)(3) of the Act;

 

23


(iv) To furnish to you one copy for the Representative and one copy for United States counsel to the Underwriters of the Registration Statement, as initially filed with the Commission, and of all amendments thereto (including all exhibits thereto and sufficient copies of the foregoing (other than exhibits) for distribution of a copy to each of the other Underwriters;

(v) To furnish to you as early as practicable prior to each Time of Delivery, as the case may be, but not later than two business days prior thereto, a copy of the latest available unaudited interim and monthly consolidated financial statements, if any, of the Company and its subsidiaries which have been read by the Company’s independent public accountants, as stated in their letter to be furnished pursuant to Section 8(k) hereof;

(vi) To make generally available to its securityholders as soon as practicable, but in any event not later than sixteen months after the effective date of the Registration Statement (as defined in Rule 158(c) under the Act), a consolidated earnings statement of the Company and its subsidiaries (which need not be audited) complying with Section 11(a) of the Act and the rules and regulations of the Commission thereunder (including, at the option of the Company, Rule 158);

(vii) During the period beginning from the date hereof and continuing to and including the date 180 days after the date of the Prospectus (the “Lock-Up Period”) not to offer, sell, contract to sell, pledge, grant any option to purchase, purchase any option or contract to sell, right or warrant to purchase, make any short sale, file a registration statement with respect to, or otherwise dispose of (including entering into any swap or other arrangement that transfers to another, in whole or in part, any of the economic consequence of ownership interests), except as provided hereunder, (A) any ADSs or Ordinary Shares or securities of the Company that are substantially similar to the ADSs or Ordinary Shares, including but not limited to any options or warrants to purchase Ordinary Shares or any securities that are convertible into or exchangeable for, or that represent the right to receive, ADSs or Ordinary Shares or any such substantially similar securities; and (B) any ordinary shares of its subsidiaries or controlled affiliates or depositary shares or depositary receipts representing such ordinary shares, including but not limited to any securities that are convertible into or exchangeable for or that represent the right to receive such ordinary shares or such depositary shares or depositary receipts or any such substantially similar securities (in each case other than pursuant to the Company’s 2009 Long-Term Incentive Plan existing on the date of this Agreement and which are described in the Pricing Prospectus), without your prior written consent; provided, however, that if (1) during the last 17 days of the initial Lock-Up Period, the Company releases earnings results or announces material news or a material event or (2) prior to the expiration of the initial Lock-Up Period, the Company announces, or if the Representative determines, that the Company will release earnings results during the 15-day period following the last day of the initial Lock-Up Period, then in each case the Lock-Up Period will be automatically extended until the expiration of the 18-day period beginning on the date of release of the earnings results or the announcement of the material news or material event, as applicable, unless the Representative waives, in writing, such extension; and the Company will provide the Representative and each shareholder subject to the Lock-Up Period pursuant to the lockup agreements described in Section 8(t) with prior notice of any such announcement that gives rise to an extension of the Lock-Up Period;

 

24


(viii) During the Lock-Up Period, to cause each of its subsidiaries not to offer, sell, contract to sell, pledge, grant any option to purchase, purchase any option or contract to sell, right or warrant to purchase, make any short sale, file a registration statement with respect to any of the ADSs or Ordinary Shares or any securities that are convertible into or exercisable or exchangeable for the ADSs or Ordinary Shares, or otherwise dispose of (including entering into any swap or other arrangement that transfers to another, in whole or in part, any of the economic consequence of ownership interests), (A) any ADSs or Ordinary Shares or any securities of the Company that are substantially similar to the ADSs or Ordinary Shares, including but not limited to any securities that are convertible into or exchangeable for, or that represent the right to receive, ADSs or Ordinary Shares or any such substantially similar securities; and (B) any ordinary shares of such subsidiary or any other subsidiary or depositary shares or depositary receipts representing such ordinary shares, including but not limited to any securities that are convertible into or exchangeable for or that represent the right to receive such ordinary shares or such depositary shares or depositary receipts or any such substantially similar securities, without your prior written consent; provided, however, that if (1) during the last 17 days of the initial Lock-Up Period, the Company releases earnings results or announces material news or a material event or (2) prior to the expiration of the initial Lock-Up Period, the Company announces, or if the Representative determines, that the Company will release earnings results during the 15-day period following the last day of the initial Lock-Up Period, then in each case the Lock-Up Period will be automatically extended until the expiration of the 18-day period beginning on the date of release of the earnings results or the announcement of the material news or material event, as applicable, unless the Representative waives, in writing, such extension; and the Company will provide the Representative and each shareholder subject to the Lock-Up Period pursuant to the lockup agreements described in Section 8(u) with prior notice of any such announcement that gives rise to an extension of the Lock-Up Period;

(ix) Not to facilitate any shareholder’s conversion of Ordinary Shares to ADSs during the Lock-Up Period (including any automatic extension thereof as contemplated in Sections 5(a)(vii) and (viii) above) and not to release the Depositary from the obligations set forth in, or otherwise amend, terminate or fail to enforce, the Depositary Agreement without the consent of the Representative;

(x) During the Lock-Up Period (including any automatic extension thereof as contemplated in Sections 5(a)(vii) and (viii) above), the Company will cause each Company option holder that has not entered into a Lock-Up Agreement as contemplated by Section 8(u) to be subject to and comply with the restrictions set forth in the Lock-Up Agreements including (x) providing each such option holder notice of such restrictions immediately upon closing of the offering and (y) including a legend with respect to such restrictions on the certificates evidencing the Ordinary Shares to be issued to any such option holder upon exercise of the options during the Lock-Up Period; and the Company will provide the Representative, the Depositary and each option holder with prior notice of any announcement that gives rise to an automatic extension of the Lock-Up Period (as contemplated in Sections 5(a)(vii) and (viii) above);

(xi) Use its best efforts to procure its shareholders who are PRC residents to comply with any applicable registrations or approvals required by PRC State Administration of Foreign Exchange;

 

25


(xii) To advise you promptly, and if requested by you, confirm such advice in writing, so long as a prospectus is required by the Act to be delivered (whether physically or through compliance with Rule 172 under the Act or any similar rule) in connection with any sale of ADSs, of (A) any material change in the general affairs, management, financial condition, results of operations or prospects of the Company and its subsidiaries, (B) any change in information contained in the Registration Statement, any Preliminary Prospectus, the Prospectus and any Issuer Free Writing Prospectuses, or (C) any new material information relating to the Company or relating to any matter stated in the Registration Statement, any Preliminary Prospectus, the Prospectus and any Issuer Free Writing Prospectuses;

(xiii) To furnish to its shareholders as soon as practicable after the end of each fiscal year an annual report (in English) (including a balance sheet and statements of income, shareholders’ equity and cash flows of the Company and its consolidated subsidiaries prepared in conformity with US GAAP and certified by independent public accountants) and, as soon as practicable after the end of each of the first three quarters of each fiscal year (beginning with the fiscal quarter ending after the effective date of the Registration Statement), to make available to its shareholders consolidated summary financial information of the Company and its subsidiaries for such quarter in reasonable detail;

(xiv) During a period of five years from the effective date of the Registration Statement, to furnish to you copies of all reports or other communications (financial or other) furnished to shareholders, and to deliver to you (i) as soon as they are available, copies of any reports and financial statements furnished to or filed with the Commission or any securities exchange on which any class of securities of the Company is listed and (ii) such additional information concerning the business and financial condition of the Company as you may from time to time reasonably request provided, however, that the Company shall not be required to provide any such information that it is not prepared to release simultaneously to its shareholders and the public (such financial statements and information to be on a consolidated basis to the extent the accounts of the Company and its subsidiaries are consolidated in reports furnished to its shareholders generally or to the Commission);

(xv) To use the net proceeds received by it from the sale of the ADSs pursuant to this Agreement in the manner specified in the Pricing Prospectus and the Prospectus under the caption “Use of Proceeds” and in a manner such that (i) the Company will be in compliance with any applicable laws, rules and regulations of any Governmental Agency having jurisdiction over the Company or its subsidiaries including, without limitation, the environmental protection laws and regulations and the requirement to repatriate the net proceeds received by it into the PRC under the applicable regulations of the Ministry of Commerce and the State Administration of Foreign Exchange of the PRC; (ii) the Company will not use any of the proceeds from the offering of the ADSs contemplated hereby to fund any operations in, to finance any investments, projects or activities in, or to make any payments to, any country, or to make any payments to, or finance any activities with, any person, targeted by any of the economic sanctions promulgated by any Executive Order issued by the President of the United States or administered by the OFAC, and (iii) the Company will maintain and implement adequate internal controls and procedures to monitor and audit transactions that are reasonably designed to detect and prevent any use of the proceeds from the offering of the ADSs contemplated hereby that is inconsistent with any of the Company’s representations and obligations under the preceding sentence;

 

26


(xvi) Prior to each Time of Delivery to deposit Ordinary Shares with the Depositary in accordance with the provisions of the Deposit Agreement and otherwise to comply with the Deposit Agreement so that ADRs evidencing ADSs will be executed (and, if applicable, countersigned) and issued by the Depositary against receipt of such Ordinary Shares and delivered to the Underwriters at such Time of Delivery;

(xvii) Not to (and to cause its affiliates not to) take, directly or indirectly, any action which is designed to or which constitutes or which would reasonably be expected to cause or result in stabilization or manipulation of the price of any security of the Company or facilitate the sale or resale of the Shares and the ADSs;

(xviii) To use its best efforts to include for listing the Shares and ADSs on the NYSE;

(xix) To file all documents required to be filed by the Commission pursuant to the Exchange Act within the time periods required by the Exchange Act and the rules and regulations of the Commission thereunder, including such information on Form 20-F as may be required by Rule 463 under the Act;

(xx) If the Company elects to rely upon Rule 462(b), the Company shall file a Rule 462(b) Registration Statement with the Commission in compliance with Rule 462(b) by 10:00 p.m., Washington, D.C. time, on the date of this Agreement, and the Company shall at the time of filing either pay to the Commission the filing fee for the Rule 462(b) Registration Statement or give irrevocable instructions for the payment of such fee pursuant to Rule 111(b) under the Act; the Company shall give the Representative notice of any filings made pursuant to the Exchange Act or the rules or regulations of the Commission under the Exchange Act within 48 hours prior to the Applicable Time; the Company will give the Representative notice of its intention to make any such filing from the Applicable Time to the Time of Delivery and will furnish the Representative with copies of any such documents a reasonable amount of time prior to such proposed filing, as the case may be, and will not file or use any such document to which the Representative or counsel for the Underwriters shall object;

(xxi) Upon request of any Underwriter, to furnish, or cause to be furnished, to such Underwriter an electronic version of the Company’s trademarks, servicemarks and corporate logo for use on the website, if any, operated by such Underwriter for the purpose of facilitating the on-line offering of the ADSs (the “License”); provided, however, that the License shall be used solely for the purpose described above, is granted without any fee and may not be assigned or transferred;

(xxii) To indemnify and hold each of the Underwriters harmless against any documentary, stamp or similar issuance or transfer taxes, duties or fees and any transaction levies, commissions or brokerage charges, including any interest and penalties, which are or may be required to be paid in connection with the creation, allotment, issuance, offer and distribution of the Shares and ADSs to be sold by the Company and the execution and delivery of this Agreement and the Deposit Agreement;

(xxiii) To comply with Rule 433(d) under the Act (without reliance on Rule 164(b) under the Act) and with Rule 433(g) under the Act;

 

27


(xxiv) Prior to each Time of Delivery, to issue no press release or other communication directly or indirectly and hold no press conferences with respect to the Company or any of its subsidiaries, the financial condition, results of operations, business, properties, assets, or liabilities of the Company or any of its subsidiaries, or the offering of the ADSs, without your prior consent;

(xxv) Prior to or concurrently with the First Time of Delivery, to effect the conversion of all Preferred Shares into Ordinary Shares and to ensure that all such Ordinary Shares are duly authorized, validly issued and fully paid and non-assessable prior to or concurrently with the First Time of Delivery; and

(xxvi) Not, at any time at or after the execution of this Agreement, to, directly or indirectly, offer or sell any Shares or ADSs by means of any “prospectus” (within the meaning of the Act), or use any “prospectus” (within the meaning of the Act) in connection with the offer or sale of the Shares or ADSs, in each case other than the Prospectus.

6. (a) The Company represents and agrees that, without the prior consent of the Representative, it has not made and will not make any offer relating to the Shares and the ADSs that would constitute a “free writing prospectus” as defined in Rule 405 under the Act; each Underwriter represents and agrees that, without the prior written consent of the Company and the Representative, it has not made and will not make any offer relating to the Shares and the ADSs that would constitute a free writing prospectus; any such free writing prospectus the use of which has been consented to by the Company and the Representative is listed on Schedule II hereto;

(b) The Company has complied and will comply with the requirements of Rule 433 under the Act applicable to any Issuer Free Writing Prospectus, including timely filing with the Commission or retention where required and legending; and the Company represents that it has satisfied and agrees that it will satisfy the conditions under Rule 433 under the Act to avoid a requirement to file with the Commission any electronic road show; and

(c) The Company agrees that if at any time following issuance of an Issuer Free Writing Prospectus any event occurred or occurs as a result of which such Issuer Free Writing Prospectus would conflict with the information in the Registration Statement, the Pricing Prospectus or the Prospectus or would include an untrue statement of a material fact or omit to state any material fact necessary in order to make the statements therein, in the light of the circumstances then prevailing, not misleading, the Company will give prompt notice thereof to the Representative and, if requested by the Representative, will prepare and furnish without charge to each Underwriter an Issuer Free Writing Prospectus or other document which will correct such conflict, statement or omission; provided, however, that this representation and warranty shall not apply to any statements or omissions in an Issuer Free Writing Prospectus made in reliance upon and in conformity with information furnished in writing to the Company by an Underwriter through the Representative expressly for use therein.

 

28


7. The Company covenants and agrees with each of the several Underwriters that the Company will pay or cause to be paid the following: (i) the fees, disbursements and expenses of the Company’s counsel and accountants in connection with the registration of the Shares and ADSs under the Act and all other expenses in connection with the preparation, printing, reproduction and filing of the Registration Statement, the ADS Registration Statement, the Form 8-A Registration Statement, any Preliminary Prospectus, the Pricing Prospectus, any Issuer Free Writing Prospectus and the Prospectus and amendments or supplements thereto, and the mailing and delivering of copies thereof to the Underwriters and dealers, (ii) the cost of printing or producing any Agreement among Underwriters, this Agreement, the Deposit Agreement, the Blue Sky Memorandum, any dealer agreements, any powers of attorney, any closing documents (including any compilations thereof) and any other documents in connection with the offering, purchase, sale and delivery of the ADSs, (iii) all expenses in connection with the qualification of the Shares and the ADSs for offering and sale under state or foreign securities laws as provided in Section 5 hereof including the fees and disbursements of counsel for the Underwriters in connection with such qualification and in connection with the Blue Sky surveys or legal investment surveys, (iv) all fees and expenses in connection with the application for including the ADSs for listing on the NYSE and any registration thereof under the Exchange Act, (v) all fees and expenses in connection with any required review by the FINRA of the terms of the sale of the Shares and the ADSs, including the fees and disbursements of counsel for the Underwriters in connection with such FINRA matters, (vi) the cost of preparing certificates representing the ADSs, (vii) the cost and charges of any transfer agent or registrar for the ADSs, (viii) all the costs and expenses relating to presentations or meetings undertaken in connection with the marketing of the offering and sale of the ADSs to prospective investors, including, without limitation, expenses associated with the production of road show slides and graphics, fees and expenses of any consultants engaged in connection with the road show presentations, travel, accommodation and meal expenses, and other road show expenses incurred by the officers of the Company and any such consultants, and the cost of any aircraft chartered in connection with the road show, in an amount up to US$            , (ix) any sales, use or similar taxes (including additions to such taxes, if any) incurred by the Underwriters in connection with the offering, and up to US$             or         % of the total amount of the offering for the reasonable out-of-pocket expenses (including fees, disbursements and expenses of counsels for the Underwriters) incurred by the Underwriters in connection with the transactions contemplated by this Agreement, (x) the costs and expenses of qualifying the ADSs for inclusion in the book-entry settlement system of the DTC, (xi) all expenses and taxes arising as a result of the deposit by the Company of the Shares with the Depositary and the issuance and delivery of the ADRs evidencing ADSs in exchange therefor by the Depositary to the Company, of the sale and delivery of the ADSs and the Shares by the Company to or for the account of the Underwriters and of the sale and delivery of the ADSs and the Shares by the Underwriters to each other and to the initial purchasers thereof in the manner contemplated under this Agreement, including, in any such case, any of the Cayman Islands and PRC income, capital gains, withholding, transfer or other tax asserted against an Underwriter by reason of the purchase and sale of an ADS or a Share pursuant to this Agreement, (xii) the fees and expenses of the Depositary as agreed by the Company and the Depositary and any custodian appointed under the Deposit Agreement, other than the fees and expenses to be paid by holders of ADRs (other than the Underwriters in connection with the initial purchase of ADSs), (xiii) the fees and expenses of the Authorized Agent (as defined in Section 15 hereof), and (xiv) all other costs and expenses incident to the performance of the Company’s obligations hereunder which are not otherwise specifically provided for in this Section 7. The Company hereby agrees that the Representative may, at its sole discretion, deduct from the purchase price of the ADSs the expenses (including fees, disbursements and expenses of counsels for the Underwriters) incurred by the Underwriters and to be paid by the Company as provided for under this Section 7.

 

29


8. The obligations of the Underwriters hereunder, as to the ADSs to be delivered at each Time of Delivery, shall be subject, in their discretion, to the condition that all representations and warranties and other statements of the Company and the Founders herein are, at and as of such Time of Delivery, true and correct, the condition that the Company and the Founders shall have performed all of their respective obligations hereunder theretofore to be performed, and the following additional conditions:

(a) The Prospectus shall have been filed with the Commission pursuant to Rule 424(b) under the Act within the applicable time period prescribed for such filing by the rules and regulations under the Act and in accordance with Section 5(a)(i) hereof; all material required to be filed by the Company pursuant to Rule 433(d) under the Act shall have been filed with the Commission within the applicable time period prescribed for such filing by Rule 433; if the Company has elected to rely upon Rule 462(b) under the Act, the Rule 462(b) Registration Statement shall have become effective by 10:00 p.m., Washington, D.C. time, on the date of this Agreement; no stop order suspending the effectiveness of the Registration Statement or any part thereof shall have been issued and no proceeding for that purpose shall have been initiated or threatened by the Commission; no stop order suspending or preventing the use of the Prospectus or any Issuer Free Writing Prospectus shall have been initiated or threatened by the Commission; and all requests for additional information on the part of the Commission shall have been complied with to your reasonable satisfaction;

(b) Simpson Thacher & Bartlett LLP, United States counsel for the Underwriters, shall have furnished to you such written opinion and letter, dated such Time of Delivery, in form and substance satisfactory to you, and such counsel shall have received such papers and information as they may reasonably request to enable them to pass upon such matters;

(c) Commerce & Finance Law Offices, PRC counsel for the Underwriters, shall have furnished to you such written opinion or opinions, dated such Time of Delivery, in form and substance satisfactory to you, and such counsel shall have received such papers and information as they may reasonably request to enable them to pass upon such matters;

(d) Baker & McKenzie LLP, United States counsel for the Company, shall have furnished to you their written opinions, dated such Time of Delivery, in form and substance satisfactory to you, with a reliance letter addressed to the Depositary;

(e) Baker & McKenzie LLP, Hong Kong counsel for the Company, shall have furnished to you their written opinions, dated such Time of Delivery, in form and substance satisfactory to you;

(f) Weiler & Partners, German counsel for the Company, shall have furnished to you their written opinions, dated such Time of Delivery, in form and substance satisfactory to you;

(g) Chen & Co. Law Firm, PRC counsel for the Company, shall have furnished to you such written opinion or opinions, dated such Time of Delivery, in form and substance satisfactory to you;

(h) Conyers Dill & Pearman, Cayman Islands counsel for the Company, shall have furnished to you their written opinions, dated such Time of Delivery, in form and substance satisfactory to you, with a reliance letter addressed to the Depositary;

 

30


(i) Ziegler, Ziegler & Associates LLP counsel for the Depositary, shall have furnished to you their written opinion, dated such Time of Delivery, in form and substance satisfactory to you;

(j) Baker & McKenzie LLP, Hong Kong counsel for the Company, shall have issued written opinions relating to the non-competition agreement between Mr. Arturo Herrero, the Company’s Chief Strategy Officer, and his former employer, dated on or prior to the date of the Pricing Prospectus, in form and substance satisfactory to you;

(k) On the date of the Prospectus at a time prior to the execution of this Agreement, at 9:30 a.m., New York City time, on the date on which the first sale of ADSs is confirmed if such date is not the same as the date of this Agreement, on the effective date of any post-effective amendment to the Registration Statement filed subsequent to the date of this Agreement, and at each Time of Delivery, (i) PwC shall have furnished to you a letter or letters, dated the respective dates of delivery thereof, in form and substance satisfactory to you; (ii) the Chief Financial Officer of the Company shall have furnished to you an officer’s certificate with respect to certain data contained in the Preliminary Prospectus and the Pricing Prospectus, dated the respective dates of delivery thereof, in form and substance satisfactory to you;

(l) No Preliminary Prospectus, Pricing Prospectus, Issuer Free Writing Prospectus or Prospectus or amendment or supplement to the Registration Statement, the Preliminary Prospectus, the Pricing Prospectus or the Prospectus shall have been filed to which you shall have objected in writing;

(m)(i) Neither the Company nor any of its subsidiaries shall have sustained since the date of the latest audited financial statements included in the Pricing Prospectus any loss or interference with its business from fire, explosion, flood or other calamity, whether or not covered by insurance, or from any labor dispute or court or governmental action, order or decree, otherwise than as set forth or contemplated in the Pricing Prospectus, and (ii) since the respective dates as of which information is given in the Pricing Prospectus, there shall not have been any change in the share capital or short-term debt or long-term debt of the Company or any of its subsidiaries or any change, or any development involving a prospective change, in or affecting the general affairs, management, financial position, shareholders’ equity, results of operations or prospects of the Company and its subsidiaries, otherwise than as set forth or contemplated in the Pricing Prospectus, the effect of which, in any such case described in clause (i) or (ii), is in your judgment so material and adverse as to make it impracticable or inadvisable to proceed with the public offering or the delivery of the Shares represented by ADSs being delivered at such Time of Delivery on the terms and in the manner contemplated in the Prospectus;

(n) On or after the Applicable Time there shall not have occurred any of the following: (i) a suspension or material limitation in trading in securities generally on Nasdaq, the NYSE or The Stock Exchange of Hong Kong Limited; (ii) a suspension or material limitation in trading in the Company’s securities on the NYSE; (iii) a general moratorium on commercial banking activities in New York, London, Hong Kong, the PRC or the Cayman Islands declared by the relevant authorities, or a material disruption in commercial banking or securities settlement or clearance services in the United States, Hong Kong, the PRC or the Cayman Islands; (iv) a change or development involving a prospective change in taxation affecting the Company, any of its subsidiaries or the Shares or the ADSs or the transfer thereof; (v) the enactment, publication, decree or other promulgation of any statute, regulation, rule or order of any Governmental Agency materially affecting the business or operations of the Company or its subsidiaries; (vi) the outbreak or escalation of hostilities or act of terrorism involving the United States, Hong Kong, the PRC or the Cayman Islands or the declaration by the United States, Hong Kong, the PRC or the Cayman Islands of a national emergency or war; or (vii) the occurrence of any other calamity or crisis or any change in financial, political or economic conditions or currency exchange rates or controls in the United States, Hong Kong, the PRC, the Cayman Islands or elsewhere, if the effect of any such event specified in clauses (v), (vi) or (vii), in the sole judgment of the Representative, makes it impracticable or inadvisable to proceed with the public offering or the delivery of the Shares and the ADSs being delivered at such Time of Delivery on the terms and in the manner contemplated in the Prospectus;

 

31


(o) The FINRA shall have confirmed in writing that it has not raised any objection with respect to the fairness and reasonableness of the underwriting terms and arrangements;

(p) All of the outstanding Preferred Shares shall have been or upon the closing, shall be converted into Ordinary Shares in accordance with the terms of the Preferred Shares;

(q) The ADSs to be sold by the Company at such Time of Delivery shall have been duly listed on the NYSE, subject to notice of issuance;

(r) The Depositary shall have furnished or caused to be furnished to you at such Time of Delivery certificates satisfactory to you evidencing the deposit with it of the Shares being so deposited against issuance of ADRs evidencing the ADSs to be delivered by the Company at such Time of Delivery, and the execution, countersignature (if applicable), issuance and delivery of ADRs evidencing such ADSs pursuant to the Deposit Agreement;

(s) Certificates in negotiable form representing all of the Shares underlying the ADSs to be sold by the Company hereunder shall have been placed in custody with The Hong Kong and Shanghai Banking Corporation Limited, as custodian for the Depositary;

(t) Each party identified by you shall have entered into an agreement (each a “Lock-Up Agreement”) in the form satisfactory to you;

(u) The Company shall have complied with the provisions of Section 5(a)(iii) hereof with respect to the furnishing of prospectuses on the New York Business Day next succeeding the date of this Agreement;

(v) The Company and the Founders shall have furnished or caused to be furnished to you at such Time of Delivery certificates of officers of the Company and the Founders, respectively, satisfactory to you as to the accuracy of the representations and warranties of the Company and the Founders herein at and as of such Time of Delivery, as to the performance by the Company and the Founders of all of their respective obligations hereunder to be performed at or prior to such Time of Delivery, and as to such other matters as you may reasonably request, including, without limitation, certificates of officers of the Company satisfactory to you with respect to the memorandum and articles of association and other organizational documents of the Company, all resolutions of the board of directors of the Company and other corporate actions relating to this Agreement and the authorization, issue and sale of the Shares and ADSs and the incumbency and specimen signatures of signing officers, and the Company shall have furnished or caused to be furnished certificates as to the matters set forth in subsections (a) and (m) and (p) of this Section, and as to such other matters as you may reasonably request;

 

32


(w) There shall not be any litigation, proceedings, investigations, processes for administrative sanctions or other actions initiated or threatened by any Governmental Agency, in each case with due authority, against or involving any party hereto and to the Deposit Agreement, in the PRC or elsewhere, that seeks to declare non-compliance, unlawful or illegal, under PRC laws, rules and regulations or otherwise, the issuance and sales of the Shares and ADSs, the listing and trading of the ADSs on the NYSE or the transactions contemplated by this Agreement and the Deposit Agreement;

(x) There shall not be any adverse legislative or regulatory developments related to the PRC Mergers and Acquisitions Rules and Related Clarifications which in the sole judgment of the Representative would make it inadvisable or impractical to proceed with the public offering or the delivery of the Shares and the ADSs being delivered at such Time of Delivery on the terms and in the manner contemplated in this Agreement (including any such development that results in either PRC counsel for the Company or PRC counsel for the Underwriters not being able to confirm, on the date of the Prospectus at a time prior to the execution of this Agreement and at such Time of Delivery, the respective opinions of such counsel); and neither the PRC Mergers and Acquisitions Rules Memorandum nor the analysis or conclusions contained therein shall have been withdrawn, revoked, amended, supplemented or otherwise modified; and

(y) The expenses (including fees, disbursements and expenses of counsels for the Underwriters) incurred by the Underwriters and to be paid by the Company under Section 7 hereof shall have been paid in full, or arrangements to the satisfaction of the Representative shall have been made in connection with the payment of such expenses.

9. (a) The Company and each of the Founders, jointly and severally, will indemnify and hold harmless each Underwriter against any losses, claims, damages or liabilities, joint or several, to which such Underwriter may become subject, under the Act or otherwise, insofar as such losses, claims, damages or liabilities (or actions in respect thereof) (i) arise out of or are based upon an untrue statement or alleged untrue statement of a material fact contained in the Registration Statement, the ADS Registration Statement, any Preliminary Prospectus, the Pricing Prospectus, the Pricing Disclosure Package or the Prospectus, or any amendment or supplement thereto, any Issuer Free Writing Prospectus or any “issuer information” filed or required to be filed pursuant to Rule 433(d) under the Act, or arise out of or are based upon the omission or alleged omission to state therein a material fact required to be stated therein or necessary to make the statements therein not misleading, or (ii) arise out of or are based upon any challenge to the compliance, legality or legitimacy of the issuance and sale of the Shares and the ADSs, the listing and trading of the ADSs on the NYSE or the transactions contemplated by this Agreement and the Deposit Agreement under any applicable laws, rules and regulations or otherwise and will reimburse each Underwriter for any legal or other expenses reasonably incurred by such Underwriter in connection with investigating or defending any such action or claim as such expenses are incurred; provided, however, that with respect to clause (i) of this paragraph, the Company and the Founders shall not be liable in any such case to the extent that any such loss, claim, damage or liability arises out of or is based upon an untrue statement or alleged untrue statement or omission or alleged omission made in the Registration Statement, the ADS Registration Statement, any Preliminary Prospectus, the Pricing Prospectus, the Pricing Disclosure Package or the Prospectus, or any amendment or supplement thereto, or any Issuer Free Writing Prospectus in reliance upon and in conformity with written information furnished to the Company by any Underwriter through the Representative expressly for use therein.

 

33


(b) Each Underwriter will severally and not jointly indemnify and hold harmless the Company against any losses, claims, damages or liabilities to which the Company may become subject, under the Act or otherwise, insofar as such losses, claims, damages or liabilities (or actions in respect thereof) arise out of or are based upon an untrue statement or alleged untrue statement of a material fact contained in the Registration Statement, the ADS Registration Statement, any Preliminary Prospectus, the Pricing Prospectus or the Prospectus, or any amendment or supplement thereto, or any Issuer Free Writing Prospectus, or arise out of or are based upon the omission or alleged omission to state therein a material fact required to be stated therein or necessary to make the statements therein not misleading, in each case to the extent, but only to the extent, that such untrue statement or alleged untrue statement or omission or alleged omission was made in the Registration Statement, the ADS Registration Statement, any Preliminary Prospectus, the Pricing Prospectus or the Prospectus, or any amendment or supplement thereto, or any Issuer Free Writing Prospectus, in reliance upon and in conformity with written information furnished to the Company by such Underwriter through the Representative expressly for use therein; and will reimburse the Company for any legal or other expenses reasonably incurred by the Company in connection with investigating or defending any such action or claim as such expenses are incurred.

(c) Promptly after receipt by an indemnified party under subsection (a) or (b) above of notice of the commencement of any action, such indemnified party shall, if a claim in respect thereof is to be made against an indemnifying party under such subsection, notify the indemnifying party in writing of the commencement thereof; but the omission so to notify the indemnifying party shall not relieve it from any liability which it may have to any indemnified party otherwise than under such subsection. In case any such action shall be brought against any indemnified party and it shall notify the indemnifying party of the commencement thereof, the indemnifying party shall be entitled to participate therein and, to the extent that it shall wish, jointly with any other indemnifying party similarly notified, to assume the defense thereof, with counsel satisfactory to such indemnified party (who shall not, except with the consent of the indemnified party, be counsel to the indemnifying party), and, after notice from the indemnifying party to such indemnified party of its election so to assume the defense thereof, the indemnifying party shall not be liable to such indemnified party under such subsection for any legal expenses of other counsel or any other expenses, in each case subsequently incurred by such indemnified party, in connection with the defense thereof other than reasonable costs of investigation. No indemnifying party shall, without the written consent of the indemnified party, effect the settlement or compromise of, or consent to the entry of any judgment with respect to, any pending or threatened action or claim in respect of which indemnification or contribution may be sought hereunder (whether or not the indemnified party is an actual or potential party to such action or claim) unless such settlement, compromise or judgment (i) includes an unconditional release of the indemnified party from all liability arising out of such action or claim and (ii) does not include a statement as to or an admission of fault, culpability or a failure to act, by or on behalf of any indemnified party.

 

34


(d) If the indemnification provided for in this Section 9 is unavailable to or insufficient to hold harmless an indemnified party under subsection (a) or (b) above in respect of any losses, claims, damages or liabilities (or actions in respect thereof) referred to therein, then each indemnifying party shall contribute to the amount paid or payable by such indemnified party as a result of such losses, claims, damages or liabilities (or actions in respect thereof) in such proportion as is appropriate to reflect the relative benefits received by the Company on the one hand and the Underwriters on the other from the offering of the ADSs. If, however, the allocation provided by the immediately preceding sentence is not permitted by applicable law or if the indemnified party failed to give the notice required under subsection (c) above, then each indemnifying party shall contribute to such amount paid or payable by such indemnified party in such proportion as is appropriate to reflect not only such relative benefits but also the relative fault of the Company on the one hand and the Underwriters on the other in connection with the statements or omissions which resulted in such losses, claims, damages or liabilities (or actions in respect thereof), as well as any other relevant equitable considerations. The relative benefits received by the Company on the one hand and the Underwriters on the other shall be deemed to be in the same proportion as the total net proceeds from the offering (before deducting expenses) received by the Company bear to the total underwriting discounts and commissions received by the Underwriters, in each case as set forth in the table on the cover page of the Prospectus. The relative fault shall be determined by reference to, among other things, whether the untrue or alleged untrue statement of a material fact or the omission or alleged omission to state a material fact relates to information supplied by the Company on the one hand or the Underwriters on the other and the parties’ relative intent, knowledge, access to information and opportunity to correct or prevent such statement or omission. The Company and the Underwriters agree that it would not be just and equitable if contribution pursuant to this subsection (d) were determined by pro rata allocation (even if the Underwriters were treated as one entity for such purpose) or by any other method of allocation which does not take account of the equitable considerations referred to above in this subsection (d). The amount paid or payable by an indemnified party as a result of the losses, claims, damages or liabilities (or actions in respect thereof) referred to above in this subsection (d) shall be deemed to include any legal or other expenses reasonably incurred by such indemnified party in connection with investigating or defending any such action or claim. Notwithstanding the provisions of this subsection (d), no Underwriter shall be required to contribute any amount in excess of the amount by which the total price at which the ADSs underwritten by it and distributed to the public were offered to the public exceeds the amount of any damages which such Underwriter has otherwise been required to pay by reason of such untrue or alleged untrue statement or omission or alleged omission. No person guilty of fraudulent misrepresentation (within the meaning of Section 11(f) of the Act) shall be entitled to contribution from any person who was not guilty of such fraudulent misrepresentation. The Underwriters’ obligations in this subsection (d) to contribute are several in proportion to their respective underwriting obligations and not joint.

(e) The obligations of the Company and the Founders under this Section 9 shall be in addition to any liability which the Company and the Founders may otherwise have and shall extend, upon the same terms and conditions, to each person, if any, who controls any Underwriter within the meaning of the Act and each broker-dealer affiliate of any Underwriter; and the obligations of the Underwriters under this Section 9 shall be in addition to any liability which the respective Underwriters may otherwise have and shall extend, upon the same terms and conditions, to each officer and director of the Company (including any person who, with his or her consent, is named in the Registration Statement as about to become a director of the Company) and to each person, if any, who controls the Company within the meaning of the Act.

 

35


10. (a) If any Underwriter shall default in its obligation to purchase the ADSs which it has agreed to purchase hereunder at a Time of Delivery, you may in your discretion arrange for you or another party or other parties to purchase such ADSs on the terms contained herein. If within thirty-six hours after such default by any Underwriter you do not arrange for the purchase of such ADSs, then the Company shall be entitled to a further period of thirty-six hours within which to procure another party or other parties satisfactory to you to purchase such ADSs on such terms. In the event that, within the respective prescribed periods, you notify the Company that you have so arranged for the purchase of such ADSs, or the Company notifies you that it has so arranged for the purchase of such ADSs, you or the Company shall have the right to postpone such Time of Delivery for a period of not more than seven days, in order to effect whatever changes may thereby be made necessary in the Registration Statement or the Prospectus, or in any other documents or arrangements, and the Company agrees to file promptly any amendments or supplements to the Registration Statement or the Prospectus which in your opinion may thereby be made necessary. The term “Underwriter” as used in this Agreement shall include any person substituted under this Section with like effect as if such person had originally been a party to this Agreement with respect to such ADSs.

(b) If, after giving effect to any arrangements for the purchase of the ADSs of a defaulting Underwriter or Underwriters by you and the Company as provided in subsection (a) above, the aggregate number of such ADSs which remains unpurchased does not exceed one-eleventh of the aggregate number of all the ADSs to be purchased at such Time of Delivery, then the Company shall have the right to require each non-defaulting Underwriter to purchase the number of ADSs which such Underwriter agreed to purchase hereunder at such Time of Delivery and, in addition, to require each non-defaulting Underwriter to purchase its pro rata share (based on the number of ADSs which such Underwriter agreed to purchase hereunder) of the ADSs of such defaulting Underwriter or Underwriters for which such arrangements have not been made; but nothing herein shall relieve a defaulting Underwriter from liability for its default.

(c) If, after giving effect to any arrangements for the purchase of the ADSs of a defaulting Underwriter or Underwriters by you and the Company as provided in subsection (a) above, the aggregate number of such ADSs which remains unpurchased exceeds one-eleventh of the aggregate number of all the ADSs to be purchased at such Time of Delivery, or if the Company shall not exercise the right described in subsection (b) above to require non-defaulting Underwriters to purchase ADSs of a defaulting Underwriter or Underwriters, then this Agreement (or, with respect to the Second Time of Delivery, the obligations of the Underwriters to purchase and of the Company to sell the Optional ADSs) shall thereupon terminate, without liability on the part of any non-defaulting Underwriter or the Company, except for the expenses to be borne by the Company and the Underwriters as provided in Section 7 hereof and the indemnity and contribution agreements in Section 9 hereof; but nothing herein shall relieve a defaulting Underwriter from liability for its default.

 

36


11. The respective indemnities and contribution provisions in Section 9, and the agreements, representations, warranties and other statements of the Company, the Founders and the several Underwriters, as set forth in this Agreement or made by or on behalf of them, respectively, pursuant to this Agreement, shall remain in full force and effect, regardless of any investigation (or any statement as to the results thereof) made by or on behalf of any Underwriter or any controlling person of any Underwriter, or the Company, or any officer or director or controlling person of the Company, or any of the Founders, and shall survive delivery of and payment for the ADSs.

12. (a) This Agreement shall become effective when the parties hereto have executed and delivered this Agreement.

(b) The obligations of the several Underwriters hereunder shall be subject to termination in the absolute discretion of the Representative, if any of the conditions set forth in Section 8 hereof is not satisfied.

(c) If the Representative elects to terminate this Agreement as provided in this Section 12, the Company, each of the Founders and each other Underwriter shall be notified promptly in writing.

(d) If this Agreement shall be terminated pursuant to Section 10 hereof, neither the Company nor any of the Founders shall then be under any liability to any Underwriter except as provided in Sections 7 and 9 hereof; but, if for any other reason, any ADSs are not delivered by or on behalf of the Company as provided herein, the Company and each of the Founders will, upon the occurrence of any failure to complete the sale and delivery of the ADSs, promptly (and, in any event, not later than 30 days), jointly and severally, reimburse the Underwriters through you for all out-of-pocket expenses approved in writing by you, including fees and disbursements of counsel, reasonably incurred by the Underwriters in making preparations for the purchase, sale and delivery of the ADSs not so delivered, but the Company and the Founders shall then be under no further liability to any Underwriter in respect of the ADSs not so delivered except as provided in Sections 7 and 9 hereof.

13. In all dealings hereunder, you shall act on behalf of each of the Underwriters, and the parties hereto shall be entitled to act and rely upon any statement, request, notice or agreement on behalf of any Underwriter made or given by you. All statements, requests, notices and agreements hereunder shall be in writing, and if to the Underwriters shall be delivered or sent by mail, telex or facsimile transmission to you as the Representative at Credit Suisse Securities (USA) LLC, Eleven Madison Avenue, New York, N.Y. 10010-3629, Attention: Legal & Compliance Department – Investment Banking Division; if to the Company shall be delivered or sent by mail, telex or facsimile transmission to the address of the Company set forth in the Registration Statement, Attention: Longgen Zhang, Chief Financial Officer; if to the Founders shall be delivered or sent by mail, telex or facsimile transmission to the address of the Company set forth in the Registration Statement, Attention: Xiande Li, Kangping Chen and Xianhua Li, as the case may be; provided, however, that any notice to an Underwriter pursuant to Section 9(c) hereof shall be delivered or sent by mail, telex or facsimile transmission to such Underwriter at its address set forth in its Underwriters’ Questionnaire, or telex constituting such Questionnaire, which address will be supplied to the Company by you upon request. Any such statements, requests, notices or agreements shall take effect upon receipt thereof.

 

37


In accordance with the requirements of the USA Patriot Act (Title III of Pub. L. 107-56 (signed into law October 26, 2001)), the Underwriters are required to obtain, verify and record information that identifies their respective clients, including the Company, which information may include the name and address of their respective clients, as well as other information that will allow the Underwriters to properly identify their respective clients.

14. This Agreement shall be binding upon, and inure solely to the benefit of, the Underwriters, the Company, the Founders and, to the extent provided in Sections 9 and 11 hereof, the officers and directors of the Company and each person who controls the Company or any Underwriter, and their respective heirs, executors, administrators, successors and assigns, and no other person shall acquire or have any right under or by virtue of this Agreement. No purchaser of any of the ADSs from any Underwriter shall be deemed a successor or assign by reason merely of such purchase.

15. Each of the parties hereto irrevocably (i) agrees that any legal suit, action or proceeding against the Company or the Founders brought by any Underwriter or by any person who controls any Underwriter arising out of or based upon this Agreement or the transactions contemplated hereby may be instituted in any state or federal court in the Borough of Manhattan, The City of New York, New York (each a “New York Court”), (ii) waives, to the fullest extent it may effectively do so, any objection which it may now or hereafter have to the laying of venue of any such proceeding and (iii) submits to the exclusive jurisdiction of such courts in any such suit, action or proceeding. Each of the Company and the Founders irrevocably waives any immunity to jurisdiction to which it may otherwise be entitled or become entitled (including sovereign immunity, immunity to pre-judgment attachment, post-judgment attachment and execution) in any legal suit, action or proceeding against it arising out of or based on this Agreement or the transactions contemplated hereby which is instituted in any New York Court. Each of the Company and the Founders has appointed CT Corporation System, 111 Eighth Avenue, New York, New York, as its authorized agent (the “Authorized Agent”) upon whom process may be served in any such action arising out of or based on this Agreement or the transactions contemplated hereby which may be instituted in any New York Court by any Underwriter or by any person who controls any Underwriter, expressly consents to the jurisdiction of any such court in respect of any such action, and waives any other requirements of or objections to personal jurisdiction with respect thereto. Such appointments shall be irrevocable. Each of the Company and the Founders represents and warrants that the Authorized Agent has agreed to act as such agent for service of process and agrees to take any and all action, including the filing of any and all documents and instruments, that may be necessary to continue such appointment in full force and effect as aforesaid; provided that if for any reason the Authorized Agent named above ceases to act as Authorized Agent hereunder for the Company and the Founders, the Company and the Founders will appoint another person acceptable to the Representatives in the Borough of Manhattan, The City of New York, New York, as Authorized Agent. Service of process upon the Authorized Agent and written notice of such service to the Company shall be deemed, in every respect, effective service of process upon the Company and the Founders, as the case may be.

 

38


16. In respect of any judgment or order given or made for any amount due hereunder that is expressed and paid in a currency (the “judgment currency”) other than United States dollars, the Company and the Founders, as the case may be, will indemnify each Underwriter against any loss incurred by such Underwriter as a result of any variation as between (i) the rate of exchange at which the United States dollar amount is converted into the judgment currency for the purpose of such judgment or order and (ii) the rate of exchange at which an Underwriter is able to purchase United States dollars with the amount of the judgment currency actually received by such Underwriter. The foregoing indemnity shall constitute a separate and independent obligation of the Company and the Founders and shall continue in full force and effect notwithstanding any such judgment or order as aforesaid. The term “rate of exchange” shall include any premiums and costs of exchange payable in connection with the purchase of or conversion into United States dollars.

17. Time shall be of the essence of this Agreement. As used herein, the term “business day” shall mean any day when the Commission’s office in Washington, D.C. is open for business.

18. Each of the Company and the Founders acknowledges and agrees that (i) the purchase and sale of the ADSs pursuant to this Agreement is an arm’s-length commercial transaction between the Company, on the one hand, and the several Underwriters, on the other, (ii) in connection therewith and with the process leading to such transaction each Underwriter is acting solely as a principal and not the agent or fiduciary of the Company or any Founder, (iii) no Underwriter has assumed an advisory or fiduciary responsibility in favor of the Company, any Founder with respect to the offering contemplated hereby or the process leading thereto (irrespective of whether such Underwriter has advised or is currently advising the Company or any Founder on other matters) or any other obligation to the Company or any Founder except the obligations expressly set forth in this Agreement and (iv) each of the Company and the Founders has consulted its own legal and financial advisors to the extent it deemed appropriate. Each of the Company and the Founders agrees that it will not claim that the Underwriters, or any of them, has rendered advisory services of any nature or respect, or owes a fiduciary or similar duty to the Company or any Founder, in connection with such transaction or the process leading thereto.

19. This Agreement constitutes the entire agreement among the parties and supersedes all prior agreements and understandings (whether written or oral) among the Company, the Founders and the Underwriters, or any of them, with respect to the subject matter hereof.

20. This Agreement shall be governed by and construed in accordance with the laws of the State of New York.

21. Each of the Company, the Founders and each of the Underwriters hereby irrevocably waives, to the fullest extent permitted by applicable law, any and all right to trial by jury in any legal proceeding arising out of or relating to this Agreement or the transactions contemplated hereby.

 

39


22. This Agreement may be executed by any one or more of the parties hereto in any number of counterparts, each of which shall be deemed to be an original, but all such counterparts shall together constitute one and the same instrument.

23. Notwithstanding anything herein to the contrary, the Company is authorized to disclose to any persons the U.S. federal and state income tax treatment and tax structure of the potential transaction and all materials of any kind (including tax opinions and other tax analyses) provided to the Company relating to that treatment and structure, without the Underwriters imposing any limitation of any kind. However, any information relating to the tax treatment and tax structure shall remain confidential (and the foregoing sentence shall not apply) to the extent necessary to enable any person to comply with securities laws. For this purpose, “tax structure” is limited to any facts that may be relevant to that treatment.

If the foregoing is in accordance with your understanding, please sign and return to us seven counterparts hereof, and upon the acceptance hereof by you, on behalf of each of the Underwriters, this letter and such acceptance hereof shall constitute a binding agreement among each of the Underwriters, the Company and the Founders. It is understood that your acceptance of this letter on behalf of each of the Underwriters is pursuant to the authority set forth in a form of Agreement among Underwriters, the form of which shall be submitted to the Company and the Founders for examination upon request, but without warranty on your part as to the authority of the signers thereof.

 

40


Very truly yours,

JinkoSolar Holding Co., Ltd.

By:  

 

  Name:
  Title:
Xiande Li

 

Kangping Chen

 

Xianhua Li

 

SIGNATURE PAGE TO UNDERWRITING AGREEMENT


Accepted as of the date hereof on behalf of each of the Underwriters

 

Credit Suisse Securities (USA) LLC
By:  

 

  Name:
  Title:

SIGNATURE PAGE TO UNDERWRITING AGREEMENT


SCHEDULE I

 

Underwriter    Total Number of
Firm ADSs to be
Purchased
   Number of Optional
ADSs to be Purchased
if Maximum Option
Exercised

Credit Suisse Securities (USA) LLC

     
         

Oppenheimer & Co. Inc.

     

Roth Capital Partners, LLC.

     

Collins Stewart LLC.

     

Total

     
         

 

SCH-I


Schedule II

 

(a) Issuer Free Writing Prospectuses not included in the Pricing Disclosure Package: Electronic roadshow presentation, available at www.netroadshow.com

 

(b) Materials and information other than the Pricing Prospectus that comprise the Pricing Disclosure Package:

Pricing Information: US$             per ADS

Issuer Free Writing Prospectus: The Free Writing Prospectus filed by the Company with the Commission on             , 2010

 

SCH-II

Form of Deposit Agreement

Exhibit 4.3

 

AMENDMENT TO DEPOSIT AGREEMENT

BETWEEN

JINKOSOLAR HOLDING CO., LTD.

AND

JPMORGAN CHASE BANK, N.A. as

Depositary

AND

HOLDERS OF AMERICAN DEPOSITARY RECEIPTS

 

WORLDWIDE SECURITIES SERVICES

 

jpmorgan.com

 

  LOGO

LOGO            

 


LOGO

 

AMENDMENT NO. 1, dated as of May     , 2010 (the “Amendment”), to the Deposit Agreement dated as of February 9, 2010 (as amended hereby, the “Deposit Agreement”) among JinkoSolar Holding Co., Ltd., incorporated under the laws of the Cayman Islands (the “Company”), JPMorgan Chase Bank, N.A., as depositary (the “Depositary”), and all holders from time to time of American depositary receipts (“ADRs”) issued thereunder.

W I T N E S S E T H:

WHEREAS, the Company and the Depositary executed the Deposit Agreement for the purposes set forth therein; and

WHEREAS, pursuant to paragraph (16) of the form of ADR contained in the Deposit Agreement, the Company and the Depositary desire to amend the terms of the Deposit Agreement and ADRs.

NOW, THEREFORE, for good and valuable consideration, the receipt and sufficiency of which are hereby acknowledged, the Company and the Depositary hereby agree to amend the Deposit Agreement as follows:

ARTICLE I

DEFINITIONS

SECTION 1.01. Definitions. Unless otherwise defined in this Amendment, all capitalized terms used, but not otherwise defined, herein shall have the meaning given to such terms in the Deposit Agreement.

ARTICLE II

AMENDMENTS TO DEPOSIT AGREEMENT

SECTION 2.01. All references in the Deposit Agreement to the term “Deposit Agreement” shall, as of the date hereof, refer to the Deposit Agreement, dated as of February 9, 2010 as amended by this Amendment.

SECTION 2.02. Section 1(c) of the Deposit Agreement is amended by replacing “two” with “four”.

SECTION 2.03. Section 17(a) of the Deposit Agreement is amended to read as follows:

 

  (a) JPMorgan Chase Bank, N.A.

1 Chase Manhattan Plaza, Floor 58

New York, NY, 10005-1401

Attention: ADR Administration

Fax: (212) 552-6650

 

2


LOGO

 

ARTICLE III

AMENDMENTS TO THE FORM OF ADR

SECTION 3.01. All references in the form of ADR to the number of Shares represented by each ADS is amended to reflect that each ADS represents four Shares.

SECTION 3.02. The form of ADR, reflecting the amendments set forth in Section 3.01 hereof, is amended and restated to read as set forth as Exhibit A hereto.

ARTICLE IV

REPRESENTATIONS AND WARRANTIES

SECTION 4.01. Representations and Warranties. The Company represents and warrants to, and agrees with, the Depositary, that:

(a) This Amendment, when executed and delivered by the Company, will be duly and validly authorized, executed and delivered by the Company, and it and the Deposit Agreement as amended hereby constitute the legal, valid and binding obligations of the Company, enforceable against the Company in accordance with their respective terms, subject to bankruptcy, insolvency, fraudulent transfer, moratorium and similar laws of general applicability relating to or affecting creditors’ rights and to general equity principles; and

(b) In order to ensure the legality, validity, enforceability or admissibility into evidence of this Amendment or the Deposit Agreement as amended hereby, neither of such agreements need to be filed or recorded with any court or other authority in the Cayman Islands or The People’s Republic of China (including the Hong Kong Special Administrative Region, the People’s Republic of China), nor does any stamp or similar tax or governmental charge need to be paid in the Cayman Islands or The People’s Republic of China (including the Hong Kong Special Administrative Region, the People’s Republic of China) on or in respect of such agreements.

 

3


LOGO

 

ARTICLE V

MISCELLANEOUS

SECTION 5.01. Indemnification. The parties hereto shall be entitled to the benefits of the indemnification provisions of Section 16 of the Deposit Agreement in connection with any and all liability it or they may incur as a result of the terms of this Amendment and the transactions contemplated herein.

SECTION 5.02. Counterparts. This Amendment may be executed in any number of counterparts, each of which shall be deemed an original and all of which taken together shall constitute one instrument.

IN WITNESS WHEREOF, JINKOSOLAR HOLDING CO., LTD. and JPMORGAN CHASE BANK, N.A. have duly executed this Amendment No. 1 to Deposit Agreement as of the day and year first above set forth and all holders of ADRs shall become parties hereto upon acceptance by them of ADRs issued in accordance with the terms hereof.

 

JINKOSOLAR HOLDING CO., LTD.

By:                                                                                                  

Name:

Title

JPMORGAN CHASE BANK, N.A.

By:                                                                                                  

Name:

Title: Vice President

 

4


LOGO

 

EXHIBIT A

ANNEXED TO AND INCORPORATED IN

AMENDMENT TO DEPOSIT AGREEMENT

[FORM OF FACE OF ADR]

 

                  No. of ADSs:
Number     
     Each ADS represents
     Four Shares
     CUSIP:

AMERICAN DEPOSITARY RECEIPT

evidencing

AMERICAN DEPOSITARY SHARES

representing

ORDINARY SHARES

of

JINKOSOLAR HOLDING CO., LTD.

(Incorporated under the laws of the Cayman Islands)

JPMORGAN CHASE BANK, N.A., a national banking association organized under the laws of the United States of America, as depositary hereunder (the “Depositary”), hereby certifies that              is the registered owner (a “Holder”) of American Depositary Shares (“ADSs”), each (subject to paragraph (13)) representing four ordinary shares (including the rights to receive Shares described in paragraph (1), “Shares” and, together with any other securities, cash or property from time to time held by the Depositary in respect or in lieu of deposited Shares, the “Deposited Securities”), of JinkoSolar Holding Co., Ltd., a corporation organized under the laws of the Cayman Islands (the “Company”), deposited under the Deposit Agreement dated as of February 9, 2010 (as amended from time to time, the “Deposit Agreement”) among the Company, the Depositary and all Holders from time to time of American Depositary Receipts issued thereunder (“ADRs”), each of whom by accepting an ADR becomes a party thereto. The Deposit Agreement and this ADR (which includes the provisions set forth on the reverse hereof) shall be governed by and construed in accordance with the laws of the State of New York.

 

A-1


LOGO

 

(1) Issuance of ADRs; Pre-Release. This ADR is one of the ADRs issued under the Deposit Agreement. Subject to paragraph (4), the Depositary may so issue ADRs for delivery at the Transfer Office (defined in paragraph (3)) only against deposit of: (a) Shares in form satisfactory to the Custodian; (b) rights to receive Shares from the Company or any registrar, transfer agent, clearing agent or other entity recording Share ownership or transactions; or, (c) in accordance with the next sub-paragraph of this paragraph (1).

In its capacity as Depositary, the Depositary shall not lend Shares or ADSs; provided, however, that the Depositary may (i) issue ADSs prior to the receipt of Shares and (ii) deliver Shares prior to the receipt of ADSs for withdrawal of Deposited Securities, including ADSs which were issued under (i) above but for which Shares may not have been received (each such transaction a “Pre-Release”). The Depositary may receive ADSs in lieu of Shares under (i) above (which ADSs will promptly be canceled by the Depositary upon receipt by the Depositary) and receive Shares in lieu of ADSs under (ii) above. Each such Pre-Release will be subject to a written agreement whereby the person or entity (the “Applicant”) to whom ADSs or Shares are to be delivered (a) represents that at the time of the Pre-Release the Applicant or its customer owns the Shares or ADSs that are to be delivered by the Applicant under such Pre-Release, (b) agrees to indicate the Depositary as owner of such Shares or ADSs in its records and to hold such Shares or ADSs in trust for the Depositary until such Shares or ADSs are delivered to the Depositary or the Custodian, (c) unconditionally guarantees to deliver to the Depositary or the Custodian, as applicable, such Shares or ADSs, and (d) agrees to any additional restrictions or requirements that the Depositary deems appropriate. Each such Pre-Release will be at all times fully collateralized with cash, U.S. government securities or such other collateral as the Depositary deems appropriate, terminable by the Depositary on not more than five (5) business days’ notice and subject to such further indemnities and credit regulations as the Depositary deems appropriate. The Depositary will normally limit the number of ADSs and Shares involved in such Pre-Release at any one time to thirty percent (30%) of the ADSs outstanding (without giving effect to ADSs outstanding under (i) above), provided, however, that the Depositary reserves the right to change or disregard such limit from time to time as it deems appropriate. The Depositary may also set limits with respect to the number of ADSs and Shares involved in Pre-Release with any one person on a case-by-case basis as it deems appropriate. The Depositary may retain for its own account any compensation received by it in conjunction with the foregoing. Collateral provided pursuant to (b) above, but not the earnings thereon, shall be held for the benefit of the Holders (other than the Applicant).

 

A-2


LOGO

 

Every person depositing Shares under the Deposit Agreement represents and warrants that such Shares are validly issued and outstanding, fully paid, nonassessable and free of pre-emptive rights, that the person making such deposit is duly authorized so to do and that such Shares (A) are not “restricted securities” as such term is defined in Rule 144 under the Securities Act of 1933 (“Restricted Securities”) unless at the time of deposit the requirements of paragraphs (c), (e), (f) and (h) of Rule 144 shall not apply and such Shares may be freely transferred and may otherwise be offered and sold freely in the United States or (B) have been registered under the Securities Act of 1933. To the extent the person depositing Shares is an “affiliate” of the Company as such term is defined in Rule 144, the person also represents and warrants that upon the sale of the ADSs, all of the provisions of Rule 144 which enable the Shares to be freely sold (in the form of ADSs) will be fully complied with and, as a result thereof, all of the ADSs issued in respect of such Shares will not be on the sale thereof, Restricted Securities. Such representations and warranties shall survive the deposit of Shares and issuance of ADRs. The Depositary will not knowingly accept for deposit under the Deposit Agreement any Shares required to be registered under the Securities Act of 1933 and not so registered; the Depositary may refuse to accept for such deposit any Shares identified by the Company in order to facilitate the Company’s compliance with such Act.

(2) Withdrawal of Deposited Securities. Subject to paragraphs (4) and (5), upon surrender of (i) a certificated ADR in form satisfactory to the Depositary at the Transfer Office or (ii) proper instructions and documentation in the case of a Direct Registration ADR, the Holder hereof is entitled to delivery at, or to the extent in dematerialized form from, the Custodian’s office of the Deposited Securities at the time represented by the ADSs evidenced by this ADR, provided that the Depositary may deliver Shares prior to the receipt of ADSs for withdrawal of Deposited Securities, including ADSs which were issued under (1) above but for which Shares may not have been received (until such ADSs are actually deposited, “Pre-released Shares”) only if all the conditions in (1) above related to such Pre-Release are satisfied). At the request, risk and expense of the Holder hereof, the Depositary may deliver such Deposited Securities at such other place as may have been requested by the Holder. Notwithstanding any other provision of the Deposit Agreement or this ADR, the withdrawal of Deposited Securities may be restricted only for the reasons set forth in General Instruction I.A.(1) of Form F-6 (as such instructions may be amended from time to time) under the Securities Act of 1933.

 

A-3


LOGO

 

(3) Transfers of ADRs. The Depositary or its agent will keep, at a designated transfer office (the “Transfer Office”), (a) a register (the “ADR Register”) for the registration, registration of transfer, combination and split-up of ADRs, and, in the case of Direct Registration ADRs, shall include the Direct Registration System, which at all reasonable times will be open for inspection by Holders and the Company for the purpose of communicating with Holders in the interest of the business of the Company or a matter relating to the Deposit Agreement and (b) facilities for the delivery and receipt of ADRs. The term ADR Register includes the Direct Registration System. Title to this ADR (and to the Deposited Securities represented by the ADSs evidenced hereby), when properly endorsed (in the case of ADRs in certificated form) or upon delivery to the Depositary of proper instruments of transfer, is transferable by delivery with the same effect as in the case of negotiable instruments under the laws of the State of New York; provided that the Depositary, notwithstanding any notice to the contrary, may treat the person in whose name this ADR is registered on the ADR Register as the absolute owner hereof for all purposes and neither the Depositary nor the Company will have any obligation or be subject to any liability under the Deposit Agreement to any holder of an ADR, unless such holder is the Holder thereof. Subject to paragraphs (4) and (5), this ADR is transferable on the ADR Register and may be split into other ADRs or combined with other ADRs into one ADR, evidencing the aggregate number of ADSs surrendered for split-up or combination, by the Holder hereof or by duly authorized attorney upon surrender of this ADR at the Transfer Office properly endorsed (in the case of ADRs in certificated form) or upon delivery to the Depositary of proper instruments of transfer and duly stamped as may be required by applicable law; provided that the Depositary may close the ADR Register at any time or from time to time when deemed expedient by it or when requested by the Company in order to comply with applicable law. At the request of a Holder, the Depositary shall, for the purpose of substituting a certificated ADR with a Direct Registration ADR, or vice versa, execute and deliver a certificated ADR or a Direct Registration ADR, as the case may be, for any authorized number of ADSs requested, evidencing the same aggregate number of ADSs as those evidenced by the certificated ADR or Direct Registration ADR, as the case may be, substituted.

(4) Certain Limitations. Prior to the issue, registration, registration of transfer, split-up or combination of any ADR, the delivery of any distribution in respect thereof, or, subject to the last sentence of paragraph (2), the withdrawal of any Deposited Securities, and from time to time in the case of clause (b)(ii) of this paragraph (4), the Company, the Depositary or the Custodian may require: (a) payment with respect thereto of (i) any stock transfer or other tax or other governmental charge, (ii) any stock transfer or registration fees in effect for the registration of transfers of Shares or other Deposited Securities upon any applicable register and (iii) any applicable charges as provided in paragraph (7) of this ADR; (b) the production of proof satisfactory to it of (i) the identity of any signatory and genuineness of any signature and (ii) such other information, including without limitation, information as to citizenship, residence, exchange control approval, beneficial ownership of any securities, compliance with applicable law, regulations, provisions of or governing Deposited Securities and terms of the Deposit Agreement and this ADR, as it may deem necessary or proper; and (c) compliance with such regulations as the Depositary may establish consistent with the Deposit Agreement. The issuance of ADRs, the acceptance of deposits of Shares, the registration, registration of transfer, split-up or combination of ADRs or, subject to the last sentence of paragraph (2), the withdrawal of Deposited Securities may be suspended, generally or in particular instances, when the ADR Register or any register for Deposited Securities is closed or when any such action is deemed advisable by the Depositary.

 

A-4


LOGO

 

(5) Taxes. If any tax or other governmental charge shall become payable by or on behalf of the Custodian or the Depositary with respect to this ADR, any Deposited Securities represented by the ADSs evidenced hereby or any distribution thereon, such tax or other governmental charge shall be paid by the Holder hereof to the Depositary. The Depositary may refuse to effect any registration, registration of transfer, split-up or combination hereof or, subject to the last sentence of paragraph (2), any withdrawal of such Deposited Securities until such payment is made. The Depositary may also deduct from any distributions on or in respect of Deposited Securities, or may sell by public or private sale for the account of the Holder hereof any part or all of such Deposited Securities (after attempting by reasonable means to notify the Holder hereof prior to such sale), and may apply such deduction or the proceeds of any such sale in payment of such tax or other governmental charge, the Holder hereof remaining liable for any deficiency, and shall reduce the number of ADSs evidenced hereby to reflect any such sales of Shares. In connection with any distribution to Holders, the Company will remit to the appropriate governmental authority or agency all amounts (if any) required to be withheld and owing to such authority or agency by the Company; and the Depositary and the Custodian will remit to the appropriate governmental authority or agency all amounts (if any) required to be withheld and owing to such authority or agency by the Depositary or the Custodian. If the Depositary determines that any distribution in property other than cash (including Shares or rights) on Deposited Securities is subject to any tax that the Depositary or the Custodian is obligated to withhold, the Depositary may dispose of all or a portion of such property in such amounts and in such manner as the Depositary deems necessary and practicable to pay such taxes, by public or private sale, and the Depositary shall distribute the net proceeds of any such sale or the balance of any such property after deduction of such taxes to the Holders entitled thereto. Each Holder of an ADR or an interest therein agrees to indemnify the Depositary, the Company, the Custodian and any of their respective directors, employees, agents and affiliates against, and hold each of them harmless from, any claims by any governmental authority with respect to taxes, additions to tax, penalties or interest arising out of any refund of taxes, reduced rate of withholding at source or other tax benefit obtained.

 

A-5


LOGO

 

(6) Disclosure of Interests. To the extent that the provisions of or governing any Deposited Securities may require disclosure of or impose limits on beneficial or other ownership of Deposited Securities, other Shares and other securities and may provide for blocking transfer, voting or other rights to enforce such disclosure or limits, Holders and all persons holding ADRs agree to comply with all such disclosure requirements and ownership limitations and to comply with any reasonable Company instructions in respect thereof. The Company reserves the right to instruct Holders to deliver their ADSs for cancellation and withdrawal of the Deposited Securities so as to permit the Company to deal directly with the Holder thereof as a holder of Shares and Holders agree to comply with such instructions. The Depositary agrees to cooperate with the Company in its efforts to inform Holders of the Company’s exercise of its rights under this paragraph and agrees to consult with, and provide reasonable assistance without risk, liability or expense on the part of the Depositary, to the Company on the manner or manners in which it may enforce such rights with respect to any Holder.

(7) Charges of Depositary. The Depositary may charge, and collect from, (i) each person to whom ADSs are issued, including, without limitation, issuances against deposits of Shares, issuances in respect of Share Distributions, Rights and Other Distributions (as such terms are defined in paragraph (10)), issuances pursuant to a stock dividend or stock split declared by the Company, or issuances pursuant to a merger, exchange of securities or any other transaction or event affecting the ADSs or the Deposited Securities, and (ii) each person surrendering ADSs for withdrawal of Deposited Securities or whose ADSs are cancelled or reduced for any other reason, U.S.$5.00 for each 100 ADSs (or portion thereof) issued, delivered, reduced, cancelled or surrendered (as the case may be). The Depositary may sell (by public or private sale) sufficient securities and property received in respect of Share Distributions, Rights and Other Distributions prior to such deposit to pay such charge. The following additional charges shall be incurred by the Holders, by any party depositing or withdrawing Shares or by any party surrendering ADSs, to whom ADSs are issued (including, without limitation, issuance pursuant to a stock dividend or stock split declared by the Company or an exchange of stock regarding the ADSs or the Deposited Securities or a distribution of ADSs pursuant to paragraph (10)), whichever is applicable (i) a fee of U.S.$0.05 or less per ADS (or portion thereof) for any Cash distribution made pursuant to the Deposit Agreement, (ii) a fee of U.S.$1.50 per ADR or ADRs for transfers made pursuant to paragraph (3) hereof, (iii) a fee for the distribution or sale of securities pursuant to paragraph (10) hereof, such fee being in an amount equal to the fee for the execution and delivery of ADSs referred to above which would have been charged as a result of the deposit of such securities (for purposes of this paragraph (7) treating all such securities as if they were Shares) but which securities or the net cash proceeds from the sale thereof are instead distributed by the Depositary to Holders entitled thereto, (iv) an aggregate fee of U.S.$0.05 per ADS per calendar year (or portion thereof) for services performed by the Depositary in administering the ADRs (which fee may be charged on a periodic basis during each calendar year and shall be assessed against Holders as of the record date or record dates set by the Depositary during each calendar year and shall be payable at the sole discretion of the Depositary by billing such Holders or by deducting such charge from one or more cash dividends or other cash distributions), and (v) reimbursement of such fees, charges and expenses as are incurred by the Depositary and/or any of the Depositary’s agents (including, without limitation, the Custodian and expenses incurred on behalf of Holders in connection with compliance with foreign exchange control regulations or any law or regulation relating to foreign investment) in connection with the servicing of the Shares or other Deposited Securities, the delivery of Deposited Securities or otherwise in connection with the Depositary’s or its Custodian’s compliance with applicable law, rule or regulation (which charge shall be assessed on a proportionate basis against Holders as of the record date or dates set by the depositary and shall be payable at the sole discretion of the Depositary by billing such Holders or by deducting such charge from one or more cash dividends or other cash distributions). The Company will pay all other charges and expenses of the Depositary and any agent of the Depositary (except the Custodian) pursuant to agreements from time to time between the Company and the Depositary, except (i) stock transfer or other taxes and other governmental charges (which are payable by Holders or persons depositing Shares), (ii) cable, telex and facsimile transmission and delivery charges incurred at the request of persons depositing, or Holders delivering Shares, ADRs or Deposited Securities (which are payable by such persons or Holders), (iii) transfer or registration fees for the registration or transfer of Deposited Securities on any applicable register in connection with the deposit or withdrawal of Deposited Securities (which are payable by persons depositing Shares or Holders withdrawing Deposited Securities; there are no such fees in respect of the Shares as of the date of the Deposit Agreement), and (iv) expenses of the Depositary in connection with the conversion of foreign currency into U.S. dollars (which are paid out of such foreign currency). Such charges may at any time and from time to time be changed by agreement between the Company and the Depositary.

 

A-6


LOGO

 

(8) Available Information. The Deposit Agreement, the provisions of or governing Deposited Securities and any written communications from the Company, which are both received by the Custodian or its nominee as a holder of Deposited Securities and made generally available to the holders of Deposited Securities, are available for inspection by Holders at the offices of the Depositary and the Custodian and at the Transfer Office. The Depositary will distribute copies of such communications (or English translations or summaries thereof) to Holders when furnished by the Company. The Company is subject to the periodic reporting requirements of the Securities Exchange Act of 1934 and accordingly files certain reports with the United States Securities and Exchange Commission (the “Commission”). Such reports and other information may be inspected and copied at public reference facilities maintained by the Commission located at the date hereof at 100 F Street, NE, Washington, DC 20549.

(9) Execution. This ADR shall not be valid for any purpose unless executed by the Depositary by the manual or facsimile signature of a duly authorized officer of the Depositary.

Dated:

 

JPMORGAN CHASE BANK, N.A., as Depositary

By                                                                                                   

Authorized Officer

The Depositary’s office is located at 1 Chase Manhattan Plaza, Floor 58, New York, NY, 10005-1401.

 

A-7


LOGO

 

[FORM OF REVERSE OF ADR]

(10) Distributions on Deposited Securities. Subject to paragraphs (4) and (5), to the extent practicable, the Depositary will distribute to each Holder entitled thereto on the record date set by the Depositary therefor at such Holder’s address shown on the ADR Register, in proportion to the number of Deposited Securities (on which the following distributions on Deposited Securities are received by the Custodian) represented by ADSs evidenced by such Holder’s ADRs: (a) Cash. Any U.S. dollars available to the Depositary resulting from a cash dividend or other cash distribution or the net proceeds of sales of any other distribution or portion thereof authorized in this paragraph (10) (“Cash”), on an averaged or other practicable basis, subject to (i) appropriate adjustments for taxes withheld, (ii) such distribution being impermissible or impracticable with respect to certain Holders, and (iii) deduction of the Depositary’s expenses in (1) converting any foreign currency to U.S. dollars by sale or in such other manner as the Depositary may determine to the extent that it determines that such conversion may be made on a reasonable basis, (2) transferring foreign currency or U.S. dollars to the United States by such means as the Depositary may determine to the extent that it determines that such transfer may be made on a reasonable basis, (3) obtaining any approval or license of any governmental authority required for such conversion or transfer, which is obtainable at a reasonable cost and within a reasonable time and (4) making any sale by public or private means in any commercially reasonable manner. (b) Shares. (i) Additional ADRs evidencing whole ADSs representing any Shares available to the Depositary resulting from a dividend or free distribution on Deposited Securities consisting of Shares (a “Share Distribution”) and (ii) U.S. dollars available to it resulting from the net proceeds of sales of Shares received in a Share Distribution, which Shares would give rise to fractional ADSs if additional ADRs were issued therefor, as in the case of Cash. (c) Rights. (i) Warrants or other instruments in the discretion of the Depositary representing rights to acquire additional ADRs in respect of any rights to subscribe for additional Shares or rights of any nature available to the Depositary as a result of a distribution on Deposited Securities (“Rights”), to the extent that the Company timely furnishes to the Depositary evidence satisfactory to the Depositary that the Depositary may lawfully distribute the same (the Company has no obligation to so furnish such evidence), or (ii) to the extent the Company does not so furnish such evidence and sales of Rights are practicable, any U.S. dollars available to the Depositary from the net proceeds of sales of Rights as in the case of Cash, or (iii) to the extent the Company does not so furnish such evidence and such sales cannot practicably be accomplished by reason of the nontransferability of the Rights, limited markets therefor, their short duration or otherwise, nothing (and any Rights may lapse). (d) Other Distributions. (i) Securities or property available to the Depositary resulting from any distribution on Deposited Securities other than Cash, Share Distributions and Rights (“Other Distributions”), by any means that the Depositary may deem equitable and practicable, or (ii) to the extent the Depositary deems distribution of such securities or property not to be equitable and practicable, any U.S. dollars available to the Depositary from the net proceeds of sales of Other Distributions as in the case of Cash. Such U.S. dollars available will be distributed by checks drawn on a bank in the United States for whole dollars and cents. Fractional cents will be withheld without liability and dealt with by the Depositary in accordance with its then current practices.

 

A-8


LOGO

 

(11) Record Dates. The Depositary may, after consultation with the Company if practicable, fix a record date (which, to the extent applicable, shall be as near as practicable to any corresponding record date set by the Company) for the determination of the Holders who shall be responsible for the fee assessed by the Depositary for administration of the ADR program and for any expenses provided for in paragraph (7) hereof as well as for the determination of the Holders who shall be entitled to receive any distribution on or in respect of Deposited Securities, to give instructions for the exercise of any voting rights, to receive any notice or to act in respect of other matters and only such Holders shall be so entitled or obligated.

(12) Voting of Deposited Securities. As soon as practicable after receipt from the Company of notice of any meeting or solicitation of consents or proxies of holders of Shares or other Deposited Securities, the Depositary shall distribute to Holders a notice stating (a) such information as is contained in such notice and any solicitation materials, (b) that each Holder on the record date set by the Depositary therefor will, subject to any applicable provisions of Cayman Island law, be entitled to instruct the Depositary as to the exercise of the voting rights, if any, pertaining to the Deposited Securities represented by the ADSs evidenced by such Holder’s ADRs and (c) the manner in which such instructions may be given, including instructions to give a discretionary proxy to a person designated by the Company. Upon receipt of instructions of a Holder on such record date in the manner and on or before the date established by the Depositary for such purpose, the Depositary shall endeavor insofar as practicable and permitted under the provisions of or governing Deposited Securities to vote or cause to be voted the Deposited Securities represented by the ADSs evidenced by such Holder’s ADRs in accordance with such instructions. The Depositary will not itself exercise any voting discretion in respect of any Deposited Securities. There is no guarantee that Holders generally or any Holder in particular will receive the notice described above with sufficient time to enable such Holder to return any voting instructions to the Depositary in a timely manner.

(13) Changes Affecting Deposited Securities. Subject to paragraphs (4) and (5), the Depositary may, in its discretion, amend this ADR or distribute additional or amended ADRs (with or without calling this ADR for exchange) or cash, securities or property on the record date set by the Depositary therefor to reflect any change in par value, split-up, consolidation, cancellation or other reclassification of Deposited Securities, any Share Distribution or Other Distribution not distributed to Holders or any cash, securities or property available to the Depositary in respect of Deposited Securities from (and the Depositary is hereby authorized to surrender any Deposited Securities to any person and, irrespective of whether such Deposited Securities are surrendered or otherwise cancelled by operation of law, rule, regulation or otherwise, to sell by public or private sale any property received in connection with) any recapitalization, reorganization, merger, consolidation, liquidation, receivership, bankruptcy or sale of all or substantially all the assets of the Company, and to the extent the Depositary does not so amend this ADR or make a distribution to Holders to reflect any of the foregoing, or the net proceeds thereof, whatever cash, securities or property results from any of the foregoing shall constitute Deposited Securities and each ADS evidenced by this ADR shall automatically represent its pro rata interest in the Deposited Securities as then constituted.

 

A-9


LOGO

 

(14) Exoneration. The Depositary, the Company, their agents and each of them shall: (a) incur no liability (i) if any present or future law, rule, regulation, fiat, order or decree of the United States, the Cayman Islands, The People’s Republic of China (including the Hong Kong Special Administrative Region, the People’s Republic of China) or any other country, or of any governmental or regulatory authority or any securities exchange or market or automated quotation system, the provisions of or governing any Deposited Securities, any present or future provision of the Company’s charter, any act of God, war, terrorism or other circumstance beyond its control shall prevent or delay, or shall cause any of them to be subject to any civil or criminal penalty in connection with, any act which the Deposit Agreement or this ADR provides shall be done or performed by it or them (including, without limitation, voting pursuant to paragraph (12) hereof), or (ii) by reason of any exercise or failure to exercise any discretion given it in the Deposit Agreement or this ADR; (b) assume no liability except to perform its obligations to the extent they are specifically set forth in this ADR and the Deposit Agreement without gross negligence or bad faith; (c) in the case of the Depositary and its agents, be under no obligation to appear in, prosecute or defend any action, suit or other proceeding in respect of any Deposited Securities or this ADR; (d) in the case of the Company and its agents hereunder be under no obligation to appear in, prosecute or defend any action, suit or other proceeding in respect of any Deposited Securities or this ADR, which in its opinion may involve it in expense or liability, unless indemnity satisfactory to it against all expense (including fees and disbursements of counsel) and liability be furnished as often as may be required; or (e) not be liable for any action or inaction by it in reliance upon the advice of or information from legal counsel, accountants, any person presenting Shares for deposit, any Holder, or any other person believed by it to be competent to give such advice or information. The Depositary shall not be liable for the acts or omissions made by any securities depository, clearing agency or settlement system in connection with or arising out of book-entry settlement of Deposited Securities or otherwise. The Depositary shall not be responsible for, and shall incur no liability in connection with or arising from, the insolvency of any Custodian that is not a branch or affiliate of JPMorgan Chase Bank, N.A. The Depositary, its agents and the Company may rely and shall be protected in acting upon any written notice, request, direction or other document believed by them to be genuine and to have been signed or presented by the proper party or parties. The Depositary and its agents will not be responsible for any failure to carry out any instructions to vote any of the Deposited Securities, for the manner in which any such vote is cast or for the effect of any such vote. The Depositary and its agents may own and deal in any class of securities of the Company and its affiliates and in ADRs. Notwithstanding anything to the contrary set forth in the Deposit Agreement or an ADR, the Depositary and its agents may fully respond to any and all demands or requests for information maintained by or on its behalf in connection with the Deposit Agreement, any Holder or Holders, any ADR or ADRs or otherwise related hereto or thereto to the extent such information is requested or required by or pursuant to any lawful authority, including without limitation laws, rules, regulations, administrative or judicial process, banking, securities or other regulators. None of the Depositary, the Custodian or the Company shall be liable for the failure by any Holder or beneficial owner to obtain the benefits of credits on the basis of non-U.S. tax paid against such Holder’s or beneficial owner’s income tax liability. The Depositary and the Company shall not incur any liability for any tax consequences that may be incurred by Holders and beneficial owners on account of their ownership of the ADRs or ADSs. The Company has agreed to indemnify the Depositary and its agents under certain circumstances and the Depositary has agreed to indemnify the Company under certain circumstances. Neither the Company nor the Depositary nor any of their agents shall be liable to Holders or beneficial owners of interests in ADSs for any indirect, special, punitive or consequential damages (including, without limitation, lost profits) of any form incurred by any person or entity, whether or not foreseeable and regardless of the type of action in which such a claim may be brought. No disclaimer of liability under the Securities Act of 1933 is intended by any provision hereof.

 

A-10


LOGO

 

(15) Resignation and Removal of Depositary; the Custodian. The Depositary may resign as Depositary by written notice of its election so to do delivered to the Company, such resignation to take effect upon the appointment of a successor depositary and its acceptance of such appointment as provided in the Deposit Agreement. The Depositary may at any time be removed by the Company by no less than 90 days prior written notice of such removal, to become effective upon the later of (i) the 90th day after delivery of the notice to the Depositary and (ii) the appointment of a successor depositary and its acceptance of such appointment as provided in the Deposit Agreement. The Depositary may appoint substitute or additional Custodians and the term “Custodian” refers to each Custodian or all Custodians as the context requires.

(16) Amendment. Subject to the last sentence of paragraph (2), the ADRs and the Deposit Agreement may be amended by the Company and the Depositary, provided that any amendment that imposes or increases any fees or charges (other than stock transfer or other taxes and other governmental charges, transfer or registration fees, cable, telex or facsimile transmission costs, delivery costs or other such expenses), or that shall otherwise prejudice any substantial existing right of Holders, shall become effective 30 days after notice of such amendment shall have been given to the Holders. Every Holder of an ADR at the time any amendment to the Deposit Agreement so becomes effective shall be deemed, by continuing to hold such ADR, to consent and agree to such amendment and to be bound by the Deposit Agreement as amended thereby. In no event shall any amendment impair the right of the Holder of any ADR to surrender such ADR and receive the Deposited Securities represented thereby, except in order to comply with mandatory provisions of applicable law. Any amendments or supplements which (i) are reasonably necessary (as agreed by the Company and the Depositary) in order for (a) the ADSs to be registered on Form F-6 under the Securities Act of 1933 or (b) the ADSs or Shares to be traded solely in electronic book-entry form and (ii) do not in either such case impose or increase any fees or charges to be borne by Holders, shall be deemed not to prejudice any substantial rights of Holders. Notwithstanding the foregoing, if any governmental body or regulatory body should adopt new laws, rules or regulations which would require amendment or supplement of the Deposit Agreement or the form of ADR to ensure compliance therewith, the Company and the Depositary may amend or supplement the Deposit Agreement and the ADR at any time in accordance with such changed laws, rules or regulations. Such amendment or supplement to the Deposit Agreement in such circumstances may become effective before a notice of such amendment or supplement is given to Holders or within any other period of time as required for compliance. Notice of any amendment to the Deposit Agreement or form of ADRs shall not need to describe in detail the specific amendments effectuated thereby, and failure to describe the specific amendments in any such notice shall not render such notice invalid, provided, however, that, in each such case, the notice given to the Holders identifies a means for Holders to retrieve or receive the text of such amendment (i.e., upon retrieval from the Securities and Exchange Commission’s, the Depositary’s or the Company’s website or upon request from the Depositary).

 

A-11


LOGO

 

(17) Termination. The Depositary may, and shall at the written direction of the Company, terminate the Deposit Agreement and this ADR by mailing notice of such termination to the Holders at least 30 days prior to the date fixed in such notice for such termination; provided, however, if the Depositary shall have (i) resigned as Depositary hereunder, notice of such termination by the Depositary shall not be provided to Holders unless a successor depositary shall not be operating hereunder within 45 days of the date of such resignation, or (ii) been removed as Depositary hereunder, notice of such termination by the Depositary shall not be provided to Holders unless a successor depositary shall not be operating hereunder on the 90th day after the Company’s notice of removal was first provided to the Depositary. After the date so fixed for termination, the Depositary and its agents will perform no further acts under the Deposit Agreement and this ADR, except to receive and hold (or sell) distributions on Deposited Securities and deliver Deposited Securities being withdrawn. As soon as practicable after the expiration of six months from the date so fixed for termination, the Depositary shall sell the Deposited Securities and shall thereafter (as long as it may lawfully do so) hold in a segregated account the net proceeds of such sales, together with any other cash then held by it under the Deposit Agreement, without liability for interest, in trust for the pro rata benefit of the Holders of ADRs not theretofore surrendered. After making such sale, the Depositary shall be discharged from all obligations in respect of the Deposit Agreement and this ADR, except to account for such net proceeds and other cash. After the date so fixed for termination, the Company shall be discharged from all obligations under the Deposit Agreement except for its obligations to the Depositary and its agents.

 

A-12


LOGO

 

(18) Appointment. Each Holder and each person holding an interest in ADSs, upon acceptance of any ADSs (or any interest therein) issued in accordance with the terms and conditions of the Deposit Agreement shall be deemed for all purposes to (a) be a party to and bound by the terms of the Deposit Agreement and the applicable ADR(s), and (b) appoint the Depositary its attorney-in-fact, with full power to delegate, to act on its behalf and to take any and all actions contemplated in the Deposit Agreement and the applicable ADR(s), to adopt any and all procedures necessary to comply with applicable law and to take such action as the Depositary in its sole discretion may deem necessary or appropriate to carry out the purposes of the Deposit Agreement and the applicable ADR(s), the taking of such actions to be the conclusive determinant of the necessity and appropriateness thereof.

(19) Waiver. EACH PARTY TO THE DEPOSIT AGREEMENT (INCLUDING, FOR AVOIDANCE OF DOUBT, EACH HOLDER AND BENEFICIAL OWNER AND/OR HOLDER OF INTERESTS IN ADRS) HEREBY IRREVOCABLY WAIVES, TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, ANY RIGHT IT MAY HAVE TO A TRIAL BY JURY IN ANY SUIT, ACTION OR PROCEEDING AGAINST THE DEPOSITARY AND/OR THE COMPANY DIRECTLY OR INDIRECTLY ARISING OUT OF OR RELATING TO THE SHARES OR OTHER DEPOSITED SECURITIES, THE ADSs OR THE ADRs, THE DEPOSIT AGREEMENT OR ANY TRANSACTION CONTEMPLATED HEREIN OR THEREIN, OR THE BREACH HEREOF OR THEREOF (WHETHER BASED ON CONTRACT, TORT, COMMON LAW OR ANY OTHER THEORY).

 

A-13

Contract between Jinko Solar Co., Ltd. and Miyamoto Trading Limited

Exhibit 10.55

CONTRACT

 

NO.    JINKO-K0061
DATE:    Feb. 26, 2010
THE BUYER:    NAME    : JINKO SOLAR CO., LTD
   ADDRESS    : No1# JINKO ROAD, ECONOMIC DEVELOPMENT ZONE,SHANGRAO, JIANGXI, CHINA
   TEL    : (0086)793-8461156 FAX: (0086)793-8458061
THE SELLER:    NAME    : MIYAMOTO TRADING LIMITED
   ADDRESS    : WBG W-26, 2-6 NAKASE, MIHAMA-KU, CHIBA, JAPAN
   TEL    : (0081) 43-297-8551 FAX: (0081) 43-297-8555

THIS CONTRACT IS MADE BY AND BETWEEN THE BUYER AND THE SELLER, WHEREBY THE BUYER AGREE TO BUY AND THE SELLER AGREE TO SELL THE UNDER-MENTIONED GOODS ACCORDING TO THE TERMS AND CONDITIONS STIPULATED BELOW.

 

1. NAME OF COMMODITY, QUANTITY & SPECIFICATIONS

 

MULTI BLOCK SLICER MODEL: PV800S      30 SETS
 

SEE APPENDIX No.1-5

  

 

2. TOTAL VALUE

CIF SHANGHAI SEAPORT JP¥****.-

 

3. COUNTRY OF ORIGIN AND MANUFACTURERS

NIPPEI TOYAMA CORPORATION. (JAPAN)

 

4. TIME OF DELIVERY

****SET: WITHIN ****MONTHS AFTER ECEIPT OF BUYER’S T/T REMITANCE IN ADVANCE PAYMENT.

****SET: WITHIN ****MONTHS AFTER ECEIPT OF BUYER’S T/T REMITANCE IN ADVANCE PAYMENT.

****SET: WITHIN ****MONTHS AFTER ECEIPT OF BUYER’S T/T REMITANCE IN ADVANCE PAYMENT.

 

5. PORT OF SHIPMENT

YOKOHAMA, JAPAN

 

6. PORT OF DESTINATION

SHANGHAI, CHINA

 

7.         SHIPPING MARK

  

    JINKO-K0061      

   SHANGHAI CHINA

 

 

**** Confidential material omitted and filed separately with the Commission.

1


8. PAYMENT TERMS

AS PER REMARK

SHOPING DOCUMENTS AS FOLLOWING:

 

  a. FULL CLEAN ON BOARD B/L BLANK ENDORSED

 

  b. 5 SETS INVOICE

 

  c. 5 SETS PACKING LIST

 

  d. 1 SETMACHINE INSPECTION REPORT

 

  e. 1 SET CERTIFICATE OF ORIGIN BY MANUFACTURERS

 

  f. 1 SET CERTIFICATE OF MARINE INSURANCE

 

9. SHIPPING ADVISE

IMMEDIATELY AFTER THE GOODS HAVE BEEN SHIPPED, THE SELLERS SHALL NOTIFY THE BUYERS BY FAX THE CONTRACT NUMBER, NAME OF GOODS, QUANTITY, WEIGHT, TOTAL VALUE, NAME AND SAILING DATE OF THE CARRYING VESSEL, AND PORT OF DESTINATION.

 

10. PACKING

TO BE PACKED IN STRONG WOODEN CASE(S), SUITABLE FOR LONG DISTANCE OCEAN TRANSPORTATION AND TO CHANGE OF CLIMATE, WELL PROTECTED AGAINST MOISTURE AND SHOCKS. THE SELLER SHALL BE LIABLE FOR ANY DAMAGE OF THE COMMODITY AND EXPENSES INCURRED ON ACCOUNT OF IMPROPER PACKING AND FOR ANY RUST ATTRIBUTABLE TO INADEQUATE OR IMPROPER PROTECTIVE MEASURES TAKEN BY THE SELLER INGARDS TO THE PACKING.

 

11. TECHNICAL DOCUMENTATION: AS APPENDIX No.2

 

12. GUARANTEE OF QUALITY AND CLAIMS

WITHIN THE GUARANTEE PERIOD, HEREOF, SHOULD THE QUALITY AND/OR THE SPECIFICATIONS OF THE GOODS BE FOUND NOT IN CONFORMITY WITH THE CONTRACTED STIPULATIONS, OR SHOULD THE GOODS BE PROVED DEFECTIVE FOR ANY REASONS, INCLUDING LATENT DEFECT OR THE USE OF UNSUITABLE MATERIALS, THE BUYER SHALL ARRANGE FOR AN INSPECTION TO BE CARRIED OUT BY CHINA COMMODITY INSPECTION BUREAU(HEREINAFTER CALLED CCIB) AND HAVE THE RIGHT TO CLAIM AGAINST THE SELLERS ON THE STRENGTH OF THE INSPECTION CERTIFICATE ISSUED BY CCIB.

 

13. FORCE MAJEURE

THE SELLER SHALL NOT BE HELD RESPONSIBLE FOR ANY DELAY IN DELIVERY OR NON-DELIVERY OF THE GOODS DUE TO FORCE MAJEURE.HOWEVER, THE SELLER SHALL ADVISE THE BUYER IMMEDIATELY BY FAX/CABLE OF SUCH OCCURRENCE AND WITH IN FOURTEEN DAYS THEREAFTER, SEND BY THE COMPETENT GOVERNMENT AUTHORITIES OR CHAMBER OF COMMENCE OF THE PLACE WHERE THE ACCIDENT OCCURS AS EVIDENCE THEREOF.UNDER SUCH CIRCUMSTANCES THE SELLER, HOWEVER, ARE STILL UNDER THE OBLIGATION TO TAKE ALL NECESSARY MEASURES TO HASTEN THE DELIVERY OF THE GOODS.

 

14. COMMODITIES INSPECTION AND CLAIM

AFTER ARRIVAL OF THE GOODS AT THE PORT OF DESTINATION THE BUYERS SHALL APPLY TO THE CHINA COMMODITY INSPECTION BUREAU(HEREINAFTER CALLED CCIB) FOR A PRELIMINARY INSPECTION OF THE GOODS IN RESPECT OF THEIR QUALITY, SPECIFICATIONS & QUANTITY/WEIGHT OR BOTH.IF WITHIN NINETY(90)DAYS AFTER THE ARRIVAL OF THE GOODS AT THE DESTINATION, THE SPECIFICATION QUALITY AND/OR QUANTITY ARE FOUND NOT TO BE IN CONFORMITY WITH THE STIPULATIONS OF THE CONTRACT EXCEPT THOSE CLAIMS FOR WHICH THE INSURANCE COMPANY OR THE SHIPPING COMPANY IS RESPONSIBLE, THE BUYERS SHALL ON THE BASIS OF THE INSPECTION CERTIFICATE ISSUED BY CCIB, HAVE THE RIGHT TO CLAIM FOR REPLACEMENT OR COMPENSATION. IN CASE OF THE CLAIM, ALL THE RELEVANT EXPENSES(SUCH A INSPECTION CHARGE, FREIGHT FOR RETURNING THE GOODS AND FOR SENDING THE REPLACEMENT, INSURANCE PREMIUM, STORAGE AND UNLOADONG CHAREGES, ETC) SHALL BE BORNE BY THE SELLER.

 

2


15. BANKING CHARGE

DURING EXECUTION OF THIS ONTRACT, ALL THE BAKING CHARGES INCURRED IN CHINA SHALL BE BORNE BY THE BUYER WHILE ALL THE BAKING CHARGES INCURRED OUTSIDE CHINA SHALL BE BORNE BY THE SELLER.

 

16. ARBITRATION

ALL DISPUTES IU CONNECTION WITH THIS CONTRACT OR THE EXECNTION THEREOF SHALL BE SETTLED THROUGH FRIENDLY NEGOTIATIONS.IN CASE NO SETTLEMENT CAN BE REACHED THROUGH NEGOTIATIONS, THE CASE SHOULD THEN BE SUBMITTED FOR ARBITRATION TO THE FOREIGN ECONOMIC AND TRADE ARBITRATION COMMISSION OF THE CHINA COUNCIL FOR THE PROMOTION OF INTERNATIONAL TRADE, BEIJING, IN ACCORDANCE WITH THE “PROVISIONAL RULES OF PRODUCRE OF THE FOREIGN TRADE ARBITRATION COMMISSION OF THE CHINA COUNCIL FOR THE PROMOTION OF INTERNATIONAL TRADE”.

THE ARBITRAION SHALL TAKE PLACE IN BEIJING AND AWARD RENDERED BY THE SAID COMMISSION SHALL BE FINAL AND BINDING UPON BOTH PARTIES; NEITHER PARTY SHALL SEEK RECOURSE TO A LAW COURT OR OTHER ANTHORITIES FOR REVISING THE AWARD. THE ARBITRATION FEE SHALL BE BORNE BY THE LOSING PARTY.

 

17. DELAYED DELIVERY AND PENALTY

IN CASE OF DELAYED DELIVERY, EXCEPT FORCE MAJCURE CASES, THE SELLER SHALL PAY TO THE BUYER FOR EVERY WEEK OF DALAY A PENALITY AMOUNTING TO 0.5% OF THE TOTAL VALUE OF THE GOODS WHOSE DELIVERY HAS BEEN DELAYED. ANY FRACTIONAL PART OF THE WEEK IS TO BE CONSIDERED A FULL WEEK. THE TOTAL AMOUNT OF PENALITY SHALL NOT, HOWEVER, EXCEED 5% OF THE TOTAL VALUE OF THE GOODS INVOLVED IN LATE DELIVERY AND IS TO BE DEDUCTED FROM THE ANOUNT DUE TO THE SELLER BY THE PAYING BANK AT THE TIME OF NEGOTIATION, OR BY THE BUYER DIRECT AT THE TIME OF PAYMENT.

IN CASE THE PERIODE OF DELAY EXCEEDS 10 WEEKS AFTER STIPULATED DELIVERY DATE, THE BUYER HAS THE RIGHT TO TERMINATE THIS CONTRACT BUT THE SELLER SHALL NOT THEREBY BE EXEMPTED FROM THE PAYMENT OF PENALITY.

 

18. SUPPLEMENTARY CLAUSES

 

  A. ALL THE APPENDIXES ATTACHED TO THIS CONTRACT AND SIGNED BY THE SELLERS AND THE BUYERS ARE INTEGRAL PART OF THIS CONTRACT.

 

  B. THIS CONTRACT IS MADE IN CHINESE AND ENGLISH LANGUAGES.BOTH HAVE THE STATUS IN LAW.

 

REMARK    : SELLER’S BANK
NAME    : SUMITOMO MITSUI BANKING COORPORATION., CHIBA BRANCH
ADD    : 2-2-2, FUJIMI, CHIBA, JAPAN
A/C No.    : 7339235
SWIFT CODE    : SMBCJPJT

 

**** % of the total contract value: Pay by T/T before March 5th 2010

 

 

**** Confidential material omitted and filed separately with the Commission.

3


****% of the total contract value: The Buyer shall issue an Irrevocable Letter of Credit of Japanese Yen in favour of the Seller one and a half month before the shipment of equipment. ****% of the total contract value shall be paid against shipping documents, ****% of the total contract value shall be paid by L/C within 180 days from the date of the Bill of Lading, and ****% of the total contract value shall be paid by L/C within 365 days from the date of the Bill of Lading.

 

THE BUYER    THE SELLER
JINKO SOLAR CO., LTD.    MIYAMOTO TRADING LIMITED
/s/ JINKO SOLAR CO., LTD.    /s/ MIYAMOTO TRADING LIMITED

 

 

**** Confidential material omitted and filed separately with the Commission.

4


<Appendix I>

26 FEBUARY 2010

(JPY)

SUPPLY LIST

 

A    MULTI WAFER MAKER MODEL: PV800S    30SETS

A-I THIS MACHINE COMPRISES THE FOLLOWING UNITS

 

  1) MAIN SPINDEL

 

  2) REEL SPINDLE

 

  3) TRAVERSER

 

  4) DANCER ROLLER UNIT

 

  5) GUIDE ROLLER UNIT

 

  6) FEED UNIT

 

  7) SLURRY TANK

 

  8) HEAT EXCHANGER

 

  9) LUBRICATION UNIT

 

  10) MACHINE NAME PLATE (ENGLISH)

 

  11) CONTROL EQUIPMENT

 

  12) MACHINE COVER

 

  13) UPS

A-II STANDARD ACCESSORIES

 

1)    MAIN ROLLER    30SETS
2)    GUIDE ROLLER Ø****mm    30SETS
3)    EMPTY REEL BOBBIN    30SETS
4)    WORK PLATE+ADAPTER PLATE (FOR¨****XL****mm)    30SETS
5)    GROUNDING DETECT FUNCTION (FOR WATER BASE)    30SETS
6)    WIRE GROUNDING MONITOR    30SETS
7)    PARAMETER UNIT    30SETS
8)    REACTOR FOR AC SERVO MONITOR    30SETS
9)    GUIDE FOR LIFTER    30SETS
10)    PARTS FOR MACHINE INSTALLATION    30SETS
11)    OPERATION TOOLS    30SETS
12)    JIB CRAN    30SETS

 

 

**** Confidential material omitted and filed separately with the Commission.

5


 A-III NTC STANDARD ELECTRORIC SPECIFICATIONS

   30SETS
B    SPECIAL ACCESSORIES   
  

1)      FLOW METER (CORIOLI TYPE)

   30SETS
  

2)      CART WITH A LIFTER (FOR MAIN ROLLER)

     2SETS
  

3)      CART WITH A LIFTER (FOR WORK-PIECES)

     3SETS
  

4)      BELT TENSION METER

     5SETS
5)    TOOLING (FOR¨****XL****mm)    30SETS
C    INLAND FREIGHT, STANDARD EXPORT PACKING CHARGE, FOB & CIF CHAGE    30SETS
D    SUPERVISIONG FEE    30SETS
E    SPARE PARTS   
  

1)      MAIN ROLLER

     60PCS
  

2)      GUIDE ROLLER Ø****mm

   30SETS
  

3)      IMPELLER (FOR SLURRY PUMP ****kw)

     30PCS
  

4)      ADAPTER HOLDER (FOR¨****XL****mm)

     30PCS
  

5)      GUIDE ROLLER BODY FOR Ø****mm

   30SETS
  

6)      JIG FOR MAIN ROLLER EXCHANGE

   40SETS
  

7)      SPARE PARTS (AS PER ATTACHED SHEET)

       1LOT
           
   GRAND TOTAL:CIF SHANGHAI SEAPORT, CHINA      ****

 

 

**** Confidential material omitted and filed separately with the Commission.

6


PV800 EQUIPMENT SPARE PARTS

 

Order    Spare parts
3    3 PV800 cantilever cranes
4    2 PV800 Spindle guide screws
5    1 PV800 Manual controller handle
6    4 PV800 Spindle guide screw locating pads
7    2 PV800 main pressure indicators
8    3 PV800 main pressure gages
9    2 PV800 flow indicators
10    2 PV800 temperature detectors for returned mortar
11    5 PV800 thin mud trough power connector supplier
12    3 PV800 power connectors of liquid level display
13    2 PV800 small and large thin mud and heat exchanger pipe connectors respectively
14    2 PV800 correction wheel of movable frame
15    1 PV800 cantilever crane handle

 

7


<Appendix II>

PV 800S TYPE SPECIFICATION LIST OF MULTI-THREAD SLICER (Feb. 26, 2010)

 

1. Overview

This equipment is a multi-thread slicer for high wire-speed feeding, feeding wire and winding up with electronic controlled steel wire. Besides, workpiece descending is adopted in the structure and accordingly the preciseness and efficiency of the slicer have been increased.

 

2. Major specifications (capacity of the host machine)

 

  (1) Size of the maximum dividable workpiece

It is suitable for the follows if choosing outillage which can hang 3 pieces:

¨****mm* length ****mm * able to cut 1 piece at the same time

¨****mm* length ****mm * able to cut 3 pieces at the same time

It is suitable for the follows if choosing outillage which can hang 4 pieces:

¨****mm * length ****mm * able to cut 1 piece at the same time

¨****mm * length ****mm * able to cut 2 pieces at the same time

¨****mm * length ****mm * able to cut 4 pieces at the same time

 

  (2) Steel wire routing module

One-way routing and double-way routing (Accelerating and decelerating for 3 seconds, 2 circulations/minute)

 

  (3) Steel wire speed ****m/min at maximum

 

  (4) Slicing modes(feeding mode) undercutting

 

  (5) Slicing feeding (feeding) speed ****mm/min

 

  (6) Fast feeding (feeding) and fast retracting speed ****mm/min

 

  (7) Maximum steel wire deposit F****mm* ****km

 

  (8) Host machine size about 4600mm(width) * 2800 (depth) * 3120 (height)

 

  (9) Host machine weight about 17,000 kg

Weight of mortar case (containing mortar): about 1080 kg

Weight of mortar case (not containing mortar): about 440 kg

 

  (10) Machine tool noises

below 80 decibels

 

  (11) Weight of home roll

430 kg/piece

 

 

**** Confidential material omitted and filed separately with the Commission.

8


3. kinetic energy (for details refer to Item 14)

 

  (1) Power supply three phase current ’380V±10%, 50Hz

* the user’s Primary-Side power: 380V±10%, 50Hz, the transformer is arranged by the users.

 

  (2) Consumption power

Host machine is about: 165KVA (about 199KVA at maximum, 80KVA on average)

 

  (3) using compressed air (dried air)

Dry and clean compressed air with no water shall be used

Air pressure: above ****Mpa

Air volume: ****NL/min

Tubing size: Rc1/2

 

  (4) Using cooling water

(Cooling devices) supplied by the cooling devices arranged by the users

Cooling water temperature: ****¨

Cooling water flowing volume: above ****l/minute, used in heat exchanger (mortar cooling).

Above ****l/minute, used in cooling the axis

Water pressure: ****Mpa

 

  (5) Oil mist exhaust

Exhaust amount: above ****m3/min (Tubing is arranged by the users)

Outer diameter of pipeline: F****mm

 

  (6) Tubing mode and primary side power interface

Adopting tubing in the air and wire routing

 

  (7) UPS

FANUC system

 

4. Major units (devices) This multi-thread slicer is mainly composed of the following units:

 

  1) Outillage

 

  1. Size of workpiece it is suitable for the follows if choosing outillage which can hang 3 pieces:

¨****mm * length ****mm * it can cut 1 piece at the same time

¨****mm * length ****mm * it can cut 3 pieces at the same time

It is suitable for the follows if choosing outillage which can hang 4pieces:

¨****mm * length ****mm * able to cut 1 piece at the same time

¨****mm * length ****mm * able to cut 2 pieces at the same time

¨****mm * length ****mm * able to cut 4 pieces at the same time

 

  2. Outillage clamping mode: automatic clamping (clamping with spring, hydraulic unlock)

 

  3. Hydraulic devices ****kw pump, **** Mpa, ****l

 

 

**** Confidential material omitted and filed separately with the Commission.

9


  2) Main roll shaft (main axis)

 

Number of main roll shaft    2 pieces
Gap between the main roll shafts    ****mm
Output power of electric motor    ****kw * 2 sets
Rated torque of electric motor    ****Nm * 2 sets
Axis cooling mode    water cooling
Groove gap between the main roll grooves    ****mm
Outer diameter of main roll groove    F****mm—****mm
Maximum pieces of reelable wire    2650pieces (limited in the moment when
   steel wire stress is ****N)

* varied from the thickness of the pieces

 

  3) Bobbin axis

 

Maximum steel wire deposit    F****mm * ****km (maximum)
Gap between steel wire    ****mm
Output power of the electric motor    ****kw * 2sets
Bobbin arrangement mode    Standing-type

* Purchasing specification Location of the disposable bobble of TA 100 is limited in the pay-off Side (pay-off bobble). The wire gap when using new wire to wind the disposable bobble shall be controlled at ****mm.

The standard bobble manufactured by the seller is adopted for basket (non-disposable bobble)

 

  4) Bobble winding displacement transfer device

 

Route    ****mm (****mm at maximum)
Output power of the electric motor    ****kw (with brakes) * 2 sets

 

  5) Stress adjustment wheel devices

 

Route    ****mm
Steel wire stress    ****N (the standard is ****N)
Output power of the electric motor    ****kw (with brakes) * 2 sets

 

  6) Steel wire guide pulley

 

Guide pulley groove diameter    F****mm (with two grooves)
"Pieces    12pieces
"Mobile devices    Cutting devices at the wiring point inside the main rolling (used in the workpiece of length ****3 pieces) Wiring width ****mm * 3 pieces Guide wheel is increased by 10pieces per set

 

 

**** Confidential material omitted and filed separately with the Commission.

10


  7) Feeding devices

 

Route

  

****mm (****mm at maximum)

Feeding speed

  

**** mm/min

Fast feeding speed

  

**** mm/min

Output power of electric motor

  

****kw (with brake of 1/25)

 

  8) Mortar box

 

Box volume

   ****l

Pump output power

   ****kw

Stirring mill electric motor output power

   **** kw

Liquid level detection

   floating (only limited in the lower limit of detection)

Filter screen

  

Box returning opening

Upside **** meshes + downside **** meshes

 

9)          Mortar filter

   Filter mesh, mortar supply side filter **** meshes

10)       Recycling bin

   Pump output power **** kw

11)       Heat exchanger

  

Mode

   cooling water controlled, 4passageway

Exchanging heat

   nominal **** kw (**** kcal)

 

12)       Lubricating

  
   Grease lubrication (main axis, bobble axis, feeding axis, feeding axis
   Rolling ball screw, winding displacement transfer device axis)

 

13)       Machine tool label

      concentrated, in English/Japanese/Chinese

14)       Controlling devices

  

Controlling panel

   installed in the host machine
  

Operation panel

  

Colored touching screen, hanging

 

5. Standard accessories (included in the host machine)

For detailed information please refer to item A of the supply list.

 

6. Particular appendix

For detailed information please refer to Item B of the supply list.

 

7. Spare parts

For detailed information please refer to Item E of the supply list.

 

 

**** Confidential material omitted and filed separately with the Commission.

11


8. Machine tool appearance color

 

  (1) Host machine color can be specified by the users, but needs the users to provide the color sample.

 

  (2) Controlling panel color “    ”

 

  (3) Color of operational panel “    ”

 

  Note:   if not specified by the users, or they don’t provide color sample, the standard color of the manufacturer shall be adopted.

 

9. Electricity specification (NIPPEI TOYAMA Company standard specification) (NIPPEI TOYAMA company standard specification is specified based on the following specifications)

 

   

International specification              IEC204-1

 

   

European specification                    EN60242-1-15.2

 

   

American industrial mechanical electricity specification              NFPA79-16.1.1

 

   

Japanese industrial specification                                                       JIS B6015-15.2.4

 

(1)    Power voltage    3 phases 3circuits, AC200V, 50Hz
(2)    Operation voltage    AC100V, 50Hz DC24V
(3)    Electric wire color    Power circuit    phase-R is black
      Phase-S is black   
      Phase-T is black   
      Grounding phase is green/yellow
      Operational circuit    alternate circuit is red
      Direct + side is blue   
      Direct – side is blue   
      Interlocking circuit is orange (non-voltage interface circuit)
(4)    Label inside the panel Chinese character in Japanese (made from propylene, black character on white background)
Paste with white label on the devices inside the panel
(5)    Button    Operation    Green    Automatic    Green
      preparation    (Lighting mode)    initiating    (lighting)
              
      Automatic stop    green    resetting    yellow

Emergency stop                                     red

 

  (6) Power off/on with button

 

  (7) Operational panel Japanese Chinese character/English switch

 

  (8) Three-color signal light location color displaying content

Color and display content upside red lighting in stop

                Fizzle             emergency stop

 

            Middle yellow lighting    Waiting (ending
   Operational preparation)

 

12


Downside green lighting automatic operation

 

10. Technical material provided:

 

  (1) Machine tool checking result table 3 sets, in English + Japanese Chinese character

 

(2)    Operational manual    1 in Chinese + CD1 (covering: maintenance manual, consumption part list, sample of major outsourcing parts and their manual, mechanical assembling drawing and electricity circuit drawing)
   Note:) The sampling material and drawing of the outsourcing parts are all in English or Japanese.

 

11. Preparation items for users:

 

  (1) Transportation on site, primary side power wiring and power, and the cooling water piping to the host machine, compressed air piping and gas sources. Oil mist exhaust pipeline and its construction and cooling devices.

 

  (2) Sibar for acceptance

 

  (3) Consumables

 

  (4) Measurement tools and instrument

 

  (5) oil

 

  (6) Viscometer, densimeter;

 

  (7) Transformer

 

  (8) Other necessary items

 

12. Quality guarantee period and assurance scope

One year after the final acceptance date or B/L date, whichever is earlier. During this period, if the breakdown is resulted from the faulty design and bad making of the seller’s plant, they shall be replaced or repaired for free, but none of the consumptive part and quick-wear part and the breakdown for the buyer’s operate miss or misuse belong to the assurance scope of the seller’s plant and shall be excluded. Whether it is within the quality guarantee period, the damage, the buyer’s mechanical loss for breakdown of this equipment, profit miss and loss not subject to the responsibility of the seller’s plant, the damage, secondary damage, accident subsidiary, damage outside the equipment and compensation for the other businesses whether the seller’s plant has forecasted and they occurs for special cases, are all not subject to the duty scope of the seller’s plant. Besides, the seller’s plant shall not be held responsible for the disaster for force majeure, and secondary compensation like production payment, sales compensation and public hazard for accident and breakdown during delivering equipment.

The damage made during the process of transportation inside the buyer’s country and inside the buyer’ plant shall be taken charge by buyer himself.

 

13


13. Parts provided by the users for free

Enough quantity of Sibar needed in advance acceptance and final acceptance shall be sent to Japan within 2 months before the equipment is on shipment.

Receiver:

641 NOJIRI, NANTO CITY], TOYAMA, JAPAN

KOMATSU NTC LTD

SEMICONDUCTOR DIV.

MR. TAMURA YOSHIAKI

TEL: 0763-22-1368    FAX: 0763-22-1369

After shipment of sibar, the buyer shall fax the shipment document to the seller in time and then send directly the original document to the seller by express for convenience of the seller to handle with the delivery procedure in time. After cutting the sibar, it shall be returned to the buyer together with the host machine.

* If the buyer doesn’t provide sibar, it shall be replaced with glass bar by the seller’s plant.

 

14. Kinetic energy specification

 

  1. Cooling devices shall be arranged by the users.

Cooling water temperature: ****¨

Cooling water flow: above ****l/minute, used in heat exchanger (mortar cooling)

Above ****l/minute, used in the cooling of axis

Water pressure: **** Mpa

 

2.        Compressed air    Dry and clean compressed air with No water needs to be provided    Users take charge of tubing
       Tubing material    SUS (stainless steel pipe) or   
      soft pipe, pipe size: Rc 1/2   
       With compressed air    air pressure: above ****Mpa   
      Air volume: ****NL/minute   
3.        Host machine primary side power 380V±10%, 50Hz    Wiring connected to host
         machine arranged by the
         users
       Host machine is about:   
         165KVA (about 199KVA at
       Power consumption    maximum, 80KVA on average)

 

**** Confidential material omitted and filed separately with the Commission.

 

14


4. Oil mist recovery opening

 

Air exhaust volume    above ****m3/min    Pipeline arranged by the users

Pipe size: outer diameter of the pipeline interface on the side of the host machine is F****mm, taken charge by the plant.

The soft pipe or connection pipe connected with it (inner diameter is F****mm) shall be taken charge by the plant.

 

**** Confidential material omitted and filed separately with the Commission.

 

15


<Appendix III>

 

  1> Slice preciseness and conditions of advance acceptance and final acceptance: (The following cutting preciseness is the guarantee value when adopting the cutting conditions recommended by the plant).

 

Name of the workpiece polycrystalline silicon bar used in solar battery
Quality    Polycrystalline silicon bar
Machined part size    ¨****mm * length ****mm * able to cut 4 pieces at the same time
Thickness    ****um   
TTV9    LOGO ****um   
Warp and twist    LOGO ****um
Roughness    below Ral –****um
Appearance checking    no crack and broken edge
Percent of pass after slicing    ****% (except human factor)   
Steel wire route    double-way route   

 

Workpiece name    Polycrystalline silicon bar used in solar battery
Quality    Polycrystalline silicon bar
Machined part size                        ¨ ****mm * length ****mm * able to cut 1piece at the same time
Thickness    ****um   
TTV9    LOGO ****um
Warp and twist    LOGO ****um   
Roughness   

below Ral –****um

  
Appearance checking   

no crack and no broken edge

  
Percent of pass after slicing ****% (except human factor)      
Steel wire route    double-way route

 

  Note:   1)  

One of the above two routes shall be adopted for per set after primary success and it can just be cut for once. 5 pieces at the two ends shall be cut off in measurement and 5 pieces shall be spot checked from every piece for measurement.

    2)  

The above slice preciseness is when cutting the integral single sibar.

    3)  

The above slice preciseness is in the premise of slice terms, designated main roll, steel wire guide wheel, bobbin, steel wire, silicon carbide and cutting fluids recommended by NTC Company.

    4)  

When measuring the roughness, ****mm from the periphery to inner side shall be cut off.

    5)  

Polycrystalline silicon bar needed in advance acceptance and final acceptance shall be provided by the users for free.

 

**** Confidential material omitted and filed separately with the Commission.

 

16


  6) Thickness astigmatic aberration shall be measured with dial gauge; the roughness shall be measured with surface rough ness measuring instrument or sampling visual measurement.

 

  7) Disposal bobble shall be limited in use to pay off. It cannot be used to winding up. The gap between wires shall be limited within ****mm.

 

  8) When double-way route is adopted, it is permitted to leave stria of above Rmax **** um on the surface being cut.

 

  9) When double-way route is adopted, it is suggested to use non-disposal bobble in paying off and winding up.

2> Slicing terms

 

  1) The following slicing terms can be changed and adjusted based on the actual needs.

(Take an example of one-way route with cutting opening of **** * length ****mm)

 

Slicing liquid    water slicing liquid (NTC SC-1000)
Silicon carbide    # ****
Steel wire speed    ****m/minute
Feeding speed    ****mm/minute (Maximum speed in the slice)
Slicing circulation (route mode)    one-way route
Steel wire diameter    F****mm (limited in one-time use)

 

  2) The following slicing terms can be changed and adjusted based on the actual needs.

(Take the example of double-way route with cutting opening of **** * length **** mm)

 

Slicing liquid    water slicing liquid (NTC SC-1000)
Silicon carbide    # ****

Steel wire speed

  

New wire supply is above ****m/minute, above

  

****m/minute at maximum

Feeding speed    ****mm/minute (Maximum speed in the slice)
Slicing circulation (route mode)    two-way route
Steel wire diameter    F****mm (limited in using for once)

 

**** Confidential material omitted and filed separately with the Commission.

 

17


<Appendix IV> Personnel-related

 

  1) The seller will assign skilled technicians to the site of buyer’s users to conduct the installation and commissioning and final acceptance of equipment. The working dinner and the traffic tools from residence to working site during the working period shall be provided by the buyer for free, but Japanese translator shall be assigned by the seller with all the other charges born by the seller’s personnel.

 

18


<Appendix V> Others

 

  1) After the equipment arrives, only the box holding host machine can be opened by the users and put on its place. The other cases of the products shall be opened by the users after the commissioning personnel of the plant arrives and checked by the both.

 

19

Sales Contract between Shangrao Jinko Solar Import and Export Co., Ltd.

Exhibit 10.56

SALES CONTRACT

Contract No.: 2010-JKWH-0503-0001

This sales contract (“Contract”) is entered into on March 5th, 2010 (“Effective Date”) in Shanghai, PRC.

Between:

 

  (1) Shangrao Jinko Solar Import and Export Co., LTD (Hereinafter referred to as the “Seller”)

 

Address:    Xuri District, Shangrao, Economic Development Zone, Jiangxi Province, China
Post code:    334100
Tel:    +86-793-8469699
Fax:    +86-793-8461152

 

  (2) TRE Tozzi Renewable Energy (Hereinafter referred to as the “Buyer”)

 

Address:    Via Zuccherificio, 10 Mezzano (RA) – Italy
Post code:    48010
Tel:    +39 0544 525011
Fax:    +39 0544 525299

(The Seller or the Buyer hereinafter referred to individually as a “Party” and collectively as the “Parties”)

This Contract is subject to bankability of the Seller’s products, and, upon mutual written agreement, some required minor amendments by the Buyer’s bank are allowed. Jinko is committed to receive a technical inspection from a third party (the Bank technical advisor) and has to bear the relevant costs. This inspection has to be carried out by March 31st, 2010. Once bank has accepted Jinko as Seller and contract amendment is complete, Seller will issue Commercial Invoice and bank guarantee in the amount of ****% of total contract volume. Within 10 working days of documents issuance, ****% of advance payment will be paid by the Buyer.

The Buyer and the Seller agree to conduct the following transactions according to the terms and conditions stipulated below:

 

**** Confidential material omitted and filed separately with the Commission.

 

1


1. Product Description

From the Execution Date hereof to October, 31 2010 (“Contract Period”), the Buyer agrees to buy from the Seller and the Seller agrees to sell the products (“Product”) to the Buyer as set out below. The shipment date and volume for each scheduled order of Products are set out in the schedule for delivery in separate “Delivery Schedule”

 

         

Description of goods

  

Total

     

 

****mm Multi-cell

 

module, 60 cells

 

****mm ****Wp

 

Max voltage ****

 

****%

  

****6mm Multi-cell

 

module, 60 cells

 

****mm ****Wp

 

Max voltage ****

 

****%

  

****mm Multi-cell

 

module, 60 cells

 

****mm ****Wp

 

Max voltage ****

 

****%

  
Monthly Quantity    Watt    ****    ****    ****    ****
Price, May          €****      
              
Price, June          €****      
              
Price, July          €****      
              
Price, August          €****      
              
Price, September          €****      
              
TOTAL Quantity    **** Watt, approx. €****
              
Total : Approx. EURO **** euro only CIF   

The average price per Watt of the total contract shall remain at €**** CIF (Ravenna).

 

**** Confidential material omitted and filed separately with the Commission.

 

2


Optional volume: additional 14 MW at the price of €**** CIF (Italy port) to be confirmed by Buyer no later than May 31, 2010. This volume is to be shipped during the months of July, August and September.

According to the shipment schedule, the Seller shall issue a written Pro-forma invoice to the Buyer by e-mail, facsimile or internationally recognized express courier service (two (2) business days delivery) forty five (45) days prior to the scheduled shipment date (the “Shipment Date”) of each month during the Contract Period. Buyer shall sign and return Proforma invoice within five (5) business days upon receipt. All Proforma Invoices shall be subject to the terms and conditions set forth in this Contract.

Within five (5) business days after its receipt of a Purchase Order from the Buyer, the Seller shall issue a written confirmation and invoice for such Purchase Order to the Buyer (“Confirmation and Invoice”), provided that the quantity of Products ordered conforms to the Delivery Schedule and that the Seller receives the Purchase Order not less than thirty (30) days prior to the proposed Delivery Date. The Confirmation and Invoice shall expressly reference the applicable Purchase Order. Upon subsequent receipt of the Buyer’s payment pursuant to Section 3 and issuance of such Confirmation, the Seller will be bound by the Purchase Order and Confirmation and be obligated to deliver the ordered Products in accordance with the relevant Purchase Order confirmed by the Seller (“Confirmed Purchase Order”). To the extent that there is any conflict among the terms and conditions of this Contract, any Confirmed Purchase Order or any Confirmation thereof, the terms of this Contract shall prevail.

 

2. Product Technical Specifications

 

2.1 Crystalline silicon solar cell Solar module: Type: **** (Dimension: **** mm)

Power tolerance: ****%.

Maximum system voltage: DC **** Volts.

The Seller shall provide a flash report (in an excel form) of every single module evidencing the output power of each module.

 

2.2 See Appendix A of this Contract: Technical Specification.

 

3. Terms of Payment

 

3.1 The following trade term shall apply to the transactions under this Contract: CIF Ravenna. The above trade terms shall be subject to the International Rules for the Interpretation of Trade Terms adopted by the International Chamber of Commerce effective January 1, 2000, including all amendments thereof (“INCOTERMS 2000”).

 

**** Confidential material omitted and filed separately with the Commission.

 

3


3.2 Terms of Payment

****% of the total contract price as set out in the table of Section 1 shall be paid as advance payment by T/T within **** working days from the receipt of Commercial Invoice and Bank guarantee of ****% of the total contract volume.

****% of the balance shall be paid by D/P against Bill of Lading at arrival in Buyer’s port.

 

3.3 The total purchase price for each shipment will be calculated based on the nominal power of the solar modules as recorded on the commercial invoice.

 

3.4 Bank Information

 

Opening Bank:    BANK OF CHINA, SHANGRAO BRANCH
Bank Address:    43 SHENGLI ROAD, SHANGRAO, JIANGXI PROVINCE, CHINA
Swift Code:    BKCHCNBJ550
Beneficiary:    Shangrao jinko solar lmport and Export Co., Ltd.
Beneficiary Address:    Xuri District, Shangrao Economic Development Zone, Jiangxi Province, China

Beneficiary’s Bank Account:

   739173935828094038 (Euro account)

 

4. Title and Risk of Loss/Insurance

 

4.1 Risks of loss or damage, as well as any additional costs due to events occurring after the time of delivery shall pass to the Buyer on delivery in accordance with CIF Incoterms 2000: However, title to the Products per specified delivery shall pass to the Buyer only after payment for those particular Products has been received in full.

 

4.2 The Seller also has to procure marine insurance against the Buyer’s risk of loss of or damage to the Products during the carriage only on minimum insurance coverage in accordance with C.I.F Incoterms 2000.

 

4.3 The Buyer shall at its own cost maintain insurance coverage against all risks which would normally be insured against by a prudent businessman in respect of Products supplied to it commencing from the time when the Products surpass the rail of the carrying vessel and extending until such time as title in the Products passes to the Buyer in accordance with Par.1 above.

 

**** Confidential material omitted and filed separately with the Commission.

 

4


5. Terms of Shipment

 

5.1 Date of shipment: To be determined in a separate Annex

 

5.2 Port of Loading: Shanghai, CHINA

 

5.3 Port of Destination: Ravenna, ITALY

 

5.4 Prior to packing and shipment, modules shall be arranged according to the output power with 1 Watt peak increment. Each pallet and each container shall contain modules with the same output power with 1 Watt peak increment, unless specified and mutually agreed otherwise.

 

5.5 Notice of Shipment

In the case of a shipment by CIF [Ravenna], the Seller shall inform the Buyer the contacts of the forwarding agent, and dispatch date of the relevant vessel by written notice within two (2) working days after the Date of Shipment.

 

6. Packing

 

6.1 The packing of the Product shall be suitable for ocean transportation and provide protection against dampness, humidity, rust, wear and tear, and shock. The Seller shall be liable for any damage to the Product caused by inadequate or improper packing during the shipment, provided, however, that Seller will not be liable for any damage to the Product caused by or attributable to the carrier, or by any other factor not within the Seller’s control; or

 

6.2 The packing of the Product shall be suitable for long distance sea transportation and provide protection against dampness, humidity, rust, wear and tear, shock and rough handling. The Seller shall be liable for any damage to the Product caused by inadequate or improper packing during the shipment.

 

7. Warranty & Claims

Detailed information about Warranty & Claims is included in Appendix B.

 

8. Force Majeure

 

1) Neither Party shall be liable to the other Party for failure of or delay in performance of any obligation under this Contract, directly, or indirectly, owing to acts of God, war, war-like condition, embargoes, riots, strike, lock-out and other events beyond its reasonable control which were not reasonably foreseeable and whose effects cannot be overcome without unreasonable expense and/or loss of time to the affected Party (i.e., the Party that is unable to perform)

 

5


2) If a Force Majeure event occurs, the affected Party shall notify the other Party of the occurrence thereof within seven (7) calendar days of its occurrence, and send a certificate confirming the occurrence of the Force Majeure event issued by the relevant local authorities within fifteen (15) calendar days from the date the event occurred. Thereafter, the Parties shall discuss the best way to resolve the delay or interruption caused by the event. If the conditions of Force Majeure continue to materially impede performance of any material obligation under this Contract for a period of more than three (3) consecutive calendar months, then either Party shall be entitled to terminate this Agreement without consequence upon 30 days’ prior written notice to the other Party.

 

9. Breach Liabilities

 

(i) Based on the requirement of Seller’s commercial strategy, Buyer warrants that it shall not resell Seller’s Product into the countries of USA, Canada and Israel, failing of which Buyer shall be fully responsible for all of loss from the Seller.

 

(ii) Buyer shall warrants that it holds good commercial reputation and is in good financial condition, failing of which Buyer shall be fully responsible and compensate Seller’s loss therein provided that Seller cannot obtain any loan and insurance policy due to Buyer’s such failure.

 

(iii) Buyer shall be responsible for any loss arising from its failure upon timely receipt of the Product of Seller at the destination port.

 

(iv) Unless otherwise provided for under this Contract, if Buyer delays in making payment, Buyer shall pay liquidated damages equal to 0.05% of the Contract amount per day to the Seller. If the delay exceeds (14 ) days, Buyer shall be deemed as unable to pay, and Seller shall have the right to terminate the Contract immediately and require the Buyer to pay liquidated damages equal to 0.3% of the Contract amount without affecting the Seller’s other rights under the Contract.

 

(v) If the Buyer fails to make payment or terminates the Contract unilaterally, the Buyer shall pay liquidated damages equal to 5% of the Contract amount without affecting the Seller’s other rights under the Contract.

 

(vi) Unless otherwise provided for under this Contract, if Seller delays in shipping the goods for more than (14) days, Seller shall pay liquidated damages equal to 0.05% of the Contract amount per day to the Buyer. If the delay exceeds (21) days, Seller shall be deemed as unable to produce and ship the goods, and Buyer shall have the right to terminate the Contract immediately.

 

6


10. Contract Disclosure

Buyer agrees that Seller can disclose the main content of this Contract to the state security commission of the country where Seller is preparing for its listing affairs as required.

 

11. Non-transfer

No right to transfer any right or obligation of this Contract by any Party without express written approval of the other Party.

 

12. Applicable Law

This Contract shall be construed under and governed by the laws of Germany, except as otherwise expressly provided to be governed by INCOTERMS 2000. For any specific matter that is not covered by German law or INCOTERMS 2000, the general international business practices shall apply.

 

13. Arbitration

Any dispute in connection with or arising from the Contract shall be settled through friendly negotiations. If no settlement can be reached, the dispute shall be submitted for arbitration to Chinese-European Arbitration Center in Hamburg, GERMANY, for arbitration in accordance with the UNCITRAL Arbitration Rules in effect at the time of applying for arbitration. The arbitration shall take place in Hamburg, GERMANY, and the arbitral award shall be final and binding upon both parties; and the arbitration fee shall be borne by the losing party.

 

14. Miscellaneous

 

1) Each Party shall ensure that neither it nor its affiliates and each of their directors, senior officers and employees has made or will make any disclosure or announcement in respect of:

 

  (1) this Contract;

 

  (2) the transaction;

 

  (3) the fact that the Parties are in negotiation with each other; and

 

  (4) any communication and information in relation to any of the above (“Confidential Information”).

Each Party shall not disclose the contents of any Confidential Information to any person other than its affiliates or its or its affiliates senior officers, directors, employees and professional advisors involved in the negotiation of the transaction and/or evaluation on a need-to-know basis and only after they have been notified of this Section of this Contract and been required to comply with it.

 

7


Provided, however that if disclosure of any Confidential Information is agreed to by the Parties in writing in advance or is required to be disclosed pursuant to any applicable law or by any order of a court or other governmental body with jurisdiction, including without limitation, the disclosure requirements of any future IPO conducted by the Seller, such disclosure will not be deemed a breach of 1) of this Section.

 

2) This Contract, together with its all Appendixes constitutes the whole and has the same effectiveness.

 

3) This Contract is drafted in Chinese and English. In case of any discrepancy between the two versions, the English version shall prevail. This contract is executed in duplicate. Each party holds one version with the same effectiveness.

 

4) The Contract shall take effect upon the seal and signature of the appointed representatives of the Parties with seals on the perforation.

 

8


The Contract has been duly executed by the appointed representatives of the Parties on March 5, 2010.

Appendices:

Appendix A: Technical Specification

Appendix B: Limited Warranty for PV Modules

/s/Gulnara Abdullina

On Behalf of

Jinko Solar Co., Ltd

Appointed Representative

Gulnara Abdullina

/s/Franco Tozzi

On behalf of

TRE Tozzi Renewable Energy

Appointed Representative

Franco Tozzi, President

 

9


Appendix A to Contract No: 2010-JKWH-0503-0001

****     ****W     Poly-crystalline Solar Module (**** inch Cell)

SPECIFICATIONS    LOGO   
www.jinkosolar.com         
Model Type    ****    ****    ****
Maximum Power (Pmax)    ****Wp    ****Wp    ****Wp
Cell Type    Poly-crystalline ****mm (**** inch)
No. of Cells    **** (****)
Dimensions    ****mm (****inch)
Weight    ****kg (****lbs.)
Packing Configuration   

**** modules/box, **** boxes per pallet, **** pcs/****

pallets per **** foot container

Maximum Power Voltage (Vmp)    ****V    ****V    ****V
Maximum Power Current (Imp)    ****A    ****A    ****A
Open-Circuit Voltage (Voc)    ****V    ****V    ****V
Short-Circuit Current (Isc)    ****A    ****A    ****A
No. of Diode    ****
Maximum System Voltage    ****V (TUV,VDE) DC
Maximum Series Fuse Rating    ****A
Power Tolerance    ****%
Temperature Coefficients of Pmax    ****ºC
Temperature Coefficients of Voc    ****ºC
Temperature Coefficients of Isc    ****ºC
Nominal Operating Cell Temperature (NOCT)    ****ºC

STC: Irradiance 1000W/m², Module Temperature 25ºC, AM=1.5

 

**** Confidential material omitted and filed separately with the Commission.


Jinko Solar Warranty Terms

Photovoltaic Module Limited Warranty

 

1. Limited Product Warranty – Five Year Repair or Replacement

Jinko Solar Co., Ltd. (“Jinko”) warrants that its photovoltaic modules together with the DC connector cable assemblies are free from defects, if any, in materials and workmanship under normal application, use, installation and service conditions for a period of pending sixty (60) months from the shipment date of Jinko modules (“Modules”) to the original end-customer (“Customer”). If Modules become malfunction or inoperative due to defect in material or workmanship during such pending sixty (60) months period set forth above, Jinko will, at its own option, either repair or replace the Modules in problem. The repair or replacement or remedy shall be the sole and exclusive remedy provided under this Limited Warranty.

 

2. Limited Peak Power Warranty and Limited Remedy

 

  A. **** years

Provided that, within a period of **** years from the shipment date of the Modules to the Customer, any Module exhibits a power output less than 90% of the minimum peak power at Standard Test Conditions, and the reason for such loss in power is due to Modules’ defects in material or workmanship attributed to Jinko , who will, at its sole option and discretion, either [1] make up such loss in power by providing to Customer additional Modules; or [2] repair or replace the defective Modules including free shipping to the place supplied by Jinko.

 

  B. 25 years

Provided that, within a period of twenty-five (25) years from shipment date of the Modules to the Customer, any Module exhibits a power output less than 80% of the minimum peak power at Standard Test Conditions, and the reason for such loss in power is due to Modules’ defects in material or workmanship attributed to Jinko, who will, at its sole option and discretion, either [1] make up such loss in power by providing to the end-user Customer additional Modules; or [2] repair or replace the defective Modules including free shipping to the place applied by Jinko.

The remedies set forth in Section 2 are the sole and exclusive remedies provided under the limited minimum Peak Power Warranty.

 

**** Confidential material omitted and filed separately with the Commission.


3. Exclusions and Limitations;

 

  A. Warranty claims, in any event, shall be filed in writing to Jinko or its authorized distributors within the applicable warranting period

 

  B. These Limited Warranties will not be applied to normal wear and tear, to the natural effects of exposure to weather conditions over time, or to the Modules which under Jinko’s sole judgment have been subjected to:

 

   

Misuse, abuse, neglect, vandalism or accident;

 

   

Alteration, improper installation or application

 

   

Repair or modifications that do not strictly follow the manufacturer’s instructions;

 

   

Non-observance of Jinko’s maintenance instructions;

 

   

Power failure, electrical spikes or surges, lighting, flood, fire, accidental breakage or otherevents outside the control of Jinko.

 

  C. These Limited Warranties only cover the transportation costs for shipment of any repaired or replaced Modules to the place applied by Jinko. Any costs for returning the Modules to Jinko or its authorized agents and authorized distributors, or costs associated with installation, removal or reinstallation of the Modules, shall be borne by the end user Customers.

 

  D. Warranty claims will not be honored if the type or serial number of Jinko Modules have been altered, removed or made illegible without written authorization from Jinko.

 

4. Transferability

This warranty is extended to the original end-user purchaser, and is also transferable to any subsequent owner of the location or holder of the product when Module(s) remain at their original installed location upon satisfactory proof of succession or assignment.

 

5. Obtaining Warranty Performance

In order to obtain warranty service under the Jinko Limited Warranty, the end user Customer should promptly notify Jinko regional customer service center. Together with the notification, the complete serial number printed on the module label and the shipment date of its Modules shall be marked as well. If the Modules will be returned for inspection, repair or replacement by Jinko, Jinko will give the Customer a Return Merchandise Authorization (RMA). However, Jinko will not accept a return of any Modules without a RMA.


6. Disputes

No action, regardless of form, arising out of or in any way connected with this Limited Warranty, may be brought by the end user Customer more than one (1) year from the date when causes of action occurred.

 

7. Various

The repair or replacement of the Modules or the supply of additional Modules does not lead to a new commencement of warranty terms, nor shall the original terms of this Limited Warranty be extended. Any replaced Modules shall become the property of Jinko. Jinko shall at its own options to deliver another type of PV Modules (different in size, color, shape, or power), either a new brand or the original one, in case of that Jinko has discontinued producing the module in question at the time of the claim.

 

8. Force Majeure

Jinko shall not be in any way be responsible or liable to the end user Customer or any third-party arising out of any non-performance or delay in performance of any terms and conditions of sale, including this Limited Warranty, due to fire, flood, blizzard, hurricane, thunder, acts of God, changes of public policies, terrorism, war, riots, strikes, unavailability of suitable and sufficient labor or materials and other events which are out of control of Jinko.

NOTE: “Peak Power” is the power in watt peak that a PV-module generates in its maximum power point. Jinko Solar measurements are as follows (a) light spectrum of AM 1.5, (b) an irradiation of 1,000W per m2 and (c) a cell temperature of 25 degree Centigrade. The measurements are carried out in accordance with IEC61215 as tested at the junction box terminals per the calibration and testing standards of Jinko valid at the date of manufacture of the PV-Modules. Jinko’s calibration standards shall be in compliance with the standards applied by international institutions accredited for this purpose.

Jinko Solar

2009.12.31

OEM Processing Agreement among One Sun (Holdings) Co., Ltd.

Exhibit 10.57

OEM PROCESSING AGREEMENT

Contract No.:JKMSD2010-O-001

This OEM PROCESSING AGREEMENT (this “Agreement”), is entered into as of [Feb. 8th, 2010] (the “Effective Date”):

Party A:        [ONE SUN (HOLDINGS CO., LTD.]

One is organized according to the registration local laws and legal existent, the address is (3905 Two Exchange Square, 8 Connaught Place, Central, Hong Kong),

And: Senergy Corporation (Shanghai) Co., Ltd.

Party B:        [JINKO SOLAR CO., LTD.],

which is organized according to the registration local laws and legal existent, the address is (No. 1 Jinko Road, Shangrao Economic Development Zone Jiangxi Province, China) (Called PARTY A and PARTY B each as “One PARTY” separately and both as “Two Parties”).

Preface

PARTY B is engaged in the business of designing, manufacturing and selling, and has obtained TUV Certificates for its products. Whereas, PARTY A intentionally consigns PARTY B for the commission, and PARTY B agrees with it. According to the agreement terms and conditions, OEM Processing should be followed as defined in article 2.1; and, ONE SUN (HOLDINGS) CO., LTD. may transfer partially its rights to Senergy Corporation (Shanghai) Co., Ltd for the purpose of handling transactions with the other Party in P.R. China).

Therefore, the two parties agree to accord to the content in the agreement as below, which is the legal agreement as follows:

Article I Definitions

Definitions

“Affiliates” shall mean a person (including both natural person and legal person, incorporated or not) that directly or indirectly, is controlled by, controlling, or is under common control with a PARTY.

“Agreement” shall mean this OEM Processing Agreement and all attachments in the parts. “OEM Product” shall mean solar photovoltaic module, with its specifications see the attachment A.

“OEM Brand” shall mean the brand, trademark, logo, symbol, label or any other marks under which the OEM Product shall be manufactured and delivered.

“TÜV Certification” shall mean product safety certification issued by Technischer Überwachungs-Verein (Technical Inspection Association) based in Germany.

Authorization

Party A is entitled to sell the OEM Product all around the world except Israel with a non-exclusive, non-assignable and non-transferable right authorized by Party B.

 

1


Use Range

The co-certifications are only applicable for the OEM Product by Party B. If Party A uses the co-certifications by other products, Party B is entitled to ask the TUV organization to cancel Party A’s co-certifications.

Article II OEM PROCESSING

 

2.1 OEM Processing.

Part A consigns the commission to the OEM product to PARTY B, and PARTY B agrees to manufacture the OEM Product upon the terms and conditions of this Agreement (the “OEM Processing”).

 

2.2 OEM Brand.

PARTY A and PARTY B both agree that the OEM Product shall be manufactured under the OEM Brand. Party A hereby grants to PARTY B a non-exclusive, non-transfer, royalty-free license to use the OEM Brand, and Party A shall promptly provide samples, specifications and/or instructions for the use of the OEM Brand to PARTY B.

 

2.3 Processing Standards.

PARTY B shall manufacture the OEM Product in accordance with its standard manufacturing specifications unless otherwise requested by Party A. In the event Party A requests special manufacturing specifications for the OEM Product, Party A shall provide PARTY B with a written request for special manufacturing specifications, including a bill of materials (“BOM”) as well as quality control standards within fifteen (15) days from the effective Date. The special manufacturing specifications shall be subject to PARTY B’s acceptance and shall come into effect only upon written confirmation by PARTY B.

 

2.4 OEM Product Certification.

Party A desires to obtain co-license of PARTY B’s TÜV Certificate for the OEM Product and shall make the appropriate applications at its own expense. PARTY B shall assist Party A in the applications by providing OEM Product samples or other documentation at Party A’s written request. Party A shall inform PARTY B, in writing, of all developments and occurrences in the application process and the result thereof in a timely manner. PARTY B shall not be required to identify the OEM Product as TÜV certified until PARTY B is in receipt of written proof of such co-license for the relevant OEM Product.

The co-license of TÜV Certification shall be effective during the Term of this Agreement and shall terminate upon termination of this Agreement. PARTY B has the sole and exclusive power and authorization to monitor and ensure compliance with relevant rules of [TÜV Certification], and may suspend or terminate OEM Product’s [TÜV Certification co-license] if Party A fails to remediate any breach of relevant rules upon PARTY B’s request. If PARTY B terminates OEM Product’s TÜV Certification co-license due to Party A’s breach, Party A shall reimburse certification assistance fee to PARTY B in addition to damages. If Party A terminates OEM Product’s TÜV Certification co-license due to Party B’s breach, PARTY B shall reimburse certification assistance fee to Party A in addition to damages.

 

2


As soon as PARTY B obtains additional certified solar panels (NEW PRODUCTS), Party A will be entitled to apply for such OEM certifications and promote the NEW OEM PRODUCT in such related territories.

The total cost of co-certifications is borne by Party A.

 

2.5 Product

PARTY B will prepare the OEM Products based on the Purchase Order from Party A, to be agreed by both PARTIES in written. PARTY B shall make its best efforts to supply the OEM Product according to Party A’s request. The OEM Products shall be selected among the following:

****-cell Module made with ****×**** mm Multi-crystalline Solar cells with rated power between **** Wp and **** Wp with the following data sheet:

 

   

Power tolerance: ****%

 

   

Maximum system voltage: DC **** Voltage

****-cell Module made with ****×****mm Mono-crystalline Solar cells with rated power between **** Wp and **** Wp with the following data sheet:

 

   

Power tolerance: ****%

 

   

Maximum system voltage: DC **** Voltage.

****-cell Module made with ****×****mm Mono-crystalline Solar cells with rated power between **** Wp and **** Wp with the following data sheet:

 

   

Power tolerance: ****%

 

   

Maximum system voltage: DC **** or **** Voltage

Meanwhile, PARTY B shall give the possibility to Party A to extend its OEM Products to the full available line of certified Solar Panels Products.

 

2.6 Raw Materials.

PARTY B is solely responsible for the sourcing of all raw materials and any other supplies for the manufacturing of the OEM Product. Each BOM for the OEM Product shall be made and provided solely by PARTY B in accordance with the column “Primary BOM” of the table adjacent to this paragraph. No amendment to such BOM shall be made unless agreed upon by both Parties and permitted by relevant certification authorities if applicable. In the event Party A requests special manufacturing specifications and BOM for the OEM Product and a particular material is, or becomes unavailable, PARTY B may, upon written confirmation from Party A, source and use a reasonable substitute material, firstly as indicated in the “Secondary BOM” columns of the table adjacent to this paragraph. The contents of a BOM shall be treated as Confidential Information in accordance with this agreement, and may not be disclosed by Party A in any event, except required by court order or by stock exchange authorities.

 

**** Confidential material omitted and filed separately with the Commission.

 

3


Material name

  

Primary BOM

  

Secondary BOM

Solar cell    ****    ****    ****    ****
Glass    ****    ****      
Backsheet    ****    ****    ****   
EVA    ****    ****      
Frame    ****         
Silicon gel    ****         
Junction Box    ****         
Junction Box Connectors    ****         
Others    ****         

If Party A needs to have any new material application to TUV in the co-license, Party A should inform Party B in 3 working days advanced by written form and once Party B confirmed and passed the TUV certification, it could be listed in appendix of this agreement.

ARTICLE III QUANTITY, UNIT PRICE AND ORDER

 

3.1 Quantity

Party A warrants that, Party A placed orders should be as set out below during the term of this agreement, with an aggregate amount of no less than 10 MW in 2010. If Party A fails meeting such quantity requirement, PARTY B may terminate this agreement immediately.

 

Item

 

Q1

  Q2   Q3   Q4   2011   2012

JKM-****mono

  €****FOB Shanghai   TBD   TBD   TBD   TBD   TBD

JKM-****W mono

  €****FOB Shanghai   TBD   TBD   TBD   TBD   TBD

JKM-****multi

  €****FOB Shanghai   TBD   TBD   TBD   TBD   TBD

Minimum Qty

  ****MW   ****MW   ****MW   ****MW   ****MW   ****MW

Optional

  ****MW   ****MW   ****MW   ****MW    

Total

  ****MW   ****MW   ****MW   ****MW    

Above price is FOB Shanghai basement, in the term of CIF, the cost for transportation and insurance is Euro ****/W.

 

3.2 Unit Price

The unit price of the OEM Product shall be negotiated quarterly.

In addition:

 

  1) Both parties agree that if the Product’s market price has fluctuated by +/-3% between the first day of the quarter and the actual day, both parties could renegotiate the quarterly Product’s selling price;

 

**** Confidential material omitted and filed separately with the Commission.

 

4


  2) If, based on the currency exchange rate convertor www.xe.com, the exchange rate Euro to Chinese Yuan varies by more or less +/-3% based on the exchange rate at the contract signature date for the first quarter price, or the exchange rate at the first day of each quarter, and for more than 5 consecutive days, both Parties agree to renegotiate the price during the quarter.

 

3.3 Order

All orders for the OEM Products shall be in writing, specifying the quantity of the OEM Product and the expected delivery date, and forwarded to PARTY B at least [15] days prior to the requested delivery date. All orders shall be subject to acceptance by PARTY B and shall be subject exclusively to this agreement. This agreement shall not be modified or supplemented by any communication, order, or other document from Party A or PARTY B unless such communication is in writing, identified as an amendment to this agreement, and subsequently accepted in writing by the other PARTY.

All the order quantity should be according to the forecast quarterly when both Parties negotiate the price for coming quarter. If there is additional quantity beyond the forecast, Party A should inform Party B in 30 days advance and it should be confirmed by Party B in written form.

ARTICLE IV DELIVERY, INSPECTION AND TITLE

 

4.1 Delivery

PARTY B shall notify Party A of each order to be delivered in advance (the “Delivery Notice”) and deliver the OEM Product to the address designated by Party A for delivery of the OEM Product, subject to Article 5.1. Party A shall make all necessary arrangements to facilitate delivery of the OEM Product. In the event that PARTY B is unable to deliver the OEM Product by the confirmed delivery date, PARTY B shall inform Party A of such delay within 10 days prior to the expected delivery date and the Parties shall use their reasonable efforts to reschedule the delivery.

Within a maximum period of 45 days after delivery, Party A shall check the type and quantity of the OEM Product delivered and sign the confirmation letter of receipt in the form attached as attachment A (“Delivery Confirmation Letter”), the date of which shall be the “Delivery Date”. After execution of the Delivery Confirmation Letter, PARTY B shall be deemed to have discharged all obligations under the order so delivered except for warranties contained in Article 8.3.

 

4.2 Inspection

PARTY B shall enable Party A to inspect the production of the OEM Product to Party A’s designated employees and allow access and inspection to the production workshops of PARTY B to be used for the production of the OEM Product. Party A shall have access to quality data of raw material, ingots, wafers cells and solar panels related to the OEM Product. PARTY B shall maintain high quality standards of manufacturing process and high quality of products to be produced for the OEM, and shall perform 100% testing of raw materials, solar cells and solar modules at the end of production of each item, and provide flash report. Upon execution of the Delivery Confirmation Letter, Party A shall inspect the delivered OEM Product immediately for any physical or apparent damage. Party A shall notify PARTY B in writing of any physical or apparent damage or possible technical or operational damaged to the OEM Product that renders the OEM Product non-functional within 5 business days of the Delivery Date; otherwise, Party A shall be deemed to have inspected and found the delivered OEM Product free of any damage.

 

5


4.3 Title and Risk of Loss.

Any risk of loss, of the delivered OEM Product shall pass from PARTY B to Party A upon execution of the Delivery Confirmation Letter. However, the title of such Product shall transfer to Party A after the full payment has been paid.

Article V Payment

 

5.1 Terms of Payment

 

(1) **** % of each order shall be paid as advance payment by T/T within ****working days from each Purchase Order Date, and the balance shall be paid by D/P at sight.

 

5.2 [ACCOUNT DETAILS] :

 

Bank Name :   BANK OF CHINA, SHANGRAO BRANCH
Address :   43 SHENGLI ROAD, SHANGRAO, JIANGXI PROVINCE, CHINA
SWIFT :   BKCHCNBJ550
BENEFICIARY’s Name :   JINKO SOLAR CO., LTD.
BENEFICIARY’s Address :   “NO.1 Jinko Road, Shangrao Economic Development Zone, Jiangxi Province, CHINA”
BENEFICIARY’s A/C:   739153091438094038

Article VI TERM AND TERMINATION

 

6.1 Term.

The term of this Agreement (the “Term”) shall be 3 years from the Effective Date. [This Agreement shall automatically renew for successive 1 year periods unless either PARTY provides written notice to the other PARTY sixty (60) days prior to the expiration of this Agreement of its intent not to renew this Agreement.]

 

6.2 Termination.

Either PARTY shall have the right to terminate this Agreement if the other PARTY breaches or fails to comply with any material terms hereof and fails to correct such breach or lack of compliance within thirty (30) days after receipt of written notice of such breach or failure from the first PARTY.

Either PARTY may immediately terminate this Agreement by giving written notice of such termination to the other PARTY on the occurrence of the following events:

 

  a. The other PARTY making any voluntary petition in bankruptcy or any petition for similar relief;

 

  b. The making of any involuntary petition in bankruptcy or any petition for similar relief against the other PARTY;

 

**** Confidential material omitted and filed separately with the Commission.

 

6


  c. The appointment of a receiver or liquidator for the other PARTY’s property;

 

  d. The making of an assignment by the other PARTY for the benefit of its creditors or the acknowledgment by the other PARTY that is unable to meet its obligations on the maturity thereof; or

 

  e. An execution of a judgment or a writ for seizure of property against the property of the other PARTY shall have been made and remain unsatisfied for more than thirty (30) days.

Within 30 days upon written notification by one PARTY to the OTHER PARTY for above reason.

 

6.3 Obligations after Termination.

Upon termination of the Agreement:

 

  a. The obligations set out in Articles 8, 9 and 10 shall survive; and

 

  b. The obligation of Party A to pay in full for any outstanding payment due shall survive.

 

  c. The obligations of PARTY B to provide the OEM Product ordered and to be delivered shall survive.

Article VII EXCLUSIVITY

 

7.1 Exclusivity.

During the Term of this Agreement, Party A agrees to engage PARTY B for the manufacture and processing of the OEM Product indicated in Term 2.5 on an exclusive basis provided that PARTY B can deliver the OEM Product upon Party A’s Purchase Orders.

Throughout the duration of this Agreement and within a period of 24 months after the termination of this Agreement, Party B shall act in good faith towards Party A. Unless Party A’s prior and written agreement is obtained, Party B shall not initiate solicitation contact in any way to the customers of PARTY A (“the Customers”) and all the sales made to the Customers shall be conducted through Party B. However, the Principal may pay visit to the Customers for the purpose of, including but without limitation, maintaining a good relationship with the end-user. If Party A fails to fulfill its obligations under this section, Party A shall inform Party B in written form and give Party B 3 working days to make the internal investigation. Once it is confirmed that the complaint is true. Party B should take action to explain to the Customers back to Party A. In case the action does not work, PARTY B shall pay a penalty equal to 20% of the Sales contract total amount signed between Party B and the Customer(s) of PARTY A. However, if PARTY A agrees in written that PARTY B enters into a contract directly with PARTY A’s customers, PARTY A shall be entitled to receive a commission equals to **** euro cent (EUROS ****) per each watt sold by PARTY B to PARTY A’s customers. Such Commission shall be paid by T/T within 15 days upon the payment in full by PARTY A’s customer to PARTY B.

Party A should offer the existing customer list to Party B as soon as the agreement is signed and sealed.

 

**** Confidential material omitted and filed separately with the Commission.

 

7


Article VIII REPRESENTATIONS AND WARRANTIES

 

8.1 Representations

Each PARTY represents and warrants to the other PARTY B’s of the Effective Date of this Agreement that:

 

  a. such PARTY is duly incorporated and validly existing under the laws of its jurisdiction of incorporation;

 

  b. such PARTY has full legal right, power and authority to carry on its present business, to own its properties and assets, to execute and deliver this agreement and to perform its obligations hereunder;

 

  c. such PARTY has taken all corporate and legal action required to be taken by such PARTY to authorize the execution and delivery of this agreement and the performance of its obligations hereunder;

 

  d. this agreement constitutes the legal, valid and binding obligation of such PARTY, enforceable against such PARTY in accordance with its terms; and

 

  e. the execution, delivery and performance of this Agreement (i) will not violate any applicable law, (ii) will not conflict with the organizational documents of such PARTY B and (iii) will not conflict with or result in the breach of any provision of any agreement or instrument to which such PARTY is a PARTY of by which its or any of its properties or assets is bound.

 

8.2 Party A Warranties.

Party A warrants that:

 

  a. it has the right, license or authority to grant PARTY B the license to use the OEM Brand on the OEM Product; and

 

  b. it shall indemnify, defend and hold harmless of PARTY B and its affiliates, officers, directors, agents and employees, from and against any claim based upon any acts or omissions of Party A, its employees or agents including, without limitation, any infringement of patent, trademark, copyright or other intellectual property right of a third PARTY by the OEM Brand.

 

8.3 PARTY B Warranties

PARTY B provides the following warranties only to the OEM Product that uses BOM of PARTY B as approved by relevant certification and does not provide any warranty to the OEM Product that uses BOM of Party A:

 

  a. Each delivery of the OEM Product shall have a physical damage rate of less than 1% at the time of delivery. Nevertheless, PARTY B shall be responsible for the replacement or repair of such defective Products. However, PARTY B shall not be responsible for any physical damage caused by improper transportation and installation by Party A. Upon timely notice of any excess of the physical damage rate pursuant to Article 4.2, Party A shall return the excess damaged OEM Products to PARTY B and PARTY B shall replace them with new OEM Products within a reasonable time.

 

8


  b. The OEM Product will maintain 90% of the minimal rated power output set forth in Exhibit A within ten (10) years of the Delivery Date, and will maintain 80% of the minimal rated power output within twenty-five (25) years of the Delivery Date. PARTY B’s obligations under this limited warranty are limited to replacing or repairing any of the OEM Product which shall within the warranty periods be returned to PARTY B, transportation charges prepaid, and which are, after examination, disclosed to be defective by failing to meet the warranted power output rate, such defect not being due to misuse, neglect, improper installation, repair, alteration or accident. If an OEM Product is determined to be out of warranty or not defective, PARTY B will advise Party A and offer to repair the OEM Product at standard out-of-warranty rates.

 

  c. PARTY B shall deliver the OEM PRODUCT with the Primary BOM indicated in this agreement. In case of shortage of components or for some specific reason, PARTY B may modify the BOM only after written confirmation from Party A. In case the BOM differs from the Primary BOM indicated in this agreement and PARTY A has not been notified in written, PARTY B shall be deemed responsible for consequential loss, damage and prejudice caused to PARTY A and shall compensate PARTY A for such loss.

 

  d. PARTY B shall indemnify, defend and hold harmless Party A and its affiliates, officers, directors, agents and employees, from and against any claim based upon any acts or omissions of PARTY B, its employees or agents including, without limitation, any infringement of patent, trademark, copyright or other intellectual property right of a third PARTY by the OEM Brand.

 

8.4 Limitations and Exclusions.

The warranties provided in article 8.3 are personal to Party A and are limited warranties. They are only warranties made by party B to Party A. PARTY B makes no other warranty, express or implied and all warranties of merchant ability and fitness for any particular purpose are expressly excluded.

ARTICLE IX BREACH LIABILITY

Party A shall be responsible for any loss arising from its failure upon timely receipt of the OEM Product by Party B at Shanghai sea port.

Party B shall be responsible for any loss arising from its failure upon timely receipt of the OEM Product by Party A at Shanghai sea port.

Unless otherwise provided for under this Agreement, provided that Party A delays in making payment, and if the delay exceeds 30 days, Party A shall be deemed as unable to pay, and Party B shall have the right to terminate the Agreement immediately.

Party A warrants that it fully holds the Intellectual Property right of any OEM Brand provided to Party B.

 

9


Article X CONFIDENTIALITY

 

10.1 Definition.

Since January 18th, 2010, and during the Term of this agreement, each PARTY may disclose (the “Disclosing PARTY”) to the other PARTY (the “Receiving PARTY”) information in connection with this Agreement and performance by the Parties of this Agreement, including without limitation technical data, trade secrets, plans for products or services, customer or supplier lists, marketing plans, strategies and tactics, software, financial documents or data, inventions, processes (business, technical or other), technology, designs, or any other information, in whatever form, which is maintained by the Disclosing PARTY Bs confidential and designated in writing as confidential, proprietary or marked with words of the like at the time of or within a reasonable time from disclosure to the Receiving PARTY (“Confidential Information”).

 

10.2 Exclusions and Exceptions.

 

  a. Notwithstanding the foregoing Article 9.1, the Receiving PARTY will have no obligation under this agreement with respect to any Confidential Information disclosed to it which: (i) the receiving PARTY can demonstrate was already rightfully known to it at the time of its receipt hereunder; (ii) is or becomes generally available to the public other than by means of the Receiving PARTY’s breach of its obligations under this agreement; (iii) is independently obtained from a third PARTY whose disclosure violated no duty of confidentiality; or (iv) is independently developed by or on behalf of the Receiving PARTY without use of or reliance on any Confidential Information furnished to it under this agreement, and such independent development can be reasonably evidenced by the Receiving PARTY. (¨) is required by court order or by stock exchange authorities.

 

  b. the Receiving PARTY may disclose Confidential Information pursuant to applicable law or regulation or by operation of law, provided that the Receiving PARTY may disclose only such information as is legally required, and provided further that the Receiving PARTY will provide a reasonable written notice to the Disclosing PARTY of such requirement and a reasonable opportunity for the Disclosing PARTY to seek protective measures.

 

10.3 Confidentiality Obligations.

 

  a. Party A shall use PARTY B’s Confidential Information solely to fulfill its obligations under this Agreement, and, except as otherwise provided herein, all PARTY B’s Confidential Information will remain at all times the sole and exclusive property of PARTY B.

 

  b. The receiving PARTY shall hold the Confidential Information in strict confidence and shall not make any disclosure of the Confidential Information (including methods or concepts utilized in the Confidential Information) to anyone without the express written consent of the disclosing PARTY, except to the Receiving PARTY’s affiliates, employees or agents to whom disclosure is necessary to the performance of this Agreement. Each such affiliate, employee, or agent must be informed that such person is required to maintain the confidentiality of the Confidential Information and is restricted to use the Confidential Information only for the performance of this agreement.

 

  c. Each PARTY shall use the same degree of care as it uses to maintain the confidentiality of its own confidential information, which in no event shall be less than reasonable care.

 

10


ARTICLE XI OTHERS

 

11.1 Governing Law.

This agreement shall be governed by and construed in accordance with Law of the Hong Kong. Any controversy, dispute or claim whatsoever arising out of or in connection with this Agreement or the breach thereof shall be referred to and finally resolved by arbitration in Hong Kong under the rules of Hong Kong International Arbitration Center (HKIAC), which rules are deemed to be incorporated by reference into this clause.

 

11.2 Assignment.

Neither PARTY may assign or transfer all or any part of its rights or obligations under this agreement without the prior consent of the other PARTY.

 

11.3 Notice.

All notices to be given pursuant to this agreement shall be in writing and may be given either (i) in person (including by reputable courier service or certified mail); or (ii) by facsimile or email at the following addresses:

In the case of PARTY B, to:

Company Name JINKO SOLAR CO., LTD

Address: No.1 Jinko Road, Shangrao Economic Development Zone Jiangxi Province, China

Fax Number: 021-61633885

E-mail: lj@jinkosolar.com

Consignee: Melissa lee

In the case of Party A, to:

Company Name ONE SUN (HOLDINGS) COMPANY LIMITED

Address: 1388 North Shaanxi Road, Silver Centre, Room 707, 200060 Shanghai, P.R. China

Fax Number: +86-21-6149-8185

E-mail: info@one-sun.com

Consignee: Ms Jessica Xu

In the case of Party A, to:

Company Name Senergy Corporation (Shanghai) Co., Ltd

Address: 1388 North Shaanxi Road, Silver Centre, Room 707, 200060 Shanghai, P.R. China

Fax Number: +86-21-6149-8185

E-mail: info@one-sun.com

Consignee: Ms. Jessica Xu

or to any other address or fax number/email address as a PARTY may designate for itself from time to time by notice given in accordance with this Article 10.4.

 

11


11.4 Entire Agreement.

This agreement constitutes the entire agreement between the Parties concerning the subject matter hereof and supersedes all prior agreements and understandings, whether verbal, written or otherwise between the Parties concerning the subject matter hereof.

 

11.5 Severability of Provisions.

If any provision of this Agreement is held to be invalid, illegal or incapable of being enforced by any law or public policy, all other terms and provisions of this Agreement shall nevertheless remain in full force and effect. The Parties shall use their respective best efforts to agree upon the minimum changes necessary so as most closely to achieve the initial intention of the Parties whilst ensuring that the Agreement shall comply with such law or public policy.

 

11.6 No Waiver.

No failure to exercise or delay in exercising any right or remedy by a PARTY under this Agreement or as may be available by law (i) shall operate as a waiver thereof by such PARTY, or (ii) shall preclude such PARTY from exercising any right or remedy under this agreement in any future similar circumstances.

 

11.7 Force Majeure.

Neither PARTY shall be liable for any failure to perform or delay in performance of its obligations hereunder (except for the payment of money) caused by circumstances beyond its reasonable control or which make performance commercially impractical, including, but not limited to, fire, storm, flood, earthquake, explosion, accident, acts of a public enemy or rebellion, insurrection, riot, civil commotion, strikes or other labor disputes (including those affecting third parties), sabotage, epidemic, quarantine or any agency thereof, governmental or judicial action and any other such external circumstances. In the event of such delay, delivery dates shall be appropriately adjusted.

 

11.8 Amendment.

No amendment of the terms of this agreement shall be binding unless:

 

  a. prior written consent has been obtained from the other PARTY; and

 

  b. is made in writing dated subsequent to the Effective Date of this agreement and duly executed by both Parties to this agreement.

 

11.9 Language.

This agreement is executed in both English and Chinese. In the case that there is any discrepancy between the two versions, the English version shall prevail.

 

12


In witness whereof, each PARTY has caused this agreement to be executed by its duly authorized representatives as of the date and year first above written.

 

[COMPANY NAME]   [COMPANY NAME]
ONE SUN (HOLDINGS) CO., LTD   JINKO SOLAR CO., LTD
By: /s/ ONE SUN (HOLDINGS) CO., LTD   By: /s/ JINKO SOLAR CO., LTD
Name: ONE SUN (HOLDINGS) CO., LTD   Name: JINKO SOLAR CO., LTD
Title:   Title:

 

13


Attachment A Form of Delivery Confirmation Letter

To:             

Reference is hereby made to the OEM Processing Agreement dated as of [DATE] between [COMPANY NAME]              (“PARTY B”) and [COMPANY NAME] (the “PARTY A”) and the order for [QUANTITY] of OEM Product (as defined in the OEM Processing Agreement) dated [DATE].

Party A hereby confirms that:

 

1. on [DATE], PARTY B delivered [QUANTITY] of OEM Product to Party A at the address nominated by Party A; and

 

2. the delivered OEM Product conforms in type and quantity to the order dated [DATE].

Signed on the [     date        ]

By Name Title:

 

14


[ONE SUN (HOLDING CO.,LTD]

Sign & Seal

And

[DATE]

[JINKO SOLAR CO.,LTD]

Sign & Seal

[DATE]

 

15


Appendix B - Inspection Standard

 

Category

  

Detection
Category

  

Judgment Standard

  

Inspection Equipment

Raw Material    Silicon material used for production of monocrystalline and multicrystalline ingots   

1. Polycrystalline silicon from Wacker, Hemlock, OCI, REC, Tokuyama, MEMC, M. Setek, KCC, Mitsubishi, solar grade prime product: allowed

 

2. Semiconductor-grade tops and tails, pot scrap, clean wafers with P-type>**** and N-type>**** allowed

 

3. Solar grade tops and tails, pot scrap from Jinko own production with P-type>**** allowed

 

4. Chinese polycrystalline silicon not allowed

 

5. Polycrystalline from manufacturers other than named above is not allowed

 

6. UMG polycrystalline silicon is not allowed

 

7. Other materials not allowed

  

Visual Inspection and Standard testing equipments

 

After giving written notice to Party B and be confirmed by Party B, Party A shall be allowed to send people to Party B’s workshops for on site inspection.

Solar grade ingots    Monocrystalline and Multicrystalline ingots used for wafer slicing   

P-type **** ohm.cm

Lifetime: >2us (after passivation)

Oxygen concentration: <**** atoms/cm3

Carbon concentration: <**** atoms/cm3

Dislocation Density: <**** ea/cm2

  

Standard Testing Equipments

After giving written notice to Party B and be confirmed by Party B, Party A shall be allowed to send people to Party B’s workshops for on site inspection.

Solar grade wafers    Monocrystalline and Multicrystalline wafers used for solar cells production   

TTV < **** um

BOW < **** um

Warp < **** Chips and Edge defects:

Length <**** mm

Depth <**** mm

Less than **** places

Saw mark: as sawn and clean, depth <**** um

Crack, pinhole, unclusion, V-type chip: not visible allowed

Surface: no stain or any other chemical or organic residue

  

Standard Testing Equipments.

After giving written notice to Party B and be confirmed by Party B, Party A shall be allowed to send people to Party B’s workshops for on site inspection.

Solar grade cells

( If Jinko’s)

   Monocrystalline and Multicrystalline solar cells used for solar module production   

Front: silver bus bar

Back: Silver/aluminum bus bars

Sorting: strictly by efficiency and defects

   Standard Testing Equipments
Solar Panel    Frame   

Damage on surface of the frame: not allowed

 

   Measuring tape
     

Broken on anodic oxidation: not allowed

Layer of the frame: not allowed

 

  
     

Frame assembling (offset of the front side of the module between the length side and short side): á **** mm

 

   Steel tape
     

Frame assembling (offset of the back side of the module between the length side and short side): á **** mm

 

   Steel tape
     

Frame assembling (offset of the lateral side of the module between the length side and short side): á **** mm

 

   Steel tape
     

Frame dimension:

±2mm tolerance is allowed on the length and short side frame

±3mm tolerance is allowed on the diagonal

  

Measuring tape

8 locations shall be measured:

- 2 measurements on the length side frame

- 2 measurements on the short side frame

- 3 measurements on the diagonal

     

Gap between frames: á 0.3mm

 

   cork gauge
      Contamination on the frame: not allowed   

 

**** Confidential material omitted and filed separately with the Commission.

 

16


   Lamination   

EVA Bubbles Delamination:

Number of bubbles out of the cell area: <****

Area of each bubble: **** mm2;

 

  
     

No breakage allowed on the back sheet

 

  
     

Elongated Glass Bubble: not allowed

 

  
     

No breakage allowed on the coating of the glass

 

  
     

Contamination on the TPT: not allowed

 

  
     

Contamination on the glass surface: not allowed

 

  
      Impurity: Soldering tin   

>**** negative contacts: not allowed

Tin clinker >**** mm2: not allowed

 

   Steel tape
      Impurity: Breakage   

Breakage on the thicker contact of the cell >**** : not allowed

 

  
        

V type: depth > **** mm: not allowed

 

   Steel tape
        

U type: depth > **** mm: not allowed Thinner contact breakage depth of the breakage >**** mm: not allowed

 

   Steel tape
     

contamination and scratch on the cell, finger print: not allowed

 

  
     

Oxidized cell contact: not allowed

X-Rays tests showing defects on the solar cells (black-spots): not allowed

 

  
     

Thinner cell contact length > **** mm: not allowed

 

  
      Outgoing wire of the interconnect tabs must be sealed   
   Junction Box    Typing errors on junction boxes, cables, plugs and cables fixed is not allowed   
      The outgoing wire of the interconnect tabs must be sealed   
   Label    On Back Sheet: Bubbles, tilt, creases of labels: not allowed   
      On Packaging Box: Tilt is not allowed   
   BOM    Only BOM as per contract is allowed   
Packaging       Breakage is not allowed   
Pallet    Pallet to support solar panels   

Height of the Pallet forklift mouth > **** mm

Area of the pallet surface shall be larger than the packaging

  
Container    Container to load solar panels   

Solar modules are not allowed to load if there are leakage and breakage in the container.

Pictures should be taken before shipping as well as record of the container number and lock number.

  

 

**** Confidential material omitted and filed separately with the Commission.

 

17

Sales Contract between Shangrao Jinko Import and Export Co., Ltd.

Exhibit 10.58

Sales Contract

Between:

SALES CONTRACT 221213232333

        Contract No.:

This sales contract (“Contract”) is entered into on [2010], March 22 (“Effective Date”) in Shanghai, PRC.

Between:

(1) ShangRao Jinko Import and Export Co., Ltd. (Hereinafter referred to as the “Seller”)

Address: Xuri District, Shangrao Economic Development Zone, Jiangxi Province, China

Tel: +86-793-8469699

Fax:+86-793-8461152

(2) [Name of the Customer] (Hereinafter referred to as the “Buyer”)

E environment-energy GmbH

Address: Leitzstr. 45 D 70469 Stuttgart

Tel: +49 (0)711 490 66 237

Fax:+49(0)711 490 66 238

(The Seller or the Buyer hereinafter referred to individually as a “Party” and collectively as the “Parties”)

For the year 2010, the undersigned Seller and Buyer agreed to conduct transaction according to the terms and conditions stipulated below.

The agreement shall be entered into force for a period of April 2010 to December 2011 with the future order note.

 

   

Names of goods and specifications:

 

Type

  

Quantity

Quarterly

  

Indicated Price/Watt

CIF (Euro)

  

Average Power

  

Amount/quarter

(Euro)

Polycristalline Solar Modules

****W / ****W

Cell: ****mm

Module: ****mm

   Q1: **** MW   

****According the

Nominal Power

   ****W+****W   
   Q2: ****MW         
   Q3: ****MW         
   Q4: ****MW         
Total    ****MW         

Monocristalline Solar

Modules ****W/****W

Cell: **** x****mm

Module: ****

        ****

   ****MW   

CIF Euro

****/WP

According the

Nominal Power

   ****W+****W    April

 

**** Confidential material omitted and filed separately with the Commission.

 

1


Monocristalline Solar Modules

****W/****W

Cell: ****mm

Module: ****mm

        ****mm

   ****MW    CIF Euro ****/WP According the Normal Power    ****W+****W    Mai

Monocristalline Solar Modules

****W/****W

Cell: ****mm

Module: ****mm

        ****mm

   ****MW   

CIF Euro

/WP According the

Normal Power

   ****W+****W    June

Monocristalline Solar Modules

****W/****W

Cell: ****mm

Module: ****mm

        ****mm

   ****MW   

CIF Euro

/WP According the

Normal Power

   ****W+****W    July

Monocristalline Solar Modules

****W/****W

Cell: ****mm

Module: ****mm

        ****mm

   ****MW   

CIF Euro

/WP According the

Normal Power

      August

Monocristalline Solar Modules

****W/****W

Cell****mm

Module: ****mm

        ****mm

   ****MW   

CIF Euro

/WP According the

Normal Power

      September

Monocristalline Solar Modules

****W/****W

Cell: ****mm

Module: ****mm

        ****mm

   ****MW   

CIF Euro

/WP According the

Normal Power

      October

Monocristalline Solar Modules

****W/****W

Cell: ****mm

Module: ****mm

        ****mm

   ****MW   

CIF Euro

/WP According the

Normal Power

      November

 

Item

  

Description

of Products

  

Quantity

  

Unit Price

  

Total Amount

     

(W)

  

(PCS)

  

(/W)

  

(/PC)

  
1    ****    ****    ****    ****    ****    ****
2    ****    ****    ****    ****    ****    ****
                  ****
Total: EURO ****

 

**** Confidential material omitted and filed separately with the Commission.

 

2


For 2011 to 2012

 

Type

  

Quantity

Quarterly

  

Indicated Price/Watt CIF
(Euro)

  

Average Power

  

Amount/quarter (Euro)

Polycristalline Solar

Modules ****W / ****W

Cell: ****mm

Module: ****mm

   2011    The Price will be discussed in Nov. 2010/and in Nov. 2011    ****+****W   
   T.B.D.         
   2012         
   T.B.D.         

Monocristalline Solar

Modules ****W/****W

Cell: ****mm

Module: ****

****

  

2011

T.B.D.

   The Price will be discussed in Nov. 2010/and in Nov. 2011    ****W+****W   

 

   

The specifications of the modules ****W / ****W poly ****W/****W Mono – Tolerance range: ****W) are subject to the contract and are attached as Appendix I. Any change of the specifications has to be agreed upon by both parties.

 

   

E environment-energy GmbH gives the Seller a 2 Month Forecast, the real specification of the Modules, will be sent out to Seller 4 Weeks before the goods will go to Chinese Port.

 

  2. Terms of payment:

 

  1. The above trade term shall be subject to the International Rules for the Interpretation of Trade Terms adopted by the International Chamber of Commerce effective January 1, 2000, including all amendments thereof (“INCOTERMS 2000”).

 

  2. CIF, Hamburg port, Germany or CIF any other European port

 

  3. The Buyer shall effect ****% payment in advance for each order quantity by T/T within 3 working days after order confirmation and P/I opened from the Seller. The Seller open Bank Guarantee to buyer for each order Quantity, If the Seller cannot fulfil the order 5 days after the expected delivery date. The Seller will return the down payment to buyer under guarantee of the seller’s bank.

 

  4. The remaining ****% balance of payment shall be paid for each shipment to seller upon receipt of the shipment to the buyer’s port. Payment shall be sent to seller no later then one (1) working days before receipt of shipment

 

  5. The original B/L will be sent out to the buyer by express or the B/L will be telex released to the Buyer as soon as the Seller received the balancing payment for each shipment.

 

  6. If requested by either party, the price can only be adjusted 15 days before each quarter.

The Seller gives the following notice of each shipment latest together with B/L:

 

   

flash data of each single module (excel-sheet format by email)

 

   

quantity of each module class

 

**** Confidential material omitted and filed separately with the Commission.

 

3


  3. Packing (Modules)

All goods shall be packed in a way, which prevents damages from dampness, rust, moisture, erosion and shock. Packaging shall be adequate for transport on the ocean.

The modules are packaging with 24pcs/carton downside, 24pcs/carton with 1 box with 2 pcs inside on top, total 700pcs each 40” HQ.

The Buyer will send Photos for the Packaging and Loading the Container.

Additionally, the Seller will give respect to the following points:

 

   

The power-output of each module will be written clearly on the front side of the carton.

 

   

Only one module-power class in each carton.

 

   

Only one module-power class on one pallet

 

   

The boxes will be marked according to Buyer’s requirements.

 

  4. Warranty

Seller shall warrant that the performance, quality and specifications of modules are strictly in conformity with its standard production, descriptions and explanations provided by Seller to Buyer as specified in Appendix II.

 

  5. Certifications

 

   

Seller will provide IEC61215 and IEC61730 certificates granted by TUV Rheinland –Germany, UL1703 .

 

   

The certifications of IEC61215 , IEC61730, VDE and UL1703, certificates are owned by the Seller.

 

   

The modules will be marketed as OEM products (EGT). The Buyer guarantees that the OEM Certificate provided by the Seller will not be abused (e.g. the Seller’s OEM certificated used for other manufacturer’s products)

 

   

The Seller guarantees that he doesn’t sell the Modules with the EGT Logo to other costumers.

 

  6. Confidentiality

All involved parties shall treat the content of the agreement and mutual access to information during cooperation, governed by the agreement, confidential.

 

  7. Arbitration

All disputes arising from the execution or in connection with this contract shall be settled through friendly negotiation. If no settlement can be achieved, the parties shall appeal to the International Chamber of Commerce (ICC) for arbitration. The decision of ICC is binding for both parties.

 

  8. Force Majeure

No party shall be held responsible for failure of delay to perform all or any part of the contract due to Force Majeure condition, including flood, fire, earthquake, drought, war or any other events, which could not be predicted at the time of the conclusion of the contract, and could not be controlled, avoided or overcome by any party. However, the party affected by the event of Force Majeure shall inform the other Party of its occurrence in written as soon as possible and thereafter send a certificate of the event issued by the relevant authority to the other party but no later than 15 days after its occurrence. If the event of Force Majeure last over 90 days, the relevant parties shall negotiate the performance or the termination of the contract.

 

4


  9. Breach Liabilities

 

  A. Based on the requirement of Seller’s commercial strategy, Buyer warrants that it shall not resell Seller’s Product into the country of Israel, failing of which Buyer shall be fully responsible for all of loss of Seller.

 

  B. In dealings between Buyer and Seller, Buyer shall under no circumstances reveal the identity of Buyer’s customers, either internally or to parties external to the Seller’s company. In addition the Seller shall under no circumstances contact the customers of the Buyer. Violation of any of the above conditions shall result in heavy penalty by the Buyer. The cost of such penalty will be determined at the discretion of the Buyer. Furthermore, violation of above conditions may result in legal action by the Buyer.

 

  C. Buyer shall warrant that it holds good commercial reputation and is in good financial condition, failing of which Buyer shall be fully responsible and compensate Seller’s loss therein provided that Seller cannot obtain any loan and insurance policy due to Buyer’s such failure. The above stated conditions and disputed violations thereof shall fall under German ‘GMBH’ Law

 

  D. Unless otherwise provided for under this Contract, if Buyer delays in making payment, Buyer shall pay liquidated damages equal to 0.04% of the Contract amount per day to the Seller. If the delay exceeds thirty (30) days, Buyer shall be deemed as unable to pay, and Seller shall have the right to terminate the Contract immediately and require the Buyer to pay liquidated damages equal to 10% of the Contract amount without affecting the Seller’s other rights under the Contract.

 

  E. Unless otherwise provided for under this Contract, if Seller delays in making delivery as defined as receipt of shipment at Buyer’s port, Seller shall pay liquidated damages equal to 0.04% of the Contract amount per day to the Buyer. If the delay exceeds thirty (30) days, Seller shall be deemed unable to deliver, and Buyer shall have the right to terminate the Contract immediately and require the Seller to pay liquidated damages equal to 10 (ten) % of the Contract amount without affecting the Buyer’s other rights

 

  F. If the Buyer fails to make payment or terminates the Contract unilaterally, the Buyer shall pay liquidated damages equal to 10% of the Contract amount without affecting the Seller’s other rights under the Contract.

 

  G. If the Seller indicates through communication or action that they are unable to deliver the shipment for any reason or terminates the Contract unilaterally, the Seller shall pay liquidated damages equal to 10 (ten) % of the Contract amount without affecting the Buyer’s other rights under the Contract.

 

5


  10. Contract Disclosure

Buyer agrees that Seller can disclose the main content of this Contract to the state security commission of the country where Seller is preparing for its listing affairs as legally required.

 

  11. Non-transfer

No right to transfer any right or obligation of this Contract by any Party without express written approval of the other Party.

 

  12. Confidentiality

Both Parties agree to maintain confidentiality concerning the details of this Contract, except in the event where a disclosure: (i) is necessary for each Party to the financial institutions for the purpose of financing this Contract; (ii) is required by applicable law either of each Party’s country; (iii) is required by court order or by stock exchange authorities. The Parties shall make provisions that employees and third Parties entrusted with implementing the Contract are bound to this obligation of secrecy. This also applies to the presentation of this Contract for legal examinations or audits by legal consultants and tax advisors, investors and banks.

 

  13. Miscellaneous

 

  (1) This Agreement contains the complete agreement between the Parties with respect to the subject matter hereof and supersedes any prior understandings, agreements or representations by or between the Parties, written or oral, which may have related to the subject matter hereof in any way.

 

  (2) The terms of this Agreement may not be amended or waived except in writing executed by the party against which such amendment or waiver is sought to be enforced.

 

  (3) If any provision of this Agreement is determined to be invalid, the validity of the remainder of this Agreement shall remain unaffected. The parties agree to replace, to the extent possible, any invalid Provision with a valid Provision that comes as close as possible to the parties original economic intent.

 

  (4) This Agreement shall be governed by and interpreted in accordance with the laws of United Nations Convention on Contract for International Sales of Goods (CISG).

 

  (5) Both Parties herewith confirms the receipt of a copy of this Agreement executed by both parties.

 

  (6) This contract is prepared in two copies only (English Language).

 

  14. Attachments

Appendix I: Material List

Appendix II: Limited Warranty

Appendix III: Inspection Process

 

6


Germany:   China:
E environment-energy GmbH   Jinko solar .Co., Ltd.

E environment-energy GmbH

leitzstraße 45

 
D-70469 Stuttgart  

 

/s/ Jan Schuppert     /s/ Jinko Solar Co., Ltd.
Jan Schuppert    
(Managing Director)    

 

7


Annex I (Material List)

Material List of the PV Modules

 

Item

  

Producer

  

Model

  

Certificate No.
(If applicable)

Solar Cell         
EVA         
Back Sheet         
Glass         
Al. frame         
Stannum belt         
Blocking cement         
Welding Flux         
Junction Box         
Connector         
Cable         
Bypass Diode         
PV module         

 

1


Appendix II (Warranty)

Jinko Solar Warranty Terms 2009

Photovoltaic Module Limited Warranty (DRAFT)

 

1. Limited Product Warranty-Five Year Repair, Replacement or Refund

Jinko Solar Co., Ltd. (“Jinko”) warrants that its photovoltaic modules together with the DC connector cable assemblies are free from defects, if any, in materials and workmanship under normal application, use, installation and service conditions for a period of pending sixty (60) months from the shipment date of Jinko modules (“Modules”) to the original end-customer (“Customer”). If Modules become malfunction or inoperative due to defect in material or workmanship during such pending sixty (60) months period set forth above, Jinko will, at its own option, either repair or replace the Modules in problem, or refund a reasonable portion of the purchase price as paid by the Customer (“Purchase Price”). The repair or replacement or refund remedy shall be the sole and exclusive remedy provided under this Limited Warranty.

 

2. Limited Peak Power Warranty and Limited Remedy

 

  A. **** years

Provided that, within a period of ****years from the shipment date of the Modules to the Customer, any Module exhibits a power output less than 90% of the minimum peak power at Standard Test Conditions, and the reason for such loss in power is due to Modules’ defects in material or workmanship attributed to Jinko, who will, at its sole option and secretion, either [1] make up such loss in power by providing to Customer additional Modules; or [2] repair or replace the defective Modules including free shipping to the place supplied by Jinko; or [3] refund Customer such loss proportion arising from unqualified power output which less than 90% of the minimum peak power.

 

  B. 25 years

Provided that, within a period of twenty-five (25) years from shipment date of the Modules to the Customer, any Module exhibits a power output less than 80% of the minimum peak power at Standard Test Conditions, and the reason for such loss in power is due to Modules’ defects in material or workmanship attributed to Jinko, who will, at its sole option and secretion, either [1] make up such loss in power by providing to the end-user Customer additional Modules; or [2] repair or replace the defective Modules including free shipping to the place supplied by Jinko; or [3] refund Customer such loss proportion arising from unqualified power output which less than 80% of the minimum peak power.

The remedies sets forth in Section 2 are the sole and exclusive remedies provided under the limited minimum Peak Power Warranty.

 

3. Exclusive and Limitations;

 

  A. Warranty claims, in any event, shall be filed in writing to Jinko or its authorized distributions within the applicable warranting period.

 

**** Confidential material omitted and filed separately with the Commission.

 

2


  B. These Limited Warranties will not be applied to normal wear and tear, to the natural effects of exposure to weather conditions over time, or to Modules which under Jinko’s sole judgement have been subjected to:

 

   

Misuse, abuse, neglect, vandalism or accident;

 

   

Alteration, improper installation or application;

 

   

Repair or modifications that do not strictly follow the manufacture’s instructions;

 

   

Non-observance of Jinko’s maintenance instructions;

 

   

Power failure, electrical spikes or surges, lighting, flood, fire, accidental breakage or other events outside the control of Jinko.

 

  C. These Limited Warranties only cover the transportation costs for shipment of any repaired or replaced Modules to the place applied by Jinko. Any costs for returning the Modules to Jinko or its authorized agents and authorized distributors, or costs associated with installation, removal or reinstallation of the Modules, shall be borne by the end user Customers.

 

  D. Warranty claims will not be honored if the type or serial number of Jinko Modules have been altered, removed or made illegible without written authorization from Jinko.

 

4. Transferability

This warranty is extended to the original end-user purchaser, and is also transferable to any subsequent owner of the location or holder of the product when Module(s) remain at their original installed location upon satisfactory proof of succession or assignment.

 

5. Obtaining Warranty Performance

In order to obtain warranty service under the Jinko Limited Warranty, the end user Customer should promptly notify Jinko regional customer service center. Together with the notification, the complete serial number printed on the module label and the shipment date of its Modules shall be marked as well. If the Modules will be returned for inspection, repair or replacement by Jinko, Jinko will give the Customer a Return Merchandise Authorization (RMA). However, Jinko will not accept a return of any Modules without a RMA.

 

6. Disputes

No action, regardless of form, arising out of or in any way connected with this Limited Warranty, may be brought by the end user Customer more than one (1) year from the date when causes of action occurred.

 

7. Various

The repair or replacement of the Modules or the supply of additional Modules does not lead to a new commencement of warranty terms, nor shall the original terms of this Limited Warranty be extended. Any replaced Modules shall become the property of Jinko. Jinko shall at its own options to deliver another type of PV Modules (different in size, color, shape, or power), either a new brand or the original one, in case of that Jinko has discontinued producing the module in question at the time of the claim.

 

3


8. Force Majeure

Jinko shall not be in any way be responsible or liable to the end user Customer or any third party arising out of any non-performance or delay in performance of any terms and conditions of sale, including this Limited Warranty, due to fire, flood, blizzard, hurricane, thunder, acts of God, changes of public policies, terrorism, war, riots, strikes, unavailability of suitable and sufficient labor or materials and other events which are out of control of Jinko.

 

NOTE: “Peak Power” is the power in watt peak that a PV-module generates in its maximum power point. Jinko Solar measurements are as follows (a) light spectrum of AM 1.5, (b) an irradiation of 1,000W perm2 and (c) a cell temperature of 25 degree Centigrade. The measurements are carried out in accordance with IEC61215 as tested at the junction box terminals per the calibration and testing standards of Jinko valid at the date of manufacture of the PV-Modules. Jinko’s calibration standards shall be in compliance with the standards applied by international institutions accredited for this purpose.

Jinko Solar

2009.12.31

 

4


APPENDIX III (Inspection Process)

INSPECTION PROCESS

FOREWORDS

The Buyer is entitled to carry out inspections and tests before the shipment of the PV modules (the “Modules”). These inspections and tests may be performed by the Buyer or external staff assigned by the Buyer (the “Inspector”).

As part of the inspections, an analysis of a certain quantity of the Modules randomly extracted from the batch may be performed. Afterwards, the Buyer will make a preliminary decision on the quality of the Modules contained in the batch. For the avoidance of doubt, this decision will in no way limit the rights of the Buyer with respect to any defects of the Modules under other warranties.

A batch is defined, as one shipment to be received by the Buyer from the Seller. In one shipment, there could be one or more containers with a number of Modules per container.

INSPECTIONS AND TESTS

 

1 DETERMINATION OF THE MAXIMUM POWER

 

1.1 How to obtain the samples

Normally, the Inspector will choose 5% of the total quantity of the Modules from each container. Such samples must be extracted from the container on a random basis. The flash list of the container should be submitted to the inspector by the Seller before the tests.

 

1.2 The maximum power test (According to IEC61215:2005, 10.2)

The inspector will use a standard module to test these samples. The standard module should be calibrated by the TUV Rheinland Cologne Lab or Shanghai Lab or by the ISE Fraunhofer with a valid calibration report within one year.

 

 

Inspection tools to be used: A sun simulator equipped with a computer.

 

 

Details to be determined through the inspection: electrical characteristics of the Modules.

 

 

Sample quantity: 5% of the Modules contained in each container.

 

 

Method to be used for the inspection:

 

  a)

Standard test condition: Irradiance 1000W/m2, Module temperature 25°C,

 

  b) The test can be performed if the temperature is not 25°C. The temperature of the standard module should be the same as that of the test samples; otherwise the temperature coefficient of the test samples must be taken into calculation in the final maximum power result. The calculation details is stipulated in the Clause 1.3;

 

  c) Adjust the solar simulator with the standard Module;

 

  d) Start to flash test the samples, I-V curve and other main data shall be displayed on the computer screen.

 

1.3 Result processing

 

 

Rejected samples

Any Module which the maximum power deviates more than 0~+5Wp from its label power should be replaced by other module with the agreed quality samples.

 

5


 

Final average power adjusting for the whole container

 

  a) Average power tolerance: When the results of all the samples in the inspection test are compared with the results of these samples in the flash test report provided before the testing by the Seller, an average power tolerance (“APT”) can be calculated out as below.

APT=(åAll the samples (W1-W2-W3×PTC×DT)/Samples quantity

W1=the test result, W2=the result in the flash report provided by the seller,

W3=Label power, PTC=Power Temperature Coefficient,

DT=Temperature of the standard module-Temperature of the test samples

APT=(åAll the samples (W1-W2-W3×PTC×DT))/Samples quantity

 

  b) If the APT is lower than -0.5% of the sample’s label power (-0.5% is not included), the final average power of the whole container will be adjusted by using APT. For example, the average power result of the whole container in the flash report provided by the Seller is 175.5Wp/module (label power 175Wp), and the APT is -1.0Wp/Module, then the final average power of the whole container should be 175.5-1.0=174.5Wp.

 

  c) If the APT is equal to or higher than -0.5% of the sample’s label power, the final average power of the whole container will follow the result in the flash report provided by the Seller.

 

 

Retest

If the Buyer or the Seller does not recognize the inspection results, another 5% of the Modules of the total quantity will be extracted from the remaining modules of the container randomly for repeating the tests described in clauses 1.1, 1.2 and 1.3 above. Then the APT will be calculated based on the whole 10% samples.

 

 

Confirmation of final average power of the container

The final average power of the whole container (APT was taken into consideration) should not deviates more than 0~+5Wp of the label power. Otherwise the whole container will be rejected.

 

2 VISUAL INSPECTIONS

 

2.1 How to obtain the samples

(According to general inspection levels I, ISO 2859-1)

Normally, the Inspector will perform double sampling plan according to general inspection levels I, ISO2859-1, as the below table shows. The samples must be extracted from the batch which may include one or more containers on a random basis.

For those batch size less than 51 or larger than 10,000, the sampling plan will be performed according to the buyer’s requirements.

 

Batch Size

   First Sampling Size
(Double  sampling plan, General inspection levels I, ISO 2859)

51 to 90

   3

91 to 150

   5

151 to 280

   8

281 to 500

   13

501 to 1,200

   20

1,201 to 3,200

   32

3,201 to 10,000

   50

 

6


2.2 Visual Inspection Criterion (According to IEC 61215:2005, 10.1)

 

 

Any of the followings will be considered individually as a defect of the Modules

 

  a) Broken, cracked or chipped cells;

 

  b) More than 1 scratch or pollution on cell surface for a diameter or length more than 5mm;

 

  c) Cells touching one another or the frame;

 

  d) Distance between cells less than 1.0mm;

 

  e) Cracked, bent, misaligned or torn external surfaces;

 

  f) Any scratch in the back sheet

 

  g) The depth of the cockle in the back sheet more than 0.3mm;

 

  h) Any cockle in the back sheet with a diameter or length more than 10mm;

 

  i) More than 4 cockles with a diameter or length more than 5mm;

 

  j) Any scratch in the glass surface with length more than 10mm; Or more than 4 scratches in the glass surface;

 

  k) Any bubble with a diameter or length more than 1.0 mm; Or Bubbles more than 1 piece;

 

  l) Any dust with a diameter or length more than 3.0 mm; Or dusts more than 4 pieces;

 

  m) Faulty interconnections or joints;

 

  n) Female and male connectors cannot be automatically locked, or can be loosened by pulling with hand;

 

  o) Failure of adhesive bonds;

 

  p) Bus bar ribbon has copper coating exposing;

 

  q) The distance between Bus bar ribbon and frame is less than 8mm;

 

  r) Tacky surfaces in the plastic materials;

 

  s) Active electrical areas are not covered;

 

  t) Damaged or unclear serial number or label;

 

  u) Any other defect that could affect the normal behaviour of the module.

 

2.3 Result processing

 

 

Rejected samples

Any modules which has above defects should be rejected.

 

 

Rejected batch

The inspector will judge the acceptance of this batch by using the smallest AQL (acceptance quality level) which possibly can reach with the sample size. The smaller the AQL, the smaller the risk of the batch quality.

 

  a) If there is more than one sample rejected, the whole batch should be regarded as unacceptable.

 

  b) If only one sample is rejected, more samples which equals the first sample size should be extracted from the batch, and visual inspections described in clauses 2.2 and 2.3 should be repeated. If again there is one or more new sample rejected, the whole batch should be regarded as unacceptable.

 

 

Determine the value of AQL (Acceptable Quality Level)

The inspector will determine the value of AQL for the visual inspections of this batch according to the inspection results;

 

2.4 100% visual inspection

If the whole container is rejected, A decision for a 100% visual inspection will be made by the buyer. The 100% visual inspection will be performed by the inspector.

 

7


3 MATERIALS AND MATERIAL COMBINATIONS CHECK

the Buyer is entitled to verify whether the materials used for the Module production conform to the in Appendix II agreed materials and material combinations (or in the purchase order specified materials and materials combinations) by means of random sampling of delivery notes and work slips for the past period and the inspection of inventory of the Seller.

Reasons for rejection:

The Buyer is entitled to reject the whole batch, if

 

a) The delivery notes, the inventories, or the work slips of the materials and materials combinations are not provided by the Seller; or

 

b) The amount of the materials and materials combinations in the delivery notes, the inventories or the work slips does not cover all of the Modules contained in the batch; or

 

c) Any information regarding the models or the type designation of the materials and materials combinations is missing in the delivery notes, the inventories or the work slips; or

 

d) A discrepancy of any kind is found as a result of the sampling and inspection of the delivery notes, inventory or work slips.

 

4 PACKING CONTROL

Packing the modules to the container will be controlled by the inspector to ensure the shipment. In this section, the inspector will check the following details.

 

a. Security against fracture;

 

b. Seaworthy package;

 

c. Identification marking;

 

d. OEM labelling according the buyer’s specifications;

 

e. Container loading for convenient handling/unloading;

 

8

Sales Contract

Exhibit 10.59

Sales Contract

Between:

MAGE Solar GmbH

An der Bleicherei 15

88214 Ravensburg, Germany

Hereafter referred to as “Buyer”

and

Jinko Solar Import Export Co., Ltd.

Xuri District, Shangrao Economic Development Zone,

Jiangxi Province, China

Hereafter referred to as “Seller”

For the year 2010, the undersigned Seller and Buyer agreed to conduct transaction according to the terms and conditions stipulated below.

The agreement shall be entered into force for the period of 1st May, 2010 to December 31, 2010 with a further notice for 2011 to 2012.

 

   

Names of goods and specifications:

 

1


Type

  

Quantity

Quarterly

  

Indicated

Price/Watt

CIF (Euro)

   Average
Power
   Amount/quarter
(Euro)

Monocrystalline Solar

Modules ****W - ****W

Cell: ****mm / 5’’

Matrix: 6 x 12

****mm

  

Q1 : **** MW

 

Q2 : **** MW

  

Mono

Modules:

****

 

Poly Modules:

****

 

Prices fixed for May 2010

 

According the Nominal Power

  

****W

 

****W

 

****W

 

****W

 

****W

  
           

Polycrystalline Solar

Modules ****W – ****W

Cell: ****mm / 6’’

Matrix: 6 x 10

   Q3 : **** MW         
   Q4 : ****MW         

Total

  

 

20 MW

        

For 2011 to 2012

 

Type

  

Quantity

Quarterly

  

Indicated

Price/Watt

CIF (Euro)

   Average
Power
   Amount/quarter
(Euro)
  

2011

 

  

The price will be discussed in Nov. 2010 and in Nov. 2011

     
  

T.B.D.

 

        
  

2012

 

        
   T.B.D.         

 

**** Confidential material omitted and filed separately with the Commission.

 

2


CIF Hamburg

 

   

The specifications of the modules (****W / ****W / ****W / ****W / ****W / ****W /****W / ****W / ****W / ****W / ****W / ****W / ****W ) – Tolerance range: -0/+5 W ) are subject to the contract and are attached as Appendix I. Any change of the specifications has to be agreed upon by both parties.

 

   

Mechanical Loading of all modules: **** Pascal.

 

   

All modules will be equipped with original MC4 (or alternative connectors of type ZJRH 05-6) connectors and a cable length of **** mm for monocrystalline modules ****Wand **** mm for polycrystalline modules and monocrystalline modules ****W.

 

   

Mage Solar GmbH gives the Seller a 3 Month Forecast, the real specification of the modules will be sent out to the Seller before the goods will be delivered to Chinese Port.

 

2. Terms of Payment:

 

2.1 CIF bonded warehouse Hamburg. The Seller is responsible to hire a bonded warehouse in Europe for up to 1-2 MW storage capacity. FOB is possible if Buyer and Seller mutually agree on that.

 

2.2 No payment in advance is effective.

 

2.3 Time of delivery: latest **** days after PO, which will be provided by the Buyer in English.

 

2.4 The Seller is responsible to hire a bonded warehouse in Europe to store the Buyer’s containers (storage capacity 1 – 2 MW). The costs of the bonded warehouse will be covered by the Seller. The Buyer agrees to pay and pick up the goods within a certain time.

 

2.5 Payment method:

 

  (1) For the first payment in May of 2010:

Buyer shall pay to Seller **** % Advance Payment by telegraph transfer within **** working days. The remaining **** % balance of payment shall be paid for each shipment to Seller upon receipt of the shipment to Hamburg port. Payment shall be sent to the Seller not later than **** working days before arrival at Hamburg port. After the shipment the Seller must send the B/L copy without any delay to the Buyer. The original B/L will be sent out to the Buyer by express or the B/L will be telex released to the Buyer as soon as the Seller receive balance payment.

 

  (2) From June 2010 the payment will be done as follows:

For each shipment the Buyer shall pay to the Seller **** days before the goods arrive in Hamburg port or before picking up the goods from the Seller’s bonded warehouse.

The Seller is obligated to release the containers immediately after receiving the full payment.

 

**** Confidential material omitted and filed separately with the Commission.

 

3


2.6 The total value of each shipment will be calculated according to the nominal power-output of the modules as per commercial invoice.

 

2.7 If requested by either party, the price can only be adjusted **** days before each quarter, according to market tendencies, after the agreement of two Parties.

The Seller gives the following notice of each shipment latest together with copy B/L:

 

   

Flash data of each single module (format according to Requirements by Supplier as in Appendix)

 

   

Packing list (quantity of each module class)

 

   

Commercial Invoice

 

   

Certificate of Origin

 

3. Packing (Modules)

All goods shall be packed in a way, which prevents damages from dampness, rust, moisture, erosion and shock. Packaging shall be adequate for transport on the ocean and if applicable for shipment by air as well.

The mono **** W modules are packed on 28 pallets, 700 pcs in total for each 40” HQ. The Poly **** W modules are packed on 26 pallets with 624 pcs in total for each 40” HQ. For mono **** W / **** W / **** W the modules are packed on 28 pallets, 560 pcs. in total for each 40” HQ

Additionally, the Seller is obligated to follow the instructions and standards as mentioned in the Requirements for Suppliers as in Appendix.

 

4. Warranty

The Seller shall warrant that the performance, quality and specifications of the modules are strictly in conformity with its standard production, descriptions and explanations provided by Seller to Buyer as specified in Appendix II.

 

5. Certifications

 

5.1 The Seller will provide IEC 61215 and IEC61730 certificates granted by TÜV – Germany, UL1703 (and/or other relevant certifications).

 

5.2 The certifications of IEC61215, IEC61730, TÜV Germany and UL1703 are owned by the Seller.

 

5.3

The modules will be marketed as OEM products (MAGE SOLAR®, MAGE Powertec® PLUS). The Buyer guarantees that the OEM Certificate provided by the Seller will not be abused (e.g. the Seller’s OEM certificates used for other manufacturer’s products)

 

**** Confidential material omitted and filed separately with the Commission.

 

4


5.4

The Seller guarantees that he doesn’t sell the Modules with the MAGE Powertec® PLUS Logo to other costumers.

 

  (1) Buyer consigns the commission of the OEM Product to Seller, and Seller agrees to manufacture the OEM Product upon the terms and conditions of this Contract (the “OEM Processing”).

 

  (2) Seller shall manufacture the OEM Product in accordance with its standard manufacturing specifications unless otherwise requested by Buyer. In the event the Buyer requests special manufacturing specifications for the OEM Product, Buyer shall provide Seller with a written request for special manufacturing specifications, including a bill of materials (“BOM”) as well as quality control standards within five (5) days after the effective Date. The special manufacturing specifications shall be subject to Seller’s acceptance and shall come into effect only upon written confirmation by Seller.

 

  (3) All orders for the OEM Products shall be in writing, specifying the quantity of the OEM Product and the expected delivery date, and forwarded to Seller at least 14 days prior to the requested delivery date. All orders shall be subject to acceptance by Seller and shall be subject exclusively to this Contract. This Contract shall not be modified or supplemented by any communication, order, or other document from Buyer or Seller unless such communication is in writing, identified as an amendment to this Contract, and subsequently accepted in writing by two Parties.

 

  (4) Seller shall notify Buyer of each order to be delivered in advance (the “Delivery Notice”) and deliver the OEM Product to the address designated by the Buyer for delivery of the OEM Product, Buyer shall make all necessary arrangements to facilitate delivery of the OEM Product. In the event that Seller is unable to deliver the OEM Product by the confirmed delivery date, Seller shall inform the Buyer of such delay within 10 days prior to the expected delivery date and the Parties shall use their reasonable efforts to reschedule the delivery.

 

  (5) At delivery, Buyer shall check the type and quantity of the OEM Product delivered and sign the confirmation letter of receipt of Delivery Confirmation Letter, the date of which shall be the “Delivery Date”. After execution of the Delivery Confirmation Letter, Seller shall be deemed to have discharged all obligations under the order so delivered.

 

  (6) Authorization

Buyer is entitled to sell the OEM Product all around the world.

 

  (7) Buyer and Seller both agree that the OEM Product shall be manufactured under the OEM Brand. The Seller hereby grants to Buyer a non-exclusive, non-transfer, royalty-free license to use the OEM Brand, and the Seller shall promptly provide samples, specifications and/or instructions thereof for the use of the OEM Brand to Buyer.

 

  (8) Seller shall manufacture the OEM Product in accordance with its standard manufacturing specifications unless otherwise requested by Buyer. In the event the Buyer requests special manufacturing specifications for the OEM Product, Buyer shall provide Seller with a written request for special manufacturing specifications, including a bill of materials (“BOM”) as well as quality control standards within five (5) days after the effective Date. The special manufacturing specifications shall be subject to Seller’s acceptance and shall come into effect only upon written confirmation by Seller.

 

5


  (9) Product

Seller will prepare the OEM Products based on the Purchase Order from Buyer, which shall be agreed by both Parties in written.

 

  (10) Raw Materials.

Seller is solely responsible for the sourcing of all raw materials and any other supplies for the manufacturing of the OEM Product. Each BOM for the OEM Product shall be made and provided solely by Seller in accordance with the column “Primary BOM” of the table adjacent to this paragraph. No amendment to such BOM shall be made unless agreed upon by both Parties and permitted by relevant certification authorities if applicable. In the event the Buyer requests special manufacturing specifications and BOM for the OEM Product and a particular material is, or becomes unavailable, Seller may, upon written confirmation from the Buyer, source and use a reasonable substitute material for Buyer. All Raw materials must be certified along with the module (TÜV, VDE).

 

  (11) Inspection

Seller shall enable Buyer to inspect the production of the OEM Product to the Buyer’s designated employees and allow access and inspection to the production workshops of Seller to be used for the production of the OEM Product. Buyer holds the right to access to solar panels related to the OEM Product. Seller shall maintain high quality standards of manufacturing process and high quality of products to be produced for the OEM, and shall perform 100% testing of raw materials, ingots, wafers, solar cells and solar modules at the end of production of each item, and provide a detailed production report in English to Buyer within 3 days before the Delivery Confirmation Letter. Upon execution of the Delivery Confirmation Letter, Buyer shall inspect the delivered OEM Product immediately for any physical or apparent damage. Buyer shall notify Seller in writing of any physical or apparent damage or possible technical or operational damaged to the OEM Product that renders the OEM Product non-functional within 5 business days of the Delivery Date; otherwise, Buyer shall be deemed to have inspected and found the delivered OEM Product free of any damage.

 

6. Breach Liability

Buyer shall warrants that it holds good commercial reputation and is in good financial condition, failing of which Buyer shall be fully responsible and compensate Seller’s loss therein provided that Seller cannot obtain any loan and insurance policy due to Buyer’s such failure.

 

7. Confidentiality

Both Parties agree to maintain confidentiality concerning the details of this Agreement, except in the event where a disclosure: (i) is necessary for each Party to the financial institutions for the purpose of financing the Agreement; (ii) is required by applicable law either of each Party’s country; (iii) is required by court order or by stock and security regulatory authorities. The Parties shall make provisions that employees and third Parties entrusted with implementing the Agreement are bound to this obligation of secrecy. This also applies to the presentation of this Agreement for legal examinations or audits by legal consultants and tax advisors, investors and banks.

 

6


8. Arbitration

All disputes arising from the execution or in connection with this contract shall be settled through friendly negotiation. If no settlement can be achieved, the parties shall appeal to the International Chamber of Commerce (ICC) for arbitration. The decision of ICC is binding for both parties. The Arbitration place shall be Munich, Germany. In addition, the Arbitration language shall be English. The verdict thereof shall be final and binding to both Parties. The Arbitration fee shall be born by the losing Party.

 

9. Force Majeure

No party shall be held responsible for failure of delay to perform all or any part of the contract due to Force Majeure condition, including flood, fire, earthquake, drought, war or any other events, which could not be predicted at the time of the conclusion of the contract, and could not be controlled, avoided or overcome by any party. However, the party affected by the event of Force Majeure shall inform the other Party of its occurrence in written as soon as possible and thereafter send a certificate of the event issued by the relevant authority to the other party but no later than 15 days after its occurrence. If the event of Force Majeure last over 90 days, the relevant parties shall negotiate the performance or the termination of the contract.

 

10. Miscellaneous

 

10.1 This Contract contains the complete agreement between the Parties with respect to the subject matter hereof and supersedes any prior understandings, agreements or representations by or between the Parties, written or oral, which may have related to the subject matter hereof in any way.

 

10.2 The terms of this Contract may not be amended or waived except in writing executed by the party against which such amendment or waiver is sought to be enforced.

 

10.3 If any provision of this Contract is determined to be invalid, the validity of the remainder of this Contract shall remain unaffected. The parties agree to replace, to the extent possible, any invalid Provision with a valid Provision that comes as close as possible to the parties original economic intent.

 

10.4 This Contract shall be governed by and interpreted in accordance with the laws of Germany. Questions which are not expressly settled therein are to be settled in conformity with the laws of Germany.

 

10.5 Both Parties herewith confirm the receipt of a copy of this Contract executed by both parties.

 

10.6 This Contract is prepared in two copies only (English Language).

 

10.7 The Seller will secure that no third party visitor will have access to the Seller’s production site when products of the Buyer are in production. Furthermore the Seller will not grant any third party visitor access to the stock with “Buyer’s products” at the Seller’s production site.

 

7


11. Attachments

Appendix I:     Product Specification

Appendix II:    Limited Warranty

Supplier Specification

 

Germany:      China:
Mage Solar GmbH      Jinko Solar Import Export Co., Ltd.

/s/ Uwe Hesmert

    

/s/ Kangping Chen

(Director for Purchasing)      (CEO)

 

8


Annex I (Technical Specification)

1. Specifications:

2. Performance tolerance:

3. Product guarantee:

4. Junction Box:

5. Cables:

6. MAGE Powertec PLUS label:

7. Cells:

8. Series No.:

9. Frames:

10. Frames – mounting holes:

11. Glass:

12. Size

 

9


Appendix II (Warranty)

 

1. Guarantee for PV-Modules

a. Scale of the guarantee for PV-Modules

 

  1. First, the PV-Module is produced according to each certificate that was shown.

 

  2. Second, one PV-Module includes frame, glass, cells, cables, junction box and film. If any element shows defect within **** months after order, which are caused by the raw material or production, the guarantee is coming into effect.

The guarantee doesn’t contain the failures, which are caused by production modification without any permission, incorrect handling, incorrect construction, installation, transportation or other outside forces.

The guarantee begins when the product arrives at the stock of the buyer. The Buyer will provide a monthly overview for the Seller showing when the containers arrived at the Buyers warehouse. The exchanged PV-Modules are automatically covered by guarantee for further **** months.

b. The Service of the guarantee for PV-Modules:

After report, the Seller will change or repair the PV-Modules without any delay for free.

 

2. Guarantee for Power across the whole Europe

The power of all PV-Modules will stay at min. 90% of flashing testing power, after the PV- Modules leave the factory for **** years.

The power of all PV-Modules will stay at min. 80% of flashing testing power, after the PV-Modules leave the factory for****years.

If the power falls down more than 10% within the **** years or the power falls down more than 20% within **** years, the Seller will exchange or repair the respective solar modules. The power of the new PV-Modules is automatically guaranteed for further ****years (90%) and **** years (80%).

The lost power, which is caused by false construction, installation, operating error or other outside forces, will NOT be guaranteed.

 

3. Exclusion of both guarantees:

The above mentioned guarantees will be invalid, if the following was to happen:

 

   

False construction, which causes errors of PV-Modules and lost power

 

   

False installation, which causes errors of PV-Modules and lost power

 

   

Incorrect elements or system configuration

 

   

Incorrect operation or operation NOT under product conditions

 

   

NOT allowed repair or switch, by NOT professional workers

 

   

The system lying in a bad area: less irradiation or dirt on the front glass

 

   

Natural disaster, such as: hurricane, earthquake, which can’t be controlled

 

   

Accidents caused: damaged or stolen by persons, damaged by traffic.

 

**** Confidential material omitted and filed separately with the Commission.

 

10


4. The process of both guarantees

In any case, a detailed description of the problem and a copy of invoice, which includes the product name, product number and order data, are collected by the Buyer. After receiving all documents, the Seller finishes the remaining tasks according to both guarantees.

 

11

Purchase Agreement between Arcman Solar Power Corp.

Exhibit 10.61

PURCHASE AGREEMENT

between

Arcman Solar Power Corp.

with its address at P.O.Box 692204, Quincy, MA 02269, USA

and

Shangrao Jinko Solar Import and Export Co., Ltd.

with its address at Xuri District, Shangrao Economic

Development Zone, Jiangxi Province, P.R. China

concluded on April 10th, 2010

 

1


The Parties

Shangrao Jinko Solar Import and Export Co., Ltd.

with its address at Xuri District, Shangrao Economic Development Zone, Jiangxi Province, P.R. CHINA

(hereinafter the “Seller”)

and

Arcman Solar Power Corp.

with its address at P.O.Box 692204, Quincy, MA 02269, USA

(hereinafter the “Purchaser”)

(the Seller and the Purchaser hereinafter collectively referred to as the “Parties”)

PREAMBLE

 

(A) The Seller is an authorized global distributor of Jinko Solar Co. Ltd. With it’s address at Xuri District, Shangrao Economic Development Zone, Jiangxi Province, P.R. CHINA (hereinafter referred to as “Jinko”) and is in the position, under the terms and conditions of this agreement, to deliver the following JINKO photovoltaic (PV) modules to the Purchaser:

Poly-crystalline solar panels of type ****, **** and ****, with the dimensions of **** mm and an Maximum Power at STC (Pmax) output of ****W, ****W and ****W respectively, with the output of **** W representing at least ****% of all aforementioned modules and with no more than ****% of these modules shall have Pmax output between ****W and ****W (hereinafter the “Solar Panel(s)”). The detailed specification of the Solar Panel is set forth in Appendix No.1 to this Agreement.

 

(B) The Purchaser wishes to acquire the Solar Panels from the Seller.

Article I

Subject Matter

Under this agreement, the Seller undertakes to supply to the Purchaser and the Purchaser undertakes to purchase from the Seller, on the basis of the particular orders of the Purchaser and under the terms and conditions set forth herein, in the period from April 1st 2010 to September 30th 2010 the Solar Panels having the aggregate output of 41 MWp. The tolerance of the aggregate output adjustment is plus or minus 5% at the sole discretion of the Purchaser.

The Seller undertakes to supply to the Purchaser **** MWp from the total amount of the above Solar Panels in the second quarter of 2010 on the basis of the particular Orders, as defined below, of the Purchaser.

The Seller undertakes to supply to the Purchaser **** MWp from the total amount of the above Solar Panels in the third quarter of 2010 on the basis of the particular Orders, as defined below, of the Purchaser.

All of the above amounts shall be supplied in compliance with Article III hereof.

 

**** Confidential material omitted and filed separately with the Commission.

 

2


Article II

Purchase Price

 

2.1 The purchase price of the Solar Panels delivered in the second quarter of year 2010 shall be EUR **** (in words ****) per one Watt of the delivered Solar Panels’ output (hereinafter the “Purchase Price”).

 

2.2 The purchase price of the Solar Panels to be delivered in the third quarter of year 2010 and fourth quarter of year 2010 shall be EUR **** (in words ****) per one Watt of the delivered Solar Panels’ output (hereinafter the “Purchase Price”).

 

2.3 The Purchase Price of the Solar Panels delivered in any Individual Delivery according to each single Order of the Purchaser shall be paid as follows:

 

  (i) ****% (in words: ****) of the Purchase Price shall be paid by bank transfer to the Seller’s account specified in Appendix No.2 (hereinafter the “Seller’s Account”) two (2) working days as of the day when the Order is placed with the Seller and the exact Date of Delivery, as defined below, of the precise moment of the Individual Delivery is confirmed to the Purchaser as stipulated in Article 3.2; in the event that the precise moment of the Individual Delivery is not confirmed in compliance with Article 3.2 by the Seller, the ****% of the Purchase Price shall be paid by the Purchaser along with the ****% of the Purchase Price in time set out in letter (ii) below;

 

  (ii) ****% (in words: ****) of the Purchase Price shall be paid to the Seller’s Account under the transferrable letter of credit (the “Letter of Credit”) opened in favour of the Seller as the beneficiary seven days as of the day when the Order is placed with the Seller and the exact Date of Delivery, as defined below, of the precise moment of the Individual Delivery is confirmed to the Purchaser as stipulated in Article 3.2. The Letter of Credit will be irrevocable for 60 days, payable 45 days after the Individual Delivery was delivered to the Place of Delivery under the Incoterms 2000 F.O.B, upon presentation of the following documents to the Purchaser’s bank provided that the delivery in respect to the Individual Delivery is performed in accordance with Article 3.7 hereof,:

 

   

the Bill of Lading (i.e. the original of the Bill of Lading);

Bill of Lading is for the purposes of this Purchase Agreement defined as the full set of original clean on board multimodal transport bill of lading regarding the relevant Individual Delivery of Solar Panels being supplied by the Seller to the Purchaser made out to order of the Purchaser (and issued by the carrier and provided to the Purchaser or a company designated by the Purchaser in compliance with the Order), mentioning as the consignee the full name and address (and other details as may be requested by the Purchaser in the relevant Order) of the Purchaser or person determined so by the Purchaser in the Order, marked “freight payable at destination/freight collect” and allowing the Purchaser or such person (or a person to whom the bill of lading is transferred) to receive the Solar Panels without any further conditions upon the presentation of the bill of lading (the “Bill of Lading”)

 

   

all the documents listed in Article 3.7 (ii) (first two paragraphs) hereof;

 

2.4 The Purchase Price includes any and all costs of the Seller under the Incoterms 2000 F.O.B term (port of Shanghai, People’s Republic of China) relating to the delivery of the Solar Panels to the Place of Delivery, including, but not limited to, costs of packaging, carriage and insurance and costs relating to the performance of all obligations of the Seller hereunder.

 

2.5 The Parties expressly agree that the Purchaser is allowed to set off any claims of the Purchaser arising in connection with the breach of the obligations of the Seller against the Purchase Price.

 

**** Confidential material omitted and filed separately with the Commission.

 

3


2.6 The Purchaser shall be responsible for any transportation charges, insurance, import duties, taxes or other costs that may be assessed on or incurred by the Purchaser in connection with importing the Solar Panels from Place of Delivery under the Incoterms 2000 F.O.B term (port of Shanghai, People’s Republic of China).

 

2.7 Purchaser shall send Advance Payment of Euro **** of which First Part or Euro **** (in words: **** Euros) shall be sent by bank transfer to Seller’s Account within two (2) working days as of the day when this Purchase Contract is signed and Second Part or Euro **** (in words: **** Euros) shall be sent by bank transfer to Seller’s Account no later than by May 3rd, 2010. In the event the Purchaser, without valid cause, terminates this contract and does not place Orders in the third quarter of year 2010 for agreed Individual Deliveries and does not pay for them according to the terms of this contract, the Seller is entitled to hold the Advance Payment of Euro ****. In all other events the Purchaser is entitled to instruct the Seller how to use the Advance Payment towards the Purchase Price of the Order of the last Individual Delivery.

 

2.8 The Seller shall provide the Purchaser with an irrevocable and unconditional bank guarantee of an internationally recognized bank acceptable to the Purchaser 15 days after receiving the First Part. This bank guarantee will only be effective upon receiving Second Part and shall be valid and available to the Purchaser until 31.10.2010. This bank guarantee shall state that the bank shall pay the Purchaser upon the Purchaser’s request, without protest or notification, the amount of Euro ****. If the Seller does not timely and duly provide the Purchaser with the bank guarantee as stipulated above, the Seller is not entitled to receive or hold the Advance Payment of Euro **** and is obliged immediately to refund the Advance Payment, if received, to the Purchaser.

Article III

Solar Panels Delivery

 

3.1 The Seller undertakes to sell and deliver the Solar Panels on a F.O.B. basis at the port of Shanghai, People’s Republic of China (hereinafter referred to as the “Place of Delivery”). “F.O.B” means “Free on Board” as defined by Incoterms 2000 (International Rules for Interpretation of Trade Terms, as published by the International Chamber of Commerce, edition 2000) as may be amended from time to time.

Should any specific provision of this agreement conflict with the terms contained in the Incoterms 2000 definition, then the specific provision prevails.

 

3.2 The Seller undertakes to deliver the Solar Panels to the Place of Delivery according to each single order placed by the Purchaser pursuant to this Article 3 (hereinafter referred to as the “Order”) in individual deliveries performed in compliance with this Agreement (hereinafter referred to as the “Individual Deliveries” and each of such deliveries the “Individual Delivery”).

The Purchaser shall specify in the Order information and request regarding the Individual Delivery in the extent which it considers necessary. The Purchaser is obliged to specify in the Order (a) the amount of requested Solar Panels, (b) the Purchase Price and (c) the date of delivery determined in compliance with Article 3.4 or Article 3.5.

The Seller undertakes to confirm to the Purchaser in writing via e-mail or fax the date of the Individual Delivery (hereinafter the “Date of Delivery”) no later than 14 business days in advance provided that the Date of Delivery may vary from the date of delivery specified by the Purchaser in the Order by no more than [2] calendar days. Such confirmation does not affect an obligation of the Seller to supply the Individual Delivery as at the date of the delivery requested by the Purchaser in the Order.

 

 

**** Confidential material omitted and filed separately with the Commission.

 

4


The Seller shall be entitled, provided that it informs so the Purchaser in the confirmation pursuant to the previous paragraph of this Article 3.2, to decrease the amount of shipped Solar Panels (i.e. the total output of Solar Panels) to be delivered under each Individual Delivery set out in the Order by up to 25% compared to the respective Order (hereinafter referred to as the “Lowered Order(s)” or, respectively, as the “Lowered Deliveries” and each of such deliveries the “Lowered Delivery”), i.e. o delay shipment of such amount of Solar Panels (see 3.3.below).

In the event that the Seller exercises its right to the Lowered Delivery, it shall be obliged, without any further notice being made by the Purchaser, to supply the Purchaser, no later than upon the Dare of Delivery of the Individual Delivery which is due to be made on the basis of the 4th Order directly following the Lowered Order, with the Solar Panels remaining undelivered under the Lowered Order. For the avoidance of doubt, no portion of the Purchase Price for the Solar Panels remaining undelivered under the Lowered Order is payable at the time of maturity of the Purchase Price for the Lowered Delivery.

 

3.3 All Orders placed by the Purchaser at the Seller between signing this Agreement and October 31, 2010 for the supply of Solar Panels up to the aggregate total output of 41 MWp are considered to be automatically accepted by the Seller and the Seller is obliged to deliver the Solar Panels in Individual Deliveries according to the Orders of the Purchaser to the Place of Delivery.

 

3.4 The schedule of contemplated deliveries attached in Appendix No. 4 hereto provides for dates on which the Orders of the Purchaser may be placed at the Seller according to Article 3.2.

Notwithstanding any contemplated dates of deliveries set out in Appendix No. 4, if the Seller receives an Order in compliance with Article 3.3 (hereinafter the “Planned Order”), the Seller shall deliver the Solar Panels on the date of delivery requested by the Purchaser in the Order which shall not be less than 14 days as from placing the Order by the Purchaser.

 

3.5 The amount of Solar Panels which the Purchaser may request in addition to the obligation of the Seller under Article 3.3 shall be delivered on the date of delivery requested by the Purchaser in the Order; such date of delivery shall, however, not be less than 30 days as from placing the Order by the Purchaser. For the avoidance of doubt, this Article 3.5 shall not apply to Planned Orders.

 

3.6 The Orders can be placed by email, fax or in writing.

 

3.7 Delivery with respect to an Individual Delivery shall mean (i) loading of the ordered Solar Panels complying fully with the specification of the Solar Panels in Appendix No. 1 on board of the vessel as specified by the Purchaser under the F.O.B term at the Place of Delivery; and (ii) handover of all relevant documents relating to the Individual Delivery of the Solar Panels to the person as instructed by the Purchaser.

The documents under the point (ii) shall mean the Bill of Lading and all documents requested by the Purchaser which allow him to handle with Solar Panels, deliver them in the Czech Republic and use them in compliance with its purpose; such documents shall include, in particular, without limitation:

 

   

Duly drawn invoice – 3 originals and 3 copies (example in Appendix 7);

 

   

Packing Bill or Packing List (example in Appendix 5);

 

   

Insurance policy for at least the full value of the relevant Individual Delivery covering all risks of loss or damage (i.e. in particular theft, accident, fire, earthquake, explosion, war, natural disaster etc.) up to the rail of the vessel at the Place of Delivery and entitling the Purchaser to insurance benefits as a result of the insured event;

 

   

The output report, which shall include the identification of individual pieces of Solar Panels, which form the Individual Delivery, including electric output (flash test) of any such piece as per (example in Appendix 6);

 

5


   

If requested by the Purchaser, certificate of origin regarding the Solar Panels.

Should the Solar Panels handed over at the Place of Delivery not fully comply with the specification of the Solar Panels in Appendix No. 1, handover of such Solar Panels shall not be deemed as meeting the obligation of the Seller to deliver the Solar Panels under this agreement; the same applies to missing or faulty documents specified above in this Article 3.7.

Without prejudice to the liabilities and responsibilities of the Seller arising from the F.O.B. term, the Seller shall: (i) ensure proper and timely loading of the ordered Solar Panels on board of the vessel in the port of Shanghai as instructed by the Purchaser, (ii) use the carrier designated by the Purchaser for transportation of the Solar Panels from the Jinko Warehouse to the port of Shanghai, (iii) ensure proper packaging of the Solar Panels and their loading on the means of transportation at the Jinko Warehouse according to instruction of the Purchaser, its representative or, in their absence, of the carrier. All costs associated with the above obligations of the Seller shall be borne solely by the Seller.

 

3.8 The inspection of the Solar Panels included in each Individual Delivery shall be effected at Jinko Warehouse at Shangrao City, Jiangxi Province, China 214028 (“Jinko Warehouse”).

The Seller shall ensure that:

 

  (a) the Purchaser (or any person(s) authorized by the Purchaser) has the opportunity and sufficient time to properly inspect all the Solar Panels included in each Individual Delivery at the Jinko Warehouse in the extent requested by the Purchaser (or such authorized person);

 

  (b) the Purchaser is properly notified at least 3 business days in advance on the day(s) on which the inspection shall take place;

 

  (c) the Purchaser is allowed to inspect all technical, delivery, shipping, packaging and other documents and reports (including output reports) relating to the Solar Panels included in each Individual Delivery and make copies of them as well as take photos of all Individual Deliveries (i.e. the Solar Panels, containers, means of transportation etc.) as the Purchaser requests.

 

3.9 The Purchaser has the right to refuse delivery of any Solar Panels included in any Individual Delivery if (a) the Seller does not meet its obligations under Article 3.8 or (b) the Solar Panels inspected and or the documents relating to the Solar panels do not, in view of the Purchaser, fully comply with the specification of the Solar Panels in Appendix No. 1 hereto and/or with the particular Order of the Purchaser and/or with this agreement or (c) any defect or malfunction of the Solar Panels or the related documents has been identified. Should the Purchaser refuse delivery of any Solar Panels under this Article 3.9, the Seller shall instantly ensure delivery of substitute Solar Panels. The Purchaser has the rights listed in Article 3.8 in respect of the substitute Solar Panels too.

Not effecting the inspection and/or not refusing delivery of the Solar Panels at Jinko Warehouse as stated above in Articles 3.8 and 3.9 shall be without prejudice to any rights of the Purchaser arising from Defects of the Solar Panels and/or any other rights of the Purchaser under this agreement (including, but not limited to, the compensation of damages).

For the avoidance of doubt the parties hereby agree that (i) the Purchaser is not obliged to carry out any inspection under this Agreement, (ii) no control of the Solar Panels by the Purchaser under this Agreement, signature of any documents by the Purchaser (including any Bill of Delivery, delivery notes, etc.) shall constitute acceptance of the Solar Panels, and (iii) any acceptance of the delivered Solar Panels shall not remove the Seller’s responsibility for any defects hereunder.

 

3.10 The risk of damage to the Solar Panels shall pass from the Seller to the Purchaser pursuant to the F.O.B term as stipulated in Article 2.1. The ownership title to the Solar Panels in relation to the Individual Delivery shall pass from the Seller to the Purchaser along with the risk of damage by the delivery of the Solar Panels to the vessel in Shanghai determined by the Purchaser, provided, however, that a hand-over (or failure to hand over) of any documents does not affect the ownership title of the Purchaser already obtained by such delivery of Solar Panels, i.e. the provision of Article 3.7 letter (ii) shall not apply in respect to the validity and effectiveness of the transfer of the ownership title to the Solar Panels.

 

6


Article IV Defects

 

4.1 The Seller shall be obliged to deliver the Solar Panels in the amount, quality and form compliant with this Agreement and its Appendix No. 1. It is essential that the Solar Panels have no factual or legal defects, hold precisely the promised features, fully comply with the specifications set out in Appendix No. 1 hereof, and that the Solar Panels shall be manufactured solely and exclusively by Jinko. The Seller hereby specifically declares and warrants to the Purchaser that the Panels are of a perfect quality without any defects or any decreased quality level of Jinko solar panels and explicitly do not fall within the Grade A and/or Grade B level mentioned in the Jinko Warranty.

 

4.2 On inspection of the Solar Panels by the Purchaser at places of their installation in the Czech Republic, if any of the Solar Panels are discovered to contain a defect, be damaged or otherwise not compliant with Appendix No. 1 hereof, including, without limitation, where the Solar Panels have been manufactured by an entity other than Jinko (each referred to as ¡°Defects¡±), the Seller shall be deemed to be in breach of this Agreement and the Purchaser shall have claims and remedies set out in Article 4.4 and 4.5 , without limitation to any other claims and remedies available to the Purchaser. .

 

4.3 The Purchaser shall be obliged to notify the Seller in writing about any Defects without undue delay after having identified them. Since the Solar Panels are delivered packed, the Parties hereby agree to notify manifest Defects within a period of sixty (60) days after the day when the respective Solar Panels arrived in their place of installation in the Czech Republic, such period Parties hold as a reasonable time for the inspection of Solar Panels being the part of the Individual Delivery and for the identification of any manifest Defects of the Solar Panels.

 

4.4 The Purchaser shall have the following claims arising from Defects:

 

  (i) the Purchaser shall be entitled to delivery of any Solar Panels which have not been delivered on time in accordance with Article 3.2 hereof (hereinafter “Missing Solar Panels”); and

 

  (ii) If the Missing Solar Panels are not delivered within the additional 14-day period, the Purchaser shall be entitled to request payment of liquidated damages amounting to ten per cent (10%) of the Purchase Price of the Missing Solar Panels for each day of delay exceeding the additional 14-day time period; and

 

  (iii) in case a failure to deliver exceeds 10% of the number of Solar Panels which should have been delivered in accordance with Article 3.2 hereof, the Purchaser shall be entitled to claim the liquidated damages amounting to twenty per cent (20%) of the Purchase Price of the Missing Solar Panels; the right to claim liquidated damages under this let. (iii) and under let. (ii) above shall be without prejudice to the right of the Purchaser to delivery of the Missing Solar Panels.

The Seller shall be obliged to pay the liquidated damages set forth in this paragraph within fourteen (14) days after the delivery of the Purchaser’s request. Payment of a contractual penalty under this provision shall not affect the Purchaser’s right to claim damages in the full amount and an obligation of the Seller to deliver the respective Solar Panels.

 

4.4a As regards delivery of any Missing Solar Panels, i.e. Solar Panels which have not been delivered on time in accordance with Article 3.2, the Purchaser shall be entitled (but not obliged) to transport such Missing Solar Panels to the Czech Republic by train instead of by sea as stipulated in Article 3.1. Should the Purchaser decide to transport the Missing Solar Panels in this manner, the Seller shall, at its own costs, comply with all instructions of the Purchaser as regards transportation of the Missing Solar Panels by train (in particular as regards delivery of the Solar Panels to the place of loading on train in the People’s Republic of China) and provide the Purchaser with all requested cooperation.

 

7


The Seller shall compensate the Purchaser for all costs (i.e. charges, fees, customs and other payments of whatsoever nature) incurred by the Purchaser in connection with transportation of the Missing Solar Panels by train exceeding the amount of costs which would the Purchaser have incurred if the transportation of the Missing Solar Panels had been by sea as stipulated in Article 3.1. This compensation shall be paid by the Seller to the Purchaser within fourteen (14) days after the delivery of the Purchaser’s request for payment.

The Purchase Price of the Missing Solar Panels shall be paid as stipulated in Article 2.3 with the exception that the Rail Way Bill shall be used instead of the Bill of Lading; in the Rail Way Bill the name and address of the Purchaser or the entity designated by the Purchaser shall be stated as the name and address of the consignee (hereinafter the “Rail Way Bill”).

If (a) the Missing Solar Panels being delivered by train pursuant this Article 4.4a arrive in the Czech Republic no later than as if they had arrived if shipped by sea as stipulated in Article 3.1 and (b) the Seller duly and timely compensated the Purchaser for the costs of transportation as stipulated in this Article 4.4a above, the Purchaser shall not have the right to claim the liquidated damages as stipulated under Article 4.4 hereof.

 

4.5 Further, the Parties hereby agree the following procedures with respect to any Defects of Solar Panels (however, if there are any discrepancies between this Art. 4.5 and the Jinko Warranty in Appendix No. 3, then the terms of this agreement shall prevail).

 

  (i) Solar Panels prior to installation, 0-120 days

In case of technical problems with Solar Panel(s) prior to installation within one hundred twenty days from the relevant date of delivery of Solar Panels to the Purchaser, the Seller will replace the faulty Solar Panels at its own costs, within sixty days of the Purchaser’s written notification to the Seller under Art. 4.3.

 

  (ii) Installed Solar Panels

If the Solar Panel(s) malfunction or generate less than the indicated amount of power, the Purchaser shall inform the Seller and provide him with the measurement details of the Solar Panel(s). In the event that the defects are identified to be caused by the Seller or its affiliates pursuant to Article 4.5 (iii) hereunder, the Seller is obliged to replace such defective Solar Panels or, if so requested by the Purchaser, to credit the original Purchase Price of such defective Solar Panels and cover the costs of transportation plus installation costs of 50 EUR per kWp within thirty days of such event.

 

  (iii) Measurement

In the event the Seller does not agree and/or accept Purchaser’s measurements and conclusion with respect to the defective Solar Panels, the Seller has a right to call for its own measurement within 15 days after the receipt of the measurement details from the Purchaser. If both results differ and the Seller’s measurement would result in there being no warranty claim, a first-class international test-institute such as Fraunhofer ISE in Freiburg/ Germany, TÜV Rheinland in Cologne/ Germany or ASU Arizona State University shall resolve the dispute.

 

8


Article V

Term and Termination

 

5.1 This Agreement shall become valid and effective as of the date of its execution by both Parties and shall terminate as of October 31, 2010 (the “Term”), unless terminated earlier pursuant to the terms and conditions hereof.

 

5.2 The Purchaser shall be entitled to terminate this Agreement in the following cases:

 

  (i) in the case of a material breach of this Agreement by the Seller; a material breach shall include, but not be limited to, the following:

 

  (a) the Seller delay the fulfilment of its obligation to duly and timely deliver any individual Delivery hereunder by more than one (1) week;

 

  (b) the Seller delay the fulfilment of any of its obligations hereunder by more than two (2) weeks;

 

  (c) the Solar Panels delivered in any Individual Delivery are not compliant with Article 4.1;

 

  (ii) in other cases specified in this Agreement.

 

5.3 The Seller shall be entitled to claim for liquidated damages or terminate this Agreement at its sole discretion in the following cases:

 

  (i) if the Purchaser delays payment of the Purchase Price set forth in Article 2.2 hereof by more than fifteen (15) days and fails to pay the Purchase Price within the additional period of one (1) week after receiving Seller’s request for payment of the Purchase Price, the Seller shall have the right to: either (a) claim for a liquidated damages at a rate of 0.01% of delayed payment for each calendar day up to 5%; or (b) terminate the Agreement;

 

  (ii) if the Purchaser delays taking delivery of the Solar Panels delivered by the Seller in full compliance with this Agreement by more than thirty (30) days and fails to take delivery of the Solar Panels despite the Seller request within an additional period of eight (8) weeks, all the expenses including warehouse fee, safekeeping fee incurred shall be borne by the Purchaser.

 

  (iii) if the Purchaser, without valid cause, terminates the contract prior to any Solar Panels Delivery set forth in Article III, the Seller shall have the right to claim a liquidated damage at a rate of 10% of the total contract value and to refuse returning the Advance Payment back to Purchaser.

 

5.4 Either Party may terminate this Agreement forthwith upon written notice to the other Party if the other Party enters into a composition or arrangement with its creditors, has a receiver or administrator or administrative receiver appointed or becomes insolvent or unable to pay its debts should such fall due. The Purchaser may also terminate this Agreement forthwith upon written notice to the Seller if the Jinko enters into a composition or arrangement with its creditors, has a receiver or administrator or administrative receiver appointed or becomes insolvent or unable to pay its debts should such fall due.

 

5.5 Termination of this Agreement shall be without prejudice to the rights and obligations of either Party accrued prior to the termination of this Agreement. In particular, unless requested otherwise by the Purchaser, the Seller shall be obliged to deliver the Solar Panels ordered by the Purchaser in compliance with this Agreement prior to its termination.

 

5.6 Based on the requirement of Seller’s commercial strategy, Purchaser warrants that it shall not resell Seller’s Solar Panels into the country of Israel, failing of which Purchaser shall be fully responsible for all of loss of Seller.

 

9


5.7 Purchaser warrants that it holds good commercial reputation and is in good financial condition, failing of which Purchaser shall be fully responsible and compensate Seller’s loss therein provided that Seller cannot obtain any loan and insurance policy due to Purchaser’s such failure.

Article VI

Quality Guarantee

 

6.1 The Seller shall ensure that Jinko shall provide the Purchaser with the warranty in the form of, and the content of, Warranty Terms 2010 ¨C Limited Warranty for PV Modules attached hereto as Appendix 3 in respect to each Individual Delivery, provided that the modifications specified in Article VI.2 hereof shall apply. Provision of such warranty shall be a condition precedent to execution by the Purchaser of payments set out in Article 2.3 letters (ii) and (iii).

 

6.2 The following modifications from the wording of the Terms 2010 Limited Warranty for PV Modules attached in Appendix 3 shall apply:

 

  6.2.1 the governing law of the Warranty shall be the law of England and Wales;

 

  6.2.2 Nothing in clause 7 of the Warranty Terms 2010 Limited Warranty for PV Modules attached in Annex 1 shall exclude and/or restrict the right of the Project Company to resolve any respective dispute regarding its claim(s) under the Warranty (regardless of whether such claims exist or not) in accordance with Clause 12 hereof; and

 

  6.2.3 Clause 3.(5) of Warranty Terms 2010 Limited Warranty for PV Modules attached in Annex 1, shall not apply.

 

6.3 The Seller warrants (as at the delivery of the Individual Delivery) to the Purchaser in respect of each Individual Delivery to the extent and under the terms and conditions as set out in the foregoing Jinko warranty (specified in Articles 6.1 and 6.2 above and 6.6 below) as if the Seller were Jinko. This does not affect the rights of the Purchaser related to Defects and other rights under Article IV.

 

6.4 With the exception of rights of the Purchaser arising under the Jinko warranties (specified in Articles 6.1 and 6.2 above), neither Party shall be liable to the other Party for any consequential, incidental, indirect, special, exemplary or punitive damages (including loss of actual or anticipated profits, revenues or product; loss by reason of shutdown or non-operation; increased expense of operation, borrowing or financing; loss of use or productivity; and increased cost of capital) exceeding the amount of 100 % of the total amount of the purchase price for all Individual Deliveries arising hereof, regardless of whether any such claim arises out of the breach of contract, guaranty or warranty, tort, product liability, indemnity, contribution, strict liability or any other legal theory.

 

6.5 At the request of the Purchaser, the Seller shall provide the Purchaser maximum cooperation in Purchaser’s negotiation with Jinko on amending the Jinko warranty according to requirements of the Purchaser.

 

6.6 The Seller shall ensure that nothing in clause 7 of the Warranty Terms 2010 Limited Warranty for PV Modules provided by Jinko and, respectively, pursuant to Article 6.2 hereof, by the Seller, in respect of each Individual Delivery, as attached in Appendix 3 hereto, shall exclude and/or restrict the right of the Purchaser or the entity which acquired the Solar Panels to resolve any respective dispute regarding claim(s) under the said warranty (regardless of whether such claims exist or not) in accordance with Clause 10.2 hereof.

 

10


Article VII

Force Majeure

 

7.1 Neither party shall be liable for any delay or failure to fulfil their obligations hereunder (without liability to the other party) if it is prevented from or delayed in the carrying on of its business due to circumstances beyond its reasonable control including, without limitation, acts of God, war or national emergency, acts of terrorism, protests, riot, civil commotion, fire, explosion, flood or epidemic (an “Event of Force Majeure”), provided that if an Event of Force Majeure continues for a period exceeding ninety (90) calendar days, the Parties shall be obliged to fulfil their obligations arising from this Agreement as soon as the Event of Force Majeure effects cease to apply. The Parties shall be obliged to postpone the date of delivery as well as any other terms and deadlines for the period after an Event of Force Majeure ceases to apply. If an Event of Force Majeure continues for a period exceeding one hundred eighty (180) calendar days, the Purchaser shall be entitled to terminate this Agreement by written notice delivered to the Seller. Delayed supplies from sub-contractors (including Jinko as the producer of the Solar Panels), various lockouts, strikes and government changes cannot be classified as an Event of Force Majeure.

Article VIII

Confidentiality

 

8.1 The Parties hereby undertake to keep confidential and not disclose to any third party, other than to its professional advisers or as required by law, by decisions of courts, state or similar authorities or as agreed between the Parties, any financial or confidential information relating to the terms of this Agreement or any confidential information relating to the business or affairs of the other Party, including without limitation any and all facts, information, data and circumstances they learn in the course of performing this Agreement and/or in connection herewith.

 

8.2 Art. 8.1 shall not apply to information which:

 

  (i) has become of public knowledge other than through the fault of the disclosing Party;

 

  (ii) the disclosing Party can demonstrate was already known prior to disclosure; or

 

  (iii) has been received by the disclosing Party from a third party who did not acquire it (i) in confidence from another Party or (ii) from someone owing a duty of confidence to another Party.

The obligation of the Purchaser not to disclose information under Art. 8.1 does not apply to disclosing confidential information to customers of the Purchaser and any third parties cooperating with the Purchaser on solar projects of the Purchaser in the Czech Republic, including, but not limited to, their shareholders, affiliates, parent companies, directors, advisors, employees, contractual partners, agents and other representatives.

 

8.3 The undertakings under this Article 8 shall survive the termination of this Agreement.

Article IX

Trademarks

 

9.1 The Purchaser shall only use the Seller’ trademarks (the “Trademarks”) in promoting and selling the Solar Panels and the Purchaser shall comply with the following conditions:

 

  (i) At the request of the Seller, in using any Trademarks, the Purchaser must give due prominence to the fact that the Trademarks are proprietary to (or otherwise connected with) the Seller.

 

  (ii) The Trademarks must not be used in relation to any goods other than the Solar Panels.

 

11


  (iii) The Purchaser shall use the Seller’ names or the Trademarks on any written document, advertisement or in any other printed or electronic materials in accordance with the Seller’ brand guidelines for use of the Trademarks. The Trademarks shall not be used in association with any other trademarks or names under the corporate or other main trading names of the Purchaser without the prior written approval of the Seller.

 

  (iv) The Purchaser shall leave in position and not tamper with, alter, cover or erase any notices or other marks in which the Seller may place on or affix to the Solar Panels.

 

  (v) The Purchaser shall have no rights in respect of the Trademarks or of the goodwill associated therewith and the Purchaser hereby acknowledges that, except as expressly provided, it shall not acquire any rights in respect thereof, and that all such rights and goodwill are, and shall remain vested in the Seller.

 

  (vi) The Purchaser shall promptly notify the Seller of any suspected infringement of the Trademarks.

 

  (vii) The Purchaser shall not, at any time during or at any time after the termination of this Agreement, in connection with any business similar to that of the Seller, adopt, use or register, without the prior written consent of the Seller, any word or symbol or a combination similar to any of the Trademarks.

Article X

Final Provisions

 

10.1 This Agreement shall be governed by and construed in accordance with the laws of England and Wales without regard to conflicts of laws and rules. The Appendices to this Agreement form an integral part of this Agreement.

 

10.2 All disputes and controversies of every kind between the Parties arising out of this Agreement shall be referred to and finally resolved by arbitration under the Rules of the London Court of International Arbitration in accordance with such body’s rules, by three arbitrators appointed in accordance with such rules. All arbitration proceedings shall be conducted in English in London, the United Kingdom. The award rendered shall be final and binding, and shall not be subject to appeal to any court.

 

10.3 The provisions of this Agreement are mutually severable. Should any of the obligations hereunder be or become invalid or unenforceable, it shall not affect the validity and enforceability of the remaining obligations hereunder and the Parties undertake to replace the relevant invalid or unenforceable obligation with a new obligation that is valid and enforceable, and the subject of which corresponds as closely as possible to the subject of the original obligation. Should this Agreement lack any provision or obligation the determination of which would otherwise have been reasonable for the purpose of setting forth the rights and obligations of the Parties, the Parties shall take all steps necessary to supplement such provision into the Agreement.

 

10.4 This Agreement may only be amended, supplemented or cancelled by written amendments numbered in continuous order. These amendments must be identified as such, must be validly signed by all Parties and shall be governed by the same contractual laws as the Agreement itself. If one of the Parties submits a draft amendment, the other Parties undertake to express their opinion on the draft within fourteen (14) calendar days of the delivery of the draft.

 

10.5 The Seller may not assign this agreement or any rights or obligation arising from it to any third party without the prior written consent of the Purchaser. The Purchaser shall be entitled to assign this Agreement in its entirety, i.e. all rights and obligations arising from this Agreement for the Purchaser, to any third party and the Seller explicitly and irrevocably consents to such an assignment (including assignment of all obligation of the Purchaser in such a case).

 

12


10.6 The terms and provisions of this Agreement may not be waived except in writing signed by the Party against whom the waiver is charged. A waiver by any Party of any breach of any term or provision hereof shall not constitute a waiver of any other breach of any term or provision of this Agreement.

 

10.7 The Parties shall consult with each other as to the form, substance and timing of any press release or other public disclosure related to this Agreement; provided, however, the Parties may make such disclosure to the extent required by applicable law.

 

10.8 This Agreement may be executed in any number of counterparts, each of which when executed and delivered shall be deemed to be an original, but all of the counterparts together shall constitute one and the same instrument. Facsimile executed and delivery of this Agreement is legal, valid and binding for all purposes.

 

10.9 All futures correspondence, notices and other exchange of information in relation to this Agreement shall be in English.

 

10.10 This Agreement shall become valid and effective on the day of its signing by all Parties.

(The below is intentionally left blank for signatures)

 

13


In Shanghai on April 10th of 2010    In Shanghai on April 12th of 2010
on behalf of Shangrao Jinko Solar Import and Export Co., Ltd.    On behalf of Arcman Solar Power Corp.
Signature:    Signature:
/s/ Xisnde Li    /s/ Zi Meng
Name: Xiande Li    Name: Zi Meng
Title: Chairman    Title: Vice President

 

14


Appendices:

 

Appendix No. 1:    Detailed Specification of Solar Panels including CE certificate
Appendix No. 2:    Seller’s bank account number
Appendix No. 3:    Jinko Warranty
Appendix No. 4:    Preliminary Delivery Schedule
Appendix No. 5:    Packing List
Appendix No. 6:    Output/flash report
Appendix No. 7:    Commercial Invoice

 

15


VERIFICATION OF EMC COMPLIANCE

 

No.:

   SHEMO10020015501TXC

Applicant:

   Jinko Solar Co., Ltd
   No 1 Jinko Road, Shangrao Economic Development

Zone,

   Jiangxi Province 334100, China

Manufacture:

   Jinko Solar Co., Ltd
   No 1 Jinko Road, Shangrao Economic Development

Zone,

   Jiangxi Province 334100, China

Product Description:

   PV Module

Model No.:

   JKMXXXM-96, JKMXXXM-72, JKMXXXM-66,
   JKMXXXM-60, JKMXXXM-54, JKMXXXM-36,
   JKMXXXP-72, JKMXXXP-60, JKMXXXP-54,
   JKMXXXP-48, JKMXXXP-36 (XXX:0W-300W)

Technical Data:

   Not supplied by client

Sufficient samples of the product have been tested and found to be in conformity with

Test Standard:

   EN 61000-6-1: 2007
   EN 61000-6-3: 2007

As shown in the

  

Test Report Number(s):

   SHEMO10020015501

This verification of EMC Compliance has been granted to the applicant based on the results of the tests, performed by laboratory of SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. on the sample of the above-mentioned product in accordance with the provisions of the relevant specific standards and Directive 2004/108/EC. The affixing of the CE marking presumes in addition that the conditions in annexes III and V of the Directive are fulfilled.

Tino Pan

E&E Section Manager

SGS-CSTC

Feb 25, 2010

 

This verification is owned by SGS-CSTC Standards Technical Services (Shanghai)Co., Ltd. and may not be reproduced full and with the prior approval of the General Manager. This verification is subjected to the governance of the General Conclitions of Services, printed overleaf.

Member of SGS Group (Société Générale de Surveillance)

Contact us to validate this document by email address: ee.shanghai@sgs.com

SGSPAPER

09622658

 

16


JinKo   
LOGO   

**** Watt

 

POLY CRYSTALLINE MODULE

  

 

Jinko Solar introduces all new line of high performance modules in wide application ranging from **** watts to **** watts.

 

KEY FEATURES

 

Our solar cells offer high conversion efficiency to ensure high quality

 

Our High performing modules have an industry low tolerance of +/-3%

 

Can withstand high wind-pressure, snow load and extreme temperature

 

Passed IEC 2400 Pa mechanical loading test

 

QUALITY & SAFETY

 

Industry leading power output warranty (12/90%, 25/80%)

 

5-year warranty on product materials and processing technology

 

ISO 9001:2000 (Quality Management System) certified factory

 

IEC61215, IEC61730 certified products

 

APPLICATIONS

 

On-grid residential roof-tops

 

On-grid commercial/industrial roof-tops

 

Solar power plants

 

Off-grid system

 

Other on-grid applications

 

**** Confidential material omitted and filed separately with the Commission.

 

17


Mode Type    ****    ****    ****    ****    ****
Maximum Power (Pmax)    ****Wp    ****Wp    ****Wp    ****Wp    ****Wp
Maximum Power Voltage (Vmp)    ****V    ****V    ****V    ****V    ****V
Maximum Power Current (Imp)    ****A    ****A    ****A    ****A    ****A
Open-Circuit Voltage(Voc)    ****V    ****V    ****V    ****V    ****V
Short-Circuit Voltage (Isc)    ****A    ****A    ****A    ****A    ****A
No. of Diode          6      
Maximum System Voltage    ****V(UL)/****V(TUV,VDE)DC
Maximum System Voltage          ****A      
Maximum Series Fuse Rating          ****%      
Power Tolerance          ****°C      
Temperature Coefficients of Pmax          ****ºC      
Temperature Coefficients of Voc          ****ºC      
Temperature Coefficients of Isc          ****ºC      
Nominal Operating Cell Temperature (NOCT)          ****ºC      

STC: Irradiance 1000W/m2         Module Temperature 25°C    AM=1.5

 

****   Cell Type    Poly-crystalline ****mm ****inch
  No. of Cells    ****
  Dimensions    ****mm ****inch
  Weight    ****kg (****lbs.)
  Front Glass    ****mm High Transmission LowIron, Tempered Glass
  Frame    Anodized Aluminium
  Junction Box    IP67 rated
  Output Cables    UV/****mm2/Length ****mm
  Packing Configuration    2 pcs/box
  Quantity/Pallet    18 boxes/pallet
  Loading Quantity    180 pcs/20 ft or 360 pcs/40 ft
  ****   

 

**** Confidential material omitted and filed separately with the Commission.

 

18


Shangrao Jinko solar Import and Export Co., LTD

Xuri District, Shangrao Economic Development Zone, Jiangxi Province, China

Proforma Invoice

 

 

 

Date         

Number :

        

Page No.:            1

To:    Amun.Re a.s.    From:   
   Praha 5, Radlická 663/28, Post Code    Shangrao Jinko solar Import and Export Co., LTD
   15000, Czech Republic    Xuri District, Shangrao Economic Development Zone,
      Jiangxi Province, China        Attn:
      Tel: +86-21-31268766 Fax: +86-21-68761115
Shipping Term : FOB Shanghai    Your P.O. No.:
      ****% TT in advance & ****%
Sailing on or about :                    By sea    irrepealable
   Payment Term:        L/C 45 days against B/L COPY
From: Shanghai To: Czech Republic   
   Delivery Date :

 

Description

   Quality (PCS)    Unit Price (USD)    Amount
         US$ 0.00
            

TOTAL

   0       US$ 0.00
              

Bank Information

 

Bank Name    BANK OF CHINA. SHANGRAO BRANCH
Address:    43 SHENGLI ROAD, SHANGRAO, JIANGXI PROVINCE£¬ CHINA
SWIFT:    BKCHCNBJ550
BENEFICIARY’s   
Name:    Shangrao Jinko Solar Import and Export Co., Ltd
BENEFICIARY’s   
Address:    Xuri District, Shangrao Economic Development Zone, Jiangxi Province, China
BENEFICIARY’s   
A/C:    739173935828094038

 

 

Authorised Signature

 

 

**** Confidential material omitted and filed separately with the Commission.

 

19


Warranty Terms 2010

Limited Warranty for PV modules

JINKO Standard PV Module Product Model Names coved under this warranty are ****, **** and ****.

For the standard solar module types listed above, JINKO SOLAR shall WARRANTY its Photovoltaic Solar Modules (MODULES)’s performance starting from the date of sale (SALES DATE) to the first customer installing (for their own use) the MODULES (CUSTOMER) or starting at the latest 12 months after module dispatch from the JINKO SOLAR factory, whichever occurs earlier, (the WARRANTY START DATE)

 

1. Limited Product Warranty ¨C Five Years Repair, Replacement or Refund Remedy

Wuxi Jinko Solar Co., Ltd. (JINKO SOLAR) warrants its Photovoltaic Solar Modules (MODULES) type listed above, including factory-assembled DC connectors and cables, if any, to be free from defect in materials and workmanship under normal application, installation, use and service conditions. If MODULES fail to conform to this warranty, during the period of Sixty (60) months from the WARRANTY START DATE, JINKO SOLAR will, at its option, either repair or replace the product, or refund the then current market price of the MODULES. The repair or replacement or refund remedy shall be the sole and exclusive remedy provided under the “Limited Product Warranty” and shall not extend beyond the period set forth herein. This “Limited Product Warranty” does not warrant a specific power output, which shall be exclusively covered under clause 2 hereinafter (“Limited Peak Power Warranty”).

 

2. Limited Peak Power Warranty – Limited Remedy

5 years

If, for a period of Five (5) years from the Warranty Start Date, any MODULE(s) exhibits a power output less than 95 % of the nominal power as set out in JINKO SOLAR’s product datasheet, provided that such loss in power is due to defects in material or workmanship, JINKO SOLAR will, at its sole option, either (1) replace such loss in power by either, at JINKO SOLAR’S sole option, (a) providing additional MODULES to the CUSTOMER to make up for such loss in power or (b) replacing the defective MODULE(s) or (2) refund the percentage of the cost of the MODULE (as measured by the then current market price of the MODULE) to the CUSTOMER representing the percentage of the power output less than 95% of the nominal power as set out as specified in JINKO SOLAR’s product datasheet.

**** years

If, for a period of **** years from the Warranty Start Date, any MODULE(s) exhibits a power output less than 90 % of the nominal power as set out in JINKO SOLAR’s product datasheet, provided that such loss in power is due to defects in material or workmanship, JINKO SOLAR will, at its sole option, either (1) replace such loss in power by either, at JINKO SOLAR’S sole option, (a) providing additional MODULES to the CUSTOMER to make up for such loss in power or (b) replacing the defective MODULE(s) or (2) refund the percentage of the cost of the MODULE (as measured by the then current market price of the MODULE) to the CUSTOMER representing the percentage of the power output less than 90% of the nominal power as set out as specified in JINKO SOLAR’s product datasheet.

25 years

If, for a period of Twenty-five (25) years from the Warranty Start Date, any MODULE(s) exhibits a power output less than 80% of the nominal power as set out in JINKO SOLAR’s product datasheet, provided that such loss in power is due to defects in material or workmanship, JINKO SOLAR will, at its sole option, either (1) replace such loss in power by either, at JINKO SOLAR’S sole option, (a) providing additional MODULES to the CUSTOMER to make up for such loss in power or (b) replacing the defective MODULE(s) or (2) refund the percentage of the cost of the MODULE (as measured by the then current market price of the MODULE) to the CUSTOMER representing the percentage of the power output less than 80% of the nominal power as set out as specified in JINKO SOLAR’s product datasheet.

 

**** Confidential material omitted and filed separately with the Commission.

 

20


The remedies set forth in this clause 2 shall be the sole and exclusive remedies provided under the “Limited Peak Power Warranty”.

 

3. Exclusions and Limitations

(1) In any event, all warranty claims must be received within the applicable warranty period for this warranty to be effective.

(2) The “Limited Product Warranties” and the “Limited Peak Power Warranties” do not apply to any MODULES which have been subjected to:

 

   

Misuse, abuse, neglect or accident;

 

   

Alteration, improper installation or application;

 

   

Non-observance of JINKO SOLAR’s installation and maintenance instructions;

 

   

Repair or modifications by someone other than an approved service technician of JINKO SOLAR;

 

   

Power failure surges, lightning, flood, fire, accidental breakage or other events outside JINKO SOLAR’ s control.

(3) Both the “Limited Product Warranties” and “Limited Peak Power Warranties” do not cover any costs associated with installation, removal or re-installation of the PV-modules and (except as explicitly set forth in the final paragraph of Section 5) customs clearance or any other costs for return of the MODULES.

(4) Warranty claims will not be honored if the type or serial number of the MODULES have been altered, removed or made illegible.

(5) This “Limited Warranty for PV Modules” does not apply to MODULES marked as “Grade A” or “Grade B’. JINKO SOLAR explicitly refers to their “Limited Warranty for PV Modules marked Grade A”, their “Special Limited Warranty for PV Modules marked Grade B” reflecting these categorized modules.

 

4. Limitation of Warranty Scope

These “Limited Warranties for PV Modules” as set forth herein are expressly in lieu of and exclude all other express or implied warranties, including but not limited to warranties of merchantability and of fitness for particular purpose, use, or application, and all other obligations or liabilities on the part of JINKO SOLAR, unless such other obligations or liabilities are expressly agreed to in writing signed and approved by JINKO SOLAR. JINKO SOLAR shall have no responsibility or liability whatsoever for damage or injury to persons or property, or for other loss or injury resulting from any cause whatsoever arising out of or related to the MODULES, including, without limitation, any defects in the MODULE, or from use or installation. Under no circumstances shall JINKO SOLAR be liable for incidental, consequential or special damages, howsoever caused. Loss of use, loss of profits, loss of production, and loss of revenues are specifically and without limitation excluded. JINKO SOLAR’s aggregate liability, if any, in damages or otherwise, shall not exceed the invoice value as paid by the CUSTOMER, for the single unit of MODULE.

 

5. Obtaining Warranty Performance

If the CUSTOMER has a justified claim covered by this “Limited Warranties for PV Modules”, an immediate notification directly to JINKO SOLAR shall be filed by mailing a registered letter in writing to the address of JINKO SOLAR listed hereunder, or, sending an email letter to the email account of JINKO SOLAR listed hereunder. Together with the notification, the CUSTOMER should enclose the evidence of the claim with the corresponding serial number of the MODULE(s) and the date on which the MODULES have been purchased. A invoice with clear indication of the purchase date, purchase price, module type, stamp or signature of Jinko or its distributors should also be submitted as part of the evidence.

The return of any PV-modules will not be accepted unless prior written authorization has been given by JINKO SOLAR. In connection with both the “Limited Product Warranties” and “Limited Peak Power Warranties”. JINKO SOLAR shall reimburse CUSTOMER for reasonable, customary and documented transportation charges by sea freight for both the return of the MODULES and reshipment of any repaired or replaced MODULES.

 

21


6. Severability

If a part, provision or clause of this “Limited Warranty for PV Modules”, or the application thereof to any person or circumstance, is held invalid, void or unenforceable, such holding shall not affect and shall leave all other parts, provisions, clauses or applications of this “Limited Warranty for PV Modules”, and to this end such other parts, provisions, clauses or applications of this “Limited Warranty for PV Modules” shall be treated as severable.

 

7. Disputes

In case of any discrepancy in a warranty-claim, a first-class international test-institute such as Fraunhofer ISE in Freiburg/ Germany, TÜV Rheinland in Cologne/ Germany or ASU Arizona State University shall be involved to judge the claim finally. All fees and expenses shall be born by the losing party, unless otherwise awarded. The final explanation right shall be borne by JINKO SOLAR.

YOU MAY HAVE SPECIFIC LEGAL RIGHTS OUTSIDE THIS WARRANTY, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. THIS LIMITED WARRANTY DOES NOT AFFECT ANY ADDITIONAL RIGHTS YOU HAVE UNDER LAWS IN YOUR JURISDICTION GOVERNING THE SALE OF CONSUMER GOODS, INCLUDING, WITHOUT LIMITATION, NATIONAL LAWS IMPLEMENTING EC DIRECTIVE 99/44. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE LIMITATIONS OR EXCLUSIONS IN THIS LIMITED WARRANTY STATEMENT MAY NOT APPLY TO YOU.

 

8. Various

The repair or replacement of the MODULES or the supply of additional MODULES, does not cause the beginning of new warranty terms, nor shall the original terms of this “Limited Warranty for PV-Modules” be extended. Any replaced MODULES shall become the property of JINKO SOLAR made for their disposal. JINKO SOLAR has the right to deliver another type ( different in size, color, shape and/or power ) in case JINKO SOLAR discontinued producing the replaced MODULES at the time of the claim.

 

9. Warranty Transfer

This warranty is transferable when the product remains installed in its original installation location.

 

10. Force Majeure

JINKO SOLAR shall not be responsible or liable in any way to the customer or any third-party arising from any non-performance or delay in performance of any terms and conditions of sale, including this “Limited Warranty for PV Modules”, due to acts God, war, riots, strikes, warlike conditions, plague or other epidemics, fire, flood, or any other cause or circumstance beyond the reasonable control of such JINKO. In such cases, performance by JINKO of this Warranty shall be suspended without liability for the period of delay reasonably attributable to such causes.

 

11. Validity

This “Limited Warranty for PV Modules” is valid for all MODULES dispatched from JINKO SOLAR’s factories between 1st January 2010 and 31st December 2010.

“Nominal Power in Datasheet” is the power in Watt peak that a PV-module generates in its Maximum Power Point under STC condition. “STC” are as follows:

(a) light spectrum of AM 1.5, (b) an irradiation of 1000 W per square meters, and (c) a cell temperature of 25 degrees centigrade at right angle irradiation. The measurements are carried out in accordance with IEC 61215 as tested at the connectors or junction box terminals—as applicable—per calibration and testing standards of JINKO SOLAR valid at the date of manufacture of the PV-modules.

 

22


Appendix No. 4;

Preliminary Delivery Schedule of Jinko Panels **** Wp

 

Delivery date to Shanghai port

  

Amun.Re Order in MWp

May ****

   ****

May ****

   ****

May ****

   ****

June ****

   ****

June ****

   ****

June ****

   ****

July ****

   ****

July ****

   ****

July ****

   ****

July ****

   ****

August ****

   ****

August ****

   ****

August ****

   ****

August ****

   ****

 

**** Confidential material omitted and filed separately with the Commission.

 

23


LOGO    JINKO SOLAR CO., LTD.
   1 JINKO ROAD, SHANGRAO ECONOMIC DEVELOPMENT ZONE, JIANGXI PROVINCE, CHINA
   TEL: +86-21-68761209 FAX: +86-21-68761115

PACKING LIST

 

Date :

   9-Oct-2009    Invoice No. :   

Messrs:

   xxxxxxxxxx    P.I.No.:   

Address:

   Frankfurt      

Tel;

        

Fax:

        

 

Description

LOGO

       

Container No.

   Quantity
(PC)
   Net Weight
(KG)
   Gross Weight
(KG)
   No. of
Package
(Pallets)
   MEAS
(CBM)

Poly

Crystalline

Photovoltaic

(PV) Modules

****W

   1    CBHU6109768    504    8914.08    10098.90    1-28    49.148
   2    CBHU1994651    504    8914.08    10098.90    29-56    49.148
   3    TRLU6543717    504    8914.08    10098.90    57-84    49.148
   4    UESU4139749    504    8914.08    10098.90    85-112    49.148
   5    CBHU1924973    504    8914.08    10098.90    113-140    49.148
   6    UESU4189565    504    8914.08    10098.90    141-168    49.148
   7    CBHU1855086    504    8914.08    10098.90    169-196    49.148
   8    CBHU6145488    504    8914.08    10098.90    197-224    49.148
   9    FSCU4622866    504    8914.08    10098.90    225-252    49.148
   10    CBHU1890791    504    8914.08    10098.90    253-280    49.148
                              

TOTAL:

         5040    89140.80    100989.00    280 P/L    491.480

 

  

 

  
   Authorised Signature   

 

**** Confidential material omitted and filed separately with the Commission.

 

24


FLASH REPORT

 

  

Container No.:    Serial No.:   
TYPE: MONO 125 SOLAR CELL    MODULE SIZE: **** MM   

Date: 2010/2/9

           Total Power: **** W             Nominal power: **** W   

Pallet No.

      

S.N.

   Voc(V)    Isc(A)    Pm(W)    Vm(V)    Im(A)    FF(%)  

1

  1    23110020800540200001    45.0898    5.5428    185.5063    36.6442    5.0624    74.23
  2    23110020800540200005    45.0583    5.5478    186.1703    36.418    5.112    74.48
  3    23110020800540200010    45.1367    5.5332    186.3514    36.7208    5.0748    74.62
  4    23110020800540200007    45.1016    5.5089    186.1656    36.1238    5.1535    74.93
  5    23110020800540200011    45.1866    5.6137    187.4837    36.8728    5.0846    73.91
  6    23110020800540200009    45.2119    5.5548    185.9746    36.0583    5.1576    74.05
  7    23110020800540200006    45.0883    5.5142    185.4532    36.0626    5.1425    74.59
  8    23110020800540200002    45.075    5.5157    185.849    36.659    5.0697    74.75
  9    23110020800540200008    45.0857    5.514    185.9199    36.7061    5.0651    74.79
  10    23110020800540200004    45.0602    5.5177    185.7629    36.8736    5.0378    74.72
  11    23110020800540200012    45.1171    5.5339    186.3099    36.9227    5.0459    74.62
  12    23110020800540200003    45.0901    5.5233    185.5909    36.6438    5.0647    74.52

 

Operator:    Audit:

 

**** Confidential material omitted and filed separately with the Commission.

 

25


LOGO

Shangrao Jinko solar Import and Export Co., LTD

Xuri District, Shangrao Economic Development Zone, Jiangxi Province, China

Commercial Invoice

 

Date:   01-May-10     Number:  
      Page No. :   1
To:     From:    

 

Arcman Solar Power Corp.

with its address at P.O.Box 692204, Quincy,

MA 02269, USA

  

Shangrao Jinko solar Import and Export Co., LTD Xuri District,

Shangrao Economic Development Zone,

Jiangxi Province,China            Attn: Vicky Sun

Tel: +86-13764183002 Fax:+86-21-68761115

 

Shipping Te Fob shanghai

 

Sailing on or about : By Sea

 

From: Shanghai To: USA

  

Your P.O. No. :

 

Payment Term : ****%TT in advance; ****% LC 45 against B/L copy

 

Delivery Date

 

    

Description

  

Quantity(PCS)

   Unit Price (EURO)    Amount

****W

   Watt-****pcs cell MULTI Panel    1    ****    #VALUE!
           
           

TOTAL:

      1       #VALUE!

Bank Information

 

Bank Name:    BANK OF CHINA, SHANGRAO BRANCH
Address:    43 SHENGLI ROAD, SHANGRAO, JIANGXI PROVINCE, CHINA
SWIFT:    BKCHCNBJ550
BENEFICIA   
RY’s Name:    Shangrao Jinko Solar Import and Export Co., Ltd
BENEFICIA   
RY’s Name:    Xuri District, Shangrao Economic Development Zone, Jiangxi Province, China
BENEFICIA   
RY’s A/C:    739173935828094038 LOGO

 

 

Authorised Signature

 

**** Confidential material omitted and filed separately with the Commission.

 

26